summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-09-20sched: Protect task->cpus_allowed access in sched_getaffinity()Thomas Gleixner
commit 3160568371da441b7f2fb57f2f1225404207e8f2 upstream sched_getaffinity() is not protected against a concurrent modification of the tasks affinity. Serialize the access with task_rq_lock(task). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20091208202026.769251187@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20x86-64, compat: Retruncate rax after ia32 syscall entry tracingRoland McGrath
commit eefdca043e8391dcd719711716492063030b55ac upstream. In commit d4d6715, we reopened an old hole for a 64-bit ptracer touching a 32-bit tracee in system call entry. A %rax value set via ptrace at the entry tracing stop gets used whole as a 32-bit syscall number, while we only check the low 32 bits for validity. Fix it by truncating %rax back to 32 bits after syscall_trace_enter, in addition to testing the full 64 bits as has already been added. Reported-by: Ben Hawkes <hawkes@sota.gen.nz> Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20compat: Make compat_alloc_user_space() incorporate the access_ok()H. Peter Anvin
commit c41d68a513c71e35a14f66d71782d27a79a81ea6 upstream. compat_alloc_user_space() expects the caller to independently call access_ok() to verify the returned area. A missing call could introduce problems on some architectures. This patch incorporates the access_ok() check into compat_alloc_user_space() and also adds a sanity check on the length. The existing compat_alloc_user_space() implementations are renamed arch_compat_alloc_user_space() and are used as part of the implementation of the new global function. This patch assumes NULL will cause __get_user()/__put_user() to either fail or access userspace on all architectures. This should be followed by checking the return value of compat_access_user_space() for NULL in the callers, at which time the access_ok() in the callers can also be removed. Reported-by: Ben Hawkes <hawkes@sota.gen.nz> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tony Luck <tony.luck@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <jejb@parisc-linux.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20x86-64, compat: Test %rax for the syscall number, not %eaxH. Peter Anvin
commit 36d001c70d8a0144ac1d038f6876c484849a74de upstream. On 64 bits, we always, by necessity, jump through the system call table via %rax. For 32-bit system calls, in theory the system call number is stored in %eax, and the code was testing %eax for a valid system call number. At one point we loaded the stored value back from the stack to enforce zero-extension, but that was removed in checkin d4d67150165df8bf1cc05e532f6efca96f907cab. An actual 32-bit process will not be able to introduce a non-zero-extended number, but it can happen via ptrace. Instead of re-introducing the zero-extension, test what we are actually going to use, i.e. %rax. This only adds a handful of REX prefixes to the code. Reported-by: Ben Hawkes <hawkes@sota.gen.nz> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20x86, tsc: Fix a preemption leak in restore_sched_clock_state()Peter Zijlstra
commit 55496c896b8a695140045099d4e0175cf09d4eae upstream. Doh, a real life genuine preemption leak.. This caused a suspend failure. Reported-bisected-and-tested-by-the-invaluable: Jeff Chua <jeff.chua.linux@gmail.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Nico Schottelius <nico-linux-20100709@schottelius.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Florian Pritz <flo@xssn.at> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Len Brown <lenb@kernel.org> sleep states LKML-Reference: <1284150773.402.122.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20wireless extensions: fix kernel heap content leakJohannes Berg
commit 42da2f948d949efd0111309f5827bf0298bcc9a4 upstream. Wireless extensions have an unfortunate, undocumented requirement which requires drivers to always fill iwp->length when returning a successful status. When a driver doesn't do this, it leads to a kernel heap content leak when userspace offers a larger buffer than would have been necessary. Arguably, this is a driver bug, as it should, if it returns 0, fill iwp->length, even if it separately indicated that the buffer contents was not valid. However, we can also at least avoid the memory content leak if the driver doesn't do this by setting the iwp length to max_tokens, which then reflects how big the buffer is that the driver may fill, regardless of how big the userspace buffer is. To illustrate the point, this patch also fixes a corresponding cfg80211 bug (since this requirement isn't documented nor was ever pointed out by anyone during code review, I don't trust all drivers nor all cfg80211 handlers to implement it correctly). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20ath5k: check return value of ieee80211_get_tx_rateJohn W. Linville
commit d8e1ba76d619dbc0be8fbeee4e6c683b5c812d3a upstream. This avoids a NULL pointer dereference as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=625889 When the WARN condition is hit in ieee80211_get_tx_rate, it will return NULL. So, we need to check the return value and avoid dereferencing it in that case. Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20p54: fix tx feedback status flag checkChristian Lamparter
commit f880c2050f30b23c9b6f80028c09f76e693bf309 upstream. Michael reported that p54* never really entered power save mode, even tough it was enabled. It turned out that upon a power save mode change the firmware will set a special flag onto the last outgoing frame tx status (which in this case is almost always the designated PSM nullfunc frame). This flag confused the driver; It erroneously reported transmission failures to the stack, which then generated the next nullfunc. and so on... Reported-by: Michael Buesch <mb@bu3sch.de> Tested-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20perf: Initialize callchains roots's childen hitsFrederic Weisbecker
commit 5225c45899e872383ca39f5533d28ec63c54b39e upstream. Each histogram entry has a callchain root that stores the callchain samples. However we forgot to initialize the tracking of children hits of these roots, which then got random values on their creation. The root children hits is multiplied by the minimum percentage of hits provided by the user, and the result becomes the minimum hits expected from children branches. If the random value due to the uninitialization is big enough, then this minimum number of hits can be huge and eventually filter every children branches. The end result was invisible callchains. All we need to fix this is to initialize the children hits of the root. Reported-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20memory hotplug: fix next block calculation in is_removableKAMEZAWA Hiroyuki
commit 0dcc48c15f63ee86c2fcd33968b08d651f0360a5 upstream. next_active_pageblock() is for finding next _used_ freeblock. It skips several blocks when it finds there are a chunk of free pages lager than pageblock. But it has 2 bugs. 1. We have no lock. page_order(page) - pageblock_order can be minus. 2. pageblocks_stride += is wrong. it should skip page_order(p) of pages. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20Input: i8042 - fix device removal on unloadDmitry Torokhov
commit af045b86662f17bf130239a65995c61a34f00a6b upstream. We need to call platform_device_unregister(i8042_platform_device) before calling platform_driver_unregister() because i8042_remove() resets i8042_platform_device to NULL. This leaves the platform device instance behind and prevents driver reload. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=16613 Reported-by: Seryodkin Victor <vvscore@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20binfmt_misc: fix binfmt_misc priorityJan Sembera
commit ee3aebdd8f5f8eac41c25c80ceee3d728f920f3b upstream. Commit 74641f584da ("alpha: binfmt_aout fix") (May 2009) introduced a regression - binfmt_misc is now consulted after binfmt_elf, which will unfortunately break ia32el. ia32 ELF binaries on ia64 used to be matched using binfmt_misc and executed using wrapper. As 32bit binaries are now matched by binfmt_elf before bindmt_misc kicks in, the wrapper is ignored. The fix increases precedence of binfmt_misc to the original state. Signed-off-by: Jan Sembera <jsembera@suse.cz> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20kernel/groups.c: fix integer overflow in groups_searchJerome Marchand
commit 1c24de60e50fb19b94d94225458da17c720f0729 upstream. gid_t is a unsigned int. If group_info contains a gid greater than MAX_INT, groups_search() function may look on the wrong side of the search tree. This solves some unfair "permission denied" problems. Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20bounce: call flush_dcache_page() after bounce_copy_vec()Gary King
commit ac8456d6f9a3011c824176bd6084d39e5f70a382 upstream. I have been seeing problems on Tegra 2 (ARMv7 SMP) systems with HIGHMEM enabled on 2.6.35 (plus some patches targetted at 2.6.36 to perform cache maintenance lazily), and the root cause appears to be that the mm bouncing code is calling flush_dcache_page before it copies the bounce buffer into the bio. The bounced page needs to be flushed after data is copied into it, to ensure that architecture implementations can synchronize instruction and data caches if necessary. Signed-off-by: Gary King <gking@nvidia.com> Cc: Tejun Heo <tj@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20mmc: fix the use of kunmap_atomic() in tmio_mmc.hGuennadi Liakhovetski
commit 5600efb1bc2745d93ae0bc08130117a84f2b9d69 upstream. kunmap_atomic() takes the cookie, returned by the kmap_atomic() as its argument and not the page address, used as an argument to kmap_atomic(). This patch fixes the compile error: In file included from drivers/mmc/host/tmio_mmc.c:37: drivers/mmc/host/tmio_mmc.h: In function 'tmio_mmc_kunmap_atomic': drivers/mmc/host/tmio_mmc.h:192: error: negative width in bit-field '<anonymous>' Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Tested-by: Magnus Damm <damm@opensource.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20tmio_mmc: don't clear unhandled pending interruptsYusuke Goda
commit b78d6c5f51935ba89df8db33a57bacb547aa7325 upstream. Previously, it was possible for ack_mmc_irqs() to clear pending interrupt bits in the CTL_STATUS register, even though the interrupt handler had not been called. This was because of a race that existed when doing a read-modify-write sequence on CTL_STATUS. After the read step in this sequence, if an interrupt occurred (causing one of the bits in CTL_STATUS to be set) the write step would inadvertently clear it. Observed with the TMIO_STAT_RXRDY bit together with CMD53 on AR6002 and BCM4318 SDIO cards in polled mode. This patch eliminates this race by only writing to CTL_STATUS and clearing the interrupts that were passed as an argument to ack_mmc_irqs()." [matt@console-pimps.org: rewrote changelog] Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Tested-by: Arnd Hannemann <arnd@arndnet.de> Acked-by: Ian Molton <ian@mnementh.co.uk> Cc: Matt Fleming <matt@console-pimps.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20gcov: fix null-pointer dereference for certain module typesPeter Oberparleiter
commit 85a0fdfd0f967507f3903e8419bc7e408f5a59de upstream. The gcov-kernel infrastructure expects that each object file is loaded only once. This may not be true, e.g. when loading multiple kernel modules which are linked to the same object file. As a result, loading such kernel modules will result in incorrect gcov results while unloading will cause a null-pointer dereference. This patch fixes these problems by changing the gcov-kernel infrastructure so that multiple profiling data sets can be associated with one debugfs entry. It applies to 2.6.36-rc1. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reported-by: Werner Spies <werner.spies@thalesgroup.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20irda: off by oneDan Carpenter
commit cf9b94f88bdbe8a02015fc30d7c232b2d262d4ad upstream. This is an off by one. We would go past the end when we NUL terminate the "value" string at end of the function. The "value" buffer is allocated in irlan_client_parse_response() or irlan_provider_parse_command(). CC: stable@kernel.org Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-20tracing: t_start: reset FTRACE_ITER_HASH in case of seek/preadChris Wright
commit df09162550fbb53354f0c88e85b5d0e6129ee9cc upstream. Be sure to avoid entering t_show() with FTRACE_ITER_HASH set without having properly started the iterator to iterate the hash. This case is degenerate and, as discovered by Robert Swiecki, can cause t_hash_show() to misuse a pointer. This causes a NULL ptr deref with possible security implications. Tracked as CVE-2010-3079. Cc: Robert Swiecki <swiecki@google.com> Cc: Eugene Teo <eugene@redhat.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20tracing: Do not allow llseek to set_ftrace_filterSteven Rostedt
commit 9c55cb12c1c172e2d51e85fbb5a4796ca86b77e7 upstream. Reading the file set_ftrace_filter does three things. 1) shows whether or not filters are set for the function tracer 2) shows what functions are set for the function tracer 3) shows what triggers are set on any functions 3 is independent from 1 and 2. The way this file currently works is that it is a state machine, and as you read it, it may change state. But this assumption breaks when you use lseek() on the file. The state machine gets out of sync and the t_show() may use the wrong pointer and cause a kernel oops. Luckily, this will only kill the app that does the lseek, but the app dies while holding a mutex. This prevents anyone else from using the set_ftrace_filter file (or any other function tracing file for that matter). A real fix for this is to rewrite the code, but that is too much for a -rc release or stable. This patch simply disables llseek on the set_ftrace_filter() file for now, and we can do the proper fix for the next major release. Reported-by: Robert Swiecki <swiecki@google.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Tavis Ormandy <taviso@google.com> Cc: Eugene Teo <eugene@redhat.com> Cc: vendor-sec@lst.de Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20tracing: Fix a race in function profileLi Zefan
commit 3aaba20f26f58843e8f20611e5c0b1c06954310f upstream. While we are reading trace_stat/functionX and someone just disabled function_profile at that time, we can trigger this: divide error: 0000 [#1] PREEMPT SMP ... EIP is at function_stat_show+0x90/0x230 ... This fix just takes the ftrace_profile_lock and checks if rec->counter is 0. If it's 0, we know the profile buffer has been reset. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4C723644.4040708@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20libata: skip EH autopsy and recovery during suspendTejun Heo
commit e2f3d75fc0e4a0d03c61872bad39ffa2e74a04ff upstream. For some mysterious reason, certain hardware reacts badly to usual EH actions while the system is going for suspend. As the devices won't be needed until the system is resumed, ask EH to skip usual autopsy and recovery and proceed directly to suspend. Signed-off-by: Tejun Heo <tj@kernel.org> Tested-by: Stephan Diestelhorst <stephan.diestelhorst@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20HID: fix suspend crash by moving initializations earlierAlan Stern
commit fde4e2f73208b8f34f123791e39c0cb6bc74b32a upstream. Although the usbhid driver allocates its usbhid structure in the probe routine, several critical fields in that structure don't get initialized until usbhid_start(). However if report descriptor parsing fails then usbhid_start() is never called. This leads to problems during system suspend -- the system will freeze. This patch (as1378) fixes the bug by moving the initialization statements up into usbhid_probe(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Bruno Prémont <bonbons@linux-vserver.org> Tested-By: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20HID: usbhid: initialize interface pointers early enoughJiri Kosina
commit 57ab12e418ec4fe24c11788bb1bbdabb29d05679 upstream. Move the initialization of USB interface pointers from _start() over to _probe() callback, which is where it belongs. This fixes case where interface is NULL when parsing of report descriptor fails. LKML-Reference: <20100213135720.603e5f64@neptune.home> Reported-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20oprofile, x86: fix init_sysfs() function stubRobert Richter
commit 269f45c25028c75fe10e6d9be86e7202ab461fbc upstream. The use of the return value of init_sysfs() with commit 10f0412 oprofile, x86: fix init_sysfs error handling discovered the following build error for !CONFIG_PM: .../linux/arch/x86/oprofile/nmi_int.c: In function ‘op_nmi_init’: .../linux/arch/x86/oprofile/nmi_int.c:784: error: expected expression before ‘do’ make[2]: *** [arch/x86/oprofile/nmi_int.o] Error 1 make[1]: *** [arch/x86/oprofile] Error 2 This patch fixes this. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20oprofile, x86: fix init_sysfs error handlingRobert Richter
commit 10f0412f57f2a76a90eff4376f59cbb0a39e4e18 upstream. On failure init_sysfs() might not properly free resources. The error code of the function is not checked. And, when reinitializing the exit function might be called twice. This patch fixes all this. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20oprofile: fix crash when accessing freed task structsRobert Richter
commit 750d857c682f4db60d14722d430c7ccc35070962 upstream. This patch fixes a crash during shutdown reported below. The crash is caused by accessing already freed task structs. The fix changes the order for registering and unregistering notifier callbacks. All notifiers must be initialized before buffers start working. To stop buffer synchronization we cancel all workqueues, unregister the notifier callback and then flush all buffers. After all of this we finally can free all tasks listed. This should avoid accessing freed tasks. On 22.07.10 01:14:40, Benjamin Herrenschmidt wrote: > So the initial observation is a spinlock bad magic followed by a crash > in the spinlock debug code: > > [ 1541.586531] BUG: spinlock bad magic on CPU#5, events/5/136 > [ 1541.597564] Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6d03 > > Backtrace looks like: > > spin_bug+0x74/0xd4 > ._raw_spin_lock+0x48/0x184 > ._spin_lock+0x10/0x24 > .get_task_mm+0x28/0x8c > .sync_buffer+0x1b4/0x598 > .wq_sync_buffer+0xa0/0xdc > .worker_thread+0x1d8/0x2a8 > .kthread+0xa8/0xb4 > .kernel_thread+0x54/0x70 > > So we are accessing a freed task struct in the work queue when > processing the samples. Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20tun: Don't add sysfs attributes to devices without sysfs directoriesBen Hutchings
This applies to 2.6.32 *only*. It has not been applied upstream since the limitation no longer exists. Prior to Linux 2.6.35, net devices outside the initial net namespace did not have sysfs directories. Attempting to add attributes to them will trigger a BUG(). Reported-and-tested-by: Russell Stuart <russell-debian@stuart.id.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20sysfs: checking for NULL instead of ERR_PTRDan Carpenter
commit 57f9bdac2510cd7fda58e4a111d250861eb1ebeb upstream. d_path() returns an ERR_PTR and it doesn't return NULL. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20ALSA: seq/oss - Fix double-free at error path of snd_seq_oss_open()Takashi Iwai
commit 27f7ad53829f79e799a253285318bff79ece15bd upstream. The error handling in snd_seq_oss_open() has several bad codes that do dereferecing released pointers and double-free of kmalloc'ed data. The object dp is release in free_devinfo() that is called via private_free callback. The rest shouldn't touch this object any more. The patch changes delete_port() to call kfree() in any case, and gets rid of unnecessary calls of destructors in snd_seq_oss_open(). Fixes CVE-2010-3080. Reported-and-tested-by: Tavis Ormandy <taviso@cmpxchg8b.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20ALSA: hda - Fix auto-parser of ALC269vb for HP pin NID 0x21Kailang Yang
commit 531d8791accf1464bc6854ff69d08dd866189d17 upstream. ALC269vb has an alternative HP pin 0x21 in addition. Fix the parser to recognize it. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: cdc-acm: Fixing crash when ACM probing interfaces with no endpoint ↵Toby Gray
descriptors. commit 577045c0a76e34294f902a7d5d60e90b04d094d0 upstream. Certain USB devices, such as the Nokia X6 mobile phone, don't expose any endpoint descriptors on some of their interfaces. If the ACM driver is forced to probe all interfaces on a device the a NULL pointer dereference will occur when the ACM driver attempts to use the endpoint of the alternative settings. One way to get the ACM driver to probe all the interfaces is by using the /sys/bus/usb/drivers/cdc_acm/new_id interface. This patch checks that the endpoint pointer for the current alternate settings is non-NULL before using it. Signed-off-by: Toby Gray <toby.gray@realvnc.com> Cc: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: cdc-acm: Add pseudo modem without AT command capabilitiesPhilippe Corbes
commit 5b239f0aebd4dd6f85b13decf5e18e86e35d57f0 upstream. cdc-acm.c : Manage pseudo-modem without AT commands capabilities Enable to drive electronic simple gadgets based on microcontrolers. The Interface descriptor is like this: bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 0 None Signed-off-by: Philippe Corbes <philippe.corbes@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: cdc-acm: Adding second ACM channel support for various Nokia and one ↵Toby Gray
Samsung phones commit 4035e45632c2a8bb4edae83c20447051bd9a9604 upstream. S60 phones from Nokia and Samsung expose two ACM channels. The first is a modem with a standard AT-command interface, which is picked up correctly by CDC-ACM. The second ACM port is marked as having a vendor-specific protocol. This means that the ACM driver will not claim the second channel by default. This adds support for the second ACM channel for the following devices: Nokia E63 Nokia E75 Nokia 6760 Slide Nokia E52 Nokia E55 Nokia E72 Nokia X6 Nokia N97 Mini Nokia 5800 Xpressmusic Nokia E90 Samsung GTi8510 (INNOV8) Signed-off-by: Toby Gray <toby.gray@realvnc.com> Cc: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: Expose vendor-specific ACM channel on Nokia 5230Przemo Firszt
commit 83a4eae9aeed4a69e89e323a105e653ae06e7c1f upstream. Nokia S60 phones expose two ACM channels. The first is a modem, the second is 'vendor-specific' but is treated as a serial device at the S60 end, so we want to expose it on Linux too. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: cdc-acm: add another device quirkRuss Nelson
commit c3baa19b0a9b711b02cec81d9fea33b7b9628957 upstream. The Maretron USB100 needs this quirk in order to work properly. Signed-off-by: Russ Nelson <nelson@crynwr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: Exposing second ACM channel as tty for Nokia S60 phones.Adrian Taylor
commit c1479a92cf0a7792298d364e44a781550621cb58 upstream. Nokia S60 phones expose two ACM channels. The first is a modem and is picked up by the standard AT-command interface information in the CDC-ACM driver. The second is marked as having a vendor-specific protocol. Normally, we don't expose those as ttys. (On some other devices, they may be claimed by the rndis_host driver and used as a network interface). But on S60 this second ACM channel is the way that third-party S60 application developers are expected to communicate over USB. It acts as a serial device at the S60 end, and so it should on Linux too. The list of devices is largely derived from: http://wiki.forum.nokia.com/index.php/S60_Platform_and_device_identification_codes http://wiki.forum.nokia.com/index.php/Nokia_USB_Product_IDs and includes only the S60 3rd Edition+ devices documented there. There are many devices for which the USB device ID is not documented, including: Nokia 6290 Nokia E63 Nokia 5630 XpressMusic Nokia 5730 XpressMusic Nokia 6710 Navigator Nokia 6720 classic Nokia 6730 Classic Nokia 6760 slide Nokia 6790 slide Nokia 6790 Surge Nokia E52 Nokia E55 Nokia E71x (AT&T) Nokia E72 Nokia E75 Nokia E75 US+LTA variant Nokia N79 Nokia N86 8MP Nokia 5230 (RM-588) Nokia 5230 (RM-594) Nokia 5530 XpressMusic Nokia 5530 XpressMusic (china) Nokia 5800 XM Nokia N97 (RM-506) Nokia N97 mini Nokia X6 It would be good to add those subsequently. Signed-off-by: Adrian Taylor <aat@realvnc.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20usb: serial: mos7840: Add USB IDs to support more B&B USB/RS485 converters.Dave Ludlow
commit 870408c8291015872a7a0b583673a9e56b3e73f4 upstream. Add the USB IDs needed to support the B&B USOPTL4-4P, USO9ML2-2P, and USO9ML2-4P. This patch expands and corrects a typo in the patch sent on 08-31-2010. Signed-off-by: Dave Ludlow <dave.ludlow@bay.ws> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: mos7840: fix DMA buffers on stack and endianess bugsJohan Hovold
commit 9e221a35f82cbef0397d81fed588bafba95b550c upstream. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20usb: serial: mos7840: Add USB ID to support the B&B Electronics USOPTL4-2P.Dave Ludlow
commit caf3a636a9f809fdca5fa746e6687096457accb1 upstream. Add the USB ID needed to support B&B Electronic's 2-port, optically-isolated, powered, USB to RS485 converter. Signed-off-by: Dave Ludlow <dave.ludlow@bay.ws> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: serial: Extra device/vendor ID for mos7840 driverBlaise Gassend
commit 27f1281d5f72e4f161e215ccad3d7d86b9e624a9 upstream. Signed-off-by: Blaise Gassend <blaise.gasend_linux@m4x.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: ftdi_sio: Added custom PIDs for ChamSys productsLuke Lowrey
commit 657373883417b2618023fd4135d251ba06a2c30a upstream. Added the 0xDAF8 to 0xDAFF PID range for ChamSys limited USB interface/wing products Signed-off-by: Luke Lowrey <luke@chamsys.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: cp210x: Add B&G H3000 link cable IDJason Detring
commit 0bf7a81c5d447c21db434be35363c44c0a30f598 upstream. This is the cable between an H3000 navigation unit and a multi-function display. http://www.bandg.com/en/Products/H3000/Spares-and-Accessories/Cables/H3000-CPU-USB-Cable-Pack/ Signed-off-by: Jason Detring <jason.detring@navico.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: CP210x Add new device IDCraig Shelley
commit 541e05ec3add5ab5bcf238d60161b53480280b20 upstream. New device ID added for Balluff RFID reader. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: Fix kernel oops with g_ether and WindowsMaxim Osipov
commit 037d3656adbd7e8cb848f01cf5dec423ed76bbe7 upstream. Please find attached patch for https://bugzilla.kernel.org/show_bug.cgi?id=16023 problem. Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: ehci-ppc-of: problems in unwindDan Carpenter
commit 08a3b3b1c2e622e378d9086aee9e2e42ce37591d upstream. The iounmap(ehci->ohci_hcctrl_reg); should be the first thing we do because the ioremap() was the last thing we did. Also if we hit any of the goto statements in the original code then it would have led to a NULL dereference of "ehci". This bug was introduced in: 796bcae7361c "USB: powerpc: Workaround for the PPC440EPX USBH_23 errata [take 3]" I modified the few lines in front a little so that my code didn't obscure the return success code path. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20ocfs2: Fix incorrect checksum validation errorSunil Mushran
commit f5ce5a08a40f2086435858ddc80cb40394b082eb upstream. For local mounts, ocfs2_read_locked_inode() calls ocfs2_read_blocks_sync() to read the inode off the disk. The latter first checks to see if that block is cached in the journal, and, if so, returns that block. That is ok. But ocfs2_read_locked_inode() goes wrong when it tries to validate the checksum of such blocks. Blocks that are cached in the journal may not have had their checksum computed as yet. We should not validate the checksums of such blocks. Fixes ossbz#1282 http://oss.oracle.com/bugzilla/show_bug.cgi?id=1282 Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Singed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20ath9k_hw: fix parsing of HT40 5 GHz CTLsLuis R. Rodriguez
commit 904879748d7439a6dabdc6be9aad983e216b027d upstream. The 5 GHz CTL indexes were not being read for all hardware devices due to the masking out through the CTL_MODE_M mask being one bit too short. Without this the calibrated regulatory maximum values were not being picked up when devices operate on 5 GHz in HT40 mode. The final output power used for Atheros devices is the minimum between the calibrated CTL values and what CRDA provides. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20fuse: flush background queue on connection closeMiklos Szeredi
commit 595afaf9e6ee1b48e13ec4b8bcc8c7dee888161a upstream. David Bartly reported that fuse can hang in fuse_get_req_nofail() when the connection to the filesystem server is no longer active. If bg_queue is not empty then flush_bg_queue() called from request_end() can put more requests on to the pending queue. If this happens while ending requests on the processing queue then those background requests will be queued to the pending list and never ended. Another problem is that fuse_dev_release() didn't wake up processes sleeping on blocked_waitq. Solve this by: a) flushing the background queue before calling end_requests() on the pending and processing queues b) setting blocked = 0 and waking up processes waiting on blocked_waitq() Thanks to David for an excellent bug report. Reported-by: David Bartley <andareed@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20staging: hv: Fixed lockup problem with bounce_buffer scatter listHank Janssen
commit 77c5ceaff31645ea049c6706b99e699eae81fb88 upstream. Fixed lockup problem with bounce_buffer scatter list which caused crashes in heavy loads. And minor code indentation cleanup in effected area. Removed whitespace and noted minor indentation changes in description as pointed out by Joe Perches. (Thanks for reviewing Joe) Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-08-13 11:00:49 +0000