summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-13Merge tag 'v4.4.121' into toradex_vf_4.4-nextColibri-VF_LXDE-Image_2.8b2.97-20180331Max Krummenacher
This is the 4.4.121 stable release
2018-03-11Linux 4.4.121v4.4.121Greg Kroah-Hartman
2018-03-11btrfs: preserve i_mode if __btrfs_set_acl() failsErnesto A. Fernández
commit d7d824966530acfe32b94d1ed672e6fe1638cd68 upstream. When changing a file's acl mask, btrfs_set_acl() will first set the group bits of i_mode to the value of the mask, and only then set the actual extended attribute representing the new acl. If the second part fails (due to lack of space, for example) and the file had no acl attribute to begin with, the system will from now on assume that the mask permission bits are actual group permission bits, potentially granting access to the wrong users. Prevent this by restoring the original mode bits if __btrfs_set_acl fails. Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11bpf, x64: implement retpoline for tail callDaniel Borkmann
[ upstream commit a493a87f38cfa48caaa95c9347be2d914c6fdf29 ] Implement a retpoline [0] for the BPF tail call JIT'ing that converts the indirect jump via jmp %rax that is used to make the long jump into another JITed BPF image. Since this is subject to speculative execution, we need to control the transient instruction sequence here as well when CONFIG_RETPOLINE is set, and direct it into a pause + lfence loop. The latter aligns also with what gcc / clang emits (e.g. [1]). JIT dump after patch: # bpftool p d x i 1 0: (18) r2 = map[id:1] 2: (b7) r3 = 0 3: (85) call bpf_tail_call#12 4: (b7) r0 = 2 5: (95) exit With CONFIG_RETPOLINE: # bpftool p d j i 1 [...] 33: cmp %edx,0x24(%rsi) 36: jbe 0x0000000000000072 |* 38: mov 0x24(%rbp),%eax 3e: cmp $0x20,%eax 41: ja 0x0000000000000072 | 43: add $0x1,%eax 46: mov %eax,0x24(%rbp) 4c: mov 0x90(%rsi,%rdx,8),%rax 54: test %rax,%rax 57: je 0x0000000000000072 | 59: mov 0x28(%rax),%rax 5d: add $0x25,%rax 61: callq 0x000000000000006d |+ 66: pause | 68: lfence | 6b: jmp 0x0000000000000066 | 6d: mov %rax,(%rsp) | 71: retq | 72: mov $0x2,%eax [...] * relative fall-through jumps in error case + retpoline for indirect jump Without CONFIG_RETPOLINE: # bpftool p d j i 1 [...] 33: cmp %edx,0x24(%rsi) 36: jbe 0x0000000000000063 |* 38: mov 0x24(%rbp),%eax 3e: cmp $0x20,%eax 41: ja 0x0000000000000063 | 43: add $0x1,%eax 46: mov %eax,0x24(%rbp) 4c: mov 0x90(%rsi,%rdx,8),%rax 54: test %rax,%rax 57: je 0x0000000000000063 | 59: mov 0x28(%rax),%rax 5d: add $0x25,%rax 61: jmpq *%rax |- 63: mov $0x2,%eax [...] * relative fall-through jumps in error case - plain indirect jump as before [0] https://support.google.com/faqs/answer/7625886 [1] https://github.com/gcc-mirror/gcc/commit/a31e654fa107be968b802786d747e962c2fcdb2b Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11dm io: fix duplicate bio completion due to missing ref countMike Snitzer
commit feb7695fe9fb83084aa29de0094774f4c9d4c9fc upstream. If only a subset of the devices associated with multiple regions support a given special operation (eg. DISCARD) then the dec_count() that is used to set error for the region must increment the io->count. Otherwise, when the dec_count() is called it can cause the dm-io caller's bio to be completed multiple times. As was reported against the dm-mirror target that had mirror legs with a mix of discard capabilities. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=196077 Reported-by: Zhang Yi <yizhan@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11mpls, nospec: Sanitize array index in mpls_label_ok()Dan Williams
commit 3968523f855050b8195134da951b87c20bd66130 upstream. mpls_label_ok() validates that the 'platform_label' array index from a userspace netlink message payload is valid. Under speculation the mpls_label_ok() result may not resolve in the CPU pipeline until after the index is used to access an array element. Sanitize the index to zero to prevent userspace-controlled arbitrary out-of-bounds speculation, a precursor for a speculative execution side channel vulnerability. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 4.4: - mpls_label_ok() doesn't take an extack parameter - Drop change in mpls_getroute()] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11net: mpls: Pull common label check into helperDavid Ahern
commit b7b386f42f079b25b942c756820e36c6bd09b2ca upstream. mpls_route_add and mpls_route_del have the same checks on the label. Move to a helper. Avoid duplicate extack messages in the next patch. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11sctp: verify size of a new chunk in _sctp_make_chunk()Alexey Kodanev
[ Upstream commit 07f2c7ab6f8d0a7e7c5764c4e6cc9c52951b9d9c ] When SCTP makes INIT or INIT_ACK packet the total chunk length can exceed SCTP_MAX_CHUNK_LEN which leads to kernel panic when transmitting these packets, e.g. the crash on sending INIT_ACK: [ 597.804948] skbuff: skb_over_panic: text:00000000ffae06e4 len:120168 put:120156 head:000000007aa47635 data:00000000d991c2de tail:0x1d640 end:0xfec0 dev:<NULL> ... [ 597.976970] ------------[ cut here ]------------ [ 598.033408] kernel BUG at net/core/skbuff.c:104! [ 600.314841] Call Trace: [ 600.345829] <IRQ> [ 600.371639] ? sctp_packet_transmit+0x2095/0x26d0 [sctp] [ 600.436934] skb_put+0x16c/0x200 [ 600.477295] sctp_packet_transmit+0x2095/0x26d0 [sctp] [ 600.540630] ? sctp_packet_config+0x890/0x890 [sctp] [ 600.601781] ? __sctp_packet_append_chunk+0x3b4/0xd00 [sctp] [ 600.671356] ? sctp_cmp_addr_exact+0x3f/0x90 [sctp] [ 600.731482] sctp_outq_flush+0x663/0x30d0 [sctp] [ 600.788565] ? sctp_make_init+0xbf0/0xbf0 [sctp] [ 600.845555] ? sctp_check_transmitted+0x18f0/0x18f0 [sctp] [ 600.912945] ? sctp_outq_tail+0x631/0x9d0 [sctp] [ 600.969936] sctp_cmd_interpreter.isra.22+0x3be1/0x5cb0 [sctp] [ 601.041593] ? sctp_sf_do_5_1B_init+0x85f/0xc30 [sctp] [ 601.104837] ? sctp_generate_t1_cookie_event+0x20/0x20 [sctp] [ 601.175436] ? sctp_eat_data+0x1710/0x1710 [sctp] [ 601.233575] sctp_do_sm+0x182/0x560 [sctp] [ 601.284328] ? sctp_has_association+0x70/0x70 [sctp] [ 601.345586] ? sctp_rcv+0xef4/0x32f0 [sctp] [ 601.397478] ? sctp6_rcv+0xa/0x20 [sctp] ... Here the chunk size for INIT_ACK packet becomes too big, mostly because of the state cookie (INIT packet has large size with many address parameters), plus additional server parameters. Later this chunk causes the panic in skb_put_data(): skb_packet_transmit() sctp_packet_pack() skb_put_data(nskb, chunk->skb->data, chunk->skb->len); 'nskb' (head skb) was previously allocated with packet->size from u16 'chunk->chunk_hdr->length'. As suggested by Marcelo we should check the chunk's length in _sctp_make_chunk() before trying to allocate skb for it and discard a chunk if its size bigger than SCTP_MAX_CHUNK_LEN. Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leinter@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11s390/qeth: fix IPA command submission raceJulian Wiedmann
[ Upstream commit d22ffb5a712f9211ffd104c38fc17cbfb1b5e2b0 ] If multiple IPA commands are build & sent out concurrently, fill_ipacmd_header() may assign a seqno value to a command that's different from what send_control_data() later assigns to this command's reply. This is due to other commands passing through send_control_data(), and incrementing card->seqno.ipa along the way. So one IPA command has no reply that's waiting for its seqno, while some other IPA command has multiple reply objects waiting for it. Only one of those waiting replies wins, and the other(s) times out and triggers a recovery via send_ipa_cmd(). Fix this by making sure that the same seqno value is assigned to a command and its reply object. Do so immediately before submitting the command & while holding the irq_pending "lock", to produce nicely ascending seqnos. As a side effect, *all* IPA commands now use a reply object that's waiting for its actual seqno. Previously, early IPA commands that were submitted while the card was still DOWN used the "catch-all" IDX seqno. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11s390/qeth: fix SETIP command handlingJulian Wiedmann
[ Upstream commit 1c5b2216fbb973a9410e0b06389740b5c1289171 ] send_control_data() applies some special handling to SETIP v4 IPA commands. But current code parses *all* command types for the SETIP command code. Limit the command code check to IPA commands. Fixes: 5b54e16f1a54 ("qeth: do not spin for SETIP ip assist command") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11sctp: fix dst refcnt leak in sctp_v6_get_dst()Alexey Kodanev
[ Upstream commit 957d761cf91cdbb175ad7d8f5472336a4d54dbf2 ] When going through the bind address list in sctp_v6_get_dst() and the previously found address is better ('matchlen > bmatchlen'), the code continues to the next iteration without releasing currently held destination. Fix it by releasing 'bdst' before continue to the next iteration, and instead of introducing one more '!IS_ERR(bdst)' check for dst_release(), move the already existed one right after ip6_dst_lookup_flow(), i.e. we shouldn't proceed further if we get an error for the route lookup. Fixes: dbc2b5e9a09e ("sctp: fix src address selection if using secondary addresses for ipv6") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11sctp: fix dst refcnt leak in sctp_v4_get_dstTommi Rantala
[ Upstream commit 4a31a6b19f9ddf498c81f5c9b089742b7472a6f8 ] Fix dst reference count leak in sctp_v4_get_dst() introduced in commit 410f03831 ("sctp: add routing output fallback"): When walking the address_list, successive ip_route_output_key() calls may return the same rt->dst with the reference incremented on each call. The code would not decrement the dst refcount when the dst pointer was identical from the previous iteration, causing the dst refcnt leak. Testcase: ip netns add TEST ip netns exec TEST ip link set lo up ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add dummy2 type dummy ip link set dev dummy0 netns TEST ip link set dev dummy1 netns TEST ip link set dev dummy2 netns TEST ip netns exec TEST ip addr add 192.168.1.1/24 dev dummy0 ip netns exec TEST ip link set dummy0 up ip netns exec TEST ip addr add 192.168.1.2/24 dev dummy1 ip netns exec TEST ip link set dummy1 up ip netns exec TEST ip addr add 192.168.1.3/24 dev dummy2 ip netns exec TEST ip link set dummy2 up ip netns exec TEST sctp_test -H 192.168.1.2 -P 20002 -h 192.168.1.1 -p 20000 -s -B 192.168.1.3 ip netns del TEST In 4.4 and 4.9 kernels this results to: [ 354.179591] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 364.419674] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 374.663664] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 384.903717] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 395.143724] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 405.383645] unregister_netdevice: waiting for lo to become free. Usage count = 1 ... Fixes: 410f03831 ("sctp: add routing output fallback") Fixes: 0ca50d12f ("sctp: fix src address selection if using secondary addresses") Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11udplite: fix partial checksum initializationAlexey Kodanev
[ Upstream commit 15f35d49c93f4fa9875235e7bf3e3783d2dd7a1b ] Since UDP-Lite is always using checksum, the following path is triggered when calculating pseudo header for it: udp4_csum_init() or udp6_csum_init() skb_checksum_init_zero_check() __skb_checksum_validate_complete() The problem can appear if skb->len is less than CHECKSUM_BREAK. In this particular case __skb_checksum_validate_complete() also invokes __skb_checksum_complete(skb). If UDP-Lite is using partial checksum that covers only part of a packet, the function will return bad checksum and the packet will be dropped. It can be fixed if we skip skb_checksum_init_zero_check() and only set the required pseudo header checksum for UDP-Lite with partial checksum before udp4_csum_init()/udp6_csum_init() functions return. Fixes: ed70fcfcee95 ("net: Call skb_checksum_init in IPv4") Fixes: e4f45b7f40bd ("net: Call skb_checksum_init in IPv6") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11ppp: prevent unregistered channels from connecting to PPP unitsGuillaume Nault
[ Upstream commit 77f840e3e5f09c6d7d727e85e6e08276dd813d11 ] PPP units don't hold any reference on the channels connected to it. It is the channel's responsibility to ensure that it disconnects from its unit before being destroyed. In practice, this is ensured by ppp_unregister_channel() disconnecting the channel from the unit before dropping a reference on the channel. However, it is possible for an unregistered channel to connect to a PPP unit: register a channel with ppp_register_net_channel(), attach a /dev/ppp file to it with ioctl(PPPIOCATTCHAN), unregister the channel with ppp_unregister_channel() and finally connect the /dev/ppp file to a PPP unit with ioctl(PPPIOCCONNECT). Once in this situation, the channel is only held by the /dev/ppp file, which can be released at anytime and free the channel without letting the parent PPP unit know. Then the ppp structure ends up with dangling pointers in its ->channels list. Prevent this scenario by forbidding unregistered channels from connecting to PPP units. This maintains the code logic by keeping ppp_unregister_channel() responsible from disconnecting the channel if necessary and avoids modification on the reference counting mechanism. This issue seems to predate git history (successfully reproduced on Linux 2.6.26 and earlier PPP commits are unrelated). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11netlink: ensure to loop over all netns in genlmsg_multicast_allns()Nicolas Dichtel
[ Upstream commit cb9f7a9a5c96a773bbc9c70660dc600cfff82f82 ] Nowadays, nlmsg_multicast() returns only 0 or -ESRCH but this was not the case when commit 134e63756d5f was pushed. However, there was no reason to stop the loop if a netns does not have listeners. Returns -ESRCH only if there was no listeners in all netns. To avoid having the same problem in the future, I didn't take the assumption that nlmsg_multicast() returns only 0 or -ESRCH. Fixes: 134e63756d5f ("genetlink: make netns aware") CC: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11net: ipv4: don't allow setting net.ipv4.route.min_pmtu below 68Sabrina Dubroca
[ Upstream commit c7272c2f1229125f74f22dcdd59de9bbd804f1c8 ] According to RFC 1191 sections 3 and 4, ICMP frag-needed messages indicating an MTU below 68 should be rejected: A host MUST never reduce its estimate of the Path MTU below 68 octets. and (talking about ICMP frag-needed's Next-Hop MTU field): This field will never contain a value less than 68, since every router "must be able to forward a datagram of 68 octets without fragmentation". Furthermore, by letting net.ipv4.route.min_pmtu be set to negative values, we can end up with a very large PMTU when (-1) is cast into u32. Let's also make ip_rt_min_pmtu a u32, since it's only ever compared to unsigned ints. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11net: fix race on decreasing number of TX queuesJakub Kicinski
[ Upstream commit ac5b70198adc25c73fba28de4f78adcee8f6be0b ] netif_set_real_num_tx_queues() can be called when netdev is up. That usually happens when user requests change of number of channels/rings with ethtool -L. The procedure for changing the number of queues involves resetting the qdiscs and setting dev->num_tx_queues to the new value. When the new value is lower than the old one, extra care has to be taken to ensure ordering of accesses to the number of queues vs qdisc reset. Currently the queues are reset before new dev->num_tx_queues is assigned, leaving a window of time where packets can be enqueued onto the queues going down, leading to a likely crash in the drivers, since most drivers don't check if TX skbs are assigned to an active queue. Fixes: e6484930d7c7 ("net: allocate tx queues in register_netdevice") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11ipv6 sit: work around bogus gcc-8 -Wrestrict warningArnd Bergmann
[ Upstream commit ca79bec237f5809a7c3c59bd41cd0880aa889966 ] gcc-8 has a new warning that detects overlapping input and output arguments in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(), which is actually correct: net/ipv6/sit.c: In function 'sit_init_net': net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] The problem here is that the logic detecting the memcpy() arguments finds them to be the same, but the conditional that tests for the input and output of ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant. We know that netdev_priv(t->dev) is the same as t for a tunnel device, and comparing "dev" directly here lets the compiler figure out as well that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so it no longer warns. This code is old, so Cc stable to make sure that we don't get the warning for older kernels built with new gcc. Cc: Martin Sebor <msebor@gmail.com> Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11hdlc_ppp: carrier detect ok, don't turn off negotiationDenis Du
[ Upstream commit b6c3bad1ba83af1062a7ff6986d9edc4f3d7fc8e ] Sometimes when physical lines have a just good noise to make the protocol handshaking fail, but the carrier detect still good. Then after remove of the noise, nobody will trigger this protocol to be start again to cause the link to never come back. The fix is when the carrier is still on, not terminate the protocol handshaking. Signed-off-by: Denis Du <dudenis2000@yahoo.ca> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11fib_semantics: Don't match route with mismatching tclassidStefano Brivio
[ Upstream commit a8c6db1dfd1b1d18359241372bb204054f2c3174 ] In fib_nh_match(), if output interface or gateway are passed in the FIB configuration, we don't have to check next hops of multipath routes to conclude whether we have a match or not. However, we might still have routes with different realms matching the same output interface and gateway configuration, and this needs to cause the match to fail. Otherwise the first route inserted in the FIB will match, regardless of the realms: # ip route add 1.1.1.1 dev eth0 table 1234 realms 1/2 # ip route append 1.1.1.1 dev eth0 table 1234 realms 3/4 # ip route list table 1234 1.1.1.1 dev eth0 scope link realms 1/2 1.1.1.1 dev eth0 scope link realms 3/4 # ip route del 1.1.1.1 dev ens3 table 1234 realms 3/4 # ip route list table 1234 1.1.1.1 dev ens3 scope link realms 3/4 whereas route with realms 3/4 should have been deleted instead. Explicitly check for fc_flow passed in the FIB configuration (this comes from RTA_FLOW extracted by rtm_to_fib_config()) and fail matching if it differs from nh_tclassid. The handling of RTA_FLOW for multipath routes later in fib_nh_match() is still needed, as we can have multiple RTA_FLOW attributes that need to be matched against the tclassid of each next hop. v2: Check that fc_flow is set before discarding the match, so that the user can still select the first matching rule by not specifying any realm, as suggested by David Ahern. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11bridge: check brport attr show in brport_showXin Long
[ Upstream commit 1b12580af1d0677c3c3a19e35bfe5d59b03f737f ] Now br_sysfs_if file flush doesn't have attr show. To read it will cause kernel panic after users chmod u+r this file. Xiong found this issue when running the commands: ip link add br0 type bridge ip link add type veth ip link set veth0 master br0 chmod u+r /sys/devices/virtual/net/veth0/brport/flush timeout 3 cat /sys/devices/virtual/net/veth0/brport/flush kernel crashed with NULL a pointer dereference call trace. This patch is to fix it by return -EINVAL when brport_attr->show is null, just the same as the check for brport_attr->store in brport_store(). Fixes: 9cf637473c85 ("bridge: add sysfs hook to flush forwarding table") Reported-by: Xiong Zhou <xzhou@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11Revert "led: core: Fix brightness setting when setting delay_off=0"Ben Hutchings
This reverts commit 20ac8f72514b3af8b62c520d55656ded865eff00, which was commit 2b83ff96f51d0b039c4561b9f95c824d7bddb85c upstream. The bug that it should fix was only introduced in Linux 4.7, and in 4.4 it causes a regression. Reported-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11x86/spectre: Fix an error messageDan Carpenter
commit 9de29eac8d2189424d81c0d840cd0469aa3d41c8 upstream. If i == ARRAY_SIZE(mitigation_options) then we accidentally print garbage from one space beyond the end of the mitigation_options[] array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: KarimAllah Ahmed <karahmed@amazon.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-janitors@vger.kernel.org Fixes: 9005c6834c0f ("x86/spectre: Simplify spectre_v2 command line parsing") Link: http://lkml.kernel.org/r/20180214071416.GA26677@mwanda Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11leds: do not overflow sysfs buffer in led_trigger_showNathan Sullivan
commit 3b9b95363c45365d606ad4bbba16acca75fdf6d3 upstream. Per the documentation, use scnprintf instead of sprintf to ensure there is never more than PAGE_SIZE bytes of trigger names put into the buffer. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11x86/apic/vector: Handle legacy irq data correctlyThomas Gleixner
The backport of upstream commit 45d55e7bac40 ("x86/apic/vector: Fix off by one in error path") missed to fixup the legacy interrupt data which is not longer available upstream. Handle legacy irq data correctly by clearing the legacy storage to prevent use after free. Fixes: 7fd133539289 ("x86/apic/vector: Fix off by one in error path") - 4.4.y Fixes: c557481a9491 ("x86/apic/vector: Fix off by one in error path") - 4.9.y Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11ARM: dts: LogicPD Torpedo: Fix I2C1 pinmuxAdam Ford
commit 74402055a2d3ec998a1ded599e86185a27d9bbf4 upstream. The pinmuxing was missing for I2C1 which was causing intermittent issues with the PMIC which is connected to I2C1. The bootloader did not quite configure the I2C1 either, so when running at 2.6MHz, it was generating errors at time. This correctly sets the I2C1 pinmuxing so it can operate at 2.6MHz Fixes: 687c27676151 ("ARM: dts: Add minimal support for LogicPD Torpedo DM3730 devkit") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11btrfs: Don't clear SGID when inheriting ACLsJan Kara
commit b7f8a09f8097db776b8d160862540e4fc1f51296 upstream. When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by moving posix_acl_update_mode() out of __btrfs_set_acl() into btrfs_set_acl(). That way the function will not be called when inheriting ACLs which is what we want as it prevents SGID bit clearing and the mode has been properly set by posix_acl_create() anyway. Fixes: 073931017b49d9458aa351605b43a7e34598caef CC: stable@vger.kernel.org CC: linux-btrfs@vger.kernel.org CC: David Sterba <dsterba@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11x86/syscall: Sanitize syscall table de-references under speculation fixJiri Slaby
In 4.4.118, we have commit c8961332d6da (x86/syscall: Sanitize syscall table de-references under speculation), which is a backport of upstream commit 2fbd7af5af86. But it fixed only the C part of the upstream patch -- the IA32 sysentry. So it ommitted completely the assembly part -- the 64bit sysentry. Fix that in this patch by explicit array_index_mask_nospec written in assembly. The same was used in lib/getuser.S. However, to have "sbb" working properly, we have to switch from "cmp" against (NR_syscalls-1) to (NR_syscalls), otherwise the last syscall number would be "and"ed by 0. It is because the original "ja" relies on "CF" or "ZF", but we rely only on "CF" in "sbb". That means: switch to "jae" conditional jump too. Final note: use rcx for mask as this is exactly what is overwritten by the 4th syscall argument (r10) right after. Reported-by: Jan Beulich <JBeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: kernel-hardening@lists.openwall.com Cc: gregkh@linuxfoundation.org Cc: Andy Lutomirski <luto@kernel.org> Cc: alan@linux.intel.com Cc: Jinpu Wang <jinpu.wang@profitbricks.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11KVM: mmu: Fix overlap between public and private memslotsWanpeng Li
commit b28676bb8ae4569cced423dc2a88f7cb319d5379 upstream. Reported by syzkaller: pte_list_remove: ffff9714eb1f8078 0->BUG ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/mmu.c:1157! invalid opcode: 0000 [#1] SMP RIP: 0010:pte_list_remove+0x11b/0x120 [kvm] Call Trace: drop_spte+0x83/0xb0 [kvm] mmu_page_zap_pte+0xcc/0xe0 [kvm] kvm_mmu_prepare_zap_page+0x81/0x4a0 [kvm] kvm_mmu_invalidate_zap_all_pages+0x159/0x220 [kvm] kvm_arch_flush_shadow_all+0xe/0x10 [kvm] kvm_mmu_notifier_release+0x6c/0xa0 [kvm] ? kvm_mmu_notifier_release+0x5/0xa0 [kvm] __mmu_notifier_release+0x79/0x110 ? __mmu_notifier_release+0x5/0x110 exit_mmap+0x15a/0x170 ? do_exit+0x281/0xcb0 mmput+0x66/0x160 do_exit+0x2c9/0xcb0 ? __context_tracking_exit.part.5+0x4a/0x150 do_group_exit+0x50/0xd0 SyS_exit_group+0x14/0x20 do_syscall_64+0x73/0x1f0 entry_SYSCALL64_slow_path+0x25/0x25 The reason is that when creates new memslot, there is no guarantee for new memslot not overlap with private memslots. This can be triggered by the following program: #include <fcntl.h> #include <pthread.h> #include <setjmp.h> #include <signal.h> #include <stddef.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> #include <linux/kvm.h> long r[16]; int main() { void *p = valloc(0x4000); r[2] = open("/dev/kvm", 0); r[3] = ioctl(r[2], KVM_CREATE_VM, 0x0ul); uint64_t addr = 0xf000; ioctl(r[3], KVM_SET_IDENTITY_MAP_ADDR, &addr); r[6] = ioctl(r[3], KVM_CREATE_VCPU, 0x0ul); ioctl(r[3], KVM_SET_TSS_ADDR, 0x0ul); ioctl(r[6], KVM_RUN, 0); ioctl(r[6], KVM_RUN, 0); struct kvm_userspace_memory_region mr = { .slot = 0, .flags = KVM_MEM_LOG_DIRTY_PAGES, .guest_phys_addr = 0xf000, .memory_size = 0x4000, .userspace_addr = (uintptr_t) p }; ioctl(r[3], KVM_SET_USER_MEMORY_REGION, &mr); return 0; } This patch fixes the bug by not adding a new memslot even if it overlaps with private memslots. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
2018-03-11ARM: mvebu: Fix broken PL310_ERRATA_753970 selectsUlf Magnusson
commit 8aa36a8dcde3183d84db7b0d622ffddcebb61077 upstream. The MACH_ARMADA_375 and MACH_ARMADA_38X boards select ARM_ERRATA_753970, but it was renamed to PL310_ERRATA_753970 by commit fa0ce4035d48 ("ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds"). Fix the selects to use the new name. Discovered with the https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py script. Fixes: fa0ce4035d48 ("ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds" cc: stable@vger.kernel.org Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11nospec: Allow index argument to have const-qualified typeRasmus Villemoes
commit b98c6a160a057d5686a8c54c79cc6c8c94a7d0c8 upstream. The last expression in a statement expression need not be a bare variable, quoting gcc docs The last thing in the compound statement should be an expression followed by a semicolon; the value of this subexpression serves as the value of the entire construct. and we already use that in e.g. the min/max macros which end with a ternary expression. This way, we can allow index to have const-qualified type, which will in some cases avoid the need for introducing a local copy of index of non-const qualified type. That, in turn, can prevent readers not familiar with the internals of array_index_nospec from wondering about the seemingly redundant extra variable, and I think that's worthwhile considering how confusing the whole _nospec business is. The expression _i&_mask has type unsigned long (since that is the type of _mask, and the BUILD_BUG_ONs guarantee that _i will get promoted to that), so in order not to change the type of the whole expression, add a cast back to typeof(_i). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arch@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/151881604837.17395.10812767547837568328.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11media: m88ds3103: don't call a non-initalized functionMauro Carvalho Chehab
commit b9c97c67fd19262c002d94ced2bfb513083e161e upstream. If m88d3103 chip ID is not recognized, the device is not initialized. However, it returns from probe without any error, causing this OOPS: [ 7.689289] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 7.689297] pgd = 7b0bd7a7 [ 7.689302] [00000000] *pgd=00000000 [ 7.689318] Internal error: Oops: 80000005 [#1] SMP ARM [ 7.689322] Modules linked in: dvb_usb_dvbsky(+) m88ds3103 dvb_usb_v2 dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_core crc32_arm_ce videodev media [ 7.689358] CPU: 3 PID: 197 Comm: systemd-udevd Not tainted 4.15.0-mcc+ #23 [ 7.689361] Hardware name: BCM2835 [ 7.689367] PC is at 0x0 [ 7.689382] LR is at m88ds3103_attach+0x194/0x1d0 [m88ds3103] [ 7.689386] pc : [<00000000>] lr : [<bf0ae1ec>] psr: 60000013 [ 7.689391] sp : ed8e5c20 ip : ed8c1e00 fp : ed8945c0 [ 7.689395] r10: ed894000 r9 : ed894378 r8 : eda736c0 [ 7.689400] r7 : ed894070 r6 : ed8e5c44 r5 : bf0bb040 r4 : eda77600 [ 7.689405] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eda77600 [ 7.689412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 7.689417] Control: 10c5383d Table: 2d8e806a DAC: 00000051 [ 7.689423] Process systemd-udevd (pid: 197, stack limit = 0xe9dbfb63) [ 7.689428] Stack: (0xed8e5c20 to 0xed8e6000) [ 7.689439] 5c20: ed853a80 eda73640 ed894000 ed8942c0 ed853a80 bf0b9e98 ed894070 bf0b9f10 [ 7.689449] 5c40: 00000000 00000000 bf08c17c c08dfc50 00000000 00000000 00000000 00000000 [ 7.689459] 5c60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689468] 5c80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689479] 5ca0: 00000000 00000000 ed8945c0 ed8942c0 ed894000 ed894830 bf0b9e98 00000000 [ 7.689490] 5cc0: ed894378 bf0a3cb4 bf0bc3b0 0000533b ed920540 00000000 00000034 bf0a6434 [ 7.689500] 5ce0: ee952070 ed826600 bf0a7038 bf0a2dd8 00000001 bf0a6768 bf0a2f90 ed8943c0 [ 7.689511] 5d00: 00000000 c08eca68 ed826620 ed826620 00000000 ee952070 bf0bc034 ee952000 [ 7.689521] 5d20: ed826600 bf0bb080 ffffffed c0aa9e9c c0aa9dac ed826620 c16edf6c c168c2c8 [ 7.689531] 5d40: c16edf70 00000000 bf0bc034 0000000d 00000000 c08e268c bf0bb080 ed826600 [ 7.689541] 5d60: bf0bc034 ed826654 ed826620 bf0bc034 c164c8bc 00000000 00000001 00000000 [ 7.689553] 5d80: 00000028 c08e2948 00000000 bf0bc034 c08e2848 c08e0778 ee9f0a58 ed88bab4 [ 7.689563] 5da0: bf0bc034 ed90ba80 c168c1f0 c08e1934 bf0bb3bc c17045ac bf0bc034 c164c8bc [ 7.689574] 5dc0: bf0bc034 bf0bb3bc ed91f564 c08e34ec bf0bc000 c164c8bc bf0bc034 c0aa8dc4 [ 7.689584] 5de0: ffffe000 00000000 bf0bf000 ed91f600 ed91f564 c03021e4 00000001 00000000 [ 7.689595] 5e00: c166e040 8040003f ed853a80 bf0bc448 00000000 c1678174 ed853a80 f0f22000 [ 7.689605] 5e20: f0f21fff 8040003f 014000c0 ed91e700 ed91e700 c16d8e68 00000001 ed91e6c0 [ 7.689615] 5e40: bf0bc400 00000001 bf0bc400 ed91f564 00000001 00000000 00000028 c03c9a24 [ 7.689625] 5e60: 00000001 c03c8c94 ed8e5f50 ed8e5f50 00000001 bf0bc400 ed91f540 c03c8cb0 [ 7.689637] 5e80: bf0bc40c 00007fff bf0bc400 c03c60b0 00000000 bf0bc448 00000028 c0e09684 [ 7.689647] 5ea0: 00000002 bf0bc530 c1234bf8 bf0bc5dc bf0bc514 c10ebbe8 ffffe000 bf000000 [ 7.689657] 5ec0: 00011538 00000000 ed8e5f48 00000000 00000000 00000000 00000000 00000000 [ 7.689666] 5ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689676] 5f00: 00000000 00000000 7fffffff 00000000 00000013 b6e55a18 0000017b c0309104 [ 7.689686] 5f20: ed8e4000 00000000 00510af0 c03c9430 7fffffff 00000000 00000003 00000000 [ 7.689697] 5f40: 00000000 f0f0f000 00011538 00000000 f0f107b0 f0f0f000 00011538 f0f1fdb8 [ 7.689707] 5f60: f0f1fbe8 f0f1b974 00004000 000041e0 bf0bc3d0 00000001 00000000 000024c4 [ 7.689717] 5f80: 0000002d 0000002e 00000019 00000000 00000010 00000000 16894000 00000000 [ 7.689727] 5fa0: 00000000 c0308f20 16894000 00000000 00000013 b6e55a18 00000000 b6e5652c [ 7.689737] 5fc0: 16894000 00000000 00000000 0000017b 00020000 00508110 00000000 00510af0 [ 7.689748] 5fe0: bef68948 bef68938 b6e4d3d0 b6d32590 60000010 00000013 00000000 00000000 [ 7.689790] [<bf0ae1ec>] (m88ds3103_attach [m88ds3103]) from [<bf0b9f10>] (dvbsky_s960c_attach+0x78/0x280 [dvb_usb_dvbsky]) [ 7.689821] [<bf0b9f10>] (dvbsky_s960c_attach [dvb_usb_dvbsky]) from [<bf0a3cb4>] (dvb_usbv2_probe+0xa3c/0x1024 [dvb_usb_v2]) [ 7.689849] [<bf0a3cb4>] (dvb_usbv2_probe [dvb_usb_v2]) from [<c0aa9e9c>] (usb_probe_interface+0xf0/0x2a8) [ 7.689869] [<c0aa9e9c>] (usb_probe_interface) from [<c08e268c>] (driver_probe_device+0x2f8/0x4b4) [ 7.689881] [<c08e268c>] (driver_probe_device) from [<c08e2948>] (__driver_attach+0x100/0x11c) [ 7.689895] [<c08e2948>] (__driver_attach) from [<c08e0778>] (bus_for_each_dev+0x4c/0x9c) [ 7.689909] [<c08e0778>] (bus_for_each_dev) from [<c08e1934>] (bus_add_driver+0x1c0/0x264) [ 7.689919] [<c08e1934>] (bus_add_driver) from [<c08e34ec>] (driver_register+0x78/0xf4) [ 7.689931] [<c08e34ec>] (driver_register) from [<c0aa8dc4>] (usb_register_driver+0x70/0x134) [ 7.689946] [<c0aa8dc4>] (usb_register_driver) from [<c03021e4>] (do_one_initcall+0x44/0x168) [ 7.689963] [<c03021e4>] (do_one_initcall) from [<c03c9a24>] (do_init_module+0x64/0x1f4) [ 7.689979] [<c03c9a24>] (do_init_module) from [<c03c8cb0>] (load_module+0x20a0/0x25c8) [ 7.689993] [<c03c8cb0>] (load_module) from [<c03c9430>] (SyS_finit_module+0xb4/0xec) [ 7.690007] [<c03c9430>] (SyS_finit_module) from [<c0308f20>] (ret_fast_syscall+0x0/0x54) [ 7.690018] Code: bad PC value This may happen on normal circumstances, if, for some reason, the demod hangs and start returning an invalid chip ID: [ 10.394395] m88ds3103 3-0068: Unknown device. Chip_id=00 So, change the logic to cause probe to fail with -ENODEV, preventing the OOPS. Detected while testing DVB MMAP patches on Raspberry Pi 3 with DVBSky S960CI. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11cpufreq: s3c24xx: Fix broken s3c_cpufreq_init()Viresh Kumar
commit 0373ca74831b0f93cd4cdbf7ad3aec3c33a479a5 upstream. commit a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()" accidentally broke cpufreq on s3c2410 and s3c2412. These two platforms don't have a CPU frequency table and used to skip calling cpufreq_table_validate_and_show() for them. But with the above commit, we started calling it unconditionally and that will eventually fail as the frequency table pointer is NULL. Fix this by calling cpufreq_table_validate_and_show() conditionally again. Fixes: a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()" Cc: 3.13+ <stable@vger.kernel.org> # v3.13+ Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11ALSA: hda: Add a power_save blacklistHans de Goede
commit 1ba8f9d308174e647b864c36209b4d7934d99888 upstream. On some boards setting power_save to a non 0 value leads to clicking / popping sounds when ever we enter/leave powersaving mode. Ideally we would figure out how to avoid these sounds, but that is not always feasible. This commit adds a blacklist for devices where powersaving is known to cause problems and disables it on these devices. Note I tried to put this blacklist in userspace first: https://github.com/systemd/systemd/pull/8128 But the systemd maintainers rightfully pointed out that it would be impossible to then later remove entries once we actually find a way to make power-saving work on listed boards without issues. Having this list in the kernel will allow removal of the blacklist entry in the same commit which fixes the clicks / plops. The blacklist only applies to the default power_save module-option value, if a user explicitly sets the module-option then the blacklist is not used. [ added an ifdef CONFIG_PM for the build error -- tiwai] BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198611 Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11ALSA: usb-audio: Add a quirck for B&W PX headphonesErik Veijola
commit 240a8af929c7c57dcde28682725b29cf8474e8e5 upstream. The capture interface doesn't work and the playback interface only supports 48 kHz sampling rate even though it advertises more rates. Signed-off-by: Erik Veijola <erik.veijola@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11tpm_i2c_nuvoton: fix potential buffer overruns caused by bit glitches on the busJeremy Boone
commit f9d4d9b5a5ef2f017bc344fb65a58a902517173b upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11tpm_i2c_infineon: fix potential buffer overruns caused by bit glitches on ↵Jeremy Boone
the bus commit 9b8cb28d7c62568a5916bdd7ea1c9176d7f8f2ed upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11tpm: st33zp24: fix potential buffer overruns caused by bit glitches on the busJeremy Boone
commit 6d24cd186d9fead3722108dec1b1c993354645ff upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03Linux 4.4.120v4.4.120Greg Kroah-Hartman
2018-03-03MIPS: Implement __multi3 for GCC7 MIPS64r6 buildsJames Hogan
commit ebabcf17bcd7ce968b1631ebe08236275698f39b upstream. GCC7 is a bit too eager to generate suboptimal __multi3 calls (128bit multiply with 128bit result) for MIPS64r6 builds, even in code which doesn't explicitly use 128bit types, such as the following: unsigned long func(unsigned long a, unsigned long b) { return a > (~0UL) / b; } Which GCC rearanges to: return (unsigned __int128)a * (unsigned __int128)b > 0xffffffffffffffff; Therefore implement __multi3, but only for MIPS64r6 with GCC7 as under normal circumstances we wouldn't expect any calls to __multi3 to be generated from kernel code. Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: James Hogan <jhogan@kernel.org> Tested-by: Waldemar Brodkorb <wbx@openadk.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maciej W. Rozycki <macro@mips.com> Cc: Matthew Fortune <matthew.fortune@mips.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17890/ Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03net: gianfar_ptp: move set_fipers() to spinlock protecting areaYangbo Lu
[ Upstream commit 11d827a993a969c3c6ec56758ff63a44ba19b466 ] set_fipers() calling should be protected by spinlock in case that any interrupt breaks related registers setting and the function we expect. This patch is to move set_fipers() to spinlock protecting area in ptp_gianfar_adjtime(). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03sctp: make use of pre-calculated lenMarcelo Ricardo Leitner
[ Upstream commit c76f97c99ae6d26d14c7f0e50e074382bfbc9f98 ] Some sockopt handling functions were calculating the length of the buffer to be written to userspace and then calculating it again when actually writing the buffer, which could lead to some write not using an up-to-date length. This patch updates such places to just make use of the len variable. Also, replace some sizeof(type) to sizeof(var). Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03xen/gntdev: Fix partial gntdev_mmap() cleanupRoss Lagerwall
[ Upstream commit cf2acf66ad43abb39735568f55e1f85f9844e990 ] When cleaning up after a partially successful gntdev_mmap(), unmap the successfully mapped grant pages otherwise Xen will kill the domain if in debug mode (Attempt to implicitly unmap a granted PTE) or Linux will kill the process and emit "BUG: Bad page map in process" if Xen is in release mode. This is only needed when use_ptemod is true because gntdev_put_map() will unmap grant pages itself when use_ptemod is false. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03xen/gntdev: Fix off-by-one error when unmapping with holesRoss Lagerwall
[ Upstream commit 951a010233625b77cde3430b4b8785a9a22968d1 ] If the requested range has a hole, the calculation of the number of pages to unmap is off by one. Fix it. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03SolutionEngine771x: fix Ether platform dataSergei Shtylyov
[ Upstream commit 195e2addbce09e5afbc766efc1e6567c9ce840d3 ] The 'sh_eth' driver's probe() method would fail on the SolutionEngine7710 board and crash on SolutionEngine7712 board as the platform code is hopelessly behind the driver's platform data -- it passes the PHY address instead of 'struct sh_eth_plat_data *'; pass the latter to the driver in order to fix the bug... Fixes: 71557a37adb5 ("[netdrvr] sh_eth: Add SH7619 support") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03mdio-sun4i: Fix a memory leakChristophe JAILLET
[ Upstream commit 56c0290202ab94a2f2780c449395d4ae8495fab4 ] If the probing of the regulator is deferred, the memory allocated by 'mdiobus_alloc_size()' will be leaking. It should be freed before the next call to 'sun4i_mdio_probe()' which will reallocate it. Fixes: 4bdcb1dd9feb ("net: Add MDIO bus driver for the Allwinner EMAC") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03xen-netfront: enable device after manual module loadEduardo Otubo
[ Upstream commit b707fda2df4070785d0fa8a278aa13944c5f51f8 ] When loading the module after unloading it, the network interface would not be enabled and thus wouldn't have a backend counterpart and unable to be used by the guest. The guest would face errors like: [root@guest ~]# ethtool -i eth0 Cannot get driver information: No such device [root@guest ~]# ifconfig eth0 eth0: error fetching interface information: Device not found This patch initializes the state of the netfront device whenever it is loaded manually, this state would communicate the netback to create its device and establish the connection between them. Signed-off-by: Eduardo Otubo <otubo@redhat.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine.Venkat Duvvuru
[ Upstream commit 78f300049335ae81a5cc6b4b232481dc5e1f9d41 ] In bnxt_vf_ndo_prep (which is called by bnxt_get_vf_config ndo), there is a check for "Invalid VF id". Currently, the check is done against max_vfs. However, the user doesn't always create max_vfs. So, the check should be against the created number of VFs. The number of bnxt_vf_info structures that are allocated in bnxt_alloc_vf_resources routine is the "number of requested VFs". So, if an "invalid VF id" falls between the requested number of VFs and the max_vfs, the driver will be dereferencing an invalid pointer. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Venkat Devvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03can: flex_can: Correct the checking for frame length in flexcan_start_xmit()Luu An Phu
[ Upstream commit 13454c14550065fcc1705d6bd4ee6d40e057099f ] The flexcan_start_xmit() function compares the frame length with data register length to write frame content into data[0] and data[1] register. Data register length is 4 bytes and frame maximum length is 8 bytes. Fix the check that compares frame length with 3. Because the register length is 4. Signed-off-by: Luu An Phu <phu.luuan@nxp.com> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03mac80211: mesh: drop frames appearing to be from usJohannes Berg
[ Upstream commit 736a80bbfda709fb3631f5f62056f250a38e5804 ] If there are multiple mesh stations with the same MAC address, they will both get confused and start throwing warnings. Obviously in this case nothing can actually work anyway, so just drop frames that look like they're from ourselves early on. Reported-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-03 22:42:52 +0000