Age | Commit message (Collapse) | Author |
|
Modified the mmc_poweroff to resume before sending the poweroff
notification command. In sleep mode only AWAKE and RESET commands are
allowed, so before sending the poweroff notification command resume from
sleep mode and then send the notification command.
PowerOff Notify is tested on a Synopsis Designware Host Controller
(eMMC 4.5). The suspend to RAM and resume works fine.
Change-Id: Ib4642a29e423aee6041a92cc72a388d677674ae3
Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Tested-by: Girish K S <girish.shivananjappa@linaro.org>
Reviewed-by: Saugata Das <saugata.das@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Bug 1007644
Bug 936069
Signed-off-by: Pavan Kunapuli <pkunapuli@nvidia.com>
Change-Id: I2e3d421c82eb765cb640876691ffe4818d7e146b
Reviewed-on: http://git-master/r/118918
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Min-wuk Lee <mlee@nvidia.com>
Reviewed-by: Naveen Kumar Arepalli <naveenk@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
|
|
Host may now use MMC_CAP2_NO_SLEEP_CMD to disable the use
of eMMC sleep/awake command.
This option can be used when your platform has a buggy
kernel crash dump software, which is supposed to store
the dump on the eMMC, but is not able to wake up the eMMC
from sleep state.
In particular, failures have been seen with u-boot; even if
it is fixed there, platforms will be slow to update their
bootloader binaries.
Change-Id: I403f4b2a231dde087095a660189dc2f4e79edfd5
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Reviewed-by: Hanumath Prasad <hanumath.prasad@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Acked-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Bug 1007644
Bug 936069
Signed-off-by: Pavan Kunapuli <pkunapuli@nvidia.com>
Change-Id: I8b2834e154e338a97bd6d82f177809d47d318ff0
Reviewed-on: http://git-master/r/118914
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
If eMMC sleep support is enabled, set MMC_PM_KEEP_POWER
to avoid host power off and power on. Instead, restore
the host context in resume.
Bug 1007644
Bug 936069
Change-Id: I74578bb1f9e297b3af6bd79b9215364334984836
Signed-off-by: Pavan Kunapuli <pkunapuli@nvidia.com>
Reviewed-on: http://git-master/r/118913
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Min-wuk Lee <mlee@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
|
|
1) After remote wakeup resume code is not waiting until
RESUME and SUSPEND bit cleared. Instead it is waiting
for RESUME bit to get set. This is updated properly now.
2) During resume, no need to depend on port speed to
take HSIC in high speed.
Bug 1019619
Change-Id: I3d06255da65045bdf5c6a4deb10a3c6f96aef661
Signed-off-by: Vinod Atyam <vatyam@nvidia.com>
Reviewed-on: http://git-master/r/118582
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
Change the Drive strength of DAP1 for I2S to operate in both
master and slave mode.
Changed the Pull Up/Down mechanism for I2S4 to operate in master/slave
mode.
Bug 1009249
Signed-off-by: Nitin Pai <npai@nvidia.com>
Reviewed-on: http://git-master/r/114587
(cherry picked from commit 29ec5dfb81b823880f393bece5daf5396ef77629)
Change-Id: I24a252370b993150a553c9f81fb44e6d8f86589a
Reviewed-on: http://git-master/r/118251
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
For SDIO devices, MMC_PM_KEEP_POWER would be set
by wifi driver during suspend. It need not be set
by default.
Bug 1011349
Change-Id: I779a438b45afed2cc0fd7283d89c24e9049cfe39
Signed-off-by: Pavan Kunapuli <pkunapuli@nvidia.com>
Reviewed-on: http://git-master/r/118954
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Naveen Kumar Arepalli <naveenk@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
The dvfs system require the regulator for regulating
the voltage. The regulator should be enable before
using it to make sure the reference count enabling rail
of that rail should be properly counted.
Change-Id: Ib8b673ecb7939ac80f46bdf90ffec27b8f62df6b
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/118598
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Fixing host transmission with HS enabled.
Bug 999141
Change-Id: I9dcc5282971830865dacf16dbbbebf4096aeb00e
Signed-off-by: Animesh Kishore <ankishore@nvidia.com>
Reviewed-on: http://git-master/r/118315
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
audio_clock_2x parent needs to be set first before
changing the rate, else it will not work.
Bug 1019017
Signed-off-by: Nitin Pai <npai@nvidia.com>
Reviewed-on: http://git-master/r/116682
(cherry picked from commit fdc4da6d96e7be4aa2accf098de48543e745cf11)
Change-Id: I93aeb1afed8732e8a1b1cff4ab03b9a9f654804f
Reviewed-on: http://git-master/r/118250
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bob Johnston <bjohnston@nvidia.com>
Reviewed-by: Varun Wadekar <vwadekar@nvidia.com>
|
|
-enable warnings as errors compilation flag
-handle error of uninitialised variable
bug 949219
Change-Id: I9e754b1cbf086f99433d47aef793a8635185a25e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/118239
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Sanjay Singh Rawat <srawat@nvidia.com>
Tested-by: Sanjay Singh Rawat <srawat@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Add profile [0, 0, 0] which effectively disables runnable threads
Bug 1003531
Change-Id: Ia45e533d5a6531b06c44c6d95f2f7cfd93cf976e
Signed-off-by: Xiao Bo Zhao <xiaoboz@nvidia.com>
Reviewed-on: http://git-master/r/118219
Reviewed-by: Aleksandr Frid <afrid@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: Diwakar Tundlam <dtundlam@nvidia.com>
|
|
Added different bias levels to RT and added the option to
modify the bias level through sysfs knobs
Bug 1003531
Reviewed-on: http://git-master/r/114271
Reviewed-by: Aleksandr Frid <afrid@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Xiao Bo Zhao <xiaoboz@nvidia.com>
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
(cherry picked from commit 654bc674034f384d8826806fb443d4e9c67b9b3b)
Change-Id: I2e647a65fb89926dd9f0b2ac3edc3dca8eb659a1
Reviewed-on: http://git-master/r/118201
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Aleksandr Frid <afrid@nvidia.com>
Tested-by: Xiao Bo Zhao <xiaoboz@nvidia.com>
Reviewed-by: Diwakar Tundlam <dtundlam@nvidia.com>
Reviewed-by: Sai Gurrappadi <sgurrappadi@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Power off the card when wifi is off and power up only when wifi
is turned on
Bug 1011349
Change-Id: I26a8188d932516c0490dec858acd9e8ea2c5adf8
Signed-off-by: Om Prakash Singh <omp@nvidia.com>
Reviewed-on: http://git-master/r/118097
Reviewed-by: Pavan Kunapuli <pkunapuli@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Tested-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
|
|
Currently app profile is only supported for AP37
hence added sysfs knob that uses cpu_speedo_id in
order to check app profile support
Bug 1003531
Change-Id: I12b9bc1700b3c925a1f1d51bb00584e7e5d6f0a3
Signed-off-by: Xiao Bo Zhao <xiaoboz@nvidia.com>
Reviewed-on: http://git-master/r/117852
Reviewed-by: Aleksandr Frid <afrid@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: Diwakar Tundlam <dtundlam@nvidia.com>
|
|
Add silicon aging for VDD_CPU, this recovers some of millivolts based on
the age of the chip.
BUG 1006420
Change-Id: Idddb5861ab039e7ece262dec3697a69c3534ccf2
Signed-off-by: Anshul Jain <anshulj@nvidia.com>
Reviewed-on: http://git-master/r/116911
Reviewed-by: Aleksandr Frid <afrid@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Diwakar Tundlam <dtundlam@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
Initialize graphic and video input clocks in to safe frequency ranges.
bug 966041
Change-Id: I48a035b42bad5a6d36f56e2b0610baf0703c3bcd
Signed-off-by: Jong Kim <jongk@nvidia.com>
Reviewed-on: http://git-master/r/117484
Reviewed-by: Lokesh Pathak <lpathak@nvidia.com>
Tested-by: Lokesh Pathak <lpathak@nvidia.com>
|
|
enable using frame rate information in 3d frequency scaling by default
Bug 991589
Change-Id: I410c86e3a56ddf00610133333dd518b4f46aa9ec
Reviewed-on: http://git-master/r/116867
Reviewed-by: Lokesh Pathak <lpathak@nvidia.com>
Tested-by: Lokesh Pathak <lpathak@nvidia.com>
|
|
adding support for using a throughput hint given by the tegra-gfx misc
device in the 3d scaling code. If throughput hint usage is enabled and
the latest throughput hint is recent enough (less than 1 second old),
the throughput hint is used to control 3d frequency scaling. Otherwise
the existing idle time percentage estimate is used.
Bug 991589
Change-Id: I68893e5ce7ef922b95ce5f5b3664eb8e1fdd4027
Signed-off-by: Ilan Aelion <iaelion@nvidia.com>
Reviewed-on: http://git-master/r/116866
Reviewed-by: Lokesh Pathak <lpathak@nvidia.com>
Tested-by: Lokesh Pathak <lpathak@nvidia.com>
|
|
For accurate Dots-per-inch computation we need to report height/width for
the E1506 panel.
Bug 1014380.
Change-Id: Ic78b6843f65f44d6162e3c4313aae37bd0e96ba1
Signed-off-by: Rakesh Iyer <riyer@nvidia.com>
Reviewed-on: http://git-master/r/118438
Reviewed-by: Lokesh Pathak <lpathak@nvidia.com>
Tested-by: Lokesh Pathak <lpathak@nvidia.com>
|
|
regsiter android switch device which is used to convey device plug-in
and plug-out to userspace.
Bugs 1009921, 1019877
Change-Id: I8e3c2fce420cc0ce094a6d8f2cf00abb630fcf2f
Reviewed-on: http://git-master/r/119033
Tested-by: Ravindra Lokhande <rlokhande@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Scott Peterson <speterson@nvidia.com>
Reviewed-by: Vijay Mali <vmali@nvidia.com>
|
|
When a Tegra GPIO is used as an IRQ, it should be enabled as a GPIO (so
the pinmux module isn't driving it as an output) and configured as a GPIO
input (so the GPIO module isn't driving it as an output). Set this up
automatically whenever an IRQ is requested, so that users of IRQs don't
need to do this.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
Change-Id: I5159fe099e483145977ecdba63a2bc4302105932
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/118658
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Stephen Warren <swarren@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
Create all resource require for spi transfer before registering
spi master as the spi communication is possible during the
registration.
bug 1023003
Change-Id: I1f77385866f358effeffb89c6af53a6a2f1c8738
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/118267
|
|
bug 1010916
Change-Id: I6d01e8d19be1583b7454cc731f8f30ec58eec672
Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Reviewed-on: http://git-master/r/117338
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Venkat Moganty <vmoganty@nvidia.com>
|
|
As part of this patch following changes are made:
1. HSIC regulator enable/disable is added
2. HSIC phy close is added.
bug 1010916
Change-Id: I4607a3ac13417a201b62708c6fef5d1117dfdcc5
Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Reviewed-on: http://git-master/r/116984
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Venkat Moganty <vmoganty@nvidia.com>
|
|
Remove the ad-hoc scale factor of final latency allowance.
Scale the fifo size to pretend that our FIFO is only as deep
as the lowest fullness we expect to see.
Bug 995270
Change-Id: I78ed2246d2031a2303f81a19fe05c95572a692b0
Signed-off-by: Michael Frydrych <mfrydrych@nvidia.com>
Reviewed-on: http://git-master/r/118816
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-by: Graziano Misuraca <gmisuraca@nvidia.com>
Tested-by: Graziano Misuraca <gmisuraca@nvidia.com>
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
|
|
Bug 1022877
Change-Id: I9200d3345a933ab0ccb31f833184ee4a621228f0
Reviewed-on: http://git-master/r/118774
Reviewed-by: Aleksandr Frid <afrid@nvidia.com>
Reviewed-by: Sang-Hun Lee <sanlee@nvidia.com>
Tested-by: Sang-Hun Lee <sanlee@nvidia.com>
Reviewed-by: Prajakta Gudadhe <pgudadhe@nvidia.com>
|
|
Creates a miscdev at /dev/tegra-throughput which gl will use to set a
target frame rate. In addition it receives notifications from dc on
flip events. On each notification the percentage ratio of the actual
frame time to the target frame time is calculated. In subsequent
changes this ratio will be reported to other modules as a throughput
hint.
Bug 991589
Change-Id: Ieaa2b2755b63d2d071de31e3ef819d4c3b51a956
Signed-off-by: Ilan Aelion <iaelion@nvidia.com>
Reviewed-on: http://git-master/r/116865
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Diwakar Tundlam <dtundlam@nvidia.com>
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
|
|
1) Enable bsea/vcp clocks for Audio support by ioctl
2) Send kernel event NVE276_OS_INTERRUPT_APP_NOTIFY
to user space
3) Suspend Resume support
bug 964514
Change-Id: I72fb790baa093b4bcd99a128c886dc049fa0fbb6
Signed-off-by: Vandana Salve <vsalve@nvidia.com>
Reviewed-on: http://git-master/r/108493
cherry picked from commit 4432c5fa5e9072ff019d994f3bc8239bd34ddad1
Reviewed-on: http://git-master/r/114589
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
page list array size greater than PAGE_SIZE should use vmalloc.
Change-Id: Ic03668ba7ff716bfb3cc08aaef5f86214ee0a9df
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-on: http://git-master/r/116875
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Hiroshi Doyu <hdoyu@nvidia.com>
Tested-by: Hiroshi Doyu <hdoyu@nvidia.com>
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
(cherry picked from commit ddacaacd2a9fff10187e026eaa0d898694eeb95f)
Reviewed-on: http://git-master/r/118194
|
|
Any alloc request, with size greater than PAGE_SIZE, to
slab allocator is not guarnateed to succeed, even though
enough memory is available, as memory can get fully fragmented
over the time.
This allows finding the slab allocator requests with size
greater than PAGE_SIZE early and avoid finding issues much late
in product life cyle.
Change-Id: Ibf13e626a671d41569415a56e775ac5e96b90ba3
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-on: http://git-master/r/116855
GVS: Gerrit_Virtual_Submit
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
(cherry picked from commit 604a65f8e3c9472886b48b1a287f78f11235d1ce)
Reviewed-on: http://git-master/r/118193
Reviewed-by: Alex Waterman <alexw@nvidia.com>
|
|
Even though config option is enabled, the fault injection is not
enabled by default. It need to be enabled through debugfs interface
during test.
Change-Id: Iaba52d27a97bc4ecdc04e79e29ab25e03438bbc0
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-on: http://git-master/r/116851
GVS: Gerrit_Virtual_Submit
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
(cherry picked from commit 892f0239562de8cd5a6a93deeaec826e45b368b0)
Reviewed-on: http://git-master/r/118192
|
|
Read the RUN bit and update it properly.
Remove unused variable.
Change-Id: I1df5dc99ce40e2ca15f0ade28d156a7262467519
Signed-off-by: Suresh Mangipudi <smangipudi@nvidia.com>
Reviewed-on: http://git-master/r/117958
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
CONFIG_TEGRA_CBUS_CLOCK_DIVIDER=1
* Disabled CONFIG_TEGRA_SE_ON_CBUS
So that se clock can be derived from clocks
other than which are driving cbus.
* Changed CONFIG_TEGRA_CBUS_CLOCK_DIVIDER=1
So that pllc can run at same frequency as
cbus is running at.
Bug 978870
Change-Id: I66898e3f16adad3625efb1a484b438c168419a68
Signed-off-by: Mohit Kataria <mkataria@nvidia.com>
Reviewed-on: http://git-master/r/117995
(cherry picked from commit b5d42b0432119ddebcc38f6f40761e3dea3d9f6d)
Reviewed-on: http://git-master/r/117312
GVS: Gerrit_Virtual_Submit
Reviewed-by: Varun Wadekar <vwadekar@nvidia.com>
|
|
Tegra 3 version: TF_TEGRA3_AB01.11.35578, TF_TEGRA3_AB01.11p1.35578
TF_TEGRA3_AB01.11p2.36386, TF_TEGRA3_AB01.11p3.36518
TF_TEGRA3_AB01.11p4.36577, TF_TEGRA3_AB01.11p5.36677
1)Add memory profiling tool to debug secure services's stack and heap
2)Add support to enable dynamic clock gating feature in PL310 register
3)TEE client API at kernel level
4)Stable FIQ debugging (SDK ver 1.09)
5)clrex stability change
6)GIC controller stability settings
7)Fix LP1
8)Fix floating pt support
Bug 1021831
Change-Id: I5c2a693a27dc591b62863aa0fe4ff65163e67aba
Signed-off-by: Karan Jhavar <kjhavar@nvidia.com>
Reviewed-on: http://git-master/r/117515
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Hyung Taek Ryoo <hryoo@nvidia.com>
Reviewed-by: Marvin Zhang <mzhang@nvidia.com>
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
When EHCI host controller driver examines qh/qtd descriptors, driver
might see stale data in cache on some ARM CPU. This patch introduces
two helper functions, ehci_sync_qh() and ehci_sync_qtd(), to
invalidate cached descriptors so that driver can always read
up-to-date descriptors from memory.
Bug 1005403
Change-Id: I2345bda7dfe29c5fe7f9550066b518cd6624d263
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Reviewed-on: http://git-master/r/116406
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: WK Tsai <wtsai@nvidia.com>
Reviewed-by: ChihMin Cheng <ccheng@nvidia.com>
Reviewed-by: Joy Wang <joyw@nvidia.com>
Reviewed-by: Vinayak Pane <vpane@nvidia.com>
Reviewed-by: Michael Hsu <mhsu@nvidia.com>
Reviewed-by: Krishna Reddy <vdumpa@nvidia.com>
|
|
CTS test fails if there are write permissions for user.
Hence reduce permissions for test_pattern.
bug 1001925
Change-Id: I769ff501671182965a8b699d7bbd580400ccd1c1
Signed-off-by: schowdary <schowdary@nvidia.com>
Reviewed-on: http://git-master/r/118871
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Tested-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Add master/slave configurability support interface for
all codecs. Currently, complete slave mode functionality
is added only for MAX98088 and WM8903 codec only. By
default, board parameters will set i2s master mode for
all codecs.
asoc: tegra: utils: add support for i2s master/slave mode.
Support for i2s in master or slave mode is made generic by
obtaining information from platform data.
Signed-off-by: Ankit Gupta <ankitgupta@nvidia.com>
Change-Id: Ided0fcefb6cdb124b78aab423bfd8c7dccd4bf6e
Reviewed-on: http://git-master/r/111553
(cherry picked from commit bb1ad7222f9c75424a45976d16de418bc927dc04)
asoc: tegra: wm8903 machine: add support for i2s in slave mode.
Add support for i2s as slave for playback and capture use cases.
Signed-off-by: Ankit Gupta <ankitgupta@nvidia.com>
Change-Id: I1f6b73a0a1b690ecd311b0ff4107aadbb1f037d8
Reviewed-on: http://git-master/r/111472
(cherry picked from commit 0434f8ba74adefe60597d95d30a455b9b2ece9b8)
asoc: tegra: wm8753 machine: add support for i2s in slave mode.
Add support for i2s as slave for playback and capture use cases.
Signed-off-by: Ankit Gupta <ankitgupta@nvidia.com>
Change-Id: Ib0596955cd0c6ac5ec57b0f3c6ecc9e4ed41268c
Reviewed-on: http://git-master/r/113208
(cherry picked from commit 0fc6b5e3a98d9f8866f73d7914b0c590334ce862)
asoc: tegra: aic326x machine: add support for i2s in slave mode.
Support for i2s in slave mode is added for playabck and capture
use cases.
Signed-off-by: Ankit Gupta <ankitgupta@nvidia.com>
Change-Id: I41f6459765f075703ad7f5f8dc9d4628dd853820
Reviewed-on: http://git-master/r/112874
(cherry picked from commit 9a89ede36a1dca6f53250444e819443fb6f28d09)
asoc: tegra: rt5640 machine: add support for i2s in slave mode.
Add support for i2s as slave for playback and capture use cases.
Signed-off-by: Ankit Gupta <ankitgupta@nvidia.com>
Change-Id: I850ec62149b8a8d244445b70658b632dbce06558
Reviewed-on: http://git-master/r/112878
(cherry picked from commit 1d51561c8edf47d8557a825450a48ee8743a185b)
asoc: tegra: max98088 machine: add support for codec i2s as slave.
Add support for codec i2s as slave during voice Call.
(Bug 998682)
Signed-off-by: Ankit Gupta <ankitgupta@nvidia.com>
Change-Id: I8fc54d367e9acd5417d270869cb5a9398b3b527f
Reviewed-on: http://git-master/r/110559
(cherry picked from commit 78a490867e131b1cc892094ddd844c2b892cafb6)
asoc: tegra: max98095 machine: add support for i2s in slave mode.
Add support for i2s as slave for playback and capture use cases.
Signed-off-by: Ankit Gupta <ankitgupta@nvidia.com>
Change-Id: I80944d403be94c55ad2ce31aea921d80ea7c088a
Reviewed-on: http://git-master/r/112875
Reviewed-on: http://git-master/r/118080
Reviewed-by: Scott Peterson <speterson@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Sumit Bhattacharya <sumitb@nvidia.com>
|
|
Add configurability support for i2s parameters accross all board.
ARM: tegra: board: add i2s params
Add configurability support for i2s parameters accross all board
files.
Signed-off-by: Ankit Gupta <ankitgupta@nvidia.com>
Change-Id: If58788b5126280b7e1dc8c66e9c96d0e71229b5e
Reviewed-on: http://git-master/r/111476
(cherry-picked from commit cac52867b0a0cad3b3c5bf46f08b0b94d0be2e02)
ARM: tegra: include: add configurability support for i2s params.
Add several variables for i2s configuration in platform data
structure.
Signed-off-by: Ankit Gupta <ankitgupta@nvidia.com>
Change-Id: Iea3930f308954471f170513234c2c02a8559ef98
Reviewed-on: http://git-master/r/111473
(cherry picked from commit 35e749770f6046fc82860f1152db2f5f579b9508)
Reviewed-on: http://git-master/r/118071
Reviewed-by: Sumit Bhattacharya <sumitb@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Scott Peterson <speterson@nvidia.com>
|
|
SW WAR implementation for h/w issue observed on all tegra platforms
Adding a dTD to a Primed Endpoint May Not Get Recognized
TD freeing will be delayed until next TD is completed
Bug 1002166
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Reviewed-on: http://git-master/r/109562
(cherry picked from commit 8603480606af20444ed91e3010a22cc02edacb78)
Change-Id: I875d06eb2db78a18858590645df631478f3201bb
Reviewed-on: http://git-master/r/116972
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Tested-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Reviewed-by: Venkat Moganty <vmoganty@nvidia.com>
|
|
Using printk before CPU online can make hang or kernel panic.
Bug 1017539
Bug 1019700
Signed-off-by: Jake Park <jakep@nvidia.com>
Reviewed-on: http://git-master/r/117924
(cherry picked from commit 9d7426fdc7e8c70079d37f529517932370355ac6)
Change-Id: Ib55ee06dcaf92af63f8d72ee74939c72dda4296c
Reviewed-on: http://git-master/r/118141
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Peter Boonstoppel <pboonstoppel@nvidia.com>
Reviewed-by: Diwakar Tundlam <dtundlam@nvidia.com>
Reviewed-by: Sang-Hun Lee <sanlee@nvidia.com>
Tested-by: Sang-Hun Lee <sanlee@nvidia.com>
|
|
During early suspend, LCD_RESET output needs to be
turned low. 3mW power savings during display Off and
1mW on lp0.
Bug 969716
Bug 990845
Change-Id: Ia773f0411452fad3eddccb5f293d7f32c4a46a56
signed-off-by: Karthik Ramakrishnan <karthikr@nvidia.com>
(cherry picked from commit 87322ed7e125ae1ac8d05b623c66f6ab7ea40881)
Reviewed-on: http://git-master/r/114057
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
The notifiers now properly fire on every cluster switch
Change-Id: I381301cf62f25b49532326cc7759696c7f6797b7
Signed-off-by: Sai Charan Gurrappadi <sgurrappadi@nvidia.com>
Reviewed-on: http://git-master/r/118376
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Diwakar Tundlam <dtundlam@nvidia.com>
|
|
There is race between acm_suspend and acm_read_bulk_callback. Host may
receive bulk transfer right before suspend. The packet will be discarded
if this urb is killed in acm_suspend. This patch checks the actual length
of urb and processes it in this case.
Bug 996268
Signed-off-by: Steve Lin <stlin@nvidia.com>
Change-Id: Ief2b42708160b67903f976ec60da825d46c4720b
Reviewed-on: http://git-master/r/117135
(cherry picked from commit af3e96c987fbae8a135d1ff18872b9c32e09b67f)
Reviewed-on: http://git-master/r/118105
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Steve Lin <stlin@nvidia.com>
Reviewed-by: Steve Lin <stlin@nvidia.com>
|
|
Power improvement for OS IDLE DISPLAY OFF, audio use cases.
Governor is changed to conservative governor when panel is
suspended. Default governor (interactive governor) is restored
when the panel resumes (when user presses the power button).
Seeing a power improvement of 22mW (42mW/64mW) for os idle
display off and 30mW (57mW/87mW) for audio playback use cases
Bug 1002294
Signed-off-by: Prem Sasidharan <psasidharan@nvidia.com>
Change-Id: I06d2bca654bc8ff96fdf18d81a98c6e4ec838235
(cherry picked from commit 7002c3fe264163b6be38cf9e24bdf137f44ed69f)
Reviewed-on: http://git-master/r/118196
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Tested-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
This is a copy of p1852 defconfig with usb support disabled
Bug 989824
Change-Id: I40089049a35c18782b2e211b63d20fafe8fb9ee8
Reviewed-on: http://git-master/r/114138
Tested-by: Sanjay Sancheti <sasancheti@nvidia.com>
Reviewed-by: Amlan Kundu <akundu@nvidia.com>
Reviewed-by: Varun Wadekar <vwadekar@nvidia.com>
(cherry picked from commit a147ad51d486d4aea9a73a11d4c14a13ad2121bb)
Reviewed-on: http://git-master/r/118011
Reviewed-by: Automatic_Commit_Validation_User
|
|
1. Initialize PCIe on every resume whether device
is dock/undocked.
2. Poweroff PCIe if Poweron failed at any stage.
3. Make PCIe initialization robust so that it is
successful anytime dock is connected i.e while
in LP0 or after it's exit or else.
Bug 1020949
Change-Id: I79cd75f2bf7164a9b5c8906a370364dba5183ac8
Signed-off-by: Jay Agarwal <jagarwal@nvidia.com>
Reviewed-on: http://git-master/r/117532
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
This CL handles the following:
1. Prevents setting of wrong date in tps6591x_rtc_set_time().
For example the following case was not handled in rtc driver:
if hwclock command wanted to set 31/Dec/1999 then our RTC driver was
setting the date to 31/Dec/2099 and later on when hwclock read the
date back it was getting a invalid date.
Also, the hwclock command can only handle date upto the year 2038.
2. Sets STOP_RTC bit to one when the driver is initialized
Bug 1012914
Bug 1017647
Signed-off-by: Preetham Chandru R <pchandru@nvidia.com>
Change-Id: If8abfebe3ee6da05498deb38d7247ab265729c0c
Reviewed-on: http://git-master/r/117298
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Reviewed-by: Kiran Adduri <kadduri@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
|
|
-enable warnings as errors compilation flag
bug 949219
Change-Id: I47e2df835985f341ebccdad95f53b4e6f7763e39
Signed-off-by: schowdary <schowdary@nvidia.com>
Reviewed-on: http://git-master/r/118017
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
|
|
Flash version modem need to do reset with gpio
and start enumeration on falling edge of ap wake.
Remove unused variable enum_delay_ms.
Bug 1003141
Change-Id: Ie43c693c3fead5c89b30c1b97cf1f3e4c05e5588
Signed-off-by: Vinayak Pane <vpane@nvidia.com>
Reviewed-on: http://git-master/r/116886
Reviewed-by: Michael Hsu <mhsu@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Ken Chang <kenc@nvidia.com>
Tested-by: Ken Chang <kenc@nvidia.com>
Reviewed-by: Steve Lin <stlin@nvidia.com>
|
|
Fixed bug using Tj temp to update thermal zone,
It should use EDP temp to update it.
bug 1007726
Change-Id: Ibcf2520a4bad7dc977add0b5c855681d2667a7c2
Signed-off-by: Daniel Fu <danifu@nvidia.com>
Reviewed-on: http://git-master/r/117250
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Joshua Primero <jprimero@nvidia.com>
Tested-by: Joshua Primero <jprimero@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
|