summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-10-01Linux 3.14.54v3.14.54Greg Kroah-Hartman
2015-10-01NVMe: Initialize device reference count earlierKeith Busch
commit fb35e914b3f88cda9ee6f9d776910c35269c4ecf upstream. If an NVMe device becomes ready but fails to create IO queues, the driver creates a character device handle so the device can be managed. The device reference count needs to be initialized before creating the character device. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01udf: Check length of extended attributes and allocation descriptorsJan Kara
commit 23b133bdc452aa441fcb9b82cbf6dd05cfd342d0 upstream. Check length of extended attributes and allocation descriptors when loading inodes from disk. Otherwise corrupted filesystems could confuse the code and make the kernel oops. This fixes CVE-2015-4167. Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no> Signed-off-by: Jan Kara <jack@suse.cz> [Use make_bad_inode() instead of branching due to older implementation.] Signed-off-by: Chas Williams <3chas3@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01x86/nmi/64: Use DF to avoid userspace RSP confusing nested NMI detectionAndy Lutomirski
commit 810bc075f78ff2c221536eb3008eac6a492dba2d upstream. We have a tricky bug in the nested NMI code: if we see RSP pointing to the NMI stack on NMI entry from kernel mode, we assume that we are executing a nested NMI. This isn't quite true. A malicious userspace program can point RSP at the NMI stack, issue SYSCALL, and arrange for an NMI to happen while RSP is still pointing at the NMI stack. Fix it with a sneaky trick. Set DF in the region of code that the RSP check is intended to detect. IRET will clear DF atomically. ( Note: other than paravirt, there's little need for all this complexity. We could check RIP instead of RSP. ) Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01x86/nmi/64: Reorder nested NMI checksAndy Lutomirski
commit a27507ca2d796cfa8d907de31ad730359c8a6d06 upstream. Check the repeat_nmi .. end_repeat_nmi special case first. The next patch will rework the RSP check and, as a side effect, the RSP check will no longer detect repeat_nmi .. end_repeat_nmi, so we'll need this ordering of the checks. Note: this is more subtle than it appears. The check for repeat_nmi .. end_repeat_nmi jumps straight out of the NMI code instead of adjusting the "iret" frame to force a repeat. This is necessary, because the code between repeat_nmi and end_repeat_nmi sets "NMI executing" and then writes to the "iret" frame itself. If a nested NMI comes in and modifies the "iret" frame while repeat_nmi is also modifying it, we'll end up with garbage. The old code got this right, as does the new code, but the new code is a bit more explicit. If we were to move the check right after the "NMI executing" check, then we'd get it wrong and have random crashes. ( Because the "NMI executing" check would jump to the code that would modify the "iret" frame without checking if the interrupted NMI was currently modifying it. ) Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01x86/nmi/64: Improve nested NMI commentsAndy Lutomirski
commit 0b22930ebad563ae97ff3f8d7b9f12060b4c6e6b upstream. I found the nested NMI documentation to be difficult to follow. Improve the comments. Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01x86/nmi/64: Switch stacks on userspace NMI entryAndy Lutomirski
commit 9b6e6a8334d56354853f9c255d1395c2ba570e0a upstream. Returning to userspace is tricky: IRET can fail, and ESPFIX can rearrange the stack prior to IRET. The NMI nesting fixup relies on a precise stack layout and atomic IRET. Rather than trying to teach the NMI nesting fixup to handle ESPFIX and failed IRET, punt: run NMIs that came from user mode on the normal kernel stack. This will make some nested NMIs visible to C code, but the C code is okay with that. As a side effect, this should speed up perf: it eliminates an RDMSR when NMIs come from user mode. Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01x86/nmi/64: Remove asm code that saves CR2Andy Lutomirski
commit 0e181bb58143cb4a2e8f01c281b0816cd0e4798e upstream. Now that do_nmi saves CR2, we don't need to save it in asm. Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01x86/nmi: Enable nested do_nmi() handling for 64-bit kernelsAndy Lutomirski
commit 9d05041679904b12c12421cbcf9cb5f4860a8d7b upstream. 32-bit kernels handle nested NMIs in C. Enable the exact same handling on 64-bit kernels as well. This isn't currently necessary, but it will become necessary once the asm code starts allowing limited nesting. Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01Revert "iio: bmg160: IIO_BUFFER and IIO_TRIGGERED_BUFFER are required"Markus Pargmann
This reverts commit 279c039ca63acbd69e69d6d7ddfed50346fb2185 which was commit 06d2f6ca5a38abe92f1f3a132b331eee773868c3 upstream as it should not have been applied. Reported-by: Luis Henriques <luis.henriques@canonical.com> Cc: Markus Pargmann <mpa@pengutronix.de> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01net: gso: use feature flag argument in all protocol gso handlersFlorian Westphal
[ Upstream commit 1e16aa3ddf863c6b9f37eddf52503230a62dedb3 ] skb_gso_segment() has a 'features' argument representing offload features available to the output path. A few handlers, e.g. GRE, instead re-fetch the features of skb->dev and use those instead of the provided ones when handing encapsulation/tunnels. Depending on dev->hw_enc_features of the output device skb_gso_segment() can then return NULL even when the caller has disabled all GSO feature bits, as segmentation of inner header thinks device will take care of segmentation. This e.g. affects the tbf scheduler, which will silently drop GRE-encap GSO skbs that did not fit the remaining token quota as the segmentation does not work when device supports corresponding hw offload capabilities. Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> [jay.vosburgh: backported to 3.14. ] Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01bna: fix interrupts storm caused by erroneous packetsIvan Vecera
[ Upstream commit ade4dc3e616e33c80d7e62855fe1b6f9895bc7c3 ] The commit "e29aa33 bna: Enable Multi Buffer RX" moved packets counter increment from the beginning of the NAPI processing loop after the check for erroneous packets so they are never accounted. This counter is used to inform firmware about number of processed completions (packets). As these packets are never acked the firmware fires IRQs for them again and again. Fixes: e29aa33 ("bna: Enable Multi Buffer RX") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01udp: fix dst races with multicast early demuxEric Dumazet
[ Upstream commit 10e2eb878f3ca07ac2f05fa5ca5e6c4c9174a27a ] Multicast dst are not cached. They carry DST_NOCACHE. As mentioned in commit f8864972126899 ("ipv4: fix dst race in sk_dst_get()"), these dst need special care before caching them into a socket. Caching them is allowed only if their refcnt was not 0, ie we must use atomic_inc_not_zero() Also, we must use READ_ONCE() to fetch sk->sk_rx_dst, as mentioned in commit d0c294c53a771 ("tcp: prevent fetching dst twice in early demux code") Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux") Tested-by: Gregory Hoggarth <Gregory.Hoggarth@alliedtelesis.co.nz> Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Gregory Hoggarth <Gregory.Hoggarth@alliedtelesis.co.nz> Reported-by: Alex Gartrell <agartrell@fb.com> Cc: Michal Kubeček <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01rds: fix an integer overflow test in rds_info_getsockopt()Dan Carpenter
[ Upstream commit 468b732b6f76b138c0926eadf38ac88467dcd271 ] "len" is a signed integer. We check that len is not negative, so it goes from zero to INT_MAX. PAGE_SIZE is unsigned long so the comparison is type promoted to unsigned long. ULONG_MAX - 4095 is a higher than INT_MAX so the condition can never be true. I don't know if this is harmful but it seems safe to limit "len" to INT_MAX - 4095. Fixes: a8c879a7ee98 ('RDS: Info and stats') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01packet: missing dev_put() in packet_do_bind()Lars Westerhoff
[ Upstream commit 158cd4af8dedbda0d612d448c724c715d0dda649 ] When binding a PF_PACKET socket, the use count of the bound interface is always increased with dev_hold in dev_get_by_{index,name}. However, when rebound with the same protocol and device as in the previous bind the use count of the interface was not decreased. Ultimately, this caused the deletion of the interface to fail with the following message: unregister_netdevice: waiting for dummy0 to become free. Usage count = 1 This patch moves the dev_put out of the conditional part that was only executed when either the protocol or device changed on a bind. Fixes: 902fefb82ef7 ('packet: improve socket create/bind latency in some cases') Signed-off-by: Lars Westerhoff <lars.westerhoff@newtec.eu> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01fib_rules: fix fib rule dumps across multiple skbsWilson Kok
[ Upstream commit 41fc014332d91ee90c32840bf161f9685b7fbf2b ] dump_rules returns skb length and not error. But when family == AF_UNSPEC, the caller of dump_rules assumes that it returns an error. Hence, when family == AF_UNSPEC, we continue trying to dump on -EMSGSIZE errors resulting in incorrect dump idx carried between skbs belonging to the same dump. This results in fib rule dump always only dumping rules that fit into the first skb. This patch fixes dump_rules to return error so that we exit correctly and idx is correctly maintained between skbs that are part of the same dump. Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01openvswitch: Zero flows on allocation.Jesse Gross
[ Upstream commit ae5f2fb1d51fa128a460bcfbe3c56d7ab8bf6a43 ] When support for megaflows was introduced, OVS needed to start installing flows with a mask applied to them. Since masking is an expensive operation, OVS also had an optimization that would only take the parts of the flow keys that were covered by a non-zero mask. The values stored in the remaining pieces should not matter because they are masked out. While this works fine for the purposes of matching (which must always look at the mask), serialization to netlink can be problematic. Since the flow and the mask are serialized separately, the uninitialized portions of the flow can be encoded with whatever values happen to be present. In terms of functionality, this has little effect since these fields will be masked out by definition. However, it leaks kernel memory to userspace, which is a potential security vulnerability. It is also possible that other code paths could look at the masked key and get uninitialized data, although this does not currently appear to be an issue in practice. This removes the mask optimization for flows that are being installed. This was always intended to be the case as the mask optimizations were really targetting per-packet flow operations. Fixes: 03f0d916 ("openvswitch: Mega flow implementation") Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01sctp: fix race on protocol/netns initializationMarcelo Ricardo Leitner
[ Upstream commit 8e2d61e0aed2b7c4ecb35844fe07e0b2b762dee4 ] Consider sctp module is unloaded and is being requested because an user is creating a sctp socket. During initialization, sctp will add the new protocol type and then initialize pernet subsys: status = sctp_v4_protosw_init(); if (status) goto err_protosw_init; status = sctp_v6_protosw_init(); if (status) goto err_v6_protosw_init; status = register_pernet_subsys(&sctp_net_ops); The problem is that after those calls to sctp_v{4,6}_protosw_init(), it is possible for userspace to create SCTP sockets like if the module is already fully loaded. If that happens, one of the possible effects is that we will have readers for net->sctp.local_addr_list list earlier than expected and sctp_net_init() does not take precautions while dealing with that list, leading to a potential panic but not limited to that, as sctp_sock_init() will copy a bunch of blank/partially initialized values from net->sctp. The race happens like this: CPU 0 | CPU 1 socket() | __sock_create | socket() inet_create | __sock_create list_for_each_entry_rcu( | answer, &inetsw[sock->type], | list) { | inet_create /* no hits */ | if (unlikely(err)) { | ... | request_module() | /* socket creation is blocked | * the module is fully loaded | */ | sctp_init | sctp_v4_protosw_init | inet_register_protosw | list_add_rcu(&p->list, | last_perm); | | list_for_each_entry_rcu( | answer, &inetsw[sock->type], sctp_v6_protosw_init | list) { | /* hit, so assumes protocol | * is already loaded | */ | /* socket creation continues | * before netns is initialized | */ register_pernet_subsys | Simply inverting the initialization order between register_pernet_subsys() and sctp_v4_protosw_init() is not possible because register_pernet_subsys() will create a control sctp socket, so the protocol must be already visible by then. Deferring the socket creation to a work-queue is not good specially because we loose the ability to handle its errors. So, as suggested by Vlad, the fix is to split netns initialization in two moments: defaults and control socket, so that the defaults are already loaded by when we register the protocol, while control socket initialization is kept at the same moment it is today. Fixes: 4db67e808640 ("sctp: Make the address lists per network namespace") Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01netlink, mmap: transform mmap skb into full skb on tapsDaniel Borkmann
[ Upstream commit 1853c949646005b5959c483becde86608f548f24 ] Ken-ichirou reported that running netlink in mmap mode for receive in combination with nlmon will throw a NULL pointer dereference in __kfree_skb() on nlmon_xmit(), in my case I can also trigger an "unable to handle kernel paging request". The problem is the skb_clone() in __netlink_deliver_tap_skb() for skbs that are mmaped. I.e. the cloned skb doesn't have a destructor, whereas the mmap netlink skb has it pointed to netlink_skb_destructor(), set in the handler netlink_ring_setup_skb(). There, skb->head is being set to NULL, so that in such cases, __kfree_skb() doesn't perform a skb_release_data() via skb_release_all(), where skb->head is possibly being freed through kfree(head) into slab allocator, although netlink mmap skb->head points to the mmap buffer. Similarly, the same has to be done also for large netlink skbs where the data area is vmalloced. Therefore, as discussed, make a copy for these rather rare cases for now. This fixes the issue on my and Ken-ichirou's test-cases. Reference: http://thread.gmane.org/gmane.linux.network/371129 Fixes: bcbde0d449ed ("net: netlink: virtual tap device management") Reported-by: Ken-ichirou MATSUZAWA <chamaken@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Ken-ichirou MATSUZAWA <chamaken@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01net/ipv6: Correct PIM6 mrt_lock handlingRichard Laing
[ Upstream commit 25b4a44c19c83d98e8c0807a7ede07c1f28eab8b ] In the IPv6 multicast routing code the mrt_lock was not being released correctly in the MFC iterator, as a result adding or deleting a MIF would cause a hang because the mrt_lock could not be acquired. This fix is a copy of the code for the IPv4 case and ensures that the lock is released correctly. Signed-off-by: Richard Laing <richard.laing@alliedtelesis.co.nz> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01ipv6: fix exthdrs offload registration in out_rt pathDaniel Borkmann
[ Upstream commit e41b0bedba0293b9e1e8d1e8ed553104b9693656 ] We previously register IPPROTO_ROUTING offload under inet6_add_offload(), but in error path, we try to unregister it with inet_del_offload(). This doesn't seem correct, it should actually be inet6_del_offload(), also ipv6_exthdrs_offload_exit() from that commit seems rather incorrect (it also uses rthdr_offload twice), but it got removed entirely later on. Fixes: 3336288a9fea ("ipv6: Switch to using new offload infrastructure.") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01usbnet: Get EVENT_NO_RUNTIME_PM bit before it is clearedEugene Shatokhin
[ Upstream commit f50791ac1aca1ac1b0370d62397b43e9f831421a ] It is needed to check EVENT_NO_RUNTIME_PM bit of dev->flags in usbnet_stop(), but its value should be read before it is cleared when dev->flags is set to 0. The problem was spotted and the fix was provided by Oliver Neukum <oneukum@suse.de>. Signed-off-by: Eugene Shatokhin <eugene.shatokhin@rosalab.ru> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01ip6_gre: release cached dst on tunnel removalhuaibin Wang
[ Upstream commit d4257295ba1b389c693b79de857a96e4b7cd8ac0 ] When a tunnel is deleted, the cached dst entry should be released. This problem may prevent the removal of a netns (seen with a x-netns IPv6 gre tunnel): unregister_netdevice: waiting for lo to become free. Usage count = 3 CC: Dmitry Kozlov <xeb@mail.ru> Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: huaibin Wang <huaibin.wang@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01net/mlx4_core: Fix wrong index in propagating port change event to VFsJack Morgenstein
[ Upstream commit 1c1bf34951e8d17941bf708d1901c47e81b15d55 ] The port-change event processing in procedure mlx4_eq_int() uses "slave" as the vf_oper array index. Since the value of "slave" is the PF function index, the result is that the PF link state is used for deciding to propagate the event for all the VFs. The VF link state should be used, so the VF function index should be used here. Fixes: 948e306d7d64 ('net/mlx4: Add VF link state support') Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01netlink: don't hold mutex in rcu callback when releasing mmapd ringFlorian Westphal
[ Upstream commit 0470eb99b4721586ccac954faac3fa4472da0845 ] Kirill A. Shutemov says: This simple test-case trigers few locking asserts in kernel: int main(int argc, char **argv) { unsigned int block_size = 16 * 4096; struct nl_mmap_req req = { .nm_block_size = block_size, .nm_block_nr = 64, .nm_frame_size = 16384, .nm_frame_nr = 64 * block_size / 16384, }; unsigned int ring_size; int fd; fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC); if (setsockopt(fd, SOL_NETLINK, NETLINK_RX_RING, &req, sizeof(req)) < 0) exit(1); if (setsockopt(fd, SOL_NETLINK, NETLINK_TX_RING, &req, sizeof(req)) < 0) exit(1); ring_size = req.nm_block_nr * req.nm_block_size; mmap(NULL, 2 * ring_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); return 0; } +++ exited with 0 +++ BUG: sleeping function called from invalid context at /home/kas/git/public/linux-mm/kernel/locking/mutex.c:616 in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: init 3 locks held by init/1: #0: (reboot_mutex){+.+...}, at: [<ffffffff81080959>] SyS_reboot+0xa9/0x220 #1: ((reboot_notifier_list).rwsem){.+.+..}, at: [<ffffffff8107f379>] __blocking_notifier_call_chain+0x39/0x70 #2: (rcu_callback){......}, at: [<ffffffff810d32e0>] rcu_do_batch.isra.49+0x160/0x10c0 Preemption disabled at:[<ffffffff8145365f>] __delay+0xf/0x20 CPU: 1 PID: 1 Comm: init Not tainted 4.1.0-00009-gbddf4c4818e0 #253 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Debian-1.8.2-1 04/01/2014 ffff88017b3d8000 ffff88027bc03c38 ffffffff81929ceb 0000000000000102 0000000000000000 ffff88027bc03c68 ffffffff81085a9d 0000000000000002 ffffffff81ca2a20 0000000000000268 0000000000000000 ffff88027bc03c98 Call Trace: <IRQ> [<ffffffff81929ceb>] dump_stack+0x4f/0x7b [<ffffffff81085a9d>] ___might_sleep+0x16d/0x270 [<ffffffff81085bed>] __might_sleep+0x4d/0x90 [<ffffffff8192e96f>] mutex_lock_nested+0x2f/0x430 [<ffffffff81932fed>] ? _raw_spin_unlock_irqrestore+0x5d/0x80 [<ffffffff81464143>] ? __this_cpu_preempt_check+0x13/0x20 [<ffffffff8182fc3d>] netlink_set_ring+0x1ed/0x350 [<ffffffff8182e000>] ? netlink_undo_bind+0x70/0x70 [<ffffffff8182fe20>] netlink_sock_destruct+0x80/0x150 [<ffffffff817e484d>] __sk_free+0x1d/0x160 [<ffffffff817e49a9>] sk_free+0x19/0x20 [..] Cong Wang says: We can't hold mutex lock in a rcu callback, [..] Thomas Graf says: The socket should be dead at this point. It might be simpler to add a netlink_release_ring() function which doesn't require locking at all. Reported-by: "Kirill A. Shutemov" <kirill@shutemov.name> Diagnosed-by: Cong Wang <cwang@twopensource.com> Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01inet: frags: fix defragmented packet's IP header for af_packetEdward Hyunkoo Jee
[ Upstream commit 0848f6428ba3a2e42db124d41ac6f548655735bf ] When ip_frag_queue() computes positions, it assumes that the passed sk_buff does not contain L2 headers. However, when PACKET_FANOUT_FLAG_DEFRAG is used, IP reassembly functions can be called on outgoing packets that contain L2 headers. Also, IPv4 checksum is not corrected after reassembly. Fixes: 7736d33f4262 ("packet: Add pre-defragmentation support for ipv4 fanouts.") Signed-off-by: Edward Hyunkoo Jee <edjee@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Jerry Chu <hkchu@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01bonding: correct the MAC address for "follow" fail_over_mac policydingtianhong
[ Upstream commit a951bc1e6ba58f11df5ed5ddc41311e10f5fd20b ] The "follow" fail_over_mac policy is useful for multiport devices that either become confused or incur a performance penalty when multiple ports are programmed with the same MAC address, but the same MAC address still may happened by this steps for this policy: 1) echo +eth0 > /sys/class/net/bond0/bonding/slaves bond0 has the same mac address with eth0, it is MAC1. 2) echo +eth1 > /sys/class/net/bond0/bonding/slaves eth1 is backup, eth1 has MAC2. 3) ifconfig eth0 down eth1 became active slave, bond will swap MAC for eth0 and eth1, so eth1 has MAC1, and eth0 has MAC2. 4) ifconfig eth1 down there is no active slave, and eth1 still has MAC1, eth2 has MAC2. 5) ifconfig eth0 up the eth0 became active slave again, the bond set eth0 to MAC1. Something wrong here, then if you set eth1 up, the eth0 and eth1 will have the same MAC address, it will break this policy for ACTIVE_BACKUP mode. This patch will fix this problem by finding the old active slave and swap them MAC address before change active slave. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Tested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01bonding: fix destruction of bond with devices different from arphrd_etherNikolay Aleksandrov
[ Upstream commit 06f6d1094aa0992432b1e2a0920b0ee86ccd83bf ] When the bonding is being unloaded and the netdevice notifier is unregistered it executes NETDEV_UNREGISTER for each device which should remove the bond's proc entry but if the device enslaved is not of ARPHRD_ETHER type and is in front of the bonding, it may execute bond_release_and_destroy() first which would release the last slave and destroy the bond device leaving the proc entry and thus we will get the following error (with dynamic debug on for bond_netdev_event to see the events order): [ 908.963051] eql: event: 9 [ 908.963052] eql: IFF_SLAVE [ 908.963054] eql: event: 2 [ 908.963056] eql: IFF_SLAVE [ 908.963058] eql: event: 6 [ 908.963059] eql: IFF_SLAVE [ 908.963110] bond0: Releasing active interface eql [ 908.976168] bond0: Destroying bond bond0 [ 908.976266] bond0 (unregistering): Released all slaves [ 908.984097] ------------[ cut here ]------------ [ 908.984107] WARNING: CPU: 0 PID: 1787 at fs/proc/generic.c:575 remove_proc_entry+0x112/0x160() [ 908.984110] remove_proc_entry: removing non-empty directory 'net/bonding', leaking at least 'bond0' [ 908.984111] Modules linked in: bonding(-) eql(O) 9p nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev qxl drm_kms_helper snd_hda_codec_generic aesni_intel ttm aes_x86_64 glue_helper pcspkr lrw gf128mul ablk_helper cryptd snd_hda_intel virtio_console snd_hda_codec psmouse serio_raw snd_hwdep snd_hda_core 9pnet_virtio 9pnet evdev joydev drm virtio_balloon snd_pcm snd_timer snd soundcore i2c_piix4 i2c_core pvpanic acpi_cpufreq parport_pc parport processor thermal_sys button autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid hid sg sr_mod cdrom ata_generic virtio_blk virtio_net floppy ata_piix e1000 libata ehci_pci virtio_pci scsi_mod uhci_hcd ehci_hcd virtio_ring virtio usbcore usb_common [last unloaded: bonding] [ 908.984168] CPU: 0 PID: 1787 Comm: rmmod Tainted: G W O 4.2.0-rc2+ #8 [ 908.984170] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 908.984172] 0000000000000000 ffffffff81732d41 ffffffff81525b34 ffff8800358dfda8 [ 908.984175] ffffffff8106c521 ffff88003595af78 ffff88003595af40 ffff88003e3a4280 [ 908.984178] ffffffffa058d040 0000000000000000 ffffffff8106c59a ffffffff8172ebd0 [ 908.984181] Call Trace: [ 908.984188] [<ffffffff81525b34>] ? dump_stack+0x40/0x50 [ 908.984193] [<ffffffff8106c521>] ? warn_slowpath_common+0x81/0xb0 [ 908.984196] [<ffffffff8106c59a>] ? warn_slowpath_fmt+0x4a/0x50 [ 908.984199] [<ffffffff81218352>] ? remove_proc_entry+0x112/0x160 [ 908.984205] [<ffffffffa05850e6>] ? bond_destroy_proc_dir+0x26/0x30 [bonding] [ 908.984208] [<ffffffffa057540e>] ? bond_net_exit+0x8e/0xa0 [bonding] [ 908.984217] [<ffffffff8142f407>] ? ops_exit_list.isra.4+0x37/0x70 [ 908.984225] [<ffffffff8142f52d>] ? unregister_pernet_operations+0x8d/0xd0 [ 908.984228] [<ffffffff8142f58d>] ? unregister_pernet_subsys+0x1d/0x30 [ 908.984232] [<ffffffffa0585269>] ? bonding_exit+0x23/0xdba [bonding] [ 908.984236] [<ffffffff810e28ba>] ? SyS_delete_module+0x18a/0x250 [ 908.984241] [<ffffffff81086f99>] ? task_work_run+0x89/0xc0 [ 908.984244] [<ffffffff8152b732>] ? entry_SYSCALL_64_fastpath+0x16/0x75 [ 908.984247] ---[ end trace 7c006ed4abbef24b ]--- Thus remove the proc entry manually if bond_release_and_destroy() is used. Because of the checks in bond_remove_proc_entry() it's not a problem for a bond device to change namespaces (the bug fixed by the Fixes commit) but since commit f9399814927ad ("bonding: Don't allow bond devices to change network namespaces.") that can't happen anyway. Reported-by: Carol Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: a64d49c3dd50 ("bonding: Manage /proc/net/bonding/ entries from the netdev events") Tested-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01ipv6: lock socket in ip6_datagram_connect()Eric Dumazet
[ Upstream commit 03645a11a570d52e70631838cb786eb4253eb463 ] ip6_datagram_connect() is doing a lot of socket changes without socket being locked. This looks wrong, at least for udp_lib_rehash() which could corrupt lists because of concurrent udp_sk(sk)->udp_portaddr_hash accesses. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01isdn/gigaset: reset tty->receive_room when attaching ser_gigasetTilman Schmidt
[ Upstream commit fd98e9419d8d622a4de91f76b306af6aa627aa9c ] Commit 79901317ce80 ("n_tty: Don't flush buffer when closing ldisc"), first merged in kernel release 3.10, caused the following regression in the Gigaset M101 driver: Before that commit, when closing the N_TTY line discipline in preparation to switching to N_GIGASET_M101, receive_room would be reset to a non-zero value by the call to n_tty_flush_buffer() in n_tty's close method. With the removal of that call, receive_room might be left at zero, blocking data reception on the serial line. The present patch fixes that regression by setting receive_room to an appropriate value in the ldisc open method. Fixes: 79901317ce80 ("n_tty: Don't flush buffer when closing ldisc") Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01bridge: mdb: fix double add notificationNikolay Aleksandrov
[ Upstream commit 5ebc784625ea68a9570d1f70557e7932988cd1b4 ] Since the mdb add/del code was introduced there have been 2 br_mdb_notify calls when doing br_mdb_add() resulting in 2 notifications on each add. Example: Command: bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent Before patch: root@debian:~# bridge monitor all [MDB]dev br0 port eth1 grp 239.0.0.1 permanent [MDB]dev br0 port eth1 grp 239.0.0.1 permanent After patch: root@debian:~# bridge monitor all [MDB]dev br0 port eth1 grp 239.0.0.1 permanent Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: cfd567543590 ("bridge: add support of adding and deleting mdb entries") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01net: Fix skb_set_peeked use-after-free bugHerbert Xu
[ Upstream commit a0a2a6602496a45ae838a96db8b8173794b5d398 ] The commit 738ac1ebb96d02e0d23bc320302a6ea94c612dec ("net: Clone skb before setting peeked flag") introduced a use-after-free bug in skb_recv_datagram. This is because skb_set_peeked may create a new skb and free the existing one. As it stands the caller will continue to use the old freed skb. This patch fixes it by making skb_set_peeked return the new skb (or the old one if unchanged). Fixes: 738ac1ebb96d ("net: Clone skb before setting peeked flag") Reported-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Brenden Blanco <bblanco@plumgrid.com> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01net: Fix skb csum races when peekingHerbert Xu
[ Upstream commit 89c22d8c3b278212eef6a8cc66b570bc840a6f5a ] When we calculate the checksum on the recv path, we store the result in the skb as an optimisation in case we need the checksum again down the line. This is in fact bogus for the MSG_PEEK case as this is done without any locking. So multiple threads can peek and then store the result to the same skb, potentially resulting in bogus skb states. This patch fixes this by only storing the result if the skb is not shared. This preserves the optimisations for the few cases where it can be done safely due to locking or other reasons, e.g., SIOCINQ. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01net: Clone skb before setting peeked flagHerbert Xu
[ Upstream commit 738ac1ebb96d02e0d23bc320302a6ea94c612dec ] Shared skbs must not be modified and this is crucial for broadcast and/or multicast paths where we use it as an optimisation to avoid unnecessary cloning. The function skb_recv_datagram breaks this rule by setting peeked without cloning the skb first. This causes funky races which leads to double-free. This patch fixes this by cloning the skb and replacing the skb in the list when setting skb->peeked. Fixes: a59322be07c9 ("[UDP]: Only increment counter on first peek/recv") Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01net: call rcu_read_lock early in process_backlogJulian Anastasov
[ Upstream commit 2c17d27c36dcce2b6bf689f41a46b9e909877c21 ] Incoming packet should be either in backlog queue or in RCU read-side section. Otherwise, the final sequence of flush_backlog() and synchronize_net() may miss packets that can run without device reference: CPU 1 CPU 2 skb->dev: no reference process_backlog:__skb_dequeue process_backlog:local_irq_enable on_each_cpu for flush_backlog => IPI(hardirq): flush_backlog - packet not found in backlog CPU delayed ... synchronize_net - no ongoing RCU read-side sections netdev_run_todo, rcu_barrier: no ongoing callbacks __netif_receive_skb_core:rcu_read_lock - too late free dev process packet for freed dev Fixes: 6e583ce5242f ("net: eliminate refcounting in backlog queue") Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01net: do not process device backlog during unregistrationJulian Anastasov
[ Upstream commit e9e4dd3267d0c5234c5c0f47440456b10875dec9 ] commit 381c759d9916 ("ipv4: Avoid crashing in ip_error") fixes a problem where processed packet comes from device with destroyed inetdev (dev->ip_ptr). This is not expected because inetdev_destroy is called in NETDEV_UNREGISTER phase and packets should not be processed after dev_close_many() and synchronize_net(). Above fix is still required because inetdev_destroy can be called for other reasons. But it shows the real problem: backlog can keep packets for long time and they do not hold reference to device. Such packets are then delivered to upper levels at the same time when device is unregistered. Calling flush_backlog after NETDEV_UNREGISTER_FINAL still accounts all packets from backlog but before that some packets continue to be delivered to upper levels long after the synchronize_net call which is supposed to wait the last ones. Also, as Eric pointed out, processed packets, mostly from other devices, can continue to add new packets to backlog. Fix the problem by moving flush_backlog early, after the device driver is stopped and before the synchronize_net() call. Then use netif_running check to make sure we do not add more packets to backlog. We have to do it in enqueue_to_backlog context when the local IRQ is disabled. As result, after the flush_backlog and synchronize_net sequence all packets should be accounted. Thanks to Eric W. Biederman for the test script and his valuable feedback! Reported-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Fixes: 6e583ce5242f ("net: eliminate refcounting in backlog queue") Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01net: pktgen: fix race between pktgen_thread_worker() and kthread_stop()Oleg Nesterov
[ Upstream commit fecdf8be2d91e04b0a9a4f79ff06499a36f5d14f ] pktgen_thread_worker() is obviously racy, kthread_stop() can come between the kthread_should_stop() check and set_current_state(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jan Stancek <jstancek@redhat.com> Reported-by: Marcelo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01bridge: mdb: zero out the local br_ip variable before useNikolay Aleksandrov
[ Upstream commit f1158b74e54f2e2462ba5e2f45a118246d9d5b43 ] Since commit b0e9a30dd669 ("bridge: Add vlan id to multicast groups") there's a check in br_ip_equal() for a matching vlan id, but the mdb functions were not modified to use (or at least zero it) so when an entry was added it would have a garbage vlan id (from the local br_ip variable in __br_mdb_add/del) and this would prevent it from being matched and also deleted. So zero out the whole local ip var to protect ourselves from future changes and also to fix the current bug, since there's no vlan id support in the mdb uapi - use always vlan id 0. Example before patch: root@debian:~# bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb del dev br0 port eth1 grp 239.0.0.1 permanent RTNETLINK answers: Invalid argument After patch: root@debian:~# bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb del dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Fixes: b0e9a30dd669 ("bridge: Add vlan id to multicast groups") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01net/tipc: initialize security state for new connection socketStephen Smalley
[ Upstream commit fdd75ea8df370f206a8163786e7470c1277a5064 ] Calling connect() with an AF_TIPC socket would trigger a series of error messages from SELinux along the lines of: SELinux: Invalid class 0 type=AVC msg=audit(1434126658.487:34500): avc: denied { <unprintable> } for pid=292 comm="kworker/u16:5" scontext=system_u:system_r:kernel_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=<unprintable> permissive=0 This was due to a failure to initialize the security state of the new connection sock by the tipc code, leaving it with junk in the security class field and an unlabeled secid. Add a call to security_sk_clone() to inherit the security state from the parent socket. Reported-by: Tim Shearer <tim.shearer@overturenetworks.com> Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01ip_tunnel: fix ipv4 pmtu check to honor inner ip header dfTimo Teräs
[ Upstream commit fc24f2b2094366da8786f59f2606307e934cea17 ] Frag needed should be sent only if the inner header asked to not fragment. Currently fragmentation is broken if the tunnel has df set, but df was not asked in the original packet. The tunnel's df needs to be still checked to update internally the pmtu cache. Commit 23a3647bc4f93bac broke it, and this commit fixes the ipv4 df check back to the way it was. Fixes: 23a3647bc4f93bac ("ip_tunnels: Use skb-len to PMTU check.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01rtnetlink: verify IFLA_VF_INFO attributes before passing them to driverDaniel Borkmann
[ Upstream commit 4f7d2cdfdde71ffe962399b7020c674050329423 ] Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01net: graceful exit from netif_alloc_netdev_queues()Eric Dumazet
[ Upstream commit d339727c2b1a10f25e6636670ab6e1841170e328 ] User space can crash kernel with ip link add ifb10 numtxqueues 100000 type ifb We must replace a BUG_ON() by proper test and return -EINVAL for crazy values. Fixes: 60877a32bce00 ("net: allow large number of tx queues") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01ipv6: Make MLD packets to only be processed locallyAngga
[ Upstream commit 4c938d22c88a9ddccc8c55a85e0430e9c62b1ac5 ] Before commit daad151263cf ("ipv6: Make ipv6_is_mld() inline and use it from ip6_mc_input().") MLD packets were only processed locally. After the change, a copy of MLD packet goes through ip6_mr_input, causing MRT6MSG_NOCACHE message to be generated to user space. Make MLD packet only processed locally. Fixes: daad151263cf ("ipv6: Make ipv6_is_mld() inline and use it from ip6_mc_input().") Signed-off-by: Hermin Anggawijaya <hermin.anggawijaya@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01hfs,hfsplus: cache pages correctly between bnode_create and bnode_freeHin-Tak Leung
commit 7cb74be6fd827e314f81df3c5889b87e4c87c569 upstream. Pages looked up by __hfs_bnode_create() (called by hfs_bnode_create() and hfs_bnode_find() for finding or creating pages corresponding to an inode) are immediately kmap()'ed and used (both read and write) and kunmap()'ed, and should not be page_cache_release()'ed until hfs_bnode_free(). This patch fixes a problem I first saw in July 2012: merely running "du" on a large hfsplus-mounted directory a few times on a reasonably loaded system would get the hfsplus driver all confused and complaining about B-tree inconsistencies, and generates a "BUG: Bad page state". Most recently, I can generate this problem on up-to-date Fedora 22 with shipped kernel 4.0.5, by running "du /" (="/" + "/home" + "/mnt" + other smaller mounts) and "du /mnt" simultaneously on two windows, where /mnt is a lightly-used QEMU VM image of the full Mac OS X 10.9: $ df -i / /home /mnt Filesystem Inodes IUsed IFree IUse% Mounted on /dev/mapper/fedora-root 3276800 551665 2725135 17% / /dev/mapper/fedora-home 52879360 716221 52163139 2% /home /dev/nbd0p2 4294967295 1387818 4293579477 1% /mnt After applying the patch, I was able to run "du /" (60+ times) and "du /mnt" (150+ times) continuously and simultaneously for 6+ hours. There are many reports of the hfsplus driver getting confused under load and generating "BUG: Bad page state" or other similar issues over the years. [1] The unpatched code [2] has always been wrong since it entered the kernel tree. The only reason why it gets away with it is that the kmap/memcpy/kunmap follow very quickly after the page_cache_release() so the kernel has not had a chance to reuse the memory for something else, most of the time. The current RW driver appears to have followed the design and development of the earlier read-only hfsplus driver [3], where-by version 0.1 (Dec 2001) had a B-tree node-centric approach to read_cache_page()/page_cache_release() per bnode_get()/bnode_put(), migrating towards version 0.2 (June 2002) of caching and releasing pages per inode extents. When the current RW code first entered the kernel [2] in 2005, there was an REF_PAGES conditional (and "//" commented out code) to switch between B-node centric paging to inode-centric paging. There was a mistake with the direction of one of the REF_PAGES conditionals in __hfs_bnode_create(). In a subsequent "remove debug code" commit [4], the read_cache_page()/page_cache_release() per bnode_get()/bnode_put() were removed, but a page_cache_release() was mistakenly left in (propagating the "REF_PAGES <-> !REF_PAGE" mistake), and the commented-out page_cache_release() in bnode_release() (which should be spanned by !REF_PAGES) was never enabled. References: [1]: Michael Fox, Apr 2013 http://www.spinics.net/lists/linux-fsdevel/msg63807.html ("hfsplus volume suddenly inaccessable after 'hfs: recoff %d too large'") Sasha Levin, Feb 2015 http://lkml.org/lkml/2015/2/20/85 ("use after free") https://bugs.launchpad.net/ubuntu/+source/linux/+bug/740814 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1027887 https://bugzilla.kernel.org/show_bug.cgi?id=42342 https://bugzilla.kernel.org/show_bug.cgi?id=63841 https://bugzilla.kernel.org/show_bug.cgi?id=78761 [2]: http://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/commit/\ fs/hfs/bnode.c?id=d1081202f1d0ee35ab0beb490da4b65d4bc763db commit d1081202f1d0ee35ab0beb490da4b65d4bc763db Author: Andrew Morton <akpm@osdl.org> Date: Wed Feb 25 16:17:36 2004 -0800 [PATCH] HFS rewrite http://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/commit/\ fs/hfsplus/bnode.c?id=91556682e0bf004d98a529bf829d339abb98bbbd commit 91556682e0bf004d98a529bf829d339abb98bbbd Author: Andrew Morton <akpm@osdl.org> Date: Wed Feb 25 16:17:48 2004 -0800 [PATCH] HFS+ support [3]: http://sourceforge.net/projects/linux-hfsplus/ http://sourceforge.net/projects/linux-hfsplus/files/Linux%202.4.x%20patch/hfsplus%200.1/ http://sourceforge.net/projects/linux-hfsplus/files/Linux%202.4.x%20patch/hfsplus%200.2/ http://linux-hfsplus.cvs.sourceforge.net/viewvc/linux-hfsplus/linux/\ fs/hfsplus/bnode.c?r1=1.4&r2=1.5 Date: Thu Jun 6 09:45:14 2002 +0000 Use buffer cache instead of page cache in bnode.c. Cache inode extents. [4]: http://git.kernel.org/cgit/linux/kernel/git/\ stable/linux-stable.git/commit/?id=a5e3985fa014029eb6795664c704953720cc7f7d commit a5e3985fa014029eb6795664c704953720cc7f7d Author: Roman Zippel <zippel@linux-m68k.org> Date: Tue Sep 6 15:18:47 2005 -0700 [PATCH] hfs: remove debug code Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Sergei Antonov <saproj@gmail.com> Reviewed-by: Anton Altaparmakov <anton@tuxera.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Sougata Santra <sougata@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01stmmac: troubleshoot unexpected bits in des0 & des1Alexey Brodkin
commit f1590670ce069eefeb93916391a67643e6ad1630 upstream. Current implementation of descriptor init procedure only takes care about setting/clearing ownership flag in "des0"/"des1" fields while it is perfectly possible to get unexpected bits set because of the following factors: [1] On driver probe underlying memory allocated with dma_alloc_coherent() might not be zeroed and so it will be filled with garbage. [2] During driver operation some bits could be set by SD/MMC controller (for example error flags etc). And unexpected and/or randomly set flags in "des0"/"des1" fields may lead to unpredictable behavior of GMAC DMA block. This change addresses both items above with: [1] Use of dma_zalloc_coherent() instead of simple dma_alloc_coherent() to make sure allocated memory is zeroed. That shouldn't affect performance because this allocation only happens once on driver probe. [2] Do explicit zeroing of both "des0" and "des1" fields of all buffer descriptors during initialization of DMA transfer. And while at it fixed identation of dma_free_coherent() counterpart as well. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: arc-linux-dev@synopsys.com Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01IB/mlx4: Use correct SL on AH query under RoCENoa Osherovich
commit 5e99b139f1b68acd65e36515ca347b03856dfb5a upstream. The mlx4 IB driver implementation for ib_query_ah used a wrong offset (28 instead of 29) when link type is Ethernet. Fixed to use the correct one. Fixes: fa417f7b520e ('IB/mlx4: Add support for IBoE') Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01IB/mlx4: Forbid using sysfs to change RoCE pkeysJack Morgenstein
commit 2b135db3e81301d0452e6aa107349abe67b097d6 upstream. The pkey mapping for RoCE must remain the default mapping: VFs: virtual index 0 = mapped to real index 0 (0xFFFF) All others indices: mapped to a real pkey index containing an invalid pkey. PF: virtual index i = real index i. Don't allow users to change these mappings using files found in sysfs. Fixes: c1e7e466120b ('IB/mlx4: Add iov directory in sysfs under the ib device') Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01IB/uverbs: Fix race between ib_uverbs_open and remove_oneYishai Hadas
commit 35d4a0b63dc0c6d1177d4f532a9deae958f0662c upstream. Fixes: 2a72f212263701b927559f6850446421d5906c41 ("IB/uverbs: Remove dev_table") Before this commit there was a device look-up table that was protected by a spin_lock used by ib_uverbs_open and by ib_uverbs_remove_one. When it was dropped and container_of was used instead, it enabled the race with remove_one as dev might be freed just after: dev = container_of(inode->i_cdev, struct ib_uverbs_device, cdev) but before the kref_get. In addition, this buggy patch added some dead code as container_of(x,y,z) can never be NULL and so dev can never be NULL. As a result the comment above ib_uverbs_open saying "the open method will either immediately run -ENXIO" is wrong as it can never happen. The solution follows Jason Gunthorpe suggestion from below URL: https://www.mail-archive.com/linux-rdma@vger.kernel.org/msg25692.html cdev will hold a kref on the parent (the containing structure, ib_uverbs_device) and only when that kref is released it is guaranteed that open will never be called again. In addition, fixes the active count scheme to use an atomic not a kref to prevent WARN_ON as pointed by above comment from Jason. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01IB/uverbs: reject invalid or unknown opcodesChristoph Hellwig
commit b632ffa7cee439ba5dce3b3bc4a5cbe2b3e20133 upstream. We have many WR opcodes that are only supported in kernel space and/or require optional information to be copied into the WR structure. Reject all those not explicitly handled so that we can't pass invalid information to drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01IB/qib: Change lkey table allocation to support more MRsMike Marciniszyn
commit d6f1c17e162b2a11e708f28fa93f2f79c164b442 upstream. The lkey table is allocated with with a get_user_pages() with an order based on a number of index bits from a module parameter. The underlying kernel code cannot allocate that many contiguous pages. There is no reason the underlying memory needs to be physically contiguous. This patch: - switches the allocation/deallocation to vmalloc/vfree - caps the number of bits to 23 to insure at least 1 generation bit o this matches the module parameter description Reviewed-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-16 12:49:04 +0000