summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-06mm/vmscan.c: set correct defer count for shrinkerShaohua Li
commit 5f33a0803bbd781de916f5c7448cbbbbc763d911 upstream. Our system uses significantly more slab memory with memcg enabled with the latest kernel. With 3.10 kernel, slab uses 2G memory, while with 4.6 kernel, 6G memory is used. The shrinker has problem. Let's see we have two memcg for one shrinker. In do_shrink_slab: 1. Check cg1. nr_deferred = 0, assume total_scan = 700. batch size is 1024, then no memory is freed. nr_deferred = 700 2. Check cg2. nr_deferred = 700. Assume freeable = 20, then total_scan = 10 or 40. Let's assume it's 10. No memory is freed. nr_deferred = 10. The deferred share of cg1 is lost in this case. kswapd will free no memory even run above steps again and again. The fix makes sure one memcg's deferred share isn't lost. Link: http://lkml.kernel.org/r/2414be961b5d25892060315fbb56bb19d81d0c07.1476227351.git.shli@fb.com Signed-off-by: Shaohua Li <shli@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06loop: return proper error from loop_queue_rq()Omar Sandoval
commit b4a567e8114327518c09f5632339a5954ab975a3 upstream. ->queue_rq() should return one of the BLK_MQ_RQ_QUEUE_* constants, not an errno. Fixes: f4aa4c7bbac6 ("block: loop: convert to per-device workqueue") Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06f2fs: set ->owner for debugfs status file's file_operationsNicolai Stange
commit 05e6ea2685c964db1e675a24a4f4e2adc22d2388 upstream. The struct file_operations instance serving the f2fs/status debugfs file lacks an initialization of its ->owner. This means that although that file might have been opened, the f2fs module can still get removed. Any further operation on that opened file, releasing included, will cause accesses to unmapped memory. Indeed, Mike Marshall reported the following: BUG: unable to handle kernel paging request at ffffffffa0307430 IP: [<ffffffff8132a224>] full_proxy_release+0x24/0x90 <...> Call Trace: [] __fput+0xdf/0x1d0 [] ____fput+0xe/0x10 [] task_work_run+0x8e/0xc0 [] do_exit+0x2ae/0xae0 [] ? __audit_syscall_entry+0xae/0x100 [] ? syscall_trace_enter+0x1ca/0x310 [] do_group_exit+0x44/0xc0 [] SyS_exit_group+0x14/0x20 [] do_syscall_64+0x61/0x150 [] entry_SYSCALL64_slow_path+0x25/0x25 <...> ---[ end trace f22ae883fa3ea6b8 ]--- Fixing recursive fault but reboot is needed! Fix this by initializing the f2fs/status file_operations' ->owner with THIS_MODULE. This will allow debugfs to grab a reference to the f2fs module upon any open on that file, thus preventing it from getting removed. Fixes: 902829aa0b72 ("f2fs: move proc files to debugfs") Reported-by: Mike Marshall <hubcap@omnibond.com> Reported-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ext4: do not perform data journaling when data is encryptedSergey Karamov
commit 73b92a2a5e97d17cc4d5c4fe9d724d3273fb6fd2 upstream. Currently data journalling is incompatible with encryption: enabling both at the same time has never been supported by design, and would result in unpredictable behavior. However, users are not precluded from turning on both features simultaneously. This change programmatically replaces data journaling for encrypted regular files with ordered data journaling mode. Background: Journaling encrypted data has not been supported because it operates on buffer heads of the page in the page cache. Namely, when the commit happens, which could be up to five seconds after caching, the commit thread uses the buffer heads attached to the page to copy the contents of the page to the journal. With encryption, it would have been required to keep the bounce buffer with ciphertext for up to the aforementioned five seconds, since the page cache can only hold plaintext and could not be used for journaling. Alternatively, it would be required to setup the journal to initiate a callback at the commit time to perform deferred encryption - in this case, not only would the data have to be written twice, but it would also have to be encrypted twice. This level of complexity was not justified for a mode that in practice is very rarely used because of the overhead from the data journalling. Solution: If data=journaled has been set as a mount option for a filesystem, or if journaling is enabled on a regular file, do not perform journaling if the file is also encrypted, instead fall back to the data=ordered mode for the file. Rationale: The intent is to allow seamless and proper filesystem operation when journaling and encryption have both been enabled, and have these two conflicting features gracefully resolved by the filesystem. Fixes: 4461471107b7 Signed-off-by: Sergey Karamov <skaramov@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ext4: return -ENOMEM instead of successDan Carpenter
commit 578620f451f836389424833f1454eeeb2ffc9e9f upstream. We should set the error code if kzalloc() fails. Fixes: 67cf5b09a46f ("ext4: add the basic function for inline data support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ext4: reject inodes with negative sizeDarrick J. Wong
commit 7e6e1ef48fc02f3ac5d0edecbb0c6087cd758d58 upstream. Don't load an inode with a negative size; this causes integer overflow problems in the VFS. [ Added EXT4_ERROR_INODE() to mark file system as corrupted. -TYT] Fixes: a48380f769df (ext4: rename i_dir_acl to i_size_high) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ext4: add sanity checking to count_overhead()Theodore Ts'o
commit c48ae41bafe31e9a66d8be2ced4e42a6b57fa814 upstream. The commit "ext4: sanity check the block and cluster size at mount time" should prevent any problems, but in case the superblock is modified while the file system is mounted, add an extra safety check to make sure we won't overrun the allocated buffer. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ext4: fix in-superblock mount options processingTheodore Ts'o
commit 5aee0f8a3f42c94c5012f1673420aee96315925a upstream. Fix a large number of problems with how we handle mount options in the superblock. For one, if the string in the superblock is long enough that it is not null terminated, we could run off the end of the string and try to interpret superblocks fields as characters. It's unlikely this will cause a security problem, but it could result in an invalid parse. Also, parse_options is destructive to the string, so in some cases if there is a comma-separated string, it would be modified in the superblock. (Fortunately it only happens on file systems with a 1k block size.) Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ext4: use more strict checks for inodes_per_block on mountTheodore Ts'o
commit cd6bb35bf7f6d7d922509bf50265383a0ceabe96 upstream. Centralize the checks for inodes_per_block and be more strict to make sure the inodes_per_block_group can't end up being zero. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ext4: fix stack memory corruption with 64k block sizeChandan Rajendra
commit 30a9d7afe70ed6bd9191d3000e2ef1a34fb58493 upstream. The number of 'counters' elements needed in 'struct sg' is super_block->s_blocksize_bits + 2. Presently we have 16 'counters' elements in the array. This is insufficient for block sizes >= 32k. In such cases the memcpy operation performed in ext4_mb_seq_groups_show() would cause stack memory corruption. Fixes: c9de560ded61f Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ext4: fix mballoc breakage with 64k block sizeChandan Rajendra
commit 69e43e8cc971a79dd1ee5d4343d8e63f82725123 upstream. 'border' variable is set to a value of 2 times the block size of the underlying filesystem. With 64k block size, the resulting value won't fit into a 16-bit variable. Hence this commit changes the data type of 'border' to 'unsigned int'. Fixes: c9de560ded61f Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06crypto: caam - fix AEAD givenc descriptorsAlex Porosanu
commit d128af17876d79b87edf048303f98b35f6a53dbc upstream. The AEAD givenc descriptor relies on moving the IV through the output FIFO and then back to the CTX2 for authentication. The SEQ FIFO STORE could be scheduled before the data can be read from OFIFO, especially since the SEQ FIFO LOAD needs to wait for the SEQ FIFO LOAD SKIP to finish first. The SKIP takes more time when the input is SG than when it's a contiguous buffer. If the SEQ FIFO LOAD is not scheduled before the STORE, the DECO will hang waiting for data to be available in the OFIFO so it can be transferred to C2. In order to overcome this, first force transfer of IV to C2 by starting the "cryptlen" transfer first and then starting to store data from OFIFO to the output buffer. Fixes: 1acebad3d8db8 ("crypto: caam - faster aead implementation") Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ptrace: Capture the ptracer's creds not PT_PTRACE_CAPEric W. Biederman
commit 64b875f7ac8a5d60a4e191479299e931ee949b67 upstream. When the flag PT_PTRACE_CAP was added the PTRACE_TRACEME path was overlooked. This can result in incorrect behavior when an application like strace traces an exec of a setuid executable. Further PT_PTRACE_CAP does not have enough information for making good security decisions as it does not report which user namespace the capability is in. This has already allowed one mistake through insufficient granulariy. I found this issue when I was testing another corner case of exec and discovered that I could not get strace to set PT_PTRACE_CAP even when running strace as root with a full set of caps. This change fixes the above issue with strace allowing stracing as root a setuid executable without disabling setuid. More fundamentaly this change allows what is allowable at all times, by using the correct information in it's decision. Fixes: 4214e42f96d4 ("v2.4.9.11 -> v2.4.9.12") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06mm: Add a user_ns owner to mm_struct and fix ptrace permission checksEric W. Biederman
commit bfedb589252c01fa505ac9f6f2a3d5d68d707ef4 upstream. During exec dumpable is cleared if the file that is being executed is not readable by the user executing the file. A bug in ptrace_may_access allows reading the file if the executable happens to enter into a subordinate user namespace (aka clone(CLONE_NEWUSER), unshare(CLONE_NEWUSER), or setns(fd, CLONE_NEWUSER). This problem is fixed with only necessary userspace breakage by adding a user namespace owner to mm_struct, captured at the time of exec, so it is clear in which user namespace CAP_SYS_PTRACE must be present in to be able to safely give read permission to the executable. The function ptrace_may_access is modified to verify that the ptracer has CAP_SYS_ADMIN in task->mm->user_ns instead of task->cred->user_ns. This ensures that if the task changes it's cred into a subordinate user namespace it does not become ptraceable. The function ptrace_attach is modified to only set PT_PTRACE_CAP when CAP_SYS_PTRACE is held over task->mm->user_ns. The intent of PT_PTRACE_CAP is to be a flag to note that whatever permission changes the task might go through the tracer has sufficient permissions for it not to be an issue. task->cred->user_ns is always the same as or descendent of mm->user_ns. Which guarantees that having CAP_SYS_PTRACE over mm->user_ns is the worst case for the tasks credentials. To prevent regressions mm->dumpable and mm->user_ns are not considered when a task has no mm. As simply failing ptrace_may_attach causes regressions in privileged applications attempting to read things such as /proc/<pid>/stat Acked-by: Kees Cook <keescook@chromium.org> Tested-by: Cyrill Gorcunov <gorcunov@openvz.org> Fixes: 8409cca70561 ("userns: allow ptrace from non-init user namespaces") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06block_dev: don't test bdev->bd_contains when it is not stableNeilBrown
commit bcc7f5b4bee8e327689a4d994022765855c807ff upstream. bdev->bd_contains is not stable before calling __blkdev_get(). When __blkdev_get() is called on a parition with ->bd_openers == 0 it sets bdev->bd_contains = bdev; which is not correct for a partition. After a call to __blkdev_get() succeeds, ->bd_openers will be > 0 and then ->bd_contains is stable. When FMODE_EXCL is used, blkdev_get() calls bd_start_claiming() -> bd_prepare_to_claim() -> bd_may_claim() This call happens before __blkdev_get() is called, so ->bd_contains is not stable. So bd_may_claim() cannot safely use ->bd_contains. It currently tries to use it, and this can lead to a BUG_ON(). This happens when a whole device is already open with a bd_holder (in use by dm in my particular example) and two threads race to open a partition of that device for the first time, one opening with O_EXCL and one without. The thread that doesn't use O_EXCL gets through blkdev_get() to __blkdev_get(), gains the ->bd_mutex, and sets bdev->bd_contains = bdev; Immediately thereafter the other thread, using FMODE_EXCL, calls bd_start_claiming() from blkdev_get(). This should fail because the whole device has a holder, but because bdev->bd_contains == bdev bd_may_claim() incorrectly reports success. This thread continues and blocks on bd_mutex. The first thread then sets bdev->bd_contains correctly and drops the mutex. The thread using FMODE_EXCL then continues and when it calls bd_may_claim() again in: BUG_ON(!bd_may_claim(bdev, whole, holder)); The BUG_ON fires. Fix this by removing the dependency on ->bd_contains in bd_may_claim(). As bd_may_claim() has direct access to the whole device, it can simply test if the target bdev is the whole device. Fixes: 6b4517a7913a ("block: implement bd_claiming and claiming block") Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06btrfs: make file clone aware of fatal signalsWang Xiaoguang
commit 69ae5e4459e43e56f03d0987e865fbac2b05af2a upstream. Indeed this just make the behavior similar to xfs when process has fatal signals pending, and it'll make fstests/generic/298 happy. Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06Btrfs: don't BUG() during drop snapshotJosef Bacik
commit 4867268c57ff709a7b6b86ae6f6537d846d1443a upstream. Really there's lots of things that can go wrong here, kill all the BUG_ON()'s and replace the logic ones with ASSERT()'s and return EIO instead. Signed-off-by: Josef Bacik <jbacik@fb.com> [ switched to btrfs_err, errors go to common label ] Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06Btrfs: fix memory leak in do_walk_downLiu Bo
commit a958eab0ed7fdc1b977bc25d3af6efedaa945488 upstream. The extent buffer 'next' needs to be free'd conditionally. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06Btrfs: don't leak reloc root nodes on errorJosef Bacik
commit 6bdf131fac2336adb1a628f992ba32384f653a55 upstream. We don't track the reloc roots in any sort of normal way, so the only way the root/commit_root nodes get free'd is if the relocation finishes successfully and the reloc root is deleted. Fix this by free'ing them in free_reloc_roots. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06Btrfs: return gracefully from balance if fs tree is corruptedLiu Bo
commit 3561b9db70928f207be4570b48fc19898eeaef54 upstream. When relocating tree blocks, we firstly get block information from back references in the extent tree, we then search fs tree to try to find all parents of a block. However, if fs tree is corrupted, eg. if there're some missing items, we could come across these WARN_ONs and BUG_ONs. This makes us print some error messages and return gracefully from balance. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06Btrfs: bail out if block group has different mixed flagLiu Bo
commit 49303381f19ab16a371a061b67e783d3f570d56e upstream. Currently we allow inconsistence about mixed flag (BTRFS_BLOCK_GROUP_METADATA | BTRFS_BLOCK_GROUP_DATA). We'd get ENOSPC if block group has mixed flag and btrfs doesn't. If that happens, we have one space_info with mixed flag and another space_info only with BTRFS_BLOCK_GROUP_METADATA, and global_block_rsv.space_info points to the latter one, but all bytes from block_group contributes to the mixed space_info, thus all the allocation will fail with ENOSPC. This adds a check for the above case. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> [ updated message ] Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06Btrfs: fix memory leak in reading btree blocksLiu Bo
commit 2571e739677f1e4c0c63f5ed49adcc0857923625 upstream. So we can read a btree block via readahead or intentional read, and we can end up with a memory leak when something happens as follows, 1) readahead starts to read block A but does not wait for read completion, 2) btree_readpage_end_io_hook finds that block A is corrupted, and it needs to clear all block A's pages' uptodate bit. 3) meanwhile an intentional read kicks in and checks block A's pages' uptodate to decide which page needs to be read. 4) when some pages have the uptodate bit during 3)'s check so 3) doesn't count them for eb->io_pages, but they are later cleared by 2) so we has to readpage on the page, we get the wrong eb->io_pages which results in a memory leak of this block. This fixes the problem by firstly getting all pages's locking and then checking pages' uptodate bit. t1(readahead) t2(readahead endio) t3(the following read) read_extent_buffer_pages end_bio_extent_readpage for pg in eb: for page 0,1,2 in eb: if pg is uptodate: btree_readpage_end_io_hook(pg) num_reads++ if uptodate: eb->io_pages = num_reads SetPageUptodate(pg) _______________ for pg in eb: for page 3 in eb: read_extent_buffer_pages if pg is NOT uptodate: btree_readpage_end_io_hook(pg) for pg in eb: __extent_read_full_page(pg) sanity check reports something wrong if pg is uptodate: clear_extent_buffer_uptodate(eb) num_reads++ for pg in eb: eb->io_pages = num_reads ClearPageUptodate(page) _______________ for pg in eb: if pg is NOT uptodate: __extent_read_full_page(pg) So t3's eb->io_pages is not consistent with the number of pages it's reading, and during endio(), atomic_dec_and_test(&eb->io_pages) will get a negative number so that we're not able to free the eb. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06clk: ti: omap36xx: Work around sprz319 advisory 2.1Richard Watts
commit 035cd485a47dda64f25ccf8a90b11a07d0b7aa7a upstream. The OMAP36xx DPLL5, driving EHCI USB, can be subject to a long-term frequency drift. The frequency drift magnitude depends on the VCO update rate, which is inversely proportional to the PLL divider. The kernel DPLL configuration code results in a high value for the divider, leading to a long term drift high enough to cause USB transmission errors. In the worst case the USB PHY's ULPI interface can stop responding, breaking USB operation completely. This manifests itself on the Beagleboard xM by the LAN9514 reporting 'Cannot enable port 2. Maybe the cable is bad?' in the kernel log. Errata sprz319 advisory 2.1 documents PLL values that minimize the drift. Use them automatically when DPLL5 is used for USB operation, which we detect based on the requested clock rate. The clock framework will still compute the PLL parameters and resulting rate as usual, but the PLL M and N values will then be overridden. This can result in the effective clock rate being slightly different than the rate cached by the clock framework, but won't cause any adverse effect to USB operation. Signed-off-by: Richard Watts <rrw@kynesim.co.uk> [Upported from v3.2 to v4.9] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Adam Ford <aford173@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ALSA: hda: when comparing pin configurations, ignore assoc in addition to seqKai-Heng Feng
commit 5e0ad0d8747f3e4803a9c3d96d64dd7332506d3c upstream. Commit [64047d7f4912 ALSA: hda - ignore the assoc and seq when comparing pin configurations] intented to ignore both seq and assoc at pin comparing, but it only ignored seq. So that commit may still fail to match pins on some machines. Change the bitmask to also ignore assoc. v2: Use macro to do bit masking. Thanks to Hui Wang for the analysis. Fixes: 64047d7f4912 ("ALSA: hda - ignore the assoc and seq when comparing...") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ALSA: hda - Gate the mic jack on HP Z1 Gen3 AiOTakashi Iwai
commit f73cd43ac3b41c0f09a126387f302bbc0d9c726d upstream. HP Z1 Gen3 AiO with Conexant codec doesn't give an unsolicited event to the headset mic pin upon the jack plugging, it reports only to the headphone pin. It results in the missing mic switching. Let's fix up by simply gating the jack event. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ALSA: hda - fix headset-mic problem on a Dell laptopHui Wang
commit 989dbe4a30728c047316ab87e5fa8b609951ce7c upstream. This group of new pins is not in the pin quirk table yet, adding them to the pin quirk table to fix the headset-mic problem. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ALSA: hda - ignore the assoc and seq when comparing pin configurationsHui Wang
commit 64047d7f4912de1769d1bf0d34c6322494b13779 upstream. More and more pin configurations have been adding to the pin quirk table, lots of them are only different from assoc and seq, but they all apply to the same QUIRK_FIXUP, if we don't compare assoc and seq when matching pin configurations, it will greatly reduce the pin quirk table size. We have tested this change on a couple of Dell laptops, it worked well. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ALSA: hda/ca0132 - Add quirk for Alienware 15 R2 2016Sven Hahne
commit b5337cfe067e96b8a98699da90c7dcd2bec21133 upstream. I'm using an Alienware 15 R2 and had to use the alienware quirks to get my headphone output working. I fixed it by adding, SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2 2016", QUIRK_ALIENWARE) to the patch. Signed-off-by: Sven Hahne <hahne@zeitkunst.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ALSA: hiface: Fix M2Tech hiFace driver sampling rate changeJussi Laako
commit 995c6a7fd9b9212abdf01160f6ce3193176be503 upstream. Sampling rate changes after first set one are not reflected to the hardware, while driver and ALSA think the rate has been changed. Fix the problem by properly stopping the interface at the beginning of prepare call, allowing new rate to be set to the hardware. This keeps the hardware in sync with the driver. Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirksCon Kolivas
commit 82ffb6fc637150b279f49e174166d2aa3853eaf4 upstream. The Logitech QuickCam Communicate Deluxe/S7500 microphone fails with the following warning. [ 6.778995] usb 2-1.2.2.2: Warning! Unlikely big volume range (=3072), cval->res is probably wrong. [ 6.778996] usb 2-1.2.2.2: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1 Adding it to the list of devices in volume_control_quirks makes it work properly, fixing related typo. Signed-off-by: Con Kolivas <kernel@kolivas.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06USB: UHCI: report non-PME wakeup signalling for Intel hardwareAlan Stern
commit ccdb6be9ec6580ef69f68949ebe26e0fb58a6fb0 upstream. The UHCI controllers in Intel chipsets rely on a platform-specific non-PME mechanism for wakeup signalling. They can generate wakeup signals even though they don't support PME. We need to let the USB core know this so that it will enable runtime suspend for UHCI controllers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06usb: gadget: composite: correctly initialize ep->maxpacketFelipe Balbi
commit e8f29bb719b47a234f33b0af62974d7a9521a52c upstream. usb_endpoint_maxp() returns wMaxPacketSize in its raw form. Without taking into consideration that it also contains other bits reserved for isochronous endpoints. This patch fixes one occasion where this is a problem by making sure that we initialize ep->maxpacket only with lower 10 bits of the value returned by usb_endpoint_maxp(). Note that seperate patches will be necessary to audit all call sites of usb_endpoint_maxp() and make sure that usb_endpoint_maxp() only returns lower 10 bits of wMaxPacketSize. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06usb: gadget: f_uac2: fix error handling at afunc_bindPeter Chen
commit f1d3861d63a5d79b8968a02eea1dcb01bb684e62 upstream. The current error handling flow uses incorrect goto label, fix it Fixes: d12a8727171c ("usb: gadget: function: Remove redundant usb_free_all_descriptors") Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06usb: hub: Fix auto-remount of safely removed or ejected USB-3 devicesMathias Nyman
commit 37be66767e3cae4fd16e064d8bb7f9f72bf5c045 upstream. USB-3 does not have any link state that will avoid negotiating a connection with a plugged-in cable but will signal the host when the cable is unplugged. For USB-3 we used to first set the link to Disabled, then to RxDdetect to be able to detect cable connects or disconnects. But in RxDetect the connected device is detected again and eventually enabled. Instead set the link into U3 and disable remote wakeups for the device. This is what Windows does, and what Alan Stern suggested. Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06USB: cdc-acm: add device id for GW Instek AFG-125Nathaniel Quillin
commit 301216044e4c27d5a7323c1fa766266fad00db5e upstream. Add device-id entry for GW Instek AFG-125, which has a byte swapped bInterfaceSubClass (0x20). Signed-off-by: Nathaniel Quillin <ndq@google.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06USB: serial: kl5kusb105: fix open error pathJohan Hovold
commit 6774d5f53271d5f60464f824748995b71da401ab upstream. Kill urbs and disable read before returning from open on failure to retrieve the line state. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06USB: serial: option: add dlink dwm-158Giuseppe Lippolis
commit d8a12b7117b42fd708f1e908498350232bdbd5ff upstream. Adding registration for 3G modem DWM-158 in usb-serial-option Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041Daniele Palmas
commit 5b09eff0c379002527ad72ea5ea38f25da8a8650 upstream. This patch adds support for PIDs 0x1040, 0x1041 of Telit LE922A. Since the interface positions are the same than the ones used for other Telit compositions, previous defined blacklists are used. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06Btrfs: fix qgroup rescan worker initializationFilipe Manana
commit 8d9eddad19467b008e0c881bc3133d7da94b7ec1 upstream. We were setting the qgroup_rescan_running flag to true only after the rescan worker started (which is a task run by a queue). So if a user space task starts a rescan and immediately after asks to wait for the rescan worker to finish, this second call might happen before the rescan worker task starts running, in which case the rescan wait ioctl returns immediatley, not waiting for the rescan worker to finish. This was making the fstest btrfs/022 fail very often. Fixes: d2c609b834d6 (btrfs: properly track when rescan worker is running) Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06btrfs: store and load values of stripes_min/stripes_max in balance status itemDavid Sterba
commit ed0df618b1b06d7431ee4d985317fc5419a5d559 upstream. The balance status item contains currently known filter values, but the stripes filter was unintentionally not among them. This would mean, that interrupted and automatically restarted balance does not apply the stripe filters. Fixes: dee32d0ac3719ef8d640efaf0884111df444730f Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06Btrfs: fix tree search logic when replaying directory entry deletesRobbie Ko
commit 2a7bf53f577e49c43de4ffa7776056de26db65d9 upstream. If a log tree has a layout like the following: leaf N: ... item 240 key (282 DIR_LOG_ITEM 0) itemoff 8189 itemsize 8 dir log end 1275809046 leaf N + 1: item 0 key (282 DIR_LOG_ITEM 3936149215) itemoff 16275 itemsize 8 dir log end 18446744073709551615 ... When we pass the value 1275809046 + 1 as the parameter start_ret to the function tree-log.c:find_dir_range() (done by replay_dir_deletes()), we end up with path->slots[0] having the value 239 (points to the last item of leaf N, item 240). Because the dir log item in that position has an offset value smaller than *start_ret (1275809046 + 1) we need to move on to the next leaf, however the logic for that is wrong since it compares the current slot to the number of items in the leaf, which is smaller and therefore we don't lookup for the next leaf but instead we set the slot to point to an item that does not exist, at slot 240, and we later operate on that slot which has unexpected content or in the worst case can result in an invalid memory access (accessing beyond the last page of leaf N's extent buffer). So fix the logic that checks when we need to lookup at the next leaf by first incrementing the slot and only after to check if that slot is beyond the last item of the current leaf. Signed-off-by: Robbie Ko <robbieko@synology.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Fixes: e02119d5a7b4 (Btrfs: Add a write ahead tree log to optimize synchronous operations) Signed-off-by: Filipe Manana <fdmanana@suse.com> [Modified changelog for clarity and correctness] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06btrfs: limit async_work allocation and worker func durationMaxim Patlasov
commit 2939e1a86f758b55cdba73e29397dd3d94df13bc upstream. Problem statement: unprivileged user who has read-write access to more than one btrfs subvolume may easily consume all kernel memory (eventually triggering oom-killer). Reproducer (./mkrmdir below essentially loops over mkdir/rmdir): [root@kteam1 ~]# cat prep.sh DEV=/dev/sdb mkfs.btrfs -f $DEV mount $DEV /mnt for i in `seq 1 16` do mkdir /mnt/$i btrfs subvolume create /mnt/SV_$i ID=`btrfs subvolume list /mnt |grep "SV_$i$" |cut -d ' ' -f 2` mount -t btrfs -o subvolid=$ID $DEV /mnt/$i chmod a+rwx /mnt/$i done [root@kteam1 ~]# sh prep.sh [maxim@kteam1 ~]$ for i in `seq 1 16`; do ./mkrmdir /mnt/$i 2000 2000 & done [root@kteam1 ~]# for i in `seq 1 4`; do grep "kmalloc-128" /proc/slabinfo | grep -v dma; sleep 60; done kmalloc-128 10144 10144 128 32 1 : tunables 0 0 0 : slabdata 317 317 0 kmalloc-128 9992352 9992352 128 32 1 : tunables 0 0 0 : slabdata 312261 312261 0 kmalloc-128 24226752 24226752 128 32 1 : tunables 0 0 0 : slabdata 757086 757086 0 kmalloc-128 42754240 42754240 128 32 1 : tunables 0 0 0 : slabdata 1336070 1336070 0 The huge numbers above come from insane number of async_work-s allocated and queued by btrfs_wq_run_delayed_node. The problem is caused by btrfs_wq_run_delayed_node() queuing more and more works if the number of delayed items is above BTRFS_DELAYED_BACKGROUND. The worker func (btrfs_async_run_delayed_root) processes at least BTRFS_DELAYED_BATCH items (if they are present in the list). So, the machinery works as expected while the list is almost empty. As soon as it is getting bigger, worker func starts to process more than one item at a time, it takes longer, and the chances to have async_works queued more than needed is getting higher. The problem above is worsened by another flaw of delayed-inode implementation: if async_work was queued in a throttling branch (number of items >= BTRFS_DELAYED_WRITEBACK), corresponding worker func won't quit until the number of items < BTRFS_DELAYED_BACKGROUND / 2. So, it is possible that the func occupies CPU infinitely (up to 30sec in my experiments): while the func is trying to drain the list, the user activity may add more and more items to the list. The patch fixes both problems in straightforward way: refuse queuing too many works in btrfs_wq_run_delayed_node and bail out of worker func if at least BTRFS_DELAYED_WRITEBACK items are processed. Changed in v2: remove support of thresh == NO_THRESHOLD. Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-15Linux 4.4.39v4.4.39Greg Kroah-Hartman
2016-12-15crypto: rsa - Add Makefile dependencies to fix parallel buildsDavid Michael
commit 57891633eeef60e732e045731cf20e50ee80acb4 upstream. Both asn1 headers are included by rsa_helper.c, so rsa_helper.o should explicitly depend on them. Signed-off-by: David Michael <david.michael@coreos.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-15hotplug: Make register and unregister notifier API symmetricMichal Hocko
commit 777c6e0daebb3fcefbbd6f620410a946b07ef6d0 upstream. Yu Zhao has noticed that __unregister_cpu_notifier only unregisters its notifiers when HOTPLUG_CPU=y while the registration might succeed even when HOTPLUG_CPU=n if MODULE is enabled. This means that e.g. zswap might keep a stale notifier on the list on the manual clean up during the pool tear down and thus corrupt the list. Resulting in the following [ 144.964346] BUG: unable to handle kernel paging request at ffff880658a2be78 [ 144.971337] IP: [<ffffffffa290b00b>] raw_notifier_chain_register+0x1b/0x40 <snipped> [ 145.122628] Call Trace: [ 145.125086] [<ffffffffa28e5cf8>] __register_cpu_notifier+0x18/0x20 [ 145.131350] [<ffffffffa2a5dd73>] zswap_pool_create+0x273/0x400 [ 145.137268] [<ffffffffa2a5e0fc>] __zswap_param_set+0x1fc/0x300 [ 145.143188] [<ffffffffa2944c1d>] ? trace_hardirqs_on+0xd/0x10 [ 145.149018] [<ffffffffa2908798>] ? kernel_param_lock+0x28/0x30 [ 145.154940] [<ffffffffa2a3e8cf>] ? __might_fault+0x4f/0xa0 [ 145.160511] [<ffffffffa2a5e237>] zswap_compressor_param_set+0x17/0x20 [ 145.167035] [<ffffffffa2908d3c>] param_attr_store+0x5c/0xb0 [ 145.172694] [<ffffffffa290848d>] module_attr_store+0x1d/0x30 [ 145.178443] [<ffffffffa2b2b41f>] sysfs_kf_write+0x4f/0x70 [ 145.183925] [<ffffffffa2b2a5b9>] kernfs_fop_write+0x149/0x180 [ 145.189761] [<ffffffffa2a99248>] __vfs_write+0x18/0x40 [ 145.194982] [<ffffffffa2a9a412>] vfs_write+0xb2/0x1a0 [ 145.200122] [<ffffffffa2a9a732>] SyS_write+0x52/0xa0 [ 145.205177] [<ffffffffa2ff4d97>] entry_SYSCALL_64_fastpath+0x12/0x17 This can be even triggered manually by changing /sys/module/zswap/parameters/compressor multiple times. Fix this issue by making unregister APIs symmetric to the register so there are no surprises. Fixes: 47e627bc8c9a ("[PATCH] hotplug: Allow modules to use the cpu hotplug notifiers even if !CONFIG_HOTPLUG_CPU") Reported-and-tested-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: linux-mm@kvack.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Streetman <ddstreet@ieee.org> Link: http://lkml.kernel.org/r/20161207135438.4310-1-mhocko@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-15batman-adv: Check for alloc errors when preparing TT local dataSven Eckelmann
commit c2d0f48a13e53b4747704c9e692f5e765e52041a upstream. batadv_tt_prepare_tvlv_local_data can fail to allocate the memory for the new TVLV block. The caller is informed about this problem with the returned length of 0. Not checking this value results in an invalid memory access when either tt_data or tt_change is accessed. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-15m68k: Fix ndelay() macroBoris Brezillon
commit 7e251bb21ae08ca2e4fb28cc0981fac2685a8efa upstream. The current ndelay() macro definition has an extra semi-colon at the end of the line thus leading to a compilation error when ndelay is used in a conditional block without curly braces like this one: if (cond) ndelay(t); else ... which, after the preprocessor pass gives: if (cond) m68k_ndelay(t);; else ... thus leading to the following gcc error: error: 'else' without a previous 'if' Remove this extra semi-colon. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: c8ee038bd1488 ("m68k: Implement ndelay() based on the existing udelay() logic") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-15arm64: futex.h: Add missing PAN togglingJames Morse
commit 811d61e384e24759372bb3f01772f3744b0a8327 upstream. futex.h's futex_atomic_cmpxchg_inatomic() does not use the __futex_atomic_op() macro and needs its own PAN toggling. This was missed when the feature was implemented. Fixes: 338d4f49d6f ("arm64: kernel: Add support for Privileged Access Never") Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Mian Yousaf Kaukab <yousaf.kaukab@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-15can: peak: fix bad memory access and free sequence추지호
commit b67d0dd7d0dc9e456825447bbeb935d8ef43ea7c upstream. Fix for bad memory access while disconnecting. netdev is freed before private data free, and dev is accessed after freeing netdev. This makes a slub problem, and it raise kernel oops with slub debugger config. Signed-off-by: Jiho Chu <jiho.chu@samsung.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-15can: raw: raw_setsockopt: limit number of can_filter that can be setMarc Kleine-Budde
commit 332b05ca7a438f857c61a3c21a88489a21532364 upstream. This patch adds a check to limit the number of can_filters that can be set via setsockopt on CAN_RAW sockets. Otherwise allocations > MAX_ORDER are not prevented resulting in a warning. Reference: https://lkml.org/lkml/2016/12/2/230 Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-19 00:19:08 +0000