Age | Commit message (Collapse) | Author |
|
The new TPS61160A part asks for the control PWM signal to be between
5kHZ and 100kHz. This change sets clk_div to 0x1D for a 5kHz signal.
This change also installs a linear table for
enterprise_bl_output_measured_a03.
Bug 956246
Reviewed-on: http://git-master/r/91606
(cherry picked from commit 32a67cf7b1c8223abe8de7d88b4bcd1906cda0a2)
Change-Id: Ic7907cfae6f918ef055add33615822ef8c5e0ec6
Signed-off-by: Tom Cherry <tcherry@nvidia.com>
Reviewed-on: http://git-master/r/93051
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Need to include A01 board for emc scaling.
Bug 957981
Reviewed-on: http://git-master/r/91877
(cherry picked from commit 2dff127a133056b4229b8d7a4e8328959873f3c8)
Change-Id: I9c615b13adf4375ee0742b817361b0d6326afccd
Signed-off-by: Tom Cherry <tcherry@nvidia.com>
Reviewed-on: http://git-master/r/93050
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
WAR to enable console prints when console service is not started
for port type TEGRA.
Bug 958959
Change-Id: I51e582d16195171f1f8bae9324e2ddece4638281
Signed-off-by: Pradeep Kumar <pgoudagunta@nvidia.com>
Reviewed-on: http://git-master/r/92814
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Joshua Cha <joshuac@nvidia.com>
Tested-by: Joshua Cha <joshuac@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
|
|
Bug 939799
Reviewed-on: http://git-master/r/90824
(cherry-picked from commit 8c556f816196c17e059db2c11b966ca89848efa3)
Change-Id: I67b26958862b8b60217c2750fe0b2eef3013d9b3
Signed-off-by: Tom Cherry <tcherry@nvidia.com>
Reviewed-on: http://git-master/r/92409
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Adding the suspend_fail flag to proprogate the
bus suspend failure to the ehci suspend. This
ensure the proper synchronization between two
suspend calls.
Bug 932020
Reviewed-on: http://git-master/r/92286
(cherry picked from commit 9548deb7f4dfda95067731744b3122a47be3f654)
Change-Id: I00cc062888fcf7085be7aa3556ae500e0e457cd1
Reviewed-on: http://git-master/r/93130
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
fix i2s for BT Sco.
Bug 936626
Change-Id: Iaf1d1a230fcb37d45d9deaaf1dae780f5870e99f
Signed-off-by: Manoj Gangwal <mgangwal@nvidia.com>
Reviewed-on: http://git-master/r/92860
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Rakesh Goyal <rgoyal@nvidia.com>
Reviewed-by: Sumit Bhattacharya <sumitb@nvidia.com>
Reviewed-by: Scott Peterson <speterson@nvidia.com>
|
|
bug 949219
Change-Id: I8abd1e837a774d15aef25ec8c40b857b8cba0426
Signed-off-by: Sanjay Singh Rawat <srawat@nvidia.com>
Reviewed-on: http://git-master/r/92858
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Modified multiple if conditions to switch case.
Included a new OTG state case: undefined
Change-Id: Iba4cf1a79b8c220fc873966bd8a89f43a5648863
Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Reviewed-on: http://git-master/r/92832
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
With this patch:
1. Renamed structure and function names to be more meaningful.
2. Removed unnecessary local variables.
Change-Id: I0684d840c1b8c606c1643e1e2517e083be825787
Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Reviewed-on: http://git-master/r/92817
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
+ Enable uart4 and remove spi4
+ use SPI2 instead of SPI1 as initial pinmux for gpio x5/6
bug 933971
Reviewed-on: http://git-master/r/78718
(cherry picked from commit 7135fbe5edf7357384dc92b613ea46dc927d6b06)
Change-Id: I46d3072dd160d7a2d1f11f949cc934fbdff1e0a6
Reviewed-on: http://git-master/r/91234
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Remove old overlay interface, it is replaced with TEGRA_DC_EXTENSIONS
External functions made static now that overlay.c no longer needs them.
Change-Id: I5d080ceb19ad90d3b5cc4bf20494c967687293a5
Signed-off-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-on: http://git-master/r/92661
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Chao Xu <cxu@nvidia.com>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Kevin Huang (Eng-SW) <kevinh@nvidia.com>
Reviewed-by: Dan Willemsen <dwillemsen@nvidia.com>
Reviewed-by: Michael I Gold <gold@nvidia.com>
Reviewed-by: Markus Holtmanns <mholtmanns@nvidia.com>
|
|
bug 949219
Change-Id: I56904b3607c92281076ae3245ee1071922763eb8
Signed-off-by: Sanjay Singh Rawat <srawat@nvidia.com>
Reviewed-on: http://git-master/r/92557
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Tested-by: Gerrit_Virtual_Submit
|
|
The slave address of device to be configured in packet
header as follows:
7 bit address: PacketHeader3[7:1]
10 bit address: PacketHeader3[9:0]
Fixing the code to make packet header3 properly.
Change-Id: I1797066d23ada5d4d7b14710201a1fb17566b78b
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/92556
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Andy Carman <acarman@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
|
|
Removing interrupt key driver as this duplicates the
gpio_keys driver. Desired functionality can be achieve
through the gpio_keys.
Change-Id: I7e5bc18d4b30c64fa08bb64cdceffe2193c43c8f
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/92462
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
|
|
Remove config variable CONFIG_KEYBOARD_INTERRUPT as same
functionality can be achieve through the gpio_keys.
Change-Id: Ice898c9abe9f4eba2e82459b22f309cb36347123
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/92461
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
gpio_keys driver support for the key which can generates only
interrupt and not mapped to any gpio functionality.
Using this feature to support the onkey which generates interrupt
only when key is pressed.
Change-Id: I502a45a1c510b92f4114ded713f7706b7a2c85d3
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/92460
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
|
|
bug 949219
Change-Id: I66acbd911c5ba1162271e672cfadef099eeb58a9
Signed-off-by: Sanjay Singh Rawat <srawat@nvidia.com>
Reviewed-on: http://git-master/r/92309
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Tested-by: Gerrit_Virtual_Submit
|
|
Adding support for E1198-A03 which have different regulators
and the identification of regulators are done based on board
sku id.
Change-Id: Iee76d2bc493308da5346011232db32b933fd8625
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/92284
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
Remove the check and debug dump for cases where we compare against
an old syncpt value. Also removes an extra check that is already done
by wait_event_interruptible_timeout();
Bug 941327
Change-Id: Icbaf70b04a8bd070c3fdd3467b981de11219d2b9
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/92283
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>
|
|
Refactor page pool code.
Add page pool support for all memory types.
Add support to enable/disable page pools.
Add support to allow configuring page pool size.
Change-Id: I07c79004542efdd5909547928b3aa5d470e38909
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-on: http://git-master/r/91914
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
|
|
This patch fixes the GetStatus always reports self powered.
As per USB compliance update, a device that is actively drawing
more than 100mA from USB must report itself as bus-powered in
the GetStatus(DEVICE) call.
Bug 928340
Change-Id: Iefd1577a2ff2f301add98b14a402ed8eacc3aa28
Signed-off-by: ahcheng <ahcheng@nvidia.com>
Reviewed-on: http://git-master/r/91404
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
Make the module space a configurable option.
The default value remains 16. The main goal
of this CL is to enable large module, such as
resman module of nvidia.
Change-Id: I8a775a6a23c1a75562917d8ab8e4bbe29f08d7e5
Signed-off-by: Mursalin Akon <makon@nvidia.com>
(cherry picked from commit 40aaad75bd32822137033fc7972d41ee30ff7bc9)
Reviewed-on: http://git-master/r/91322
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Eric Brower <ebrower@nvidia.com>
Reviewed-by: Allen Martin <amartin@nvidia.com>
|
|
This patch add CFI version 1.5 support. It replaces
classic word programming by write buffer programming
and sets the FFS write size to 512 bytes.
The patch taken from spansion
bug 906309
Reviewed-on: http://git-master/r/89412
(cherry picked from commit 733c7ef4b9bdc52ac95095436a5cf83aa0296da5)
Change-Id: I63cbd0bad077e055d6efd4e2b4c7d26c608d1b66
Signed-off-by: Manoj Chourasia <mchourasia@nvidia.com>
Reviewed-on: http://git-master/r/91307
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Amlan Kundu <akundu@nvidia.com>
Reviewed-by: Varun Wadekar <vwadekar@nvidia.com>
|
|
Initialize pm_caps and pm_flags through platform
data.
Bug 956238
Change-Id: I400f6e92541fa2e63ccc7f829e204d5eef4697fc
Signed-off-by: Mursalin Akon <makon@nvidia.com>
Reviewed-on: http://git-master/r/90790
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Gerrit_Virtual_Submit
Reviewed-by: Allen Martin <amartin@nvidia.com>
|
|
Add ID of BCM4330 to supported chips.
Remove ID of BCM4329 as it is not supported.
Bug 956238
Change-Id: I5c9e809245161d76c3decab3e5252ce111a2a07d
Signed-off-by: Mursalin Akon <makon@nvidia.com>
Reviewed-on: http://git-master/r/90657
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Gerrit_Virtual_Submit
Reviewed-by: Allen Martin <amartin@nvidia.com>
|
|
Fix Synaptics touchpad GPIO setup compilation warning and add freeing of
resources when unconfiguring.
Change-Id: Idc98dd622cc969ac55f8c6a945317d657a6b7222
Signed-off-by: Juha Tukkinen <jtukkinen@nvidia.com>
Reviewed-on: http://git-master/r/90046
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
Observed interrupt not getting enabled properly.
hence fixing it.
bug 937221
Change-Id: If852c9cd40fc98711fe12a124b533ee8ee99eb3c
Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Reviewed-on: http://git-master/r/83992
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
- if user space does not open 3d channel, 3d scaling
algorithm is not initialized. so return safely when
3d scaling is disabled
- also do not call nvhost_module_suspend() explicitly
for host1x client modules. nvhost_channel_suspend()
takes care to suspend the module if ref count = 0
- call nvhost_module_suspend() only for host1x device
as it does not use actual hardware channel
Bug 953451
Change-Id: Iba2b771b71d9b41c8ed978112566181872c56259
Signed-off-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
Reviewed-on: http://git-master/r/92506
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Peer Chen <pchen@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Emily Jiang <ejiang@nvidia.com>
|
|
Few boards which uses wm8903 has independent regulators
for spk and mic while others do not have it.
For the boards which do not have independent regulators
we should avoid getting their regulators otherwise we
would get the following error messages:
"tegra-snd-wm8903 tegra-snd-wm8903.0: No speaker regulator found"
"tegra-snd-wm8903 tegra-snd-wm8903.0: No digital mic regulator found"
Bug 956562
Signed-off-by: Preetham Chandru <pchandru@nvidia.com>
Change-Id: Ide1ce141b5d45d56e834dc82a7cf5a7adc6c3e80
Reviewed-on: http://git-master/r/91548
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
Print only a warning message if usb_bat_chg regulator is not registered.
Some boards do not support usb charging and for such boards
usb_bat_chg regulator will not be registered.
Hence print only a warning message in such cases.
Bug 956558
Signed-off-by: Preetham Chandru <pchandru@nvidia.com>
Change-Id: I64c727f122c09d3865d649f3529b053bc65615ad
Reviewed-on: http://git-master/r/91521
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Rakesh Bodla <rbodla@nvidia.com>
Reviewed-by: Syed Rafiuddin <srafiuddin@nvidia.com>
Reviewed-by: Suresh Mangipudi <smangipudi@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
|
|
1. disable read write operation while suspend/resume
noirq operation is performed to avoid hang
2. implement dev pm_ops for pcie tegra driver
3. use a backup buffer to save config space of
all pcie devices to avoid legacy PM calls.
Change-Id: I2d39f69a865b48e1e51ce2cd466e24007718a8b6
Signed-off-by: Jay Agarwal <jagarwal@nvidia.com>
Reviewed-on: http://git-master/r/90617
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Penny Chiu <pchiu@nvidia.com>
Reviewed-by: Varun Wadekar <vwadekar@nvidia.com>
Reviewed-by: Krishna Thota <kthota@nvidia.com>
Reviewed-by: Emily Jiang <ejiang@nvidia.com>
|
|
1. disable pci devices asynchronous suspend/resume.
2. correct resume function of tegra pcie driver.
3. enable clock clamping
4. require noirq suspend/resume calls to be commented
Bug 790141
Bug 947673
Change-Id: I49ebba43f296c3c38bc960d7db5fe847232e29a8
Signed-off-by: Jay Agarwal <jagarwal@nvidia.com>
Reviewed-on: http://git-master/r/87316
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Tested-by: Penny Chiu <pchiu@nvidia.com>
Reviewed-by: Varun Wadekar <vwadekar@nvidia.com>
Reviewed-by: Krishna Thota <kthota@nvidia.com>
|
|
bug 947710
Change-Id: If06de72d3880055c219e5ded892bb8cf956d774a
Signed-off-by: Frederic Bossy <fbossy@nvidia.com>
Reviewed-on: http://git-master/r/92066
Reviewed-by: Steve Lin <stlin@nvidia.com>
Reviewed-by: Dan Willemsen <dwillemsen@nvidia.com>
|
|
Bug 953155
Change-Id: I9fbb87f17e590971d5a0bf313e740e8b3b4c890b
Signed-off-by: Kevin Huang <kevinh@nvidia.com>
Reviewed-on: http://git-master/r/91871
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Enable speculative line fill in SCU.
Bug 947861
Change-Id: I2db7515c47715160a4e559931e178b41c01a1744
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-on: http://git-master/r/91834
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Scott Williams <scwilliams@nvidia.com>
|
|
No apparent need for L4T
Bug 956238
Change-Id: I78b7451a1bf30cce974f1daad88ae27959d55340
Signed-off-by: Mursalin Akon <makon@nvidia.com>
Reviewed-on: http://git-master/r/90672
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
rename bcmsdh_remove & bcmsdh_probe to *_bcmdhd
to resolve symbol conflicts with bcm4329 driver.
Bug 956238
Change-Id: I750238ddf9b3a0d9ff9583a7ec456aceef28531c
Signed-off-by: Mursalin Akon <makon@nvidia.com>
Reviewed-on: http://git-master/r/90656
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Gerrit_Virtual_Submit
Reviewed-by: Rakesh Kumar <krakesh@nvidia.com>
Reviewed-by: Allen Martin <amartin@nvidia.com>
|
|
This change adds a flag to flip windows in cursor mode. Cursor mode
will cause flips to be skipped over if there are newer flip requests
waiting in the workqueue.
Add CURSOR_MODE to caps bitfield.
bug 942762
Change-Id: Ib52a0a5565f961cdd9650e4204cd65b86f96fee1
Signed-off-by: Adam Cheney <acheney@nvidia.com>
Reviewed-on: http://git-master/r/90418
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Robert Morell <rmorell@nvidia.com>
|
|
enable OutOfBand interrupt support in bcm4329 driver.
Bug 959909
Change-Id: I2e39eed38e2574c106dd0c43f5a940ced2af1d09
Signed-off-by: Narayan Reddy <narayanr@nvidia.com>
Reviewed-on: http://git-master/r/92326
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Rakesh Kumar <krakesh@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Changing the values of registers timing0 and timing1 of NOR flash
to those specified in the NOR POR.
Bug 914158.
Change-Id: Ie65fadbeda7329b22786841f46dd2583043a8381
Reviewed-on: http://git-master/r/#change,72828
Reviewed-on: http://git-master/r/91737
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Vishal Singh <vissingh@nvidia.com>
Reviewed-by: Manoj Chourasia <mchourasia@nvidia.com>
Reviewed-by: Varun Wadekar <vwadekar@nvidia.com>
|
|
ARM_SAVE_DEBUG_CONTEXT was getting selected by tegra3 independent
of PM_SLEEP config. ARM_SAVE_DEBUG_CONTEXT itself is dependent on
PM_SLEEP. That was generating following warning while doing
savedefconfig with PM_SLEEP disabled.
scripts/kconfig/conf --savedefconfig=defconfig Kconfig
warning: (ARCH_TEGRA_2x_SOC && ARCH_TEGRA_3x_SOC) selects \
ARM_SAVE_DEBUG_CONTEXT which has unmet direct dependencies\
(PM_SLEEP && CPU_V7)
This patch fixes the issue.
bug 931053
Change-Id: I57016476b7ca39f9ac36a9c59d0102c89c85c6c9
Signed-off-by: Manoj Chourasia <mchourasia@nvidia.com>
Reviewed-on: http://git-master/r/91461
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
Some of buttons, like power-on key or onkey, may only generate interrupts
when pressed and not actually be mapped as gpio in the system. Allow
setting gpio to invalid value and specify IRQ instead to support such
keys. The debounce timer is used not to debounce but to ignore new IRQs
coming while button is kept pressed.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Cherry-picked from mainline
d8ee4a1c90529ed06e1aa43d034986649f7b670b
Change-Id: Ibf8e407351082d816dd051d2c69a4a1a7caa70e7
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/92321
Reviewed-by: Automatic_Commit_Validation_User
|
|
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
(cherry picked from commit a16ca23935afc0d72215b139720bd07df3162a9f)
Change-Id: I90ae154a3b124fad0e9320ac5d9d8083175461b5
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/92320
Reviewed-by: Automatic_Commit_Validation_User
|
|
request_any_context_irq() should handle the case when using GPIO expanders
that themselves use threaded IRQs, and so the premise of change
7e2ecdf438bb479e2b4667fc16b1a84d6348da04 is incorrect.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
(cherry picked from commit 6709c9a5d8c53092cbe89128df4e0a549e93133b)
Change-Id: I0b4267f6493483c2edc9926f48ecda68d863bead
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/92319
Reviewed-by: Automatic_Commit_Validation_User
|
|
The platform data should not be altered and therefore should be
accessed through const pointers.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Cherry-picked from
d9080921aa32c70a95476ce387e973787b892591
Change-Id: I5791f831909d4417a5c2732e310630c97c42f4a9
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/92318
Reviewed-by: Automatic_Commit_Validation_User
|
|
Use the of_property_read_u32() helper function to retrieve u32 values
from the device tree. Also do not pass the len parameter to
of_get_property if it isn't checked afterwards.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
(cherry picked from commit cca84699a079a91b0a0cb4f2da8548e56859376a)
Change-Id: I265e0cdc8b761572d1c78d699d761097be26a4e4
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/92317
Reviewed-by: Automatic_Commit_Validation_User
|
|
Bug 953357
Signed-off-by: Sumit Bhattacharya <sumitb@nvidia.com>
Reviewed-on: http://git-master/r/90845
(cherry picked from commit 24b715551882d387b82a89e0213012863e46bb95)
Change-Id: Ia8632fccab0708dacd9ef4b9360f8ef499b47818
Reviewed-on: http://git-master/r/92280
Tested-by: Sumit Bhattacharya <sumitb@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Scott Peterson <speterson@nvidia.com>
|
|
PPCS physical address is different for Tegra 3x and 2x
Change-Id: If26f08f6f234786194f6642523b644e8bf4be770
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Reviewed-on: http://git-master/r/91768
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Venkat Moganty <vmoganty@nvidia.com>
|
|
Save the key in hardware when the key setting call comes. Currently it is
set at later time.
Bug 917607
Change-Id: Ibdacb07c16c161eeba00eda6716884518e40c40a
Signed-off-by: Sanjay Singh Rawat <srawat@nvidia.com>
Reviewed-on: http://git-master/r/90072
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Varun Wadekar <vwadekar@nvidia.com>
|
|
Bug 896060
Reviewed-on: http://git-master/r/84679
(cherry picked from commit e1eb8a0802ff7c2aaf8e278e0f8cfd1fa06758be)
Change-Id: Ic233905eaa22775daa894c0132187b1192824b01
Signed-off-by: Ray Poudrier <rapoudrier@nvidia.com>
Conflicts:
arch/arm/mach-tegra/board-cardhu-memory.c
Change-Id: Ic233905eaa22775daa894c0132187b1192824b01
Reviewed-on: http://git-master/r/88867
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Raymond Poudrier <rapoudrier@nvidia.com>
Tested-by: Raymond Poudrier <rapoudrier@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|