summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2015-01-27ENGR00324639 usb: chipidea: set ITC to 0 for device modePeter Chen
2015-01-27MLK-9785-5 usb: chipidea: usbmisc_imx: add unburst setting for imx6Peter Chen
2015-01-27MLK-9785-3 usb: chipidea: imx: change ahb burst settingPeter Chen
2015-01-27MLK-9785-2 usb: chipidea: add AHB configuration interfacePeter Chen
2015-01-27MLK-9785-1 usb: host: ehci-hcd: enable park modePeter Chen
2015-01-27MLK-9770-3 usb: chipidea: imx: add stream mode enable for device mode at imx6...Peter Chen
2015-01-27MLK-9770-2 usb: chipidea: define stream mode disable for both rolesPeter Chen
2015-01-27ENGR00325724-4 usb: chipidea: udc: disconnect host if system enters suspendPeter Chen
2015-01-27ENGR00289645 usb: chipidea: udc: don't do hardware access if gadget has stoppedPeter Chen
2015-01-27MLK-10144 thermal: imx: fix potential issues for thermal driverBai Ping
2015-01-26MLK-10147 imx_v7_defconfig: remove unnessary configFugang Duan
2015-01-26MLK-10146 arm: mcc: fix one compile error when DYNAMIC_DEBUG is setRichard Zhu
2015-01-26MLK-10086-5 usb: chipidea: imx: define quirk CI_HDRC_IMX_EHCI_QUIRKPeter Chen
2015-01-26MLK-10086-4 usb: chipidea: imx: add HSIC supportLi Jun
2015-01-26MLK-10086-3 usb: phy-nop: add the implementation of .set_suspendLi Jun
2015-01-26MLK-10086-2 ARM: imx6: add dts entries for hsic controllerLi Jun
2015-01-26MLK-10086-1 usb: doc: ci-hdrc-imx: update for hsic controllerLi Jun
2015-01-26MLK-10132-3 usb: chipidea: udc: do not enter low power mode if vbus onLi Jun
2015-01-26MLK-9831-1 usb: chipidea: udc: refine ci_udc_startLi Jun
2015-01-26MLK-9897-1 usb: chipidea: otg: use shared queue to handle hnp pollingLi Jun
2015-01-26net: fec: fix the warning found by dma debugNimrod Andy
2015-01-26MLK-10142-3 imx_v7_defconfig: add elan touch screen supportHaibo Chen
2015-01-26MLK-10142-2 ARM: dts: imx6sl-evk: add elan touch supportHaibo Chen
2015-01-26MLK-10142-1 touchscreen: elan: add elan touch screen driver supportHaibo Chen
2015-01-24MLK-10132-1 usb: chipidea: imx: fix a typo of i.mx6sxLi Jun
2015-01-24MLK-10102-11 usb: chipidea: imx: export imx_usbmisc_power_lost_checkLi Jun
2015-01-22MLK-10131 flexcan: fix wakeup unwork issueDong Aisheng
2015-01-22ath6kl: fix struct hif_scatter_req list handlingKalle Valo
2015-01-22MLK-10117-5:dts: Enable dispmix power management in imx6sx/sl dtsSandor Yu
2015-01-22MLK-10117-4: mxsfb: Add lcdif register config in enable panel functionSandor Yu
2015-01-22MLK-10117-3:csi: remove runtime suspend/resume functionSandor Yu
2015-01-22MLK-10117-2:pxp: Remove runtime suspend/resume functionSandor Yu
2015-01-22MLK-10117-1: gpc: add dispmix power save featureSandor Yu
2015-01-21ENGR00319720-9 Documentation: usb: chipidea: Update test procedure for HNP po...Li Jun
2015-01-21ENGR00319720-7 usb: chipidea: otg_fsm: set host request flag via sys inputLi Jun
2015-01-21MLK-10051-2 usb: common: otg: set feature of b_hnp_enable after host request ...Li Jun
2015-01-21ENGR00319720-6 usb: chipidea: otg_fsm: add HNP polling supportLi Jun
2015-01-21ENGR00319720-5 usb: chipidea: udc: add OTG status request handlingLi Jun
2015-01-21MLK-9794-2 usb: common: otg: clear host_request_flag when leaves peripheralLi Jun
2015-01-21ENGR00319720-3 usb: common: otg-fsm: add HNP polling request sending funcitonLi Jun
2015-01-21ENGR00319720-2 usb: common: otg-fsm: start HNP polling timer in host stateLi Jun
2015-01-21ENGR00319720-1 usb: gadget: add host_request_flag in usb_gadget for OTGLi Jun
2015-01-21MLK-9833-1 ARM: imx6sx: only set can clock parent when M4 disabledDong Aisheng
2015-01-21MLK-9833-2 dts: imx6sx: do not touch CAN gpios pads if M4 is enabledDong Aisheng
2015-01-21MLK-9834 mmc: sdhci-esdhc-imx: fix SD3.0 failed to resume if M/F is enabledDong Aisheng
2015-01-21ENGR00324668 mmc: core: add delay for SD3.0 UHS mode switchDong Aisheng
2015-01-21MLK-9428 dts: imx6sx: optimize can pad settingsDong Aisheng
2015-01-21MLK-9501 dts: imx6sx-sdb: optimize usdhc3 pad settingsDong Aisheng
2015-01-21MLK-9871 dts: imx6sx: remove canfd related stuffDong Aisheng
2015-01-21MLK-9975-2 imx6sx-ard: fix CAN unwork if power up the borad on first timeDong Aisheng
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-19 03:43:47 +0000