summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-07-28Merge branch 'x86/iommu' of ↵Jesse Barnes
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip into for-linus
2008-07-28PCI: handle 64-bit resources better on 32-bit machinesMatthew Wilcox
If the kernel is configured to support 64-bit resources on a 32-bit machine, we can support 64-bit BARs properly. Just change the condition to check sizeof(resource_size_t) instead of BITS_PER_LONG. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-28PCI: rewrite PCI BAR reading codeMatthew Wilcox
Factor out the code to read one BAR from the loop in pci_read_bases into a new function, __pci_read_base. The new code is slightly more readable, better commented and removes the ifdef. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-28PCI: document pci_target_stateJesse Barnes
The empty kdoc was causing warnings, so provide some actual documentation. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-28PCI hotplug: fix typo in pcie hotplug outputJesse Barnes
Comamnd->Command Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: add driver for Atmel integrated touchscreen controller Input: ads7846 - optimize order of calculating Rt in ads7846_rx() Input: ads7846 - fix sparse endian warnings Input: uinput - remove duplicate include Input: serio - offload resume to kseriod Input: serio - mark serio_register_driver() __must_check
2008-07-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: fix uninitialized variable for search_rsb_list callers dlm: release socket on error dlm: fix basts for granted CW waiting PR/CW dlm: check for null in device_write
2008-07-28Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits) powerpc: Disable 64K hugetlb support when doing 64K SPU mappings powerpc/powermac: Fixup default serial port device for pmac_zilog powerpc/powermac: Use sane default baudrate for SCC debugging powerpc/mm: Implement _PAGE_SPECIAL & pte_special() for 64-bit powerpc: Show processor cache information in sysfs powerpc: Make core id information available to userspace powerpc: Make core sibling information available to userspace powerpc/vio: More fallout from dma_mapping_error API change ibmveth: Fix multiple errors with dma_mapping_error conversion powerpc/pseries: Fix CMO sysdev attribute API change fallout powerpc: Enable tracehook for the architecture powerpc: Add TIF_NOTIFY_RESUME support for tracehook powerpc: Add asm/syscall.h with the tracehook entry points powerpc: Make syscall tracing use tracehook.h helpers powerpc: Call tracehook_signal_handler() when setting up signal frames powerpc: Update cpu_sibling_maps dynamically powerpc: register_cpu_online should be __cpuinit powerpc: kill useless SMT code in prom_hold_cpus powerpc: Fix 8xx build failure powerpc: Fix vio build warnings ...
2008-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6: Remove deprecated virt_to_bus()
2008-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (72 commits) sh: SuperH Mobile CEU and camera platform data for AP325RXA sh: Update smc911x platform data for AP325RXA sh: SuperH Mobile LCDC platform data for AP325RXA sh: Add SuperH Mobile CEU platform data for Migo-R sh: Add SuperH Mobile LCDC platform data for Migo-R sh: Move asid_cache() out of ifdef to fix SH-3/4 nommu build. sh: Workaround for __put_user_asm() bug with gcc 4.x on big-endian. sh: Wire up new syscalls. sh: fix uImage Entry Point sh_keysc: remove request_mem_region() and release_mem_region() sh: Don't miss pending signals returning to user mode after signal processing sh: Use clk_always_enable() on sh7366 sh: Use clk_always_enable() on sh7343 / SE77343 sh: Use clk_always_enable() on sh7722 / Migo-R / SE7722 sh: Use clk_always_enable() on sh7723 / ap325rxa sh: Introduce clk_always_enable() function sh: Show all clocks and their state in /proc/clocks sh: Merge sh7343 and sh7722 clock code sh: Add SuperH Mobile MSTPCR bits to clock framework sh: Use arch_flags to simplify sh7722 siu clock code ...
2008-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: stop_machine: fix up ftrace.c stop_machine: Wean existing callers off stop_machine_run() stop_machine(): stop_machine_run() changed to use cpu mask Hotplug CPU: don't check cpu_online after take_cpu_down Simplify stop_machine stop_machine: add ALL_CPUS option module: fix build warning with !CONFIG_KALLSYMS
2008-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (98 commits) V4L/DVB (8549): mxl5007: Fix an error at include file V4L/DVB (8548): pwc: Fix compilation V4L/DVB (8546): add tuner-3036 and dpc7146 drivers to feature-removal-schedule.txt V4L/DVB (8546): saa7146: fix read from uninitialized memory V4L/DVB (8544): gspca: probe/open race. V4L/DVB (8543): em28xx: Rename #define for Compro VideoMate ForYou/Stereo V4L/DVB (8542): em28xx: AMD ATI TV Wonder HD 600 entry at cards struct is duplicated V4L/DVB (8541): em28xx: HVR-950 entry is duplicated. V4L/DVB (8540): em28xx-cards: Add Compro VideoMate ForYou/Stereo model V4L/DVB (8539): em28xx-cards: New supported IDs for analog models V4L/DVB (8538): em28xx-cards: Add GrabBeeX+ USB2800 model V4L/DVB (8534): remove select's of FW_LOADER V4L/DVB (8522): videodev2: Fix merge conflict V4L/DVB (8532): mxl5007t: remove excessive locks V4L/DVB (8531): mxl5007t: move i2c gate handling outside of mutex protected code blocks V4L/DVB (8530): au0828: add support for new revision of HVR950Q V4L/DVB (8529): mxl5007t: enable _init and _sleep power management functionality V4L/DVB (8528): add support for MaxLinear MxL5007T silicon tuner V4L/DVB (8526): saa7146: fix VIDIOC_ENUM_FMT V4L/DVB (8525): fix a few assorted spelling mistakes. ...
2008-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: Set CONFIG_HAVE_ARCH_TRACEHOOK sparc: Add task_pt_regs(). sparc: Add call to tracehook_signal_handler(). sparc: Create and use TIF_NOTIFY_RESUME. sparc: Use tracehook routines in syscall_trace(). sparc64: tracehook: CONFIG_HAVE_ARCH_TRACEHOOK sparc: Add user_stack_pointer(). sparc64: tracehook_signal_handler sparc64: tracehook: TIF_NOTIFY_RESUME sparc: Add asm/syscall.h sparc64: tracehook syscall sparc: enable headers_export again sparc, sparc64: use arch/sparc/include
2008-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: missing bits of net-namespace / sysctl ipcomp: Fix warnings after ipcomp consolidation. dccp: Add check for truncated ICMPv6 DCCP error packets dccp: Fix incorrect length check for ICMPv4 packets dccp: Add check for sequence number in ICMPv6 message dccp: Fix sequence number check for ICMPv4 packets dccp: Bug-Fix - AWL was never updated dccp: Allow to distinguish original and retransmitted packets
2008-07-28SubmittingPatches: add git pull & diffstat format infoRandy Dunlap
Add git pull command info and diffstat summary info so that we don't have to search email archives for it repeatedly. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28more sysdev API change fallout - drivers/base/memory.cStephen Rothwell
Noticed because of this warning: drivers/base/memory.c:279: warning: initialization from incompatible pointer type Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28ACPI/CPUIDLE: prevent setting pm_idle to NULLThomas Gleixner
pm_idle_save resp. pm_idle_old can be NULL when the restore code in acpi_processor_cst_has_changed() resp. cpuidle_uninstall_idle_handler() is called. This can set pm_idle unconditinally to NULL, which causes the kernel to panic when calling pm_idle in the x86 idle code. This was covered by an extra check for !pm_idle in the x86 idle code, which was removed during the x86 idle code refactoring. Instead of restoring the pm_idle check in the x86 code prevent the acpi/cpuidle code to set pm_idle to NULL. Reported by: Dhaval Giani http://lkml.org/lkml/2008/7/2/309 Based on a debug patch from Ingo Molnar Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28Merge branch 'i2c-for-linus' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds
* 'i2c-for-linus' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c: Blackfin I2C Driver: Functional power management support i2c: Documentation: upgrading clients HOWTO i2c: S3C24XX I2C frequency scaling support. i2c: i2c_gpio: keep probe resident for hotplugged devices. i2c: S3C2410: Pass the I2C bus number via drivers platform data
2008-07-28ipwireless: Preallocate received packet buffers with MRU sizeDavid Sterba
ipwireless: Preallocate received packet buffers with MRU size Packets are assembled from link size (~300 bytes) up to PPP MRU (1500 by default). Try to preallocate full size rather than repeatedly advance buffer size by 256 bytes. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28ipwireless: Put packets to pool startDavid Sterba
ipwireless: Put packets to pool start Put packets to pool start, try to reuse cached memory. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28ipwireless: Increase PPP outgoing queue sizeDavid Sterba
ipwireless: Increase PPP outgoing queue size Increase default size of PPP outgoing queue. Currently set to 1, which means that a packet quickly following another pushed by PPP must wait until hardware actually sends the previous and PPP has to be waken up by ppp_wakeup(). This slows down upstream. Now PPP can push more packets at once which get buffered inside driver and pushed immediatelly to hardware when previous packet is out. Experiments show that size = 10 is quite good for all connection types (GPRS/EDGE/UMTS) and gains 4 KB/sec of upload for UMTS for batch uploads. Need for higher queue size than 10 occures in only < 0.1 % of cases. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28ipwireless: Explicitly request io and mem regionsDavid Sterba
ipwireless: Explicitly request io and mem regions Documentation/pcmcia/driver-changes.txt says, that driver should call request_region for used memory/io regions since PCMCIA does not do this (since 2.6.8). Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28ipwireless: Constify buffer variablesDavid Sterba
ipwireless: Constify buffer variables Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28ipwireless: Do not return value from sending funcsDavid Sterba
ipwireless: Do not return value from sending funcs Do not return value from do_send_fragment and do_send_packet, it's not used. The packet size checks are not useful too: * zero length packet will never be sent, caller always passes packet_header size which is either 1 or 3 * MTU check is done in caller, no need to repeat Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28ipwireless: Remove endian-dependent bitfieldsDavid Sterba
ipwireless: Remove endian-dependent bitfields Remove endian-dependent bitfields and use bitmasks to transform packet header bitfields from/to machine order. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28ipwireless: Glue splitted printk strings backDavid Sterba
ipwireless: Glue splitted printk strings back Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28ipwireless: Remove pt_regs from interrupt handlerDavid Sterba
ipwireless: Remove pt_regs from interrupt handler Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28ipwireless: Rename spinlock variables to lockDavid Sterba
ipwireless: Rename spinlock variables to lock Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28ipwireless: Remove unused definesDavid Sterba
ipwireless: Remove unused defines Remove unused defines, defines hiding variables, defines hiding 0. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28ipwireless: Misc cleanupsDavid Sterba
ipwireless: Misc cleanups - remove likely() and some extra () in ifs - use unsigned in for loops - remove useless typecasts - remove obvious comments - add () around ?: Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28i2c: Blackfin I2C Driver: Functional power management supportMichael Hennerich
PM_SUSPEND_MEM: Blackfin does not maintain register state through Hibernate. Save and restore peripheral base initialization during PM transitions. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-28i2c: Documentation: upgrading clients HOWTOBen Dooks
Add a document describing how i2c clients on Linux 2.6 can be moved from the old to the new driver model. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-28i2c: S3C24XX I2C frequency scaling support.Ben Dooks
Add support for CPU frequency scaling to the S3C24XX I2C driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-28i2c: i2c_gpio: keep probe resident for hotplugged devices.Ben Dooks
Change the i2c_gpio driver to use platform_driver_register() instead of platform_driver_probe() to ensure that is can attach to any devices that may be loaded after it has initialised. Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-28i2c: S3C2410: Pass the I2C bus number via drivers platform dataBen Dooks
Allow the platform data to specify the bus bumber that the new I2C bus will be given. This is to allow the use of the board registration mechanism to specify the new style of I2C device registration which allows boards to provide a list of attached devices. Note, as discussed on the mailing list, we have dropped backwards compatibility of adding an dynamic bus number as it should not affect most boards to have the bus pinned to 0 if they have either not specified platform data for driver. Any board supplying platform data will automatically have the bus_num field set to 0, and anyone who needs the driver on a different bus number can supply platform data to set bus_num. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-28Remove deprecated virt_to_bus()Karsten Keil
Please pull from git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6.git master This was a forgotten item in a printk from the old driver, the DMA allocation use already the new interface. Signed-off-by: Karsten Keil <kkeil@suse.de>
2008-07-28sh: SuperH Mobile CEU and camera platform data for AP325RXAMagnus Damm
Add AP325RXA specific platform data for on-chip sh7723 CEU and ncm03j camera. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Update smc911x platform data for AP325RXAMagnus Damm
Pass board specific smc911x parameters using struct smc911x_platdata. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: SuperH Mobile LCDC platform data for AP325RXAMagnus Damm
Add LCD panel platform data for the AP325RXA board. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Add SuperH Mobile CEU platform data for Migo-RMagnus Damm
Add Migo-R specific platform data for on-chip sh7722 CEU and ov772x camera. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Add SuperH Mobile LCDC platform data for Migo-RMagnus Damm
Add WVGA and QVGA LCD panel support to Migo-R. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Move asid_cache() out of ifdef to fix SH-3/4 nommu build.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Workaround for __put_user_asm() bug with gcc 4.x on big-endian.Yoshinori Sato
I think this problem is GCC(4.1.2) bug. Syscall "getdents" returned "dirent->d_off" is always 0. I think other EB enviroment have same problem. Problem code 0c03c954 <filldir>: : c03c97a: 58 f7 mov.l @(28,r15),r8 !-> offset (high) c03c97c: 59 f8 mov.l @(32,r15),r9 !-> offset (low) c03c97e: 53 f9 mov.l @(36,r15),r3 c03c980: 54 fa mov.l @(40,r15),r4 : c03c9a0: 21 82 mov.l r8,@r1 !offset(high) -> dirent->d_off It's workaround patch. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Wire up new syscalls.Paul Mundt
This wires up the signalfd4, eventfd2, epoll_create1, dup3, pipe2, and inotify_init1 syscalls. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: fix uImage Entry PointYoshihiro Shimoda
fix the problem that cannot boot using uImage when PAGE_SIZE is 8kbyte or 64kbyte. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh_keysc: remove request_mem_region() and release_mem_region()Tetsuya Mukawa
Remove request_mem_region() and release_mem_region() from sh_keysc driver. Those functions can find resource conflict, but it is already checked in platform_device_add(). Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp> Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Don't miss pending signals returning to user mode after signal processingStuart MENEFY
Without this patch, signals sent during architecture specific signal handling (typically as a result of the user's stack being inaccessible) are ignored. This is the SH version of commit c3ff8ec31c1249d268cd11390649768a12bec1b9 which was for the i386. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Use clk_always_enable() on sh7366Magnus Damm
Use clk_always_enable() in the sh7366 processor code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Use clk_always_enable() on sh7343 / SE77343Magnus Damm
Use clk_always_enable() on the sh7343 processor and in the board code for Solution Engine 7343. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Use clk_always_enable() on sh7722 / Migo-R / SE7722Magnus Damm
Use clk_always_enable() on the sh7722 processor and in the board code for Migo-R and Solution Engine 7722. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-29 12:05:23 +0000