summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-08-13x86: don't send SIGBUS for kernel page faultsLinus Torvalds
commit 96054569190bdec375fe824e48ca1f4e3b53dd36 upstream. It's wrong for several reasons, but the most direct one is that the fault may be for the stack accesses to set up a previous SIGBUS. When we have a kernel exception, the kernel exception handler does all the fixups, not some user-level signal handler. Even apart from the nested SIGBUS issue, it's also wrong to give out kernel fault addresses in the signal handler info block, or to send a SIGBUS when a system call already returns EFAULT. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13mm: fix missing page table unmap for stack guard page failure caseLinus Torvalds
commit 5528f9132cf65d4d892bcbc5684c61e7822b21e9 upstream. .. which didn't show up in my tests because it's a no-op on x86-64 and most other architectures. But we enter the function with the last-level page table mapped, and should unmap it at exit. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13mm: keep a guard page below a grow-down stack segmentLinus Torvalds
commit 320b2b8de12698082609ebbc1a17165727f4c893 upstream. This is a rather minimally invasive patch to solve the problem of the user stack growing into a memory mapped area below it. Whenever we fill the first page of the stack segment, expand the segment down by one page. Now, admittedly some odd application might _want_ the stack to grow down into the preceding memory mapping, and so we may at some point need to make this a process tunable (some people might also want to have more than a single page of guarding), but let's try the minimal approach first. Tested with trivial application that maps a single page just below the stack, and then starts recursing. Without this, we will get a SIGSEGV _after_ the stack has smashed the mapping. With this patch, we'll get a nice SIGBUS just as the stack touches the page just above the mapping. Requested-by: Keith Packard <keithp@keithp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13md/raid1: delay reads that could overtake behind-writes.NeilBrown
commit e555190d82c0f58e825e3cbd9e6ebe2e7ac713bd upstream. When a raid1 array is configured to support write-behind on some devices, it normally only reads from other devices. If all devices are write-behind (because the rest have failed) it is possible for a read request to be serviced before a behind-write request, which would appear as data corruption. So when forced to read from a WriteMostly device, wait for any write-behind to complete, and don't start any more behind-writes. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13ibmvfc: Reduce error recovery timeoutBrian King
commit daa142d1773dd3a986f02a8a4da929608d24daaa upstream. If a command times out resulting in EH getting invoked, we wait for the aborted commands to come back after sending the abort. Shorten the amount of time we wait for these responses, to ensure we don't get stuck in EH for several minutes. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13ibmvfc: Fix command completion handlingBrian King
commit f5832fa2f8dc39adcf3ae348d2d6383163235e79 upstream. Commands which are completed by the VIOS are placed on a CRQ in kernel memory for the ibmvfc driver to process. Each CRQ entry is 16 bytes. The ibmvfc driver reads the first 8 bytes to check if the entry is valid, then reads the next 8 bytes to get the handle, which is a pointer the completed command. This fixes an issue seen on Power 7 where the processor reordered the loads from memory, resulting in processing command completion with a stale handle. This could result in command timeouts, and also early completion of commands. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13i915: fix ironlake edp panel setup (v4)Dave Airlie
commit fe27d53e5c597ee5ba5d72a29d517091f244e974 upstream. The eDP spec claims a 20% overhead for the 8:10 encoding scheme used on the wire. Take this into account when picking the lane/clock speed for the panel. v3: some panels are out of spec, try our best to deal with them, don't refuse modes on eDP panels, and try the largest allowed settings if all else fails on eDP. v4: fix stupid typo, forgot to git add before amending. Fixes several reports in bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=28070 Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net> Cc: Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13drm/i915: Use RSEN instead of HTPLG for tfp410 monitor detection.Dave Müller
commit f458823b864c6def488f951a79986fa205aba4f1 upstream. Presence detection of a digital monitor seems not to be reliable using the HTPLG bit. Dave Müller <dave.mueller@gmx.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13xen: Do not suspend IPI IRQs.Ian Campbell
commit 4877c737283813bdb4bebfa3168c1585f6e3a8ca upstream. In general the semantics of IPIs are that they are are expected to continue functioning after dpm_suspend_noirq(). Specifically I have seen a deadlock between the callfunc IPI and the stop machine used by xen's do_suspend() routine. If one CPU has already called dpm_suspend_noirq() then there is a window where it can be sent a callfunc IPI before all the other CPUs have entered stop_cpu(). If this happens then the first CPU ends up spinning in stop_cpu() waiting for the other to rendezvous in state STOPMACHINE_PREPARE while the other is spinning in csd_lock_wait(). Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: xen-devel@lists.xensource.com LKML-Reference: <1280398595-29708-4-git-send-email-ian.campbell@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13irq: Add new IRQ flag IRQF_NO_SUSPENDIan Campbell
commit 685fd0b4ea3f0f1d5385610b0d5b57775a8d5842 upstream. A small number of users of IRQF_TIMER are using it for the implied no suspend behaviour on interrupts which are not timer interrupts. Therefore add a new IRQF_NO_SUSPEND flag, rename IRQF_TIMER to __IRQF_TIMER and redefine IRQF_TIMER in terms of these new flags. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: xen-devel@lists.xensource.com Cc: linux-input@vger.kernel.org Cc: linuxppc-dev@ozlabs.org Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1280398595-29708-1-git-send-email-ian.campbell@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13net: Fix NETDEV_NOTIFY_PEERS to not conflict with NETDEV_BONDING_DESLAVE.David S. Miller
commit 38117d1495e587fbb10d6e55733139a27893cef5 upstream. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13xen: netfront: explicitly generate arp_notify event after migration.Ian Campbell
commit 592970675c9522bde588b945388c7995c8b51328 upstream. Use newly introduced netif_notify_peers() method to ensure a gratuitous ARP is generated after a migration. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: xen-devel@lists.xensource.com Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13arp_notify: allow drivers to explicitly request a notification event.Ian Campbell
commit 06c4648d46d1b757d6b9591a86810be79818b60c upstream. Currently such notifications are only generated when the device comes up or the address changes. However one use case for these notifications is to enable faster network recovery after a virtual machine migration (by causing switches to relearn their MAC tables). A migration appears to the network stack as a temporary loss of carrier and therefore does not trigger either of the current conditions. Rather than adding carrier up as a trigger (which can cause issues when interfaces a flapping) simply add an interface which the driver can use to explicitly trigger the notification. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13jfs: don't allow os2 xattr namespace overlap with othersDave Kleikamp
commit aca0fa34bdaba39bfddddba8ca70dba4782e8fe6 upstream. It's currently possible to bypass xattr namespace access rules by prefixing valid xattr names with "os2.", since the os2 namespace stores extended attributes in a legacy format with no prefix. This patch adds checking to deny access to any valid namespace prefix following "os2.". Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Reported-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13mtd: gen_nand: fix support for multiple chipsMarek Vasut
commit 81cbb0b17796d81cbd92defe113cf2a7c7a21fbb upstream. This patch corrects a problem where gen_nand driver assumed there can be only one chip and ignored the pdata->chip.nr_chips value. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13Bluetooth: Added support for controller shipped with iMac i5Cyril Lacoux
commit 0a79f67445de50ca0a8dc1d34f3cc406d89c28b2 upstream. Device class is ff(vend.) instead of e0(wlcon). Output from command `usb-devices`: T: Bus=01 Lev=03 Prnt=03 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=8215 Rev=01.82 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller S: SerialNumber=7C6D62936607 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none) Signed-off-by: Cyril Lacoux <clacoux@ifeelgood.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13drm/edid: Fix the HDTV hack sync adjustmentAdam Jackson
commit a4967de6cbb260ad0f6612a1d2035e119ef1578f upstream. We're adjusting horizontal timings only here, moving vsync was just a slavish translation of a typo in the X server. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: fix thread-unsafe anchor utiliy routinesChristian Lamparter
commit b3e670443b7fb8a2d29831b62b44a039c283e351 upstream. This patch fixes a race condition in two utility routines related to the removal/unlinking of urbs from an anchor. If two threads are concurrently accessing the same anchor, both could end up with the same urb - thinking they are the exclusive owner. Alan Stern pointed out a related issue in usb_unlink_anchored_urbs: "The URB isn't removed from the anchor until it completes (as a by-product of completion, in fact), which might not be for quite some time after the unlink call returns. In the meantime, the subroutine will keep trying to unlink it, over and over again." Cc: Oliver Neukum <oneukum@suse.de> Cc: Greg Kroah-Hartman <greg@kroah.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: usbtest: avoid to free coherent buffer in atomic contextMing Lei
commit e10e1bec8e6654de4591ef45ddd6a6d1e5b2591c upstream. This patch fixes the warning below: [30753.755998] ------------[ cut here ]------------ [30753.755998] WARNING: at /home/tom/git/linux-2.6/linux-2.6-next/arch/x86/include/asm/dma-mapping.h:155 hcd_buffer_free+0xb1/0xd4 [usbcore]() [30753.755998] Hardware name: 6475EK2 [30753.755998] Modules linked in: uvcvideo ehci_hcd usbtest cdc_ether usbnet vfat fat usb_storage nfsd lockd nfs_acl auth_rpcgss exportfs mii tun videodev v4l1_compat v4l2_compat_ioctl32 fuse bridge stp llc sunrpc ipv6 cpufreq_ondemand acpi_cpufreq freq_table mperf kvm_intel kvm arc4 ecb ath5k usbhid mac80211 snd_hda_codec_conexant ch341 usbserial ath cfg80211 thinkpad_acpi snd_hda_intel pcspkr wmi hwmon yenta_socket iTCO_wdt iTCO_vendor_support i2c_i801 e1000e snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore snd_page_alloc pata_acpi uhci_hcd ohci_hcd usbcore i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: uvcvideo] [30753.755998] Pid: 0, comm: swapper Tainted: G W 2.6.35-rc6-gkh-wl+ #49 [30753.755998] Call Trace: [30753.755998] <IRQ> [<ffffffff8104478a>] warn_slowpath_common+0x80/0x98 [30753.755998] [<ffffffff810447b7>] warn_slowpath_null+0x15/0x17 [30753.755998] [<ffffffffa00ce02d>] hcd_buffer_free+0xb1/0xd4 [usbcore] [30753.755998] [<ffffffffa00c1345>] usb_free_coherent+0x1c/0x1e [usbcore] [30753.755998] [<ffffffffa00b13e4>] simple_free_urb+0x23/0x2f [usbtest] [30753.755998] [<ffffffffa00b210b>] iso_callback+0xbb/0x10f [usbtest] [30753.755998] [<ffffffffa00c7390>] usb_hcd_giveback_urb+0x8c/0xc0 [usbcore] [30753.755998] [<ffffffffa0449b35>] ehci_urb_done+0x84/0x95 [ehci_hcd] [30753.755998] [<ffffffffa044b5a5>] ehci_work+0x41a/0x7dd [ehci_hcd] [30753.755998] [<ffffffffa044e298>] ehci_irq+0x33b/0x370 [ehci_hcd] [30753.755998] [<ffffffff8100fb05>] ? sched_clock+0x9/0xd [30753.755998] [<ffffffff8105e641>] ? sched_clock_local+0x1c/0x82 [30753.755998] [<ffffffff8105e76a>] ? sched_clock_cpu+0xc3/0xce [30753.755998] [<ffffffff81067c7e>] ? trace_hardirqs_off+0xd/0xf [30753.755998] [<ffffffff8105e7b8>] ? cpu_clock+0x43/0x5e [30753.755998] [<ffffffffa00c6999>] usb_hcd_irq+0x45/0xa1 [usbcore] [30753.755998] [<ffffffff81092e02>] handle_IRQ_event+0x20/0xa5 [30753.755998] [<ffffffff81094cea>] handle_fasteoi_irq+0x92/0xd2 [30753.755998] [<ffffffff8100c0ed>] handle_irq+0x1f/0x2a [30753.755998] [<ffffffff8100b75d>] do_IRQ+0x57/0xbe [30753.755998] [<ffffffff8136a693>] ret_from_intr+0x0/0x16 [30753.755998] <EOI> [<ffffffff81223baa>] ? acpi_idle_enter_bm+0x231/0x269 [30753.755998] [<ffffffff81223ba3>] ? acpi_idle_enter_bm+0x22a/0x269 [30753.755998] [<ffffffff812c4b6b>] cpuidle_idle_call+0x99/0xce [30753.755998] [<ffffffff81008dd5>] cpu_idle+0x61/0xaa [30753.755998] [<ffffffff8136374b>] start_secondary+0x1c2/0x1c6 [30753.755998] ---[ end trace 904cfaf7ab4cb1a2 ]--- Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: cp210x: Add four new device IDsAlessio Igor Bogani
commit 356c5a4834a74c621715f7a7f16ded914eecbd3c upstream. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: ftdi_sio: device id for Navitatordranch@trinnet.net
commit b6180ef7c99574c3350bbffa2a3a9d675321543d upstream. This patch is to add a US Interface, Inc. "Navigator" USB device. Specifically, it's a HAM Radio USB sound modem that also incorporates three pairs of unique FTDI serial ports. The standard Linux FTDI serial driver will only recognize the first two serial ports of an unknown FDTI derived device and this patch adds in recognition to these specific new IDs. Signed-off-by: David A. Ranch <dranch@trinnet.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: option: add huawei k3765 k4505 devices to work properlyAndrew Bird
commit 0372a754be9aa43e19fd86c9bc04796d43b55e38 upstream. This patch adds the product IDs of Huawei's K3765 and K4505 mobile broadband usb modems to option.c. It also adds a quirk to the option probe function so that binding to the device's network interface(class 0xff) is avoided. This is necessary to allow another driver to bind to that, and to avoid programs like wvdial opening a nonfunctioning tty during modem discovery. Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: option: Huawei ETS 1220 support addedPavel Kazlou
commit b972302b0a13aaddc9e90da2b4b52722e5d0e776 upstream. The patch adds Huawei ETS 1220 product id into the list of supported devices in 'option' usb serial driver. Signed-off-by: Pavel Kazlou <p.i.kazlou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: serial: enabling support for Segway RMP in ftdi_sioJohn G. Rogers
commit afad19648f70c6493193e0a774bd754b7790b4a0 upstream. I have added the ProductID=0xe729 VendorID=FTDI_VID=0x0403 which will enable support for the Segway Robotic Mobility Platform (RMP200) in the ftdi_sio kernel module. Currently, users of the Segway RMP200 must use a RUN+="/sbin/modprobe -q ftdi-sio product=0xe729 vendor=0x0403 in a udev rule to get the ftdi_sio module to handle the usb interface and mount it on /dev/ttyXXX. This is not a good solution because some users will have multiple USB to Serial converters which will use the ftdi_sio module. Signed-off-by: John Rogers <jgrogers@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB delay init quirk for logitech Harmony 700-series devicesPhil Dibowitz
commit 93362a875fc69881ae69299efaf19a55a1f57db0 upstream. The Logitech Harmony 700 series needs an extra delay during initialization. This patch adds a USB quirk which enables such a delay and adds the device to the quirks list. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: resizing usbmon binary interface buffer causes protection faultsSteven Robertson
commit 33d973ad88ceb83ed1449592b7574b5b5bb33ac6 upstream. Enlarging the buffer size via the MON_IOCT_RING_SIZE ioctl causes general protection faults. It appears the culprit is an incorrect argument to mon_free_buff: instead of passing the size of the current buffer being freed, the size of the new buffer is passed. Use the correct size argument to mon_free_buff when changing the size of the buffer. Signed-off-by: Steven Robertson <steven@strobe.cc> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: EHCI: remove PCI assumptionAlan Stern
commit ae68a83bdc1971cb02fefc7a686ba6d077065e71 upstream. This patch (as1405) fixes a small bug in ehci-hcd's isochronous scheduler. Not all EHCI controllers are PCI, and the code shouldn't assume that they are. Instead, introduce a special flag for controllers which need to delay iso scheduling for full-speed devices beyond the scheduling threshold. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: David Brownell <david-b@pacbell.net> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13ARM: 6280/1: imx: Fix build failure when including <mach/gpio.h> without ↵Uwe Kleine-König
<linux/spinlock.h> commit 868003ca7ad17ac6c1606dc36101f10a7825b399 upstream. This is a follow up to 14cb0de (arm/imx/gpio: add spinlock protection) and fixes the following build failure: CC arch/arm/mach-imx/pcm970-baseboard.o In file included from arch/arm/include/asm/gpio.h:6, from include/linux/gpio.h:8, from arch/arm/mach-imx/pcm970-baseboard.c:20: arch/arm/plat-mxc/include/mach/gpio.h:40: error: expected specifier-qualifier-list before 'spinlock_t' Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-13ARM: 6299/1: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a ↵Will Deacon
faulty ASID commit cdf357f1e13a08a11261edacb3083746f65c1ed9 upstream. On versions of the Cortex-A9 prior to r2p0, performing TLB invalidations by ASID match can result in the incorrect ASID being broadcast to other CPUs. As a consequence of this, the targetted TLB entries are not invalidated across the system. This workaround changes the TLB flushing routines to invalidate entries regardless of the ASID. Tested-by: Rob Clark <rob@ti.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13smsc911x: Add spinlocks around registers accessCatalin Marinas
commit 492c5d943d6a04b124ba3a719dc746dc36b14cfb upstream. On SMP systems, the SMSC911x registers may be accessed by multiple CPUs and this seems to put the chip in an inconsistent state. The patch adds spinlocks to the smsc911x_reg_read, smsc911x_reg_write, smsc911x_rx_readfifo and smsc911x_tx_writefifo functions. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13bio, fs: update RWA_MASK, READA and SWRITE to match the corresponding ↵Tejun Heo
BIO_RW_* bits commit aca27ba9618276dd2f777bcd5a1419589ccf1ca8 upstream. Commit a82afdf (block: use the same failfast bits for bio and request) moved BIO_RW_* bits around such that they match up with REQ_* bits. Unfortunately, fs.h hard coded RW_MASK, RWA_MASK, READ, WRITE, READA and SWRITE as 0, 1, 2 and 3, and expected them to match with BIO_RW_* bits. READ/WRITE didn't change but BIO_RW_AHEAD was moved to bit 4 instead of bit 1, breaking RWA_MASK, READA and SWRITE. This patch updates RWA_MASK, READA and SWRITE such that they match the BIO_RW_* bits again. A follow up patch will update the definitions to directly use BIO_RW_* bits so that this kind of breakage won't happen again. Neil also spotted missing RWA_MASK conversion. Stable: The offending commit a82afdf was released with v2.6.32, so this patch should be applied to all kernels since then but it must _NOT_ be applied to kernels earlier than that. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-bisected-by: Vladislav Bolkhovitin <vst@vlnb.net> Root-caused-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13signalfd: fill in ssi_int for posix timers and message queuesNathan Lynch
commit a2a20c412c86e0bb46a9ab0dd31bcfe6d201b913 upstream. If signalfd is used to consume a signal generated by a POSIX interval timer or POSIX message queue, the ssi_int field does not reflect the data (sigevent->sigev_value) supplied to timer_create(2) or mq_notify(3). (The ssi_ptr field, however, is filled in.) This behavior differs from signalfd's treatment of sigqueue-generated signals -- see the default case in signalfd_copyinfo. It also gives results that differ from the case when a signal is handled conventionally via a sigaction-registered handler. So, set signalfd_siginfo->ssi_int in the remaining cases (__SI_TIMER, __SI_MESGQ) where ssi_ptr is set. akpm: a non-back-compatible change. Merge into -stable to minimise the number of kernels which are in the field and which miss this feature. Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13pxa/cm-x300: fix ffuart registrationIgor Grinberg
commit a6cd7eb374647b572ae9e7dbfe49871e6996e8e0 upstream. ffuart is available on cm-x300 only with pxa300. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13fs/ecryptfs/file.c: introduce missing freeJulia Lawall
commit ceeab92971e8af05c1e81a4ff2c271124b55bb9b upstream. The comments in the code indicate that file_info should be released if the function fails. This releasing is done at the label out_free, not out. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = kmem_cache_zalloc(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return <+...x...+>; | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmem_cache_zalloc %s" % (p1[0].file,p1[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13ecryptfs: release reference to lower mount if interpose failsLino Sanfilippo
commit 31f73bee3e170b7cabb35db9e2f4bf7919b9d036 upstream. In ecryptfs_lookup_and_interpose_lower() the lower mount is not decremented if allocation of a dentry info struct failed. As a result the lower filesystem cant be unmounted any more (since it is considered busy). This patch corrects the reference counting. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13eCryptfs: Handle ioctl calls with unlocked and compat functionsTyler Hicks
commit c43f7b8fb03be8bcc579bfc4e6ab70eac887ab55 upstream. Lower filesystems that only implemented unlocked_ioctl weren't being passed ioctl calls because eCryptfs only checked for lower_file->f_op->ioctl and returned -ENOTTY if it was NULL. eCryptfs shouldn't implement ioctl(), since it doesn't require the BKL. This patch introduces ecryptfs_unlocked_ioctl() and ecryptfs_compat_ioctl(), which passes the calls on to the lower file system. https://bugs.launchpad.net/ecryptfs/+bug/469664 Reported-by: James Dupin <james.dupin@gmail.com> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13blkdev: cgroup whitelist permission fixChris Wright
commit b7300b78d1a87625975a799a109a2f98d77757c8 upstream. The cgroup device whitelist code gets confused when trying to grant permission to a disk partition that is not currently open. Part of blkdev_open() includes __blkdev_get() on the whole disk. Basically, the only ways to reliably allow a cgroup access to a partition on a block device when using the whitelist are to 1) also give it access to the whole block device or 2) make sure the partition is already open in a different context. The patch avoids the cgroup check for the whole disk case when opening a partition. Addresses https://bugzilla.redhat.com/show_bug.cgi?id=589662 Signed-off-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Serge E. Hallyn <serue@us.ibm.com> Tested-by: Serge E. Hallyn <serue@us.ibm.com> Reported-by: Vivek Goyal <vgoyal@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: "Daniel P. Berrange" <berrange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13md/raid10: fix deadlock with unaligned read during resyncNeilBrown
commit 51e9ac77035a3dfcb6fc0a88a0d80b6f99b5edb1 upstream. If the 'bio_split' path in raid10-read is used while resync/recovery is happening it is possible to deadlock. Fix this be elevating ->nr_waiting for the duration of both parts of the split request. This fixes a bug that has been present since 2.6.22 but has only started manifesting recently for unknown reasons. It is suitable for and -stable since then. Reported-by: Justin Bronder <jsbronder@gentoo.org> Tested-by: Justin Bronder <jsbronder@gentoo.org> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13ide-cd: Do not access completed requests in the irq handlerBorislav Petkov
commit 110712828365ccafcc61a7f4db44c31ed4cf8793 upstream. ide_cd_error_cmd() can complete an erroneous request with leftover buffers. Signal this with its return value so that the request is not accessed after its completion in the irq handler and we oops. Signed-off-by: Borislav Petkov <bp@alien8.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13iwlwifi: fix TX tracerJohannes Berg
commit e95b743536937a72e1560c85696b425c5d1a1c18 upstream. The TX tracing code copies with the wrong length, which will typically copy too little data. Fix this by using the correct length variable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13drivers/video/w100fb.c: ignore void return value / fix build failurePeter Huewe
commit fa260c00c1aa5c657793a7221e40d2400df5afd8 upstream. Fix a build failure "error: void value not ignored as it ought to be" by removing an assignment of a void return value. The functionality of the code is not changed. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13mm: fix corruption of hibernation caused by reusing swap during image savingKAMEZAWA Hiroyuki
commit 966cca029f739716fbcc8068b8c6dfe381f86fc3 upstream. Since 2.6.31, swap_map[]'s refcounting was changed to show that a used swap entry is just for swap-cache, can be reused. Then, while scanning free entry in swap_map[], a swap entry may be able to be reclaimed and reused. It was caused by commit c9e444103b5e7a5 ("mm: reuse unused swap entry if necessary"). But this caused deta corruption at resume. The scenario is - Assume a clean-swap cache, but mapped. - at hibernation_snapshot[], clean-swap-cache is saved as clean-swap-cache and swap_map[] is marked as SWAP_HAS_CACHE. - then, save_image() is called. And reuse SWAP_HAS_CACHE entry to save image, and break the contents. After resume: - the memory reclaim runs and finds clean-not-referenced-swap-cache and discards it because it's marked as clean. But here, the contents on disk and swap-cache is inconsistent. Hance memory is corrupted. This patch avoids the bug by not reclaiming swap-entry during hibernation. This is a quick fix for backporting. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Ondreg Zary <linux@rainbow-software.org> Tested-by: Ondreg Zary <linux@rainbow-software.org> Tested-by: Andrea Gelmini <andrea.gelmini@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13Char: nozomi, set tty->driver_data appropriatelyJiri Slaby
commit bf9c1fca9ae9a79ed209e7ab2c10b3862f3f6f72 upstream. Sorry, one more fix, this one depends on the other, so this is rather 2/2. -- tty->driver_data is used all over the code, but never set. This results in oopses like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000130 IP: [<ffffffff814a0040>] mutex_lock+0x10/0x40 ... Pid: 2157, comm: modem-manager Not tainted 2.6.34.1-0.1-desktop #1 2768DR7/2768DR7 RIP: 0010:[<ffffffff814a0040>] [<ffffffff814a0040>] mutex_lock+0x10/0x40 RSP: 0018:ffff88007b16fa50 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000130 RCX: 0000000000000003 RDX: 0000000000000003 RSI: 0000000000000286 RDI: 0000000000000130 RBP: 0000000000001000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000130 R13: 0000000000000001 R14: 0000000000000000 R15: ffff88007b16feb4 ... Call Trace: [<ffffffffa077690d>] ntty_write_room+0x4d/0x90 [nozomi] ... Set tty->driver_data to the computed port in .install to not recompute it in every place where needed. Switch .open to use driver_data too. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13Char: nozomi, fix tty->count countingJiri Slaby
commit ee78bb95b7bea08b7774a02073ea2bb45611a9e1 upstream. Currently ntty_install omits to increment tty count and we get the following warnings: Warning: dev (noz2) tty->count(0) != #fd's(1) in tty_open So to fix that, add one tty->count++ there. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13splice: fix misuse of SPLICE_F_NONBLOCKMiklos Szeredi
commit 6965031d331a642e31278fa1b5bd47f372ffdd5d upstream. SPLICE_F_NONBLOCK is clearly documented to only affect blocking on the pipe. In __generic_file_splice_read(), however, it causes an EAGAIN if the page is currently being read. This makes it impossible to write an application that only wants failure if the pipe is full. For example if the same process is handling both ends of a pipe and isn't otherwise able to determine whether a splice to the pipe will fill it or not. We could make the read non-blocking on O_NONBLOCK or some other splice flag, but for now this is the simplest fix. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13solos-pci: Fix race condition in tasklet RX handlingDavid Woodhouse
commit 1f6ea6e511e5ec730d8e88651da1b7b6e8fd1333 upstream. We were seeing faults in the solos-pci receive tasklet when packets arrived for a VCC which was currently being closed: [18842.727906] EIP: [<e082f490>] br2684_push+0x19/0x234 [br2684] SS:ESP 0068:dfb89d14 [18845.090712] [<c13ecff3>] ? do_page_fault+0x0/0x2e1 [18845.120042] [<e082f490>] ? br2684_push+0x19/0x234 [br2684] [18845.153530] [<e084fa13>] solos_bh+0x28b/0x7c8 [solos_pci] [18845.186488] [<e084f711>] ? solos_irq+0x2d/0x51 [solos_pci] [18845.219960] [<c100387b>] ? handle_irq+0x3b/0x48 [18845.247732] [<c10265cb>] ? irq_exit+0x34/0x57 [18845.274437] [<c1025720>] tasklet_action+0x42/0x69 [18845.303247] [<c102643f>] __do_softirq+0x8e/0x129 [18845.331540] [<c10264ff>] do_softirq+0x25/0x2a [18845.358274] [<c102664c>] _local_bh_enable_ip+0x5e/0x6a [18845.389677] [<c102666d>] local_bh_enable+0xb/0xe [18845.417944] [<e08490a8>] ppp_unregister_channel+0x32/0xbb [ppp_generic] [18845.458193] [<e08731ad>] pppox_unbind_sock+0x18/0x1f [pppox] This patch uses an RCU-inspired approach to fix it. In the RX tasklet's find_vcc() function we first refuse to use a VCC which already has the ATM_VF_READY bit cleared. And in the VCC close function, we synchronise with the tasklet to ensure that it can't still be using the VCC before we continue and allow the VCC to be destroyed. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Tested-by: Nathan Williams <nathan@traverse.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13PCI: disable MSI on VIA K8M800Tejun Heo
commit 549e15611b4ac1de51ef0e0a79c2704f50a638a2 upstream. MSI delivery from on-board ahci controller doesn't work on K8M800. At this point, it's unclear whether the culprit is with the ahci controller or the host bridge. Given the track record and considering the rather minimal impact of MSI, disabling it seems reasonable. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Rainer Hurtado Navarro <publio.escipion.el.africano@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13PCI: Do not run NVidia quirks related to MSI with MSI disabledRafael J. Wysocki
commit 3d2a531804d16cd8df6dbbb0429c6f143e756049 upstream. There is no reason to run NVidia-specific quirks related to HT MSI mappings with MSI disabled via pci=nomsi, so make __nv_msi_ht_cap_quirk() return immediately in that case. This allows at least one machine to boot 100% of the time with pci=nomsi (it still doesn't boot reliably without that). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16443 . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13Staging: panel: Prevent double-calling of parport_release - fix oops.Peter Huewe
commit 060132ae42cce3f9d2fd34d9a17b98362b44b9f9 upstream. This patch prevents the code from calling parport_release and parport_unregister_device twice with the same arguments - and thus fixes an oops. Rationale: After the first call the parport is already released and the handle isn't valid anymore and calling parport_release and parport_unregister_device twice isn't a good idea. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13Staging: line6: needs to select SND_PCMRandy Dunlap
commit e928c077e5cdcd72ee762125b37232aec1ff49f3 upstream. line6 uses snd_pcm*() functions, so it should select SND_PCM. ERROR: "snd_pcm_period_elapsed" [drivers/staging/line6/line6usb.ko] undefined! ERROR: "snd_pcm_set_ops" [drivers/staging/line6/line6usb.ko] undefined! ERROR: "snd_pcm_lib_free_pages" [drivers/staging/line6/line6usb.ko] undefined! ERROR: "snd_pcm_lib_ioctl" [drivers/staging/line6/line6usb.ko] undefined! ERROR: "snd_pcm_lib_malloc_pages" [drivers/staging/line6/line6usb.ko] undefined! ERROR: "snd_pcm_hw_constraint_ratdens" [drivers/staging/line6/line6usb.ko] undefined! ERROR: "snd_pcm_format_physical_width" [drivers/staging/line6/line6usb.ko] undefined! ERROR: "snd_pcm_lib_preallocate_pages_for_all" [drivers/staging/line6/line6usb.ko] undefined! ERROR: "snd_pcm_new" [drivers/staging/line6/line6usb.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Markus Grabner <grabner@icg.tugraz.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-29 04:49:32 +0000