summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-31Linux 3.13.8v3.13.8Greg Kroah-Hartman
2014-03-31libceph: fix preallocation check in get_reply()Ilya Dryomov
commit f2be82b0058e90b5d9ac2cb896b4914276fb50ef upstream. The check that makes sure that we have enough memory allocated to read in the entire header of the message in question is currently busted. It compares front_len of the incoming message with iov_len field of ceph_msg::front structure, which is used primarily to indicate the amount of data already read in, and not the size of the allocated buffer. Under certain conditions (e.g. a short read from a socket followed by that socket's shutdown and owning ceph_connection reset) this results in a warning similar to [85688.975866] libceph: get_reply front 198 > preallocated 122 (4#0) and, through another bug, leads to forever hung tasks and forced reboots. Fix this by comparing front_len with front_alloc_len field of struct ceph_msg, which stores the actual size of the buffer. Fixes: http://tracker.ceph.com/issues/5425 Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31libceph: rename front to front_len in get_reply()Ilya Dryomov
commit 3f0a4ac55fe036902e3666be740da63528ad8639 upstream. Rename front local variable to front_len in get_reply() to make its purpose more clear. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31libceph: rename ceph_msg::front_max to front_alloc_lenIlya Dryomov
commit 3cea4c3071d4e55e9d7356efe9d0ebf92f0c2204 upstream. Rename front_max field of struct ceph_msg to front_alloc_len to make its purpose more clear. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31e100: Fix "disabling already-disabled device" warningMichele Baldessari
commit 2b6e0ca175fe4a20f21ba82b1e7ccc71029c4dd4 upstream. In https://bugzilla.redhat.com/show_bug.cgi?id=994438 and https://bugzilla.redhat.com/show_bug.cgi?id=970480 we received different reports of e100 throwing the following warning: [<c06a0ba5>] ? pci_disable_device+0x85/0x90 [<c044a153>] warn_slowpath_fmt+0x33/0x40 [<c06a0ba5>] pci_disable_device+0x85/0x90 [<f7fdf7e0>] __e100_shutdown+0x80/0x120 [e100] [<c0476ca5>] ? check_preempt_curr+0x65/0x90 [<f7fdf8d6>] e100_suspend+0x16/0x30 [e100] [<c06a1ebb>] pci_legacy_suspend+0x2b/0xb0 [<c098fc0f>] ? wait_for_completion+0x1f/0xd0 [<c06a2d50>] ? pci_pm_poweroff+0xb0/0xb0 [<c06a2de4>] pci_pm_freeze+0x94/0xa0 [<c0767bb7>] dpm_run_callback+0x37/0x80 [<c076a204>] ? pm_wakeup_pending+0xc4/0x140 [<c0767f12>] __device_suspend+0xb2/0x1f0 [<c076806f>] async_suspend+0x1f/0x90 [<c04706e5>] async_run_entry_fn+0x35/0x140 [<c0478aef>] ? wake_up_process+0x1f/0x40 [<c0464495>] process_one_work+0x115/0x370 [<c0462645>] ? start_worker+0x25/0x30 [<c0464dc5>] ? manage_workers.isra.27+0x1a5/0x250 [<c0464f6e>] worker_thread+0xfe/0x330 [<c0464e70>] ? manage_workers.isra.27+0x250/0x250 [<c046a224>] kthread+0x94/0xa0 [<c0997f37>] ret_from_kernel_thread+0x1b/0x28 [<c046a190>] ? insert_kthread_work+0x30/0x30 This patch removes pci_disable_device() from __e100_shutdown(). pci_clear_master() is enough. Signed-off-by: Michele Baldessari <michele@acksyn.org> Tested-by: Mark Harig <idirectscm@aim.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31xhci: Fix resume issues on Renesas chips in Samsung laptopsSarah Sharp
commit 1aa9578c1a9450fb21501c4f549f5b1edb557e6d upstream. Don Zickus <dzickus@redhat.com> writes: Some co-workers of mine bought Samsung laptops that had mostly usb3 ports. Those ports did not resume correctly (the driver would timeout communicating and fail). This led to frustration as suspend/resume is a common use for laptops. Poking around, I applied the reset on resume quirk to this chipset and the resume started working. Reloading the xhci_hcd module had been the temporary workaround. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Don Zickus <dzickus@redhat.com> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31Input: wacom - add reporting of SW_MUTE_DEVICE eventsPing Cheng
commit 961794a00eab03f4344b7d5e825e8e789e55da87 upstream. New Intuos series models added a hardware switch to turn touch data on/off. The state of the switch is reported periodically from the tablet. To report the state the driver will emit SW_MUTE_DEVICE events. Reviewed_by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31Input: wacom - add support for three new Intuos devicesPing Cheng
commit b5fd2a3e92ca5c8c1f3c20d31ac5daed3ec4d604 upstream. Two tablets in this series support both pen and touch. One (Intuos S) only supports pen. This patch also updates the driver to process wireless devices that do not support touch interface. Tested-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31Input: wacom - make sure touch_max is set for touch devicesPing Cheng
commit 1d0d6df02750b4a6f466768cbfbf860e24f4c8d4 upstream. Old single touch Tablet PCs do not have touch_max set at wacom_features. Since touch device at lease supports one finger, assign touch_max to 1 when touch usage is defined in its HID Descriptor and touch_max is not pre-defined. Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31KVM: VMX: fix use after free of vmx->loaded_vmcsMarcelo Tosatti
commit 26a865f4aa8e66a6d94958de7656f7f1b03c6c56 upstream. After free_loaded_vmcs executes, the "loaded_vmcs" structure is kfreed, and now vmx->loaded_vmcs points to a kfreed area. Subsequent free_loaded_vmcs then attempts to manipulate vmx->loaded_vmcs. Switch the order to avoid the problem. https://bugzilla.redhat.com/show_bug.cgi?id=1047892 Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31KVM: x86: handle invalid root_hpa everywhereMarcelo Tosatti
commit 37f6a4e237303549c8676dfe1fd1991ceab512eb upstream. Rom Freiman <rom@stratoscale.com> notes other code paths vulnerable to bug fixed by 989c6b34f6a9480e397b. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31KVM: MMU: handle invalid root_hpa at __direct_mapMarcelo Tosatti
commit 989c6b34f6a9480e397b170cc62237e89bf4fdb9 upstream. It is possible for __direct_map to be called on invalid root_hpa (-1), two examples: 1) try_async_pf -> can_do_async_pf -> vmx_interrupt_allowed -> nested_vmx_vmexit 2) vmx_handle_exit -> vmx_interrupt_allowed -> nested_vmx_vmexit Then to load_vmcs12_host_state and kvm_mmu_reset_context. Check for this possibility, let fault exception be regenerated. BZ: https://bugzilla.redhat.com/show_bug.cgi?id=924916 Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31Input: elantech - improve clickpad detectionHans de Goede
commit c15bdfd5b9831e4cab8cfc118243956e267dd30e upstream. The current assumption in the elantech driver that hw version 3 touchpads are never clickpads and hw version 4 touchpads are always clickpads is wrong. There are several bug reports for this, ie: https://bugzilla.redhat.com/show_bug.cgi?id=1030802 http://superuser.com/questions/619582/right-elantech-touchpad-button-not-working-in-linux I've spend a couple of hours wading through various bugzillas, launchpads and forum posts to create a list of fw-versions and capabilities for different laptop models to find a good method to differentiate between clickpads and versions with separate hardware buttons. Which shows that a device being a clickpad is reliable indicated by bit 12 being set in the fw_version. I've included the gathered list inside the driver, so that we've this info at hand if we need to revisit this later. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31fs/proc/proc_devtree.c: remove empty /proc/device-tree when no openfirmware ↵Dave Jones
exists. commit c1d867a54d426b45da017fbe8e585f8a3064ce8d upstream. Distribution kernels might want to build in support for /proc/device-tree for kernels that might end up running on hardware that doesn't support openfirmware. This results in an empty /proc/device-tree existing. Remove it if the OFW root node doesn't exist. This situation actually confuses grub2, resulting in install failures. grub2 sees the /proc/device-tree and picks the wrong install target cf. http://bzr.savannah.gnu.org/lh/grub/trunk/grub/annotate/4300/util/grub-install.in#L311 grub should be more robust, but still, leaving an empty proc dir seems pointless. Addresses https://bugzilla.redhat.com/show_bug.cgi?id=818378. Signed-off-by: Dave Jones <davej@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31powerpc/powernv: Refactor PHB diag-data dumpGavin Shan
commit af87d2fe95444d107e0c0cf0ba7e20e6716a7bfd upstream. As Ben suggested, the patch prints PHB diag-data with multiple fields in one line and omits the line if the fields of that line are all zero. With the patch applied, the PHB3 diag-data dump looks like: PHB3 PHB#3 Diag-data (Version: 1) brdgCtl: 00000002 RootSts: 0000000f 00400000 b0830008 00100147 00002000 nFir: 0000000000000000 0030006e00000000 0000000000000000 PhbSts: 0000001c00000000 0000000000000000 Lem: 0000000000100000 42498e327f502eae 0000000000000000 InAErr: 8000000000000000 8000000000000000 0402030000000000 0000000000000000 PE[ 8] A/B: 8480002b00000000 8000000000000000 [ The current diag data is so big that it overflows the printk buffer pretty quickly in cases when we get a handful of errors at once which can happen. --BenH ] Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31powerpc/powernv: Dump PHB diag-data immediatelyGavin Shan
commit 947166043732b69878123bf31f51933ad0316080 upstream. The PHB diag-data is important to help locating the root cause for EEH errors such as frozen PE or fenced PHB. However, the EEH core enables IO path by clearing part of HW registers before collecting this data causing it to be corrupted. This patch fixes this by dumping the PHB diag-data immediately when frozen/fenced state on PE or PHB is detected for the first time in eeh_ops::get_state() or next_error() backend. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31powerpc/eeh: Handle multiple EEH errorsGavin Shan
commit 7e4e7867b1e551b7b8f326da3604c47332972bc6 upstream. For one PCI error relevant OPAL event, we possibly have multiple EEH errors for that. For example, multiple frozen PEs detected on different PHBs. Unfortunately, we didn't cover the case. The patch enumarates the return value from eeh_ops::next_error() and change eeh_handle_special_event() and eeh_ops::next_error() to handle all existing EEH errors. As Ben pointed out, we needn't list_for_each_entry_safe() since we are not deleting any PHB from the hose_list and the EEH serialized lock should be held while purging EEH events. The patch covers those suggestions as well. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31powerpc/powernv: Move PHB-diag dump functions aroundGavin Shan
commit 93aef2a789778e7ec787179fc9b34ca4885a5ef3 upstream. Prior to the completion of PCI enumeration, we actively detects EEH errors on PCI config cycles and dump PHB diag-data if necessary. The EEH backend also dumps PHB diag-data in case of frozen PE or fenced PHB. However, we are using different functions to dump the PHB diag-data for those 2 cases. The patch merges the functions for dumping PHB diag-data to one so that we can avoid duplicate code. Also, we never dump PHB3 diag-data during PCI config cycles with frozen PE. The patch fixes it as well. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31regulator: core: Replace direct ops->disable usageMarkus Pargmann
commit 66fda75f47dc583f1c187556e9a2c082dd64f8c6 upstream. There are many places where ops->disable is called directly. Instead we should use _regulator_do_disable() which also handles gpio regulators. To be able to use the wrapper function from _regulator_force_disable(), I moved the _notifier_call_chain() call from _regulator_do_disable() to _regulator_disable(). This way, _regulator_force_disable() can use different flags for _notifier_call_chain() without calling it twice. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31p54: clamp properly instead of just truncatingDan Carpenter
commit 608cfbe4abaf76e9d732efd7ed1cfa3998163d91 upstream. The call to clamp_t() first truncates the variable signed 8 bit and as a result, the actual clamp is a no-op. Fixes: 0d78156eef1d ('p54: improve site survey') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31MIPS: Fix build error seen in some configurationsGuenter Roeck
commit 63238f2cc5518e1c45a3418fc0ac0f560dafe7ef upstream. The following build error is seen if CONFIG_32BIT is undefined, CONFIG_64BIT is defined, and CONFIG_MIPS32_O32 is undefined. asm/syscall.h: In function 'mips_get_syscall_arg': arch/mips/include/asm/syscall.h:32:16: error: unused variable 'usp' [-Werror=unused-variable] cc1: all warnings being treated as errors Fixes: c0ff3c53d4f9 ('MIPS: Enable HAVE_ARCH_TRACEHOOK') Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6160/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31deb-pkg: Fix cross-building linux-headers packageBen Hutchings
commit f8ce239dfc7ba9add41d9ecdc5e7810738f839fa upstream. builddeb generates a control file that says the linux-headers package can only be built for the build system primary architecture. This breaks cross-building configurations. We should use $debarch for this instead. Since $debarch is not yet set when generating the control file, set Architecture: any and use control file variables to fill in the description. Fixes: cd8d60a20a45 ('kbuild: create linux-headers package in deb-pkg') Reported-and-tested-by: "Niew, Sh." <shniew@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31deb-pkg: Fix building for MIPS big-endian or ARM OABIBen Hutchings
commit c5e318f67eebbad491615a752c51dbfde7dc3d78 upstream. These commands will mysteriously fail: $ make ARCH=arm versatile_defconfig [...] $ make ARCH=arm deb-pkg [...] make[1]: *** [deb-pkg] Error 1 make: *** [deb-pkg] Error 2 The Debian architecture selection for these kernel architectures does 'grep FOO=y $KCONFIG_CONFIG && echo bar', and after 'set -e' this aborts the script if grep does not find the given config symbol. Fixes: 10f26fa64200 ('build, deb-pkg: select userland architecture based on UTS_MACHINE') Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31perf tools: Fix AAAAARGH64 memory barriersPeter Zijlstra
commit f428ebd184c82a7914b2aa7e9f868918aaf7ea78 upstream. Someone got the load and store barriers mixed up for AAAAARGH64. Turn them the right side up. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Fixes: a94d342b9cb0 ("tools/perf: Add required memory barriers") Cc: Ingo Molnar <mingo@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20140124154002.GF31570@twins.programming.kicks-ass.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31Fix uses of dma_max_pfn() when converting to a limiting addressRussell King
commit e83b366487b5582274374f8226e489cb214ae5a6 upstream. We must use a 64-bit for this, otherwise overflowed bits get lost, and that can result in a lower than intended value set. Fixes: 8e0cb8a1f6ac ("ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations") Fixes: 7d35496dd982 ("ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations") Tested-Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31printk: fix syslog() overflowing user bufferLinus Torvalds
commit e4178d809fdaee32a56833fff1f5056c99e90a1a upstream. This is not a buffer overflow in the traditional sense: we don't overflow any *kernel* buffers, but we do mis-count the amount of data we copy back to user space for the SYSLOG_ACTION_READ_ALL case. In particular, if the user buffer is too small to hold everything, and *if* there is a continuation line at just the right place, we can end up giving the user more data than he asked for. The reason is that we first count up the number of bytes all the log records contains, then we walk the records again until we've skipped the records at the beginning that won't fit, and then we walk the rest of the records and copy them to the user space buffer. And in between that "skip the initial records that won't fit" and the "copy the records that *will* fit to user space", we reset the 'prev' variable that contained the record information for the last record not copied. That meant that when we started copying to user space, we now had a different character count than what we had originally calculated in the first record walk-through. The fix is to simply not clear the 'prev' flags value (in both cases where we had the same logic: syslog_print_all and kmsg_dump_get_buffer: the latter is used for pstore-like dumping) Reported-and-tested-by: Debabrata Banerjee <dbanerje@akamai.com> Acked-by: Kay Sievers <kay@vrfy.org> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Josh Hunt <joshhunt00@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31x86: bpf_jit: support negative offsetsAlexei Starovoitov
commit fdfaf64e75397567257e1051931f9a3377360665 upstream. Commit a998d4342337 claimed to introduce negative offset support to x86 jit, but it couldn't be working, since at the time of the execution of LD+ABS or LD+IND instructions via call into bpf_internal_load_pointer_neg_helper() the %edx (3rd argument of this func) had junk value instead of access size in bytes (1 or 2 or 4). Store size into %edx instead of %ecx (what original commit intended to do) Fixes: a998d4342337 ("bpf jit: Let the x86 jit handle negative offsets") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Jan Seiffert <kaffeemonster@googlemail.com> Cc: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31SUNRPC: Fix a pipe_version reference leakTrond Myklebust
commit e9776d0f4adee8877145672f6416b06b57f2dc27 upstream. In gss_alloc_msg(), if the call to gss_encode_v1_msg() fails, we want to release the reference to the pipe_version that was obtained earlier in the function. Fixes: 9d3a2260f0f4b (SUNRPC: Fix buffer overflow checking in...) Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31ARM: 7941/2: Fix incorrect FDT initrd parameter overrideBen Peddell
commit 4c235cb9e35407bdb4a2debeef4dc8721e8f91f2 upstream. Commit 65939301acdb (arm: set initrd_start/initrd_end for fdt scan) caused the FDT initrd_start and initrd_end to override the phys_initrd_start and phys_initrd_size set by the initrd= kernel parameter. With this patch initrd_start and initrd_end will be overridden if phys_initrd_start and phys_initrd_size are set by the kernel initrd= parameter. Fixes: 65939301acdb (arm: set initrd_start/initrd_end for fdt scan) Signed-off-by: Ben Peddell <klightspeed@killerwolves.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31sfc: Use the correct maximum TX DMA ring size for SFC9100Ben Hutchings
commit d9317aea16ecec7694271ef11fb7791a0f0d9cc5 upstream. As part of a workaround for a hardware erratum in the SFC9100 family (SF bug 35388), the TX_DESC_UPD_DWORD register address is also used for communicating with the event block, and only descriptor pointer values < 2048 are valid. If the TX DMA ring size is increased to 4096 descriptors (which the firmware still allows) then we may write a descriptor pointer value >= 2048, which has entirely different and undesirable effects! Limit the TX DMA ring size correctly when this workaround is in effect. Fixes: 8127d661e77f ('sfc: Add support for Solarflare SFC9100 family') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31stop_machine: Fix^2 race between stop_two_cpus() and stop_cpus()Peter Zijlstra
commit 177c53d943368fc97644ebc0a250dc8e2d124250 upstream. We must use smp_call_function_single(.wait=1) for the irq_cpu_stop_queue_work() to ensure the queueing is actually done under stop_cpus_lock. Without this we could have dropped the lock by the time we do the queueing and get the race we tried to fix. Fixes: 7053ea1a34fa ("stop_machine: Fix race between stop_two_cpus() and stop_cpus()") Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20140228123905.GK3104@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31ASoC: max98090: make REVISION_ID readableStephen Warren
commit e126a646f77fdd66978785cb0a3a5e46b07aee2e upstream. The REVISION_ID register is not currently marked readable. snd_soc_read() refuses to read the register, and hence probe() fails. Fixes: d4807ad2c4c0 ("regmap: Check readable regs in _regmap_read") [exposed the bug, by checking for readability] Fixes: 685e42154dcf ("ASoC: Replace max98090 Device Driver") [left out this register from the readable list] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31libceph: resend all writes after the osdmap loses the full flagJosh Durgin
commit 9a1ea2dbff11547a8e664f143c1ffefc586a577a upstream. With the current full handling, there is a race between osds and clients getting the first map marked full. If the osd wins, it will return -ENOSPC to any writes, but the client may already have writes in flight. This results in the client getting the error and propagating it up the stack. For rbd, the block layer turns this into EIO, which can cause corruption in filesystems above it. To avoid this race, osds are being changed to drop writes that came from clients with an osdmap older than the last osdmap marked full. In order for this to work, clients must resend all writes after they encounter a full -> not full transition in the osdmap. osds will wait for an updated map instead of processing a request from a client with a newer map, so resent writes will not be dropped by the osd unless there is another not full -> full transition. This approach requires both osds and clients to be fixed to avoid the race. Old clients talking to osds with this fix may hang instead of returning EIO and potentially corrupting an fs. New clients talking to old osds have the same behavior as before if they encounter this race. Fixes: http://tracker.ceph.com/issues/6938 Reviewed-by: Sage Weil <sage@inktank.com> Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31libceph: block I/O when PAUSE or FULL osd map flags are setJosh Durgin
commit d29adb34a94715174c88ca93e8aba955850c9bde upstream. The PAUSEWR and PAUSERD flags are meant to stop the cluster from processing writes and reads, respectively. The FULL flag is set when the cluster determines that it is out of space, and will no longer process writes. PAUSEWR and PAUSERD are purely client-side settings already implemented in userspace clients. The osd does nothing special with these flags. When the FULL flag is set, however, the osd responds to all writes with -ENOSPC. For cephfs, this makes sense, but for rbd the block layer translates this into EIO. If a cluster goes from full to non-full quickly, a filesystem on top of rbd will not behave well, since some writes succeed while others get EIO. Fix this by blocking any writes when the FULL flag is set in the osd client. This is the same strategy used by userspace, so apply it by default. A follow-on patch makes this configurable. __map_request() is called to re-target osd requests in case the available osds changed. Add a paused field to a ceph_osd_request, and set it whenever an appropriate osd map flag is set. Avoid queueing paused requests in __map_request(), but force them to be resent if they become unpaused. Also subscribe to the next osd map from the monitor if any of these flags are set, so paused requests can be unblocked as soon as possible. Fixes: http://tracker.ceph.com/issues/6079 Reviewed-by: Sage Weil <sage@inktank.com> Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31media: cx18: check for allocation failure in cx18_read_eeprom()Dan Carpenter
commit e351bf25fa373a3de0be2141b962c5c3c27006a2 upstream. It upsets static checkers when we don't check for allocation failure. I moved the memset() of "tv" earlier so we don't use uninitialized data on error. Fixes: 1d212cf0c2d8 ('[media] cx18: struct i2c_client is too big for stack') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31media: dw2102: some missing unlocks on errorDan Carpenter
commit 324ed533bf0b23c309b805272c4ffcc5d51493a6 upstream. We recently introduced some new error paths but the unlocks are missing. Fixes: 0065a79a8698 ('[media] dw2102: Don't use dynamic static allocation') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31media: cxusb: unlock on error in cxusb_i2c_xfer()Dan Carpenter
commit 1cdbcc5db4e6d51ce9bb1313195167cada9aa6e9 upstream. We recently introduced some new error paths which are missing their unlocks. Fixes: 64f7ef8afbf8 ('[media] cxusb: Don't use dynamic static allocation') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31NFSv4: Use the correct net namespace in nfs4_update_serverTrond Myklebust
commit 292f503cade2b1d966239ef56a851e6897d1ba92 upstream. We need to use the same net namespace that was used to resolve the hostname and sockaddr arguments. Fixes: 32e62b7c3ef09 (NFS: Add nfs4_update_server) Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31net: davinci_emac: Replace devm_request_irq with request_irqChristian Riesch
commit 33b7107f59a61236d94ecd6b45e20283cd5abcc8 upstream. In commit 6892b41d9701283085b655c6086fb57a5d63fa47 Author: Lad, Prabhakar <prabhakar.csengg@gmail.com> Date: Tue Jun 25 21:24:51 2013 +0530 net: davinci: emac: Convert to devm_* api the call of request_irq is replaced by devm_request_irq and the call of free_irq is removed. But since interrupts are requested in emac_dev_open, doing ifconfig up/down on the board requests the interrupts again each time, causing devm_request_irq to fail. The interface is dead until the device is rebooted. This patch reverts said commit partially: It changes the driver back to use request_irq instead of devm_request_irq, puts free_irq back in place, but keeps the remaining changes of the original patch. Reported-by: Jon Ringle <jon@ringle.org> Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31partly revert commit 8a10bc9: parisc/sti_console: prefer Linux fonts over ↵Helge Deller
built-in ROM fonts commit a2fb4d782c61f77480e586578eeb4dfd27d134ea upstream. STI console is used on parisc and m68k HP machines. This patch partly reverts my previous commit and as such restores the fonts for the m68k machines. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31tracing: Fix array size mismatch in format stringVaibhav Nagarnaik
commit 87291347c49dc40aa339f587b209618201c2e527 upstream. In event format strings, the array size is reported in two locations. One in array subscript and then via the "size:" attribute. The values reported there have a mismatch. For e.g., in sched:sched_switch the prev_comm and next_comm character arrays have subscript values as [32] where as the actual field size is 16. name: sched_switch ID: 301 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1;signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[32]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[32]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; After bisection, the following commit was blamed: 92edca0 tracing: Use direct field, type and system names This commit removes the duplication of strings for field->name and field->type assuming that all the strings passed in __trace_define_field() are immutable. This is not true for arrays, where the type string is created in event_storage variable and field->type for all array fields points to event_storage. Use __stringify() to create a string constant for the type string. Also, get rid of event_storage and event_storage_mutex that are not needed anymore. also, an added benefit is that this reduces the overhead of events a bit more: text data bss dec hex filename 8424787 2036472 1302528 11763787 b3804b vmlinux 8420814 2036408 1302528 11759750 b37086 vmlinux.patched Link: http://lkml.kernel.org/r/1392349908-29685-1-git-send-email-vnagarnaik@google.com Cc: Laurent Chavey <chavey@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31drm/i915: Disable stolen memory when DMAR is activeChris Wilson
commit 0f4706d2740f2a221cd502922b22e522009041d9 upstream. We have reports of heavy screen corruption if we try to use the stolen memory reserved by the BIOS whilst the DMA-Remapper is active. This quirk may be only specific to a few machines or BIOSes, but first lets apply the big hammer and always disable use of stolen memory when DMAR is active. v2 by Jani: Rebase on -fixes, only look at intel_iommu_gfx_mapped. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68535 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31drm/i915: Don't enable display error interrupts from the startDaniel Vetter
commit 5c673b60a9b3b23486f4eda75c72e91d31d26a2b upstream. We need to enable interrupt processing before all the modeset state is set up. But that means we can fall over when we get a pipe underrun. This shouldn't happen as long as the bios works correctly but as usual this turns out to be wishful thinking. So disable error interrupts at irq install time and rely on the re-enabling code in the modeset functions to take care of this. Note that due to the SDE interrupt handling race we must uncondtionally enable all interrupt sources in SDEIER, hence no need to enable the SERR bit specifically. On gmch platforms we don't have an explicit enable/mask bit for fifo underruns. Fixing this up would require a bit of software tracking, hence is material for a separate patch. To make this possible we need to switch all gmch platforms to the new pipestat interrupt handling scheme Imre implemented for vlv, and then also add a safe form of sw state checking to __cpu_fifo_underrun_reporting_enabled a bit. v2: Also handle the ilk/snb cpu fifo underrun bits accordingly. Spotted by Ville. v3: Also handle the south interrupt underrun bits on ibx. Again spotted by Ville. Reported-by: Rob Clark <robdclark@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31drm/i915: Fix PSR programmingBen Widawsky
commit 24bd9bf54d45d28089251cdf62bf14323d1aa827 upstream. | has a higher precedence than ?. Therefore, the calculation doesn't do at all what you would expect. Thanks to Ken for convincing me that this was indeed the issue. Send me back to C programmer school, please. I'm sort of surprised PSR was continuing to work for people. It should be broken IMO (and it was broken for me, but I had assumed it never worked). Regression from: commit ed8546ac1f99b850879f07b1e9b06b42fb0a36d9 Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Mon Nov 4 22:45:05 2013 -0800 drm/i915/bdw: Support eDP PSR Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Cc: Kenneth Graunke <kenneth.w.graunke@intel.com> Cc: Art Runyan <arthur.j.runyan@intel.com> Reported-by: "Kumar, Kiran S" <kiran.s.kumar@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31clocksource: vf_pit_timer: use complement for sched_clock readingStefan Agner
commit 224aa3ed45c8735ae02bb2ecca002409fa6aa772 upstream. Vybrids PIT register is monitonic decreasing. However, sched_clock reading needs to be monitonic increasing. Use bitwise not to get the complement of the clock register. This fixes the clock going backward. Also, the clock now starts at 0 since we load the register with the maximum value at start. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: daniel.lezcano@linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux@arm.linux.org.uk Link: http://lkml.kernel.org/r/d25af915993aec1b486be653eb86f748ddef54fe.1394057313.git.stefan@agner.ch Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31ALSA: compress: Pass through return value of open ops callbackCharles Keepax
commit 749d32237bf39e6576dd95bfdf24e4378e51716c upstream. The snd_compr_open function would always return 0 even if the compressed ops open function failed, obviously this is incorrect. Looks like this was introduced by a small typo in: commit a0830dbd4e42b38aefdf3fb61ba5019a1a99ea85 ALSA: Add a reference counter to card instance This patch returns the value from the compressed op as it should. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31HID: hidraw: fix warning destroying hidraw device files after parentFernando Luis Vazquez Cao
commit 47587fc098451c2100dc1fb618855fc2e2d937af upstream. I noticed that after hot unplugging a Logitech unifying receiver (drivers/hid/hid-logitech-dj.c) the kernel would occasionally spew a stack trace similar to this: usb 1-1.1.2: USB disconnect, device number 7 WARNING: CPU: 0 PID: 2865 at fs/sysfs/group.c:216 device_del+0x40/0x1b0() sysfs group ffffffff8187fa20 not found for kobject 'hidraw0' [...] CPU: 0 PID: 2865 Comm: upowerd Tainted: G W 3.14.0-rc4 #7 Hardware name: LENOVO 7783PN4/ , BIOS 9HKT43AUS 07/11/2011 0000000000000009 ffffffff814cd684 ffff880427ccfdf8 ffffffff810616e7 ffff88041ec61800 ffff880427ccfe48 ffff88041e444d80 ffff880426fab8e8 ffff880429359960 ffffffff8106174c ffffffff81714b98 0000000000000028 Call Trace: [<ffffffff814cd684>] ? dump_stack+0x41/0x51 [<ffffffff810616e7>] ? warn_slowpath_common+0x77/0x90 [<ffffffff8106174c>] ? warn_slowpath_fmt+0x4c/0x50 [<ffffffff81374fd0>] ? device_del+0x40/0x1b0 [<ffffffff8137516f>] ? device_unregister+0x2f/0x50 [<ffffffff813751fa>] ? device_destroy+0x3a/0x40 [<ffffffffa03ca245>] ? drop_ref+0x55/0x120 [hid] [<ffffffffa03ca3e6>] ? hidraw_release+0x96/0xb0 [hid] [<ffffffff811929da>] ? __fput+0xca/0x210 [<ffffffff8107fe17>] ? task_work_run+0x97/0xd0 [<ffffffff810139a9>] ? do_notify_resume+0x69/0xa0 [<ffffffff814dbd22>] ? int_signal+0x12/0x17 ---[ end trace 63f4a46f6566d737 ]--- During device removal hid_disconnect() is called via hid_hw_stop() to stop the device and free all its resources, including the sysfs files. The problem is that if a user space process, such as upowerd, holds a reference to a hidraw file the corresponding sysfs files will be kept around (drop_ref() does not call device_destroy() if the open counter is not 0) and it will be usb_disconnect() who, by calling device_del() for the USB device, will indirectly remove the sysfs files of the hidraw device (sysfs_remove_dir() is recursive these days). Because of this, by the time user space releases the last reference to the hidraw file and drop_ref() tries to destroy the device the sysfs files are already gone and the kernel will print the warning above. Fix this by calling device_destroy() at USB disconnect time. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23Linux 3.13.7v3.13.7Greg Kroah-Hartman
2014-03-23PNP / ACPI: proper handling of ACPI IO/Memory resource parsing failuresZhang Rui
commit 89935315f192abf7068d0044cefc84f162c3c81f upstream. Before commit b355cee88e3b (ACPI / resources: ignore invalid ACPI device resources), if acpi_dev_resource_memory()/acpi_dev_resource_io() returns false, it means the the resource is not a memeory/IO resource. But after commit b355cee88e3b, those functions return false if the given memory/IO resource entry is invalid (the length of the resource is zero). This breaks pnpacpi_allocated_resource(), because it now recognizes the invalid memory/io resources as resources of unknown type. Thus users see confusing warning messages on machines with zero length ACPI memory/IO resources. Fix the problem by rearranging pnpacpi_allocated_resource() so that it calls acpi_dev_resource_memory() for memory type and IO type resources only, respectively. Fixes: b355cee88e3b (ACPI / resources: ignore invalid ACPI device resources) Signed-off-by: Zhang Rui <rui.zhang@intel.com> Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Reported-and-tested-by: Julian Wollrath <jwollrath@web.de> Reported-and-tested-by: Paul Bolle <pebolle@tiscali.nl> [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23memcg: reparent charges of children before processing parentFilipe Brandenburger
commit 4fb1a86fb5e4209a7d4426d4e586c58e9edc74ac upstream. Sometimes the cleanup after memcg hierarchy testing gets stuck in mem_cgroup_reparent_charges(), unable to bring non-kmem usage down to 0. There may turn out to be several causes, but a major cause is this: the workitem to offline parent can get run before workitem to offline child; parent's mem_cgroup_reparent_charges() circles around waiting for the child's pages to be reparented to its lrus, but it's holding cgroup_mutex which prevents the child from reaching its mem_cgroup_reparent_charges(). Further testing showed that an ordered workqueue for cgroup_destroy_wq is not always good enough: percpu_ref_kill_and_confirm's call_rcu_sched stage on the way can mess up the order before reaching the workqueue. Instead, when offlining a memcg, call mem_cgroup_reparent_charges() on all its children (and grandchildren, in the correct order) to have their charges reparented first. Fixes: e5fca243abae ("cgroup: use a dedicated workqueue for cgroup destruction") Signed-off-by: Filipe Brandenburger <filbranden@google.com> Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Tejun Heo <tj@kernel.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> [v3.10+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-04-06 09:35:53 +0000