summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-07-27Merge branch 'for-linus' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan
2009-07-27netxen: update version to 4.0.41Dhananjay Phadke
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27netxen: support for ethtool set ringparamAmit Kumar Salecha
Add support for ethtool -G to tune rx and tx ring sizes per interface basis. This is only supported for NX3031 based cards. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27netxen: add vlan tx acceleration supportDhananjay Phadke
Enable vlan tx acceleration for NX3031 if firmware advertises capability. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27netxen: fix skb alloc size for legacy firmwareDhananjay Phadke
Request 1532 bytes skb data size for NX3031. NX2031 firmware needs 1760 sized buffers. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27netxen: refactor net_device setup codeDhananjay Phadke
Move all net_device initialization into one function netxen_setup_netdev(). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27netxen: clean up firmware version checksDhananjay Phadke
NX2031 firmware version will never be > 4.0.0, so replace (adapter->fw_major < 4) checks with pci revision ID check. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27netxen: Add default and limit macros for ring sizes.Dhananjay Phadke
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27netxen: refactor tso codeDhananjay Phadke
o move all tso / checksum offload code into netxen_tso_check(). o optimize the tso header copy into simple loop. o clean up unnecessary unions from cmd_desc_type0 struct. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27netxen: annotate dma watchdog setupDhananjay Phadke
o remove superfluous code to setup PCI dma watchdog for NX2031. o disable dma watchdog completely for NX3031 (not required). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27netxen: configure interrupt coalesce defaultsDhananjay Phadke
Initialize and configure interrupt coalesing defaults in the firmware, so that these also reflect in "ethool -c". Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27netxen: enable ip addr hashingDhananjay Phadke
NX3031 hardware requires local IP addresses for packet accumulation (LRO). IP address hashing is required to distinguish a local TCP flow from others (forwarded or guest). This patch adds listener for IP and netdev events and configures IP address in the firmware. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27netxen: refresh firmware info after resetDhananjay Phadke
o move dma mask update to netxen_start_firmware() so that if firmware changes across suspend (e.g. file -> flash) it reflects right dma mask. o re-read firmware capabilities after firmware reset. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27mISDN: Fix wrong struct name in macro and clarificationsKarsten Keil
Based on comments from Joe Perches <joe@perches.com>. Thanks. Fix IOFUNC_MEMIO macro. WriteFiFo##name##_MIO use the wrong struct name, this was missed because the macro was only called with this name. Clarify with _func that the defined types are functions. Add names to the parameters for better understanding the purpose. Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27net: fix multiple definitions of setup_w6692Stephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27phonet: phonet_device_get() fixEric Dumazet
net/phonet/pn_dev.c: In function `phonet_device_get': net/phonet/pn_dev.c:99: warning: 'dev' might be used uninitialized in this function Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27trivial: fix typo in ieee802154 documentation and add it to indexThadeu Lima de Souza Cascardo
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
2009-07-26bnx2: Update vlan_featuresEric Dumazet
[PATCH net-next-2.6] bnx2: Update vlan_features In order to get full use of some advanced features of BNX2, we now need to fill dev->vlan_features. Patch successfully tested with vlan devices built on top of bonding. (bond0 : one bnx2 slave, one tg3 slave (not yet vlan_features enabled) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26imwc3200: move iwmc3200 SDIO ids to sdio_ids.hTomas Winkler
1. add intel's sdio vendor id to sdio_ids.h 2. move iwmc3200 sdio devices' ids to sdio_ids.h Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26ethtool: device independent rx_csum and get_flags routinesSridhar Samudrala
This helps avoid error messages with ethtool -k on devices that don't provide device specific routines. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> ------------------------------------------------------------------ Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26bnx2x: Dont update vlan_features in bnx2x_set_tso()Eric Dumazet
Patrick said : "vlan_features doesn't need to be updated, the resulting dev->features of the VLAN device is computed as the intersection of dev->features and dev->vlan_features." Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26net: deprecate print_macJohannes Berg
We've had %pM for long enough now, time to deprecate print_mac() and remove the __maybe_unused attribute from DECLARE_MAC_BUF so that variables declared with that can be found and removed. Otherwise people are putting in new users of print_mac(). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26sky2: remove unnecessary assignmentMike McCormack
Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26phonet: Fix build.David S. Miller
As reported by Oliver Hartkopp: net/phonet/pn_dev.c: In function ‘phonet_init_net’: net/phonet/pn_dev.c:221: error: implicit declaration of function ‘proc_net_fops_create’ net/phonet/pn_dev.c: In function ‘phonet_exit_net’: net/phonet/pn_dev.c:242: error: implicit declaration of function ‘proc_net_remove’ Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-07-26Merge branch 'for_david' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6-net-next
2009-07-26igbvf: resolve "frees DMA memory with different size" warningsAlexander Duyck
This change resolves some warnings seen with DMA debugging enabled in which we were mapping skb->data with size + NET_IP_ALIGN and unmapping it with just size. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: initialize mailbox function pointers prior to phy initAlexander Duyck
The igb driver is currently initializing the mailbox function pointers after the phy. This causes issues as the phy init will return from the function early if there is no phy present. To resolve this I have moved the function pointer init to a location prior to the phy initialization so that serdes based adapters can also make use of SR-IOV. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: cleanup flow control configuration to make requested/current more clearAlexander Duyck
This patch cleans up the flow control configuration for igb to make it a bit more readable in regards to what the requested and current modes are. This should help with the maintainability of the current igb driver in regards to flow control. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: use buffer_info->dma instead of shinfo->nr_frags to determine unmapAlexander Duyck
This change makes it so that we use buffer_info->dma instead of shinfo->nr_frags to determine if we need to unmap a received skb. By doing this we can avoid a cache miss on small packets since the buffer_info structure should already be prefetched. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: add support for 82576 mezzanine cardAlexander Duyck
This patch adds support for a new 82576 mezzanine adapter. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: remove unused switch statement from igb_set_wolAlexander Duyck
There is a switch statement in igb_set_wol that defaults to break and doesn't actually do anything. As such it should be removed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: cleanup receive address register initializationAlexander Duyck
This update cleans up the receive address register initialization. The main purpose of this is to clean out some redundancy that was introduced due to having multiple ways of setting the receive address registers. Instead of having a specialized function to set one register and one to set all of them it makes more sense to just go through the list calling the function that is needed to set the individual registers. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: move all multicast addresses into multicast table arrayAlexander Duyck
This patch moves all of the multicast addresses out of the free Receive address registers and instead programs them all into the multicast table array. As a result the multicast filtering may not be as precise, but it also greatly reduces the overhead for multicast addresses. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: add completion timeout workaround for 82575/82576Alexander Duyck
The 82575 and 82576 hardware can both experience data corruption issues if a pci-e completion arrives after the timeout value. In order to avoid this we need to increase the timeout value while pci-e master is disabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: do not overwrite EEPROM LED settingsAlexander Duyck
The igb driver was overwritting the LED settings that were configured via EEPROM. This is not correct behavior as the LED settings are meant to be configured by EEPROM and not changed. This change removes the code that was setting the LED behavior on the interface. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: change configure_pcs_link to void since it always returns 0Alexander Duyck
Since igb_configure_pcs_link always returns 0 there isn't really much point to checking for the result so it is best just to change this to a void so we can properly ignore the return result. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: make serdes power down available for 82575 in addition to 82576 partsAlexander Duyck
There was a serdes power down workaround that was originally added for 82576 fiber. However it has also been found that this workaround is needed for serdes connections as well. In addition it is also needed for 82575 serdes so we we need to remove the checks restricting it to 82576. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: remove media type fiber as it is misleadingAlexander Duyck
The current igb driver only supports copper and serdes. The fiber media type is a holdover from earlier NICs as the current nics supported by igb all use serdes when communicating over a fiber connection. As a result we can remove media type fiber without losing any functionality. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-25mISDN: hfcmulti display real PCI ids for not supported cardsKarsten Keil
In the PCI probe function struct pci_device_id points to the matched entry of the ID table, but for devices which are matched with PCI_ANY_ID sub IDs we want display the IDs of the device itself. Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25ISDN: ARRAY_SIZE changesKarsten Keil
These changes were a direct result of using a semantic patch More information can be found at http://www.emn.fr/x-info/coccinelle/ Modified some of the changes to avoid the extra define. Signed-off-by: Stoyan Gaydarov <sgayda2@uiuc.edu> Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25drivers/isdn: Drop unnecessary NULL testJulia Lawall
The result of container_of should not be NULL. In particular, in this case the argument to the enclosing function has passed though INIT_WORK, which dereferences it, implying that its container cannot be NULL. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ identifier fn,work,x,fld; type T; expression E1,E2; statement S; @@ static fn(struct work_struct *work) { ... when != work = E1 x = container_of(work,T,fld) ... when != x = E2 - if (x == NULL) S ... } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25mISDN: Add support for Traverse Technologies NETJet PCI cardsKarsten Keil
Add support for cards based on the Tiger 300 and Tiger 320 ISDN PCI chip. Currently only the ISAC ISDN line interface is supported. Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25mISDN: Add driver for Winbond cardsKarsten Keil
Add driver for Winbond W6692 based PCI cards. Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25mISDN: Add support for Speedfax+ cardsKarsten Keil
Add support for the Siemens ISAR DSP chip and cards based on it, including analog modem protocols. Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25mISDN: Driver for AVM Fritz!CARD PCIKarsten Keil
Add mISDN driver for AVM FRITZ!CARD PCI (all versions). Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25mISDN: Add driver for Infineon ISDN chipset familyKarsten Keil
This driver supports cards with Infineon ISAC/HSCX, ISACX, IPAC and IPACX chips from various manufacturers. Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25mISDN: Make clearing B-channel a common functionKarsten Keil
Clearing B-channel is needed in every driver, so it makes sense to have it as common function. Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25ISDN: Fix isdnhdlc for one byte hdlc packetsKarsten Keil
Normally HDLC packets contain more as one byte (e.g a X25/X75 header). But if you use plain HDLC framing, the current code do not encode 1 byte payloads, this patch fix that. Signed-off-by: Karsten Keil <keil@b1-systems.de>
2009-07-25ISDN: Add support for none reverse bitstreams to isdnhdcKarsten Keil
The original isdnhdlc code was developed for devices which had reversed bitorder in the byte stream. Adding code to handle normal bitstreams as well. Signed-off-by: Karsten Keil <keil@b1-systems.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-15 01:28:30 +0000