summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-16sctp: do not free asoc when it is already dead in sctp_sendmsgXin Long
[ Upstream commit ca3af4dd28cff4e7216e213ba3b671fbf9f84758 ] Now in sctp_sendmsg sctp_wait_for_sndbuf could schedule out without holding sock sk. It means the current asoc can be freed elsewhere, like when receiving an abort packet. If the asoc is just created in sctp_sendmsg and sctp_wait_for_sndbuf returns err, the asoc will be freed again due to new_asoc is not nil. An use-after-free issue would be triggered by this. This patch is to fix it by setting new_asoc with nil if the asoc is already dead when cpu schedules back, so that it will not be freed again in sctp_sendmsg. v1->v2: set new_asoc as nil in sctp_sendmsg instead of sctp_wait_for_sndbuf. Suggested-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16sparc64/mm: set fields in deferred pagesPavel Tatashin
[ Upstream commit 2a20aa171071a334d80c4e5d5af719d8374702fc ] Without deferred struct page feature (CONFIG_DEFERRED_STRUCT_PAGE_INIT), flags and other fields in "struct page"es are never changed prior to first initializing struct pages by going through __init_single_page(). With deferred struct page feature enabled there is a case where we set some fields prior to initializing: mem_init() { register_page_bootmem_info(); free_all_bootmem(); ... } When register_page_bootmem_info() is called only non-deferred struct pages are initialized. But, this function goes through some reserved pages which might be part of the deferred, and thus are not yet initialized. mem_init register_page_bootmem_info register_page_bootmem_info_node get_page_bootmem .. setting fields here .. such as: page->freelist = (void *)type; free_all_bootmem() free_low_memory_core_early() for_each_reserved_mem_region() reserve_bootmem_region() init_reserved_page() <- Only if this is deferred reserved page __init_single_pfn() __init_single_page() memset(0) <-- Loose the set fields here We end up with similar issue as in the previous patch, where currently we do not observe problem as memory is zeroed. But, if flag asserts are changed we can start hitting issues. Also, because in this patch series we will stop zeroing struct page memory during allocation, we must make sure that struct pages are properly initialized prior to using them. The deferred-reserved pages are initialized in free_all_bootmem(). Therefore, the fix is to switch the above calls. Link: http://lkml.kernel.org/r/20171013173214.27300-4-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16block: wake up all tasks blocked in get_request()Ming Lei
[ Upstream commit 34d9715ac1edd50285168dd8d80c972739a4f6a4 ] Once blk_set_queue_dying() is done in blk_cleanup_queue(), we call blk_freeze_queue() and wait for q->q_usage_counter becoming zero. But if there are tasks blocked in get_request(), q->q_usage_counter can never become zero. So we have to wake up all these tasks in blk_set_queue_dying() first. Fixes: 3ef28e83ab157997 ("block: generic request_queue reference counting") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16sunrpc: Fix rpc_task_begin trace pointChuck Lever
[ Upstream commit b2bfe5915d5fe7577221031a39ac722a0a2a1199 ] The rpc_task_begin trace point always display a task ID of zero. Move the trace point call site so that it picks up the new task ID. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16NFS: Fix a typo in nfs_rename()Trond Myklebust
[ Upstream commit d803224c84be067754db7fa58a93f36f61566493 ] On successful rename, the "old_dentry" is retained and is attached to the "new_dir", so we need to call nfs_set_verifier() accordingly. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16dynamic-debug-howto: fix optional/omitted ending line number to be LARGE ↵Randy Dunlap
instead of 0 [ Upstream commit 1f3c790bd5989fcfec9e53ad8fa09f5b740c958f ] line-range is supposed to treat "1-" as "1-endoffile", so handle the special case by setting last_lineno to UINT_MAX. Fixes this error: dynamic_debug:ddebug_parse_query: last-line:0 < 1st-line:1 dynamic_debug:ddebug_exec_query: query parse failed Link: http://lkml.kernel.org/r/10a6a101-e2be-209f-1f41-54637824788e@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16lib/genalloc.c: make the avail variable an atomic_long_tStephen Bates
[ Upstream commit 36a3d1dd4e16bcd0d2ddfb4a2ec7092f0ae0d931 ] If the amount of resources allocated to a gen_pool exceeds 2^32 then the avail atomic overflows and this causes problems when clients try and borrow resources from the pool. This is only expected to be an issue on 64 bit systems. Add the <linux/atomic.h> header to pull in atomic_long* operations. So that 32 bit systems continue to use atomic32_t but 64 bit systems can use atomic64_t. Link: http://lkml.kernel.org/r/1509033843-25667-1-git-send-email-sbates@raithlin.com Signed-off-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: Daniel Mentz <danielmentz@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16route: update fnhe_expires for redirect when the fnhe existsXin Long
[ Upstream commit e39d5246111399dbc6e11cd39fd8580191b86c47 ] Now when creating fnhe for redirect, it sets fnhe_expires for this new route cache. But when updating the exist one, it doesn't do it. It will cause this fnhe never to be expired. Paolo already noticed it before, in Jianlin's test case, it became even worse: When ip route flush cache, the old fnhe is not to be removed, but only clean it's members. When redirect comes again, this fnhe will be found and updated, but never be expired due to fnhe_expires not being set. So fix it by simply updating fnhe_expires even it's for redirect. Fixes: aee06da6726d ("ipv4: use seqlock for nh_exceptions") Reported-by: Jianlin Shi <jishi@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16route: also update fnhe_genid when updating a route cacheXin Long
[ Upstream commit cebe84c6190d741045a322f5343f717139993c08 ] Now when ip route flush cache and it turn out all fnhe_genid != genid. If a redirect/pmtu icmp packet comes and the old fnhe is found and all it's members but fnhe_genid will be updated. Then next time when it looks up route and tries to rebind this fnhe to the new dst, the fnhe will be flushed due to fnhe_genid != genid. It causes this redirect/pmtu icmp packet acutally not to be applied. This patch is to also reset fnhe_genid when updating a route cache. Fixes: 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions") Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16mac80211_hwsim: Fix memory leak in hwsim_new_radio_nl()Ben Hutchings
[ Upstream commit 67bd52386125ce1159c0581cbcd2740addf33cd4 ] hwsim_new_radio_nl() now copies the name attribute in order to add a null-terminator. mac80211_hwsim_new_radio() (indirectly) copies it again into the net_device structure, so the first copy is not used or freed later. Free the first copy before returning. Fixes: ff4dd73dd2b4 ("mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16kbuild: pkg: use --transform option to prefix paths in tarMasahiro Yamada
[ Upstream commit 2dbc644ac62bbcb9ee78e84719953f611be0413d ] For rpm-pkg and deb-pkg, a source tar file is created. All paths in the archive must be prefixed with the base name of the tar so that everything is contained in the directory when you extract it. Currently, scripts/package/Makefile uses a symlink for that, and removes it after the tar is created. If you terminate the build during the tar creation, the symlink is left over. Then, at the next package build, you will see a warning like follows: ln: '.' and 'kernel-4.14.0+/.' are the same file It is possible to fix it by adding -n (--no-dereference) option to the "ln" command, but a cleaner way is to use --transform option of "tar" command. This option is GNU extension, but it should not hurt to use it in the Linux build system. The 'S' flag is needed to exclude symlinks from the path fixup. Without it, symlinks in the kernel are broken. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16EDAC, i5000, i5400: Fix definition of NRECMEMB registerJérémy Lefaure
[ Upstream commit a8c8261425649da58bdf08221570e5335ad33a31 ] In the i5000 and i5400 drivers, the NRECMEMB register is defined as a 16-bit value, which results in wrong shifts in the code, as reported by sparse. In the datasheets ([1], section 3.9.22.20 and [2], section 3.9.22.21), this register is a 32-bit register. A u32 value for the register fixes the wrong shifts warnings and matches the datasheet. Also fix the mask to access to the CAS bits [27:16] in the i5000 driver. [1]: https://www.intel.com/content/dam/doc/datasheet/5000p-5000v-5000z-chipset-memory-controller-hub-datasheet.pdf [2]: https://www.intel.se/content/dam/doc/datasheet/5400-chipset-memory-controller-hub-datasheet.pdf Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170629005729.8478-1-jeremy.lefaure@lse.epita.fr Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16EDAC, i5000, i5400: Fix use of MTR_DRAM_WIDTH macroJérémy Lefaure
[ Upstream commit e61555c29c28a4a3b6ba6207f4a0883ee236004d ] The MTR_DRAM_WIDTH macro returns the data width. It is sometimes used as if it returned a boolean true if the width if 8. Fix the tests where MTR_DRAM_WIDTH is misused. Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170309011809.8340-1-jeremy.lefaure@lse.epita.fr Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requestedAlexey Kardashevskiy
[ Upstream commit 7aafac11e308d37ed3c509829bb43d80c1811ac3 ] The IODA2 specification says that a 64 DMA address cannot use top 4 bits (3 are reserved and one is a "TVE select"); bottom page_shift bits cannot be used for multilevel table addressing either. The existing IODA2 table allocation code aligns the minimum TCE table size to PAGE_SIZE so in the case of 64K system pages and 4K IOMMU pages, we have 64-4-12=48 bits. Since 64K page stores 8192 TCEs, i.e. needs 13 bits, the maximum number of levels is 48/13 = 3 so we physically cannot address more and EEH happens on DMA accesses. This adds a check that too many levels were requested. It is still possible to have 5 levels in the case of 4K system page size. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16drm/amd/amdgpu: fix console deadlock if late init failedJim Qu
[ Upstream commit c085bd5119d5d0bdf3ef591a5563566be7dedced ] Signed-off-by: Jim Qu <Jim.Qu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16axonram: Fix gendisk handlingJan Kara
[ Upstream commit 672a2c87c83649fb0167202342ce85af9a3b4f1c ] It is invalid to call del_gendisk() when disk->queue is NULL. Fix error handling in axon_ram_probe() to avoid doing that. Also del_gendisk() does not drop a reference to gendisk allocated by alloc_disk(). That has to be done by put_disk(). Add that call where needed. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16netfilter: don't track fragmented packetsFlorian Westphal
[ Upstream commit 7b4fdf77a450ec0fdcb2f677b080ddbf2c186544 ] Andrey reports syzkaller splat caused by NF_CT_ASSERT(!ip_is_fragment(ip_hdr(skb))); in ipv4 nat. But this assertion (and the comment) are wrong, this function does see fragments when IP_NODEFRAG setsockopt is used. As conntrack doesn't track packets without complete l4 header, only the first fragment is tracked. Because applying nat to first packet but not the rest makes no sense this also turns off tracking of all fragments. Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16zram: set physical queue limits to avoid array out of bounds accessesJohannes Thumshirn
[ Upstream commit 0bc315381fe9ed9fb91db8b0e82171b645ac008f ] zram can handle at most SECTORS_PER_PAGE sectors in a bio's bvec. When using the NVMe over Fabrics loopback target which potentially sends a huge bulk of pages attached to the bio's bvec this results in a kernel panic because of array out of bounds accesses in zram_decompress_page(). Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16i2c: riic: fix restart conditionChris Brandt
[ Upstream commit 2501c1bb054290679baad0ff7f4f07c714251f4c ] While modifying the driver to use the STOP interrupt, the completion of the intermediate transfers need to wake the driver back up in order to initiate the next transfer (restart condition). Otherwise you get never ending interrupts and only the first transfer sent. Fixes: 71ccea095ea1 ("i2c: riic: correctly finish transfers") Reported-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16crypto: s5p-sss - Fix completing crypto request in IRQ handlerKrzysztof Kozlowski
[ Upstream commit 07de4bc88ce6a4d898cad9aa4c99c1df7e87702d ] In a regular interrupt handler driver was finishing the crypt/decrypt request by calling complete on crypto request. This is disallowed since converting to skcipher in commit b286d8b1a690 ("crypto: skcipher - Add skcipher walk interface") and causes a warning: WARNING: CPU: 0 PID: 0 at crypto/skcipher.c:430 skcipher_walk_first+0x13c/0x14c The interrupt is marked shared but in fact there are no other users sharing it. Thus the simplest solution seems to be to just use a threaded interrupt handler, after converting it to oneshot. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16ipv6: reorder icmpv6_init() and ip6_mr_init()WANG Cong
[ Upstream commit 15e668070a64bb97f102ad9cf3bccbca0545cda8 ] Andrey reported the following kernel crash: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 14446 Comm: syz-executor6 Not tainted 4.10.0+ #82 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88001f311700 task.stack: ffff88001f6e8000 RIP: 0010:ip6mr_sk_done+0x15a/0x3d0 net/ipv6/ip6mr.c:1618 RSP: 0018:ffff88001f6ef418 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 1ffff10003edde8c RCX: ffffc900043ee000 RDX: 0000000000000004 RSI: ffffffff83e3b3f8 RDI: 0000000000000020 RBP: ffff88001f6ef508 R08: fffffbfff0dcc5d8 R09: 0000000000000000 R10: ffffffff86e62ec0 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88001f6ef4e0 R15: ffff8800380a0040 FS: 00007f7a52cec700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000061c500 CR3: 000000001f1ae000 CR4: 00000000000006f0 DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Call Trace: rawv6_close+0x4c/0x80 net/ipv6/raw.c:1217 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:432 sock_release+0x8d/0x1e0 net/socket.c:597 __sock_create+0x39d/0x880 net/socket.c:1226 sock_create_kern+0x3f/0x50 net/socket.c:1243 inet_ctl_sock_create+0xbb/0x280 net/ipv4/af_inet.c:1526 icmpv6_sk_init+0x163/0x500 net/ipv6/icmp.c:954 ops_init+0x10a/0x550 net/core/net_namespace.c:115 setup_net+0x261/0x660 net/core/net_namespace.c:291 copy_net_ns+0x27e/0x540 net/core/net_namespace.c:396 9pnet_virtio: no channels available for device ./file1 create_new_namespaces+0x437/0x9b0 kernel/nsproxy.c:106 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:205 SYSC_unshare kernel/fork.c:2281 [inline] SyS_unshare+0x64e/0x1000 kernel/fork.c:2231 entry_SYSCALL_64_fastpath+0x1f/0xc2 This is because net->ipv6.mr6_tables is not initialized at that point, ip6mr_rules_init() is not called yet, therefore on the error path when we iterator the list, we trigger this oops. Fix this by reordering ip6mr_rules_init() before icmpv6_sk_init(). Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16bnx2x: do not rollback VF MAC/VLAN filters we did not configureMichal Schmidt
[ Upstream commit 78d5505432436516456c12abbe705ec8dee7ee2b ] On failure to configure a VF MAC/VLAN filter we should not attempt to rollback filters that we failed to configure with -EEXIST. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16bnx2x: fix possible overrun of VFPF multicast addresses arrayMichal Schmidt
[ Upstream commit 22118d861cec5da6ed525aaf12a3de9bfeffc58f ] It is too late to check for the limit of the number of VF multicast addresses after they have already been copied to the req->multicast[] array, possibly overflowing it. Do the check before copying. Also fix the error path to not skip unlocking vf2pf_mutex. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16bnx2x: prevent crash when accessing PTP with interface downMichal Schmidt
[ Upstream commit 466e8bf10ac104d96e1ea813e8126e11cb72ea20 ] It is possible to crash the kernel by accessing a PTP device while its associated bnx2x interface is down. Before the interface is brought up, the timecounter is not initialized, so accessing it results in NULL dereference. Fix it by checking if the interface is up. Use -ENETDOWN as the error code when the interface is down. -EFAULT in bnx2x_ptp_adjfreq() did not seem right. Tested using phc_ctl get/set/adj/freq commands. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16spi_ks8995: fix "BUG: key accdaa28 not in .data!"Blomme, Maarten
[ Upstream commit 4342696df764ec65dcdfbd0c10d90ea52505f8ba ] Signed-off-by: Maarten Blomme <Maarten.Blomme@flir.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16arm64: KVM: Survive unknown traps from guestsMark Rutland
[ Upstream commit ba4dd156eabdca93501d92a980ba27fa5f4bbd27 ] Currently we BUG() if we see an ESR_EL2.EC value we don't recognise. As configurable disables/enables are added to the architecture (controlled by RES1/RES0 bits respectively), with associated synchronous exceptions, it may be possible for a guest to trigger exceptions with classes that we don't recognise. While we can't service these exceptions in a manner useful to the guest, we can avoid bringing down the host. Per ARM DDI 0487A.k_iss10775, page D7-1937, EC values within the range 0x00 - 0x2c are reserved for future use with synchronous exceptions, and EC values within the range 0x2d - 0x3f may be used for either synchronous or asynchronous exceptions. The patch makes KVM handle any unknown EC by injecting an UNDEFINED exception into the guest, with a corresponding (ratelimited) warning in the host dmesg. We could later improve on this with with a new (opt-in) exit to the host userspace. Cc: Dave Martin <dave.martin@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16arm: KVM: Survive unknown traps from guestsMark Rutland
[ Upstream commit f050fe7a9164945dd1c28be05bf00e8cfb082ccf ] Currently we BUG() if we see a HSR.EC value we don't recognise. As configurable disables/enables are added to the architecture (controlled by RES1/RES0 bits respectively), with associated synchronous exceptions, it may be possible for a guest to trigger exceptions with classes that we don't recognise. While we can't service these exceptions in a manner useful to the guest, we can avoid bringing down the host. Per ARM DDI 0406C.c, all currently unallocated HSR EC encodings are reserved, and per ARM DDI 0487A.k_iss10775, page G6-4395, EC values within the range 0x00 - 0x2c are reserved for future use with synchronous exceptions, and EC values within the range 0x2d - 0x3f may be used for either synchronous or asynchronous exceptions. The patch makes KVM handle any unknown EC by injecting an UNDEFINED exception into the guest, with a corresponding (ratelimited) warning in the host dmesg. We could later improve on this with with a new (opt-in) exit to the host userspace. Cc: Dave Martin <dave.martin@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16KVM: nVMX: reset nested_run_pending if the vCPU is going to be resetWanpeng Li
[ Upstream commit 2f707d97982286b307ef2a9b034e19aabc1abb56 ] Reported by syzkaller: WARNING: CPU: 1 PID: 27742 at arch/x86/kvm/vmx.c:11029 nested_vmx_vmexit+0x5c35/0x74d0 arch/x86/kvm/vmx.c:11029 CPU: 1 PID: 27742 Comm: a.out Not tainted 4.10.0+ #229 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 panic+0x1fb/0x412 kernel/panic.c:179 __warn+0x1c4/0x1e0 kernel/panic.c:540 warn_slowpath_null+0x2c/0x40 kernel/panic.c:583 nested_vmx_vmexit+0x5c35/0x74d0 arch/x86/kvm/vmx.c:11029 vmx_leave_nested arch/x86/kvm/vmx.c:11136 [inline] vmx_set_msr+0x1565/0x1910 arch/x86/kvm/vmx.c:3324 kvm_set_msr+0xd4/0x170 arch/x86/kvm/x86.c:1099 do_set_msr+0x11e/0x190 arch/x86/kvm/x86.c:1128 __msr_io arch/x86/kvm/x86.c:2577 [inline] msr_io+0x24b/0x450 arch/x86/kvm/x86.c:2614 kvm_arch_vcpu_ioctl+0x35b/0x46a0 arch/x86/kvm/x86.c:3497 kvm_vcpu_ioctl+0x232/0x1120 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2721 vfs_ioctl fs/ioctl.c:43 [inline] do_vfs_ioctl+0x1bf/0x1790 fs/ioctl.c:683 SYSC_ioctl fs/ioctl.c:698 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:689 entry_SYSCALL_64_fastpath+0x1f/0xc2 The syzkaller folks reported a nested_run_pending warning during userspace clear VMX capability which is exposed to L1 before. The warning gets thrown while doing (*(uint32_t*)0x20aecfe8 = (uint32_t)0x1); (*(uint32_t*)0x20aecfec = (uint32_t)0x0); (*(uint32_t*)0x20aecff0 = (uint32_t)0x3a); (*(uint32_t*)0x20aecff4 = (uint32_t)0x0); (*(uint64_t*)0x20aecff8 = (uint64_t)0x0); r[29] = syscall(__NR_ioctl, r[4], 0x4008ae89ul, 0x20aecfe8ul, 0, 0, 0, 0, 0, 0); i.e. KVM_SET_MSR ioctl with struct kvm_msrs { .nmsrs = 1, .pad = 0, .entries = { {.index = MSR_IA32_FEATURE_CONTROL, .reserved = 0, .data = 0} } } The VMLANCH/VMRESUME emulation should be stopped since the CPU is going to reset here. This patch resets the nested_run_pending since the CPU is going to be reset hence there should be nothing pending. Reported-by: Dmitry Vyukov <dvyukov@google.com> Suggested-by: Radim Krčmář <rkrcmar@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16irqchip/crossbar: Fix incorrect type of register sizeFranck Demathieu
[ Upstream commit 4b9de5da7e120c7f02395da729f0ec77ce7a6044 ] The 'size' variable is unsigned according to the dt-bindings. As this variable is used as integer in other places, create a new variable that allows to fix the following sparse issue (-Wtypesign): drivers/irqchip/irq-crossbar.c:279:52: warning: incorrect type in argument 3 (different signedness) drivers/irqchip/irq-crossbar.c:279:52: expected unsigned int [usertype] *out_value drivers/irqchip/irq-crossbar.c:279:52: got int *<noident> Signed-off-by: Franck Demathieu <fdemathieu@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adaptersJames Smart
[ Upstream commit 5d181531bc6169e19a02a27d202cf0e982db9d0e ] if REG_VPI fails, the driver was incorrectly issuing INIT_VFI (a SLI4 command) on a SLI3 adapter. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16workqueue: trigger WARN if queue_delayed_work() is called with NULL @wqTejun Heo
[ Upstream commit 637fdbae60d6cb9f6e963c1079d7e0445c86ff7d ] If queue_delayed_work() gets called with NULL @wq, the kernel will oops asynchronuosly on timer expiration which isn't too helpful in tracking down the offender. This actually happened with smc. __queue_delayed_work() already does several input sanity checks synchronously. Add NULL @wq check. Reported-by: Dave Jones <davej@codemonkey.org.uk> Link: http://lkml.kernel.org/r/20170227171439.jshx3qplflyrgcv7@codemonkey.org.uk Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16libata: drop WARN from protocol error in ata_sff_qc_issue()Tejun Heo
[ Upstream commit 0580b762a4d6b70817476b90042813f8573283fa ] ata_sff_qc_issue() expects upper layers to never issue commands on a command protocol that it doesn't implement. While the assumption holds fine with the usual IO path, nothing filters based on the command protocol in the passthrough path (which was added later), allowing the warning to be tripped with a passthrough command with the right (well, wrong) protocol. Failing with AC_ERR_SYSTEM is the right thing to do anyway. Remove the unnecessary WARN. Reported-by: Dmitry Vyukov <dvyukov@google.com> Link: http://lkml.kernel.org/r/CACT4Y+bXkvevNZU8uP6X0QVqsj6wNoUA_1exfTSOzc+SmUtMOA@mail.gmail.com Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16kvm: nVMX: VMCLEAR should not cause the vCPU to shut downJim Mattson
[ Upstream commit 587d7e72aedca91cee80c0a56811649c3efab765 ] VMCLEAR should silently ignore a failure to clear the launch state of the VMCS referenced by the operand. Signed-off-by: Jim Mattson <jmattson@google.com> [Changed "kvm_write_guest(vcpu->kvm" to "kvm_vcpu_write_guest(vcpu".] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16USB: gadgetfs: Fix a potential memory leak in 'dev_config()'Christophe JAILLET
[ Upstream commit b6e7aeeaf235901c42ec35de4633c7c69501d303 ] 'kbuf' is allocated just a few lines above using 'memdup_user()'. If the 'if (dev->buf)' test fails, this memory is never released. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16usb: gadget: configs: plug memory leakJohn Keeping
[ Upstream commit 38355b2a44776c25b0f2ad466e8c51bb805b3032 ] When binding a gadget to a device, "name" is stored in gi->udc_name, but this does not happen when unregistering and the string is leaked. Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16HID: chicony: Add support for another ASUS Zen AiO keyboardDaniel Drake
[ Upstream commit f2f10b7e722a75c6d75a7f7cd06b0eee3ae20f7c ] Add support for media keys on the keyboard that comes with the Asus V221ID and ZN241IC All In One computers. The keys to support here are WLAN, BRIGHTNESSDOWN and BRIGHTNESSUP. This device is not visibly branded as Chicony, and the USB Vendor ID suggests that it is a JESS device. However this seems like the right place to put it: the usage codes are identical to the currently supported devices, and this driver already supports the ASUS AIO keyboard AK1D. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16gpio: altera: Use handle_level_irq when configured as a level_highPhil Reid
[ Upstream commit f759921cfbf4847319d197a6ed7c9534d593f8bc ] When a threaded irq handler is chained attached to one of the gpio pins when configure for level irq the altera_gpio_irq_leveL_high_handler does not mask the interrupt while being handled by the chained irq. This resulting in the threaded irq not getting enough cycles to complete quickly enough before the irq was disabled as faulty. handle_level_irq should be used in this situation instead of handle_simple_irq. In gpiochip_irqchip_add set default handler to handle_bad_irq as per Documentation/gpio/driver.txt. Then set the correct handler in the set_type callback. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16ARM: OMAP2+: Release device node after it is no longer needed.Guenter Roeck
[ Upstream commit b92675d998a9fa37fe9e0e35053a95b4a23c158b ] The device node returned by of_find_node_by_name() needs to be released after it is no longer needed to avoid a device node leak. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16ARM: OMAP2+: Fix device node reference countsGuenter Roeck
[ Upstream commit 10e5778f54765c96fe0c8f104b7a030e5b35bc72 ] After commit 0549bde0fcb1 ("of: fix of_node leak caused in of_find_node_opts_by_path"), the following error may be reported when running omap images. OF: ERROR: Bad of_node_put() on /ocp@68000000 CPU: 0 PID: 0 Comm: swapper Not tainted 4.10.0-rc7-next-20170210 #1 Hardware name: Generic OMAP3-GP (Flattened Device Tree) [<c0310604>] (unwind_backtrace) from [<c030bbf4>] (show_stack+0x10/0x14) [<c030bbf4>] (show_stack) from [<c05add8c>] (dump_stack+0x98/0xac) [<c05add8c>] (dump_stack) from [<c05af1b0>] (kobject_release+0x48/0x7c) [<c05af1b0>] (kobject_release) from [<c0ad1aa4>] (of_find_node_by_name+0x74/0x94) [<c0ad1aa4>] (of_find_node_by_name) from [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable+0x24/0x2c) [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable) from [<c1215d5c>] (omap3xxx_hwmod_init+0x180/0x274) [<c1215d5c>] (omap3xxx_hwmod_init) from [<c120faa8>] (omap3_init_early+0xa0/0x11c) [<c120faa8>] (omap3_init_early) from [<c120fb2c>] (omap3430_init_early+0x8/0x30) [<c120fb2c>] (omap3430_init_early) from [<c1204710>] (setup_arch+0xc04/0xc34) [<c1204710>] (setup_arch) from [<c1200948>] (start_kernel+0x68/0x38c) [<c1200948>] (start_kernel) from [<8020807c>] (0x8020807c) of_find_node_by_name() drops the reference to the passed device node. The commit referenced above exposes this problem. To fix the problem, use of_get_child_by_name() instead of of_find_node_by_name(); of_get_child_by_name() does not drop the reference count of passed device nodes. While semantically different, we only look for immediate children of the passed device node, so of_get_child_by_name() is a more appropriate function to use anyway. Release the reference to the device node obtained with of_get_child_by_name() after it is no longer needed to avoid another device node leak. While at it, clean up the code and change the return type of omap3xxx_hwmod_is_hs_ip_block_usable() to bool to match its use and the return type of of_device_is_available(). Cc: Qi Hou <qi.hou@windriver.com> Cc: Peter Rosin <peda@axentia.se> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16module: set __jump_table alignment to 8David Daney
[ Upstream commit ab42632156becd35d3884ee5c14da2bedbf3149a ] For powerpc the __jump_table section in modules is not aligned, this causes a WARN_ON() splat when loading a module containing a __jump_table. Strict alignment became necessary with commit 3821fd35b58d ("jump_label: Reduce the size of struct static_key"), currently in linux-next, which uses the two least significant bits of pointers to __jump_table elements. Fix by forcing __jump_table to 8, which is the same alignment used for this section in the kernel proper. Link: http://lkml.kernel.org/r/20170301220453.4756-1-david.daney@cavium.com Reviewed-by: Jason Baron <jbaron@akamai.com> Acked-by: Jessica Yu <jeyu@redhat.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16selftest/powerpc: Fix false failures for skipped testsSachin Sant
[ Upstream commit a6d8a21596df041f36f4c2ccc260c459e3e851f1 ] Tests under alignment subdirectory are skipped when executed on previous generation hardware, but harness still marks them as failed. test: test_copy_unaligned tags: git_version:unknown [SKIP] Test skipped on line 26 skip: test_copy_unaligned selftests: copy_unaligned [FAIL] The MAGIC_SKIP_RETURN_VALUE value assigned to rc variable is retained till the program exit which causes the test to be marked as failed. This patch resets the value before returning to the main() routine. With this patch the test o/p is as follows: test: test_copy_unaligned tags: git_version:unknown [SKIP] Test skipped on line 26 skip: test_copy_unaligned selftests: copy_unaligned [PASS] Signed-off-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16x86/hpet: Prevent might sleep splat on resumeThomas Gleixner
[ Upstream commit bb1a2c26165640ba2cbcfe06c81e9f9d6db4e643 ] Sergey reported a might sleep warning triggered from the hpet resume path. It's caused by the call to disable_irq() from interrupt disabled context. The problem with the low level resume code is that it is not accounted as a special system_state like we do during the boot process. Calling the same code during system boot would not trigger the warning. That's inconsistent at best. In this particular case it's trivial to replace the disable_irq() with disable_hardirq() because this particular code path is solely used from system resume and the involved hpet interrupts can never be force threaded. Reported-and-tested-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1703012108460.3684@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16ARM: OMAP2+: gpmc-onenand: propagate error on initialization failureLadislav Michl
[ Upstream commit 7807e086a2d1f69cc1a57958cac04fea79fc2112 ] gpmc_probe_onenand_child returns success even on gpmc_onenand_init failure. Fix that. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16vti6: Don't report path MTU below IPV6_MIN_MTU.Steffen Klassert
[ Upstream commit e3dc847a5f85b43ee2bfc8eae407a7e383483228 ] In vti6_xmit(), the check for IPV6_MIN_MTU before we send a ICMPV6_PKT_TOOBIG message is missing. So we might report a PMTU below 1280. Fix this by adding the required check. Fixes: ccd740cbc6e ("vti6: Add pmtu handling to vti6_xmit.") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16Revert "s390/kbuild: enable modversions for symbols exported from asm"Sasha Levin
This reverts commit cabab3f9f5ca077535080b3252e6168935b914af. Not needed for < 4.9. Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16Revert "spi: SPI_FSL_DSPI should depend on HAS_DMA"Sasha Levin
This reverts commit dadab2d4e3cf708ceba22ecddd94aedfecb39199. Not required on < 4.10. Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16Revert "drm/armada: Fix compile fail"Sasha Levin
This reverts commit 82f260d472c3b4dbb7324624e395c3e91f73a040. Not required on < 4.10. Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16mm: drop unused pmdp_huge_get_and_clear_notify()Kirill A. Shutemov
commit c0c379e2931b05facef538e53bf3b21f283d9a0b upstream. Dave noticed that after fixing MADV_DONTNEED vs numa balancing race the last pmdp_huge_get_and_clear_notify() user is gone. Let's drop the helper. Link: http://lkml.kernel.org/r/20170306112047.24809-1-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [jwang: adjust context for 4.4] Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16thp: fix MADV_DONTNEED vs. numa balancing raceKirill A. Shutemov
commit ced108037c2aa542b3ed8b7afd1576064ad1362a upstream. In case prot_numa, we are under down_read(mmap_sem). It's critical to not clear pmd intermittently to avoid race with MADV_DONTNEED which is also under down_read(mmap_sem): CPU0: CPU1: change_huge_pmd(prot_numa=1) pmdp_huge_get_and_clear_notify() madvise_dontneed() zap_pmd_range() pmd_trans_huge(*pmd) == 0 (without ptl) // skip the pmd set_pmd_at(); // pmd is re-established The race makes MADV_DONTNEED miss the huge pmd and don't clear it which may break userspace. Found by code analysis, never saw triggered. Link: http://lkml.kernel.org/r/20170302151034.27829-3-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [jwang: adjust context for 4.4] Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16thp: reduce indentation level in change_huge_pmd()Kirill A. Shutemov
commit 0a85e51d37645e9ce57e5e1a30859e07810ed07c upstream. Patch series "thp: fix few MADV_DONTNEED races" For MADV_DONTNEED to work properly with huge pages, it's critical to not clear pmd intermittently unless you hold down_write(mmap_sem). Otherwise MADV_DONTNEED can miss the THP which can lead to userspace breakage. See example of such race in commit message of patch 2/4. All these races are found by code inspection. I haven't seen them triggered. I don't think it's worth to apply them to stable@. This patch (of 4): Restructure code in preparation for a fix. Link: http://lkml.kernel.org/r/20170302151034.27829-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [jwang: adjust context for 4.4 kernel] Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-04-28 22:43:28 +0000