summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-07-20mfd: cpcap: Fix cpcap dmamask not set warningsTony Lindgren
[ Upstream commit 0b7cbe811ca524295ea43d9a4d73d3427e419c54 ] We have started to get a bunch of pointless dmamask not set warnings that makes the output of dmesg -l err,warn hard to read with many extra warnings: cpcap-regulator cpcap-regulator.0: DMA mask not set cpcap_adc cpcap_adc.0: DMA mask not set cpcap_battery cpcap_battery.0: DMA mask not set cpcap-charger cpcap-charger.0: DMA mask not set cpcap-pwrbutton cpcap-pwrbutton.0: DMA mask not set cpcap-led cpcap-led.0: DMA mask not set cpcap-led cpcap-led.1: DMA mask not set cpcap-led cpcap-led.2: DMA mask not set cpcap-led cpcap-led.3: DMA mask not set cpcap-led cpcap-led.4: DMA mask not set cpcap-rtc cpcap-rtc.0: DMA mask not set cpcap-usb-phy cpcap-usb-phy.0: DMA mask not set This seems to have started with commit 4d8bde883bfb ("OF: Don't set default coherent DMA mask"). We have the parent SPI controller use DMA, while CPCAP driver and it's children do not. For audio, the DMA is handled over I2S bus with the McBSP driver. Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Ivan Jelincic <parazyd@dyne.org> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sicelo A. Mhlongo <absicsz@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20mfd: da9052/stmpe: Add and modify MODULE_DEVICE_TABLEZou Wei
[ Upstream commit 4700ef326556ed74aba188f12396740a8c1c21dd ] This patch adds/modifies MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: qedi: Fix null ref during abort handlingMike Christie
[ Upstream commit 5777b7f0f03ce49372203b6521631f62f2810c8f ] If qedi_process_cmd_cleanup_resp finds the cmd it frees the work and sets list_tmf_work to NULL, so qedi_tmf_work should check if list_tmf_work is non-NULL when it wants to force cleanup. Link: https://lore.kernel.org/r/20210525181821.7617-20-michael.christie@oracle.com Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: iscsi: Fix shost->max_id useMike Christie
[ Upstream commit bdd4aad7ff92ae39c2e93c415bb6761cb8b584da ] The iscsi offload drivers are setting the shost->max_id to the max number of sessions they support. The problem is that max_id is not the max number of targets but the highest identifier the targets can have. To use it to limit the number of targets we need to set it to max sessions - 1, or we can end up with a session we might not have preallocated resources for. Link: https://lore.kernel.org/r/20210525181821.7617-15-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: iscsi: Fix conn use after free during resetsMike Christie
[ Upstream commit ec29d0ac29be366450a7faffbcf8cba3a6a3b506 ] If we haven't done a unbind target call we can race where iscsi_conn_teardown wakes up the EH thread and then frees the conn while those threads are still accessing the conn ehwait. We can only do one TMF per session so this just moves the TMF fields from the conn to the session. We can then rely on the iscsi_session_teardown->iscsi_remove_session->__iscsi_unbind_session call to remove the target and it's devices, and know after that point there is no device or scsi-ml callout trying to access the session. Link: https://lore.kernel.org/r/20210525181821.7617-14-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: iscsi: Add iscsi_cls_conn refcount helpersMike Christie
[ Upstream commit b1d19e8c92cfb0ded180ef3376c20e130414e067 ] There are a couple places where we could free the iscsi_cls_conn while it's still in use. This adds some helpers to get/put a refcount on the struct and converts an exiting user. Subsequent commits will then use the helpers to fix 2 bugs in the eh code. Link: https://lore.kernel.org/r/20210525181821.7617-11-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: megaraid_sas: Handle missing interrupts while re-enabling IRQsChandrakanth Patil
[ Upstream commit 9bedd36e9146b34dda4d6994e3aa1d72bc6442c1 ] While reenabling the IRQ after IRQ poll there may be a small window for the firmware to post the replies with interrupts raised. In that case the driver will not see the interrupts which leads to I/O timeout. This issue only happens when there are many I/O completions on a single reply queue. This forces the driver to switch between the interrupt and IRQ context. Make the driver process the reply queue one more time after enabling the IRQ. Link: https://lore.kernel.org/linux-scsi/20201102072746.27410-1-sreekanth.reddy@broadcom.com/ Link: https://lore.kernel.org/r/20210528131307.25683-5-chandrakanth.patil@broadcom.com Cc: Tomas Henzl <thenzl@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: megaraid_sas: Early detection of VD deletion through RaidMap updateKashyap Desai
[ Upstream commit ae6874ba4b43c5a00065f48599811a09d33b873d ] Consider the case where a VD is deleted and the targetID of that VD is assigned to a newly created VD. If the sequence of deletion/addition of VD happens very quickly there is a possibility that second event (VD add) occurs even before the driver processes the first event (VD delete). As event processing is done in deferred context the device list remains the same (but targetID is re-used) so driver will not learn the VD deletion/additon. I/Os meant for the older VD will be directed to new VD which may lead to data corruption. Make driver detect the deleted VD as soon as possible based on the RaidMap update and block further I/O to that device. Link: https://lore.kernel.org/r/20210528131307.25683-4-chandrakanth.patil@broadcom.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: megaraid_sas: Fix resource leak in case of probe failureChandrakanth Patil
[ Upstream commit b5438f48fdd8e1c3f130d32637511efd32038152 ] The driver doesn't clean up all the allocated resources properly when scsi_add_host(), megasas_start_aen() function fails during the PCI device probe. Clean up all those resources. Link: https://lore.kernel.org/r/20210528131307.25683-3-chandrakanth.patil@broadcom.com Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20fs/jfs: Fix missing error code in lmLogInit()Jiapeng Chong
[ Upstream commit 492109333c29e1bb16d8732e1d597b02e8e0bf2e ] The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'rc. Eliminate the follow smatch warning: fs/jfs/jfs_logmgr.c:1327 lmLogInit() warn: missing error code 'rc'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: scsi_dh_alua: Check for negative result valueHannes Reinecke
[ Upstream commit 7e26e3ea028740f934477ec01ba586ab033c35aa ] scsi_execute() will now return a negative error if there was an error prior to command submission; evaluate that instead if checking for DRIVER_ERROR. [mkp: build fix] Link: https://lore.kernel.org/r/20210427083046.31620-6-hare@suse.de Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20tty: serial: 8250: serial_cs: Fix a memory leak in error handling pathChristophe JAILLET
[ Upstream commit fad92b11047a748c996ebd6cfb164a63814eeb2e ] In the probe function, if the final 'serial_config()' fails, 'info' is leaking. Add a resource handling path to free this memory. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/dc25f96b7faebf42e60fe8d02963c941cf4d8124.1621971720.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20ALSA: ac97: fix PM reference leak in ac97_bus_remove()Yufen Yu
[ Upstream commit a38e93302ee25b2ca6f4ee76c6c974cf3637985e ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Link: https://lore.kernel.org/r/20210524093811.612302-1-yuyufen@huawei.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: core: Cap scsi_host cmd_per_lun at can_queueJohn Garry
[ Upstream commit ea2f0f77538c50739b9fb4de4700cee5535e1f77 ] The sysfs handling function sdev_store_queue_depth() enforces that the sdev queue depth cannot exceed shost can_queue. The initial sdev queue depth comes from shost cmd_per_lun. However, the LLDD may manually set cmd_per_lun to be larger than can_queue, which leads to an initial sdev queue depth greater than can_queue. Such an issue was reported in [0], which caused a hang. That has since been fixed in commit fc09acb7de31 ("scsi: scsi_debug: Fix cmd_per_lun, set to max_queue"). Stop this possibly happening for other drivers by capping shost cmd_per_lun at shost can_queue. [0] https://lore.kernel.org/linux-scsi/YHaez6iN2HHYxYOh@T590/ Link: https://lore.kernel.org/r/1621434662-173079-1-git-send-email-john.garry@huawei.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: lpfc: Fix crash when lpfc_sli4_hba_setup() fails to initialize the SGLsJames Smart
[ Upstream commit 5aa615d195f1e142c662cb2253f057c9baec7531 ] The driver is encountering a crash in lpfc_free_iocb_list() while performing initial attachment. Code review found this to be an errant failure path that was taken, jumping to a tag that then referenced structures that were uninitialized. Fix the failure path. Link: https://lore.kernel.org/r/20210514195559.119853-9-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: lpfc: Fix "Unexpected timeout" error in direct attach topologyJames Smart
[ Upstream commit e30d55137edef47434c40d7570276a0846fe922c ] An 'unexpected timeout' message may be seen in a point-2-point topology. The message occurs when a PLOGI is received before the driver is notified of FLOGI completion. The FLOGI completion failure causes discovery to be triggered for a second time. The discovery timer is restarted but no new discovery activity is initiated, thus the timeout message eventually appears. In point-2-point, when discovery has progressed before the FLOGI completion is processed, it is not a failure. Add code to FLOGI completion to detect that discovery has progressed and exit the FLOGI handling (noop'ing it). Link: https://lore.kernel.org/r/20210514195559.119853-4-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: hisi_sas: Propagate errors in interrupt_init_v1_hw()Sergey Shtylyov
[ Upstream commit ab17122e758ef68fb21033e25c041144067975f5 ] After commit 6c11dc060427 ("scsi: hisi_sas: Fix IRQ checks") we have the error codes returned by platform_get_irq() ready for the propagation upsream in interrupt_init_v1_hw() -- that will fix still broken deferred probing. Let's propagate the error codes from devm_request_irq() as well since I don't see the reason to override them with -ENOENT... Link: https://lore.kernel.org/r/49ba93a3-d427-7542-d85a-b74fe1a33a73@omp.ru Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20w1: ds2438: fixing bug that would always get page0Luiz Sampaio
[ Upstream commit 1f5e7518f063728aee0679c5086b92d8ea429e11 ] The purpose of the w1_ds2438_get_page function is to get the register values at the page passed as the pageno parameter. However, the page0 was hardcoded, such that the function always returned the page0 contents. Fixed so that the function can retrieve any page. Signed-off-by: Luiz Sampaio <sampaio.ime@gmail.com> Link: https://lore.kernel.org/r/20210519223046.13798-5-sampaio.ime@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20Revert "ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro"Takashi Sakamoto
[ Upstream commit 5d6fb80a142b5994355ce675c517baba6089d199 ] This reverts commit 0edabdfe89581669609eaac5f6a8d0ae6fe95e7f. I've explained that optional FireWire card for d.2 is also built-in to d.2 Pro, however it's wrong. The optional card uses DM1000 ASIC and has 'Mackie DJ Mixer' in its model name of configuration ROM. On the other hand, built-in FireWire card for d.2 Pro and d.4 Pro uses OXFW971 ASIC and has 'd.Pro' in its model name according to manuals and user experiences. The former card is not the card for d.2 Pro. They are similar in appearance but different internally. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210518084557.102681-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20ALSA: usx2y: Don't call free_pages_exact() with NULL addressTakashi Iwai
[ Upstream commit cae0cf651adccee2c3f376e78f30fbd788d0829f ] Unlike some other functions, we can't pass NULL pointer to free_pages_exact(). Add a proper NULL check for avoiding possible Oops. Link: https://lore.kernel.org/r/20210517131545.27252-10-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20iio: magn: bmc150: Balance runtime pm + use pm_runtime_resume_and_get()Jonathan Cameron
[ Upstream commit 264da512431495e542fcaf56ffe75e7df0e7db74 ] probe() error paths after runtime pm is enabled, should disable it. remove() should not call pm_runtime_put_noidle() as there is no matching get() to have raised the reference count. This case has no affect a the runtime pm core protects against going negative. Whilst here use pm_runtime_resume_and_get() to tidy things up a little. coccicheck script didn't get this one due to complex code structure so found by inspection. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/20210509113354.660190-12-jic23@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20iio: gyro: fxa21002c: Balance runtime pm + use pm_runtime_resume_and_get().Jonathan Cameron
[ Upstream commit 41120ebbb1eb5e9dec93320e259d5b2c93226073 ] In both the probe() error path and remove() pm_runtime_put_noidle() is called which will decrement the runtime pm reference count. However, there is no matching function to have raised the reference count. Not this isn't a fix as the runtime pm core will stop the reference count going negative anyway. An alternative would have been to raise the count in these paths, but it is not clear why that would be necessary. Whilst we are here replace some boilerplate with pm_runtime_resume_and_get() Found using coccicheck script under review at: https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/ Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/20210509113354.660190-2-jic23@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20misc: alcor_pci: fix null-ptr-deref when there is no PCI bridgeTong Zhang
[ Upstream commit 3ce3e45cc333da707d4d6eb433574b990bcc26f5 ] There is an issue with the ASPM(optional) capability checking function. A device might be attached to root complex directly, in this case, bus->self(bridge) will be NULL, thus priv->parent_pdev is NULL. Since alcor_pci_init_check_aspm(priv->parent_pdev) checks the PCI link's ASPM capability and populate parent_cap_off, which will be used later by alcor_pci_aspm_ctrl() to dynamically turn on/off device, what we can do here is to avoid checking the capability if we are on the root complex. This will make pdev_cap_off 0 and alcor_pci_aspm_ctrl() will simply return when bring called, effectively disable ASPM for the device. [ 1.246492] BUG: kernel NULL pointer dereference, address: 00000000000000c0 [ 1.248731] RIP: 0010:pci_read_config_byte+0x5/0x40 [ 1.253998] Call Trace: [ 1.254131] ? alcor_pci_find_cap_offset.isra.0+0x3a/0x100 [alcor_pci] [ 1.254476] alcor_pci_probe+0x169/0x2d5 [alcor_pci] Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tong Zhang <ztong0001@gmail.com> Link: https://lore.kernel.org/r/20210513040732.1310159-1-ztong0001@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20misc/libmasm/module: Fix two use after free in ibmasm_init_oneLv Yunlong
[ Upstream commit 7272b591c4cb9327c43443f67b8fbae7657dd9ae ] In ibmasm_init_one, it calls ibmasm_init_remote_input_dev(). Inside ibmasm_init_remote_input_dev, mouse_dev and keybd_dev are allocated by input_allocate_device(), and assigned to sp->remote.mouse_dev and sp->remote.keybd_dev respectively. In the err_free_devices error branch of ibmasm_init_one, mouse_dev and keybd_dev are freed by input_free_device(), and return error. Then the execution runs into error_send_message error branch of ibmasm_init_one, where ibmasm_free_remote_input_dev(sp) is called to unregister the freed sp->remote.mouse_dev and sp->remote.keybd_dev. My patch add a "error_init_remote" label to handle the error of ibmasm_init_remote_input_dev(), to avoid the uaf bugs. Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Link: https://lore.kernel.org/r/20210426170620.10546-1-lyl2019@mail.ustc.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zeroSherry Sun
[ Upstream commit fcb10ee27fb91b25b68d7745db9817ecea9f1038 ] We should be very careful about the register values that will be used for division or modulo operations, althrough the possibility that the UARTBAUD register value is zero is very low, but we had better to deal with the "bad data" of hardware in advance to avoid division or modulo by zero leading to undefined kernel behavior. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20210427021226.27468-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20srcu: Fix broken node geometry after early ssp initFrederic Weisbecker
[ Upstream commit b5befe842e6612cf894cf4a199924ee872d8b7d8 ] An srcu_struct structure that is initialized before rcu_init_geometry() will have its srcu_node hierarchy based on CONFIG_NR_CPUS. Once rcu_init_geometry() is called, this hierarchy is compressed as needed for the actual maximum number of CPUs for this system. Later on, that srcu_struct structure is confused, sometimes referring to its initial CONFIG_NR_CPUS-based hierarchy, and sometimes instead to the new num_possible_cpus() hierarchy. For example, each of its ->mynode fields continues to reference the original leaf rcu_node structures, some of which might no longer exist. On the other hand, srcu_for_each_node_breadth_first() traverses to the new node hierarchy. There are at least two bad possible outcomes to this: 1) a) A callback enqueued early on an srcu_data structure (call it *sdp) is recorded pending on sdp->mynode->srcu_data_have_cbs in srcu_funnel_gp_start() with sdp->mynode pointing to a deep leaf (say 3 levels). b) The grace period ends after rcu_init_geometry() shrinks the nodes level to a single one. srcu_gp_end() walks through the new srcu_node hierarchy without ever reaching the old leaves so the callback is never executed. This is easily reproduced on an 8 CPUs machine with CONFIG_NR_CPUS >= 32 and "rcupdate.rcu_self_test=1". The srcu_barrier() after early tests verification never completes and the boot hangs: [ 5413.141029] INFO: task swapper/0:1 blocked for more than 4915 seconds. [ 5413.147564] Not tainted 5.12.0-rc4+ #28 [ 5413.151927] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 5413.159753] task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00004000 [ 5413.168099] Call Trace: [ 5413.170555] __schedule+0x36c/0x930 [ 5413.174057] ? wait_for_completion+0x88/0x110 [ 5413.178423] schedule+0x46/0xf0 [ 5413.181575] schedule_timeout+0x284/0x380 [ 5413.185591] ? wait_for_completion+0x88/0x110 [ 5413.189957] ? mark_held_locks+0x61/0x80 [ 5413.193882] ? mark_held_locks+0x61/0x80 [ 5413.197809] ? _raw_spin_unlock_irq+0x24/0x50 [ 5413.202173] ? wait_for_completion+0x88/0x110 [ 5413.206535] wait_for_completion+0xb4/0x110 [ 5413.210724] ? srcu_torture_stats_print+0x110/0x110 [ 5413.215610] srcu_barrier+0x187/0x200 [ 5413.219277] ? rcu_tasks_verify_self_tests+0x50/0x50 [ 5413.224244] ? rdinit_setup+0x2b/0x2b [ 5413.227907] rcu_verify_early_boot_tests+0x2d/0x40 [ 5413.232700] do_one_initcall+0x63/0x310 [ 5413.236541] ? rdinit_setup+0x2b/0x2b [ 5413.240207] ? rcu_read_lock_sched_held+0x52/0x80 [ 5413.244912] kernel_init_freeable+0x253/0x28f [ 5413.249273] ? rest_init+0x250/0x250 [ 5413.252846] kernel_init+0xa/0x110 [ 5413.256257] ret_from_fork+0x22/0x30 2) An srcu_struct structure that is initialized before rcu_init_geometry() and used afterward will always have stale rdp->mynode references, resulting in callbacks to be missed in srcu_gp_end(), just like in the previous scenario. This commit therefore causes init_srcu_struct_nodes to initialize the geometry, if needed. This ensures that the srcu_node hierarchy is properly built and distributed from the get-go. Suggested-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Neeraj Upadhyay <neeraju@codeaurora.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Uladzislau Rezki <urezki@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20dmaengine: fsl-qdma: check dma_set_mask return valueRobin Gong
[ Upstream commit f0c07993af0acf5545d5c1445798846565f4f147 ] For fix below warning reported by static code analysis tool like Coverity from Synopsys: Signed-off-by: Robin Gong <yibin.gong@nxp.com> Addresses-Coverity-ID: 12285639 ("Unchecked return value") Link: https://lore.kernel.org/r/1619427549-20498-1-git-send-email-yibin.gong@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20net: moxa: Use devm_platform_get_and_ioremap_resource()Yang Yingliang
commit 35cba15a504bf4f585bb9d78f47b22b28a1a06b2 upstream. Use devm_platform_get_and_ioremap_resource() to simplify code and avoid a null-ptr-deref by checking 'res' in it. [yyl: since devm_platform_get_and_ioremap_resource() is introduced in linux-5.7, so just check the return value after calling platform_get_resource()] Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20fbmem: Do not delete the mode that is still in useZhen Lei
commit 0af778269a522c988ef0b4188556aba97fb420cc upstream. The execution of fb_delete_videomode() is not based on the result of the previous fbcon_mode_deleted(). As a result, the mode is directly deleted, regardless of whether it is still in use, which may cause UAF. ================================================================== BUG: KASAN: use-after-free in fb_mode_is_equal+0x36e/0x5e0 \ drivers/video/fbdev/core/modedb.c:924 Read of size 4 at addr ffff88807e0ddb1c by task syz-executor.0/18962 CPU: 2 PID: 18962 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ... Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x137/0x1be lib/dump_stack.c:118 print_address_description+0x6c/0x640 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x13d/0x1e0 mm/kasan/report.c:562 fb_mode_is_equal+0x36e/0x5e0 drivers/video/fbdev/core/modedb.c:924 fbcon_mode_deleted+0x16a/0x220 drivers/video/fbdev/core/fbcon.c:2746 fb_set_var+0x1e1/0xdb0 drivers/video/fbdev/core/fbmem.c:975 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 18960: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x108/0x140 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1541 [inline] slab_free_freelist_hook+0xd6/0x1a0 mm/slub.c:1574 slab_free mm/slub.c:3139 [inline] kfree+0xca/0x3d0 mm/slub.c:4121 fb_delete_videomode+0x56a/0x820 drivers/video/fbdev/core/modedb.c:1104 fb_set_var+0x1f3/0xdb0 drivers/video/fbdev/core/fbmem.c:978 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 13ff178ccd6d ("fbcon: Call fbcon_mode_deleted/new_modelist directly") Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: <stable@vger.kernel.org> # v5.3+ Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210712085544.2828-1-thunder.leizhen@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20cgroup: verify that source is a stringChristian Brauner
commit 3b0462726e7ef281c35a7a4ae33e93ee2bc9975b upstream. The following sequence can be used to trigger a UAF: int fscontext_fd = fsopen("cgroup"); int fd_null = open("/dev/null, O_RDONLY); int fsconfig(fscontext_fd, FSCONFIG_SET_FD, "source", fd_null); close_range(3, ~0U, 0); The cgroup v1 specific fs parser expects a string for the "source" parameter. However, it is perfectly legitimate to e.g. specify a file descriptor for the "source" parameter. The fs parser doesn't know what a filesystem allows there. So it's a bug to assume that "source" is always of type fs_value_is_string when it can reasonably also be fs_value_is_file. This assumption in the cgroup code causes a UAF because struct fs_parameter uses a union for the actual value. Access to that union is guarded by the param->type member. Since the cgroup paramter parser didn't check param->type but unconditionally moved param->string into fc->source a close on the fscontext_fd would trigger a UAF during put_fs_context() which frees fc->source thereby freeing the file stashed in param->file causing a UAF during a close of the fd_null. Fix this by verifying that param->type is actually a string and report an error if not. In follow up patches I'll add a new generic helper that can be used here and by other filesystems instead of this error-prone copy-pasta fix. But fixing it in here first makes backporting a it to stable a lot easier. Fixes: 8d2451f4994f ("cgroup1: switch to option-by-option parsing") Reported-by: syzbot+283ce5a46486d6acdbaf@syzkaller.appspotmail.com Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@kernel.org> Cc: syzkaller-bugs <syzkaller-bugs@googlegroups.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20tracing: Do not reference char * as a string in histogramsSteven Rostedt (VMware)
commit 704adfb5a9978462cd861f170201ae2b5e3d3a80 upstream. The histogram logic was allowing events with char * pointers to be used as normal strings. But it was easy to crash the kernel with: # echo 'hist:keys=filename' > events/syscalls/sys_enter_openat/trigger And open some files, and boom! BUG: unable to handle page fault for address: 00007f2ced0c3280 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1173fa067 P4D 1173fa067 PUD 1171b6067 PMD 1171dd067 PTE 0 Oops: 0000 [#1] PREEMPT SMP CPU: 6 PID: 1810 Comm: cat Not tainted 5.13.0-rc5-test+ #61 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:strlen+0x0/0x20 Code: f6 82 80 2a 0b a9 20 74 11 0f b6 50 01 48 83 c0 01 f6 82 80 2a 0b a9 20 75 ef c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 <80> 3f 00 74 10 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 RSP: 0018:ffffbdbf81567b50 EFLAGS: 00010246 RAX: 0000000000000003 RBX: ffff93815cdb3800 RCX: ffff9382401a22d0 RDX: 0000000000000100 RSI: 0000000000000000 RDI: 00007f2ced0c3280 RBP: 0000000000000100 R08: ffff9382409ff074 R09: ffffbdbf81567c98 R10: ffff9382409ff074 R11: 0000000000000000 R12: ffff9382409ff074 R13: 0000000000000001 R14: ffff93815a744f00 R15: 00007f2ced0c3280 FS: 00007f2ced0f8580(0000) GS:ffff93825a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2ced0c3280 CR3: 0000000107069005 CR4: 00000000001706e0 Call Trace: event_hist_trigger+0x463/0x5f0 ? find_held_lock+0x32/0x90 ? sched_clock_cpu+0xe/0xd0 ? lock_release+0x155/0x440 ? kernel_init_free_pages+0x6d/0x90 ? preempt_count_sub+0x9b/0xd0 ? kernel_init_free_pages+0x6d/0x90 ? get_page_from_freelist+0x12c4/0x1680 ? __rb_reserve_next+0xe5/0x460 ? ring_buffer_lock_reserve+0x12a/0x3f0 event_triggers_call+0x52/0xe0 ftrace_syscall_enter+0x264/0x2c0 syscall_trace_enter.constprop.0+0x1ee/0x210 do_syscall_64+0x1c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Where it triggered a fault on strlen(key) where key was the filename. The reason is that filename is a char * to user space, and the histogram code just blindly dereferenced it, with obvious bad results. I originally tried to use strncpy_from_user/kernel_nofault() but found that there's other places that its dereferenced and not worth the effort. Just do not allow "char *" to act like strings. Link: https://lkml.kernel.org/r/20210715000206.025df9d2@rorschach.local.home Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com> Cc: stable@vger.kernel.org Acked-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Tom Zanussi <zanussi@kernel.org> Fixes: 79e577cbce4c4 ("tracing: Support string type key properly") Fixes: 5967bd5c4239 ("tracing: Let filter_assign_type() detect FILTER_PTR_STRING") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20scsi: core: Fix bad pointer dereference when ehandler kthread is invalidTyrel Datwyler
commit 93aa71ad7379900e61c8adff6a710a4c18c7c99b upstream. Commit 66a834d09293 ("scsi: core: Fix error handling of scsi_host_alloc()") changed the allocation logic to call put_device() to perform host cleanup with the assumption that IDA removal and stopping the kthread would properly be performed in scsi_host_dev_release(). However, in the unlikely case that the error handler thread fails to spawn, shost->ehandler is set to ERR_PTR(-ENOMEM). The error handler cleanup code in scsi_host_dev_release() will call kthread_stop() if shost->ehandler != NULL which will always be the case whether the kthread was successfully spawned or not. In the case that it failed to spawn this has the nasty side effect of trying to dereference an invalid pointer when kthread_stop() is called. The following splat provides an example of this behavior in the wild: scsi host11: error handler thread failed to spawn, error = -4 Kernel attempted to read user page (10c) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x0000010c Faulting instruction address: 0xc00000000818e9a8 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvscsi(+) scsi_transport_srp dm_multipath dm_mirror dm_region hash dm_log dm_mod fuse overlay squashfs loop CPU: 12 PID: 274 Comm: systemd-udevd Not tainted 5.13.0-rc7 #1 NIP: c00000000818e9a8 LR: c0000000089846e8 CTR: 0000000000007ee8 REGS: c000000037d12ea0 TRAP: 0300 Not tainted (5.13.0-rc7) MSR: 800000000280b033 &lt;SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE&gt; CR: 28228228 XER: 20040001 CFAR: c0000000089846e4 DAR: 000000000000010c DSISR: 40000000 IRQMASK: 0 GPR00: c0000000089846e8 c000000037d13140 c000000009cc1100 fffffffffffffffc GPR04: 0000000000000001 0000000000000000 0000000000000000 c000000037dc0000 GPR08: 0000000000000000 c000000037dc0000 0000000000000001 00000000fffff7ff GPR12: 0000000000008000 c00000000a049000 c000000037d13d00 000000011134d5a0 GPR16: 0000000000001740 c0080000190d0000 c0080000190d1740 c000000009129288 GPR20: c000000037d13bc0 0000000000000001 c000000037d13bc0 c0080000190b7898 GPR24: c0080000190b7708 0000000000000000 c000000033bb2c48 0000000000000000 GPR28: c000000046b28280 0000000000000000 000000000000010c fffffffffffffffc NIP [c00000000818e9a8] kthread_stop+0x38/0x230 LR [c0000000089846e8] scsi_host_dev_release+0x98/0x160 Call Trace: [c000000033bb2c48] 0xc000000033bb2c48 (unreliable) [c0000000089846e8] scsi_host_dev_release+0x98/0x160 [c00000000891e960] device_release+0x60/0x100 [c0000000087e55c4] kobject_release+0x84/0x210 [c00000000891ec78] put_device+0x28/0x40 [c000000008984ea4] scsi_host_alloc+0x314/0x430 [c0080000190b38bc] ibmvscsi_probe+0x54/0xad0 [ibmvscsi] [c000000008110104] vio_bus_probe+0xa4/0x4b0 [c00000000892a860] really_probe+0x140/0x680 [c00000000892aefc] driver_probe_device+0x15c/0x200 [c00000000892b63c] device_driver_attach+0xcc/0xe0 [c00000000892b740] __driver_attach+0xf0/0x200 [c000000008926f28] bus_for_each_dev+0xa8/0x130 [c000000008929ce4] driver_attach+0x34/0x50 [c000000008928fc0] bus_add_driver+0x1b0/0x300 [c00000000892c798] driver_register+0x98/0x1a0 [c00000000810eb60] __vio_register_driver+0x80/0xe0 [c0080000190b4a30] ibmvscsi_module_init+0x9c/0xdc [ibmvscsi] [c0000000080121d0] do_one_initcall+0x60/0x2d0 [c000000008261abc] do_init_module+0x7c/0x320 [c000000008265700] load_module+0x2350/0x25b0 [c000000008265cb4] __do_sys_finit_module+0xd4/0x160 [c000000008031110] system_call_exception+0x150/0x2d0 [c00000000800d35c] system_call_common+0xec/0x278 Fix this be nulling shost->ehandler when the kthread fails to spawn. Link: https://lore.kernel.org/r/20210701195659.3185475-1-tyreld@linux.ibm.com Fixes: 66a834d09293 ("scsi: core: Fix error handling of scsi_host_alloc()") Cc: stable@vger.kernel.org Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20KVM: X86: Disable hardware breakpoints unconditionally before kvm_x86->run()Lai Jiangshan
commit f85d40160691881a17a397c448d799dfc90987ba upstream. When the host is using debug registers but the guest is not using them nor is the guest in guest-debug state, the kvm code does not reset the host debug registers before kvm_x86->run(). Rather, it relies on the hardware vmentry instruction to automatically reset the dr7 registers which ensures that the host breakpoints do not affect the guest. This however violates the non-instrumentable nature around VM entry and exit; for example, when a host breakpoint is set on vcpu->arch.cr2, Another issue is consistency. When the guest debug registers are active, the host breakpoints are reset before kvm_x86->run(). But when the guest debug registers are inactive, the host breakpoints are delayed to be disabled. The host tracing tools may see different results depending on what the guest is doing. To fix the problems, we clear %db7 unconditionally before kvm_x86->run() if the host has set any breakpoints, no matter if the guest is using them or not. Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Message-Id: <20210628172632.81029-1-jiangshanlai@gmail.com> Cc: stable@vger.kernel.org [Only clear %db7 instead of reloading all debug registers. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20KVM: x86: Use guest MAXPHYADDR from CPUID.0x8000_0008 iff TDP is enabledSean Christopherson
commit 4bf48e3c0aafd32b960d341c4925b48f416f14a5 upstream. Ignore the guest MAXPHYADDR reported by CPUID.0x8000_0008 if TDP, i.e. NPT, is disabled, and instead use the host's MAXPHYADDR. Per AMD'S APM: Maximum guest physical address size in bits. This number applies only to guests using nested paging. When this field is zero, refer to the PhysAddrSize field for the maximum guest physical address size. Fixes: 24c82e576b78 ("KVM: Sanitize cpuid") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210623230552.4027702-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20KVM: mmio: Fix use-after-free Read in kvm_vm_ioctl_unregister_coalesced_mmioKefeng Wang
commit 23fa2e46a5556f787ce2ea1a315d3ab93cced204 upstream. BUG: KASAN: use-after-free in kvm_vm_ioctl_unregister_coalesced_mmio+0x7c/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:183 Read of size 8 at addr ffff0000c03a2500 by task syz-executor083/4269 CPU: 5 PID: 4269 Comm: syz-executor083 Not tainted 5.10.0 #7 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2d0 arch/arm64/kernel/stacktrace.c:132 show_stack+0x28/0x34 arch/arm64/kernel/stacktrace.c:196 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x110/0x164 lib/dump_stack.c:118 print_address_description+0x78/0x5c8 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x148/0x1e4 mm/kasan/report.c:562 check_memory_region_inline mm/kasan/generic.c:183 [inline] __asan_load8+0xb4/0xbc mm/kasan/generic.c:252 kvm_vm_ioctl_unregister_coalesced_mmio+0x7c/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:183 kvm_vm_ioctl+0xe30/0x14c4 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3755 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __arm64_sys_ioctl+0xf88/0x131c fs/ioctl.c:739 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall arch/arm64/kernel/syscall.c:48 [inline] el0_svc_common arch/arm64/kernel/syscall.c:158 [inline] do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:220 el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367 el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383 el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670 Allocated by task 4269: stack_trace_save+0x80/0xb8 kernel/stacktrace.c:121 kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc+0xdc/0x120 mm/kasan/common.c:461 kasan_kmalloc+0xc/0x14 mm/kasan/common.c:475 kmem_cache_alloc_trace include/linux/slab.h:450 [inline] kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:664 [inline] kvm_vm_ioctl_register_coalesced_mmio+0x78/0x1cc arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:146 kvm_vm_ioctl+0x7e8/0x14c4 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3746 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __arm64_sys_ioctl+0xf88/0x131c fs/ioctl.c:739 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall arch/arm64/kernel/syscall.c:48 [inline] el0_svc_common arch/arm64/kernel/syscall.c:158 [inline] do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:220 el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367 el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383 el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670 Freed by task 4269: stack_trace_save+0x80/0xb8 kernel/stacktrace.c:121 kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x38/0x6c mm/kasan/common.c:56 kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:355 __kasan_slab_free+0x124/0x150 mm/kasan/common.c:422 kasan_slab_free+0x10/0x1c mm/kasan/common.c:431 slab_free_hook mm/slub.c:1544 [inline] slab_free_freelist_hook mm/slub.c:1577 [inline] slab_free mm/slub.c:3142 [inline] kfree+0x104/0x38c mm/slub.c:4124 coalesced_mmio_destructor+0x94/0xa4 arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:102 kvm_iodevice_destructor include/kvm/iodev.h:61 [inline] kvm_io_bus_unregister_dev+0x248/0x280 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:4374 kvm_vm_ioctl_unregister_coalesced_mmio+0x158/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:186 kvm_vm_ioctl+0xe30/0x14c4 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3755 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __arm64_sys_ioctl+0xf88/0x131c fs/ioctl.c:739 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall arch/arm64/kernel/syscall.c:48 [inline] el0_svc_common arch/arm64/kernel/syscall.c:158 [inline] do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:220 el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367 el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383 el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670 If kvm_io_bus_unregister_dev() return -ENOMEM, we already call kvm_iodevice_destructor() inside this function to delete 'struct kvm_coalesced_mmio_dev *dev' from list and free the dev, but kvm_iodevice_destructor() is called again, it will lead the above issue. Let's check the the return value of kvm_io_bus_unregister_dev(), only call kvm_iodevice_destructor() if the return value is 0. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Message-Id: <20210626070304.143456-1-wangkefeng.wang@huawei.com> Cc: stable@vger.kernel.org Fixes: 5d3c4c79384a ("KVM: Stop looking for coalesced MMIO zones if the bus is destroyed", 2021-04-20) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19Linux 5.4.133Greg Kroah-Hartman
Link: https://lore.kernel.org/r/20210715182448.393443551@linuxfoundation.org Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Link: https://lore.kernel.org/r/20210716182029.878765454@linuxfoundation.org Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Hulk Robot <hulkrobot@huawei.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Hulk Robot <hulkrobot@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19smackfs: restrict bytes count in smk_set_cipso()Tetsuo Handa
commit 49ec114a6e62d8d320037ce71c1aaf9650b3cafd upstream. Oops, I failed to update subject line. From 07571157c91b98ce1a4aa70967531e64b78e8346 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Date: Mon, 12 Apr 2021 22:25:06 +0900 Subject: smackfs: restrict bytes count in smk_set_cipso() Commit 7ef4c19d245f3dc2 ("smackfs: restrict bytes count in smackfs write functions") missed that count > SMK_CIPSOMAX check applies to only format == SMK_FIXED24_FMT case. Reported-by: syzbot <syzbot+77c53db50c9fff774e8e@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19jfs: fix GPF in diFreePavel Skripkin
commit 9d574f985fe33efd6911f4d752de6f485a1ea732 upstream. Avoid passing inode with JFS_SBI(inode->i_sb)->ipimap == NULL to diFree()[1]. GFP will appear: struct inode *ipimap = JFS_SBI(ip->i_sb)->ipimap; struct inomap *imap = JFS_IP(ipimap)->i_imap; JFS_IP() will return invalid pointer when ipimap == NULL Call Trace: diFree+0x13d/0x2dc0 fs/jfs/jfs_imap.c:853 [1] jfs_evict_inode+0x2c9/0x370 fs/jfs/inode.c:154 evict+0x2ed/0x750 fs/inode.c:578 iput_final fs/inode.c:1654 [inline] iput.part.0+0x3fe/0x820 fs/inode.c:1680 iput+0x58/0x70 fs/inode.c:1670 Reported-and-tested-by: syzbot+0a89a7b56db04c21a656@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19pinctrl: mcp23s08: Fix missing unlock on error in mcp23s08_irq()Zou Wei
commit 884af72c90016cfccd5717439c86b48702cbf184 upstream. Add the missing unlock before return from function mcp23s08_irq() in the error handling case. v1-->v2: remove the "return IRQ_HANDLED" line Fixes: 897120d41e7a ("pinctrl: mcp23s08: fix race condition in irq handler") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1623134048-56051-1-git-send-email-zou_wei@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19media: uvcvideo: Fix pixel format change for Elgato Cam Link 4KBenjamin Drung
commit 4c6e0976295add7f0ed94d276c04a3d6f1ea8f83 upstream. The Elgato Cam Link 4K HDMI video capture card reports to support three different pixel formats, where the first format depends on the connected HDMI device. ``` $ v4l2-ctl -d /dev/video0 --list-formats-ext ioctl: VIDIOC_ENUM_FMT Type: Video Capture [0]: 'NV12' (Y/CbCr 4:2:0) Size: Discrete 3840x2160 Interval: Discrete 0.033s (29.970 fps) [1]: 'NV12' (Y/CbCr 4:2:0) Size: Discrete 3840x2160 Interval: Discrete 0.033s (29.970 fps) [2]: 'YU12' (Planar YUV 4:2:0) Size: Discrete 3840x2160 Interval: Discrete 0.033s (29.970 fps) ``` Changing the pixel format to anything besides the first pixel format does not work: ``` $ v4l2-ctl -d /dev/video0 --try-fmt-video pixelformat=YU12 Format Video Capture: Width/Height : 3840/2160 Pixel Format : 'NV12' (Y/CbCr 4:2:0) Field : None Bytes per Line : 3840 Size Image : 12441600 Colorspace : sRGB Transfer Function : Rec. 709 YCbCr/HSV Encoding: Rec. 709 Quantization : Default (maps to Limited Range) Flags : ``` User space applications like VLC might show an error message on the terminal in that case: ``` libv4l2: error set_fmt gave us a different result than try_fmt! ``` Depending on the error handling of the user space applications, they might display a distorted video, because they use the wrong pixel format for decoding the stream. The Elgato Cam Link 4K responds to the USB video probe VS_PROBE_CONTROL/VS_COMMIT_CONTROL with a malformed data structure: The second byte contains bFormatIndex (instead of being the second byte of bmHint). The first byte is always zero. The third byte is always 1. The firmware bug was reported to Elgato on 2020-12-01 and it was forwarded by the support team to the developers as feature request. There is no firmware update available since then. The latest firmware for Elgato Cam Link 4K as of 2021-03-23 has MCU 20.02.19 and FPGA 67. Therefore correct the malformed data structure for this device. The change was successfully tested with VLC, OBS, and Chromium using different pixel formats (YUYV, NV12, YU12), resolutions (3840x2160, 1920x1080), and frame rates (29.970 and 59.940 fps). Cc: stable@vger.kernel.org Signed-off-by: Benjamin Drung <bdrung@posteo.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19media: gspca/sunplus: fix zero-length control requestsJohan Hovold
commit b4bb4d425b7b02424afea2dfdcd77b3b4794175e upstream. The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Control transfers without a data stage are treated as OUT requests by the USB stack and should be using usb_sndctrlpipe(). Failing to do so will now trigger a warning. Fix the single zero-length control request which was using the read-register helper, and update the helper so that zero-length reads fail with an error message instead. Fixes: 6a7eba24e4f0 ("V4L/DVB (8157): gspca: all subdrivers") Cc: stable@vger.kernel.org # 2.6.27 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19media: gspca/sq905: fix control-request directionJohan Hovold
commit 53ae298fde7adcc4b1432bce2dbdf8dac54dfa72 upstream. The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the USB_REQ_SYNCH_FRAME request which erroneously used usb_sndctrlpipe(). Fixes: 27d35fc3fb06 ("V4L/DVB (10639): gspca - sq905: New subdriver.") Cc: stable@vger.kernel.org # 2.6.30 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19media: zr364xx: fix memory leak in zr364xx_start_readpipePavel Skripkin
commit 0a045eac8d0427b64577a24d74bb8347c905ac65 upstream. syzbot reported memory leak in zr364xx driver. The problem was in non-freed urb in case of usb_submit_urb() fail. backtrace: [<ffffffff82baedf6>] kmalloc include/linux/slab.h:561 [inline] [<ffffffff82baedf6>] usb_alloc_urb+0x66/0xe0 drivers/usb/core/urb.c:74 [<ffffffff82f7cce8>] zr364xx_start_readpipe+0x78/0x130 drivers/media/usb/zr364xx/zr364xx.c:1022 [<ffffffff84251dfc>] zr364xx_board_init drivers/media/usb/zr364xx/zr364xx.c:1383 [inline] [<ffffffff84251dfc>] zr364xx_probe+0x6a3/0x851 drivers/media/usb/zr364xx/zr364xx.c:1516 [<ffffffff82bb6507>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff826018a9>] really_probe+0x159/0x500 drivers/base/dd.c:576 Fixes: ccbf035ae5de ("V4L/DVB (12278): zr364xx: implement V4L2_CAP_STREAMING") Cc: stable@vger.kernel.org Reported-by: syzbot+af4fa391ef18efdd5f69@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19media: dtv5100: fix control-request directionsJohan Hovold
commit 8c8b9a9be2afa8bd6a72ad1130532baab9fab89d upstream. The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the control requests which erroneously used usb_rcvctrlpipe(). Fixes: 8466028be792 ("V4L/DVB (8734): Initial support for AME DTV-5100 USB2.0 DVB-T") Cc: stable@vger.kernel.org # 2.6.28 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19media: subdev: disallow ioctl for saa6588/davinciArnd Bergmann
commit 0a7790be182d32b9b332a37cb4206e24fe94b728 upstream. The saa6588_ioctl() function expects to get called from other kernel functions with a 'saa6588_command' pointer, but I found nothing stops it from getting called from user space instead, which seems rather dangerous. The same thing happens in the davinci vpbe driver with its VENC_GET_FLD command. As a quick fix, add a separate .command() callback pointer for this driver and change the two callers over to that. This change can easily get backported to stable kernels if necessary, but since there are only two drivers, we may want to eventually replace this with a set of more specialized callbacks in the long run. Fixes: c3fda7f835b0 ("V4L/DVB (10537): saa6588: convert to v4l2_subdev.") Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19PCI: aardvark: Implement workaround for the readback value of VEND_IDPali Rohár
commit 7f71a409fe3d9358da07c77f15bb5b7960f12253 upstream. Marvell Armada 3700 Functional Errata, Guidelines, and Restrictions document describes in erratum 4.1 PCIe value of vendor ID (Ref #: 243): The readback value of VEND_ID (RD0070000h [15:0]) is 1B4Bh, while it should read 11ABh. The firmware can write the correct value, 11ABh, through VEND_ID (RD0076044h [15:0]). Implement this workaround in aardvark driver for both PCI vendor id and PCI subsystem vendor id. This change affects and fixes PCI vendor id of emulated PCIe root bridge. After this change emulated PCIe root bridge has correct vendor id. Link: https://lore.kernel.org/r/20210624222621.4776-5-pali@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19PCI: aardvark: Fix checking for PIO Non-posted RequestPali Rohár
commit 8ceeac307a79f68c0d0c72d6e48b82fa424204ec upstream. PIO_NON_POSTED_REQ for PIO_STAT register is incorrectly defined. Bit 10 in register PIO_STAT indicates the response is to a non-posted request. Link: https://lore.kernel.org/r/20210624213345.3617-2-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19PCI: Leave Apple Thunderbolt controllers on for s2idle or standbyKonstantin Kharlamov
commit 4694ae373dc2114f9a82f6ae15737e65af0c6dea upstream. On Macbook 2013, resuming from suspend-to-idle or standby resulted in the external monitor no longer being detected, a stacktrace, and errors like this in dmesg: pcieport 0000:06:00.0: can't change power state from D3hot to D0 (config space inaccessible) The reason is that we know how to turn power to the Thunderbolt controller *off* via the SXIO/SXFP/SXLF methods, but we don't know how to turn power back on. We have to rely on firmware to turn the power back on. When going to the "suspend-to-idle" or "standby" system sleep states, firmware is not involved either on the suspend side or the resume side, so we can't use SXIO/SXFP/SXLF to turn the power off. Skip SXIO/SXFP/SXLF when firmware isn't involved in suspend, e.g., when we're going to the "suspend-to-idle" or "standby" system sleep states. Fixes: 1df5172c5c25 ("PCI: Suspend/resume quirks for Apple thunderbolt") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212767 Link: https://lore.kernel.org/r/20210520235501.917397-1-Hi-Angel@yandex.ru Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19dm btree remove: assign new_root only when removal succeedsHou Tao
commit b6e58b5466b2959f83034bead2e2e1395cca8aeb upstream. remove_raw() in dm_btree_remove() may fail due to IO read error (e.g. read the content of origin block fails during shadowing), and the value of shadow_spine::root is uninitialized, but the uninitialized value is still assign to new_root in the end of dm_btree_remove(). For dm-thin, the value of pmd->details_root or pmd->root will become an uninitialized value, so if trying to read details_info tree again out-of-bound memory may occur as showed below: general protection fault, probably for non-canonical address 0x3fdcb14c8d7520 CPU: 4 PID: 515 Comm: dmsetup Not tainted 5.13.0-rc6 Hardware name: QEMU Standard PC RIP: 0010:metadata_ll_load_ie+0x14/0x30 Call Trace: sm_metadata_count_is_more_than_one+0xb9/0xe0 dm_tm_shadow_block+0x52/0x1c0 shadow_step+0x59/0xf0 remove_raw+0xb2/0x170 dm_btree_remove+0xf4/0x1c0 dm_pool_delete_thin_device+0xc3/0x140 pool_message+0x218/0x2b0 target_message+0x251/0x290 ctl_ioctl+0x1c4/0x4d0 dm_ctl_ioctl+0xe/0x20 __x64_sys_ioctl+0x7b/0xb0 do_syscall_64+0x40/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixing it by only assign new_root when removal succeeds Signed-off-by: Hou Tao <houtao1@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19coresight: tmc-etf: Fix global-out-of-bounds in tmc_update_etf_buffer()Sai Prakash Ranjan
commit 5fae8a946ac2df879caf3f79a193d4766d00239b upstream. commit 6f755e85c332 ("coresight: Add helper for inserting synchronization packets") removed trailing '\0' from barrier_pkt array and updated the call sites like etb_update_buffer() to have proper checks for barrier_pkt size before read but missed updating tmc_update_etf_buffer() which still reads barrier_pkt past the array size resulting in KASAN out-of-bounds bug. Fix this by adding a check for barrier_pkt size before accessing like it is done in etb_update_buffer(). BUG: KASAN: global-out-of-bounds in tmc_update_etf_buffer+0x4b8/0x698 Read of size 4 at addr ffffffd05b7d1030 by task perf/2629 Call trace: dump_backtrace+0x0/0x27c show_stack+0x20/0x2c dump_stack+0x11c/0x188 print_address_description+0x3c/0x4a4 __kasan_report+0x140/0x164 kasan_report+0x10/0x18 __asan_report_load4_noabort+0x1c/0x24 tmc_update_etf_buffer+0x4b8/0x698 etm_event_stop+0x248/0x2d8 etm_event_del+0x20/0x2c event_sched_out+0x214/0x6f0 group_sched_out+0xd0/0x270 ctx_sched_out+0x2ec/0x518 __perf_event_task_sched_out+0x4fc/0xe6c __schedule+0x1094/0x16a0 preempt_schedule_irq+0x88/0x170 arm64_preempt_schedule_irq+0xf0/0x18c el1_irq+0xe8/0x180 perf_event_exec+0x4d8/0x56c setup_new_exec+0x204/0x400 load_elf_binary+0x72c/0x18c0 search_binary_handler+0x13c/0x420 load_script+0x500/0x6c4 search_binary_handler+0x13c/0x420 exec_binprm+0x118/0x654 __do_execve_file+0x77c/0xba4 __arm64_compat_sys_execve+0x98/0xac el0_svc_common+0x1f8/0x5e0 el0_svc_compat_handler+0x84/0xb0 el0_svc_compat+0x10/0x50 The buggy address belongs to the variable: barrier_pkt+0x10/0x40 Memory state around the buggy address: ffffffd05b7d0f00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00 ffffffd05b7d0f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffd05b7d1000: 00 00 00 00 00 00 fa fa fa fa fa fa 00 00 00 03 ^ ffffffd05b7d1080: fa fa fa fa 00 02 fa fa fa fa fa fa 03 fa fa fa ffffffd05b7d1100: fa fa fa fa 00 00 00 00 05 fa fa fa fa fa fa fa ================================================================== Link: https://lore.kernel.org/r/20210505093430.18445-1-saiprakash.ranjan@codeaurora.org Fixes: 0c3fc4d5fa26 ("coresight: Add barrier packet for synchronisation") Cc: stable@vger.kernel.org Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20210614175901.532683-6-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-30 21:15:01 +0000