summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-06-02xen: add new Xen elfnote types and use them appropriatelyJeremy Fitzhardinge
Define recently added XEN_ELFNOTEs, and use them appropriately. Most significantly, this enables domain checkpointing (xm save -c). Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02xen: resume timers on all vcpusJeremy Fitzhardinge
On resume, the vcpu timer modes will not be restored. The timer infrastructure doesn't do this for us, since it assumes the cpus are offline. We can just poke the other vcpus into the right mode directly though. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02xen: restore vcpu_info mappingJeremy Fitzhardinge
If we're using vcpu_info mapping, then make sure its restored on all processors before relasing them from stop_machine. The only complication is that if this fails, we can't continue because we've already made assumptions that the mapping is available (baked in calls to the _direct versions of the functions, for example). Fortunately this can only happen with a 32-bit hypervisor, which may possibly run out of mapping space. On a 64-bit hypervisor, this is a non-issue. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02xen: avoid hypercalls when updating unpinned pud/pmdJeremy Fitzhardinge
When operating on an unpinned pagetable (ie, one under construction or destruction), it isn't necessary to use a hypercall to update a pud/pmd entry. Jan Beulich observed that a similar optimisation avoided many thousands of hypercalls while doing a kernel build. One tricky part is that early in the kernel boot there's no page structure, so we can't check to see if the page is pinned. In that case, we just always use the hypercall. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02xen: export get_phys_to_machineIngo Molnar
-tip testing found the following xen-console symbols trouble: ERROR: "get_phys_to_machine" [drivers/video/xen-fbfront.ko] undefined! ERROR: "get_phys_to_machine" [drivers/net/xen-netfront.ko] undefined! ERROR: "get_phys_to_machine" [drivers/input/xen-kbdfront.ko] undefined! with: http://redhat.com/~mingo/misc/config-Mon_Jun__2_12_25_13_CEST_2008.bad
2008-06-02CONFIG_PM_SLEEP fix: xen: fix compilation when CONFIG_PM_SLEEP is disabledJeremy Fitzhardinge
Xen save/restore depends on CONFIG_PM_SLEEP being set for device_power_up/down. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-29xen: fix "xen: implement save/restore"Ingo Molnar
-tip testing found the following build breakage: drivers/built-in.o: In function `xen_suspend': manage.c:(.text+0x4390f): undefined reference to `xen_console_resume' with this config: http://redhat.com/~mingo/misc/config-Thu_May_29_09_23_16_CEST_2008.bad i have bisected it down to: | commit 0e91398f2a5d4eb6b07df8115917d0d1cf3e9b58 | Author: Jeremy Fitzhardinge <jeremy@goop.org> | Date: Mon May 26 23:31:27 2008 +0100 | | xen: implement save/restore the problem is that drivers/xen/manage.c is built unconditionally if CONFIG_XEN is enabled and makes use of xen_suspend(), but drivers/char/hvc_xen.c, where the xen_suspend() method is implemented, is only build if CONFIG_HVC_XEN=y as well. i have solved this by providing a NOP implementation for xen_suspend() in the !CONFIG_HVC_XEN case. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-28xen: fix early bootup crash on native hardwareIngo Molnar
-tip tree auto-testing found the following early bootup hang: --------------> get_memcfg_from_srat: assigning address to rsdp RSD PTR v0 [Nvidia] BUG: Int 14: CR2 ffd00040 EDI 8092fbfe ESI ffd00040 EBP 80b0aee8 ESP 80b0aed0 EBX 000f76f0 EDX 0000000e ECX 00000003 EAX ffd00040 err 00000000 EIP 802c055a CS 00000060 flg 00010006 Stack: ffd00040 80bc78d0 80b0af6c 80b1dbfe 8093d8ba 00000008 80b42810 80b4ddb4 80b42842 00000000 80b0af1c 801079c8 808e724e 00000000 80b42871 802c0531 00000100 00000000 0003fff0 80b0af40 80129999 00040100 00040100 00000000 Pid: 0, comm: swapper Not tainted 2.6.26-rc4-sched-devel.git #570 [<802c055a>] ? strncmp+0x11/0x25 [<80b1dbfe>] ? get_memcfg_from_srat+0xb4/0x568 [<801079c8>] ? mcount_call+0x5/0x9 [<802c0531>] ? strcmp+0xa/0x22 [<80129999>] ? printk+0x38/0x3a [<80129999>] ? printk+0x38/0x3a [<8011b122>] ? memory_present+0x66/0x6f [<80b216b4>] ? setup_memory+0x13/0x40c [<80b16b47>] ? propagate_e820_map+0x80/0x97 [<80b1622a>] ? setup_arch+0x248/0x477 [<80129999>] ? printk+0x38/0x3a [<80b11759>] ? start_kernel+0x6e/0x2eb [<80b110fc>] ? i386_start_kernel+0xeb/0xf2 ======================= <------ with this config: http://redhat.com/~mingo/misc/config-Wed_May_28_01_33_33_CEST_2008.bad The thing is, the crash makes little sense at first sight. We crash on a benign-looking printk. The code around it got changed in -tip but checking those topic branches individually did not reproduce the bug. Bisection led to this commit: | d5edbc1f75420935b1ec7e65df10c8f81cea82de is first bad commit | commit d5edbc1f75420935b1ec7e65df10c8f81cea82de | Author: Jeremy Fitzhardinge <jeremy@goop.org> | Date: Mon May 26 23:31:22 2008 +0100 | | xen: add p2m mfn_list_list Which is somewhat surprising, as on native hardware Xen client side should have little to no side-effects. After some head scratching, it turns out the following happened: randconfig enabled the following Xen options: CONFIG_XEN=y CONFIG_XEN_MAX_DOMAIN_MEMORY=8 # CONFIG_XEN_BLKDEV_FRONTEND is not set # CONFIG_XEN_NETDEV_FRONTEND is not set CONFIG_HVC_XEN=y # CONFIG_XEN_BALLOON is not set which activated this piece of code in arch/x86/xen/mmu.c: > @@ -69,6 +69,13 @@ > __attribute__((section(".data.page_aligned"))) = > { [ 0 ... TOP_ENTRIES - 1] = &p2m_missing[0] }; > > +/* Arrays of p2m arrays expressed in mfns used for save/restore */ > +static unsigned long p2m_top_mfn[TOP_ENTRIES] > + __attribute__((section(".bss.page_aligned"))); > + > +static unsigned long p2m_top_mfn_list[TOP_ENTRIES / P2M_ENTRIES_PER_PAGE] > + __attribute__((section(".bss.page_aligned"))); The problem is, you must only put variables into .bss.page_aligned that have a _size_ that is _exactly_ page aligned. In this case the size of p2m_top_mfn_list is not page aligned: 80b8d000 b p2m_top_mfn 80b8f000 b p2m_top_mfn_list 80b8f008 b softirq_stack 80b97008 b hardirq_stack 80b9f008 b bm_pte So all subsequent variables get unaligned which, depending on luck, breaks the kernel in various funny ways. In this case what killed the kernel first was the misaligned bootmap pte page, resulting in that creative crash above. Anyway, this was a fun bug to track down :-) I think the moral is that .bss.page_aligned is a dangerous construct in its current form, and the symptoms of breakage are very non-trivial, so i think we need build-time checks to make sure all symbols in .bss.page_aligned are truly page aligned. The Xen fix below gets the kernel booting again. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-27xen: maintain clock offset over save/restoreJeremy Fitzhardinge
Hook into the device model to make sure that timekeeping's resume handler is called. This deals with our clocksource's non-monotonicity over the save/restore. Explicitly call clock_has_changed() to make sure that all the timers get retriggered properly. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: implement save/restoreJeremy Fitzhardinge
This patch implements Xen save/restore and migration. Saving is triggered via xenbus, which is polled in drivers/xen/manage.c. When a suspend request comes in, the kernel prepares itself for saving by: 1 - Freeze all processes. This is primarily to prevent any partially-completed pagetable updates from confusing the suspend process. If CONFIG_PREEMPT isn't defined, then this isn't necessary. 2 - Suspend xenbus and other devices 3 - Stop_machine, to make sure all the other vcpus are quiescent. The Xen tools require the domain to run its save off vcpu0. 4 - Within the stop_machine state, it pins any unpinned pgds (under construction or destruction), performs canonicalizes various other pieces of state (mostly converting mfns to pfns), and finally 5 - Suspend the domain Restore reverses the steps used to save the domain, ending when all the frozen processes are thawed. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xenbus: rebind irq on restoreJeremy Fitzhardinge
When restoring, rebind the existing xenbus irq to the new xenbus event channel. (It turns out in practice that this is always the same, and is never updated on restore. That's a bug, but Xeno-linux has been like this for a long time, so it can't really be fixed.) Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen-console: add save/restoreJeremy Fitzhardinge
Add code to: 1. Deal with the console page being canonicalized. During save, the console's mfn in the start_info structure is canonicalized to a pfn. In order to deal with that, we always use a copy of the pfn and indirect off that all the time. However, we fall back to using the mfn if the pfn hasn't been initialized yet. 2. Restore the console event channel, and rebind it to the existing irq. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: fix unbind_from_irq()Jeremy Fitzhardinge
Rearrange the tests in unbind_from_irq() so that we can still unbind an irq even if the underlying event channel is bad. This allows a device driver to shuffle its irqs on save/restore before the underlying event channels have been fixed up. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: add rebind_evtchn_irqJeremy Fitzhardinge
Add rebind_evtchn_irq(), which will rebind an device driver's existing irq to a new event channel on restore. Since the new event channel will be masked and bound to vcpu0, we update the state accordingly and unmask the irq once everything is set up. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: add p2m mfn_list_listJeremy Fitzhardinge
When saving a domain, the Xen tools need to remap all our mfns to portable pfns. In order to remap our p2m table, it needs to know where all its pages are, so maintain the references to the p2m table for it to use. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: make dummy_shared_info non-staticJeremy Fitzhardinge
Rename dummy_shared_info to xen_dummy_shared_info and make it non-static, in anticipation of users outside of enlighten.c Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: efficiently support a holey p2m tableJeremy Fitzhardinge
When using sparsemem and memory hotplug, the kernel's pseudo-physical address space can be discontigious. Previously this was dealt with by having the upper parts of the radix tree stubbed off. Unfortunately, this is incompatible with save/restore, which requires a complete p2m table. The solution is to have a special distinguished all-invalid p2m leaf page, which we can point all the hole areas at. This allows the tools to see a complete p2m table, but it only costs a page for all memory holes. It also simplifies the code since it removes a few special cases. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: add configurable max domain sizeJeremy Fitzhardinge
Add a config option to set the max size of a Xen domain. This is used to scale the size of the physical-to-machine array; it ends up using around 1 page/GByte, so there's no reason to be very restrictive. For a 32-bit guest, the default value of 8GB is probably sufficient; there's not much point in giving a 32-bit machine much more memory than that. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: make phys_to_machine structure dynamicJeremy Fitzhardinge
We now support the use of memory hotplug, so the physical to machine page mapping structure must be dynamic. This is implemented as a two-level radix tree structure, which allows us to efficiently incrementally allocate memory for the p2m table as new pages are added. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: drivers/xen/balloon.c: make a function staticAdrian Bunk
Make the needlessly global balloon_set_new_target() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: count resched interrupts properlyJeremy Fitzhardinge
Make sure resched interrupts appear in /proc/interrupts in the proper place. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: add missing definitions in include/xen/interface/memory.h which ↵Isaku Yamahata
ia64/xen needs Add xen handles realted definitions for xen memory which ia64/xen needs. Pointer argumsnts for ia64/xen hypercall are passed in pseudo physical address (guest physical address) so that it is required to convert guest kernel virtual address into pseudo physical address. The xen guest handle represents such arguments. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: compilation fix to balloon driver for ia64 supportIsaku Yamahata
fix compilation error of ballon driver on ia64. extent_start member is pointer argument. On x86 pointer argument for xen hypercall is passed as virtual address. On the other hand, ia64 and ppc, pointer argument is passed in pseudo physical address. (guest physicall address.) So they must be passed as handle and convert right before issuing hypercall. CC drivers/xen/balloon.o linux-2.6-x86/drivers/xen/balloon.c: In function 'increase_reservation': linux-2.6-x86/drivers/xen/balloon.c:228: error: incompatible types in assignment linux-2.6-x86/drivers/xen/balloon.c: In function 'decrease_reservation': linux-2.6-x86/drivers/xen/balloon.c:324: error: incompatible types in assignment linux-2.6-x86/drivers/xen/balloon.c: In function 'dealloc_pte_fn': linux-2.6-x86/drivers/xen/balloon.c:486: error: incompatible types in assignment linux-2.6-x86/drivers/xen/balloon.c: In function 'alloc_empty_pages_and_pagevec': linux-2.6-x86/drivers/xen/balloon.c:522: error: incompatible types in assignment make[2]: *** [drivers/xen/balloon.o] Error 1 Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: Move manage.c to drivers/xen for ia64/xen supportIsaku Yamahata
move arch/x86/xen/manage.c under drivers/xen/to share codes with x86 and ia64. ia64/xen also uses manage.c Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: make earlyprintk=xen work againJeremy Fitzhardinge
For some perverse reason, if you call add_preferred_console() it prevents setup_early_printk() from successfully enabling the boot console - unless you make it a preferred console too... Also, make xenboot console output distinct from normal console output, since it gets repeated when the console handover happens, and the duplicated output is confusing without disambiguation. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Markus Armbruster <armbru@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com>
2008-05-27xen pvfb: Dynamic mode support (screen resizing)Markus Armbruster
The pvfb backend indicates dynamic mode support by creating node feature_resize with a non-zero value in its xenstore directory. xen-fbfront sends a resize notification event on mode change. Fully backwards compatible both ways. Framebuffer size and initial resolution can be controlled through kernel parameter xen_fbfront.video. The backend enforces a separate size limit, which it advertises in node videoram in its xenstore directory. xen-kbdfront gets the maximum screen resolution from nodes width and height in the backend's xenstore directory instead of hardcoding it. Additional goodie: support for larger framebuffers (512M on a 64-bit system with 4K pages). Changing the number of bits per pixels dynamically is not supported, yet. Ported from http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/92f7b3144f41 http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/bfc040135633 Signed-off-by: Pat Campbell <plc@novell.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen pvfb: Zero unused bytes in events sent to backendMarkus Armbruster
This isn't a security flaw (the backend can see all our memory anyway). But it's the right thing to do all the same. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen pvfb: Module aliases to support module autoloadingMarkus Armbruster
These are mostly for completeness and consistency with the other frontends, as PVFB is typically compiled in rather than a module. Derived from http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/5e294e29a43e While there, add module descriptions. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen pvfb: Pointer z-axis (mouse wheel) supportMarkus Armbruster
Add z-axis motion to pointer events. Backward compatible, because there's space for the z-axis in union xenkbd_in_event, and old backends zero it. Derived from http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/57dfe0098000 http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/1edfea26a2a9 http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/c3ff0b26f664 Signed-off-by: Pat Campbell <plc@novell.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: Enable console tty by default in domU if it's not a dummyMarkus Armbruster
Without console= arguments on the kernel command line, the first console to register becomes enabled and the preferred console (the one behind /dev/console). This is normally tty (assuming CONFIG_VT_CONSOLE is enabled, which it commonly is). This is okay as long tty is a useful console. But unless we have the PV framebuffer, and it is enabled for this domain, tty0 in domU is merely a dummy. In that case, we want the preferred console to be the Xen console hvc0, and we want it without having to fiddle with the kernel command line. Commit b8c2d3dfbc117dff26058fbac316b8acfc2cb5f7 did that for us. Since we now have the PV framebuffer, we want to enable and prefer tty again, but only when PVFB is enabled. But even then we still want to enable the Xen console as well. Problem: when tty registers, we can't yet know whether the PVFB is enabled. By the time we can know (xenstore is up), the console setup game is over. Solution: enable console tty by default, but keep hvc as the preferred console. Change the preferred console to tty when PVFB probes successfully, unless we've been given console kernel parameters. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27x86/paravirt: add pte_flags to just get pte flagsJeremy Fitzhardinge
Add pte_flags() to extract the flags from a pte. This is a special case of pte_val() which is only guaranteed to return the pte's flags correctly; the page number may be corrupted or missing. The intent is to allow paravirt implementations to return pte flags without having to do any translation of the page number (most notably, Xen). Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: don't worry about preempt during xen_irq_enable()Jeremy Fitzhardinge
When enabling interrupts, we don't need to worry about preemption, because we either enter with interrupts disabled - so no preemption - or the caller is confused and is re-enabling interrupts on some indeterminate processor. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: allow some cr4 updatesJeremy Fitzhardinge
The guest can legitimately change things like cr4.OSFXSR and OSXMMEXCPT, so let it. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: use new sched_opJeremy Fitzhardinge
Use the new sched_op hypercall, mainly because xenner doesn't support the old one. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: use hypercall rather than cltsJeremy Fitzhardinge
Xen will trap and emulate clts, but its better to use a hypercall. Also, xenner doesn't handle clts. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: make early console also write to debug consoleJeremy Fitzhardinge
When using "earlyprintk=xen", also write the console output to the raw debug console. This will appear on dom0's console if the hypervisor has been compiled to allow it. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: add raw console write functions for debugJeremy Fitzhardinge
Add a couple of functions which can write directly to the Xen console for debugging. This output ends up on the host's dom0 console (assuming it allows the domain to write there). Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-22xen: remove support for non-PAE 32-bitJeremy Fitzhardinge
Non-PAE operation has been deprecated in Xen for a while, and is rarely tested or used. xen-unstable has now officially dropped non-PAE support. Since Xen/pvops' non-PAE support has also been broken for a while, we may as well completely drop it altogether. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-21HTC_EGPIO is ARM-onlytip-x86-ldt-2008-05-26_08_53_Montip-pci-for-jesse-2008-05-26_08_52_MonAl Viro
driver uses symbols defined only on ARM Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21provide out-of-line strcat() for m68kAl Viro
Whether we sidestep it in init/main.c or not, such situations will arise again; compiler does generate calls of strcat() on optimizations, so we really ought to have an out-of-line version... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21caiaq endianness fixAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21MODULE_LICENSE expects "GPL v2", not "GPLv2"Al Viro
... and we have few enough places using the latter to make it simpler to do search and replace... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21msnd_* is ISA-onlyAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21missing dependencies on HAS_DMAAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21ocfs2 endianness fixesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21irda-usb endianness annotations and fixesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21sbus bpp: instances missed in s/dev_name/bpp_dev_name/Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21ecryptfs fixesAl Viro
memcpy() from userland pointer is a Bad Thing(tm) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21misc drivers/net endianness noiseAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21thanks to net/mac80211 we need to pull drivers/leds/Kconfig on umlAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-02 06:35:29 +0000