summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-12-06mei: synchronize irq before initiating a reset.Tomas Winkler
We need to synchronize irqs before issuing reset to make sure that the clients communication is concluded and doesn't leak to the reset flow and confusing the state machine. This issue is happening during suspend/resume stress testing. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06VME: Remove shutdown entry from vme_driverMartyn Welch
The vme_driver structure currently has a "shutdown" entry. This entry is never used, it lacks the correct parameter (it should be providing a pointer to the relevant vme_dev struct to even *look* usable), the VME subsystem currently doesn't provide support for shutdown functions and no in-tree drivers use it (hardly surprising, given it'd never be called). Remove the entry from vme_driver to avoid confusion. Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-01Merge tag 'fpga-for-greg-20161129' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/atull/linux-fpga into char-misc-next Alan writes: fpga: Updates for 4.10 These are: * Add git url to MAINTAINERS * Allow write_init to specify how much buffer it needs * Fixes for ISR state in zynq fpga manager driver * Other small fixes for zynq * Add Altera SoCFPGA drivers for COMPILE_TEST
2016-11-30auxdisplay: ht16k33: select framebuffer helper modulesRobin van der Gracht
The new driver caused a rare randconfig failure: drivers/auxdisplay/ht16k33.o:(.data.ht16k33_fb_ops+0xc): undefined reference to `fb_sys_read' drivers/auxdisplay/ht16k33.o:(.data.ht16k33_fb_ops+0x10): undefined reference to `fb_sys_write' This selects the respective helper modules. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29MAINTAINERS: add git url for fpgaAlan Tull
Add git url for fpga stuff. Signed-off-by: Alan Tull <atull@opensource.altera.com>
2016-11-29fpga: Clarify how write_init works streaming modesJason Gunthorpe
This interface was designed for streaming, but write_init's buf argument has an unclear purpose. Define it to be the first bytes of the bitstream. Each driver gets to set how many bytes (at most) it wants to see. Short bitstreams will be passed through as-is, while long ones will be truncated. The intent is to allow drivers to peek at the header before the transfer actually starts. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Alan Tull <atull@opensource.altera.com>
2016-11-29fpga zynq: Fix incorrect ISR state on bootupJason Gunthorpe
It is best practice to clear and mask all interrupts before associating the IRQ, and this should be done after the clock is enabled. This corrects a bad result from zynq_fpga_ops_state on bootup where left over latched values in INT_STS_OFFSET caused it to report an unconfigured FPGA as configured. After this change the boot up operating state for an unconfigured FPGA reports 'unknown'. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Alan Tull <atull@opensource.altera.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
2016-11-29fpga zynq: Remove priv->devJason Gunthorpe
socfpga uses mgr->dev for debug prints, there should be consistency here, so standardize on that. The only other use was for dma which can be replaced with mgr->dev.parent. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Alan Tull <atull@opensource.altera.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
2016-11-29fpga zynq: Add missing \n to messagesJason Gunthorpe
Function dev_err doesn't add a newline at the end of the string. This will lead to a hard to read kernel log. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Alan Tull <atull@opensource.altera.com>
2016-11-29fpga: Add COMPILE_TEST to all driversJason Gunthorpe
Like Zynq the Altera drivers compile fine on x86 and others too, so make it easier to compile test this stuff. A10 requires REGMAP_MMIO to compile, so be explicit rather than relying on it via ARCH_SOCFPGA. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Alan Tull <atull@opensource.altera.com>
2016-11-29uio: pruss: add clk_disable()Alexey Khoroshilov
pruss_probe() enables gdev->pruss_clk, but there is no clk_disable() in the driver. The patch adds clk_disable() to pruss_cleanup() and error handling for clk_enable(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29char/pcmcia: add some error checking in scr24x_read()Dan Carpenter
The "ret = " assignment seems to have accidentally been left off. Fixes: f2ed287bcc90 ("char/pcmcia: add scr24x_cs chip card interface driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29MAINTAINERS: Update fpga-mgr entry with new linux-fpga mailing listMoritz Fischer
Update the fpga-mgr framework entry with new linux-fpga@vger.kernel.org mailing list. Signed-off-by: Moritz Fischer <mdf@kernel.org> Cc: Alan Tull <atull@opensource.altera.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-fpga@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29snsc: restore IRQs on error path in scdrv_write()Dan Carpenter
This bug is as old as git. We need to be calling spin_unlock_irqrestore() instead of regular spin_unlock() here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29ppdev: check before attaching portSudip Mukherjee
After parport starts using the device model, all pardevice drivers should decide in their match_port callback function if they want to attach with that particulatr port. ppdev has been converted to use the new parport device-model code but pp_attach() tried to attach with all the ports. Create a new array of pointer and use that to remember the ports we have attached. And use that information to skip attaching ports which we have already attached. Tested-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29ppdev: use pr_* macrosSudip Mukherjee
The coding style recommends not to use printk. Use pr_* macros. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29MAINTAINERS: update emailSudip Mukherjee
I am no longer with Vector India. Update my email. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29ppdev: fix memory leakSudip Mukherjee
The variable name was only released if parport_register_dev_model() fails. Now that we are using the device-model the parport driver will duplicate the name and use it. So we can release the variable after the device has been registered with the parport. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29mei: me: add lewisburg device idsTomas Winkler
Add MEI Lewisburg PCH IDs for Purley based workstations. Cc: <stable@vger.kernel.org> # 4.8.x Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29mei: request async autosuspend at the end of enumerationAlexander Usyskin
pm_runtime_autosuspend can take synchronous or asynchronous paths, Because we are calling pm_runtime_mark_last_busy just before this most of the cases it takes the asynchronous way. However, when the FW or driver resets during already running runtime suspend, the call will result in calling to the driver's rpm callback and results in a deadlock on device_lock. The simplest fix is to replace pm_runtime_autosuspend with asynchronous pm_request_autosuspend. Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29coresight: perf: Add a missing call to etm_free_auxQuentin Lambert
Most error branches following the call to alloc_event_data contain a call to etm_free_aux. This patch add a call to etm_free_aux to an error branch that does not call it. This issue was found with Hector. Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29coresight: Add support for ARM Coresight STM-500Suzuki K Poulose
Add the PIDs for STM-500 to the known STM devices list. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29coresight: tmc: Remove duplicate memsetSuzuki K. Poulose
The tmc_etr_enable_hw() fills the buffer with 0's before enabling the hardware. So, we don't need an explicit memset() in tmc_enable_etr_sink_sysfs() before calling the tmc_etr_enable_hw(). This patch removes the explicit memset from tmc_enable_etr_sink_sysfs. Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29coresight: tmc: Get rid of mode parameter for helper routinesSuzuki K. Poulose
Get rid of the superfluous mode parameter and the check for the mode in tmc_etX_enable_sink_{perf/sysfs}. While at it, also remove the unnecessary WARN_ON() checks. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29coresight: tmc: Cleanup operation mode handlingSuzuki K. Poulose
The mode of operation of the TMC tracked in drvdata->mode is defined as a local_t type. This is always checked and modified under the drvdata->spinlock and hence we don't need local_t for it and the unnecessary synchronisation instructions that comes with it. This change makes the code a bit more cleaner. Also fixes the order in which we update the drvdata->mode to CS_MODE_DISABLED. i.e, in tmc_disable_etX_sink we change the mode to CS_MODE_DISABLED before invoking tmc_disable_etX_hw() which in turn depends on the mode to decide whether to dump the trace to a buffer. Applies on mathieu's coresight/next tree [1] https://git.linaro.org/kernel/coresight.git next Reported-by: Venkatesh Vivekanandan <venkatesh.vivekanandan@broadcom.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29coresight: reset "enable_sink" flag when need beMathieu Poirier
When using coresight from the perf interface sinks are specified as part of the perf command line. As such the sink needs to be disabled once it has been acknowledged by the coresight framework. Otherwise the sink stays enabled, which may interfere with other sessions. This patch removes the sink selection check from the build path process and make it a function on it's own. The function is then used when operating from sysFS or perf to determine what sink has been selected. If operated from perf the status of the "enable_sink" flag is reset so that concurrent session can use a different sink. When used from sysFS the status of the flag is left untouched since users have full control. The implementation doesn't handle a scenario where a sink has been enabled from sysFS and another sink is selected from the perf command line as both modes of operation are mutually exclusive. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29coresight: etm3x: Adding missing features of Coresight PTM componentsMuhammad Abdul WAHAB
In the current driver for Coresight components, two features of PTM components are missing: 1. Branch Broadcasting (present also in ETM but called Branch Output) 2. Return Stack (only present in PTM v1.0 and PTMv1.1) These features can be added simply to the code using `mode` field of `etm_config` struct. 1. **Branch Broadcast** : The branch broadcast feature is present in ETM components as well and is called Branch output. It allows to retrieve addresses for direct branch addresses alongside the indirect branch addresses. For example, it could be useful in cases when tracing without source code. 2. **Return Stack** : The return stack option allows to retrieve the return addresses of function calls. It can be useful to avoid CRA (Code Reuse Attacks) by keeping a shadowstack. Signed-off-by: Muhammad Abdul Wahab <muhammadabdul.wahab@centralesupelec.fr> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29coresight: etm3x: indentation fix (extra space removed)Muhammad Abdul WAHAB
An extra space is removed. Signed-off-by: Muhammad Abdul Wahab <muhammadabdul.wahab@centralesupelec.fr> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29coresight: stm: return error code instead of zero in .packet()Chunyan Zhang
In STM framework driver, the trace data writing loop would keep running until it received a negative return value or the whole trace packet has been written to STM device. So if the .packet() of STM device always returns zero since the device is not enabled or the parameter isn't supported, STM framework driver will stall into a dead loop. Returning -EACCES (Permission denied) in .packet() if the device is disabled makes more sense, and this is the same for returning -EINVAL if the channel passed into is not supported. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-28Merge tag 'stm-for-greg-20161118' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm into char-misc-next Alexander writes: stm class/intel_th: Updates for 4.10 These are: * Fix for an error-path leak in stm * Host-driven mode in intel_th * Documentation and other small updates
2016-11-18intel_th: Document debug host modeAlexander Shishkin
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2016-11-18intel_th: gth: Handle host mode correctlyAlexander Shishkin
When detecting host debugger mode either though a module option or via the scratchpad register, do not export any configuration or capture related attributes to userspace and refuse attempts by the output drivers to configure output ports. This way, GTH can still act as a hub and ensure that the other components that rely on its presence continue to function properly, namely the source devices. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2016-11-18intel_th: Support Host Debugger mode of operationAlexander Shishkin
This patch adds a 'host_mode' module option to enable host-driven operational mode in the driver. In this mode, the driver does not perform trace configuration or enable trace capture, but still provides all the means necessary for software trace sources to write their data to the Trace Hub. This means that the debug host takes care of all the configuration and enabling and we do not interfere. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2016-11-18intel_th: Constify subdevicesAlexander Shishkin
The subdevice array consists of immutable objects, make them const. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2016-11-18stm class: Document stm_source channel assignmentAlexander Shishkin
This patch adds an explanation of how and when stm_source devices are assigned STP masters and channels. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2016-11-18stm class: Document the stm_source interfaceAlexander Shishkin
This patch adds a description of the stm_source device class, an interface for the kernel code to send traces over STM devices. Cc: linux-api@vger.kernel.org Cc: Chunyan Zhang <zhang.chunyan@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2016-11-18stm class: Fix device leak in open error pathJohan Hovold
Make sure to drop the reference taken by class_find_device() also on allocation errors in open(). Signed-off-by: Johan Hovold <johan@kernel.org> Fixes: 7bd1d4093c2f ("stm class: Introduce an abstraction for...") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2016-11-17mei: bus: split RX and async notification callbacksAlexander Usyskin
Split callbacks for RX and async notification events on mei bus to eliminate synchronization problems and to open way for RX optimizations. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-17mei: bus: make a client pointer always availableAlexander Usyskin
Change life time of the client pointer, allocate it upon client device creation and free it upon device destruction, instead of upon connection and disconnection. This helps to eliminate racy NULL checks in the bus code. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-17mei: introduce host client uninitialized stateAlexander Usyskin
Introduce a new host client state, MEI_FILE_UNINITIALIZED, to distinguish client objects that was unlinked, but not destroyed and can be linked again. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-17ARM: socfpga: checking the wrong variableDan Carpenter
This is a cut and paste bug. We had intended to check "sysmgr". Fixes: e5f8efa5c8bf ("ARM: socfpga: fpga bridge driver support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-16scr24x_cs: include linux/io.hArnd Bergmann
The newly added scr24x_cs driver doesn't build in some configurations: drivers/char/pcmcia/scr24x_cs.c: In function 'scr24x_wait_ready': drivers/char/pcmcia/scr24x_cs.c:76:12: error: implicit declaration of function 'ioread8' [-Werror=implicit-function-declaration] Adding in explicit include for the right header makes it work. Fixes: f2ed287bcc90 ("char/pcmcia: add scr24x_cs chip card interface driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-15lkdtm: Prevent the compiler from optimising lkdtm_CORRUPT_STACK()Michael Ellerman
At least on powerpc with GCC 6, the compiler is smart enough to optimise lkdtm_CORRUPT_STACK() into an empty function that just returns. If we print the buffer after we've written to it that prevents the compiler from optimising away data and the memset(). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-15mei: fix parameter rename KDocAlexander Usyskin
Parameter renaming to fop_type was not reflected in KDoc Fixes: 3030dc0564594 (mei: add wrapper for queuing control commands) Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-15mei: constify buffer in the write functions callsTomas Winkler
The write buffer should not by modified so make it constant. Also hitchhike some style fixes on the way in the interface and rename mei_me_write_message to mei_me_hbuf_write for consistency. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-15mei: consolidate repeating code in mei_cl_irq_read_msgTomas Winkler
A cb is always placed on the completion queue during discarding queue. Hence this can be performed upon discard. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-15mcb: fix compiler warning logical-op in mcb-parse.cMichael Moese
The expression was clearly wrong, the logical AND of expressions must be changed to a logical OR. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Michael Moese <michael.moese@men.de> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14Merge 4.9-rc5 into char-misc-nextGreg Kroah-Hartman
We want those fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-13Linux 4.9-rc5v4.9-rc5Linus Torvalds
2016-11-13Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "ARM fixes. There are a couple pending x86 patches but they'll have to wait for next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm/arm64: vgic: Kick VCPUs when queueing already pending IRQs KVM: arm/arm64: vgic: Prevent access to invalid SPIs arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a single CPU
generated by cgit v1.2.3 (git 2.0.4) at 2025-04-28 18:24:56 +0000