summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-14block, bfq: NULL out the bic when it's no longer validDouglas Anderson
commit dbc3117d4ca9e17819ac73501e914b8422686750 upstream. In reboot tests on several devices we were seeing a "use after free" when slub_debug or KASAN was enabled. The kernel complained about: Unable to handle kernel paging request at virtual address 6b6b6c2b ...which is a classic sign of use after free under slub_debug. The stack crawl in kgdb looked like: 0 test_bit (addr=<optimized out>, nr=<optimized out>) 1 bfq_bfqq_busy (bfqq=<optimized out>) 2 bfq_select_queue (bfqd=<optimized out>) 3 __bfq_dispatch_request (hctx=<optimized out>) 4 bfq_dispatch_request (hctx=<optimized out>) 5 0xc056ef00 in blk_mq_do_dispatch_sched (hctx=0xed249440) 6 0xc056f728 in blk_mq_sched_dispatch_requests (hctx=0xed249440) 7 0xc0568d24 in __blk_mq_run_hw_queue (hctx=0xed249440) 8 0xc0568d94 in blk_mq_run_work_fn (work=<optimized out>) 9 0xc024c5c4 in process_one_work (worker=0xec6d4640, work=0xed249480) 10 0xc024cff4 in worker_thread (__worker=0xec6d4640) Digging in kgdb, it could be found that, though bfqq looked fine, bfqq->bic had been freed. Through further digging, I postulated that perhaps it is illegal to access a "bic" (AKA an "icq") after bfq_exit_icq() had been called because the "bic" can be freed at some point in time after this call is made. I confirmed that there certainly were cases where the exact crashing code path would access the "bic" after bfq_exit_icq() had been called. Sspecifically I set the "bfqq->bic" to (void *)0x7 and saw that the bic was 0x7 at the time of the crash. To understand a bit more about why this crash was fairly uncommon (I saw it only once in a few hundred reboots), you can see that much of the time bfq_exit_icq_fbqq() fully frees the bfqq and thus it can't access the ->bic anymore. The only case it doesn't is if bfq_put_queue() sees a reference still held. However, even in the case when bfqq isn't freed, the crash is still rare. Why? I tracked what happened to the "bic" after the exit routine. It doesn't get freed right away. Rather, put_io_context_active() eventually called put_io_context() which queued up freeing on a workqueue. The freeing then actually happened later than that through call_rcu(). Despite all these delays, some extra debugging showed that all the hoops could be jumped through in time and the memory could be freed causing the original crash. Phew! To make a long story short, assuming it truly is illegal to access an icq after the "exit_icq" callback is finished, this patch is needed. Cc: stable@vger.kernel.org Reviewed-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14ALSA: hda/realtek - Headphone Mic can't record after S3Kailang Yang
commit d07a9a4f66e944fcc900812cbc2f6817bde6a43d upstream. Dell headset mode platform with ALC236. It doesn't recording after system resume from S3. S3 mode was deep. s2idle was not has this issue. S3 deep will cut of codec power. So, the register will back to default after resume back. This patch will solve this issue. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14ALSA: usb-audio: Fix parse of UAC2 Extension UnitsTakashi Iwai
commit ca95c7bf3d29716916baccdc77c3c2284b703069 upstream. Extension Unit (XU) is used to have a compatible layout with Processing Unit (PU) on UAC1, and the usb-audio driver code assumed it for parsing the descriptors. Meanwhile, on UAC2, XU became slightly incompatible with PU; namely, XU has a one-byte bmControls bitmap while PU has two bytes bmControls bitmap. This incompatibility results in the read of a wrong address for the last iExtension field, which ended up with an incorrect string for the mixer element name, as recently reported for Focusrite Scarlett 18i20 device. This patch corrects this misalignment by introducing a couple of new macros and calling them depending on the descriptor type. Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0") Reported-by: Stefan Sauer <ensonic@hora-obscura.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14media: stv0297: fix frequency range limitMauro Carvalho Chehab
commit b09a2ab2baeb36bf7ef7780405ad172281741c7c upstream. There was a typo at the lower frequency limit for a DVB-C card, causing the driver to fail while tuning channels at the VHF range. https://bugzilla.kernel.org/show_bug.cgi?id=202083 Fixes: f1b1eabff0eb ("media: dvb: represent min/max/step/tolerance freqs in Hz") Reported-by: Ari Kohtamäki <ari.kohtamaki@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14udf: Fix incorrect final NOT_ALLOCATED (hole) extent lengthSteven J. Magnani
commit fa33cdbf3eceb0206a4f844fe91aeebcf6ff2b7a upstream. In some cases, using the 'truncate' command to extend a UDF file results in a mismatch between the length of the file's extents (specifically, due to incorrect length of the final NOT_ALLOCATED extent) and the information (file) length. The discrepancy can prevent other operating systems (i.e., Windows 10) from opening the file. Two particular errors have been observed when extending a file: 1. The final extent is larger than it should be, having been rounded up to a multiple of the block size. B. The final extent is not shorter than it should be, due to not having been updated when the file's information length was increased. [JK: simplified udf_do_extend_final_block(), fixed up some types] Fixes: 2c948b3f86e5 ("udf: Avoid IO in udf_clear_inode") CC: stable@vger.kernel.org Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Link: https://lore.kernel.org/r/1561948775-5878-1-git-send-email-steve@digidescorp.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14fscrypt: don't set policy for a dead directoryHongjie Fang
commit 5858bdad4d0d0fc18bf29f34c3ac836e0b59441f upstream. The directory may have been removed when entering fscrypt_ioctl_set_policy(). If so, the empty_dir() check will return error for ext4 file system. ext4_rmdir() sets i_size = 0, then ext4_empty_dir() reports an error because 'inode->i_size < EXT4_DIR_REC_LEN(1) + EXT4_DIR_REC_LEN(2)'. If the fs is mounted with errors=panic, it will trigger a panic issue. Add the check IS_DEADDIR() to fix this problem. Fixes: 9bd8212f981e ("ext4 crypto: add encryption policy and password salt support") Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by: Hongjie Fang <hongjiefang@asrmicro.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14net :sunrpc :clnt :Fix xps refcount imbalance on the error pathLin Yi
[ Upstream commit b96226148491505318228ac52624956bd98f9e0c ] rpc_clnt_add_xprt take a reference to struct rpc_xprt_switch, but forget to release it before return, may lead to a memory leak. Signed-off-by: Lin Yi <teroincn@163.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14NFS4: Only set creation opendata if O_CREATBenjamin Coddington
[ Upstream commit 909105199a682cb09c500acd443d34b182846c9c ] We can end up in nfs4_opendata_alloc during task exit, in which case current->fs has already been cleaned up. This leads to a crash in current_umask(). Fix this by only setting creation opendata if we are actually doing an open with O_CREAT. We can drop the check for NULL nfs4_open_createattrs, since O_CREAT will never be set for the recovery path. Suggested-by: Trond Myklebust <trondmy@hammerspace.com> Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge()Rasmus Villemoes
[ Upstream commit 48620e341659f6e4b978ec229f6944dabe6df709 ] The comment is correct, but the code ends up moving the bits four places too far, into the VTUOp field. Fixes: 11ea809f1a74 (net: dsa: mv88e6xxx: support 256 databases) Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14quota: fix a problem about transfer quotayangerkun
[ Upstream commit c6d9c35d16f1bafd3fec64b865e569e48cbcb514 ] Run below script as root, dquot_add_space will return -EDQUOT since __dquot_transfer call dquot_add_space with flags=0, and dquot_add_space think it's a preallocation. Fix it by set flags as DQUOT_SPACE_WARN. mkfs.ext4 -O quota,project /dev/vdb mount -o prjquota /dev/vdb /mnt setquota -P 23 1 1 0 0 /dev/vdb dd if=/dev/zero of=/mnt/test-file bs=4K count=1 chattr -p 23 test-file Fixes: 7b9ca4c61bc2 ("quota: Reduce contention on dq_data_lock") Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14scsi: qedi: Check targetname while finding boot target informationNilesh Javali
[ Upstream commit 1ac3549ed58cdfdaf43bbf31ac260e2381cc0dae ] The kernel panic was observed during iSCSI discovery via offload with below call trace, [ 2115.646901] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2115.646909] IP: [<ffffffffacf7f0cc>] strncmp+0xc/0x60 [ 2115.646927] PGD 0 [ 2115.646932] Oops: 0000 [#1] SMP [ 2115.647107] CPU: 24 PID: 264 Comm: kworker/24:1 Kdump: loaded Tainted: G OE ------------ 3.10.0-957.el7.x86_64 #1 [ 2115.647133] Workqueue: slowpath-13:00. qed_slowpath_task [qed] [ 2115.647135] task: ffff8d66af80b0c0 ti: ffff8d66afb80000 task.ti: ffff8d66afb80000 [ 2115.647136] RIP: 0010:[<ffffffffacf7f0cc>] [<ffffffffacf7f0cc>] strncmp+0xc/0x60 [ 2115.647141] RSP: 0018:ffff8d66afb83c68 EFLAGS: 00010206 [ 2115.647143] RAX: 0000000000000001 RBX: 0000000000000007 RCX: 000000000000000a [ 2115.647144] RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffff8d632b3ba040 [ 2115.647145] RBP: ffff8d66afb83c68 R08: 0000000000000000 R09: 000000000000ffff [ 2115.647147] R10: 0000000000000007 R11: 0000000000000800 R12: ffff8d66a30007a0 [ 2115.647148] R13: ffff8d66747a3c10 R14: ffff8d632b3ba000 R15: ffff8d66747a32f8 [ 2115.647149] FS: 0000000000000000(0000) GS:ffff8d66aff00000(0000) knlGS:0000000000000000 [ 2115.647151] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2115.647152] CR2: 0000000000000000 CR3: 0000000509610000 CR4: 00000000007607e0 [ 2115.647153] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2115.647154] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2115.647155] PKRU: 00000000 [ 2115.647157] Call Trace: [ 2115.647165] [<ffffffffc0634cc5>] qedi_get_protocol_tlv_data+0x2c5/0x510 [qedi] [ 2115.647184] [<ffffffffc05968f5>] ? qed_mfw_process_tlv_req+0x245/0xbe0 [qed] [ 2115.647195] [<ffffffffc05496cb>] qed_mfw_fill_tlv_data+0x4b/0xb0 [qed] [ 2115.647206] [<ffffffffc0596911>] qed_mfw_process_tlv_req+0x261/0xbe0 [qed] [ 2115.647215] [<ffffffffacce0e8e>] ? dequeue_task_fair+0x41e/0x660 [ 2115.647221] [<ffffffffacc2a59e>] ? __switch_to+0xce/0x580 [ 2115.647230] [<ffffffffc0546013>] qed_slowpath_task+0xa3/0x160 [qed] [ 2115.647278] RIP [<ffffffffacf7f0cc>] strncmp+0xc/0x60 Fix kernel panic by validating the session targetname before providing TLV data and confirming the presence of boot targets. Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14net: lio_core: fix potential sign-extension overflow on large shiftColin Ian King
[ Upstream commit 9476274093a0e79b905f4cd6cf6d149f65e02c17 ] Left shifting the signed int value 1 by 31 bits has undefined behaviour and the shift amount oq_no can be as much as 63. Fix this by using BIT_ULL(oq_no) instead. Addresses-Coverity: ("Bad shift operation") Fixes: f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14ip6_tunnel: allow not to count pkts on tstats by passing dev as NULLXin Long
[ Upstream commit 6f6a8622057c92408930c31698394fae1557b188 ] A similar fix to Patch "ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL" is also needed by ip6_tunnel. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14drm: return -EFAULT if copy_to_user() failsDan Carpenter
[ Upstream commit 74b67efa8d7b4f90137f0ab9a80dd319da050350 ] The copy_from_user() function returns the number of bytes remaining to be copied but we want to return a negative error code. Otherwise the callers treat it as a successful copy. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190618131843.GA29463@mwanda Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14bnx2x: Check if transceiver implements DDM before accessMauro S. M. Rodrigues
[ Upstream commit cf18cecca911c0db96b868072665347efe6df46f ] Some transceivers may comply with SFF-8472 even though they do not implement the Digital Diagnostic Monitoring (DDM) interface described in the spec. The existence of such area is specified by the 6th bit of byte 92, set to 1 if implemented. Currently, without checking this bit, bnx2x fails trying to read sfp module's EEPROM with the follow message: ethtool -m enP5p1s0f1 Cannot get Module EEPROM data: Input/output error Because it fails to read the additional 256 bytes in which it is assumed to exist the DDM data. This issue was noticed using a Mellanox Passive DAC PN 01FT738. The EEPROM data was confirmed by Mellanox as correct and similar to other Passive DACs from other manufacturers. Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14md: fix for divide error in status_resyncMariusz Tkaczyk
[ Upstream commit 9642fa73d073527b0cbc337cc17a47d545d82cd2 ] Stopping external metadata arrays during resync/recovery causes retries, loop of interrupting and starting reconstruction, until it hit at good moment to stop completely. While these retries curr_mark_cnt can be small- especially on HDD drives, so subtraction result can be smaller than 0. However it is casted to uint without checking. As a result of it the status bar in /proc/mdstat while stopping is strange (it jumps between 0% and 99%). The real problem occurs here after commit 72deb455b5ec ("block: remove CONFIG_LBDAF"). Sector_div() macro has been changed, now the divisor is casted to uint32. For db = -8 the divisior(db/32-1) becomes 0. Check if db value can be really counted and replace these macro by div64_u64() inline. Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14mmc: core: complete HS400 before checking statusWolfram Sang
[ Upstream commit b0e370b95a3b231d0fb5d1958cce85ef57196fe6 ] We don't have a reproducible error case, yet our BSP team suggested that the mmc_switch_status() command in mmc_select_hs400() should come after the callback into the driver completing HS400 setup. It makes sense to me because we want the status of a fully setup HS400, so it will increase the reliability of the mmc_switch_status() command. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Fixes: ba6c7ac3a2f4 ("mmc: core: more fine-grained hooks for HS400 tuning") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14qmi_wwan: extend permitted QMAP mux_id value rangeReinhard Speyerer
[ Upstream commit 36815b416fa48766ac5a98e4b2dc3ebc5887222e ] Permit mux_id values up to 254 to be used in qmimux_register_device() for compatibility with ip(8) and the rmnet driver. Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14qmi_wwan: avoid RCU stalls on device disconnect when in QMAP modeReinhard Speyerer
[ Upstream commit a8fdde1cb830e560208af42b6c10750137f53eb3 ] Switch qmimux_unregister_device() and qmi_wwan_disconnect() to use unregister_netdevice_queue() and unregister_netdevice_many() instead of unregister_netdevice(). This avoids RCU stalls which have been observed on device disconnect in certain setups otherwise. Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14qmi_wwan: add support for QMAP padding in the RX pathReinhard Speyerer
[ Upstream commit 61356088ace1866a847a727d4d40da7bf00b67fc ] The QMAP code in the qmi_wwan driver is based on the CodeAurora GobiNet driver which does not process QMAP padding in the RX path correctly. Add support for QMAP padding to qmimux_rx_fixup() according to the description of the rmnet driver. Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14bpf, x64: fix stack layout of JITed bpf codeAlexei Starovoitov
[ Upstream commit fe8d9571dc50232b569242fac7ea6332a654f186 ] Since commit 177366bf7ceb the %rbp stopped pointing to %rbp of the previous stack frame. That broke frame pointer based stack unwinding. This commit is a partial revert of it. Note that the location of tail_call_cnt is fixed, since the verifier enforces MAX_BPF_STACK stack size for programs with tail calls. Fixes: 177366bf7ceb ("bpf: change x86 JITed program stack layout") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14bpf, devmap: Add missing RCU read lock on flushToshiaki Makita
[ Upstream commit 86723c8640633bee4b4588d3c7784ee7a0032f65 ] .ndo_xdp_xmit() assumes it is called under RCU. For example virtio_net uses RCU to detect it has setup the resources for tx. The assumption accidentally broke when introducing bulk queue in devmap. Fixes: 5d053f9da431 ("bpf: devmap prepare xdp frames for bulking") Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14bpf, devmap: Add missing bulk queue freeToshiaki Makita
[ Upstream commit edabf4d9dd905acd60048ea1579943801e3a4876 ] dev_map_free() forgot to free bulk queue when freeing its entries. Fixes: 5d053f9da431 ("bpf: devmap prepare xdp frames for bulking") Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14bpf, devmap: Fix premature entry free on destroying mapToshiaki Makita
[ Upstream commit d4dd153d551634683fccf8881f606fa9f3dfa1ef ] dev_map_free() waits for flush_needed bitmap to be empty in order to ensure all flush operations have completed before freeing its entries. However the corresponding clear_bit() was called before using the entries, so the entries could be used after free. All access to the entries needs to be done before clearing the bit. It seems commit a5e2da6e9787 ("bpf: netdev is never null in __dev_map_flush") accidentally changed the clear_bit() and memory access order. Note that the problem happens only in __dev_map_flush(), not in dev_map_flush_old(). dev_map_flush_old() is called only after nulling out the corresponding netdev_map entry, so dev_map_free() never frees the entry thus no such race happens there. Fixes: a5e2da6e9787 ("bpf: netdev is never null in __dev_map_flush") Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14mac80211: do not start any work during reconfigure flowNaftali Goldstein
[ Upstream commit f8891461a277ec0afc493fd30cd975a38048a038 ] It is not a good idea to try to perform any work (e.g. send an auth frame) during reconfigure flow. Prevent this from happening, and at the end of the reconfigure flow requeue all the works. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14mac80211: only warn once on chanctx_conf being NULLYibo Zhao
[ Upstream commit 563572340173865a9a356e6bb02579e6998a876d ] In multiple SSID cases, it takes time to prepare every AP interface to be ready in initializing phase. If a sta already knows everything it needs to join one of the APs and sends authentication to the AP which is not fully prepared at this point of time, AP's channel context could be NULL. As a result, warning message occurs. Even worse, if the AP is under attack via tools such as MDK3 and massive authentication requests are received in a very short time, console will be hung due to kernel warning messages. WARN_ON_ONCE() could be a better way for indicating warning messages without duplicate messages to flood the console. Johannes: We still need to address the underlying problem, but we don't really have a good handle on it yet. Suppress the worst side-effects for now. Signed-off-by: Zhi Chen <zhichen@codeaurora.org> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> [johannes: add note, change subject] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14ARM: davinci: da8xx: specify dma_coherent_mask for lcdcBartosz Golaszewski
[ Upstream commit 68f2515bb31a664ba3e2bc1eb78dd9f529b10067 ] The lcdc device is missing the dma_coherent_mask definition causing the following warning on da850-evm: da8xx_lcdc da8xx_lcdc.0: found Sharp_LK043T1DG01 panel ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/dma/mapping.c:247 dma_alloc_attrs+0xc8/0x110 Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.2.0-rc3-00077-g16d72dd4891f #18 Hardware name: DaVinci DA850/OMAP-L138/AM18x EVM [<c000fce8>] (unwind_backtrace) from [<c000d900>] (show_stack+0x10/0x14) [<c000d900>] (show_stack) from [<c001a4f8>] (__warn+0xec/0x114) [<c001a4f8>] (__warn) from [<c001a634>] (warn_slowpath_null+0x3c/0x48) [<c001a634>] (warn_slowpath_null) from [<c0065860>] (dma_alloc_attrs+0xc8/0x110) [<c0065860>] (dma_alloc_attrs) from [<c02820f8>] (fb_probe+0x228/0x5a8) [<c02820f8>] (fb_probe) from [<c02d3e9c>] (platform_drv_probe+0x48/0x9c) [<c02d3e9c>] (platform_drv_probe) from [<c02d221c>] (really_probe+0x1d8/0x2d4) [<c02d221c>] (really_probe) from [<c02d2474>] (driver_probe_device+0x5c/0x168) [<c02d2474>] (driver_probe_device) from [<c02d2728>] (device_driver_attach+0x58/0x60) [<c02d2728>] (device_driver_attach) from [<c02d27b0>] (__driver_attach+0x80/0xbc) [<c02d27b0>] (__driver_attach) from [<c02d047c>] (bus_for_each_dev+0x64/0xb4) [<c02d047c>] (bus_for_each_dev) from [<c02d1590>] (bus_add_driver+0xe4/0x1d8) [<c02d1590>] (bus_add_driver) from [<c02d301c>] (driver_register+0x78/0x10c) [<c02d301c>] (driver_register) from [<c000a5c0>] (do_one_initcall+0x48/0x1bc) [<c000a5c0>] (do_one_initcall) from [<c05cae6c>] (kernel_init_freeable+0x10c/0x1d8) [<c05cae6c>] (kernel_init_freeable) from [<c048a000>] (kernel_init+0x8/0xf4) [<c048a000>] (kernel_init) from [<c00090e0>] (ret_from_fork+0x14/0x34) Exception stack(0xc6837fb0 to 0xc6837ff8) 7fa0: 00000000 00000000 00000000 00000000 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ---[ end trace 8a8073511be81dd2 ]--- Add a 32-bit mask to the platform device's definition. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14ARM: davinci: da850-evm: call regulator_has_full_constraints()Bartosz Golaszewski
[ Upstream commit 0c0c9b5753cd04601b17de09da1ed2885a3b42fe ] The BB expander at 0x21 i2c bus 1 fails to probe on da850-evm because the board doesn't set has_full_constraints to true in the regulator API. Call regulator_has_full_constraints() at the end of board registration just like we do in da850-lcdk and da830-evm. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14mlxsw: spectrum: Disallow prio-tagged packets when PVID is removedIdo Schimmel
[ Upstream commit 4b14cc313f076c37b646cee06a85f0db59cf216c ] When PVID is removed from a bridge port, the Linux bridge drops both untagged and prio-tagged packets. Align mlxsw with this behavior. Fixes: 148f472da5db ("mlxsw: reg: Add the Switch Port Acceptable Frame Types register") Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14KVM: arm/arm64: vgic: Fix kvm_device leak in vgic_its_destroyDave Martin
[ Upstream commit 4729ec8c1e1145234aeeebad5d96d77f4ccbb00a ] kvm_device->destroy() seems to be supposed to free its kvm_device struct, but vgic_its_destroy() is not currently doing this, resulting in a memory leak, resulting in kmemleak reports such as the following: unreferenced object 0xffff800aeddfe280 (size 128): comm "qemu-system-aar", pid 13799, jiffies 4299827317 (age 1569.844s) [...] backtrace: [<00000000a08b80e2>] kmem_cache_alloc+0x178/0x208 [<00000000dcad2bd3>] kvm_vm_ioctl+0x350/0xbc0 Fix it. Cc: Andre Przywara <andre.przywara@arm.com> Fixes: 1085fdc68c60 ("KVM: arm64: vgic-its: Introduce new KVM ITS device") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14Input: imx_keypad - make sure keyboard can always wake up systemAnson Huang
[ Upstream commit ce9a53eb3dbca89e7ad86673d94ab886e9bea704 ] There are several scenarios that keyboard can NOT wake up system from suspend, e.g., if a keyboard is depressed between system device suspend phase and device noirq suspend phase, the keyboard ISR will be called and both keyboard depress and release interrupts will be disabled, then keyboard will no longer be able to wake up system. Another scenario would be, if a keyboard is kept depressed, and then system goes into suspend, the expected behavior would be when keyboard is released, system will be waked up, but current implementation can NOT achieve that, because both depress and release interrupts are disabled in ISR, and the event check is still in progress. To fix these issues, need to make sure keyboard's depress or release interrupt is enabled after noirq device suspend phase, this patch moves the suspend/resume callback to noirq suspend/resume phase, and enable the corresponding interrupt according to current keyboard status. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14riscv: Fix udelay in RV32.Nick Hu
[ Upstream commit d0e1f2110a5eeb6e410b2dd37d98bc5b30da7bc7 ] In RV32, udelay would delay the wrong cycle. When it shifts right "UDELAY_SHIFT" bits, it either delays 0 cycle or 1 cycle. It only works correctly in RV64. Because the 'ucycles' always needs to be 64 bits variable. Signed-off-by: Nick Hu <nickhu@andestech.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> [paul.walmsley@sifive.com: fixed minor spelling error] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14drm/vmwgfx: fix a warning due to missing dma_parmsQian Cai
[ Upstream commit 39916897cd815a0ee07ba1f6820cf88a63e459fc ] Booting up with DMA_API_DEBUG_SG=y generates a warning due to the driver forgot to set dma_parms appropriately. Set it just after vmw_dma_masks() in vmw_driver_load(). DMA-API: vmwgfx 0000:00:0f.0: mapping sg segment longer than device claims to support [len=2097152] [max=65536] WARNING: CPU: 2 PID: 261 at kernel/dma/debug.c:1232 debug_dma_map_sg+0x360/0x480 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018 RIP: 0010:debug_dma_map_sg+0x360/0x480 Call Trace: vmw_ttm_map_dma+0x3b1/0x5b0 [vmwgfx] vmw_bo_map_dma+0x25/0x30 [vmwgfx] vmw_otables_setup+0x2a8/0x750 [vmwgfx] vmw_request_device_late+0x78/0xc0 [vmwgfx] vmw_request_device+0xee/0x4e0 [vmwgfx] vmw_driver_load.cold+0x757/0xd84 [vmwgfx] drm_dev_register+0x1ff/0x340 [drm] drm_get_pci_dev+0x110/0x290 [drm] vmw_probe+0x15/0x20 [vmwgfx] local_pci_probe+0x7a/0xc0 pci_device_probe+0x1b9/0x290 really_probe+0x1b5/0x630 driver_probe_device+0xa3/0x1a0 device_driver_attach+0x94/0xa0 __driver_attach+0xdd/0x1c0 bus_for_each_dev+0xfe/0x150 driver_attach+0x2d/0x40 bus_add_driver+0x290/0x350 driver_register+0xdc/0x1d0 __pci_register_driver+0xda/0xf0 vmwgfx_init+0x34/0x1000 [vmwgfx] do_one_initcall+0xe5/0x40a do_init_module+0x10f/0x3a0 load_module+0x16a5/0x1a40 __se_sys_finit_module+0x183/0x1c0 __x64_sys_finit_module+0x43/0x50 do_syscall_64+0xc8/0x606 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: fb1d9738ca05 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU") Co-developed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14drm/vmwgfx: Honor the sg list segment size limitationThomas Hellstrom
[ Upstream commit bde15555ba61c7f664f40fd3c6fdbdb63f784c9b ] When building sg tables, honor the device sg list segment size limitation. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14s390/boot: disable address-of-packed-member warningHeiko Carstens
[ Upstream commit f9364df30420987e77599c4789ec0065c609a507 ] Get rid of gcc9 warnings like this: arch/s390/boot/ipl_report.c: In function 'find_bootdata_space': arch/s390/boot/ipl_report.c:42:26: warning: taking address of packed member of 'struct ipl_rb_components' may result in an unaligned pointer value [-Waddress-of-packed-member] 42 | for_each_rb_entry(comp, comps) | ^~~~~ This is effectively the s390 variant of commit 20c6c1890455 ("x86/boot: Disable the address-of-packed-member compiler warning"). Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14ARM: dts: am335x phytec boards: Fix cd-gpios active levelTeresa Remmet
[ Upstream commit 8a0098c05a272c9a68f6885e09755755b612459c ] Active level of the mmc1 cd gpio needs to be low instead of high. Fix PCM-953 and phyBOARD-WEGA. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14ibmvnic: Fix unchecked return codes of memory allocationsThomas Falcon
[ Upstream commit 7c940b1a5291e5069d561f5b8f0e51db6b7a259a ] The return values for these memory allocations are unchecked, which may cause an oops if the driver does not handle them after a failure. Fix by checking the function's return code. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14ibmvnic: Refresh device multicast list after resetThomas Falcon
[ Upstream commit be32a24372cf162e825332da1a7ccef058d4f20b ] It was observed that multicast packets were no longer received after a device reset. The fix is to resend the current multicast list to the backing device after recovery. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14ibmvnic: Do not close unopened driver during resetThomas Falcon
[ Upstream commit 1f94608b0ce141be5286dde31270590bdf35b86a ] Check driver state before halting it during a reset. If the driver is not running, do nothing. Otherwise, a request to deactivate a down link can cause an error and the reset will fail. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14net: phy: rename Asix Electronics PHY driverMichael Schmitz
[ Upstream commit a9520543b123bbd7275a0ab8d0375a5412683b41 ] [Resent to net instead of net-next - may clash with Anders Roxell's patch series addressing duplicate module names] Commit 31dd83b96641 ("net-next: phy: new Asix Electronics PHY driver") introduced a new PHY driver drivers/net/phy/asix.c that causes a module name conflict with a pre-existiting driver (drivers/net/usb/asix.c). The PHY driver is used by the X-Surf 100 ethernet card driver, and loaded by that driver via its PHY ID. A rename of the driver looks unproblematic. Rename PHY driver to ax88796b.c in order to resolve name conflict. Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Fixes: 31dd83b96641 ("net-next: phy: new Asix Electronics PHY driver") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14can: af_can: Fix error path of can_init()YueHaibing
[ Upstream commit c5a3aed1cd3152429348ee1fe5cdcca65fe901ce ] This patch add error path for can_init() to avoid possible crash if some error occurs. Fixes: 0d66548a10cb ("[CAN]: Add PF_CAN core module") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14can: m_can: implement errata "Needless activation of MRAF irq"Eugen Hristev
[ Upstream commit 3e82f2f34c930a2a0a9e69fdc2de2f2f1388b442 ] During frame reception while the MCAN is in Error Passive state and the Receive Error Counter has thevalue MCAN_ECR.REC = 127, it may happen that MCAN_IR.MRAF is set although there was no Message RAM access failure. If MCAN_IR.MRAF is enabled, an interrupt to the Host CPU is generated. Work around: The Message RAM Access Failure interrupt routine needs to check whether MCAN_ECR.RP = '1' and MCAN_ECR.REC = '127'. In this case, reset MCAN_IR.MRAF. No further action is required. This affects versions older than 3.2.0 Errata explained on Sama5d2 SoC which includes this hardware block: http://ww1.microchip.com/downloads/en/DeviceDoc/SAMA5D2-Family-Silicon-Errata-and-Data-Sheet-Clarification-DS80000803B.pdf chapter 6.2 Reproducibility: If 2 devices with m_can are connected back to back, configuring different bitrate on them will lead to interrupt storm on the receiving side, with error "Message RAM access failure occurred". Another way is to have a bad hardware connection. Bad wire connection can lead to this issue as well. This patch fixes the issue according to provided workaround. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14can: mcp251x: add support for mcp25625Sean Nyekjaer
[ Upstream commit 35b7fa4d07c43ad79b88e6462119e7140eae955c ] Fully compatible with mcp2515, the mcp25625 have integrated transceiver. This patch adds support for the mcp25625 to the existing mcp251x driver. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14dt-bindings: can: mcp251x: add mcp25625 supportSean Nyekjaer
[ Upstream commit 0df82dcd55832a99363ab7f9fab954fcacdac3ae ] Fully compatible with mcp2515, the mcp25625 have integrated transceiver. This patch add the mcp25625 to the device tree bindings documentation. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14soundwire: intel: set dai min and max channels correctlySrinivas Kandagatla
[ Upstream commit 39194128701bf2af9bbc420ffe6e3cb5d2c16061 ] Looks like there is a copy paste error. This patch fixes it! Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies()Takashi Iwai
[ Upstream commit 69ae4f6aac1578575126319d3f55550e7e440449 ] A few places in mwifiex_uap_parse_tail_ies() perform memcpy() unconditionally, which may lead to either buffer overflow or read over boundary. This patch addresses the issues by checking the read size and the destination size at each place more properly. Along with the fixes, the patch cleans up the code slightly by introducing a temporary variable for the token size, and unifies the error path with the standard goto statement. Reported-by: huangwen <huangwen@venustech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14iwlwifi: Fix double-free problems in iwl_req_fw_callback()Jia-Ju Bai
[ Upstream commit a8627176b0de7ba3f4524f641ddff4abf23ae4e4 ] In the error handling code of iwl_req_fw_callback(), iwl_dealloc_ucode() is called to free data. In iwl_drv_stop(), iwl_dealloc_ucode() is called again, which can cause double-free problems. To fix this bug, the call to iwl_dealloc_ucode() in iwl_req_fw_callback() is deleted. This bug is found by a runtime fuzzing tool named FIZZER written by us. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14mwifiex: Fix possible buffer overflows at parsing bss descriptorTakashi Iwai
[ Upstream commit 13ec7f10b87f5fc04c4ccbd491c94c7980236a74 ] mwifiex_update_bss_desc_with_ie() calls memcpy() unconditionally in a couple places without checking the destination size. Since the source is given from user-space, this may trigger a heap buffer overflow. Fix it by putting the length check before performing memcpy(). This fix addresses CVE-2019-3846. Reported-by: huangwen <huangwen@venustech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14mac80211: free peer keys before vif down in meshPradeep Kumar Chitrapu
[ Upstream commit 0112fa557c3bb3a002bc85760dc3761d737264d3 ] freeing peer keys after vif down is resulting in peer key uninstall to fail due to interface lookup failure. so fix that. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14mac80211: mesh: fix RCU warningThomas Pedersen
[ Upstream commit 551842446ed695641a00782cd118cbb064a416a1 ] ifmsh->csa is an RCU-protected pointer. The writer context in ieee80211_mesh_finish_csa() is already mutually exclusive with wdev->sdata.mtx, but the RCU checker did not know this. Use rcu_dereference_protected() to avoid a warning. fixes the following warning: [ 12.519089] ============================= [ 12.520042] WARNING: suspicious RCU usage [ 12.520652] 5.1.0-rc7-wt+ #16 Tainted: G W [ 12.521409] ----------------------------- [ 12.521972] net/mac80211/mesh.c:1223 suspicious rcu_dereference_check() usage! [ 12.522928] other info that might help us debug this: [ 12.523984] rcu_scheduler_active = 2, debug_locks = 1 [ 12.524855] 5 locks held by kworker/u8:2/152: [ 12.525438] #0: 00000000057be08c ((wq_completion)phy0){+.+.}, at: process_one_work+0x1a2/0x620 [ 12.526607] #1: 0000000059c6b07a ((work_completion)(&sdata->csa_finalize_work)){+.+.}, at: process_one_work+0x1a2/0x620 [ 12.528001] #2: 00000000f184ba7d (&wdev->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x2f/0x90 [ 12.529116] #3: 00000000831a1f54 (&local->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x47/0x90 [ 12.530233] #4: 00000000fd06f988 (&local->chanctx_mtx){+.+.}, at: ieee80211_csa_finalize_work+0x51/0x90 Signed-off-by: Thomas Pedersen <thomas@eero.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>