| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace
Conflicts:
include/linux/ftrace.h
kernel/trace/ftrace.c
|
|
'tracing/markers' into tracing/core
|
|
Impact: added precaution on failure detection
Break out of the modifying loop as soon as a failure is detected.
This is just an added precaution found by code review and was not
found by any bug chasing.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
|
|
Impact: fix to prevent NMI lockup
If the page fault handler produces a WARN_ON in the modifying of
text, and the system is setup to have a high frequency of NMIs,
we can lock up the system on a failure to modify code.
The modifying of code with NMIs allows all NMIs to modify the code
if it is about to run. This prevents a modifier on one CPU from
modifying code running in NMI context on another CPU. The modifying
is done through stop_machine, so only NMIs must be considered.
But if the write causes the page fault handler to produce a warning,
the print can slow it down enough that as soon as it is done
it will take another NMI before going back to the process context.
The new NMI will perform the write again causing another print and
this will hang the box.
This patch turns off the writing as soon as a failure is detected
and does not wait for it to be turned off by the process context.
This will keep NMIs from getting stuck in this back and forth
of print outs.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
|
|
Impact: keep kernel text read only
Because dynamic ftrace converts the calls to mcount into and out of
nops at run time, we needed to always keep the kernel text writable.
But this defeats the point of CONFIG_DEBUG_RODATA. This patch converts
the kernel code to writable before ftrace modifies the text, and converts
it back to read only afterward.
The kernel text is converted to read/write, stop_machine is called to
modify the code, then the kernel text is converted back to read only.
The original version used SYSTEM_STATE to determine when it was OK
or not to change the code to rw or ro. Andrew Morton pointed out that
using SYSTEM_STATE is a bad idea since there is no guarantee to what
its state will actually be.
Instead, I moved the check into the set_kernel_text_* functions
themselves, and use a local variable to determine when it is
OK to change the kernel text RW permissions.
[ Update: Ingo Molnar suggested moving the prototypes to cacheflush.h ]
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
|
|
Sometimes it happens that KConfig dependencies are not handled
like in the following scenario:
- config A
bool
- config B
bool
depends on A
- config C
bool
select B
If one selects C, then it will select B without checking its
dependency to A, if A hasn't been selected elsewhere, it will
result in a build failure.
This is what happens on the following build error:
kernel/built-in.o: In function `marker_update_probe_range':
(.text+0x52f64): undefined reference to `tracepoint_probe_register_noupdate'
kernel/built-in.o: In function `marker_update_probe_range':
(.text+0x52f74): undefined reference to `tracepoint_probe_unregister_noupdate'
kernel/built-in.o: In function `marker_update_probe_range':
(.text+0x52fb9): undefined reference to `tracepoint_probe_unregister_noupdate'
kernel/built-in.o: In function `marker_update_probes':
marker.c:(.text+0x530ba): undefined reference to `tracepoint_probe_update_all'
CONFIG_KVM_TRACE will select CONFIG_MARKER, but the latter
depends on CONFIG_TRACEPOINTS which will not be selected.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch creates the weak functions: ftrace_arch_code_modify_prepare
and ftrace_arch_code_modify_post_process that are called before and
after the stop machine is called to modify the kernel text.
If the arch needs to do pre or post processing, it only needs to define
these functions.
[ Update: Ingo Molnar suggested using the name ftrace_arch_code_modify_*
over using ftrace_arch_modify_* ]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6 into tracing/kmemtrace
Conflicts:
mm/slub.c
|
|
Impact: trace only functions matching a pattern
The set_graph_function file let one to trace only one or several
chosen functions and follow all their code flow.
Currently, only a constant function name is allowed so this patch
allows the ftrace_regex functions:
- matches all functions that end with "name":
echo *name > set_graph_function
- matches all functions that begin with "name":
echo name* > set_graph_function
- matches all functions that contains "name":
echo *name* > set_graph_function
Example:
echo mutex* > set_graph_function
0) | mutex_lock_nested() {
0) 0.563 us | __might_sleep();
0) 2.072 us | }
0) | mutex_unlock() {
0) 1.036 us | __mutex_unlock_slowpath();
0) 2.433 us | }
0) | mutex_unlock() {
0) 0.691 us | __mutex_unlock_slowpath();
0) 1.787 us | }
0) | mutex_lock_interruptible_nested() {
0) 0.548 us | __might_sleep();
0) 1.945 us | }
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
|
|
As a preparational patch to bump up page allocator pass-through threshold,
introduce two new constants SLUB_MAX_SIZE and SLUB_PAGE_SHIFT and convert
mm/slub.c to use them.
Reported-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Tested-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
|
|
Steven Rostedt found a bug in where in his modified kernel
ftrace was unable to modify the kernel text, due to the PMD
itself having been marked read-only as well in
split_large_page().
The fix, suggested by Linus, is to not try to 'clone' the
reference protection of a huge-page, but to use the standard
(and permissive) page protection bits of KERNPG_TABLE.
The 'cloning' makes sense for the ptes but it's a confused and
incorrect concept at the page table level - because the
pagetable entry is a set of all ptes and hence cannot
'clone' any single protection attribute - the ptes can be any
mixture of protections.
With the permissive KERNPG_TABLE, even if the pte protections
get changed after this point (due to ftrace doing code-patching
or other similar activities like kprobes), the resulting combined
protections will still be correct and the pte's restrictive
(or permissive) protections will control it.
Also update the comment.
This bug was there for a long time but has not caused visible
problems before as it needs a rather large read-only area to
trigger. Steve possibly hacked his kernel with some really
large arrays or so. Anyway, the bug is definitely worth fixing.
[ Huang Ying also experienced problems in this area when writing
the EFI code, but the real bug in split_large_page() was not
realized back then. ]
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Huang Ying <ying.huang@intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: fix time warps under vmware
Similar to the check for TSC going backwards in the TSC clocksource,
we also need this check for VMI clocksource.
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: stable@kernel.org
|
|
* master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 5405/1: ep93xx: remove unused gesbc9312.h header
[ARM] 5404/1: Fix condition in arm_elf_read_implies_exec() to set READ_IMPLIES_EXEC
[ARM] omap: fix clock reparenting in omap2_clk_set_parent()
[ARM] 5403/1: pxa25x_ep_fifo_flush() *ep->reg_udccs always set to 0
[ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo()
[ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support
[ARM] 5400/1: Add support for inverted rdy_busy pin for Atmel nand device controller
[ARM] 5391/1: AT91: Enable GPIO clocks earlier
[ARM] 5390/1: AT91: Watchdog fixes
[ARM] 5398/1: Add Wan ZongShun to MAINTAINERS for W90P910
[ARM] omap: fix _omap2_clksel_get_src_field()
[ARM] omap: fix omap2_divisor_to_clksel() error return value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, mce: fix ifdef for 64bit thermal apic vector clear on shutdown
x86, mce: use force_sig_info to kill process in machine check
x86, mce: reinitialize per cpu features on resume
x86, rcu: fix strange load average and ksoftirqd behavior
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: limit the number of loops the ring buffer self test can make
tracing: have function trace select kallsyms
tracing: disable tracing while testing ring buffer
tracing/function-graph-tracer: trace the idle tasks
|
|
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] fix "mem=" handling in case of standby memory
[S390] Fix timeval regression on s390
[S390] sclp: handle empty event buffers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
sound: virtuoso: revert "do not overwrite EEPROM on Xonar D2/D2X"
ALSA: jack - Use card->shortname for input name
ALSA: usb-audio - Workaround for misdetected sample rate with CM6207
ALSA: usb-audio - Fix non-continuous rate detection
sound: usb-audio: fix uninitialized variable with M-Audio MIDI interfaces
Revert "Sound: hda - Restore PCI configuration space with interrupts off"
|
|
Remove the gesbc9312.h header since it is unused.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
READ_IMPLIES_EXEC
READ_IMPLIES_EXEC must be set when:
o binary _is_ an executable stack (i.e. not EXSTACK_DISABLE_X)
o processor architecture is _under_ ARMv6 (XN bit is supported from ARMv6)
Signed-off-by: Makito SHIOKAWA <lkhmkt@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Standby memory detected with the sclp interface gets always registered
with add_memory calls without considering the limitationt that the
"mem=" kernel paramater implies.
So fix this and only register standby memory that is below the specified
limit.
This fixes zfcpdump since it uses "mem=32M". In case there is appr.
2GB standby memory present all of usable memory would be used for the
struct pages needed for standby memory.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
commit aa5e97ce4bbc9d5daeec16b1d15bb3f6b7b4f4d4
[PATCH] improve precision of process accounting.
Introduced a timing regression:
-bash-3.2# time ls
real 0m0.006s
user 0m1.754s
sys 0m1.094s
The problem was introduced by an error in cputime_to_timeval.
Cputime is now 1/4096 microsecond, therefore, we have to divide
the remainder with 4096 to get the microseconds.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Handle a malformed hardware response which some versions of the
Support Element (SE) may present during SE restart and which otherwise
would result in an endless loop in function sclp_dispatch_evbufs.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
When changing the parent of a clock, it is necessary to keep the
clock use counts balanced otherwise things the parent state will
get corrupted. Since we already disable and re-enable the clock,
we might as well use the recursive versions instead.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
|
|
|
|
|
|
Merge artifact: pid got changed to ent->pid meanwhile.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
- fix typos/grammos and clarify the text
- prettify the document some more
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
tracer
Update documentation for the function graph tracer.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: trace output cleanup/reordering
When an interrupt occurs and and the abstime option is selected:
echo funcgraph-abstime > /debug/tracing/trace_options
then we observe broken traces:
30581.025422 | 0) Xorg-4291 | 0.503 us | idle_cpu();
30581.025424 | 0) Xorg-4291 | 2.576 us | }
30581.025424 | 0) Xorg-4291 | + 75.771 us | }
0) Xorg-4291 | <========== |
30581.025425 | 0) Xorg-4291 | | schedule() {
30581.025426 | 0) Xorg-4291 | | __schedule() {
30581.025426 | 0) Xorg-4291 | 0.705 us | _spin_lock_irq();
With this patch, the interrupts output better adapts
to absolute time printing:
414.856543 | 1) Xorg-4279 | 8.816 us | }
414.856544 | 1) Xorg-4279 | 0.525 us | rcu_irq_exit();
414.856545 | 1) Xorg-4279 | 0.526 us | idle_cpu();
414.856546 | 1) Xorg-4279 | + 12.157 us | }
414.856549 | 1) Xorg-4279 | ! 104.114 us | }
414.856549 | 1) Xorg-4279 | <========== |
414.856549 | 1) Xorg-4279 | ! 107.944 us | }
414.856550 | 1) Xorg-4279 | ! 137.010 us | }
414.856551 | 1) Xorg-4279 | 0.624 us | _read_unlock();
414.856552 | 1) Xorg-4279 | ! 140.930 us | }
414.856552 | 1) Xorg-4279 | ! 166.159 us | }
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/function-graph-tracer
|
|
*ep->reg_udccs is always set to 0.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
In the non highmem case, if two memory banks of 1GB each are provided,
the second bank would evade suppression since its virtual base would
be 0. Fix this by disallowing any memory bank which virtual base
address is found to be lower than PAGE_OFFSET.
Reported-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
into tracing/core
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/urgent
|
|
This reverts commit 7e86c0e6850504ec9516b953f316a47277825e33 ("do not
overwrite EEPROM on Xonar D2/D2X") because it did not actually help with
the problem.
More user reports show that the overwriting of the EEPROM is not
triggered by using this driver but by installing Linux, and that the
installation of any other operating system (even one without any CMI8788
driver) has the same effect. In other words, the presence of this
driver does not have any effect on the occurrence of the error. (So
far, the available evidence seems to point to a BIOS bug.)
Furthermore, it turns out that the EEPROM chip is protected against
stray write commands by the command format and by requiring a separate
write-enable command, so the error scenario in the previous commit (that
SPI writes can be misinterpreted as an EEPROM write command) is not even
theoretically possible.
The mixer control that was removed as a consequence of the previous
commit can only be partially emulated in userspace, which also means it
cannot be seen be the in-kernel OSS API emulation, so it is better to
revert that change.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Conflicts:
block/blktrace.c
Semantic merge:
kernel/trace/blktrace.c
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: prevent deadlock if ring buffer gets corrupted
This patch adds a paranoid check to make sure the ring buffer consumer
does not go into an infinite loop. Since the ring buffer has been set
to read only, the consumer should not loop for more than the ring buffer
size. A check is added to make sure the consumer does not loop more than
the ring buffer size.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
|
|
Impact: fix output of function tracer to be useful
The function tracer is pretty useless if KALLSYMS is not configured.
Unless you are good at reading hex values, the function tracer should
select the KALLSYMS configuration.
Also, the dynamic function tracer will fail its self test if KALLSYMS
is not selected.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
|
|
Impact: fix to prevent hard lockup on self tests
If one of the tracers are broken and is constantly filling the ring
buffer while the test of the ring buffer is running, it will hang
the box. The reason is that the test is a consumer that will not
stop till the ring buffer is empty. But if the tracer is broken and
is constantly producing input to the buffer, this test will never
end. The result is a lockup of the box.
This happened when KALLSYMS was not defined and the dynamic ftrace
test constantly filled the ring buffer, because the filter failed
and all functions were being traced. Something was being called
that constantly filled the buffer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
|
|
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: fix deadlock in blk_abort_queue() for drivers that readd to timeout list
block: fix booting from partitioned md array
block: revert part of 18ce3751ccd488c78d3827e9f6bf54e6322676fb
cciss: PCI power management reset for kexec
paride/pg.c: xs(): &&/|| confusion
fs/bio: bio_alloc_bioset: pass right object ptr to mempool_free
block: fix bad definition of BIO_RW_SYNC
bsg: Fix sense buffer bug in SG_IO
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
omap_hsmmc: Change while(); loops with finite version
omap_hsmmc: recover from transfer failures
omap_hsmmc: only MMC1 allows HCTL.SDVS != 1.8V
omap_hsmmc: card detect irq bugfix
sdhci: fix led naming
mmc_test: fix basic read test
s3cmci: Fix hangup in do_pio_write()
Revert "sdhci: force high speed capability on some controllers"
MMC: fix bug - SDHC card capacity not correct
|
|
Enhanced lockdep coverage of __GFP_NOFS turned up this new lockdep
assert:
[ 1093.677775]
[ 1093.677781] =================================
[ 1093.680031] [ INFO: inconsistent lock state ]
[ 1093.680031] 2.6.29-rc5-tip-01504-gb49eca1-dirty #1
[ 1093.680031] ---------------------------------
[ 1093.680031] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
[ 1093.680031] kswapd0/308 [HC0[0]:SC0[0]:HE1:SE1] takes:
[ 1093.680031] (&inode->inotify_mutex){+.+.?.}, at: [<c0205942>] inotify_inode_is_dead+0x20/0x80
[ 1093.680031] {RECLAIM_FS-ON-W} state was registered at:
[ 1093.680031] [<c01696b9>] mark_held_locks+0x43/0x5b
[ 1093.680031] [<c016baa4>] lockdep_trace_alloc+0x6c/0x6e
[ 1093.680031] [<c01cf8b0>] kmem_cache_alloc+0x20/0x150
[ 1093.680031] [<c040d0ec>] idr_pre_get+0x27/0x6c
[ 1093.680031] [<c02056e3>] inotify_handle_get_wd+0x25/0xad
[ 1093.680031] [<c0205f43>] inotify_add_watch+0x7a/0x129
[ 1093.680031] [<c020679e>] sys_inotify_add_watch+0x20f/0x250
[ 1093.680031] [<c010389e>] sysenter_do_call+0x12/0x35
[ 1093.680031] [<ffffffff>] 0xffffffff
[ 1093.680031] irq event stamp: 60417
[ 1093.680031] hardirqs last enabled at (60417): [<c018d5f5>] call_rcu+0x53/0x59
[ 1093.680031] hardirqs last disabled at (60416): [<c018d5b9>] call_rcu+0x17/0x59
[ 1093.680031] softirqs last enabled at (59656): [<c0146229>] __do_softirq+0x157/0x16b
[ 1093.680031] softirqs last disabled at (59651): [<c0106293>] do_softirq+0x74/0x15d
[ 1093.680031]
[ 1093.680031] other info that might help us debug this:
[ 1093.680031] 2 locks held by kswapd0/308:
[ 1093.680031] #0: (shrinker_rwsem){++++..}, at: [<c01b0502>] shrink_slab+0x36/0x189
[ 1093.680031] #1: (&type->s_umount_key#4){+++++.}, at: [<c01e6d77>] shrink_dcache_memory+0x110/0x1fb
[ 1093.680031]
[ 1093.680031] stack backtrace:
[ 1093.680031] Pid: 308, comm: kswapd0 Not tainted 2.6.29-rc5-tip-01504-gb49eca1-dirty #1
[ 1093.680031] Call Trace:
[ 1093.680031] [<c016947a>] valid_state+0x12a/0x13d
[ 1093.680031] [<c016954e>] mark_lock+0xc1/0x1e9
[ 1093.680031] [<c016a5b4>] ? check_usage_forwards+0x0/0x3f
[ 1093.680031] [<c016ab74>] __lock_acquire+0x2c6/0xac8
[ 1093.680031] [<c01688d9>] ? register_lock_class+0x17/0x228
[ 1093.680031] [<c016b3d3>] lock_acquire+0x5d/0x7a
[ 1093.680031] [<c0205942>] ? inotify_inode_is_dead+0x20/0x80
[ 1093.680031] [<c08824c4>] __mutex_lock_common+0x3a/0x4cb
[ 1093.680031] [<c0205942>] ? inotify_inode_is_dead+0x20/0x80
[ 1093.680031] [<c08829ed>] mutex_lock_nested+0x2e/0x36
[ 1093.680031] [<c0205942>] ? inotify_inode_is_dead+0x20/0x80
[ 1093.680031] [<c0205942>] inotify_inode_is_dead+0x20/0x80
[ 1093.680031] [<c01e6672>] dentry_iput+0x90/0xc2
[ 1093.680031] [<c01e67a3>] d_kill+0x21/0x45
[ 1093.680031] [<c01e6a46>] __shrink_dcache_sb+0x27f/0x355
[ 1093.680031] [<c01e6dc5>] shrink_dcache_memory+0x15e/0x1fb
[ 1093.680031] [<c01b05ed>] shrink_slab+0x121/0x189
[ 1093.680031] [<c01b0d12>] kswapd+0x39f/0x561
[ 1093.680031] [<c01ae499>] ? isolate_pages_global+0x0/0x233
[ 1093.680031] [<c0157eae>] ? autoremove_wake_function+0x0/0x43
[ 1093.680031] [<c01b0973>] ? kswapd+0x0/0x561
[ 1093.680031] [<c0157daf>] kthread+0x41/0x82
[ 1093.680031] [<c0157d6e>] ? kthread+0x0/0x82
[ 1093.680031] [<c01043ab>] kernel_thread_helper+0x7/0x10
inotify_handle_get_wd() does idr_pre_get() which does a
kmem_cache_alloc() without __GFP_FS - and is hence deadlockable under
extreme MM pressure.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: MinChan Kim <minchan.kim@gmail.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
gpio_get_value() returns 0 or nonzero, but getmiso() expects 0 or 1.
Sanitize the value to a 0/1 boolean.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since I don't work for SUSE any more and the bwalle@suse.de address is
invalid, correct it in the copyright headers and documentation.
Signed-off-by: Bernhard Walle <bernhard.walle@gmx.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Build breaks when DELL_LAPTOP=y and POWER_SUPPLY=m. DELL_LAPTOP needs to
depend on POWER_SUPPLY.
dell-laptop.c:(.text+0x1ef3c4): undefined reference to `power_supply_is_system_supplied'
dell-laptop.c:(.text+0x1ef45e): undefined reference to `power_supply_is_system_supplied'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Otherwise, these don't work when called from 32-bit userspace on 64-bit
kernels.
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Submenus of the graphics support "Support for frame buffer devices" and
"Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)" are
broken in half after latest changes for Intel 915 mode setting support.
The DRM subsection is broken because one option is put outside the choice
section it depends on.
The frame buffers part is broken then due to circular dependency. Fix
this by make Intel frame buffers depend on CONFIG_INTEL_AGP.
Kconfigs are broken by d2f59357700487a8b944f4f7777d1e97cf5ea2ed
("drm/i915: select framebuffer support automatically").
This is probably not only way to fix this.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The floppy driver requests an I/O port it doesn't need, and sometimes this
causes a conflict with a motherboard device reported by PNPBIOS.
This patch makes the floppy driver request and release only the ports it
actually uses. It also factors out the request/release stuff and the
io-ports list so they're all in one place now.
The current floppy driver uses only these ports:
0x3f2 (FD_DOR)
0x3f4 (FD_STATUS)
0x3f5 (FD_DATA)
0x3f7 (FD_DCR/FD_DIR)
but it requests 0x3f2-0x3f5 and 0x3f7, which includes the unused port
0x3f3.
Some BIOSes report 0x3f3 as a motherboard resource. The PNP system driver
reserves that, which causes a conflict when the floppy driver requests
0x3f2-0x3f5 later.
Philippe reported that this conflict broke the floppy driver between
2.6.11 and 2.6.22. His PNPBIOS reports these devices:
$ cat 00:07/id 00:07/resources # motherboard device
PNP0c02
state = active
io 0x80-0x80
io 0x10-0x1f
io 0x22-0x3f
io 0x44-0x5f
io 0x90-0x9f
io 0xa2-0xbf
io 0x3f0-0x3f1
io 0x3f3-0x3f3
$ cat 00:03/id 00:03/resources # floppy device
PNP0700
state = active
io 0x3f4-0x3f5
io 0x3f2-0x3f2
Reference:
http://lkml.org/lkml/2009/1/31/162
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Reported-by: Philippe De Muyter <phdm@macqel.be>
Tested-by: Philippe De Muyter <phdm@macqel.be>
Cc: Adam M Belay <abelay@mit.edu>
Cc: Robert Hancock <hancockrwd@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
