summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-11ah: reload pointers to skb data after calling skb_cow_data()Dang Hongwu
skb_cow_data() may allocate a new data buffer, so pointers on skb should be set after this function. Bug was introduced by commit dff3bb06 ("ah4: convert to ahash") and 8631e9bd ("ah6: convert to ahash"). Signed-off-by: Wang Xuefu <xuefu.wang@6wind.com> Acked-by: Krzysztof Witek <krzysztof.witek@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11ah: update maximum truncated ICV lengthNicolas Dichtel
For SHA256, RFC4868 requires to truncate ICV length to 128 bits, hence MAX_AH_AUTH_LEN should be updated to 16. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11xfrm: check trunc_len in XFRMA_ALG_AUTH_TRUNCNicolas Dichtel
Maximum trunc length is defined by MAX_AH_AUTH_LEN (in bytes) and need to be checked when this value is set (in bits) by the user. In ah4.c and ah6.c a BUG_ON() checks this condiftion. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11ehea: Increase the skb array usageBreno Leitao
Currently the skb array is not fully allocated, and the allocation is done as it's requested, which is not the expected way. This patch just allocate the full skb array at driver initialization. Also, this patch increases ehea version to 107. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11net/fec: remove config FEC2 as it's used nowhereShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11pcnet_cs: add new_idKen Kawasaki
pcnet_cs: add another ID of "corega Ether CF-TD" 10Base-T PCMCIA card. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11tcp: disallow bind() to reuse addr/portEric Dumazet
inet_csk_bind_conflict() logic currently disallows a bind() if it finds a friend socket (a socket bound on same address/port) satisfying a set of conditions : 1) Current (to be bound) socket doesnt have sk_reuse set OR 2) other socket doesnt have sk_reuse set OR 3) other socket is in LISTEN state We should add the CLOSE state in the 3) condition, in order to avoid two REUSEADDR sockets in CLOSE state with same local address/port, since this can deny further operations. Note : a prior patch tried to address the problem in a different (and buggy) way. (commit fda48a0d7a8412ced tcp: bind() fix when many ports are bound). Reported-by: Gaspar Chilingarov <gasparch@gmail.com> Reported-by: Daniel Baluta <daniel.baluta@gmail.com> Tested-by: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10net/r8169: Update the function of parsing firmwarehayeswang
Update rtl_phy_write_fw function. The new function could parse the complex firmware which is used by RTL8111E and later. The new firmware may read data and do some operations, not just do writing only. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10net: ppp: use {get,put}_unaligned_be{16,32}Changli Gao
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Reviewed-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10CAIF: Fix IPv6 support in receive path for GPRS/3GKumar Sanghvi
Checks version field of IP in the receive path for GPRS/3G data and appropriately sets the value of skb->protocol. Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10arp: allow to invalidate specific ARP entriesMaxim Levitsky
IPv4 over firewire needs to be able to remove ARP entries from the ARP cache that belong to nodes that are removed, because IPv4 over firewire uses ARP packets for private information about nodes. This information becomes invalid as soon as node drops off the bus and when it reconnects, its only possible to start talking to it after it responded to an ARP packet. But ARP cache prevents such packets from being sent. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10net_sched: factorize qdisc stats handlingEric Dumazet
HTB takes into account skb is segmented in stats updates. Generalize this to all schedulers. They should use qdisc_bstats_update() helper instead of manipulating bstats.bytes and bstats.packets Add bstats_update() helper too for classes that use gnet_stats_basic_packed fields. Note : Right now, TCQ_F_CAN_BYPASS shortcurt can be taken only if no stab is setup on qdisc. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10mlx4: Call alloc_etherdev to allocate RX and TX queuesTom Herbert
Changed driver to call alloc_etherdev_mqs so that the number of TX and RX queues can be set to correct values in the netdev device. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10net: Add alloc_netdev_mqs functionTom Herbert
Added alloc_netdev_mqs function which allows the number of transmit and receive queues to be specified independenty. alloc_netdev_mq was changed to a macro to call the new function. Also added alloc_etherdev_mqs with same purpose. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10caif: don't set connection request param size before copying dataDan Rosenberg
The size field should not be set until after the data is successfully copied in. Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10cxgb4vf: fix mailbox data/control coherency domain raceCasey Leedom
For the VFs, the Mailbox Data "registers" are actually backed by T4's "MA" interface rather than PL Registers (as is the case for the PFs). Because these are in different coherency domains, the write to the VF's PL-register-backed Mailbox Control can race in front of the writes to the MA-backed VF Mailbox Data "registers". So we need to do a read-back on at least one byte of the VF Mailbox Data registers before doing the write to the VF Mailbox Control register. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10qlcnic: change module parameter permissionsamit salecha
o Updating module parameter after driver load is not supported except auto_fw_reset parameter. Changing these parameter after driver load, can have weird result. o Update driver version to 5.0.15. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10qlcnic: fix ethtool diagnostics testSony Chacko
IRQ diag test was getting executed only when both register test and link test passed. The test should get executed if ETH_TEST_FL_OFFLINE flag is set. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10qlcnic: fix flash fw version readamit salecha
Driver is reading flash fw version from defined address, this address may be invalid. Indeed Driver should read address for fw version through flash layout table. Flash layout table has defined region and address for fw version address should be read from fw image region. Driver has check for old firmware, this bug can cause driver load fail. This patch will try to read fw version from flash image region, if that fails, read from defined address. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10phonet: some signedness bugsDan Carpenter
Dan Rosenberg pointed out that there were some signed comparison bugs in the phonet protocol. http://marc.info/?l=full-disclosure&m=129424528425330&w=2 The problem is that we check for array overflows but "protocol" is signed and we don't check for array underflows. If you have already have CAP_SYS_ADMIN then you could use the bugs to get root, or someone could cause an oops by mistake. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10netdev: bfin_mac: let boards set vlan masksMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10netdev: bfin_mac: disable hardware checksum if writeback cache is enabledSonic Zhang
With writeback caches, corrupted RX packets will be sent up the stack without any error markings. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10netdev: bfin_mac: drop unused Mac dataMike Frysinger
We don't use this local "Mac" data anywhere (since we rely on the netdev's storage), so punt it. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10netdev: bfin_mac: mark setup_system_regs as staticMike Frysinger
No need for this to be exported since it is only used in this driver. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10netdev: bfin_mac: clean up printk messagesMike Frysinger
Use netdev_* and pr_* helper funcs for output rather than printk. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09ixgbe: update ntuple filter configurationAlexander Duyck
This change fixes several issues found in ntuple filtering while I was doing the ATR refactor. Specifically I updated the masks to work correctly with the latest version of ethtool, I cleaned up the exception handling and added detailed error output when a filter is rejected, and corrected several bits that were set incorrectly in ixgbe_type.h. The previous version of this patch included a printk that was left over from me fixing the filter setup. This patch does not include that printk. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09ixgbe: further flow director performance optimizationsAlexander Duyck
This change adds a compressed input type for atr signature hash computation. It also drops the use of the set functions when setting up the ATR input since we can then directly setup the hash input as two dwords that can be stored and passed as registers. With these changes the cost of computing the has is low enough that we can perform a hash computation on each TCP SYN flagged packet allowing us to drop the number of flow director misses considerably in tests such as netperf TCP_CRR. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09ixgbe: cleanup flow director hash computation to improve performanceAlexander Duyck
This change cleans up the layout of the flow director data, and the algorithm used to calculate the hash resulting in a 35x / 3500% performance increase versus the old flow director hash computation. The overall effect is only a 1% increase in transactions per second though due to the fact that only 1 packet in 20 are actually hashed upon. TCP_RR before: Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 60.00 23059.27 16384 87380 TCP_RR after: Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 60.00 23239.98 16384 87380 Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09ixgbe: make sure per Rx queue is disabled before unmapping the receive bufferYi Zou
When disable the Rx logic globally, we would also want to disable the per Rx queue receive logic by per queue Rx control register RXDCTL so no more DMA is happening from the packet buffer to the receive buffer associated with the Rx ring, before we start unmapping Rx ring receive buffer. The hardware may take max of 100us before the corresponding Rx queue is really disabled. Added ixgbe_disable_rx_queue() for this purpose. Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000: Add support for the CE4100 reference platformDirk Brandewie
This patch adds support for the gigabit phys present on the CE4100 reference platforms. Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000e: add custom set_d[0|3]_lplu_state function pointer for 82574Bruce Allan
82574 needs to configure Low Power Link Up (or LPLU) differently than the other parts in the 8257x family supported by the driver. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000e: power off PHY after reset when interface is downBruce Allan
Some Phys supported by the driver do not remain powered off across a reset of the device when the interface is down, e.g. on 82571, but not on 82574. This patch powers down (only when WoL is disabled) the PHY after a reset if the interface is down and the ethtool diagnostics are not currently running. The ethtool diagnostic function required a minor re-factor as a result, and the e1000_[get|put]_hw_control() functions are renamed since they are no longer static to netdev.c as they are needed by the ethtool diagnostics. A couple minor whitespace issues were cleaned up, too. Reported-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000e: use either_crc_le() rather than re-write itBruce Allan
For the 82579 jumbo frame workaround, there is no need to re-write the CRC calculation functionality already found in the kernel's ether_crc_le(). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000e: properly bounds-check string functionsBruce Allan
Use string functions with bounds checking rather than their non-bounds checking counterparts, and do not hard code these boundaries. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000e: convert calls of ops.[read|write]_reg to e1e_[r|w]phyBruce Allan
Cleans up the code a bit by using the driver-specific e1e_rphy and e1e_wphy macros instead of the full function pointer variants. Fix a couple whitespace issue with two already existing calls to e1e_wphy. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09e1000e: cleanup variables set but not usedBruce Allan
The ICR register is clear on read and we don't care what the returned value is when resetting the hardware so the icr variable(s) can be removed. We should not ignore the return from e1000_lv_jumbo_workaround_ich8lan() and from e1000_get_phy_id_82571() (dump a debug message when it fails and when an unknown Phy id is returned). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net offloading: Convert checksums to use centrally computed features.Jesse Gross
In order to compute the features for other offloads (primarily scatter/gather), we need to first check the ability of the NIC to offload the checksum for the packet. Since we have already computed this, we can directly use the result instead of figuring it out again. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net offloading: Convert skb_need_linearize() to use precomputed features.Jesse Gross
This switches skb_need_linearize() to use the features that have been centrally computed. In doing so, this fixes a problem where scatter/gather should not be used because the card does not support checksum offloading on that type of packet. On device registration we only check that some form of checksum offloading is available if scatter/gatther is enabled but we must also check at transmission time. Examples of this include IPv6 or vlan packets on a NIC that only supports IPv4 offloading. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net offloading: Convert dev_gso_segment() to use precomputed features.Jesse Gross
This switches dev_gso_segment() to use the device features computed by the centralized routine. In doing so, it fixes a problem where it would always use dev->features, instead of those appropriate to the number of vlan tags if any are present. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net offloading: Pass features into netif_needs_gso().Jesse Gross
Now that there is a single function that can compute the device features relevant to a packet, we don't want to run it for each offload. This converts netif_needs_gso() to take the features of the device, rather than computing them itself. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net offloading: Generalize netif_get_vlan_features().Jesse Gross
netif_get_vlan_features() is currently only used by netif_needs_gso(), so it only concerns itself with GSO features. However, several other places also should take into account the contents of the packet when deciding whether to offload to hardware. This generalizes the function to return features about all of the various forms of offloading. Since offloads tend to be linked together, this avoids duplicating the logic in each location (i.e. the scatter/gather code also needs the checksum logic). Suggested-by: Michał Mirosław <mirqus@gmail.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net offloading: Accept NETIF_F_HW_CSUM for all protocols.Jesse Gross
We currently only have software fallback for one type of checksum: the TCP/UDP one's complement. This means that a protocol that uses hardware offloading for a different type of checksum (FCoE, SCTP) must directly check the device's features and do the right thing ahead of time. By the time we get to dev_can_checksum(), we're only deciding whether to apply the one algorithm in software or hardware. NETIF_F_HW_CSUM has the same capabilities as the software version, so we should always use it if present. The primary advantage of this is multiply tagged vlans can use hardware checksumming. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09r8169: delay phy init until device opens.françois romieu
It workarounds the 60s firmware load failure timeout for the non-modular case. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net: fix kernel-doc warning in core/filter.cRandy Dunlap
Fix new kernel-doc notation warning in net/core/filter.c: Warning(net/core/filter.c:172): No description found for parameter 'fentry' Warning(net/core/filter.c:172): Excess function parameter 'filter' description in 'sk_run_filter' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09net/sock.h: make some fields private to fix kernel-doc warning(s)Randy Dunlap
Fix new kernel-doc notation warning in sock.h by annotating skc_dontcopy_* as private fields. Warning(include/net/sock.h:163): No description found for parameter 'skc_dontcopy_end[0]' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09netlink: test for all flags of the NLM_F_DUMP compositeJan Engelhardt
Due to NLM_F_DUMP is composed of two bits, NLM_F_ROOT | NLM_F_MATCH, when doing "if (x & NLM_F_DUMP)", it tests for _either_ of the bits being set. Because NLM_F_MATCH's value overlaps with NLM_F_EXCL, non-dump requests with NLM_F_EXCL set are mistaken as dump requests. Substitute the condition to test for _all_ bits being set. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09forcedeth: Do not use legacy PCI power managementRafael J. Wysocki
The forcedeth driver uses the legacy PCI power management, so it has to do PCI-specific things in its ->suspend() and ->resume() callbacks and some of them are not done correctly. Convert forcedeth to the new PCI power management framework and make it let the PCI subsystem take care of all the PCI-specific aspects of device handling during system power transitions. Tested with nVidia Corporation MCP55 Ethernet (rev a2). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09Merge branch 'dccp' of git://eden-feed.erg.abdn.ac.uk/net-next-2.6David S. Miller
2011-01-09sky2: convert to new VLAN model (v0.2)Stephen Hemminger
This converts sky2 to new VLAN offload flags control via ethtool. It also allows for transmit offload of vlan tagged frames which was not possible before. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09sky2: fix limited auto negotiationStephen Hemminger
The sky2 driver would always try all possible supported speeds even if the user only asked for a limited set of speed/duplex combinations. Reported-by: Mohsen Hariri <m.hariri@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2025-02-08 12:28:42 +0000