summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-03Merge branches 'clk-actions', 'clk-rockchip', 'clk-iproc', 'clk-intel' and ↵Stephen Boyd
'clk-debugfs' into clk-next - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs * clk-actions: MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCs clk: actions: Add Actions S500 SoC Reset Management Unit support dt-bindings: reset: Add binding constants for Actions S500 RMU clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC clk: actions: Fix h_clk for Actions S500 SoC * clk-rockchip: clk: rockchip: add sclk_mac_lbtest to rk3188_critical_clocks clk: rockchip: Revert "fix wrong mmc sample phase shift for rk3328" clk: rockchip: use separate compatibles for rk3288w-cru dt-bindings: clocks: add rk3288w variant compatible clk: rockchip: Handle clock tree for rk3288w variant clk: rockchip: convert rk3036 pll type to use internal lock status clk: rockchip: convert basic pll lock_wait to use regmap_read_poll_timeout clk: rockchip: convert rk3399 pll type to use readl_relaxed_poll_timeout * clk-iproc: clk: iproc: round clock rate to the closest * clk-intel: clk: intel: Avoid unnecessary memset by improving code clk: intel: Improve locking in the driver clk: intel: Use devm_clk_hw_register() instead of clk_hw_register() * clk-debugfs: clk: Add support for enabling/disabling clocks from debugfs
2020-08-03Merge branches 'clk-https', 'clk-renesas', 'clk-kconfig', 'clk-amlogic' and ↵Stephen Boyd
'clk-imx' into clk-next * clk-https: Replace HTTP links with HTTPS ones: Common CLK framework * clk-renesas: clk: renesas: cpg-mssr: Add r8a774e1 support dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1 clk: renesas: Add r8a774e1 CPG Core Clock Definitions dt-bindings: power: Add r8a774e1 SYSC power domain definitions clk: renesas: rzg2: Mark RWDT clocks as critical clk: renesas: rcar-gen3: Mark RWDT clocks as critical clk: renesas: cpg-mssr: Mark clocks as critical only if on at boot dt-bindings: clock: renesas: cpg: Convert to json-schema * clk-kconfig: clk: hsdk: Fix bad dependency on IOMEM clk: Specify IOMEM dependency for HSDK pll driver clk: Drop duplicate selection in Kconfig clk: AST2600: Add mux for EMMC clock clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER * clk-amlogic: clk: meson: meson8b: add the vclk2_en gate clock clk: meson: meson8b: add the vclk_en gate clock clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2 clk: meson: g12a: Add support for NNA CLK source clocks dt-bindings: clk: g12a-clkc: Add NNA CLK Source clock IDs * clk-imx: clk: imx: vf610: add CAAM clock clk: imx8mp: add mu root clk
2020-08-03Merge branches 'clk-socfpga', 'clk-doc', 'clk-qcom', 'clk-vc5' and 'clk-bcm' ↵Stephen Boyd
into clk-next - Enable CPU clks on Qualcomm IPQ6018 SoCs - Enable CPU clks on Qualcomm MSM8996 SoCs - GPU clk support for Qualcomm SM8150 and SM8250 SoCs - Audio clks on Qualcomm SC7180 SoCs - Make defines for bcm63xx-gate clks to use in DT - Support gate clks on BCM6318 SoCs - Add HDMI clks for BCM2711 SoCs - Support BCM2711 SoC firmware clks * clk-socfpga: clk: socfpga: agilex: mpu_l2ram_clk should be mpu_ccu_clk clk: socfpga: agilex: add nand_x_clk and nand_ecc_clk dt-bindings: agilex: add NAND_X_CLK and NAND_ECC_CLK * clk-doc: clk: Clean up kernel-doc errors clk: <linux/clk-provider.h>: drop a duplicated word clk: add function documentation for clk_hw_round_rate() * clk-qcom: (38 commits) dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180 clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clk clk: qcom: gcc-sdm660: Add missing modem reset clk: qcom: lpass: Add support for LPASS clock controller for SC7180 clk: qcom: gcc: Add support for GCC LPASS clock for SC7180 dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180 clk: qcom: gdsc: Add support to enable retention of GSDCR clk: qcom: Export gdsc_gx_do_nothing_enable() to modules clk: qcom: Add graphics clock controller driver for SM8250 clk: qcom: Add graphics clock controller driver for SM8150 clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers dt-bindings: clock: add SM8250 QCOM Graphics clock bindings dt-bindings: clock: add SM8150 QCOM Graphics clock bindings dt-bindings: clock: combine qcom,sdm845-gpucc and qcom,sc7180-gpucc clk: qcom: gcc: remove unnecessary vco_table from SM8150 clk: qcom: clk-alpha-pll: use the right PCAL_DONE value for lucid pll clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL clk: qcom: gcc: fix sm8150 GPU and NPU clocks dt-bindings: clock: Fix qcom,msm8996-apcc yaml syntax ... * clk-vc5: clk: vc5: use a dedicated struct to describe the output drivers dt-bindings: clk: versaclock5: convert to yaml MAINTAINERS: take over IDT VersaClock 5 clock driver dt-bindings: clk: versaclock5: fix 'idt' prefix typos clk: vc5: Add memory check to prevent oops clk: vc5: fix use of memory after it has been kfree'd clk: vc5: Enable addition output configurations of the Versaclock dt: Add additional option bindings for IDT VersaClock clk: vc5: Allow Versaclock driver to support multiple instances * clk-bcm: (44 commits) clk: bcm2835: Do not use prediv with bcm2711's PLLs dt-bindings: arm: bcm: Add a select to the RPI Firmware binding clk: bcm: dvp: Add missing module informations clk: bcm: rpi: Remove the quirks for the CPU clock clk: bcm2835: Don't cache the PLLB rate clk: bcm2835: Allow custom CCF flags for the PLLs Revert "clk: bcm2835: remove pllb" clk: bcm: rpi: Give firmware clocks a name clk: bcm: rpi: Discover the firmware clocks clk: bcm: rpi: Add an enum for the firmware clocks clk: bcm: rpi: Add DT provider for the clocks clk: bcm: rpi: Make the PLLB registration function return a clk_hw clk: bcm: rpi: Split pllb clock hooks clk: bcm: rpi: Rename is_prepared function clk: bcm: rpi: Pass the clocks data to the firmware function clk: bcm: rpi: Add clock id to data clk: bcm: rpi: Create a data structure for the clocks clk: bcm: rpi: Use CCF boundaries instead of rolling our own clk: bcm: rpi: Make sure the clkdev lookup is removed clk: bcm: rpi: Switch to clk_hw_register_clkdev ...
2020-08-03clk: bcm2835: Do not use prediv with bcm2711's PLLsNicolas Saenz Julienne
Contrary to previous SoCs, bcm2711 doesn't have a prescaler in the PLL feedback loop. Bypass it by zeroing fb_prediv_mask when running on bcm2711. Note that, since the prediv configuration bits were re-purposed, this was triggering miscalculations on all clocks hanging from the VPU clock, notably the aux UART, making its output unintelligible. Fixes: 42de9ad400af ("clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20200730182619.23246-1-nsaenzjulienne@suse.de Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-08-03clk: hsdk: Fix bad dependency on IOMEMGeert Uytterhoeven
CONFIG_IOMEM does not exist. The correct symbol to depend on is CONFIG_HAS_IOMEM. Fixes: 1e7468bd9d30a21e ("clk: Specify IOMEM dependency for HSDK pll driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200803084835.21838-1-geert+renesas@glider.be Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-08-03Merge branch 'clk-fixes' into clk-kconfigStephen Boyd
Need to merge this up to get the IOMEM dependency patch on top that is broken and fixed in the next commit. * clk-fixes: clk: Specify IOMEM dependency for HSDK pll driver clk: AST2600: Add mux for EMMC clock clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER
2020-07-31dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180Douglas Anderson
The YAML schemas that landed forgot one clock: "bi_tcxo". Presumably the bindings were developed against the v4 version of the driver and when the ".name" was removed in v5 of the driver things broke. While touching this, add the needed includes in each example. I believe both examples are supposed to be independent of each other. Let's fix the bindings. Fixes: 381cc6f97cda ("dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200731133006.1.Iee81b115f5be50d6d69500fe1bda11bba6e16143@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-27clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clkKonrad Dybcio
Add missing halt_check, hwcg_reg and hwcg_bit properties. These were likely omitted when porting the driver upstream. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200726111215.22361-9-konradybcio@gmail.com Fixes: f2a76a2955c0 ("clk: qcom: Add Global Clock controller (GCC) driver for SDM660") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-27clk: qcom: gcc-sdm660: Add missing modem resetKonrad Dybcio
This will be required in order to support the modem upstream. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200726111215.22361-2-konradybcio@gmail.com Fixes: f2a76a2955c0 ("clk: qcom: Add Global Clock controller (GCC) driver for SDM660") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: lpass: Add support for LPASS clock controller for SC7180Taniya Das
The Low Power Audio subsystem clocks are required for Audio client to be able to request for the clocks and power domains. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1595606878-2664-5-git-send-email-tdas@codeaurora.org [sboyd@kernel.org: Drop unused ret in probe function] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: gcc: Add support for GCC LPASS clock for SC7180Taniya Das
Add the GCC lpass clock which is required to access the LPASS core clocks. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1595606878-2664-4-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180Taniya Das
The LPASS(Low Power Audio Subsystem) clock provider have a bunch of generic properties that are needed in a device tree. Also add clock ids for GCC LPASS and LPASS Core clock IDs for LPASS client to request for the clocks. Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1595606878-2664-3-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: gdsc: Add support to enable retention of GSDCRTaniya Das
Add support for the RETAIN_FF_ENABLE feature which enables the usage of retention registers. These registers maintain their state after disabling and re-enabling a GDSC. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1595606878-2664-2-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: Clean up kernel-doc errorsStephen Boyd
Two things aren't documented causing kernel-doc to fail when checking the core clk.c file. Fix them so that this file is clean. Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20200622090935.213833-1-sboyd@kernel.org
2020-07-24clk: qcom: Export gdsc_gx_do_nothing_enable() to modulesStephen Boyd
A clk driver can be a module but the gdsc code is in the common module. Export this symbol so that allmodconfig builds keep working. Cc: Jonathan Marek <jonathan@marek.ca> Fixes: 0638226dd095 ("clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20200724094025.3261266-1-sboyd@kernel.org
2020-07-24clk: Add support for enabling/disabling clocks from debugfsMike Tipton
For test and debug purposes, it's simple enough to enable or disable clocks from shell. Add a new debugfs file 'clk_prepare_enable' that calls clk_prepare_enable() when writing "1" and clk_disable_unprepare() when writing "0". This can have security implications, so only support it when the code has been modified to #define CLOCK_ALLOW_WRITE_DEBUGFS. Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20200630003024.6282-1-mdtipton@codeaurora.org [sboyd@kernel.org: Reword commit text and remove comment update] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: intel: Avoid unnecessary memset by improving codeRahul Tanwar
memset can be avoided in a loop if the variables used are declared inside the loop. Move such variables declaration inside the loop to avoid memset. Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com> Link: https://lore.kernel.org/r/26624b65d0e6b958c4765a406b9929d1a9ce1c2c.1594880946.git.rahul.tanwar@linux.intel.com [sboyd@kernel.org: Drop NULL assignment that is overwritten] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: intel: Improve locking in the driverRahul Tanwar
Remove/reduce unnecessary spin locking of the code. Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com> Link: https://lore.kernel.org/r/79c0f5f9f5bc512a7e2b5f3c91f6341f28b5854c.1594880946.git.rahul.tanwar@linux.intel.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: intel: Use devm_clk_hw_register() instead of clk_hw_register()Rahul Tanwar
To ensure that clks are unregistered in case of any failure, use devm_clk_hw_register() instead of clk_hw_register(). Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com> Link: https://lore.kernel.org/r/7ef7009b4e9f986fd6dfbf487c0e85de68a4ba9b.1594880946.git.rahul.tanwar@linux.intel.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: iproc: round clock rate to the closestLori Hikichi
Change from 'DIV_ROUND_UP' to 'DIV_ROUND_CLOSEST' when calculating the clock divisor in the iProc ASIU clock driver to allow to get to the closest clock rate. Fixes: 5fe225c105fd ("clk: iproc: add initial common clock support") Signed-off-by: Lori Hikichi <lhikichi@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Link: https://lore.kernel.org/r/20200612225212.124301-1-ray.jui@broadcom.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: Add graphics clock controller driver for SM8250Jonathan Marek
Add support for the graphics clock controller found on SM8250 based devices. This is initially copied from the downstream kernel, but has been modified to more closely match the upstream sc7180 driver. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-12-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: Add graphics clock controller driver for SM8150Jonathan Marek
Add support for the graphics clock controller found on SM8150 based devices. This is initially copied from the downstream kernel, but has been modified to more closely match the upstream sc7180 driver. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-11-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc driversJonathan Marek
All gpucc drivers need this, so move it to common code instead of duplicating it in every gpucc driver. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-10-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24dt-bindings: clock: add SM8250 QCOM Graphics clock bindingsJonathan Marek
Add device tree bindings for graphics clock controller for Qualcomm Technology Inc's SM8250 SoCs. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-9-jonathan@marek.ca Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24dt-bindings: clock: add SM8150 QCOM Graphics clock bindingsJonathan Marek
Add device tree bindings for graphics clock controller for Qualcomm Technology Inc's SM8150 SoCs. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-8-jonathan@marek.ca Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24dt-bindings: clock: combine qcom,sdm845-gpucc and qcom,sc7180-gpuccJonathan Marek
These two bindings are almost identical, so combine them into one. This will make it easier to add the sm8150 and sm8250 gpucc bindings. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-7-jonathan@marek.ca Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: gcc: remove unnecessary vco_table from SM8150Jonathan Marek
The fixed alpha pll ops only use it for clamping in round_rate, which is unnecessary. This is consistent with SM8250 GCC not using vco_table. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-6-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: clk-alpha-pll: use the right PCAL_DONE value for lucid pllJonathan Marek
Lucid PCAL_DONE is different from trion. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-5-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: clk-alpha-pll: same regs and ops for trion and lucidJonathan Marek
Fixed ops were already identical, this adds support for non-fixed ops by sharing between trion and lucid. This also changes the names for trion ops to be consistent with the rest. Note LUCID_PCAL_DONE is renamed to TRION_PCAL_DONE because it is wrong for lucid, LUCID_PCAL_DONE should be BIT(27). Next patch will address this. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-4-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VALJonathan Marek
0x44 isn't a register offset, it is the value that goes into CAL_L_VAL. Fixes: 548a909597d5 ("clk: qcom: clk-alpha-pll: Add support for Trion PLLs") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-3-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: gcc: fix sm8150 GPU and NPU clocksJonathan Marek
Fix the parents and set BRANCH_HALT_SKIP. From the downstream driver it should be a 500us delay and not skip, however this matches what was done for other clocks that had 500us delay in downstream. Fixes: f73a4230d5bb ("clk: qcom: gcc: Add GPU and NPU clocks for SM8150") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-2-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-23clk: vc5: use a dedicated struct to describe the output driversLuca Ceresoli
Reusing the generic struct vc5_hw_data for all blocks is handy. However it implies we allocate space the div_int and div_frc fields even for the output drivers where they are unused, and the clk_output_cfg0 and clk_output_cfg0_mask fields for all components even though they are used only for the output drivers. Use a dedicated struct for the output drivers so that each block uses exactly the fields it needs, not more. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Link: https://lore.kernel.org/r/20200723072603.1795-1-luca@lucaceresoli.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-23dt-bindings: clk: versaclock5: convert to yamlLuca Ceresoli
Convert to yaml the VersaClock bindings document. The mapping between clock specifier and physical pins cannot be described formally in yaml schema, then keep it verbatim in the description field. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Link: https://lore.kernel.org/r/20200723074112.3159-4-luca@lucaceresoli.net Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-23MAINTAINERS: take over IDT VersaClock 5 clock driverLuca Ceresoli
Marek has been the primary developer of this driver (thanks!). Now as he is not working on it anymore he suggested I take over maintainership. Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Link: https://lore.kernel.org/r/20200723074112.3159-3-luca@lucaceresoli.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-23dt-bindings: clk: versaclock5: fix 'idt' prefix typosLuca Ceresoli
'idt' is misspelled 'itd' in a few places, fix it. Fixes: 34662f6e3084 ("dt: Add additional option bindings for IDT VersaClock") Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200723074112.3159-2-luca@lucaceresoli.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-23dt-bindings: arm: bcm: Add a select to the RPI Firmware bindingMaxime Ripard
The RaspberryPi firmware binding uses two compatible, include simple-bus. The select statement generated by default will thus select any node that has simple-bus, not all of them being the raspberrypi firmware node. This results in warnings being wrongfully reported. Let's add a custom select statement to fix that. Fixes: d4c708c032df ("dt-bindings: arm: bcm: Convert BCM2835 firmware binding to YAML") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200626115433.125735-1-maxime@cerno.tech Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22Merge tag 'v5.9-rockchip-clk1' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-rockchip Pull Rockchip clk driver updates from Heiko Stuebner: Use poll_timeout functions for pll lock-waiting and move the rk3036 to use the available lock-status in pll-registers instead of reading it from the General Register Files. Handle the clock variants on the rk3288w, revert the mmc sample shift change on rk3328 and make the mac_lbtest clock critical on rk3188. * tag 'v5.9-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: add sclk_mac_lbtest to rk3188_critical_clocks clk: rockchip: Revert "fix wrong mmc sample phase shift for rk3328" clk: rockchip: use separate compatibles for rk3288w-cru dt-bindings: clocks: add rk3288w variant compatible clk: rockchip: Handle clock tree for rk3288w variant clk: rockchip: convert rk3036 pll type to use internal lock status clk: rockchip: convert basic pll lock_wait to use regmap_read_poll_timeout clk: rockchip: convert rk3399 pll type to use readl_relaxed_poll_timeout
2020-07-22clk: vc5: Add memory check to prevent oopsAdam Ford
When getting the names of the child nodes, kasprintf is used to allocate memory which is used to create the string for the node name. Unfortunately, there is no memory check to determine if this allocation fails, it may cause an error when trying to get child node name. This patch will check if the memory allocation fails, and returns and -ENOMEM error instead of blindly moving on. Fixes: 260249f929e8 ("clk: vc5: Enable addition output configurations of the Versaclock") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Link: https://lore.kernel.org/r/20200716122620.4538-1-aford173@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22clk: vc5: fix use of memory after it has been kfree'dColin Ian King
There are a several places where printing an error message of init.name occurs after init.name has been kfree'd. Also the failure message is duplicated each time in the code. Fix this by adding a registration error failure path for these cases, moving the duplicated error messages to one common point and kfree'ing init.name only after it has been used. Changes also shrink the object code size by 171 bytes (x86-64, gcc 9.3): Before: text data bss dec hex filename 21057 3960 64 25081 61f9 drivers/clk/clk-versaclock5.o After: text data bss dec hex filename 20886 3960 64 24910 614e drivers/clk/clk-versaclock5.o Addresses-Coverity: ("Use after free") Fixes: f491276a5168 ("clk: vc5: Allow Versaclock driver to support multiple instances") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200625132736.88832-1-colin.king@canonical.com Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> [sboyd@kernel.org: Drop stray newline] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22dt-bindings: clock: Fix qcom,msm8996-apcc yaml syntaxLoic Poulain
Fix errors reported by dt_binding_check. - Fix literal block scalar for dts example - Fix schema identifier URI Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1595326714-20485-1-git-send-email-loic.poulain@linaro.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22clk: rockchip: add sclk_mac_lbtest to rk3188_critical_clocksAlex Bee
Since the loopbacktest clock is not exported and is not touched in the driver, it has to be added to rk3188_critical_clocks to be protected from being disabled and in order to get the emac working. Signed-off-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/20200722161820.5316-1-knaerzche@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-21MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCsCristian Ciocaltea
Add a reset binding entry to match all members of Actions Semi Owl SoCs. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Link: https://lore.kernel.org/r/78d63d97e3a8a8f7a9048b6eec74a9d158578833.1593788312.git.cristian.ciocaltea@gmail.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-21clk: actions: Add Actions S500 SoC Reset Management Unit supportCristian Ciocaltea
Add Reset Management Unit (RMU) support for Actions Semi S500 SoC. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/3fba2e6f0edfac97cb8c6ce60f95c24852578eac.1593788312.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-21dt-bindings: reset: Add binding constants for Actions S500 RMUCristian Ciocaltea
Add device tree binding constants for Actions Semi S500 SoC Reset Management Unit (RMU). Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/daf615160b3be9f38dcf7926cc82128c9c2d73e3.1593788312.git.cristian.ciocaltea@gmail.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-21clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoCCristian Ciocaltea
Add support for the missing APB, DMAC and GPIO clocks in the Actions Semi S500 SoC clock driver. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Link: https://lore.kernel.org/r/87964ae012e513597b8b4c7be2e7ac332a70087a.1593788312.git.cristian.ciocaltea@gmail.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-21dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoCCristian Ciocaltea
Add the missing APB, DMAC and GPIO clock bindings constants for Actions Semi S500 SoC. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Link: https://lore.kernel.org/r/67112af4f5bc0cc5e70ce8410feb369cc72972b8.1593788312.git.cristian.ciocaltea@gmail.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-21clk: actions: Fix h_clk for Actions S500 SoCCristian Ciocaltea
The h_clk clock in the Actions Semi S500 SoC clock driver has an invalid parent. Replace with the correct one. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/c57e7ebabfa970014f073b92fe95b47d3e5a70b1.1593788312.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-21Merge tag 'clk-imx-5.9' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-imx Pull i.MX clk updates from Shawn Guo: - Add CAAM clock support for vf610 driver - Add MU root clock support for imx8mp driver * tag 'clk-imx-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: clk: imx: vf610: add CAAM clock clk: imx8mp: add mu root clk
2020-07-21Merge tag 'clk-meson-v5.9-1' of https://github.com/BayLibre/clk-meson into ↵Stephen Boyd
clk-amlogic Pull Amlogic clk driver updates from Jerome Brunet: - g12: add neural network accelerator clock sources - meson8: remove critical flag for main PLL divider - meson8: add video decoder clock gates * tag 'clk-meson-v5.9-1' of https://github.com/BayLibre/clk-meson: clk: meson: meson8b: add the vclk2_en gate clock clk: meson: meson8b: add the vclk_en gate clock clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2 clk: meson: g12a: Add support for NNA CLK source clocks dt-bindings: clk: g12a-clkc: Add NNA CLK Source clock IDs
2020-07-21Merge tag 'clk-renesas-for-v5.9-tag2' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas Pull Renesas clk driver updates from Geert Uytterhoeven: - Add support for the new RZ/G2H (R8A774E1) SoC * tag 'clk-renesas-for-v5.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: cpg-mssr: Add r8a774e1 support dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1 clk: renesas: Add r8a774e1 CPG Core Clock Definitions dt-bindings: power: Add r8a774e1 SYSC power domain definitions
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-17 21:41:42 +0000