summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2012-02-21ENGR00171079-3 fsl_devices add generic audio codec platform dataAdrian Alonso
2012-02-21ENGR00171079-2 mx6 add anaclk_2 io buffers enable macrosAdrian Alonso
2012-02-21ENGR00171079-1 mx6q-ard: esai remove record early paramAdrian Alonso
2012-02-21ENGR00175049 - Remove section mismatch warning for Max17135Danny Nold
2012-02-21ENGR00174925 HDMI Kernel panic whatever plug in or plug outAlan Tull
2012-02-21ENGR00174897 i.mx6: clock: fix axi clock mux settingJason Liu
2012-02-21ENGR00174896 i.mx6: i.mx6l: clock: gpu/vpu clock adjustmentJason Liu
2012-02-21ENGR00174904 VPU: change spinlock to mutexSammy He
2012-02-21ENGR00174654 Update gpu kernel driver to vivante 4.6.5 releaseb02279
2012-02-21ENGR00174899: mx6/dl:gpu2d:fix gc320 can not run at high core clock issueWu Guoxing
2012-02-21ENGR00174892 [MX6]MMC: support SD3.0 UHS-I DDR50 mode.Ryan QIAN
2012-02-20ENGR00174829-2 power: max8903_charger: fix build warrning.Zhang Jiejing
2012-02-20ENGR00174829-1 MX6Q_SABRESD: fix warnning messageZhang Jiejing
2012-02-20ENGR00174824 [MX6]Add workaround for i.MX6DL suspend/resumeAnson Huang
2012-02-20ENGR00174634 MIPI DSI: Add MIPI LCD ID detect and disable clock when no panel.Wayne Zou
2012-02-17ENGR00174809 hdmi audio oops in hdmi_dma_mmap_copyAlan Tull
2012-02-17ENGR00173964 make hdmi audio init dependent on hdmi video initAlan Tull
2012-02-17ENGR00174747 ASRC:fix spinlock bugChen Liangjun
2012-02-17ENGR00174630 [MX6]Disable GPT serial clockAnson Huang
2012-02-17ENGR00174732 ASRC:close core clock if ASRC idleChen Liangjun
2012-02-16ENGR00174652 i.mx6: explicitly set the LPM mode to run mode during early bootupJason Liu
2012-02-16ENGR00174394 MX6Q_arm2/MX6Q_sabreauto: change ipu_id/disp_id for LDB config.Wayne Zou
2012-02-16ENGR00174649 i.mx6dl: clock: set ipu1 clock to 270M, change ldb_di_clk parentWayne Zou
2012-02-16ENGR00174540: i.mx6: anatop_regulator: LDO voltage print not correctlyJason Liu
2012-02-16ENGR00174532 [mx6Q]Change 2D clock to 480MLarry Li
2012-02-15ENGR00174106-3 - EPDC fb: Support EPDC v2.0Danny Nold
2012-02-15ENGR00174106-2 - EPDC fb: Add waveform file for E Ink Pearl panelDanny Nold
2012-02-15ENGR00174106-1 - EPDC fb: Support EPDC on MX 6DL/SDanny Nold
2012-02-15ENGR00172274-02 - [MX6]: rework IEEE-1588 in MX6Q Sabre-lite/sd board.Fugang Duan
2012-02-15ENGR00174425: i.mx6: i.mx6dl: clock: set gpu2d_axi clock parent to mmdc0Jason Liu
2012-02-15ENGR00174423-2: i.mx6: clock: code clean up in pfd_set_rateJason Liu
2012-02-15ENGR00174423-1 i.mx6: cpu_op: code clean upJason Liu
2012-02-14ENGR00174381 imx6q-sabreauto: spdif remove tx clock settingsAdrian Alonso
2012-02-14ENGR00174299-3: Add ePxP config option in defconfigRobby Cai
2012-02-14ENGR00174299-2: MSL part: add ePxP V2 driverRobby Cai
2012-02-14ENGR00174299-1: driver part: Add ePxP v2 DMAENGINE driverRobby Cai
2012-02-14ENGR00174437 ESAI: Add cs42888 build support in Makefile.Lionel Xu
2012-02-14ENGR00174399 ASRC: fix mmap fail bugChen Liangjun
2012-02-14ENGR00174395 V4L2 capture: Driver improvementLiu Ying
2012-02-14ENGR00174121-3 MX6: add max8903 driver in defconfig.Zhang Jiejing
2012-02-14ENGR00174121-2 MX6Q_SABRESD: add battery chip support.Zhang Jiejing
2012-02-14ENGR00174121-1 power: max8903 add support for dcm always high.Zhang Jiejing
2012-02-14ENGR00174296 [MX6_SD]USDHC: iNAND on board failed to work on ddr modeRyan QIAN
2012-02-14ENGR00174323 vpu: Fix system hang issue of multi-instances processingSammy He
2012-02-13ENGR00174243 MIPI_DSI: mipi dsi panel enable should be after IPU initWayne Zou
2012-02-13ENGR00174309:mx6/dl: gpu:enable 2d and 3dWu Guoxing
2012-02-13ENGR00174316 MX6Q ARM2: Fix ov5640_mipi IOMUX incorrect configureEven Xu
2012-02-13ENGR00174315 MX6Q max7310 set the default value of PCIE PWR ctrl2 to lowRichard Zhu
2012-02-13ENGR00174310 [MX6Q]USDHC: DDR50 mode for SD3.0 is not supported yetRyan QIAN
2012-02-13ENGR00174311: [MX6Q]USDHC: SD3.0 card failed to workRyan QIAN
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-29 04:21:41 +0000