summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2014-01-09colibri_vf: enable/fix clock and power management debugMarcel Ziswiler
2014-01-02mtd: m25p80: set writebufsizeBrian Norris
2013-12-16Allow SW1 on TWR-VF65GS10 to be a wake-up event for TWR-VF600Anthony Felice
2013-12-16Only allow i2c driver to assign mvf_sema4 once.Anthony Felice
2013-11-29colibri_vf: fix pixel clock polarityColibri_VF_LinuxImageV2.1Beta2_20131129Marcel Ziswiler
2013-11-29colibri_vf: fix daisy chain input select iomuxMarcel Ziswiler
2013-11-29colibri_vf: enable watchdogMarcel Ziswiler
2013-11-29colibri_vf: fix ifdefsMarcel Ziswiler
2013-11-21Fix typo in DSPI2 and DSPI3 base address3.0-vybrid-ts2.10Anthony Felice
2013-11-21colibri_vf: rename colibri_vf50 to colibri_vfMarcel Ziswiler
2013-11-21colibri_vf: allow 500 mhz a5 frequencyMarcel Ziswiler
2013-11-17colibri_vf50: clock: mvf_dcu: add more display timingsMarcel Ziswiler
2013-11-17colibri_vf50: mvf_dcu: use 16 bpp by defaultMarcel Ziswiler
2013-11-17mvf_dcu: add 16 bpp supportMarcel Ziswiler
2013-11-17Add BPP ARGB8888 support for DCU driverAlison Wang
2013-11-17colibri_vf50: fix vesa vga display timingMarcel Ziswiler
2013-11-14Add missing Global Timer source file.3.0-vybrid-ts2.9Anthony Felice
2013-11-07Add defconfig for Vybrid Tower3.0-vybrid-ts2.8Anthony Felice
2013-11-07Fix FAST_READ for QSPI nor flash support.Anthony Felice
2013-11-07Add Global Timer support to fix High Resolution Timer functionality.Anthony Felice
2013-11-06Merge branches 'vf-thermal' and 'colibri-vf50-ts-fix' into colibri_vfStefan Agner
2013-11-06colibri-vf50-ts: Use complete feature tableStefan Agner
2013-11-05mvf_adc: read temperature sensor and use hwmon interfaceStefan Agner
2013-11-05mvf_adc: support all 32 channelsStefan Agner
2013-11-05mvf_adc: fix register configuration in adc_setStefan Agner
2013-11-05mvf_adc: Fix memory leakStefan Agner
2013-11-05mvf_adc: Destroy device on removeStefan Agner
2013-10-21colibri_vf50: hackish USBH_PEN implementationColibri_VF50_LinuxImageV2.1Beta1_20131022Marcel Ziswiler
2013-10-21colibri_vf50: setup memory if mem= is not passed to kernelMarcel Ziswiler
2013-10-21colibri_vf50: enable uart rts/ctsMarcel Ziswiler
2013-10-21colibri_vf50: integrate backlightMarcel Ziswiler
2013-10-21colibri_vf50: iomux: re-work pin muxingMarcel Ziswiler
2013-10-21colibri_vf50: disable magic sysrq key configurationMarcel Ziswiler
2013-10-21colibri_vf50: decrease dma zone size configurationMarcel Ziswiler
2013-10-21colibri_vf50: enable tmpfs posix acl configurationMarcel Ziswiler
2013-10-21colibri_vf50: re-enable L2 cache configurationMarcel Ziswiler
2013-10-21Merge branch '3.0-mvf' into colibri_vfMarcel Ziswiler
2013-10-04Fix typo in MVF_USBPHY1_BASE_ADDR that caused a segmentation fault3.0-vybrid-ts2.7Anthony Felice
2013-10-04Add mvf_sema4.h to header install list and allow to be includedAnthony Felice
2013-10-04Prevent L2 cache initialisation if CONFIG_CACHE_L2X0 is enabled andAnthony Felice
2013-10-02colibri_vf50_defconfig: Enable Colibri VF50 touchscreen driverStefan Agner
2013-10-02colibri-vf50-ts/mvf-adc: Moved touchscreen support in a moduleStefan Agner
2013-10-02mvf_adc: Add touch detection supportStefan Agner
2013-10-01mvf_adc: Improved touchscreen support, calculated pressureStefan Agner
2013-09-30mvf_adc: Initial touchscreen supportStefan Agner
2013-09-24mvf-gpio: Don't overwrite mux flagsStefan Agner
2013-09-24mvf: Added clock and register platform data for ADC1Stefan Agner
2013-09-24mvf_adc: allow multiple device instancesStefan Agner
2013-09-24colibri_vf50: Added pinmux for touchscreen support on Colibri VF50Stefan Agner
2013-09-23fsl_nfc: integrate mxc_nand platform data handlingMarcel Ziswiler
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-28 14:27:13 +0000