summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-05Merge tag 'v5.4.75' into 5.4-2.1.x-imxAndrey Zhizhikin
This is the 5.4.75 stable release Conflicts: - drivers/i2c/busses/i2c-imx.c: Drop NXP changes, which are covered by commit [2c58d5e0c754c] from upstream. - drivers/net/can/flexcan.c: Keep NXP implementation, patch [ca10989632d88] from upstream is covered in the NXP tree. - drivers/usb/host/xhci.h: Fix merge fuzz for upstream commit [2600a131e1f61] Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2020-11-05Linux 5.4.75Greg Kroah-Hartman
Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20201103203249.448706377@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05staging: octeon: Drop on uncorrectable alignment or FCS errorAlexander Sverdlin
commit 49d28ebdf1e30d806410eefc7de0a7a1ca5d747c upstream. Currently in case of alignment or FCS error if the packet cannot be corrected it's still not dropped. Report the error properly and drop the packet while making the code around a little bit more readable. Fixes: 80ff0fd3ab64 ("Staging: Add octeon-ethernet driver files.") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201016145630.41852-1-alexander.sverdlin@nokia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05staging: octeon: repair "fixed-link" supportAlexander Sverdlin
commit 179f5dc36b0a1aa31538d7d8823deb65c39847b3 upstream. The PHYs must be registered once in device probe function, not in device open callback because it's only possible to register them once. Fixes: a25e278020bf ("staging: octeon: support fixed-link phys") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201016101858.11374-1-alexander.sverdlin@nokia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05staging: comedi: cb_pcidas: Allow 2-channel commands for AO subdeviceIan Abbott
commit 647a6002cb41d358d9ac5de101a8a6dc74748a59 upstream. The "cb_pcidas" driver supports asynchronous commands on the analog output (AO) subdevice for those boards that have an AO FIFO. The code (in `cb_pcidas_ao_check_chanlist()` and `cb_pcidas_ao_cmd()`) to validate and set up the command supports output to a single channel or to two channels simultaneously (the boards have two AO channels). However, the code in `cb_pcidas_auto_attach()` that initializes the subdevices neglects to initialize the AO subdevice's `len_chanlist` member, leaving it set to 0, but the Comedi core will "correct" it to 1 if the driver neglected to set it. This limits commands to use a single channel (either channel 0 or 1), but the limit should be two channels. Set the AO subdevice's `len_chanlist` member to be the same value as the `n_chan` member, which will be 2. Cc: <stable@vger.kernel.org> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20201021122142.81628-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05staging: fieldbus: anybuss: jump to correct label in an error pathJing Xiangfeng
commit 7e97e4cbf30026b49b0145c3bfe06087958382c5 upstream. In current code, controller_probe() misses to call ida_simple_remove() in an error path. Jump to correct label to fix it. Fixes: 17614978ed34 ("staging: fieldbus: anybus-s: support the Arcx anybus controller") Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201012132404.113031-1-jingxiangfeng@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05KVM: arm64: Fix AArch32 handling of DBGD{CCINT,SCRext} and DBGVCRMarc Zyngier
commit 4a1c2c7f63c52ccb11770b5ae25920a6b79d3548 upstream. The DBGD{CCINT,SCRext} and DBGVCR register entries in the cp14 array are missing their target register, resulting in all accesses being targetted at the guard sysreg (indexed by __INVALID_SYSREG__). Point the emulation code at the actual register entries. Fixes: bdfb4b389c8d ("arm64: KVM: add trap handlers for AArch32 debug registers") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201029172409.2768336-1-maz@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05device property: Don't clear secondary pointer for shared primary firmware nodeAndy Shevchenko
commit 99aed9227073fb34ce2880cbc7063e04185a65e1 upstream. It appears that firmware nodes can be shared between devices. In such case when a (child) device is about to be deleted, its firmware node may be shared and ACPI_COMPANION_SET(..., NULL) call for it breaks the secondary link of the shared primary firmware node. In order to prevent that, check, if the device has a parent and parent's firmware node is shared with its child, and avoid crashing the link. Fixes: c15e1bdda436 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()") Reported-by: Ferry Toth <fntoth@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Ferry Toth <fntoth@gmail.com> Cc: 5.9+ <stable@vger.kernel.org> # 5.9+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05device property: Keep secondary firmware node secondary by typeAndy Shevchenko
commit d5dcce0c414fcbfe4c2037b66ac69ea5f9b3f75c upstream. Behind primary and secondary we understand the type of the nodes which might define their ordering. However, if primary node gone, we can't maintain the ordering by definition of the linked list. Thus, by ordering secondary node becomes first in the list. But in this case the meaning of it is still secondary (or auxiliary). The type of the node is maintained by the secondary pointer in it: secondary pointer Meaning NULL or valid primary node ERR_PTR(-ENODEV) secondary node So, if by some reason we do the following sequence of calls set_primary_fwnode(dev, NULL); set_primary_fwnode(dev, primary); we should preserve secondary node. This concept is supported by the description of set_primary_fwnode() along with implementation of set_secondary_fwnode(). Hence, fix the commit c15e1bdda436 to follow this as well. Fixes: c15e1bdda436 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()") Cc: Ferry Toth <fntoth@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Ferry Toth <fntoth@gmail.com> Cc: 5.9+ <stable@vger.kernel.org> # 5.9+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05ARM: s3c24xx: fix missing system resetKrzysztof Kozlowski
commit f6d7cde84f6c5551586c8b9b68d70f8e6dc9a000 upstream. Commit f6361c6b3880 ("ARM: S3C24XX: remove separate restart code") removed usage of the watchdog reset platform code in favor of the Samsung SoC watchdog driver. However the latter was not selected thus S3C24xx platforms lost reset abilities. Cc: <stable@vger.kernel.org> Fixes: f6361c6b3880 ("ARM: S3C24XX: remove separate restart code") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05ARM: samsung: fix PM debug build with DEBUG_LL but !MMUKrzysztof Kozlowski
commit 7be0d19c751b02db778ca95e3274d5ea7f31891c upstream. Selecting CONFIG_SAMSUNG_PM_DEBUG (depending on CONFIG_DEBUG_LL) but without CONFIG_MMU leads to build errors: arch/arm/plat-samsung/pm-debug.c: In function ‘s3c_pm_uart_base’: arch/arm/plat-samsung/pm-debug.c:57:2: error: implicit declaration of function ‘debug_ll_addr’ [-Werror=implicit-function-declaration] Fixes: 99b2fc2b8b40 ("ARM: SAMSUNG: Use debug_ll_addr() to get UART base address") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200910154150.3318-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05arm: dts: mt7623: add missing pause for switchportFrank Wunderlich
commit 36f0a5fc5284838c544218666c63ee8cfa46a9c3 upstream. port6 of mt7530 switch (= cpu port 0) on bananapi-r2 misses pause option which causes rx drops on running iperf. Fixes: f4ff257cd160 ("arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board") Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200907070517.51715-1-linux@fw-web.de Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05hil/parisc: Disable HIL driver when it gets stuckHelge Deller
commit 879bc2d27904354b98ca295b6168718e045c4aa2 upstream. When starting a HP machine with HIL driver but without an HIL keyboard or HIL mouse attached, it may happen that data written to the HIL loop gets stuck (e.g. because the transaction queue is full). Usually one will then have to reboot the machine because all you see is and endless output of: Transaction add failed: transaction already queued? In the higher layers hp_sdc_enqueue_transaction() is called to queued up a HIL packet. This function returns an error code, and this patch adds the necessary checks for this return code and disables the HIL driver if further packets can't be sent. Tested on a HP 730 and a HP 715/64 machine. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05cachefiles: Handle readpage error correctlyMatthew Wilcox (Oracle)
commit 9480b4e75b7108ee68ecf5bc6b4bd68e8031c521 upstream. If ->readpage returns an error, it has already unlocked the page. Fixes: 5e929b33c393 ("CacheFiles: Handle truncate unlocking the page we're reading") Cc: stable@vger.kernel.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05arm64: berlin: Select DW_APB_TIMER_OFJisheng Zhang
commit b0fc70ce1f028e14a37c186d9f7a55e51439b83a upstream. Berlin SoCs always contain some DW APB timers which can be used as an always-on broadcast timer. Link: https://lore.kernel.org/r/20201009150536.214181fb@xhacker.debian Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05tty: make FONTX ioctl use the tty pointer they were actually passedLinus Torvalds
commit 90bfdeef83f1d6c696039b6a917190dcbbad3220 upstream. Some of the font tty ioctl's always used the current foreground VC for their operations. Don't do that then. This fixes a data race on fg_console. Side note: both Michael Ellerman and Jiri Slaby point out that all these ioctls are deprecated, and should probably have been removed long ago, and everything seems to be using the KDFONTOP ioctl instead. In fact, Michael points out that it looks like busybox's loadfont program seems to have switched over to using KDFONTOP exactly _because_ of this bug (ahem.. 12 years ago ;-). Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Jiri Slaby <jirislaby@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/amd/pm: increase mclk switch threshold to 200 usEvan Quan
commit 83da6eea3af669ee0b1f1bc05ffd6150af984994 upstream. To avoid underflow seen on Polaris10 with some 3440x1440 144Hz displays. As the threshold of 190 us cuts too close to minVBlankTime of 192 us. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05mmc: sdhci: Use Auto CMD Auto Select only when v4_mode is trueJisheng Zhang
commit b3e1ea16fb39fb6e1a1cf1dbdd6738531de3dc7d upstream. sdhci-of-dwcmshc meets an eMMC read performance regression with below command after commit 427b6514d095 ("mmc: sdhci: Add Auto CMD Auto Select support"): dd if=/dev/mmcblk0 of=/dev/null bs=8192 count=100000 Before the commit, the above command gives 120MB/s After the commit, the above command gives 51.3 MB/s So it looks like sdhci-of-dwcmshc expects Version 4 Mode for Auto CMD Auto Select. Fix the performance degradation by ensuring v4_mode is true to use Auto CMD Auto Select. Fixes: 427b6514d095 ("mmc: sdhci: Add Auto CMD Auto Select support") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201015174115.4cf2c19a@xhacker.debian Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05mmc: sdhci-of-esdhc: set timeout to max before tuningMichael Walle
commit 0add6e9b88d0632a25323aaf4987dbacb0e4ae64 upstream. On rare occations there is the following error: mmc0: Tuning timeout, falling back to fixed sampling clock There are SD cards which takes a significant longer time to reply to the first CMD19 command. The eSDHC takes the data timeout value into account during the tuning period. The SDHCI core doesn't explicitly set this timeout for the tuning procedure. Thus on the slow cards, there might be a spurious "Buffer Read Ready" interrupt, which in turn triggers a wrong sequence of events. In the end this will lead to an unsuccessful tuning procedure and to the above error. To workaround this, set the timeout to the maximum value (which is the best we can do) and the SDHCI core will take care of the proper timeout handling. Fixes: ba49cbd0936e ("mmc: sdhci-of-esdhc: add tuning support") Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201022222337.19857-1-michael@walle.cc Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/ttm: fix eviction valuable range check.Dave Airlie
commit fea456d82c19d201c21313864105876deabe148b upstream. This was adding size to start, but pfn and start are in pages, so it should be using num_pages. Not sure this fixes anything in the real world, just noticed it during refactoring. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20201019222257.1684769-2-airlied@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05ext4: fix invalid inode checksumLuo Meng
commit 1322181170bb01bce3c228b82ae3d5c6b793164f upstream. During the stability test, there are some errors: ext4_lookup:1590: inode #6967: comm fsstress: iget: checksum invalid. If the inode->i_iblocks too big and doesn't set huge file flag, checksum will not be recalculated when update the inode information to it's buffer. If other inode marks the buffer dirty, then the inconsistent inode will be flushed to disk. Fix this problem by checking i_blocks in advance. Cc: stable@kernel.org Signed-off-by: Luo Meng <luomeng12@huawei.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Link: https://lore.kernel.org/r/20201020013631.3796673-1-luomeng12@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05ext4: fix error handling code in add_new_gdbDinghao Liu
commit c9e87161cc621cbdcfc472fa0b2d81c63780c8f5 upstream. When ext4_journal_get_write_access() fails, we should terminate the execution flow and release n_group_desc, iloc.bh, dind and gdb_bh. Cc: stable@kernel.org Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20200829025403.3139-1-dinghao.liu@zju.edu.cn Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05ext4: fix leaking sysfs kobject after failed mountEric Biggers
commit cb8d53d2c97369029cc638c9274ac7be0a316c75 upstream. ext4_unregister_sysfs() only deletes the kobject. The reference to it needs to be put separately, like ext4_put_super() does. This addresses the syzbot report "memory leak in kobject_set_name_vargs (3)" (https://syzkaller.appspot.com/bug?extid=9f864abad79fae7c17e1). Reported-by: syzbot+9f864abad79fae7c17e1@syzkaller.appspotmail.com Fixes: 72ba74508b28 ("ext4: release sysfs kobject when failing to enable quotas on mount") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20200922162456.93657-1-ebiggers@kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05vringh: fix __vringh_iov() when riov and wiov are differentStefano Garzarella
commit 5745bcfbbf89b158416075374254d3c013488f21 upstream. If riov and wiov are both defined and they point to different objects, only riov is initialized. If the wiov is not initialized by the caller, the function fails returning -EINVAL and printing "Readable desc 0x... after writable" error message. This issue happens when descriptors have both readable and writable buffers (eg. virtio-blk devices has virtio_blk_outhdr in the readable buffer and status as last byte of writable buffer) and we call __vringh_iov() to get both type of buffers in two different iovecs. Let's replace the 'else if' clause with 'if' to initialize both riov and wiov if they are not NULL. As checkpatch pointed out, we also avoid crashing the kernel when riov and wiov are both NULL, replacing BUG() with WARN_ON() and returning -EINVAL. Fixes: f87d0fbb5798 ("vringh: host-side implementation of virtio rings.") Cc: stable@vger.kernel.org Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20201008204256.162292-1-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05ring-buffer: Return 0 on success from ring_buffer_resize()Qiujun Huang
commit 0a1754b2a97efa644aa6e84d1db5b17c42251483 upstream. We don't need to check the new buffer size, and the return value had confused resize_buffer_duplicate_size(). ... ret = ring_buffer_resize(trace_buf->buffer, per_cpu_ptr(size_buf->data,cpu_id)->entries, cpu_id); if (ret == 0) per_cpu_ptr(trace_buf->data, cpu_id)->entries = per_cpu_ptr(size_buf->data, cpu_id)->entries; ... Link: https://lkml.kernel.org/r/20201019142242.11560-1-hqjagain@gmail.com Cc: stable@vger.kernel.org Fixes: d60da506cbeb3 ("tracing: Add a resize function to make one buffer equivalent to another buffer") Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-059P: Cast to loff_t before multiplyingMatthew Wilcox (Oracle)
commit f5f7ab168b9a60e12a4b8f2bb6fcc91321dc23c1 upstream. On 32-bit systems, this multiplication will overflow for files larger than 4GB. Link: http://lkml.kernel.org/r/20201004180428.14494-2-willy@infradead.org Cc: stable@vger.kernel.org Fixes: fb89b45cdfdc ("9P: introduction of a new cache=mmap model.") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05libceph: clear con->out_msg on Policy::stateful_server faultsIlya Dryomov
commit 28e1581c3b4ea5f98530064a103c6217bedeea73 upstream. con->out_msg must be cleared on Policy::stateful_server (!CEPH_MSG_CONNECT_LOSSY) faults. Not doing so botches the reconnection attempt, because after writing the banner the messenger moves on to writing the data section of that message (either from where it got interrupted by the connection reset or from the beginning) instead of writing struct ceph_msg_connect. This results in a bizarre error message because the server sends CEPH_MSGR_TAG_BADPROTOVER but we think we wrote struct ceph_msg_connect: libceph: mds0 (1)172.21.15.45:6828 socket error on write ceph: mds0 reconnect start libceph: mds0 (1)172.21.15.45:6829 socket closed (con state OPEN) libceph: mds0 (1)172.21.15.45:6829 protocol version mismatch, my 32 != server's 32 libceph: mds0 (1)172.21.15.45:6829 protocol version mismatch AFAICT this bug goes back to the dawn of the kernel client. The reason it survived for so long is that only MDS sessions are stateful and only two MDS messages have a data section: CEPH_MSG_CLIENT_RECONNECT (always, but reconnecting is rare) and CEPH_MSG_CLIENT_REQUEST (only when xattrs are involved). The connection has to get reset precisely when such message is being sent -- in this case it was the former. Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/47723 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05ceph: promote to unsigned long long before shiftingMatthew Wilcox (Oracle)
commit c403c3a2fbe24d4ed33e10cabad048583ebd4edf upstream. On 32-bit systems, this shift will overflow for files larger than 4GB. Cc: stable@vger.kernel.org Fixes: 61f68816211e ("ceph: check caps in filemap_fault and page_mkwrite") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/amd/display: Fix kernel panic by dal_gpio_open() errorTakashi Iwai
commit 920bb38c518408fa2600eaefa0af9e82cf48f166 upstream. Currently both error code paths handled in dal_gpio_open_ex() issues ASSERT_CRITICAL(), and this leads to a kernel panic unnecessarily if CONFIG_KGDB is enabled. Since basically both are non-critical errors and can be recovered, drop those assert calls and use a safer one, BREAK_TO_DEBUGGER(), for allowing the debugging, instead. BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1177973 Cc: <stable@vger.kernel.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/amd/display: Don't invoke kgdb_breakpoint() unconditionallyTakashi Iwai
commit 8b7dc1fe1a5c1093551f6cd7dfbb941bd9081c2e upstream. ASSERT_CRITICAL() invokes kgdb_breakpoint() whenever either CONFIG_KGDB or CONFIG_HAVE_KGDB is set. This, however, may lead to a kernel panic when no kdb stuff is attached, since the kgdb_breakpoint() call issues INT3. It's nothing but a surprise for normal end-users. For avoiding the pitfall, make the kgdb_breakpoint() call only when CONFIG_DEBUG_KERNEL_DC is set. https://bugzilla.opensuse.org/show_bug.cgi?id=1177973 Cc: <stable@vger.kernel.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/amdgpu: increase the reserved VM size to 2MBChristian König
commit 55bb919be4e4973cd037a04f527ecc6686800437 upstream. Ideally this should be a multiple of the VM block size. 2MB should at least fit for Vega/Navi. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/amd/display: Avoid MST manager resource leak.Andrey Grodzovsky
commit 5dff80bdce9e385af5716ed083f9e33e814484ab upstream. On connector destruction call drm_dp_mst_topology_mgr_destroy to release resources allocated in drm_dp_mst_topology_mgr_init. Do it only if MST manager was initilized before otherwsie a crash is seen on driver unload/device unplug. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/amdkfd: Use same SQ prefetch setting as amdgpuJay Cornwall
commit d56b1980d7efe9ef08469e856fc0703d0cef65e4 upstream. 0 causes instruction fetch stall at cache line boundary under some conditions on Navi10. A non-zero prefetch is the preferred default in any case. Fixes soft hang in Luxmark. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/amdgpu: correct the gpu reset handling for job != NULL caseEvan Quan
commit 207ac684792560acdb9e06f9d707ebf63c84b0e0 upstream. Current code wrongly treat all cases as job == NULL. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-and-tested-by: Jane Jian <Jane.Jian@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/amd/display: Increase timeout for DP DisableWesley Chalmers
commit 37b7cb10f07c1174522faafc1d51c6591b1501d4 upstream. [WHY] When disabling DP video, the current REG_WAIT timeout of 50ms is too low for certain cases with very high VSYNC intervals. [HOW] Increase the timeout to 102ms, so that refresh rates as low as 10Hz can be handled properly. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05drm/amdgpu: don't map BO in reserved regionMadhav Chauhan
commit c4aa8dff6091cc9536aeb255e544b0b4ba29faf4 upstream. 2MB area is reserved at top inside VM. Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Madhav Chauhan <madhav.chauhan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05i2c: imx: Fix external abort on interrupt in exit pathsKrzysztof Kozlowski
commit e50e4f0b85be308a01b830c5fbdffc657e1a6dd0 upstream. If interrupt comes late, during probe error path or device remove (could be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler i2c_imx_isr() will access registers with the clock being disabled. This leads to external abort on non-linefetch on Toradex Colibri VF50 module (with Vybrid VF5xx): Unhandled fault: external abort on non-linefetch (0x1008) at 0x8882d003 Internal error: : 1008 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0 #607 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) (i2c_imx_isr) from [<8017009c>] (free_irq+0x25c/0x3b0) (free_irq) from [<805844ec>] (release_nodes+0x178/0x284) (release_nodes) from [<80580030>] (really_probe+0x10c/0x348) (really_probe) from [<80580380>] (driver_probe_device+0x60/0x170) (driver_probe_device) from [<80580630>] (device_driver_attach+0x58/0x60) (device_driver_attach) from [<805806bc>] (__driver_attach+0x84/0xc0) (__driver_attach) from [<8057e228>] (bus_for_each_dev+0x68/0xb4) (bus_for_each_dev) from [<8057f3ec>] (bus_add_driver+0x144/0x1ec) (bus_add_driver) from [<80581320>] (driver_register+0x78/0x110) (driver_register) from [<8010213c>] (do_one_initcall+0xa8/0x2f4) (do_one_initcall) from [<80c0100c>] (kernel_init_freeable+0x178/0x1dc) (kernel_init_freeable) from [<80807048>] (kernel_init+0x8/0x110) (kernel_init) from [<80100114>] (ret_from_fork+0x14/0x20) Additionally, the i2c_imx_isr() could wake up the wait queue (imx_i2c_struct->queue) before its initialization happens. The resource-managed framework should not be used for interrupt handling, because the resource will be released too late - after disabling clocks. The interrupt handler is not prepared for such case. Fixes: 1c4b6c3bcf30 ("i2c: imx: implement bus recovery") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05rtc: rx8010: don't modify the global rtc opsBartosz Golaszewski
commit d3b14296da69adb7825022f3224ac6137eb30abf upstream. The way the driver is implemented is buggy for the (admittedly unlikely) use case where there are two RTCs with one having an interrupt configured and the second not. This is caused by the fact that we use a global rtc_class_ops struct which we modify depending on whether the irq number is present or not. Fix it by using two const ops structs with and without alarm operations. While at it: not being able to request a configured interrupt is an error so don't ignore it and bail out of probe(). Fixes: ed13d89b08e3 ("rtc: Add Epson RX8010SJ RTC driver") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200914154601.32245-2-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05ia64: fix build error with !COREDUMPKrzysztof Kozlowski
commit 7404840d87557c4092bf0272bce5e0354c774bf9 upstream. Fix linkage error when CONFIG_BINFMT_ELF is selected but CONFIG_COREDUMP is not: ia64-linux-ld: arch/ia64/kernel/elfcore.o: in function `elf_core_write_extra_phdrs': elfcore.c:(.text+0x172): undefined reference to `dump_emit' ia64-linux-ld: arch/ia64/kernel/elfcore.o: in function `elf_core_write_extra_data': elfcore.c:(.text+0x2b2): undefined reference to `dump_emit' Fixes: 1fcccbac89f5 ("elf coredump: replace ELF_CORE_EXTRA_* macros by functions") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200819064146.12529-1-krzk@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05ubi: check kthread_should_stop() after the setting of task stateZhihao Cheng
commit d005f8c6588efcfbe88099b6edafc6f58c84a9c1 upstream. A detach hung is possible when a race occurs between the detach process and the ubi background thread. The following sequences outline the race: ubi thread: if (list_empty(&ubi->works)... ubi detach: set_bit(KTHREAD_SHOULD_STOP, &kthread->flags) => by kthread_stop() wake_up_process() => ubi thread is still running, so 0 is returned ubi thread: set_current_state(TASK_INTERRUPTIBLE) schedule() => ubi thread will never be scheduled again ubi detach: wait_for_completion() => hung task! To fix that, we need to check kthread_should_stop() after we set the task state, so the ubi thread will either see the stop bit and exit or the task state is reset to runnable such that it isn't scheduled out indefinitely. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Cc: <stable@vger.kernel.org> Fixes: 801c135ce73d5df1ca ("UBI: Unsorted Block Images") Reported-by: syzbot+853639d0cb16c31c7a14@syzkaller.appspotmail.com Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05ARC: perf: redo the pct irq missing in device-tree handlingVineet Gupta
commit 8c42a5c02bec6c7eccf08957be3c6c8fccf9790b upstream. commit feb92d7d3813456c11dce21 "(ARC: perf: don't bail setup if pct irq missing in device-tree)" introduced a silly brown-paper bag bug: The assignment and comparison in an if statement were not bracketed correctly leaving the order of evaluation undefined. | | if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) { | ^^^ ^^^^ And given such a chance, the compiler will bite you hard, fully entitled to generating this piece of beauty: | | # if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) { | | bl.d @platform_get_irq <-- irq returned in r0 | | setge r2, r0, 0 <-- r2 is bool 1 or 0 if irq >= 0 true/false | brlt.d r0, 0, @.L114 | | st_s r2,[sp] <-- irq saved is bool 1 or 0, not actual return val | st 1,[r3,160] # arc_pmu.18_29->irq <-- drops bool and assumes 1 | | # return __request_percpu_irq(irq, handler, 0, | | bl.d @__request_percpu_irq; | mov_s r0,1 <-- drops even bool and assumes 1 which fails With the snafu fixed, everything is as expected. | bl.d @platform_get_irq <-- returns irq in r0 | | mov_s r2,r0 | brlt.d r2, 0, @.L112 | | st_s r0,[sp] <-- irq isaved is actual return value above | st r0,[r13,160] #arc_pmu.18_27->irq | | bl.d @__request_percpu_irq <-- r0 unchanged so actual irq returned | add r4,r4,r12 #, tmp363, __ptr Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05perf python scripting: Fix printable strings in python3 scriptsJiri Olsa
commit 6fcd5ddc3b1467b3586972ef785d0d926ae4cdf4 upstream. Hagen reported broken strings in python3 tracepoint scripts: make PYTHON=python3 perf record -e sched:sched_switch -a -- sleep 5 perf script --gen-script py perf script -s ./perf-script.py [..] sched__sched_switch 7 563231.759525792 0 swapper prev_comm=bytearray(b'swapper/7\x00\x00\x00\x00\x00\x00\x00'), prev_pid=0, prev_prio=120, prev_state=, next_comm=bytearray(b'mutex-thread-co\x00'), The problem is in the is_printable_array function that does not take the zero byte into account and claim such string as not printable, so the code will create byte array instead of string. Committer testing: After this fix: sched__sched_switch 3 484522.497072626 1158680 kworker/3:0-eve prev_comm=kworker/3:0, prev_pid=1158680, prev_prio=120, prev_state=I, next_comm=swapper/3, next_pid=0, next_prio=120 Sample: {addr=0, cpu=3, datasrc=84410401, datasrc_decode=N/A|SNP N/A|TLB N/A|LCK N/A, ip=18446744071841817196, period=1, phys_addr=0, pid=1158680, tid=1158680, time=484522497072626, transaction=0, values=[(0, 0)], weight=0} sched__sched_switch 4 484522.497085610 1225814 perf prev_comm=perf, prev_pid=1225814, prev_prio=120, prev_state=, next_comm=migration/4, next_pid=30, next_prio=0 Sample: {addr=0, cpu=4, datasrc=84410401, datasrc_decode=N/A|SNP N/A|TLB N/A|LCK N/A, ip=18446744071841817196, period=1, phys_addr=0, pid=1225814, tid=1225814, time=484522497085610, transaction=0, values=[(0, 0)], weight=0} Fixes: 249de6e07458 ("perf script python: Fix string vs byte array resolving") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200928201135.3633850-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05ubifs: mount_ubifs: Release authentication resource in error handling pathZhihao Cheng
commit e2a05cc7f8229e150243cdae40f2af9021d67a4a upstream. Release the authentication related resource in some error handling branches in mount_ubifs(). Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Cc: <stable@vger.kernel.org> # 4.20+ Fixes: d8a22773a12c6d7 ("ubifs: Enable authentication support") Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05ubifs: Don't parse authentication mount options in remount processZhihao Cheng
commit bb674a4d4de1032837fcbf860a63939e66f0b7ad upstream. There is no need to dump authentication options while remounting, because authentication initialization can only be doing once in the first mount process. Dumping authentication mount options in remount process may cause memory leak if UBIFS has already been mounted with old authentication mount options. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Cc: <stable@vger.kernel.org> # 4.20+ Fixes: d8a22773a12c6d7 ("ubifs: Enable authentication support") Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05ubifs: Fix a memleak after dumping authentication mount optionsZhihao Cheng
commit 47f6d9ce45b03a40c34b668a9884754c58122b39 upstream. Fix a memory leak after dumping authentication mount options in error handling branch. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Cc: <stable@vger.kernel.org> # 4.20+ Fixes: d8a22773a12c6d7 ("ubifs: Enable authentication support") Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05ubifs: journal: Make sure to not dirty twice for auth nodesRichard Weinberger
commit 78c7d49f55d8631b67c09f9bfbe8155211a9ea06 upstream. When removing the last reference of an inode the size of an auth node is already part of write_len. So we must not call ubifs_add_auth_dirt(). Call it only when needed. Cc: <stable@vger.kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Kristof Havasi <havasiefr@gmail.com> Fixes: 6a98bc4614de ("ubifs: Add authentication nodes to journal") Reported-and-tested-by: Kristof Havasi <havasiefr@gmail.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05ubifs: xattr: Fix some potential memory leaks while iterating entriesZhihao Cheng
commit f2aae745b82c842221f4f233051f9ac641790959 upstream. Fix some potential memory leaks in error handling branches while iterating xattr entries. For example, function ubifs_tnc_remove_ino() forgets to free pxent if it exists. Similar problems also exist in ubifs_purge_xattrs(), ubifs_add_orphan() and ubifs_jnl_write_inode(). Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Cc: <stable@vger.kernel.org> Fixes: 1e51764a3c2ac05a2 ("UBIFS: add new flash file system") Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05ubifs: dent: Fix some potential memory leaks while iterating entriesZhihao Cheng
commit 58f6e78a65f1fcbf732f60a7478ccc99873ff3ba upstream. Fix some potential memory leaks in error handling branches while iterating dent entries. For example, function dbg_check_dir() forgets to free pdent if it exists. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Cc: <stable@vger.kernel.org> Fixes: 1e51764a3c2ac05a2 ("UBIFS: add new flash file system") Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05NFSD: Add missing NFSv2 .pc_func methodsChuck Lever
commit 6b3dccd48de8a4c650b01499a0b09d1e2279649e upstream. There's no protection in nfsd_dispatch() against a NULL .pc_func helpers. A malicious NFS client can trigger a crash by invoking the unused/unsupported NFSv2 ROOT or WRITECACHE procedures. The current NFSD dispatcher does not support returning a void reply to a non-NULL procedure, so the reply to both of these is wrong, for the moment. Cc: <stable@vger.kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05NFSv4.2: support EXCHGID4_FLAG_SUPP_FENCE_OPS 4.2 EXCHANGE_ID flagOlga Kornievskaia
commit 8c39076c276be0b31982e44654e2c2357473258a upstream. RFC 7862 introduced a new flag that either client or server is allowed to set: EXCHGID4_FLAG_SUPP_FENCE_OPS. Client needs to update its bitmask to allow for this flag value. v2: changed minor version argument to unsigned int Signed-off-by: Olga Kornievskaia <kolga@netapp.com> CC: <stable@vger.kernel.org> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-08 09:08:09 +0000