summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-03-19Linux 2.6.16v2.6.16Linus Torvalds
2006-03-19[PATCH] Remove obsolete CREDITS addressAndrea Arcangeli
This address is going to be obsolete, so I should update it.
2006-03-19Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] SB1: Check for -mno-sched-prolog if building corelis debug kernel. [MIPS] Sibyte: Fix race in sb1250_gettimeoffset(). [MIPS] Sibyte: Fix interrupt timer off by one bug. [MIPS] Sibyte: Fix M_SCD_TIMER_INIT and M_SCD_TIMER_CNT wrong field width. [MIPS] Protect more of timer_interrupt() by xtime_lock. [MIPS] Work around bad code generation for <asm/io.h>. [MIPS] Simple patch to power off DBAU1200 [MIPS] Fix DBAu1550 software power off. [MIPS] local_r4k_flush_cache_page fix [MIPS] SB1: Fix interrupt disable hazard. [MIPS] Get rid of the IP22-specific code in arclib. Update MAINTAINERS entry for MIPS.
2006-03-19[TG3]: 40-bit DMA workaround part 2Michael Chan
The 40-bit DMA workaround recently implemented for 5714, 5715, and 5780 needs to be expanded because there may be other tg3 devices behind the EPB Express to PCIX bridge in the 5780 class device. For example, some 4-port card or mother board designs have 5704 behind the 5714. All devices behind the EPB require the 40-bit DMA workaround. Thanks to Chris Elmquist again for reporting the problem and testing the patch. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-19[AX.25]: Fix potencial memory hole.Ralf Baechle DL5RB
If the AX.25 dialect chosen by the sysadmin is set to DAMA master / 3 (or DAMA slave / 2, if CONFIG_AX25_DAMA_SLAVE=n) ax25_kick() will fall through the switch statement without calling ax25_send_iframe() or any other function that would eventually free skbn thus leaking the packet. Fix by restricting the sysctl inferface to allow only actually supported AX.25 dialects. The system administration mistake needed for this to happen is rather unlikely, so this is an uncritical hole. Coverity #651. Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-18[PATCH] Kconfig: swap VIDEO_CX88_ALSA and VIDEO_CX88_DVBMichael Krufky
VIDEO_CX88_ALSA should not be between VIDEO_CX88_DVB and VIDEO_CX88_DVB_ALL_FRONTENDS When cx88-alsa was added to cx88/Kconfig, it was added in between VIDEO_CX88_DVB and VIDEO_CX88_DVB_ALL_FRONTENDS. This caused undesireable effects to the appearance of the menu options in menuconfig. This fix reorders cx88-alsa and cx88-dvb in Kconfig, to match saa7134, and restore the correct menuconfig appearance. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-18[PATCH] Fixed em28xx based system lockupMarkus Rechberger
Fixed em28xx based system lockup, device needs to be initialized before starting the isoc transfer otherwise the system will completly lock up. Signed-off-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-18[PATCH] disable unshare(CLONE_VM) for nowOleg Nesterov
sys_unshare() does mmput(new_mm). This is not enough if we have mm->core_waiters. This patch is a temporary fix for soon to be released 2.6.16. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> [ Checked with Uli: "I'm not planning to use unshare(CLONE_VM). It's not needed for any functionality planned so far. What we (as in Red Hat) need unshare() for now is the filesystem side." ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-18[MIPS] SB1: Check for -mno-sched-prolog if building corelis debug kernel.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-18[MIPS] Sibyte: Fix race in sb1250_gettimeoffset().Ralf Baechle
From Dave Johnson <djohnson+linuxmips@sw.starentnetworks.com>: sb1250_gettimeoffset() simply reads the current cpu 0 timer remaining value, however once this counter reaches 0 and the interrupt is raised, it immediately resets and begins to count down again. If sb1250_gettimeoffset() is called on cpu 1 via do_gettimeofday() after the timer has reset but prior to cpu 0 processing the interrupt and taking write_seqlock() in timer_interrupt() it will return a full value (or close to it) causing time to jump backwards 1ms. Once cpu 0 handles the interrupt and timer_interrupt() gets far enough along it will jump forward 1ms. Fix this problem by implementing mips_hpt_*() on sb1250 using a spare timer unrelated to the existing periodic interrupt timers. It runs at 1Mhz with a full 23bit counter. This eliminated the custom do_gettimeoffset() for sb1250 and allowed use of the generic fixed_rate_gettimeoffset() using mips_hpt_*() and timerhi/timerlo. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-18[MIPS] Sibyte: Fix interrupt timer off by one bug.Ralf Baechle
From Dave Johnson <djohnson+linuxmips@sw.starentnetworks.com>: The timers need to be loaded with 1 less than the desired interval not the interval itself. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-18[MIPS] Sibyte: Fix M_SCD_TIMER_INIT and M_SCD_TIMER_CNT wrong field width.Ralf Baechle
From Dave Johnson <djohnson+linuxmips@sw.starentnetworks.com>: Field width should be 23 bits not 20 bits. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-18[MIPS] Protect more of timer_interrupt() by xtime_lock.Ralf Baechle
From Dave Johnson <djohnson+linuxmips@sw.starentnetworks.com>: * do_timer() expects the arch-specific handler to take the lock as it modifies jiffies[_64] and xtime. * writing timerhi/lo in timer_interrupt() will mess up fixed_rate_gettimeoffset() which reads timerhi/lo. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-18[MIPS] Work around bad code generation for <asm/io.h>.Ralf Baechle
If a call to set_io_port_base() was being followed by usage of mips_io_port_base in the same function gcc was possibly using the old value due to some clever abuse of const. Adding a barrier will keep the optimization and result in correct code with latest gcc. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-18[MIPS] Simple patch to power off DBAU1200Matej Kupljen
Signed-off-by: Matej Kupljen <matej.kupljen@ultra.si> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-18[MIPS] Fix DBAu1550 software power off.Sergei Shtylylov
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-18[MIPS] local_r4k_flush_cache_page fixAtsushi Nemoto
If dcache_size != icache_size or dcache_size != scache_size, or set-associative cache, icache/scache does not flushed properly. Make blast_?cache_page_indexed() masks its index value correctly. Also, use physical address for physically indexed pcache/scache. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-18[MIPS] SB1: Fix interrupt disable hazard.Ralf Baechle
The SB1 core has a three cycle interrupt disable hazard but we were wrongly treating it as fully interlocked. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-18[MIPS] Get rid of the IP22-specific code in arclib.Ralf Baechle
This breaks the kernel build if sgiwd93 was configured as a module. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-18Update MAINTAINERS entry for MIPS.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-17[NET]: Fix race condition in sk_wait_event().Alexey Kuznetsov
It is broken, the condition is checked out of socket lock. It is wonderful the bug survived for so long time. [ This fixes bugzilla #6233: race condition in tcp_sendmsg when connection became established ] Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-17[PATCH] fix free swap cache latencyHugh Dickins
Lee Revell reported 28ms latency when process with lots of swapped memory exits. 2.6.15 introduced a latency regression when unmapping: in accounting the zap_work latency breaker, pte_none counted 1, pte_present PAGE_SIZE, but a swap entry counted nothing at all. We think of pages present as the slow case, but Lee's trace shows that free_swap_and_cache's radix tree lookup can make a lot of work - and we could have been doing it many thousands of times without a latency break. Move the zap_work update up to account swap entries like pages present. This does account non-linear pte_file entries, and unmap_mapping_range skipping over swap entries, by the same amount even though they're quick: but neither of those cases deserves complicating the code (and they're treated no worse than they were in 2.6.14). Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-17[PATCH] kbuild: fix buffer overflow in modpostSam Ravnborg
Jiri Benc <jbenc@suse.cz> reported that modpost would stop with SIGABRT if used with long filepaths. The error looked like: > Building modules, stage 2. > MODPOST > *** glibc detected *** scripts/mod/modpost: realloc(): invalid next size: +0x0809f588 *** > [...] Fix this by allocating at least the required memory + SZ bytes each time. Before we sometimes ended up allocating too little memory resuting in the glibc detected bug above. Based on patch originally submitted by: Jiri Benc <jbenc@suse.cz> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-17[PATCH] nfsservctl(): remove user-triggerable printkPeter Staubach
A user can use nfsservctl() to spam the logs. This can happen because the arguments to the nfsservctl() system call are versioned. This is a good thing. However, when a bad version is detected, the kernel prints a message and then returns an error. Signed-off-by: Peter Staubach <staubach@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-17[PATCH] fix race in pagevec_strip?Christoph Lameter
We can call try_to_release_page() with PagePrivate off and a valid page->mapping This may cause all sorts of trouble for the filesystem *_releasepage() handlers. XFS bombs out in that case. Lock the page before checking for page private. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-17[PATCH] dm stripe: Fix boundsKevin Corry
The dm-stripe target currently does not enforce that the size of a stripe device be a multiple of the chunk-size. Under certain conditions, this can lead to I/O requests going off the end of an underlying device. This test-case shows one example. echo "0 100 linear /dev/hdb1 0" | dmsetup create linear0 echo "0 100 linear /dev/hdb1 100" | dmsetup create linear1 echo "0 200 striped 2 32 /dev/mapper/linear0 0 /dev/mapper/linear1 0" | \ dmsetup create stripe0 dd if=/dev/zero of=/dev/mapper/stripe0 bs=1k This will produce the output: dd: writing '/dev/mapper/stripe0': Input/output error 97+0 records in 96+0 records out And in the kernel log will be: attempt to access beyond end of device dm-0: rw=0, want=104, limit=100 The patch will check that the table size is a multiple of the stripe chunk-size when the table is created, which will prevent the above striped device from being created. This should not affect tools like LVM or EVMS, since in all the cases I can think of, striped devices are always created with the sizes being a multiple of the chunk-size. The size of a stripe device must be a multiple of its chunk-size. (akpm: that typecast is quite gratuitous) Signed-off-by: Kevin Corry <kevcorry@us.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-17[PATCH] x86: check for online cpus before bringing them upSrivatsa Vaddagiri
Bryce reported a bug wherein offlining CPU0 (on x86 box) and then subsequently onlining it resulted in a lockup. On x86, CPU0 is never offlined. The subsequent attempt to online CPU0 doesn't take that into account. It actually tries to bootup the already booted CPU. Following patch fixes the problem (as acknowledged by Bryce). Please consider for inclusion in 2.6.16. Check if cpu is already online. Signed-off-by: Srivatsa Vaddagiri <vatsa@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-17[PATCH] v9fs: fix overzealous dropping of dentry which breaks dcacheEric Van Hensbergen
There is a d_drop in dir_release which caused problems as it invalidates dcache entries too soon. This was likely a part of the wierd cwd behavior folks were seeing. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-17[PATCH] posix-timers: fix requeue accounting when signal is ignoredRoman Zippel
When the posix-timer signal is ignored then the timer is rearmed by the callback function. The requeue pending accounting has to be fixed up else the state might be wrong. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-17[PATCH] time_interpolator: add __read_mostlyChristoph Lameter
The pointer to the current time interpolator and the current list of time interpolators are typically only changed during bootup. Adding __read_mostly takes them away from possibly hot cachelines. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-17[PATCH] page migration: Fail with error if swap not setupChristoph Lameter
Currently the migration of anonymous pages will silently fail if no swap is setup. This patch makes page migration functions check for available swap and fail with -ENODEV if no swap space is available. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-17[PATCH] unshare: Use rcu_assign_pointer when setting sighandEric W. Biederman
The sighand pointer only needs the rcu_read_lock on the read side. So only depending on task_lock protection when setting this pointer is not enough. We also need a memory barrier to ensure the initialization is seen first. Use rcu_assign_pointer as it does this for us, and clearly documents that we are setting an rcu readable pointer. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-16[netdrvr] fix array overflows in Chelsio driverScott Bardone
Adrian Bunk wrote: > The Coverity checker spotted the following two array overflows in > drivers/net/chelsio/sge.c (in both cases, the arrays contain 3 > elements): [snip] This is a bug. The array should contain 2 elements. Here is the fix. Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-16[PATCH] e1000 endianness bugsDavid S. Miller
return -E_NO_BIG_ENDIAN_TESTING; [E1000]: Fix 4 missed endianness conversions on RX descriptor fields. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-16Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2006-03-16Merge branch 'e100-fixes' of git://198.78.49.142/~jbrandeb/linux-2.6Jeff Garzik
2006-03-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge: powerpc: update defconfigs [PATCH] powerpc: properly configure DDR/P5IOC children devs [PATCH] powerpc: remove duplicate EXPORT_SYMBOLS [PATCH] powerpc: RTC memory corruption [PATCH] powerpc: enable NAP only on cpus who support it to avoid memory corruption [PATCH] powerpc: Clarify wording for CRASH_DUMP Kconfig option [PATCH] powerpc/64: enable CONFIG_BLK_DEV_SL82C105 [PATCH] powerpc: correct cacheflush loop in zImage powerpc: Fix problem with time going backwards powerpc: Disallow lparcfg being a module
2006-03-16powerpc: update defconfigsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16[PATCH] powerpc: properly configure DDR/P5IOC children devsJohn Rose
The dynamic add path for PCI Host Bridges can fail to configure children adapters under P5IOC controllers. It fails to properly fixup bus/device resources, and it fails to properly enable EEH. Both of these steps need to occur before any children devices are enabled in pci_bus_add_devices(). Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16[PATCH] powerpc: remove duplicate EXPORT_SYMBOLSOlaf Hering
remove warnings when building a 64bit kernel. smp_call_function triggers also with 32bit kernel. WARNING: vmlinux: duplicate symbol 'smp_call_function' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:164:EXPORT_SYMBOL(smp_call_function); arch/powerpc/kernel/smp.c:300:EXPORT_SYMBOL(smp_call_function); WARNING: vmlinux: duplicate symbol 'ioremap' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:113:EXPORT_SYMBOL(ioremap); arch/powerpc/mm/pgtable_64.c:321:EXPORT_SYMBOL(ioremap); WARNING: vmlinux: duplicate symbol '__ioremap' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:117:EXPORT_SYMBOL(__ioremap); arch/powerpc/mm/pgtable_64.c:322:EXPORT_SYMBOL(__ioremap); WARNING: vmlinux: duplicate symbol 'iounmap' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:118:EXPORT_SYMBOL(iounmap); arch/powerpc/mm/pgtable_64.c:323:EXPORT_SYMBOL(iounmap); Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16[PATCH] powerpc: RTC memory corruptionMichael Neuling
We should be memset'ing the data we are pointing to, not the pointer itself. This is in an error path so we probably don't hit it much. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16[PATCH] powerpc: enable NAP only on cpus who support it to avoid memory ↵Benjamin Herrenschmidt
corruption This patch fixes incorrect setting of powersave_nap to 1 on all PowerMacs, potentially causing memory corruption on some models. This bug was introuced by me during the 32/64 bits merge. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16[PATCH] powerpc: Clarify wording for CRASH_DUMP Kconfig optionMichael Ellerman
The wording of the CRASH_DUMP Kconfig option is not very clear. It gives you a kernel that can be used _as_ the kdump kernel, not a kernel that can boot into a kdump kernel. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16[PATCH] powerpc/64: enable CONFIG_BLK_DEV_SL82C105Olaf Hering
Enable the onboard IDE driver for p610, p615 and p630. They have the CD connected to this card. All other RS/6000 systems with this controller have no connectors and dont need this option. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16[PATCH] powerpc: correct cacheflush loop in zImageOlaf Hering
Correct the loop for cacheflush. No idea where I copied the code from, but the original does not work correct. Maybe the flush is not needed. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16powerpc: Fix problem with time going backwardsPaul Mackerras
The recent changes to keep gettimeofday in sync with xtime had the side effect that it was occasionally possible for the time reported by gettimeofday to go back by a microsecond. There were two reasons: (1) when we recalculated the offsets used by gettimeofday every 2^31 timebase ticks, we lost an accumulated fractional microsecond, and (2) because the update is done some time after the notional start of jiffy, if ntp is slowing the clock, it is possible to see time go backwards when the timebase factor gets reduced. This fixes it by (a) slowing the gettimeofday clock by about 1us in 2^31 timebase ticks (a factor of less than 1 in 3.7 million), and (b) adjusting the timebase offsets in the rare case that the gettimeofday result could possibly go backwards (i.e. when ntp is slowing the clock and the timer interrupt is late). In this case the adjustment will reduce to zero eventually because of (a). Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-15Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3362/1: [cleanup] - duplicate decleration of mem_fclk_21285 [ARM] 3365/1: [cleanup] header for compat.c exported functions [ARM] 3364/1: [cleanup] warning fix - definitions for enable_hlt and disable_hlt [ARM] 3363/1: [cleanup] process.c - fix warnings [ARM] 3358/1: [S3C2410] add missing SPI DMA resources [ARM] 3357/1: enable frontlight on collie [ARM] Fix "thead" typo
2006-03-15[PATCH] Fix ext2 readdir f_pos re-validation logicAl Viro
This fixes not one, but _two_, silly (but admittedly hard to hit) bugs in the ext2 filesystem "readdir()" function. It also cleans up the code to avoid the unnecessary goto mess. The bugs were related to re-valiating the f_pos value after somebody had either done an "lseek()" on the directory to an invalid offset, or when the offset had become invalid due to a file being unlinked in the directory. The code would not only set the f_version too eagerly, it would also not update f_pos appropriately for when the offset fixup took place. When that happened, we'd occasionally subsequently fail the readdir() even when we shouldn't (no real harm done, but an ugly printk, and obviously you would end up not necessarily seeing all entries). Thanks to Masoud Sharbiani <masouds@google.com> who noticed the problem and had a test-case for it, and also fixed up a thinko in the first version of this patch. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Masoud Sharbiani <masouds@google.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-15[ARM] 3362/1: [cleanup] - duplicate decleration of mem_fclk_21285Ben Dooks
Patch from Ben Dooks arch/arm/kernel/setup.c declares mem_fclk_21285 when this is already declared in include/asm-arm/system.h Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-15[ARM] 3365/1: [cleanup] header for compat.c exported functionsBen Dooks
Patch from Ben Dooks arch/arm/kernel/compat.c exports two functions, convert_to_tag_list and squash_mem_tags which are not defined in any header files, and not used outside arch/arm/kernel. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>