summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-04-27V4L/DVB (5455): Dvb-pll: Adjust rounding to be consistentTrent Piepho
Some PLLs had one half the step size added to the offset, so that the divisor would be rounded to the nearest integer. Some didn't and so would always be rounded down. This makes dvb-pll round to the nearest when calculating the divisor, without the offset needing to be fudged. PLLs that had a fudged offset have the offset changed to be just the IF frequency. The satellite PLL dvb_pll_philips_sd1878_tda8261 was rounding up for some reason, and I've kept it that way. In addition, frequencies that were rounded to the nearest kHz are extended to full Hz resolution. One sixth MHz step sizes that were listed as 166,666 Hz are changed to 166,667 Hz, which is slightly closer. PLLs that were already rounding: dvb_pll_tda665x, offset was 36 1/6 (to nearest kHz) + step/2 dvb_pll_fmd1216me, offset was 36 1/8 (to two digits) + step/2 dvb_pll_thomson_fe6600, offset was 36 1/8 (to two digits) + step/2 dvb_pll_env57h1xd5, offset was 36 1/8 + step Note that the last PLL, dvb_pll_env57h1xd5, appears to have had a bug in the offset. Rather than adding stepsize/2, it was adding a full stepsize. The PLL definition originally came from the dibusb driver, which used 36 1/8 + step/2. The change to 36 1/8 + step was probably a mistake added when the tuner was converted to dvb-pll. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5452): Cx88: merge identical boardsTrent Piepho
The attach code for HAUPPAUGE_HVR3000 and HAUPPAUGE_HVR1300 is exactly the same as the code used by HAUPPAUGE_HVR1100, HAUPPAUGE_HVR1100LP, and WINFAST_DTV2000H. So, those first two cards are added to the case block used by the last three. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5449): M920x: add error messages for debugging purposesPierre Willenbrock
Signed-off-by: Pierre Willenbrock <pierre@pirsoft.dnsalias.org> Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5448): M920x: rename megasky_identify_state to m920x_identify_stateAapo Tahkola
This function should work for all m920x-based devices. Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5446): Renamed ASUStek P7131 card [1043:4876]Hartmut Hackmann
The new name fits to what it is and what is on the box. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5445): Added / corrected support for some ASUS hybrid boardsHartmut Hackmann
There are 2 new entries for p7131 boards and one correction for a board with LNA. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5444): Saa7134-dvb fix sleep function of the fmd1216 tuner.Hartmut Hackmann
Static locals should not be changed - the original contents gets lost. Thanks to Trent Piepho for pointing me to this. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5443): Saa7134: put tuner to sleep mode after board initializationHartmut Hackmann
Besides power saving, this puts the AGC output of the tda8290 to tristate. This is necessary for some hybrid boards which don't use a multiplexer for the AGC Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5440): Dvb-ttpci: Infrared remote initialization fixOliver Endriss
Fix bug introduced during infrared refactoring. Thanks to Johann Friedrichs for spotting this. Thanks-to: Johann Friedrichs <johann.friedrichs@web.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5438): Fix ivtv yuv threshold handlingIan Armstrong
Modifies automatic mode selection for yuv playback. Behaviour is now that source video with a vertical resolution below that of the currently set broadcast mode will be treated as progressive. Video with a vertical resolution greater or equal to the current broadcast mode (up to 576 lines) will be treated as interlaced. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5437): Update cx23415 documentationIan Armstrong
Adds more osd mode switching information. Corrects some information regarding mode selection & local alpha operation for 16 bit modes. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5436): Fix TV output initializationHans Verkuil
The TV standard should be set AFTER the TV output is fully initialized. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5434): Updates to the tveeprom tuner, video decoder and audio chipSteven Toth
Some of the new tuner entries may need to be mapped to compatible tuners already defined. I don't know for certain which tuners are compatible between manufacturers. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5432): Cx88: whitespace cleanupMichael Krufky
replace leading spaces with tabs Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5431): Cx88: autodetect ADS Tech InstantTV DVB-SMichael Krufky
The ADS Tech InstantTV DVB-S is a clone of the KWorld DVB-S 100. This patch adds autodetection support for this card based on pci subsystem id. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5428): M920x: Detect zero-length I2C messages and fix a typoTrent Piepho
Change a 00 to just 0 Detect zero-length I2C messages and return not supported. I think I know how to send one, but the problem is getting the slave's ack. The only point of a zero-length message is for probing; too see if the slave will ack its address. Since we don't know how to get the ack, we can't support zero-length messages in a useful way, so it's probably best to just return not supported for them. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5427): M920x: Improve I2C operationsTrent Piepho
Write some better documentation about what might be known about how the m920x I2C works, since a datasheet is lacking. The I2C xfer function should now handle more types of I2C transactions than it could before. Those it can't, will return error codes instead of being executed incorrectly. Multi-byte reads were not being done correctly, which should be fixed. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5426): M920x: remove unneeded codeAapo Tahkola
Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5425): M920x: rework driver code to allow for different devicesAapo Tahkola
Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5424): Fix i2c implementation for gl861 and au6610Aapo Tahkola
- r/w bit is not part of the i2c address Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5423): M920x: i2c cleanupsAapo Tahkola
- Implement m920x i2c as suggested by Pierre Willenbrock - remove "magic" hack - r/w bit is not part of the i2c address - move hardware remarks to header file Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5420): Initialize the inputs before registering the devices.Hans Verkuil
Once the devices have been registered anyone can start changing the inputs or TV standard before they have been initialized by the driver. This leads to cases were the input is changed in an udev rule, but after that rule is triggered the tail-end of the ivtv driver initialization can override that by selecting the tuner input. The correct sequence is to first setup the input, initial frequency and TV standard before finally registering the video devices. This prevents any udev rules from being triggered prematurely. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5419): Add comment how the speed field is interpreted.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5418): Speed is a signed 32-bit integer, not unsigned.Hans Verkuil
Negative speed values have to be allowed for reverse playback. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5417): First unregister the driver, and then free the memory.Hans Verkuil
ivtv_remove which is called by pci_unregister_driver was still using memory that was already freed. Ouch. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5416): Use pci_register_driver instead of pci_module_init in ivtv.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5414): Add missing kfree in early exit of saa7115.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5413): Use spin_lock_init to fix lockdep warnings.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5412): Fix VIDIOC_TRY_ENCODER_CMD and VIDEO_TRY_COMMANDHans Verkuil
VIDIOC_TRY_ENCODER_CMD did the same as VIDIOC_ENCODER_CMD, now it no longer touches the encoder. Both the encoder and decoder commands did not clear the flags field of unknown flags. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5411): Use v4l_printk_ioctl for debugHans Verkuil
Using v4l_printk_ioctl saves a lot of code duplication. Also moved a few ioctl cases to another function, improving the ioctl grouping. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5410): Add VIDIOC_G/S_PRIORITY support to ivtv.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5409): Add CARDLIST.ivtv and README.ivtvHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5407a): Update feature-removal-schedule.txt: remove VIDIOC_S/G_MPEGCOMPHans Verkuil
Those two experimental APIs never worked fine nor, afaik, were implemented at the apps. Their functionalities were implemented by other means. So, let's remove those obsolete stuff. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5406): Add comment why the symbols are exported.Hans Verkuil
It is not immediately obvious why the ivtv symbols are exported in ivtv-driver.c since both ivtv-fb and the IR-blaster module are still out-of-tree, currently being ported to be in kernel. Added a comment so people are aware of these issues. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5405): Add missing includes.Hans Verkuil
Every file should include the headers containing the prototypes for its global functions. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5404): Merges VBI & YUV handling into a single work queue.Hans Verkuil
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5403): Set vsync_field correctly in ivtv.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5402): Add vsync_field to the union in video_event for ↵Hans Verkuil
VIDEO_EVENT_VSYNC VIDEO_EVENT_VSYNC needs to tell the application which field it was that received a VSYNC (odd/even/progressive). The vsync_field was added to the union in video_event for this purpose. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5399): Usbvideo module handlingOliver Neukum
Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5398): Cpia_pp.c: don't use _WORK_NAROleg Nesterov
pp_cam_entry->cb_task need not to be _NOAUTOREL ... because in fact it is never used ??? Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5397): Saa7134: fix MODULES=n compilationAdrian Bunk
This patch fixes the following compile error with CONFIG_MODULES=n: CC drivers/media/video/saa7134/saa7134-core.o /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979:24: error: macro "request_submodules" passed 1 arguments, but takes just 0 /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c: In function 'saa7134_initdev': /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979: error: 'request_submodules' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979: error: for each function it appears in.) make[5]: *** [drivers/media/video/saa7134/saa7134-core.o] Error 1 Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5392): Zr364xx: Use kernel's byte-swapping functionTrent Piepho
Some code to swap bytes wasn't using the swab16() function that the kernel provides for this. Make use of it, which results in more efficient code. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5391): Saa7134: Clean up printk()sTrent Piepho
Change some debug messages from printk() to dprintk(). Add KERN_WARNING and KERN_ERR level indicators to other printk()s that lacked them. Format printk lines with consistent ("%s/dvb: ", dev->name) prefix. Fixed dprintk macro, which had an if with no else that wasn't protected with a do {} while(0) block. That leads to "if(...) dprintk(); else" not doing what one would expect. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5389): Add tveeprom entry for tuner LG S701D MK3Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5388): Ivtv warning fixAndrew Morton
drivers/media/video/ivtv/ivtv-i2c.c:547: warning: initializer-string for array of chars is too long drivers/media/video/ivtv/ivtv-i2c.c:547: warning: (near initialization for 'ivtv_i2c_client_template.name') Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5386): Add some missing Hauppauge and Belkin devices to the driverDwaine P. Garden
-Add some missing Hauppauge and Belkin devices to the driver. -Fixed up some device descriptions. Signed-off-by: Dwaine P. Garden <DwaineGarden@rogers.com> Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5385): Fix compilation issue with zr364xx when V4L1 is disabledAntoine Jacquet
Add a missing header to fix compilation issue in the zr364xx driver when CONFIG_VIDEO_V4L1 and CONFIG_VIDEO_V4L1_COMPAT are not set. Signed-off-by: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5383): Fix duplicated codes in Pinnacle Grey remoteEmil Georgiev
The keymap for this remote had duplicated labels for different keys, which resulted in those key pairs being unable to function as different inputs. Signed-off-by: Emil Georgiev <emilonlinester@gmail.com> Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5381): Dvb-ttpci: Update frontend lock status in transfer mode (bugfix)Oliver Endriss
In transfer/replay mode the frontend lock status was never updated. This caused a 'black screen' if VDR switched from transfer mode to live mode on the same transponder. Thanks to Marco Schluessler for spotting the problem. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5380): Cx25840-firmware include cleanupJean Delvare
There is no reason why cx25840-firmware.c would need to include <linux/i2c-algo-bit.h>. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-06 15:51:49 +0000