summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-05-31drivers:usb:fsl: Fix compilation error for fsl ehci drvRamneek Mehresh
Fix compilation error in fsl ehci drv because ehci_reset() and ehci_adjust_port_wakeup_flags() were not exported, and are used when PM is enabled Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-31usb: renesas_usbhs: Don't disable the pipe if Control write status stageYoshihiro Shimoda
This patch fixes an issue that sometimes this controller is not able to complete the Control write status stage. This driver should enable DCPCTR.CCPL and PID_BUF to complete the status stage. However, if this driver detects the ctrl_stage interruption first before the control write data is received, this driver will clear the PID_BUF wrongly in the usbhsf_pio_try_pop(). To avoid this issue, this patch doesn't clear the PID_BUF in the usbhsf_pio_try_pop(). (Since also the privious code doesn't disable the PID_BUF after a control transfer was finished, this patch doesn't have any side efforts.) Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-31usb: renesas_usbhs: Fix fifo unclear in usbhsf_prepare_popKazuya Mizuguchi
This patch fixes an issue for control write. When usbhsf_prepare_pop() is called after this driver called a gadget setup function, this controller doesn't receive the control write data. So, this patch adds a code to clear the fifo for control write in usbhsf_prepare_pop(). Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-31drivers:usb:fsl: Add support for USB controller version-2.5Nikhil Badola
Add support for USB controller version-2.5 used in T4240 rev2.0, T1024, T1040, T2080, LS1021A Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-31drivers:usb:fsl: Check IP version 2.4 for mph USB controllerNikhil Badola
Check IP version 2.4 for multi port host USB controller and return FSL_USB_VER_2_4 macro Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-31usb: core: Fix USB 3.0 devices lost in NOTATTACHED state after a hub port resetRobert Schlabbach
Fix USB 3.0 devices lost in NOTATTACHED state after a hub port reset. Dissolve the function hub_port_finish_reset() completely and divide the actions to be taken into those which need to be done after each reset attempt and those which need to be done after the full procedure is complete, and place them in the appropriate places in hub_port_reset(). Also, remove an unneeded forward declaration of hub_port_reset(). Verbose Problem Description: USB 3.0 devices may be "lost for good" during a hub port reset. This makes Linux unable to boot from USB 3.0 devices in certain constellations of host controllers and devices, because the USB device is lost during initialization, preventing the rootfs from being mounted. The underlying problem is that in the affected constellations, during the processing inside hub_port_reset(), the hub link state goes from 0 to SS.inactive after the initial reset, and back to 0 again only after the following "warm" reset. However, hub_port_finish_reset() is called after each reset attempt and sets the state the connected USB device based on the "preliminary" status of the hot reset to USB_STATE_NOTATTACHED due to SS.inactive, yet when the following warm reset is complete and hub_port_finish_reset() is called again, its call to set the device to USB_STATE_DEFAULT is blocked by usb_set_device_state() which does not allow taking USB devices out of USB_STATE_NOTATTACHED state. Thanks to Alan Stern for guiding me to the proper solution and how to submit it. Link: http://lkml.kernel.org/r/trinity-25981484-72a9-4d46-bf17-9c1cf9301a31-1432073240136%20()%203capp-gmx-bs27 Signed-off-by: Robert Schlabbach <robert_s@gmx.net> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-31USB: hcd.h : Removed an unnecessary function prototype ↵Abhishek Bist
usb_find_interface_driver() This function is used to call in early version of linux kernel in order to find out the interface used by a usb device. But now it's use is completely abolished. So,it would be relevant to remove this obselete function from kernel mainline. Signed-off-by: Abhishek Bist <ishubist@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-31usb: host: xhci: remove incorrect comment about mutexChris Bainbridge
The comment stating that xhci_setup_device() is protected by the address mutex is not true since commit 6fecd4f2a58c ("USB: separate usb_address0 mutexes for each bus") as xhci handles two buses. Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-31xhci: Return correct number of tranferred bytes for stalled control endpointsMathias Nyman
Fix the xhci driver from bluntly setting the transferred length to 0 if we get a STALL on anything else than the data stage of a control transfer. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-31xhci: optimize xhci bus resume timeMathias Nyman
We used to write the root port state changes in turn for every port, sleeping 20ms after every port state change. Suspended usb2 ports need two state changes, taking minimun 40ms per port. Now instead poll the Port Link State Change (PLC) bit as the state change to U0 will set this bit. Suspended usb2 ports still need the extra 20ms delay, but we now change all the port states at once so we only need to sleep 20ms once all together Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-31usb: xhci: Fix suspend/resume when used with OTG coreRoger Quadros
In the OTG case, the controller might not yet have been added or is removed before the system suspends. Assign xhci->main_hcd during probe to prevent NULL pointer de-reference in xhci_suspend/resume(). Use the hcd->state flag to check if HCD is halted and if that is so do nothing for xhci_suspend/resume(). [Only for xhci-plat devices, pci devices need it in gen_setup -Mathias] Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-31usb: xhci: fix xhci locking up during hcd removeRoger Quadros
The problem seems to be that if a new device is detected while we have already removed the shared HCD, then many of the xhci operations (e.g. xhci_alloc_dev(), xhci_setup_device()) hang as command never completes. I don't think XHCI can operate without the shared HCD as we've already called xhci_halt() in xhci_only_stop_hcd() when shared HCD goes away. We need to prevent new commands from being queued not only when HCD is dying but also when HCD is halted. The following lockup was detected while testing the otg state machine. [ 178.199951] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 178.205799] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 178.214458] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 178.223619] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 178.230677] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 178.237796] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 178.245358] usb usb1: Product: xHCI Host Controller [ 178.250483] usb usb1: Manufacturer: Linux 4.0.0-rc1-00024-g6111320 xhci-hcd [ 178.257783] usb usb1: SerialNumber: xhci-hcd.0.auto [ 178.267014] hub 1-0:1.0: USB hub found [ 178.272108] hub 1-0:1.0: 1 port detected [ 178.278371] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 178.284171] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 178.294038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 178.301183] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 178.308776] usb usb2: Product: xHCI Host Controller [ 178.313902] usb usb2: Manufacturer: Linux 4.0.0-rc1-00024-g6111320 xhci-hcd [ 178.321222] usb usb2: SerialNumber: xhci-hcd.0.auto [ 178.329061] hub 2-0:1.0: USB hub found [ 178.333126] hub 2-0:1.0: 1 port detected [ 178.567585] dwc3 48890000.usb: usb_otg_start_host 0 [ 178.572707] xhci-hcd xhci-hcd.0.auto: remove, state 4 [ 178.578064] usb usb2: USB disconnect, device number 1 [ 178.586565] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 178.592585] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 178.597924] usb usb1: USB disconnect, device number 1 [ 178.603248] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 190.597337] INFO: task kworker/u4:0:6 blocked for more than 10 seconds. [ 190.604273] Not tainted 4.0.0-rc1-00024-g6111320 #1058 [ 190.610228] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 190.618443] kworker/u4:0 D c05c0ac0 0 6 2 0x00000000 [ 190.625120] Workqueue: usb_otg usb_otg_work [ 190.629533] [<c05c0ac0>] (__schedule) from [<c05c10ac>] (schedule+0x34/0x98) [ 190.636915] [<c05c10ac>] (schedule) from [<c05c1318>] (schedule_preempt_disabled+0xc/0x10) [ 190.645591] [<c05c1318>] (schedule_preempt_disabled) from [<c05c23d0>] (mutex_lock_nested+0x1ac/0x3fc) [ 190.655353] [<c05c23d0>] (mutex_lock_nested) from [<c046cf8c>] (usb_disconnect+0x3c/0x208) [ 190.664043] [<c046cf8c>] (usb_disconnect) from [<c0470cf0>] (_usb_remove_hcd+0x98/0x1d8) [ 190.672535] [<c0470cf0>] (_usb_remove_hcd) from [<c0485da8>] (usb_otg_start_host+0x50/0xf4) [ 190.681299] [<c0485da8>] (usb_otg_start_host) from [<c04849a4>] (otg_set_protocol+0x5c/0xd0) [ 190.690153] [<c04849a4>] (otg_set_protocol) from [<c0484b88>] (otg_set_state+0x170/0xbfc) [ 190.698735] [<c0484b88>] (otg_set_state) from [<c0485740>] (otg_statemachine+0x12c/0x470) [ 190.707326] [<c0485740>] (otg_statemachine) from [<c0053c84>] (process_one_work+0x1b4/0x4a0) [ 190.716162] [<c0053c84>] (process_one_work) from [<c00540f8>] (worker_thread+0x154/0x44c) [ 190.724742] [<c00540f8>] (worker_thread) from [<c0058f88>] (kthread+0xd4/0xf0) [ 190.732328] [<c0058f88>] (kthread) from [<c000e810>] (ret_from_fork+0x14/0x24) [ 190.739898] 5 locks held by kworker/u4:0/6: [ 190.744274] #0: ("%s""usb_otg"){.+.+.+}, at: [<c0053bf4>] process_one_work+0x124/0x4a0 [ 190.752799] #1: ((&otgd->work)){+.+.+.}, at: [<c0053bf4>] process_one_work+0x124/0x4a0 [ 190.761326] #2: (&otgd->fsm.lock){+.+.+.}, at: [<c048562c>] otg_statemachine+0x18/0x470 [ 190.769934] #3: (usb_bus_list_lock){+.+.+.}, at: [<c0470ce8>] _usb_remove_hcd+0x90/0x1d8 [ 190.778635] #4: (&dev->mutex){......}, at: [<c046cf8c>] usb_disconnect+0x3c/0x208 [ 190.786700] INFO: task kworker/1:0:14 blocked for more than 10 seconds. [ 190.793633] Not tainted 4.0.0-rc1-00024-g6111320 #1058 [ 190.799567] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 190.807783] kworker/1:0 D c05c0ac0 0 14 2 0x00000000 [ 190.814457] Workqueue: usb_hub_wq hub_event [ 190.818866] [<c05c0ac0>] (__schedule) from [<c05c10ac>] (schedule+0x34/0x98) [ 190.826252] [<c05c10ac>] (schedule) from [<c05c4e40>] (schedule_timeout+0x13c/0x1ec) [ 190.834377] [<c05c4e40>] (schedule_timeout) from [<c05c19f0>] (wait_for_common+0xbc/0x150) [ 190.843062] [<c05c19f0>] (wait_for_common) from [<bf068a3c>] (xhci_setup_device+0x164/0x5cc [xhci_hcd]) [ 190.852986] [<bf068a3c>] (xhci_setup_device [xhci_hcd]) from [<c046b7f4>] (hub_port_init+0x3f4/0xb10) [ 190.862667] [<c046b7f4>] (hub_port_init) from [<c046eb64>] (hub_event+0x704/0x1018) [ 190.870704] [<c046eb64>] (hub_event) from [<c0053c84>] (process_one_work+0x1b4/0x4a0) [ 190.878919] [<c0053c84>] (process_one_work) from [<c00540f8>] (worker_thread+0x154/0x44c) [ 190.887503] [<c00540f8>] (worker_thread) from [<c0058f88>] (kthread+0xd4/0xf0) [ 190.895076] [<c0058f88>] (kthread) from [<c000e810>] (ret_from_fork+0x14/0x24) [ 190.902650] 5 locks held by kworker/1:0/14: [ 190.907023] #0: ("usb_hub_wq"){.+.+.+}, at: [<c0053bf4>] process_one_work+0x124/0x4a0 [ 190.915454] #1: ((&hub->events)){+.+.+.}, at: [<c0053bf4>] process_one_work+0x124/0x4a0 [ 190.924070] #2: (&dev->mutex){......}, at: [<c046e490>] hub_event+0x30/0x1018 [ 190.931768] #3: (&port_dev->status_lock){+.+.+.}, at: [<c046eb50>] hub_event+0x6f0/0x1018 [ 190.940558] #4: (&bus->usb_address0_mutex){+.+.+.}, at: [<c046b458>] hub_port_init+0x58/0xb10 Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-31usb: xhci: Allow usb_add/remove_hcd() to be called repeatedlyRoger Quadros
Don't set xhci->shared_hcd to NULL in xhci_stop() as we have still not de-allocated it. It was resulting in a NULL pointer de-reference if usb_add/remove_hcd() is called repeatedly. We want repeated add/remove to work for the OTG use case. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-31usb: xhci: plat: Create both HCDs before adding themRoger Quadros
As xhci_hcd is now allocated by usb_create_hcd(), we don't need to add the primary HCD before creating the shared HCD. Creating the shared HCD before adding the primary HCD is particularly useful for the OTG use case so that we know at the OTG core if the HCD is in single configuration or dual (primary + shared) configuration. Signed-off-by: Roger Quadros <rogerq@ti.com> [Mathias: rearranged to fit on top of the Marvell Armada 385 phy changes] Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-31usb: xhci: cleanup xhci_hcd allocationRoger Quadros
HCD core allocates memory for HCD private data in usb_create_[shared_]hcd() so make use of that mechanism to allocate the struct xhci_hcd. Introduce struct xhci_driver_overrides to provide the size of HCD private data and hc_driver operation overrides. As of now we only need to override the reset and start methods. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24cdc-acm: use swap() in acm_probe()Fabian Frederick
Use kernel.h macro definition. Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24USB: cdc-acm: add support for up to 256 devicesJohan Hovold
Increase the minor range to enable support for up to 256 devices. Some people are hitting the current 32 device limit. Hopefully 256 minors will be enough for while still. Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24USB: cdc-acm: use idr to manage minor numbersJohan Hovold
Use the idr-interface rather than a static table to manage minor-number allocations. This allows us to easily switch over to fully dynamic minor allocations when the TTY-layer can handle that. Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24USB: devio: fix a condition in async_completed()Dan Carpenter
Static checkers complain that the current condition is never true. It seems pretty likely that it's a typo and "URB" was intended instead of "USB". Fixes: 3d97ff63f899 ('usbdevfs: Use scatter-gather lists for large bulk transfers') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24USB: ehci-platform: support EHCIs with transaction translatorJoachim Eastwood
Some EHCI controllers have a Transaction Translator built into the root hub. Support this feature in device tree when using the ehci-platform driver by adding a feature flag for it. This is needed to get USB working on NXP LPC18xx/43xx platforms. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24drivers:usb:fsl:Make fsl ehci drv an independent driver moduleRamneek Mehresh
Make Freescale EHCI driver an independent entity from ehci-hcd.c. This involves - using module_init/module_exit functions - using overrides structure - some necessary code cleanup Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-18Merge 4.1-rc4 into usb-nextGreg Kroah-Hartman
We want the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-18Linux 4.1-rc4v4.1-rc4Linus Torvalds
2015-05-18watchdog: Fix merge 'conflict'Peter Zijlstra
Two watchdog changes that came through different trees had a non conflicting conflict, that is, one changed the semantics of a variable but no actual code conflict happened. So the merge appeared fine, but the resulting code did not behave as expected. Commit 195daf665a62 ("watchdog: enable the new user interface of the watchdog mechanism") changes the semantics of watchdog_user_enabled, which thereafter is only used by the functions introduced by b3738d293233 ("watchdog: Add watchdog enable/disable all functions"). There further appears to be a distinct lack of serialization between setting and using watchdog_enabled, so perhaps we should wrap the {en,dis}able_all() things in watchdog_proc_mutex. This patch fixes a s2r failure reported by Michal; which I cannot readily explain. But this does make the code internally consistent again. Reported-and-tested-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-18Merge tag 'for-linus-20150516' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD fixes from Brian Norris: "Two MTD fixes for 4.1: - readtest: the signal-handling code was clobbering the error codes we should be handling/reporting in this test, rendering it useless. Noticed by Coverity. - the common SPI NOR flash DT binding (merged for 4.1-rc1) is being revised, so let's change that before 4.1 is minted" * tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd: Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor" mtd: readtest: don't clobber error reports
2015-05-16Merge tag 'usb-4.1-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB fixes and new device ids for 4.1-rc4. All are pretty minor, and have been in linux-next successfully" * tag 'usb-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb-storage: Add NO_WP_DETECT quirk for Lacie 059f:0651 devices Added another USB product ID for ELAN touchscreen quirks. xhci: gracefully handle xhci_irq dead device xhci: Solve full event ring by increasing TRBS_PER_SEGMENT to 256 xhci: fix isoc endpoint dequeue from advancing too far on transaction error usb: chipidea: debug: avoid out of bound read USB: visor: Match I330 phone more precisely USB: pl2303: Remove support for Samsung I330 USB: cp210x: add ID for KCF Technologies PRN device usb: gadget: remove incorrect __init/__exit annotations usb: phy: isp1301: work around tps65010 dependency usb: gadget: serial: fix re-ordering of tx data usb: gadget: hid: Fix static variable usage usb: gadget: configfs: Fix interfaces array NULL-termination usb: gadget: xilinx: fix devm_ioremap_resource() check usb: dwc3: dwc3-omap: correct the register macros
2015-05-16Merge tag 'tty-4.1-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here's some TTY and serial driver fixes for reported issues. All of these have been in linux-next successfully" * tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: pty: Fix input race when closing tty/n_gsm.c: fix a memory leak when gsmtty is removed Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open" serial: omap: Fix error handling in probe earlycon: Revert log warnings
2015-05-16Merge tag 'staging-4.1-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver fixes from Greg KH: "Here's some staging and iio driver fixes to resolve a number of reported issues. All of these have been in linux-next for a while" * tag 'staging-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (31 commits) iio: light: hid-sensor-prox: Fix memory leak in probe() iio: adc: cc10001: Add delay before setting START bit iio: adc: cc10001: Fix regulator_get_voltage() return value check iio: adc: cc10001: Fix incorrect use of power-up/power-down register staging: gdm724x: Correction of variable usage after applying ALIGN() iio: adc: cc10001: Fix the channel number mapping staging: vt6655: lock MACvWriteBSSIDAddress. staging: vt6655: CARDbUpdateTSF bss timestamp correct tsf counter value. staging: vt6655: vnt_tx_packet Correct TX order of OWNED_BY_NIC staging: vt6655: Fix 80211 control and management status reporting. staging: vt6655: implement IEEE80211_TX_STAT_NOACK_TRANSMITTED staging: vt6655: device_free_tx_buf use only ieee80211_tx_status_irqsafe staging: vt6656: use ieee80211_tx_info to select packet type. staging: rtl8712: freeing an ERR_PTR staging: sm750: remove incorrect __exit annotation iio: kfifo: Set update_needed to false only if a buffer was allocated iio: mcp320x: Fix occasional incorrect readings iio: accel: mma9553: check input value for activity period iio: accel: mma9553: add enable channel for activity iio: accel: mma9551_core: prevent buffer overrun ...
2015-05-16Merge tag 'char-misc-4.1-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg KH: "Here is one fix, in the extcon subsystem, that resolves a reported issue. It's been in linux-next for a number of weeks now, sorry for not getting it to you sooner" * tag 'char-misc-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: extcon: usb-gpio: register extcon device before IRQ registration
2015-05-16Merge branch 'for-linus-4.1-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML hostfs fix from Richard Weinberger: "This contains a single fix for a regression introduced in 4.1-rc1" * 'for-linus-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: hostfs: Use correct mask for file mode
2015-05-16Merge tag 'upstream-4.1-rc4' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBI bufix from Richard Weinberger: "This contains a single bug fix for the UBI block driver" * tag 'upstream-4.1-rc4' of git://git.infradead.org/linux-ubifs: UBI: block: Add missing cache flushes
2015-05-16Merge tag 'for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Fix a number of ext4 bugs; the most serious of which is a bug in the lazytime mount optimization code where we could end up updating the timestamps to the wrong inode" * tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix an ext3 collapse range regression in xfstests jbd2: fix r_count overflows leading to buffer overflow in journal recovery ext4: check for zero length extent explicitly ext4: fix NULL pointer dereference when journal restart fails ext4: remove unused function prototype from ext4.h ext4: don't save the error information if the block device is read-only ext4: fix lazytime optimization
2015-05-16Merge branch 'for-linus-4.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "The first commit is a fix from Filipe for a very old extent buffer reuse race that triggered a BUG_ON. It hasn't come up often, I looked through old logs at FB and we hit it a handful of times over the last year. The rest are other corners he hit during testing" * 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix race when reusing stale extent buffers that leads to BUG_ON Btrfs: fix race between block group creation and their cache writeout Btrfs: fix panic when starting bg cache writeout after IO error Btrfs: fix crash after inode cache writeback failure
2015-05-16Merge branch 'master' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "Seven small fixes. The shortlog below is a good description so no need to elaborate. It has sat in linux-next and survived the usual automated testing by Imagination's test farm" * 'master' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: tlb-r4k: Fix PG_ELPA comment MIPS: Fix up obsolete cpu_set usage MIPS: IP32: Fix build errors in reset code in DS1685 platform hook. MIPS: KVM: Fix unused variable build warning MIPS: traps: remove extra Tainted: line from __show_regs() output MIPS: Fix wrong CHECKFLAGS (sparse builds) with GCC 5.1 MIPS: Fix a preemption issue with thread's FPU defaults
2015-05-16Merge tag 'arc-4.1-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta. * tag 'arc-4.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: inline cache flush toggle helpers ARC: With earlycon in use, retire EARLY_PRINTK ARC: unbork !LLSC build
2015-05-16Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Nothing frightening this time, just smaller fixes in a number of places. The other changes contained here are: MAINTAINERS file updates: - The mach-gemini maintainer is back in action and has a new git tree - Krzysztof Kozlowski has volunteered to be a new co-maintainer for the samsung platforms - updates to the files that belong to Marvell mvebu Bug fixes: - The largest changes are on omap2, but are only to avoid some harmless warnings and to fix reset on omap4 - a small regression fix on tegra - multiple fixes for incorrect IRQ affinity on vexpress - the missing system controller on arm64 juno is added - one revert of a patch that was accidentally applied twice for mach-rockchip - two clock related DT fixes for mvebu - a workaround for suspend with old DT binaries on new exynos kernels - Another fix for suspend on exynos, needs to be backported" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) MAINTAINERS: Add dts entries for some of the Marvell SoCs MAINTAINERS: ARM: EXYNOS: Add Krzysztof Kozlowski as co-maintainer ARM: EXYNOS: Use of_machine_is_compatible instead of soc_is_exynos4 ARM: EXYNOS: Fix failed second suspend on Exynos4 Revert "ARM: rockchip: fix undefined instruction of reset_ctrl_regs" ARM: EXYNOS: Fix dereference of ERR_PTR returned by of_genpd_get_from_provider ARM: EXYNOS: Don't try to initialize suspend on old DT ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for Peach Boards ARM: gemini: fix compiler warning due wrong data type ARM: vexpress/tc2: Add interrupt-affinity to the PMU node ARM: vexpress/ca9: Add interrupt-affinity to the PMU node ARM: vexpress/ca9: Add unified-cache property to l2 cache node ARM64: juno: add sp810 support and fix sp804 clock frequency ARM: Gemini: Maintainers update ARM: OMAP2+: Remove bogus struct clk comparison for timer clock ARM: dove: Add clock-names to CuBox Si5351 clk generator ARM: AM33xx+: hwmod: re-use omap4 implementations for reset functionality ARM: OMAP4+: PRM: add support for passing status register/bit info to reset ARM: AM43xx: hwmod: add VPFE hwmod entries ARM: mvebu: Fix the main PLL frequency on Armada 375, 38x and 39x SoCs ...
2015-05-16Merge branch 'for-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal fixes from Zhang Rui: "Specifics: - fix an issue in intel_powerclamp driver that idle injection target is not accurately maintained on newer Intel CPUs. Package C8 to C10 states are introduced on these CPUs but they were not included in the package c-state residency calculation. From Jacob Pan. - fix a problem that package c-state idle injection was missing on Broadwell server, by adding its id to intel_powerclamp driver. From Jacob Pan. - a couple of small fixes and cleanups from Joe Perches, Mathias Krause, Dan Carpenter and Anand Moon" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: tools/thermal: tmon: fixed the 'make install' command thermal: rockchip: fix an error code thermal/powerclamp: fix missing newer package c-states thermal/intel_powerclamp: add id for broadwell server thermal/intel_powerclamp: add __init / __exit annotations thermal: Use bool function return values of true/false not 1/0
2015-05-16Merge tag 'linux-kselftest-4.1-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Urgent fix for Kselftest regression introduced in 4.1-rc1 by the new x86 test due to its hard dependency on 32-bit build environment. A set of 5 patches fix the make kselftest run and kselftest install" * tag 'linux-kselftest-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests, x86: Rework x86 target architecture detection selftests, x86: Remove useless run_tests rule selftests/x86: install tests selftest/x86: have no dependency on all when cross building selftest/x86: build both bitnesses
2015-05-15Merge branch 'parisc-4.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "One important patch which fixes crashes due to stack randomization on architectures where the stack grows upwards (currently parisc and metag only). This bug went unnoticed on parisc since kernel 3.14 where the flexible mmap memory layout support was added by commit 9dabf60dc4ab. The changes in fs/exec.c are inside an #ifdef CONFIG_STACK_GROWSUP section and will not affect other platforms. The other two patches rename args of the kthread_arg() function and fixes a printk output" * 'parisc-4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc,metag: Fix crashes due to stack randomization on stack-grows-upwards architectures parisc: copy_thread(): rename 'arg' argument to 'kthread_arg' parisc: %pf is only for function pointers
2015-05-15Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"Brian Norris
In commit 8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec" binding"), we added a generic "nor-jedec" binding to catch all mostly-compatible SPI NOR flash which can be detected via the READ ID opcode (0x9F). This was discussed and reviewed at the time, however objections have come up since then as part of this discussion: http://lkml.kernel.org/g/20150511224646.GJ32500@ld-irv-0074 It seems the parties involved agree that "jedec,spi-nor" does a better job of capturing the fact that this is SPI-specific, not just any NOR flash. This binding was only merged for v4.1-rc1, so it's still OK to change the naming. At the same time, let's move the documentation to a better name. Next up: stop referring to code (drivers/mtd/devices/m25p80.c) from the documentation. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Rutland <mark.rutland@arm.com>
2015-05-15MIPS: tlb-r4k: Fix PG_ELPA commentJames Hogan
The ELPA bit in PageGrain is all about large *physical* addresses, so correct the reference to "large virtual address" in the comment above where it is set for MIPS64. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10038/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-05-15MIPS: Fix up obsolete cpu_set usageEzequiel Garcia
cpu_set was removed (along with a bunch of cpumask helpers) by commit 2f0f267ea072 ("cpumask: remove deprecated functions."). Fix this by replacing cpu_set with cpumask_set_cpu. Without this fix the following error is triggered when CONFIG_MIPS_MT_FPAFF=y. arch/mips/kernel/smp-cps.c: In function 'cps_smp_setup': arch/mips/kernel/smp-cps.c:95:3: error: implicit declaration of function 'cpu_set' [-Werror=implicit-function-declaration] Fixes: 90db024f140d ("MIPS: smp-cps: cpu_set FPU mask if FPU present") Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Acked-by: Niklas Cassel <niklass@axis.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9912/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-05-15Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build fix from Ingo Molnar: "A bzImage build fix on older distros" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Fix 'make bzImage' on older distros
2015-05-15Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Two fixes: a suspend/resume related regression fix, and an RT priority boosting fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Fix regression in cpuset_cpu_inactive() for suspend sched: Handle priority boosted tasks proper in setscheduler()
2015-05-15Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also a lockdep annotation fix, a PMU event list fix and a new model addition" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/liblockdep: Fix compilation error tools/liblockdep: Fix linker error in case of cross compile perf tools: Use getconf to determine number of online CPUs tools: Fix tools/vm build perf/x86/rapl: Enable Broadwell-U RAPL support perf/x86/intel: Fix SLM cache event list perf: Annotate inherited event ctx->mutex recursion
2015-05-15Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Ingo Molnar: "A tegra irqchip driver memory corruption fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: tegra: Set the proper base address in irq chip data
2015-05-15Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Radeon: one oops fix, one bug fix, one pci id addition patch i915: one suspend/resume regression fix. All seems quiet enough." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: don't do mst probing if MST isn't enabled. drm/radeon: add new bonaire pci id drm/radeon: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling drm/i915: Avoid GPU hang when coming out of s3 or s4
2015-05-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "8 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, numa: really disable NUMA balancing by default on single node machines MAINTAINERS: update Jingoo Han's email address CMA: page_isolation: check buddy before accessing it uidgid: make uid_valid and gid_valid work with !CONFIG_MULTIUSER kernfs: do not account ino_ida allocations to memcg gfp: add __GFP_NOACCOUNT tools/vm: fix page-flags build drivers/rtc/rtc-armada38x.c: remove unused local `flags'
2015-05-15Merge tag 'samsung-fixes-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung 2nd fixes for v4.1" from Kukjin Kim: - fix second S2R on exynos4412 based Trats2, Odroid U3 boards which happened after enabling L2$ and caused by commit 13cfa6c4f7fa ("ARM: EXYNOS: Fix CPU idle clock down after CPU off") And replace the soc_is_exynosxxx() macro with of_compatible_xxx - fix dereference of ERR_PTR of of_genpd_get_from_provider() - fix suspend problem on old DT machines to skip the initialization suspend and caused by commit 8b283c025443 ("ARM: exynos4/5: convert pmu wakeup to stacked domains") - add keep-power-in-suspend for Peach Boards to support S2R and has been missed in previous pull-request for fixes * tag 'samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Use of_machine_is_compatible instead of soc_is_exynos4 ARM: EXYNOS: Fix failed second suspend on Exynos4 ARM: EXYNOS: Fix dereference of ERR_PTR returned by of_genpd_get_from_provider ARM: EXYNOS: Don't try to initialize suspend on old DT ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for Peach Boards
2015-05-15Merge tag 'mvebu-fixes-4.1-2' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann
Merge "mvebu fixes for 4.1 (part 2)" from Gregory CLEMENT: Fix the main PLL frequency on Armada 375, 38x and 39x SoCs Add clock-names to CuBox Si5351 clk generator Add dts entries in the MAINTAINERS file * tag 'mvebu-fixes-4.1-2' of git://git.infradead.org/linux-mvebu: MAINTAINERS: Add dts entries for some of the Marvell SoCs ARM: dove: Add clock-names to CuBox Si5351 clk generator ARM: mvebu: Fix the main PLL frequency on Armada 375, 38x and 39x SoCs
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-06 00:38:32 +0000