summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-09-21sh: Add maple bus support for the SEGA Dreamcast.Adrian McMenamin
The Maple bus is SEGA's proprietary serial bus for peripherals (keyboard, mouse, controller etc). The bus is capable of some (limited) hotplugging and operates at up to 2 M/bits. Drivers of one sort or another existed/exist for 2.4 and a rudimentary port, which didn't support the 2.6 device driver model was also in existence. This driver - for the bus logic itself and for the keyboard (other drivers will follow) are based on the code and concepts of those old drivers but have lots of completely rewritten parts. I have the maple bus code as a built in now as that seems the sane and rational way to handle something like that - you either want the bus or you don't. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Magic Panel MTD mapping update.Markus Brunner
This update moves the flash mapping for the Magic Panel into the board setup. It also removes references to the old MTD mapping option in the defconfig. Signed-off by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: rts7751r2d: Fix up trivial build failure.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: rts7751r2d cf_ide reworkAoi Shinkai
Support CF IDE on R2D-1 boards. Signed-off-by: Aoi Shinkai <shinkoi2005@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Fix up extended mode TLB for SH-X2+ cores.Paul Mundt
The extended mode TLB requires both 64-bit PTEs and a 64-bit pgprot, correspondingly, the PGD also has to be 64-bits, so fix that up. The kernel and user permission bits really are decoupled in early cuts of the silicon, which means that we also have to set corresponding kernel permissions on user pages or we end up with user pages that the kernel simply can't touch (!). Finally, with those things corrected, really enable MMUCR.ME and correct the PTEA value (this simply needs to be the upper 32-bits of the PTE, with the size and protection bit encoding). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Wire up URAM node on SH7785.Paul Mundt
Add SH7785 URAM as node 1, follows the SH-X3 change. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: se7206: update defconfig.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: se7206: Handle non-SuperIO I/O ports.Paul Mundt
This fixes up the port calculation logic for non-SuperIO accesses, before these were always matching the MRSHPC base, now just make sure the original port is handed back if it's not in the I/O port range. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: r7780rp: irq-r7780rp needs linux/io.h.Paul Mundt
Trivial build fix. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: hp6xx: Trivial build fixes for INTC changes.Paul Mundt
Get the IRL->IRQ stuff building. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: se7206: heartbeat needs 32-bit writes.Paul Mundt
Most boards use 8 or 16-bit access for the LED bank, se7206 needs 32. There's only 8 individual LEDs however, each with a 'special' value in terms of logical ordering. Go FPGA, go! Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: se7206: Make the I/O port routines less stupid.Paul Mundt
The port routines were logically inverted, and the MRSHPC range had no upper bound, causing 8 and 16-bit port I/O to get mangled. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Magic Panel R2 board support.Markus Brunner
This adds support for the SH7720 (SH3-DSP) based Magic Panel R2 board. Signed-off-by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: hp6xx: Enable pata_platform in defconfig.Kristoffer Ericson
Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: hp6xx: Enable touchscreen and powerbutton IRQs.Kristoffer Ericson
IRQ0->IRQ3 need to be an IRQ mode for these to work, fix them up. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Don't enable FPU for SH4AL-DSP.Paul Mundt
This leads to invalid configurations where both FPU and DSP support can be enabled in the same kernel, resulting in build failure. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: dma: Fix CONFIG_SYSFS=n build.Paul Mundt
Trivial build fix for when sysfs is disabled. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: INTC stubs for SH7343 and SH7770 builds.Paul Mundt
Get the SH7343 and SH7770 stuff linking again. Both of these still require proper INTC support. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21serial: sh-sci: kgdb console build fixes.Paul Mundt
The kgdb console code requires uart_set_options() and friends, which are only provided by the serial core when console support is enabled. These were sitting under CONFIG_SH_KGDB and resulted in a link error when console support wasn't enabled, work that by rolling the console routines under CONFIG_SH_KGDB_CONSOLE, which they should have been all along. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: hp6xx: Update CF IRQ for INTC changes.Kristoffer Ericson
The vector changed, so follow the INTC changes for the new vector. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: dma: Fix up build for SH7709 support.Kristoffer Ericson
Trivial build fixes for SH7709. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: hd64461: Trivial build fixes for SH7709.Kristoffer Ericson
Some trivial fixes to get SH7709 + HD64461 building again. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21backlight: Fix up hp680_bl build.Kristoffer Ericson
Trivial build fixes. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: hp6xx: APM build fix and new battery values.Kristoffer Ericson
Build fixes for the hp6xx APM code, as well as some adjustments for the battery values. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: update hp6xx defconfig.Kristoffer Ericson
hp6xx_defconfig resync. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Fix OFFCHIP_IRQ_BASE compile error.Kristoffer Ericson
HP6xx uses OFFCHIP_IRQ_BASE to know the base irq number where non cpu interrupts should start. This define was in irq.h before, but since rework got lost. It really belongs inside hd64461.h since the hp6xx wont work without it. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: nommu fault handler needs signal.h.Paul Mundt
Trivial build fix. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Fix up se7751 build.Paul Mundt
Trivial compile fix. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: add writesb(), readsb(), writesw() and readsw() to io.hMagnus Damm
This patch adds inline versions of writesb(), readsb(), writesw() and readsw() to include/asm-sh/io.h. Stolen from include/asm-avr32/io.h. These functions are needed to compile certain device drivers such as ax88796. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: remove sh7780 interrupt controller hack from pci codeMagnus Damm
This patch removes the sh778x specific pci code that pokes in the interrupt controller and overwrites things. The new and improved IRL code manages this in plat_irq_setup() and plat_irq_setup_pins() instead. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - rework higlander irq code for r7780mp and r7785rpMagnus Damm
This patch reworks the highlander irq code for r7780mp and r7785rp. The same strategy as for the new R2D code is used here - the board specific interrupts are now starting from HL_FPGA_IRQ_BASE. The code for r7780rp is not touched due to lack of hardware. Tested with CF, AX88796 on r7780mp and r7785rp. The touch switch interrupt has also been tested on r7780mp. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: minor fixesMagnus Damm
This patch contains the following fixes: - Adds sh7785 support to CONFIG_EARLY_SCIF_CONSOLE_PORT. - Removes duplicate include from rts7751r2d irq code. - Removes CONFIG_CPU_HAS_INTC from sh7720 Kconfig entry. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - irl mode update for sh7780 and sh7785Magnus Damm
This patch contains the following fixes and improvements: - Fix address typo for INTMSK2 / INTMSKCLR2 registers on sh7780. - Adds IRQ_MODE_IRLnnnn_MASK using intc controller for IRL masking. - Good old IRQ_MODE_IRLnnnn should not register any intc controller. - plat_irq_setup_pins() now selects IRL or IRQ mode. - the holding function is now disabled using ICR0. By default all external pin interrupts are disabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21fb: pvr2fb: Shared IRQ for dreamcast pvr2.Adrian McMenamin
The maple bus driver (http://lkml.org/lkml/2007/9/4/165) uses hardware synchronisation between the maple bus and the VBLANK to poll the maple bus. This patch makes the interrupt shareable. By definition the interrupt is for both devices. Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: remove CONFIG_CPU_HAS_INTC_IRQMagnus Damm
All processor specific interrupt code is now converted to make use of the new intc code. The config option CONFIG_CPU_HAS_INTC_IRQ is because of that pointless. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Fix up heartbeat build and resource size.Paul Mundt
We were abusing the resource size for the number of bits, this has been reworked using proper platform data, so this can be tidied up now. Boards in general only have a 1-byte wide resource, which the ioremap_nocache() case already handles. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: defconfigs for R2D-PLUS and for R2D-1Magnus Damm
This patch removes the old r2d config file named rts7751r2d_defconfig and adds separate config files for the two r2d board versions. The two new defconfigs are identical with the exception of board selection: - rts7751r2dplus_defconfig selects CONFIG_RTS7751R2D_PLUS=y - rts7751r2d1_defconfig selects CONFIG_RTS7751R2D_1=y Please remember to update both files with r2d changes in the future. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Overhaul spinlocks and rwlocks for SH-4A SMP.Paul Mundt
This rips out some of the old spinlock and rwlock behaviour that the SH-2 parts were using and reworks them for LL/SC semantics on the SH-4A. This is primarily only useful for SH-X3 multi-cores, but can also be used for building CONFIG_SMP=y testing kernels on SH-4A UP. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Kill off volatile silliness in sq_flush_range().Paul Mundt
CC arch/sh/kernel/cpu/sh4/sq.o arch/sh/kernel/cpu/sh4/sq.c: In function 'sq_flush_range': arch/sh/kernel/cpu/sh4/sq.c:65: warning: passing argument 1 of 'prefetch' discards qualifiers from pointer target type This didn't actually need to be volatile in the first place, so just kill off the qualifier entirely. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: More license string silliness.Paul Mundt
'GPL v2' vs 'GPLv2'. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: heartbeat driver update.Paul Mundt
Add some flags for the heartbeat driver, and kill off some duplication in the bit positions for the boards that don't have special cases. This also allows for variable access widths and inversion. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - add support for sh7206Magnus Damm
This patch converts the cpu specific interrupt setup code for sh7206 from ipr to intc. New vectors are also added to match the information provided by the datasheet. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - add support for sh7619Magnus Damm
This patch converts the cpu specific interrupt setup code for sh7619 from ipr to intc. New vectors are also added to match the information provided by the datasheet. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: fix irqs for the second serial port on sh7206Magnus Damm
This patch makes sure the serial port interrupt irqs matches the datasheet. Only irqs for SCIF1 are changed. While at some cosmetic spaces are added. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - primary priority masking fixesMagnus Damm
This patch contains various intc fixes for problems reported by Markus Brunner on the linuxsh-dev mailing list: http://marc.info/?l=linuxsh-dev&m=118701948224991&w=1 Apart from added comments, the fixes are: - add intc_set_priority() function prototype to hw_irq.h - fix off-by-one error in intc_set_priority() - make sure _INTC_WIDTH() is set for primary priority masking Big thanks to Markus for finding these problems. Version two fixes a compile error and an inverted primary check. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Markus Brunner <super.firetwister@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - mark data structures as __initdataMagnus Damm
With the intc core improved it is now possible to put the intc data structures in the initdata section. Version two of this patch puts the __initdata inside DECLARE_INTC_DESC() and removes the __initdata included in the board specific r2d code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: x3 - add ipi vectorsMagnus Damm
With the intc dual prio register support in place it is now possible to add the ipi vectors to x3. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: replace sh specific CONFIG_VOYAGERGX with CONFIG_MFD_SM501Magnus Damm
This patch replaces all instances of CONFIG_VOYAGERGX with CONFIG_MFD_SM501. While at it we make sure the r2d code compiles both with and without SM501. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - convert board specific r2d codeMagnus Damm
This patch converts the board specific interrupt code for r2d to make use of intc. While at it we improve the Kconfig to avoid confusion. - Two sets of interrupt tables exist - one for R2D-1 and one for R2D-PLUS. - R2D-1 and R2D-PLUS use the same irq constants. - R2D-1 has AX88796 support, R2D-PLUS does not hook up that IRQ. - R2D-PLUS has KEY support, R2D-1 does not hook up that IRQ. - The number and order of IRQ values are disconnected from register bits. - Interrupt sources now start from IRQ 100. - The machvec demux function converts from irlm IRQ 0-14 to IRQ 100++. Tested on R2D-1 and R2D-PLUS boards. Version 2 adds CONFIG_RTS7751R2D_1 and CONFIG_RTS7751R2D_PLUS together with intc structured as __initdata. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - rework core codeMagnus Damm
This patch reworks the intc core, implementing the following features: - Support dual priority registers - one set and one clear register - All 8/16/32 bit register combinations are now supported - Both single mask and single enable bitmap register are supported - Add code to set interrupt priority - Speedup sense and priority configuration code - Allocate data using bootmem, allows intc data structures to be __initdata - Save memory - allocated memory footprint is smaller than intc structures Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-08 01:03:04 +0000