summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-03ARM: imx/mx27_3ds: Add PMIC supportFabio Estevam
MX27_3DS board has a MC13783 PMIC connected to the CSPI2 port. Add support for the PMIC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03mx51: fix usb clock supportArnaud Patard (Rtp)
Current code doesn't really enable the usb clocks so if they're disabled when booting linux, the kernel/machine will hang as soon as someone is trying to read a usb register Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03MX51: Add support for usb host 2Arnaud Patard (Rtp)
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03arch/arm/plat-mxc/ehci.c: fix errors/typosArnaud Patard (Rtp)
This patch is fixing some issues : - MXC_OTG_UCTRL_OPM_BIT is for USBCTRL register and not PHYCTRL register. - the MXC_EHCI_WAKEUP_ENABLED check was only clearing the bits so never allows to set them. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03ARM: mx3/mx31_3ds: Add support for USB Host2 portFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03ARM: mx3/mx31_3ds: Add support for OTG host modeFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03ARM: imx/mx25_3ds: Add USB supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03ARM: imx/mx27_3ds: Add USB OTG supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03ARM: mx3/mx35_3ds: Add USB OTG Host modeFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03Merge branch 'sgu/mxs-core-v8' of git://git.pengutronix.de/git/ukl/linux-2.6 ↵Sascha Hauer
into imx-for-2.6.38-new
2011-01-03arm: mx50: add mx50 reference design board supportRichard Zhao
Add basic function and uart device support. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03arm: mx50: add core functions support except clockRichard Zhao
Add core definitions and memory map, gpio, irq, iomux, uart device support. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03arm: mx5: mx51/53 have different mxc_cpu_type definitionRichard Zhao
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03arm: mx51: define mx51's own MXC_GPIO_IRQSRichard Zhao
mx5 SoCs have different GPIO port count. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03arm: plat-mxc: add full parameter macro to define gpio portRichard Zhao
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03ARM: mx5: use config to define boot related addressesRichard Zhao
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-20ARM: mxs: Add build configuration for mxsShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add initial mx28evk supportShawn Guo
Add initial mx28evk support with duart and fec0. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add initial mx23evk supportShawn Guo
Add initial mx23evk support with duart. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Dynamically allocate fec devicesShawn Guo
Dynamically allocate fec devices for MX28, which gets dual fec interface. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Dynamically allocate duart devicesShawn Guo
Dynamically allocate duart devices for MX23 and MX28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add static memory mappingShawn Guo
Create static memory mapping for MX23 and MX28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add clock supportShawn Guo
Add clock for MXS-based SoCs, MX23 and MX28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add iomux supportShawn Guo
MXS-based SoCs implements iomux functions in block PINCTRL. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add gpio supportShawn Guo
MXS-based SoCs implement gpio support in block PINCTRL. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add timer supportShawn Guo
There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add low-level debug UART supportShawn Guo
- DEBUG_LL support, which is incompatible with multi-soc MXS image because of different DUART base address on MX23 and MX28 - uncompress message support Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add interrupt supportShawn Guo
Add Interrupt Collector (ICOLL) support for MXS-based. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add reset routinesShawn Guo
- The mxs wdog is implemented in RTC block. - There is a generic software reset routine for most modules on mxs. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-15ARM i.MX51: Full iomux supportSascha Hauer
This iomux file has been constructed from the Freescale pinmux tool. It contains all pins from the tool, but the datasheet lists some configurations not present in the tool, these are not yet added. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-15MXC IOMUX-V3 replace struct pad_desc with bitmapped cookie (step 2)Lothar Waßmann
This patch actually replaces the 'struct pad_desc' with a u64 cookie to facilitate adding platform specific pad_ctrl settings to an existing pad definition. So, instead of: iomux_v3_cfg_t power_key = MX51_PAD_EIM_A27__GPIO_2_21; power_key.pad_ctrl = MX51_GPIO_PAD_CTRL_2; mxc_iomux_v3_setup_pad(&power_key); one can write: mxc_iomux_v3_setup_pad((MX51_PAD_EIM_A27__GPIO_2_21 & ~MUX_PAD_CTRL_MASK) | MX51_GPIO_PAD_CTRL_2); Patch applies to branch 'imx-for-2.6.38' of git://git.pengutronix.de/git/imx/linux-2.6 Signed-Off-By: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-14ARM: mx5: check for error in ioremapFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-14Fix imx cpufreq driver as moduleArnaud Patard (Rtp)
When building as module: ERROR: "cpufreq_gov_performance" [arch/arm/plat-mxc/cpufreq.ko] undefined! WARNING: modpost: Found 1 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 It's due to the driver using CPUFREQ_DEFAULT_GOVERNOR, even it should not (see commit 8122c6cea033e8034e99d3b10a4e3f377ce23994 in Linus tree), so remove it. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-14mx51: support FIQ on TZIC, revisedPeter Horton
Add support for FIQ on mx51 TZIC TZIC changes tested with FIQ audio on an mx51 board AVIC changes build with mx3_defconfig, not tested Signed-off-by: Peter Horton <phorton@bitbox.co.uk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-14ARM: imx/mx27_3ds: Add watchdog supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-14ARM: mx3/mx31_3ds: Add watchdog supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-14mx51: add SSI3Peter Horton
Add SSI3 to MX51 Signed-off-by: Peter Horton <phorton@bitbox.co.uk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-14watchdog: imx: use clk_get to acquire the watchdog clockFabio Estevam
Use clk_get to acquire the watchdog clock and also avoid hardcoding the clock name. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-13ARM: mxs: Add helper definition and functionShawn Guo
Add helper definition and function for MXS-based. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-13ARM: mxs: Add core definitionsShawn Guo
Add core definitions for MXS-based SoC MX23 and MX28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-07ARM: mx5/mx51_babbage: Add watchdog supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-07ARM: mx5: add watchdog clocksFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-07ARM: mx5: add support for the two watchdog modulesFabio Estevam
MX51 has two watchdog modules. Add support for both of them. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-07Merge branch 'irq-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Fix incorrect proc spurious output
2010-12-07Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: wmi: use memcmp instead of strncmp to compare GUIDs ACPI, hp-wmi: Fix memory leak in acpi query msi-wmi: fix semantically incorrect use of keycode instead of scancode msi-wmi: Add mute key support asus-laptop: add wimax and wwan support eeepc-wmi: fix compiler warning ibm_rtl: _RTL_ is not available in UEFI mode ibm_rtl: Loosen the DMI criteria to all IBM machines drivers/platform/x86/thinkpad_acpi.c: delete double assignment eeepc-wmi: add cpufv sysfs documentation toshiba_acpi.c: Add key_entry for a lone FN keypress ibm_rtl: fix printk format warning
2010-12-07Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] css: fix rsid evaluation for 2nd crw [S390] nohz/s390: fix arch_needs_cpu() return value on offline cpus
2010-12-07autofs4 - remove ioctl mutex (bz23142)Ian Kent
With the recent changes to remove the BKL a mutex was added to the ioctl entry point for calls to the old ioctl interface. This mutex needs to be removed because of the need for the expire ioctl to call back to the daemon to perform a umount and receive a completion status (via another ioctl). This should be fine as the new ioctl interface uses much of the same code and it has been used without a mutex for around a year without issue, as was the original intention. Ref: Bugzilla bug 23142 Signed-off-by: Ian Kent <raven@themaw.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-06Linux 2.6.37-rc5v2.6.37-rc5Linus Torvalds
2010-12-06Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2_connection_find() returns pointer to bad structure ocfs2: char is not always signed Ocfs2: Stop tracking a negative dentry after dentry_iput(). ocfs2: fix memory leak fs/ocfs2/dlm: Use GFP_ATOMIC under spin_lock
2010-12-06ARM: tegra: fix regression from addruart rewriteOlof Johansson
Commit 0ea129300982 ("arm: return both physical and virtual addresses from addruart") took out the test for MMU on/off but didn't switch the ldr instructions to no longer be conditionals based on said test. Fix that. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>