summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-31ipv4: Consolidate all default route selection implementations.David S. Miller
Both fib_trie and fib_hash have a local implementation of fib_table_select_default(). This is completely unnecessary code duplication. Since we now remember the fib_table and the head of the fib alias list of the default route, we can implement one single generic version of this routine. Looking at the fib_hash implementation you may get the impression that it's possible for there to be multiple top-level routes in the table for the default route. The truth is, it isn't, the insert code will only allow one entry to exist in the zero prefix hash table, because all keys evaluate to zero and all keys in a hash table must be unique. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31ipv4: Remember FIB alias list head and table in lookup results.David S. Miller
This will be used later to implement fib_select_default() in a completely generic manner, instead of the current situation where the default route is re-looked up in the TRIE/HASH table and then the available aliases are analyzed. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31Merge branch 'batman-adv/next' of git://git.open-mesh.org/ecsv/linux-mergeDavid S. Miller
2011-01-31bnx2x: Update bnx2x version to 1.62.11-0Yaniv Rosner
Update bnx2x version to 1.62.11-0 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Remove support for emulation/FPGAYaniv Rosner
Remove unneeded support for emulation/FPGA from the code Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Add CMS functionality for 848x3Yaniv Rosner
Add CMS(Common Mode Sense) functionality for 848x3 as this reduces power consumption and allows a better 10G link stability Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Add support for new PHY BCM84833Yaniv Rosner
Add support for new PHY BCM84833. This PHY is very similar to the BCM84823, only it has different register offset compared to the BCM84823, which needs to be handled correctly. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Enhance SFP+ module controlYaniv Rosner
Add flexible support to control various SFP+ module features either throughout MDIO registers or GPIO pins according to NVRAM configuration Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Add and change some net_dev messagesYaniv Rosner
Add and modify some net dev prints to improve error control Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Fix compilation warning messagesYaniv Rosner
Fix annoying compilation warning, mainly related to static declarations Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Set comments according to preferred Linux styleYaniv Rosner
This patch contains cosmetic changes only of restyling comments according to Linux coding standard, and add comment for get_emac_base function. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Rename CL45 macroYaniv Rosner
This patch contains cosmetic changes only of renaming CL45_WR_OVER_CL22 macro to CL22_WR_OVER_CL45 as it should be. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Fix line indentationYaniv Rosner
This patch contains cosmetic changes only to fix code alignment, and update copyright comment year Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-01-31Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
2011-01-31batman-adv: Merge README of v2011.0.0 releaseSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-01-31batman-adv: Update copyright yearsSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-01-31batman-adv: Remove unused variablesSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-01-31batman-adv: Remove declaration of batman_skb_recvSven Eckelmann
batman_skb_recv can be defined in hard-interface.c as static because it is never used outside of that file. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-01-31batman-adv: Remove unused definitionsSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-01-31batman-adv: Remove dangling declaration of hash_remove_elementSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-01-31batman-adv: remove unused parametersSimon Wunderlich
Some function parameters are obsolete now and can be removed. Reported-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-01-31batman-adv: Calculate correct size for merged packetsSven Eckelmann
The routing algorithm must be able to decide if a fragment can be merged with the missing part and still be passed to a forwarding interface. The fragments can only differ by one byte in case that the original payload had an uneven length. In that situation the sender has to inform all possible receivers that the tail is one byte longer using the flag UNI_FRAG_LARGETAIL. The combination of UNI_FRAG_LARGETAIL and UNI_FRAG_HEAD flag makes it possible to calculate the correct length for even and uneven sized payloads. The original formula missed to add the unicast header at all and forgot to remove the fragment header of the second fragment. This made the results highly unreliable and only useful for machines with large differences between the configured MTUs. Reported-by: Russell Senior <russell@personaltelco.net> Reported-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-01-31batman-adv: Create roughly equal sized fragmentsSven Eckelmann
The routing algorithm must know how large two fragments are to be able to decide that it is safe to merge them or if it should resubmit without waiting for the second part. When these two fragments have a too different size, it is not possible to guess right in every situation. The user could easily configure the MTU of the attached cards so that one fragment is forwarded and the other one is added to the fragments table to wait for the missing part. For even sized packets, it is possible to split it so that the resulting packages are equal sized by ignoring the old non-fragment header at the beginning of the original packet. This still creates different sized fragments for uneven sized packets. Reported-by: Russell Senior <russell@personaltelco.net> Reported-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-01-30bnx2x: Update bnx2x version to 1.62.00-5Yaniv Rosner
Update bnx2x version to 1.62.00-5 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30bnx2x: Fix potential link loss in multi-function modeYaniv Rosner
All functions on a port should be set to take the MDC/MDIO lock to avoid contention on the bus Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30bnx2x: Fix port swap for BCM8073Yaniv Rosner
Fix link on BCM57712 + BCM8073 when port swap is enabled. Common PHY reset was done on the wrong port. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30bnx2x: Fix LED blink rate on BCM84823Yaniv Rosner
Fix blink rate of activity LED of the BCM84823 on 10G link Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30bnx2x: Remove setting XAUI low-power for BCM8073Yaniv Rosner
A rare link issue with the BCM8073 PHY may occur due to setting XAUI low power mode, while the PHY microcode already does that. The fix is not to set set XAUI low power mode for this PHY. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30Merge branch 'batman-adv/merge-oopsonly' of ↵David S. Miller
git://git.open-mesh.org/ecsv/linux-merge
2011-01-30batman-adv: Make vis info stack traversal threadsafeSven Eckelmann
The batman-adv vis server has to a stack which stores all information about packets which should be send later. This stack is protected with a spinlock that is used to prevent concurrent write access to it. The send_vis_packets function has to take all elements from the stack and send them to other hosts over the primary interface. The send will be initiated without the lock which protects the stack. The implementation using list_for_each_entry_safe has the problem that it stores the next element as "safe ptr" to allow the deletion of the current element in the list. The list may be modified during the unlock/lock pair in the loop body which may make the safe pointer not pointing to correct next element. It is safer to remove and use the first element from the stack until no elements are available. This does not need reduntant information which would have to be validated each time the lock was removed. Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-01-30batman-adv: Remove vis info element in free_infoSven Eckelmann
The free_info function will be called when no reference to the info object exists anymore. It must be ensured that the allocated memory gets freed and not only the elements which are managed by the info object. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-01-30batman-adv: Remove vis info on hashing errorsSven Eckelmann
A newly created vis info object must be removed when it couldn't be added to the hash. The old_info which has to be replaced was already removed and isn't related to the hash anymore. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-01-30net: Add compat ioctl support for the ipv4 multicast ioctl SIOCGETSGCNTEric W. Biederman
SIOCGETSGCNT is not a unique ioctl value as it it maps tio SIOCPROTOPRIVATE +1, which unfortunately means the existing infrastructure for compat networking ioctls is insufficient. A trivial compact ioctl implementation would conflict with: SIOCAX25ADDUID SIOCAIPXPRISLT SIOCGETSGCNT_IN6 SIOCGETSGCNT SIOCRSSCAUSE SIOCX25SSUBSCRIP SIOCX25SDTEFACILITIES To make this work I have updated the compat_ioctl decode path to mirror the the normal ioctl decode path. I have added an ipv4 inet_compat_ioctl function so that I can have ipv4 specific compat ioctls. I have added a compat_ioctl function into struct proto so I can break out ioctls by which kind of ip socket I am using. I have added a compat_raw_ioctl function because SIOCGETSGCNT only works on raw sockets. I have added a ipmr_compat_ioctl that mirrors the normal ipmr_ioctl. This was necessary because unfortunately the struct layout for the SIOCGETSGCNT has unsigned longs in it so changes between 32bit and 64bit kernels. This change was sufficient to run a 32bit ip multicast routing daemon on a 64bit kernel. Reported-by: Bill Fenner <fenner@aristanetworks.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30net: Fix ip link add netns oopsEric W. Biederman
Ed Swierk <eswierk@bigswitch.com> writes: > On 2.6.35.7 > ip link add link eth0 netns 9999 type macvlan > where 9999 is a nonexistent PID triggers an oops and causes all network functions to hang: > [10663.821898] BUG: unable to handle kernel NULL pointer dereference at 000000000000006d > [10663.821917] IP: [<ffffffff8149c2fa>] __dev_alloc_name+0x9a/0x170 > [10663.821933] PGD 1d3927067 PUD 22f5c5067 PMD 0 > [10663.821944] Oops: 0000 [#1] SMP > [10663.821953] last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq > [10663.821959] CPU 3 > [10663.821963] Modules linked in: macvlan ip6table_filter ip6_tables rfcomm ipt_MASQUERADE binfmt_misc iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack sco ipt_REJECT bnep l2cap xt_tcpudp iptable_filter ip_tables x_tables bridge stp vboxnetadp vboxnetflt vboxdrv kvm_intel kvm parport_pc ppdev snd_hda_codec_intelhdmi snd_hda_codec_conexant arc4 iwlagn iwlcore mac80211 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi i915 snd_seq_midi_event snd_seq thinkpad_acpi drm_kms_helper btusb tpm_tis nvram uvcvideo snd_timer snd_seq_device bluetooth videodev v4l1_compat v4l2_compat_ioctl32 tpm drm tpm_bios snd cfg80211 psmouse serio_raw intel_ips soundcore snd_page_alloc intel_agp i2c_algo_bit video output netconsole configfs lp parport usbhid hid e1000e sdhci_pci ahci libahci sdhci led_class > [10663.822155] > [10663.822161] Pid: 6000, comm: ip Not tainted 2.6.35-23-generic #41-Ubuntu 2901CTO/2901CTO > [10663.822167] RIP: 0010:[<ffffffff8149c2fa>] [<ffffffff8149c2fa>] __dev_alloc_name+0x9a/0x170 > [10663.822177] RSP: 0018:ffff88014aebf7b8 EFLAGS: 00010286 > [10663.822182] RAX: 00000000fffffff4 RBX: ffff8801ad900800 RCX: 0000000000000000 > [10663.822187] RDX: ffff880000000000 RSI: 0000000000000000 RDI: ffff88014ad63000 > [10663.822191] RBP: ffff88014aebf808 R08: 0000000000000041 R09: 0000000000000041 > [10663.822196] R10: 0000000000000000 R11: dead000000200200 R12: ffff88014aebf818 > [10663.822201] R13: fffffffffffffffd R14: ffff88014aebf918 R15: ffff88014ad62000 > [10663.822207] FS: 00007f00c487f700(0000) GS:ffff880001f80000(0000) knlGS:0000000000000000 > [10663.822212] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [10663.822216] CR2: 000000000000006d CR3: 0000000231f19000 CR4: 00000000000026e0 > [10663.822221] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [10663.822226] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > [10663.822231] Process ip (pid: 6000, threadinfo ffff88014aebe000, task ffff88014afb16e0) > [10663.822236] Stack: > [10663.822240] ffff88014aebf808 ffffffff814a2bb5 ffff88014aebf7e8 00000000a00ee8d6 > [10663.822251] <0> 0000000000000000 ffffffffa00ef940 ffff8801ad900800 ffff88014aebf818 > [10663.822265] <0> ffff88014aebf918 ffff8801ad900800 ffff88014aebf858 ffffffff8149c413 > [10663.822281] Call Trace: > [10663.822290] [<ffffffff814a2bb5>] ? dev_addr_init+0x75/0xb0 > [10663.822298] [<ffffffff8149c413>] dev_alloc_name+0x43/0x90 > [10663.822307] [<ffffffff814a85ee>] rtnl_create_link+0xbe/0x1b0 > [10663.822314] [<ffffffff814ab2aa>] rtnl_newlink+0x48a/0x570 > [10663.822321] [<ffffffff814aafcc>] ? rtnl_newlink+0x1ac/0x570 > [10663.822332] [<ffffffff81030064>] ? native_x2apic_icr_read+0x4/0x20 > [10663.822339] [<ffffffff814a8c17>] rtnetlink_rcv_msg+0x177/0x290 > [10663.822346] [<ffffffff814a8aa0>] ? rtnetlink_rcv_msg+0x0/0x290 > [10663.822354] [<ffffffff814c25d9>] netlink_rcv_skb+0xa9/0xd0 > [10663.822360] [<ffffffff814a8a85>] rtnetlink_rcv+0x25/0x40 > [10663.822367] [<ffffffff814c223e>] netlink_unicast+0x2de/0x2f0 > [10663.822374] [<ffffffff814c303e>] netlink_sendmsg+0x1fe/0x2e0 > [10663.822383] [<ffffffff81488533>] sock_sendmsg+0xf3/0x120 > [10663.822391] [<ffffffff815899fe>] ? _raw_spin_lock+0xe/0x20 > [10663.822400] [<ffffffff81168656>] ? __d_lookup+0x136/0x150 > [10663.822406] [<ffffffff815899fe>] ? _raw_spin_lock+0xe/0x20 > [10663.822414] [<ffffffff812b7a0d>] ? _atomic_dec_and_lock+0x4d/0x80 > [10663.822422] [<ffffffff8116ea90>] ? mntput_no_expire+0x30/0x110 > [10663.822429] [<ffffffff81486ff5>] ? move_addr_to_kernel+0x65/0x70 > [10663.822435] [<ffffffff81493308>] ? verify_iovec+0x88/0xe0 > [10663.822442] [<ffffffff81489020>] sys_sendmsg+0x240/0x3a0 > [10663.822450] [<ffffffff8111e2a9>] ? __do_fault+0x479/0x560 > [10663.822457] [<ffffffff815899fe>] ? _raw_spin_lock+0xe/0x20 > [10663.822465] [<ffffffff8116cf4a>] ? alloc_fd+0x10a/0x150 > [10663.822473] [<ffffffff8158d76e>] ? do_page_fault+0x15e/0x350 > [10663.822482] [<ffffffff8100a0f2>] system_call_fastpath+0x16/0x1b > [10663.822487] Code: 90 48 8d 78 02 be 25 00 00 00 e8 92 1d e2 ff 48 85 c0 75 cf bf 20 00 00 00 e8 c3 b1 c6 ff 49 89 c7 b8 f4 ff ff ff 4d 85 ff 74 bd <4d> 8b 75 70 49 8d 45 70 48 89 45 b8 49 83 ee 58 eb 28 48 8d 55 > [10663.822618] RIP [<ffffffff8149c2fa>] __dev_alloc_name+0x9a/0x170 > [10663.822627] RSP <ffff88014aebf7b8> > [10663.822631] CR2: 000000000000006d > [10663.822636] ---[ end trace 3dfd6c3ad5327ca7 ]--- This bug was introduced in: commit 81adee47dfb608df3ad0b91d230fb3cef75f0060 Author: Eric W. Biederman <ebiederm@aristanetworks.com> Date: Sun Nov 8 00:53:51 2009 -0800 net: Support specifying the network namespace upon device creation. There is no good reason to not support userspace specifying the network namespace during device creation, and it makes it easier to create a network device and pass it to a child network namespace with a well known name. We have to be careful to ensure that the target network namespace for the new device exists through the life of the call. To keep that logic clear I have factored out the network namespace grabbing logic into rtnl_link_get_net. In addtion we need to continue to pass the source network namespace to the rtnl_link_ops.newlink method so that we can find the base device source network namespace. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Where apparently I forgot to add error handling to the path where we create a new network device in a new network namespace, and pass in an invalid pid. Cc: stable@kernel.org Reported-by: Ed Swierk <eswierk@bigswitch.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30caif: bugfix - add caif headers for userspace usage.sjur.brandeland@stericsson.com
Add caif_socket.h and if_caif.h to the kernel header files exported for use by userspace. Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30slcan: fix referenced website in Kconfig help textOliver Hartkopp
Fix the referenced project website to www.mictronics.de in the Kconfig help text for the slcan driver. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-29gro: Reset dev pointer on reuseHerbert Xu
On older kernels the VLAN code may zero skb->dev before dropping it and causing it to be reused by GRO. Unfortunately we didn't reset skb->dev in that case which causes the next GRO user to get a bogus skb->dev pointer. This particular problem no longer happens with the current upstream kernel due to changes in VLAN processing. However, for correctness we should still reset the skb->dev pointer in the GRO reuse function in case a future user does the same thing. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-28ipv4: If fib metrics are default, no need to grab ref to FIB info.David S. Miller
The fib metric memory in this case is static in the kernel image, so we don't need to reference count it since it's never going to go away on us. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-28ipv4: Attach FIB info to dst_default_metrics when possibleDavid S. Miller
If there are no explicit metrics attached to a route, hook fi->fib_info up to dst_default_metrics. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-28ipv4: Allocate fib metrics dynamically.David S. Miller
This is the initial gateway towards super-sharing metrics if they are all set to zero for a route. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-28netfilter: xt_iprange: add IPv6 match debug print codeThomas Jacob
Signed-off-by: Thomas Jacob <jacob@internet24.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-01-27net: Pre-COW metrics for TCP.David S. Miller
TCP is going to record metrics for the connection, so pre-COW the route metrics at route cache entry creation time. This avoids several atomic operations that have to occur if we COW the metrics after the entry reaches global visibility. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27Merge branch 'master' of ↵David S. Miller
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-01-27sungem: Use net_device's internal statsDenis Kirjanov
Use net_device_stats instance from the struct net_device. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27drivers/net: remove some rcu sparse warningsEric Dumazet
Add missing __rcu annotations and helpers. minor : Fix some rcu_dereference() calls in macvtap Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27net: fix dev_seq_next()Eric Dumazet
Commit c6d14c84566d (net: Introduce for_each_netdev_rcu() iterator) added a race in dev_seq_next(). The rcu_dereference() call should be done _before_ testing the end of list, or we might return a wrong net_device if a concurrent thread changes net_device list under us. Note : discovered thanks to a sparse warning : net/core/dev.c:3919:9: error: incompatible types in comparison expression (different address spaces) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27net: Store ipv4/ipv6 COW'd metrics in inetpeer cache.David S. Miller
Please note that the IPSEC dst entry metrics keep using the generic metrics COW'ing mechanism using kmalloc/kfree. This gives the IPSEC routes an opportunity to use metrics which are unique to their encapsulated paths. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-01-27ipv6: Remove route peer binding assertions.David S. Miller
They are bogus. The basic idea is that I wanted to make sure that prefixed routes never bind to peers. The test I used was whether RTF_CACHE was set. But first of all, the RTF_CACHE flag is set at different spots depending upon which ip6_rt_copy() caller you're talking about. I've validated all of the code paths, and even in the future where we bind peers more aggressively (for route metric COW'ing) we never bind to prefix'd routes, only fully specified ones. This even applies when addrconf or icmp6 routes are allocated. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-18 02:01:03 +0000