summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-09-21iwlwifi: mvm: rs: fix logic in case of multiple TIDsEyal Shapira
In case of traffic on multiple TIDs where one is aggregated and the other is not RS would toggle between considering traffic vs. the station as aggregated and not aggregated. Instead consider the sta state as aggregated as long as there's at least one TID aggregated. This limitation is because the rates table is kept per station and not per TID. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-21iwlwifi: mvm: report all BA notifs to RSEyal Shapira
Currently BA notifications which don't reclaim any frames would not cause the RS to be called as no skbs are passed to mac80211. This is not optimal as RS can benefit from the statistics of sent vs. acked of such a BA. This can improve the reaction time of the RS algorithm. Also, an upcoming change in the firmware would cause BA timeout to be reported as a BA notif with 0 acked so this change is required for that as well. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-21iwlwifi: 8000: fix fw name to account for revisionLiad Kaufman
The 8000 HW series also includes the revision in the FW name. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-21iwlwifi: pcie: fix HW_REV saving for 8000 seriesLiad Kaufman
Align the trans->hw_rev variable format with previous series format. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-21iwlwifi: Add missing PCI IDs for the 7260 seriesOren Givon
Add 4 missing PCI IDs for the 7260 series. Cc: <stable@vger.kernel.org> [3.10+] Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-21iwlwifi: mvm: limit aggregation size in low latency to 6Eyal Shapira
This is a tradeoff between enabling better throughput for bursty traffic and low latency. The number 6 was found to be a good tradeoff for the Miracast use case which is the major use case for low latency. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-21iwlwifi: mvm: rs: refactor to allow direct rs updatingEyal Shapira
Enable RS to get updated directly via iwl_mvm_rs_tx_status which will be called by the driver and not via mac80211 rate control. This is required for a following patch to report on BAs which do not cause the BA window to progress. Also this is a first step in decoupling rs from the mac80211 rate control. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-21iwlwifi: mvm: choose an initial tx rate based on rssi conditionsEyal Shapira
Improve the initial tx rate and antenna selection to be based on the rssi of the last rx. This avoids starting at the lowest legacy rate always and requiring more tx traffic to "climb" up the rates. Since this option might cause trouble in certain setups, allow to disable it by default. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-16iwlwifi: mvm: Allow schedule scan while connectedAlexander Bondar
In the past when schedule scan was started while connected on one of interfaces FW crashes were observed. In the newest FW this issue is solved, so remove limitaion after examining corresponding TLV flag. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-16iwlwifi: mvm: add debugfs entry to read the current temperatureLuciano Coelho
When read, this new debugfs entry requests the current temperature from the firmware and outputs it. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-16iwlwifi: mvm: prepare for scheduler config commandAvri Altman
The scheduler is a HW sub-block that directs the work of the Flow Handler by issuing requests for frame transfers, specifying source and destination. Its primary function is to allocate flows into the TX FIFOs based upon a pre-determined mapping. The driver has some responsibilities to the scheduler, namely initialising and maintaining the hardware registers. This is currently done by directly accessing them, which can cause races with the firmware also accessing the registers. To address this problem, change the driver to no longer directly access the registers but go through the firmware for this if the firmware has support for DQA and thus the new command. Signed-off-by: Avri Altman <avri.altman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-16iwlwifi: mvm: Set RRM_ENABLED bit in scan commandsAndrei Otcheretianski
Set RRM_ENABLED (bit 6) flag in scan commands. When this flag is set the fw will add WFA vendor-specific TPC report and DS parameter set IEs into probe requests. This bit is set for SCAN_OFFLOAD_REQUEST_CMD(0x51). Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Assaf Krauss <assaf.krauss@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-16iwlwifi: mvm: Announce Quiet Period supportAssaf Krauss
Add a ucode capability flag for support of Quiet Period (part of RRM). If this flag is set, advertise device support. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-16iwlwifi: mvm: Update TX power in TPC reportsAndrei Otcheretianski
Introduce new tx command flag (TX_CMD_FLG_WRITE_TX_POWER) which requests the fw to update the tx power value at some constant offset. Set this flag when transmitting either TPC report or Link measurement report action frames. In addition, introduce new tlv which indicates whether the fw supports power insertion (IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT) and publish the corresponding nl80211 feature. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-16iwlwifi: mvm: support cloned tx skbsIdo Yariv
Since tx skbs are not modified by the driver, let mac80211 know the driver can handle cloned skbs. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-15Merge tag 'mac80211-next-for-john-2014-09-12' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg <johannes@sipsolutions.net> says: "This time, I have some rate minstrel improvements, support for a very small feature from CCX that Steinar reverse-engineered, dynamic ACK timeout support, a number of changes for TDLS, early support for radio resource measurement and many fixes. Also, I'm changing a number of places to clear key memory when it's freed and Intel claims copyright for code they developed." Conflicts: net/mac80211/iface.c Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2014-09-14iwlwifi: mvm: align CSA GO NOA time event naming with the firmwareLuciano Coelho
The time event used for CSA GO will also be used by CSA client. Rename the symbols to something more generic and aligned with the firmware code. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: move IWL_MVM_UAPSD_QUEUES to constants.hEliad Peller
Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: fix PSM disable during TDLSArik Nemtsov
Simplify the code and check for TDLS stations just before sending the MAC_POWER_TABLE command. The previous version of the code still allowed PM in some multi-interface scenarios even with TDLS connected. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: Fix skip over dtim configuration in d0i3Avri Altman
There was some confusion concerning the units of the beacon interval. The driver assumed that it was in msec where it was in TU - so fix that. Skip over dtim was capped by 300TU where it should be by 306TU. It should also be subjected to several conditions: Not a DFS channel, dtim period < 10, and the multicast wake-lock is off. Concerning multicast lock - there is an implementation gap in the supplicant, so just leave a TODO. Signed-off-by: Avri Altman <avri.altman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: move TDLS code to separate fileArik Nemtsov
The upcoming TDLS channel-switch functionality is big enough to warrant a separate file. Move existing related functions to the new file. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: update QoS parameters when they changeJohannes Berg
The QoS parameters can change during the lifetime of the BSS, and more importantly hostapd only sets up the correct ones after having started the AP/GO. Resend the MAC context when the parameters change, with the updated parameters. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: reduce active dwell timeDavid Spinadel
Reduce basic active dwell time from 30 ms on 2.4 GHz and 20 on 5.2 to 20 on 2.4 and 10 on 5.2. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: fix quota update avoidanceJohannes Berg
When not updating the quota, the new command shouldn't be stored as otherwise slowly drifting quota would never update the firmware. Fix this by storing the command only when it was also sent. Since the error message also only makes sense when attempting to send the command, just short-circuit the function when there's no need to send the command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: allow to collect debug data when restart is disabledEmmanuel Grumbach
In some testing configuration, the firmware restart flow is not enabled. Allow to collect logs even in this case. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: use the firmware to get the temperature during CT killLuciano Coelho
Reading the temperature directly from the hardware, without the help of the firmware, is a complex process and is not entirely the same for different hardware. Also, some NICs don't easily allow access to the sensors when the firmware is not running, which would add even more complexity to the code. To reduce the code complexity and to avoid code duplication between the firmware and the driver, boot the firmware briefly to read the current temperature while in CT kill mode. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: update d0i3 debugfsJohannes Berg
A lot of the newer d0i3 ref additions weren't added to the debugfs file, fix that and add a comment to remember to do it in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: remove unused static inline functionAvri Altman
Signed-off-by: Avri Altman <avri.altman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi/iwl-drv.c: fix typo defualt -> defaultToralf Förster
trivial, but this is user visible b/c it is in the help text Signed-off-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: don't update quota in firmware too oftenJohannes Berg
When updating quota in the firmware, it has to reset quite a bit of internal state, which apparently can have an adverse impact on its operation. Avoid that by only updating the quota command when there are any signification changes, i.e. added/removed bindings or changes in quota that are bigger than 8 TU within a binding. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: define the non shared antenna per hardwareEmmanuel Grumbach
The sharing model will differ in new hardware. Define the non shared antenna based on the device so that different devices can have different names for the non shared antenna. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: pcie: clear command data on freeingJohannes Berg
When freeing the structures used for command data, clear their memory as they may have contained key material at some point. Also clear the duplicated buffer when freeing it to be safe; currently key material is never put there but that may change. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: make hw rev checking more readableLiad Kaufman
Rather than ANDing with a mask - use existing macros, which are more readable. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: trans: don't configure the set_active in SCD for dvmEmmanuel Grumbach
This configuration is not needed for dvm, and it actually broke it. Reported-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: disable aggregation queues in station DB in FWJohannes Berg
When disabling aggregation, disable the queues in the station DB in the firmware, otherwise we leave the tfd_queue_mask in a wrong state after an aggregation session has been torn down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: rs: don't zero tx stats after idleEyal Shapira
Move the tx stats to the persistent area of lq_sta to avoid them being zeroed out every time rs reinitializes which happens after tx idle for 5 secs for example. The automatic zeroing out made them difficult to use. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: add MVM_FW_MCAST_FILTER_PASS_ALL optionMax Stepanov
Add MVM_FW_MCAST_FILTER_PASS_ALL option to iwl-dbg-cfg.ini configuration file to enable/disable FW multicast filtering. Signed-off-by: Max Stepanov <Max.Stepanov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: fail temp test enabling if the ucode is not loadedLuciano Coelho
If the ucode is not loaded, don't allow the temperature test to be started, but allow it to be changed or stopped if already running. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: reset ucode_loaded flag when mac80211 stop is calledLuciano Coelho
We rely on the value of the mvm->ucode_loaded flag to decide whether or not we can perform certain operations (e.g. access to some debugfs entries), so we need to reset it when the mac80211 stop operation is called and the hardware is shutdown. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: rs: remove max_rate_idxEyal Shapira
max_rate_idx constraint is deprecated and it's handling is faulty as well as it is relevant only for legacy rates but was considered in HT/VHT. In most cases there was no side effect as max_rate_idx was set to -1 but in certain cases like P2P it got set to an actual rate idx which would limit the maximum rate in HT/VHT by mistake. max_rate_idx should be replaced by the masks fields but for now remove it. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: enable LDPC in 8000 chip familyEyal Shapira
This chip family supports LDPC so enable it. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: allow preventing dummy notificationsEran Harary
The firwmare now allows the driver to disable dummy notifications. These notifications sent by the firmware are an overhead for slow buses. They are still useful for fast buses. Add a hardware switch to prevent these notifications only on devices that work on slow buses. Signed-off-by: Eran <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: add and edit 8000 series PCI IDsOren Givon
Edit some 8000 series PCI IDs and add configuration to Dual Band Wireless N 8260 devices. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: add LDPC supportEyal Shapira
Use LDPC for Tx and publish support for Rx in case the chip supports LDPC. Enable it for the 7265 family. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14Merge remote-tracking branch 'iwlwifi-fixes/master' into NEXTEmmanuel Grumbach
2014-09-11ath9k: Fix beacon miss handlingSujith Manoharan
The NoA duration for a GO is half the beacon interval and a concurrent context like a STA can be active only for that duration, before switching back to the GO's operating channel. Currently, when multiple beacons are missed, the dwell time for the STA context is extended to improve the chances of receiving a beacon. But the NoA is not updated and this will cause problems since the GO is offline for a period that is longer than the advertised duration. Fix this by ensuring that the NoA is updated first before extending the time slot for the STA context. Also make sure that non-periodic NoA is used for a one-time, longer absence period. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11ath9k: Fix channel switch time durationSujith Manoharan
Since the NoA duration is the maximum time the GO interface can be offline, it needs to include the time take to switch channels in the HW. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11ath9k: Clear offchannel duration properlySujith Manoharan
Clearing the offchannel duration value in the scheduler unconditionally breaks NoA when multiple contexts are active and an offchannel request is deferred, for example, in a scan run. Fix this by clearing the duration only if there is no pending offchannel request. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11ath9k: Fix Notice of Absence issuesSujith Manoharan
* The index has to incremented only when advertising a new NoA schedule. * Switch to non-periodic NoA when starting a scan operation and multiple channel contexts are active. * Make sure that periodic NoA is advertised again when scan ends. Since the offchannel timer moves the offchannel state to IDLE after the GO operating channel becomes active, use a flag "force_noa_update" to update the NoA contents. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-06-01 00:47:23 +0000