summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-04-26Linux 2.6.32.12v2.6.32.12Greg Kroah-Hartman
2010-04-26r8169: clean up my printk uglynessNeil Horman
commit 93f4d91d879acfcb0ba9c2725e3133fcff2dfd1e upstream. Fix formatting on r8169 printk Brandon Philips noted that I had a spacing issue in my printk for the last r8169 patch that made it quite ugly. Fix that up and add the PFX macro to it as well so it looks like the other r8169 printks Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26x86/gart: Disable GART explicitly before initializationJoerg Roedel
commit 4b83873d3da0704987cb116833818ed96214ee29 upstream. If we boot into a crash-kernel the gart might still be enabled and its caches might be dirty. This can result in undefined behavior later. Fix it by explicitly disabling the gart hardware before initialization and flushing the caches after enablement. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26KVM: x86: Fix TSS size check for 16-bit tasksJan Kiszka
(Cherry-picked from commit e8861cfe2c75bdce36655b64d7ce02c2b31b604d) A 16-bit TSS is only 44 bytes long. So make sure to test for the correct size on task switch. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26KVM: Increase NR_IOBUS_DEVS limit to 200Sridhar Samudrala
(Cherry-picked from commit e80e2a60ff7914dae691345a976c80bbbff3ec74) This patch increases the current hardcoded limit of NR_IOBUS_DEVS from 6 to 200. We are hitting this limit when creating a guest with more than 1 virtio-net device using vhost-net backend. Each virtio-net device requires 2 such devices to service notifications from rx/tx queues. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26KVM: fix the handling of dirty bitmaps to avoid overflowsTakuya Yoshikawa
(Cherry-picked from commit 87bf6e7de1134f48681fd2ce4b7c1ec45458cb6d) Int is not long enough to store the size of a dirty bitmap. This patch fixes this problem with the introduction of a wrapper function to calculate the sizes of dirty bitmaps. Note: in mark_page_dirty(), we have to consider the fact that __set_bit() takes the offset as int, not long. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26KVM: MMU: fix kvm_mmu_zap_page() and its calling pathXiao Guangrong
(Cherry-picked from commit 77662e0028c7c63e34257fda03ff9625c59d939d) This patch fix: - calculate zapped page number properly in mmu_zap_unsync_children() - calculate freeed page number properly kvm_mmu_change_mmu_pages() - if zapped children page it shoud restart hlist walking KVM-Stable-Tag. Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26KVM: VMX: Save/restore rflags.vm correctly in real modeAvi Kivity
(Cherry-picked from commit 78ac8b47c566dd6177a3b9b291b756ccb70670b7) Currently we set eflags.vm unconditionally when entering real mode emulation through virtual-8086 mode, and clear it unconditionally when we enter protected mode. The means that the following sequence KVM_SET_REGS (rflags.vm=1) KVM_SET_SREGS (cr0.pe=1) Ends up with rflags.vm clear due to KVM_SET_SREGS triggering enter_pmode(). Fix by shadowing rflags.vm (and rflags.iopl) correctly while in real mode: reads and writes to those bits access a shadow register instead of the actual register. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26KVM: allow bit 10 to be cleared in MSR_IA32_MC4_CTLAndre Przywara
(Cherry-picked from commit 114be429c8cd44e57f312af2bbd6734e5a185b0d) There is a quirk for AMD K8 CPUs in many Linux kernels (see arch/x86/kernel/cpu/mcheck/mce.c:__mcheck_cpu_apply_quirks()) that clears bit 10 in that MCE related MSR. KVM can only cope with all zeros or all ones, so it will inject a #GP into the guest, which will let it panic. So lets add a quirk to the quirk and ignore this single cleared bit. This fixes -cpu kvm64 on all machines and -cpu host on K8 machines with some guest Linux kernels. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26KVM: Don't spam kernel log when injecting exceptions due to bad cr writesAvi Kivity
(Cherry-picked from commit d6a23895aa82353788a1cc5a1d9a1c963465463e) These are guest-triggerable. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26KVM: SVM: Fix memory leaks that happen when svm_create_vcpu() failsTakuya Yoshikawa
(Cherry-picked from commit b7af40433870aa0636932ad39b0c48a0cb319057) svm_create_vcpu() does not free the pages allocated during the creation when it fails to complete the allocations. This patch fixes it. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26sched: Use proper type in sched_getaffinity()KOSAKI Motohiro
commit 8bc037fb89bb3104b9ae290d18c877624cd7d9cc upstream. Using the proper type fixes the following compiler warning: kernel/sched.c:4850: warning: comparison of distinct pointer types lacks a cast Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: torvalds@linux-foundation.org Cc: travis@sgi.com Cc: peterz@infradead.org Cc: drepper@redhat.com Cc: rja@sgi.com Cc: sharyath@in.ibm.com Cc: steiner@sgi.com LKML-Reference: <20100317090046.4C79.A69D9226@jp.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26mptspi: Fix for incorrect data underrun errataKashyap, Desai
commit 9b53b39243cf23a0b68eaa16c37ce16eada69a46 upstream. Errata: Certain conditions on the scsi bus may casue the 53C1030 to incorrectly signal a SCSI_DATA_UNDERRUN to the host. Workaround 1: For an Errata on LSI53C1030 When the length of request data and transfer data are different with result of command (READ or VERIFY), DID_SOFT_ERROR is set. Workaround 2: For potential trouble on LSI53C1030. It is checked whether the length of request data is equal to the length of transfer and residual. MEDIUM_ERROR is set by incorrect data. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26mptctl : Remove printk which floods unnecessary messages to var/log/messageKashyap, Desai
commit e39e145dfb78d4e20d89139d2576306b4279c126 upstream. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26IB/iser: Rewrite SG handling for RDMA logicOr Gerlitz
commit c1ccaf2478f84c2665cf57f981db143aa582d646 upstream. After dma-mapping an SG list provided by the SCSI midlayer, iser has to make sure the mapped SG is "aligned for RDMA" in the sense that its possible to produce one mapping in the HCA IOMMU which represents the whole SG. Next, the mapped SG is formatted for registration with the HCA. This patch re-writes the logic that does the above, to make it clearer and simpler. It also fixes a bug in the being aligned for RDMA checks, where a "start" check wasn't done but rather only "end" check. [commit message in RH kernel tree: "Under heavy load, without the patch, the HCA can be programmed to write (corrupt) into pages/location which doesn't belong to the SG associated with the actual I/O and cause a kernel oops."] Signed-off-by: Alexander Nezhinsky <alexandern@voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26tpm: autoload tpm_tis based on system PnP IDsMatt Domsch
commit 31bde71c202722a76686c3cf69a254c8a912275a upstream. The tpm_tis driver already has a list of supported pnp_device_ids. This patch simply exports that list as a MODULE_DEVICE_TABLE() so that the module autoloader will discover and load the module at boottime. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Morris <jmorris@namei.org> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26ext4: fix async i/o writes beyond 4GB to a sparse fileEric Sandeen
commit a1de02dccf906faba2ee2d99cac56799bda3b96a upstream. The "offset" member in ext4_io_end holds bytes, not blocks, so ext4_lblk_t is wrong - and too small (u32). This caused the async i/o writes to sparse files beyond 4GB to fail when they wrapped around to 0. Also fix up the type of arguments to ext4_convert_unwritten_extents(), it gets ssize_t from ext4_end_aio_dio_nolock() and ext4_ext_direct_IO(). Reported-by: Giel de Nijs <giel@vectorwise.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26ext4: flush delalloc blocks when space is lowEric Sandeen
commit c8afb44682fcef6273e8b8eb19fab13ddd05b386 upstream. Creating many small files in rapid succession on a small filesystem can lead to spurious ENOSPC; on a 104MB filesystem: for i in `seq 1 22500`; do echo -n > $SCRATCH_MNT/$i echo XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX > $SCRATCH_MNT/$i done leads to ENOSPC even though after a sync, 40% of the fs is free again. This is because we reserve worst-case metadata for delalloc writes, and when data is allocated that worst-case reservation is not usually needed. When freespace is low, kicking off an async writeback will start converting that worst-case space usage into something more realistic, almost always freeing up space to continue. This resolves the testcase for me, and survives all 4 generic ENOSPC tests in xfstests. We'll still need a hard synchronous sync to squeeze out the last bit, but this fixes things up to a large degree. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26fs-writeback: Add helper function to start writeback if idleEric Sandeen
commit 17bd55d037a02b04d9119511cfd1a4b985d20f63 upstream. ext4, at least, would like to start pushing on writeback if it starts to get close to ENOSPC when reserving worst-case blocks for delalloc writes. Writing out delalloc data will convert those worst-case predictions into usually smaller actual usage, freeing up space before we hit ENOSPC based on this speculation. Thanks to Jens for the suggestion for the helper function, & the naming help. I've made the helper return status on whether writeback was started even though I don't plan to use it in the ext4 patch; it seems like it would be potentially useful to test this in some cases. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: Jan Kara <jack@suse.cz> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26mac80211: fix deferred hardware scan requestsJohannes Berg
commit c0ce77b8323c1a0d4eeef97caf16c0ea971222a9 upstream. Reinette found the reason for the warnings that happened occasionally when a hw-offloaded scan finished; her description of the problem: mac80211 will defer the handling of scan requests if it is busy with management work at the time. The scan requests are deferred and run after the work has completed. When this occurs there are currently two problems. * The scan request for hardware scan is not fully populated with the band and channels to scan not initialized. * When the scan is queued the state is not correctly updated to reflect that a scan is in progress. The problem here is that when the driver completes the scan and calls ieee80211_scan_completed() a warning will be triggered since mac80211 was not aware that a scan was in progress. The reason is that the queued scan work will start the hw scan right away when the hw_scan_req struct has already been allocated. However, in the first pass it will not have been filled, which happens at the same time as setting the bits. To fix this, simply move the allocation after the pending work test as well, so that the first iteration of the scan work will call __ieee80211_start_scan() even in the hardware scan case. Bug-identified-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26ALSA: hda: Set Front Mic to input vref 50% for Lenovo 3000 Y410Daniel T Chen
commit e2595322a3a353a59cecd7f57e7aa421ecb02d12 upstream. BugLink: https://bugs.launchpad.net/bugs/479373 The OR has verified with hda-verb that the internal microphone needs VREF50 set for audible capture. Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26nfsd: ensure sockets are closed on errorNeil Brown
commit 301e99ce4a2f42a317129230fd42e6cd874c64b0 upstream. One the changes in commit d7979ae4a "svc: Move close processing to a single place" is: err_delete: - svc_delete_socket(svsk); + set_bit(SK_CLOSE, &svsk->sk_flags); return -EAGAIN; This is insufficient. The recvfrom methods must always call svc_xprt_received on completion so that the socket gets re-queued if there is any more work to do. This particular path did not make that call because it actually destroyed the svsk, making requeue pointless. When the svc_delete_socket was change to just set a bit, we should have added a call to svc_xprt_received, This is the problem that b0401d7253 attempted to fix, incorrectly. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26Revert "sunrpc: move the close processing after do recvfrom method"J. Bruce Fields
commit 1b644b6e6f6160ae35ce4b52c2ca89ed3e356e18 upstream. This reverts commit b0401d725334a94d57335790b8ac2404144748ee, which moved svc_delete_xprt() outside of XPT_BUSY, and allowed it to be called after svc_xpt_recived(), removing its last reference and destroying it after it had already been queued for future processing. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26Revert "sunrpc: fix peername failed on closed listener"J. Bruce Fields
commit f5822754ea006563e1bf0a1f43faaad49c0d8bb2 upstream. This reverts commit b292cf9ce70d221c3f04ff62db5ab13d9a249ca8. The commit that it attempted to patch up, b0401d725334a94d57335790b8ac2404144748ee, was fundamentally wrong, and will also be reverted. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26nfsd4: don't try to map gid's in generic rpc codeJ. Bruce Fields
commit dc83d6e27fa80babe31c80aa8568f125f72edf57 upstream. For nfsd we provide users the option of mapping uid's to server-side supplementary group lists. That makes sense for nfsd, but not necessarily for other rpc users (such as the callback client). So move that lookup to svcauth_unix_set_client, which is a program-specific method. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26md: deal with merge_bvec_fn in component devices better.NeilBrown
commit 627a2d3c29427637f4c5d31ccc7fcbd8d312cd71 upstream. If a component device has a merge_bvec_fn then as we never call it we must ensure we never need to. Currently this is done by setting max_sector to 1 PAGE, however this does not stop a bio being created with several sub-page iovecs that would violate the merge_bvec_fn. So instead set max_phys_segments to 1 and set the segment boundary to the same as a page boundary to ensure there is only ever one single-page segment of IO requested at a time. This can particularly be an issue when 'xen' is used as it is known to submit multiple small buffers in a single bio. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26module: fix __module_ref_addr()Mathieu Desnoyers
The __module_ref_addr() problem disappears in 2.6.34-rc kernels because these percpu accesses were re-factored. __module_ref_addr() should use per_cpu_ptr() to obfuscate the pointer (RELOC_HIDE is needed for per cpu pointers). This non-standard per-cpu pointer use has been introduced by commit 720eba31f47aeade8ec130ca7f4353223c49170f It causes a NULL pointer exception on some configurations when CONFIG_TRACING is enabled on 2.6.33. This patch fixes the problem (acknowledged by Randy who reported the bug). It did not appear to hurt previously because most of the accesses were done through local_inc, which probably obfuscated the access enough that no compiler optimizations were done. But with local_read() done when CONFIG_TRACING is active, this becomes a problem. Non-CONFIG_TRACING is probably affected as well (module.c contains local_set and local_read that use __module_ref_addr()), but I guess nobody noticed because we've been lucky enough that the compiler did not generate the inappropriate optimization pattern there. This patch should be queued for the 2.6.29.x through 2.6.33.x stable branches. (tested on 2.6.33.1 x86_64) Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Tested-by: Randy Dunlap <randy.dunlap@oracle.com> CC: Eric Dumazet <dada1@cosmosbay.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> CC: Tejun Heo <tj@kernel.org> CC: Ingo Molnar <mingo@elte.hu> CC: Andrew Morton <akpm@linux-foundation.org> CC: Linus Torvalds <torvalds@linux-foundation.org> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26lockdep: fix incorrect percpu usageMathieu Desnoyers
The mainline kernel as of 2.6.34-rc5 is not affected by this problem because commit 10fad5e46f6c7bdfb01b1a012380a38e3c6ab346 fixed it by refactoring. lockdep fix incorrect percpu usage Should use per_cpu_ptr() to obfuscate the per cpu pointers (RELOC_HIDE is needed for per cpu pointers). git blame points to commit: lockdep.c: commit 8e18257d29238311e82085152741f0c3aa18b74d But it's really just moving the code around. But it's enough to say that the problems appeared before Jul 19 01:48:54 2007, which brings us back to 2.6.23. It should be applied to stable 2.6.23.x to 2.6.33.x (or whichever of these stable branches are still maintained). (tested on 2.6.33.1 x86_64) Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> CC: Randy Dunlap <randy.dunlap@oracle.com> CC: Eric Dumazet <dada1@cosmosbay.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> CC: Tejun Heo <tj@kernel.org> CC: Ingo Molnar <mingo@elte.hu> CC: Andrew Morton <akpm@linux-foundation.org> CC: Linus Torvalds <torvalds@linux-foundation.org> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26modules: fix incorrect percpu usageMathieu Desnoyers
Mainline does not need this fix, as commit 259354deaaf03d49a02dbb9975d6ec2a54675672 fixed the problem by refactoring. Should use per_cpu_ptr() to obfuscate the per cpu pointers (RELOC_HIDE is needed for per cpu pointers). Introduced by commit: module.c: commit 6b588c18f8dacfa6d7957c33c5ff832096e752d3 This patch should be queued for the stable branch, for kernels 2.6.29.x to 2.6.33.x. (tested on 2.6.33.1 x86_64) Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> CC: Randy Dunlap <randy.dunlap@oracle.com> CC: Eric Dumazet <dada1@cosmosbay.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> CC: Tejun Heo <tj@kernel.org> CC: Ingo Molnar <mingo@elte.hu> CC: Andrew Morton <akpm@linux-foundation.org> CC: Linus Torvalds <torvalds@linux-foundation.org> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26Input: wacom - switch mode upon system resumePing Cheng
commit 014f61504af276ba9d9544d8a7401d8f8526eb73 upstream. When Wacom devices wake up from a sleep, the switch mode command (wacom_query_tablet_data) is needed before wacom_open is called. wacom_query_tablet_data should not be executed inside wacom_open since wacom_open is called more than once during probe. Reported-and-tested-by: Anton Anikin <Anton@Anikin.name> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26ACPI: EC: Limit burst to 64 bitsAlexey Starikovskiy
commit 2060c44576c79086ff24718878d7edaa7384a985 upstream. access_bit_width field is u8 in ACPICA, thus 256 value written to it becomes 0, causing divide by zero later. Proper fix would be to remove access_bit_width at all, just because we already have access_byte_width, which is access_bit_width / 8. Limit access width to 64 bit for now. https://bugzilla.kernel.org/show_bug.cgi?id=15749 fixes regression caused by the fix for: https://bugzilla.kernel.org/show_bug.cgi?id=14667 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26ACPI: EC: Allow multibyte access to ECAlexey Starikovskiy
commit dadf28a10c3eb29421837a2e413ab869ebd upstream http://bugzilla.kernel.org/show_bug.cgi?id=14667 [bwh: Backport to 2.6.32; same applies to 2.6.33] Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26perf_events, x86: Implement Intel Westmere/Nehalem-EX supportPeter Zijlstra
original patch commit ids: 452a339a976e7f782c786eb3f73080401e2fa3a6 and 134fbadf028a5977a1b06b0253d3ee33e6f0c642 perf_events, x86: Implement Intel Westmere support The new Intel documentation includes Westmere arch specific event maps that are significantly different from the Nehalem ones. Add support for this generation. Found the CPUID model numbers on wikipedia. Also ammend some Nehalem constraints, spotted those when looking for the differences between Nehalem and Westmere. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <20100127221122.151865645@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu> perf, x86: Enable Nehalem-EX support According to Intel Software Devel Manual Volume 3B, the Nehalem-EX PMU is just like regular Nehalem (except for the uncore support, which is completely different). Signed-off-by: Vince Weaver <vweaver1@eecs.utk.edu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Lin Ming <ming.m.lin@intel.com> LKML-Reference: <alpine.DEB.2.00.1004060956580.1417@cl320.eecs.utk.edu> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Youquan Song <youquan.song@linux.intel.com>
2010-04-26tcp: fix ICMP-RTO warDamian Lukowski
commit 598856407d4e20ebb4de01a91a93d89325924d43 upstream. Make sure, that TCP has a nonzero RTT estimation after three-way handshake. Currently, a listening TCP has a value of 0 for srtt, rttvar and rto right after the three-way handshake is completed with TCP timestamps disabled. This will lead to corrupt RTO recalculation and retransmission flood when RTO is recalculated on backoff reversion as introduced in "Revert RTO on ICMP destination unreachable" (f1ecd5d9e7366609d640ff4040304ea197fbc618). This behaviour can be provoked by connecting to a server which "responds first" (like SMTP) and rejecting every packet after the handshake with dest-unreachable, which will lead to softirq load on the server (up to 30% per socket in some tests). Thanks to Ilpo Jarvinen for providing debug patches and to Denys Fedoryshchenko for reporting and testing. Changes since v3: Removed bad characters in patchfile. Reported-by: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: Damian Lukowski <damian@tvk.rwth-aachen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26r8169: offical fix for CVE-2009-4537 (overlength frame DMAs)Neil Horman
commit c0cd884af045338476b8e69a61fceb3f34ff22f1 upstream. Official patch to fix the r8169 frame length check error. Based on this initial thread: http://marc.info/?l=linux-netdev&m=126202972828626&w=1 This is the official patch to fix the frame length problems in the r8169 driver. As noted in the previous thread, while this patch incurs a performance hit on the driver, its possible to improve performance dynamically by updating the mtu and rx_copybreak values at runtime to return performance to what it was for those NICS which are unaffected by the ideosyncracy (if there are any). Summary: A while back Eric submitted a patch for r8169 in which the proper allocated frame size was written to RXMaxSize to prevent the NIC from dmaing too much data. This was done in commit fdd7b4c3302c93f6833e338903ea77245eb510b4. A long time prior to that however, Francois posted 126fa4b9ca5d9d7cb7d46f779ad3bd3631ca387c, which expiclitly disabled the MaxSize setting due to the fact that the hardware behaved in odd ways when overlong frames were received on NIC's supported by this driver. This was mentioned in a security conference recently: http://events.ccc.de/congress/2009/Fahrplan//events/3596.en.html It seems that if we can't enable frame size filtering, then, as Eric correctly noticed, we can find ourselves DMA-ing too much data to a buffer, causing corruption. As a result is seems that we are forced to allocate a frame which is ready to handle a maximally sized receive. This obviously has performance issues with it, so to mitigate that issue, this patch does two things: 1) Raises the copybreak value to the frame allocation size, which should force appropriately sized packets to get allocated on rx, rather than a full new 16k buffer. 2) This patch only disables frame filtering initially (i.e., during the NIC open), changing the MTU results in ring buffer allocation of a size in relation to the new mtu (along with a warning indicating that this is dangerous). Because of item (2), individuals who can't cope with the performance hit (or can otherwise filter frames to prevent the bug), or who have hardware they are sure is unaffected by this issue, can manually lower the copybreak and reset the mtu such that performance is restored easily. Signed-off-by: Neil Horman <nhorman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26e1000e: stop cleaning when we reach tx_ring->next_to_useTerry Loftin
commit dac876193cd79ced36d0462749ea47c05844fb49 upstream. Tx ring buffers after tx_ring->next_to_use are volatile and could change, possibly causing a crash. Stop cleaning when we hit tx_ring->next_to_use. Signed-off-by: Terry Loftin <terry.loftin@hp.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Matthew Burgess <matthew@linuxfromscratch.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26iwlwifi: fix scan raceReinette Chatre
commit bbcbb9ef9735c67da303d30bd6beb9e699f0f508 upstream. There is a problem if an "internal short scan" is in progress when a mac80211 requested scan arrives. If this new scan request arrives within the "next_scan_jiffies" period then driver will immediately return success and complete the scan. The problem here is that the scan has not been fully initialized at this time (is_internal_short_scan is still set to true because of the currently running scan), which results in the scan completion never to be sent to mac80211. At this time also, evan though the internal short scan is still running the state (is_internal_short_scan) will be set to false, so when the internal scan does complete then mac80211 will receive a scan completion. Fix this by checking right away if a scan is in progress when a scan request arrives from mac80211. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26iwlwifi: clear all tx queues when firmware readyWey-Yi Guy
commit dff010ac8e57e43669518a14c0e945dfeb80c2a7 upstream. Reset and clear all the tx queues when finished downloading runtime uCode and ready to go into operation mode. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26USB: cdc-acm: Fix stupid NULL pointer in resume()Oliver Neukum
commit f0730924e9e32bb8935c60040a26d94179355088 upstream. Stupid logic bug passing a just nulled pointer Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26USB: cdc-acm: Update to new autopm APIOliver Neukum
commit 97d35f95552c9a0ee4777a7f04431a9fd1260478 upstream. Update cdc-acm to the async methods eliminating the workqueue [This fixes a reported lockup for the cdc-acm driver - gregkh] Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26sched: Fix a race between ttwu() and migrate_task()John Wright
Based on commit e2912009fb7b715728311b0d8fe327a1432b3f79 upstream, but done differently as this issue is not present in .33 or .34 kernels due to rework in this area. If a task is in the TASK_WAITING state, then try_to_wake_up() is working on it, and it will place it on the correct cpu. This commit ensures that neither migrate_task() nor __migrate_task() calls set_task_cpu(p) while p is in the TASK_WAKING state. Otherwise, there could be two concurrent calls to set_task_cpu(p), resulting in the task's cfs_rq being inconsistent with its cpu. Signed-off-by: John Wright <john.wright@hp.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26ecryptfs: fix error code for missing xattrs in lower fsChristian Pulvermacher
commit cfce08c6bdfb20ade979284e55001ca1f100ed51 upstream. If the lower file system driver has extended attributes disabled, ecryptfs' own access functions return -ENOSYS instead of -EOPNOTSUPP. This breaks execution of programs in the ecryptfs mount, since the kernel expects the latter error when checking for security capabilities in xattrs. Signed-off-by: Christian Pulvermacher <pulvermacher@gmx.de> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26eCryptfs: Decrypt symlink target for stat sizeTyler Hicks
commit 3a60a1686f0d51c99bd0df8ac93050fb6dfce647 upstream. Create a getattr handler for eCryptfs symlinks that is capable of reading the lower target and decrypting its path. Prior to this patch, a stat's st_size field would represent the strlen of the encrypted path, while readlink() would return the strlen of the decrypted path. This could lead to confusion in some userspace applications, since the two values should be equal. https://bugs.launchpad.net/bugs/524919 Reported-by: Loïc Minier <loic.minier@canonical.com> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26ecryptfs: fix use with tmpfs by removing d_drop from ecryptfs_destroy_inodeJeff Mahoney
commit 133b8f9d632cc23715c6d72d1c5ac449e054a12a upstream. Since tmpfs has no persistent storage, it pins all its dentries in memory so they have d_count=1 when other file systems would have d_count=0. ->lookup is only used to create new dentries. If the caller doesn't instantiate it, it's freed immediately at dput(). ->readdir reads directly from the dcache and depends on the dentries being hashed. When an ecryptfs mount is mounted, it associates the lower file and dentry with the ecryptfs files as they're accessed. When it's umounted and destroys all the in-memory ecryptfs inodes, it fput's the lower_files and d_drop's the lower_dentries. Commit 4981e081 added this and a d_delete in 2008 and several months later commit caeeeecf removed the d_delete. I believe the d_drop() needs to be removed as well. The d_drop effectively hides any file that has been accessed via ecryptfs from the underlying tmpfs since it depends on it being hashed for it to be accessible. I've removed the d_drop on my development node and see no ill effects with basic testing on both tmpfs and persistent storage. As a side effect, after ecryptfs d_drops the dentries on tmpfs, tmpfs BUGs on umount. This is due to the dentries being unhashed. tmpfs->kill_sb is kill_litter_super which calls d_genocide to drop the reference pinning the dentry. It skips unhashed and negative dentries, but shrink_dcache_for_umount_subtree doesn't. Since those dentries still have an elevated d_count, we get a BUG(). This patch removes the d_drop call and fixes both issues. This issue was reported at: https://bugzilla.novell.com/show_bug.cgi?id=567887 Reported-by: Árpád Bíró <biroa@demasz.hu> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Cc: Dustin Kirkland <kirkland@canonical.com> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26b43: Optimize PIO scratchbuffer usageMichael Buesch
commit 88499ab3d8dbbf9c080416952603742666c71262 upstream. This optimizes the PIO scratchbuffer usage. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26agp/hp: fixup hp agp after ACPI changesBjorn Helgaas
commit 67fe63b0715ccfaefa0af8a6e705c5470ee5cada upstream. Commit 15b8dd53f5ffa changed the string in info->hardware_id from a static array to a pointer and added a length field. But instead of changing "sizeof(array)" to "length", we changed it to "sizeof(length)" (== 4), which corrupts the string we're trying to null-terminate. We no longer even need to null-terminate the string, but we *do* need to check whether we found a HID. If there's no HID, we used to have an empty array, but now we have a null pointer. The combination of these defects causes this oops: Unable to handle kernel NULL pointer dereference (address 0000000000000003) modprobe[895]: Oops 8804682956800 [1] ip is at zx1_gart_probe+0xd0/0xcc0 [hp_agp] http://marc.info/?l=linux-ia64&m=126264484923647&w=2 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reported-by: Émeric Maschino <emeric.maschino@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26ALSA: hda - Add position_fix quirk for Biostar moboTakashi Iwai
commit 8815cd030fdd73932a791d1f06194c8db807cde7 upstream. The Biostar mobo seems to give a wrong DMA position, resulting in stuttering or skipping sounds on 2.6.34. Since the commit 7b3a177b0d4f92b3431b8dca777313a07533a710, "ALSA: pcm_lib: fix "something must be really wrong" condition", makes the position check more strictly, the DMA position problem is revealed more clearly now. The fix is to use only LPIB for obtaining the position, i.e. passing position_fix=1. This patch adds a static quirk to achieve it as default. Reported-by: Frank Griffin <ftg@roadrunner.com> Cc: Eric Piel <Eric.Piel@tremplin-utc.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26b43: fall back gracefully to PIO mode after fatal DMA errorsLinus Torvalds
commit 9e3bd9190800e8209b4a3e1d724c35f0738dcad2 upstream. This makes the b43 driver just automatically fall back to PIO mode when DMA doesn't work. The driver already told the user to do it, so rather than have the user reload the module with a new flag, just make the driver do it automatically. We keep the message as an indication that something is wrong, but now just automatically fall back to the hopefully working PIO case. (Some post-2.6.33 merge fixups by Larry Finger <Larry.Finger@lwfinger.net> and yours truly... -- JWL) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26b43: Allow PIO mode to be selected at module loadLarry Finger
commit b02914af4d7020828ce921a572589dd793517c09 upstream. If userencounter the "Fatal DMA Problem" with a BCM43XX device, and still wish to use b43 as the driver, their only option is to rebuild the kernel with CONFIG_B43_FORCE_PIO. This patch removes this option and allows PIO mode to be selected with a load-time parameter for the module. Note that the configuration variable CONFIG_B43_PIO is also removed. Once the DMA problem with the BCM4312 devices is solved, this patch will likely be reverted. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: John Daiker <daikerjohn@gmail.com> Cc: maximilian attems <max@stro.at> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-26b43: Remove reset after fatal DMA errorLarry Finger
commit 214ac9a4ead6cb254451c09d9c8234a76693feb1 upstream. As shown in Kernel Bugzilla #14761, doing a controller restart after a fatal DMA error does not accomplish anything other than consume the CPU on an affected system. Accordingly, substitute a meaningful message for the restart. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-28 14:10:24 +0000