summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2013-02-26ENGR00241003-2 pfuze: using _sel interface to add delay supportrel_imx_3.0.35_1.0.2Anson Huang
2013-02-26ENGR00241003-1 mx6: need to add delay in LDO voltage settingAnson Huang
2012-10-18perf tools: Fix build against newer glibcJosh Boyer
2012-09-14ENGR00224245 HDMI AUDIO: stop/start PCM while unplug,blank/plug, unblankrel_imx_3.0.35_12.09.013.0-imx6-12.09.01-201209132128Chen Liangjun
2012-09-13ENGR00223349-4 gpmi: enable the EDO support for mx6qHuang Shijie
2012-09-13ENGR00223349-3 gpmi: add a new field for HW_GPMI_CTRL1Huang Shijie
2012-09-13ENGR00223349-2 gpmi: do not get the clock frequency in gpmi_begin()Huang Shijie
2012-09-13ENGR00223349-1 gpmi: add a new field for HW_GPMI_TIMING1Huang Shijie
2012-09-13ENGR00223816 HDMI AUDIO: fix kernel panic cause by accessing unavailable memoryChen Liangjun
2012-09-13ENGR00224112 wm8962: correct lrclk mismatchGary Zhang
2012-09-12ENGR00223964: CAAM: enable ahash feature in configTerry Lv
2012-09-12ENGR00223911 wm8962: correct typoGary Zhang
2012-09-12ENGR00223450 [MX6]Fix secondary cores BogoMIPs errorAnson Huang
2012-09-12ENGR00221671 - i2c :imx : fix some i2c devices can not suspendFugang Duan
2012-09-12ENGR00223249 : fix Ethernet performance downgrade issue.Fugang Duan
2012-09-07ENGR00223344 [Thermal]Fix clk enable flow bugAnson Huang
2012-09-06ENGR00223236-2 [MX6]Change the temperature range to -40C ~ 125CAnson Huang
2012-09-06ENGR00222954 Enable PLL3 in GPU power up flowLoren Huang
2012-09-06ENGR00223103 ESAI ASRC: clean build warningChen Liangjun
2012-09-06ENGR00223056 Fix HDMI build warningSandor Yu
2012-09-05ENGR00222078 power battery:fix charger attach detect missing after resumeRong Dian
2012-09-05ENGR00223097 sabresd pfuze:increase VDDARM_IN&VDDSOC_IN to 1.475V for 1.2GRobin Gong
2012-09-05ENGR00223058 [MX6]Fix build warningAnson Huang
2012-09-05ENGR00221854 HDMI: suspend/resume hdmi_phy fail to lock.Sandor Yu
2012-09-05ENGR00222900 HDMI AUDIO: fix kernel panic when doing suspend-resume testChen Liangjun
2012-09-05ENGR00215870-2: board-mx6 sabreauto fix i2c3 pad settingsAdrian Alonso
2012-09-05ENGR00215870-1 board-mx6 sabreauto rev B add extra padsAdrian Alonso
2012-09-05ENGR00222836 Fix Kern BUG during Susp/Resu caused by SPDIF debug codeNicolin Chen
2012-09-05ENGR00222855 MX6 CPUFREQ: support three VDDSOC setpointsRobin Gong
2012-09-05ENGR00222835 MX6x-Fix incorrect enabling/disabling of PLL1Ranjani Vaidyanathan
2012-09-05ENGR00222834 MX6x-A9 prefetcher should not access DDR before IO is restoredRanjani Vaidyanathan
2012-09-05ENGR00222197 MX6 SabreSD:Set pwm backlight max density to 248Liu Ying
2012-09-05ENGR00222157 MX6x-Fix bug in transitioning from low_bus to audio_bus mode.Ranjani Vaidyanathan
2012-09-05ENGR00222257 MX6x-Prime TLB entries before DDR enters self-refresh.Ranjani Vaidyanathan
2012-09-05ENGR00222134 MX6x - Fix race-conditions in low power code.Ranjani Vaidyanathan
2012-09-05ENGR00222133 MX6SL - Fix crashes caused by Low power IDLE supportRanjani Vaidyanathan
2012-09-05ENGR00221370 IPUv3:Clean up IPUv3 interrupt handlerLiu Ying
2012-09-05ENGR00221218: imx6: remove redundant spi defineRobby Cai
2012-09-05ENGR00221983 IPUv3:Correct ERR and SYNC interrupt line numbersLiu Ying
2012-09-05ENGR00221975 Fix race condition in clock code.Ranjani Vaidyanathan
2012-09-05ENGR00221974 MX6SL-Fix system hang/crash issue in low power IDLERanjani Vaidyanathan
2012-09-05ENGR00221970 MX6SL:Fix suspend/resume issue on MX6SLEVKRanjani Vaidyanathan
2012-09-03ENGR00215875-2: caam: fix descriptor buffer overrun in hash_digest_key()Steve Cornelius
2012-09-03ENGR00215875-1: caam: improve initalization for context state savesSteve Cornelius
2012-08-30ENGR00222005 mfgtool can't work on mx6sl evk boardTony LIU
2012-08-29ENGR00221902 [MX6]Fix udelay inaccurate issue during suspend/resumeAnson Huang
2012-08-29ENGR00221867 sabresd : support adjust VDDSOC if enable LDO bypassRobin Gong
2012-08-29ENGR00221716-02 Mx6 USB host: add port speed define MACRO to arc_otg.hmake shi
2012-08-29ENGR00221716-01 Mx6 USB host: set disconnect bit should wait for resume finishedmake shi
2012-08-29ENGR00182456-3 HDMI VIDEO: abort audio when unblank and plugoutChen Liangjun
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-16 12:00:22 +0000