summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-04-19[media] media: vb2: correct queue initialization orderMarek Szyprowski
q->memory entry is initialized to late, so if allocation of memory buffers fails, the buffers might not be freed correctly (q->memory is tested in __vb2_free_mem, which can be called before setting q->memory). Reported-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] media: vb2: fix incorrect v4l2_buffer->flags handlingMarek Szyprowski
Videobuf2 core assumes that driver doesn't set any buffer flags. This is correct for buffer state flags that videobuf2 manages, but the other flags like V4L2_BUF_FLAG_{KEY,P,B}FRAME, V4L2_BUF_FLAG_TIMECODE and V4L2_BUF_FLAG_INPUT should be passed from or to the driver. Reported-by: Jonghun Han <jonghun.han@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] s5p-fimc: Add support for the buffer timestamps and sequenceSylwester Nawrocki
Add support for buffer timestamps and the sequence number in the video capture driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] s5p-fimc: Fix bytesperline and plane payload setupSylwester Nawrocki
Make sure the sizeimage for 3-planar color formats is width * height * 3/2 and the bytesperline is same for each plane in case of a multi-planar format. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] s5p-fimc: Do not allow changing format after REQBUFSSylwester Nawrocki
Protecting the color format with vb2_is_streaming() is not sufficient as this prevents changing the format only after VIDIOC_STREAMON. To prevent the color format reconfiguration as soon as buffers are allocated use vb2_is_busy() instead. Also make the videobuf queue ops structure static. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] s5p-fimc: Fix FIMC3 pixel limits on Exynos4Sylwester Nawrocki
Correct pixel limits for the fourth FIMC entity on Exynos4 SoCs. FIMC3 only supports the writeback input from the LCD mixer. Also rename s5pv310 variant to exynos4 which is needed after renaming s5pv310 series to Exynos4. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] tda18271: update tda18271c2_rf_cal as per NXP's rev.04 datasheetMichael Krufky
Cc: Stefan Sibiga <stefansibiga@yahoo.ca> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] tda18271: update tda18271_rf_band as per NXP's rev.04 datasheetMichael Krufky
Cc: Stefan Sibiga <stefansibiga@yahoo.ca> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] tda18271: fix bad calculation of main post divider byteMichael Krufky
R_MPD bit 3 does not depend on analog vs. digital. Just use (0x7f & pd) directly from the values in the main pll table. Thanks to Stefan Sibiga for pointing this out. Cc: Stefan Sibiga <stefansibiga@yahoo.ca> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] tda18271: prog_cal and prog_tab variables should be s32, not u8Michael Krufky
Fix type of prog_cal and prog_tab variables to avoid any possible calculation errors. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] tda18271: fix calculation bug in tda18271_rf_tracking_filters_initMichael Krufky
Misplaced parenthesis cause a calculation bug in tda18271_rf_tracking_filters_init Thanks to Stefan Sibiga for pointing this out. Cc: Stefan Sibiga <stefansibiga@yahoo.ca> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] omap3isp: queue: Don't corrupt buf->npages when get_user_pages() failsLaurent Pinchart
get_user_pages() can return a negative error code when it fails. Set buf->npages to 0 in that case, to prevent isp_video_buffer_cleanup() from releasing invalid pages. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] v4l: Don't register media entities for subdev device nodesLaurent Pinchart
Subdevs already have their own entity, don't register as second one when registering the subdev device node. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] omap3isp: Don't increment node entity use count when poweron failsLaurent Pinchart
When open a device node, all entities part of the same pipeline are powered on. If one of the entities fails to be powered on, the open operations fails. In that case the device node entity use count must not be incremented. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] omap3isp: lane shifter supportMichael Jones
To use the lane shifter, set different pixel formats at each end of the link at the CCDC input. Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] omap3isp: ccdc: support Y10/12, 8-bit bayer fmtsMichael Jones
Add support for 8-bit bayer and 10- and 12-bit grey formats at the CCDC input. Y12 is truncated to Y10 at the CCDC output. Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] media: add missing 8-bit bayer formats and Y12Michael Jones
8-bit SGBRG and SRGGB media bus formats are missing, as well as the 12-bit grey format. Add them. Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-19[media] v4l: add V4L2_PIX_FMT_Y12 formatMichael Jones
Y12 is a grey-scale format with a depth of 12 bits per pixel stored in 16-bit words. Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-17cx23885: Fix stv0367 Kconfig dependencyMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-17[media] omap3isp: Use isp xclk definesStanimir Varbanov
Use isp defines for isp xclk selection in isp_set_xclk(). Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-17[media] omap3isp: isp: Reset the ISP when the pipeline can't be stoppedLaurent Pinchart
When a failure to stop a module in the pipeline is detected, the only way to recover is to reset the ISP. However, as other users can be using a different pipeline with other modules, the ISP can't be reset synchronously with the error detection. Mark the ISP as needing a reset when a failure to stop a pipeline is detected, and reset the ISP when the last user releases the last reference to the ISP. Modify the omap3isp_pipeline_set_stream() function to record the new ISP pipeline state only when no error occurs, except when stopping the pipeline in which case the pipeline is still marked as stopped. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-17[media] omap3isp: stat: update struct ispstat_generic_config's commentsDavid Cohen
struct ispstat_generic_config's comments refers to isph3a_aewb_config, isph3a_af_config and isphist_config. But those structs have had their names prefixed with 'omap3'. So, let's update the comments. Signed-off-by: David Cohen <david.cohen@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-17[media] media: Properly handle link flags in link setup, link notify callbackLaurent Pinchart
The link flags were not properly handled in __media_entity_setup_link which could lead to link_notify callback to be called when the flags are not modified. Fix this. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-17[media] omap3isp: Fix trivial typosMichael Jones
It doesn't get more trivial than these. Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-17[media] omap3isp: resizer: Improved resizer rsz factor formulaSakari Ailus
Round properly the rsz factor so that we get highest rsz so that the input width (or height) is highest possible smaller or equal to what the user asks. Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-17[media] omap3isp: resizer: Use 4-tap mode equations when the ratio is <= 512Laurent Pinchart
As the number of phases/taps, used to select the correct equations to compute the ratio, depends on the ratio, start with the 7-tap mode equations to compute an approximation of the ratio, and switch to the 4-tap mode equations if the approximation is lower than or equal to 512. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] omap3isp: resizer: Center the crop rectangleLaurent Pinchart
When the crop rectangle needs to be modified to match hardware requirements, center the resulting rectangle on the requested rectangle instead of removing pixels from the right and bottom sides only. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] media: Use correct ioctl name in MEDIA_IOC_SETUP_LINK documentationLaurent Pinchart
The documentation incorrectly refers to MEDIA_IOC_ENUM_LINKS, fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] V4L: mx3_camera: select VIDEOBUF2_DMA_CONTIG instead of ↵Uwe Kleine-König
VIDEOBUF_DMA_CONTIG Since commit 379fa5d ([media] V4L: mx3_camera: convert to videobuf2) mx3_camera uses videobuf2, but that commit didn't upgrade the select resulting in the following build failure: drivers/built-in.o: In function `mx3_camera_init_videobuf': clkdev.c:(.text+0x86580): undefined reference to `vb2_dma_contig_memops' drivers/built-in.o: In function `mx3_camera_probe': clkdev.c:(.devinit.text+0x3548): undefined reference to `vb2_dma_contig_init_ctx' clkdev.c:(.devinit.text+0x3578): undefined reference to `vb2_dma_contig_cleanup_ctx' drivers/built-in.o: In function `mx3_camera_remove': clkdev.c:(.devexit.text+0x674): undefined reference to `vb2_dma_contig_cleanup_ctx' make[2]: *** [.tmp_vmlinux1] Error 1 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] V4L: sh_mobile_ceu_camera: fix typos in documentationGuennadi Liakhovetski
Fix a couple of typos and clarify a formula in sh_mobile_ceu driver documentation. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] sh_mobile_csi2: fix module reloadingGuennadi Liakhovetski
If the camera host driver (sh_mobile_ceu_camera.c) is unloaded and then reloaded, probe will fail, because camera client .set_bus_param() and .query_bus_param() methods have been set to NULL. Fix this by caching the original pointers and restoring them on driver-unbind. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] soc-camera: don't dereference I2C client after it has been removedGuennadi Liakhovetski
i2c_unregister_device() frees the I2C client, so, dereferencing it afterwards is a bug, that leads to Oopses. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] imx074: return a meaningful error code instead of -1Guennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] soc-camera: fix a recent multi-camera breakage on sh-mobileGuennadi Liakhovetski
With the introduction of CSI2 support on sh-mobile, the host driver switched to using v4l2_device_call_until_err() with grp_id == 0 to call subdev operations on the sensor and the CSI2 subdev. However, this has broken multi-client set ups like the one on migor, because that way all operations get called on both clients. To fix this add a grp_id and set it to the client private context. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] v4l2-device: fix a macro definitionGuennadi Liakhovetski
v4l2_device_unregister_subdev() wrongly uses "arg..." instead of "## arg" in its body. Fix it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] videobuf2: fix an error messageGuennadi Liakhovetski
buf->size is not yet initialised in videobuf2-dma-contig at the time of the error message, use "size." Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] videobuf2: fix core to correctly identify allocation failuresGuennadi Liakhovetski
The videobuf2-dma-contig allocator returns an ERR_PTR() on failure, not a NULL like all other allocators. Fix videobuf2-core to also correctly recognise those failures. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] cx18: Fix list BUG for IDX stream, triggerable in cx18_probe() error ↵Andy Walls
clean up, If allocating stream buffers for one of the primary streams (e.g. YUV) failed during card probe, the error path clean up would try to manipulate the yet unitialized IDX stream structures. This caused a BUG due to unitialized list heads. Detect that case and ignore the uninitialized IDX stream. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-04[media] Fix dependencies for Technisat USB2.0 DVB-S/S2Patrick Boettcher
Device is based on STV0903 demod and STV6110x tuner Signed-off-by: Oleg Roitburd <oroitburd@gmail.com> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-04[media] dib0700: fix possible NULL pointer dereferencePatrick Boettcher
Seems like 'adap->fe' test for NULL was meant to be before we dereference that pointer. Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-04[media] FLEXCOP-PCI: fix __xlate_proc_name-warning for flexcop-pciPatrick Boettcher
This patch fixes the warning about bad names for sys-fs and other kernel-things. The flexcop-pci driver was using '/'-characters in it, which is not good. This has been fixed in several attempts by several people, but obviously never made it into the kernel. Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Cc: Steffen Barszus <steffenbpunkt@googlemail.com> Cc: Boris Cuber <me@boris64.net> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-04[media] DIB0700: fix typo in dib0700_devices.cPatrick Boettcher
Fix typo introduced in b4d6046e841955be9cc49164b03b91c9524f9c2e. Spotted by Dr. David Alan Gilbert. Thanks for that. Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Cc: Dr. David Alan Gilbert <linux@treblig.org> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-04Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] radio: wl128x: Update registration process with ST [media] staging: altera-jtag needs delay.h
2011-04-04Merge branch 'unicore32' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32 * 'unicore32' of git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32: unicore32 framebuffer fix: get videomemory by __get_free_pages() and make it floatable unicore32 core architecture: remove duplicated #include unicore32 rtc driver fix: cleanup irq_set_freq and irq_set_state unicore32 fix: remove arch-specific futex support unicore32 ldscript fix: add cacheline parameter to PERCPU() macro
2011-04-04Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: twl4030-madc-hwmon: add "platform:" prefix for platform modalias
2011-04-04ntp: fix non privileged system time shiftingRichard Cochran
The ADJ_SETOFFSET bit added in commit 094aa188 ("ntp: Add ADJ_SETOFFSET mode bit") also introduced a way for any user to change the system time. Sneaky or buggy calls to adjtimex() could set ADJ_OFFSET_SS_READ | ADJ_SETOFFSET which would result in a successful call to timekeeping_inject_offset(). This patch fixes the issue by adding the capability check. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04rtc-mrst: Fix section typesMajor Lee
Fix the following section mismatch warning. WARNING: drivers/rtc/built-in.o(.data+0xa0): Section mismatch in reference from the variable vrtc_mrst_platform_driver to the function .init.text:vrtc_mrst_platform_probe() The variable vrtc_mrst_platform_driver references the function __init vrtc_mrst_platform_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Major Lee <major_lee@wistron.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-02unicore32 framebuffer fix: get videomemory by __get_free_pages() and make it ↵Guan Xuetao
floatable 1. get videomemory by __get_free_pages() in fb-puv3.c 2. remove resource reservation for old fixed UNIGFX_MMAP & UVC_MMAP space 3. remove unused macros: PKUNTIY_UNIGFX_MMAP_BASE, PKUNITY_UNIGFX_MMAP_SIZE, PKUNITY_UVC_MMAP_BASE, PKUNITY_UVC_MMAP_SIZE and KUSER_UNIGFX_BASE 4. remove unused header linux/vmalloc.h in fb-puv3.h Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-04-02unicore32 core architecture: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in arch/unicore32/kernel/traps.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2011-04-02unicore32 rtc driver fix: cleanup irq_set_freq and irq_set_stateGuan Xuetao
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-06 13:42:04 +0000