summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-12-19pcm052: enable EEPROM driver in config, fix TSC IRQsPD13.0.0alpha3.0-pcm052-ts1Russell Robinson Jr
Signed-off-by: Russell Robinson Jr <rrobinson@phytec.com>
2012-12-19Initial phyCORE-Vybrid changesRussell Robinson Jr
Signed-off-by: Russell Robinson Jr <rrobinson@phytec.com>
2012-11-20mvf-dcu: Move ioctls to public headerAndy Voltz
2012-11-20mvf_dcu: init all dcu registers at boot timeEd Nash
2012-10-17ENGR00216078-2: switch: add L2 switch driver for Vybrid3.0-mvf-201210121659Jason Jin
Port the L2 switch driver from CF platform for Vybridi plaform. This driver usually should work together with the RSTP demo applications provided by fsl. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-10-17ENGR00216078-1: switch: add platform support for L2 switchJason Jin
Add platform support for Vybrid L2 switch driver. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-10-17ENGR00181358-3: fec: add second FEC support for VybridAlison Wang
Add second FEC support for Vybrid. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-10-17ENGR00212250-2: watchdog: Add watchdog driver support for VybridAlison Wang
Add watchdog driver support for Vybrid. Signed-off-by: Wang Xiaojun <b41435@freescale.com>
2012-10-17ENGR00212250-1: watchdog: Add platform support for watchdog driverAlison Wang
Add platform support for watchdog driver. Signed-off-by: Wang Xiaojun <b41435@freescale.com>
2012-10-17ENGR00181395-1: Add UART MISC functions support for FaradayJingchang Lu
Add hardware flow control support, Add transmit DMA support, Add FIFO operation support, Add MSB/LSB on data support, Add 9-bits MARK/SPACE support. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-10-17ENGR00181390-2: qspi: Add Quad SPI driver support for VybridAlison Wang
Add Quad SPI driver support for Vybrid. Signed-off-by: Alison Wang <b18965@freescale.com> Xiaochun Li <b41219@freescale.com>
2012-10-17ENGR00181390-1: qspi: Add platform support for Quad SPI driverAlison Wang
Add platform support for Quad SPI driver. Signed-off-by: Alison Wang <b18965@freescale.com> Xiaochun Li <b41219@freescale.com>
2012-10-17ENGR00181407-3: Add Compaq touch screen interface for nano-xAlison Wang
Add Compaq touch screen interface for nano-x. Nano-x work with touch screen driver via Compaq touch screen event format, this patch could add the support above mouse device. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-10-17ENGR00181407-2: ts: add touch screen driver support for VybirdAlison Wang
Add touch screen driver support for Vybird. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-10-17ENGR00181407-1: ts: add platform support for touch screen driverAlison Wang
Add platform support for touch screen driver. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-10-17ENGR00180953-2: dspi: update dspi driver support for VybridAlison Wang
Update dspi driver support for Vybrid after debugging on board. Signed-off-by: Jason Jin <jason.jin@freescale.com> Alison Wang <b18965@freescale.com>
2012-10-17ENGR00180953-1: dspi: update platform support for dspi driverAlison Wang
Update platform support for dspi driver after debugging on board. Signed-off-by: Jason Jin <jason.jin@freescale.com> Alison Wang <b18965@freescale.com>
2012-10-17ENGR00180956-3: Add PWM LED device support on MVF600Jingchang Lu
Four LEDS are connected to FTM0 ch0~3 on TWR-MVF600 board, the PWM signal can use control these LEDS on/off or demo. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-10-17ENGR00180956-2: Add FlexTimer PWM support on FaradayAlison Wang
The FlexTimer work on PWM mode with EPWM and CPWM supported. The API configures each FTM channels the same due to pwm subsystem interface restriction. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-10-17ENGR00180956-1: Add FlexTimer PWM device clock for FaradayJingchang Lu
Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR00220352: Fix reboot hung after set uart baudrate3.0-mvf-201208141602Jingchang Lu
Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12Enable the FEC as modulesJason Jin
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00212262-3: Faraday:Enable the ADMA2 function for SDHCJason Jin
This patch enable the ADMA2 function for the SDHC module used on Faraday board. Please note that the ADMA address should be 16 bytes aligned other than 4 byte in the spec. This patch also increased the SDHC module frequency to 200MHz. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00219771: Fix high-speed usb hub connection detection failure for FaradayJingchang Lu
Only disable the high-speed device disconnection detction for level-1 device, or the connection detecting would fail. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR00219354: Fix USB host driver compiled as module fail problemJingchang Lu
Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR00219461:Fix high resolution timer support FaradayJingchang Lu
Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR00219787:Fix UART baud rate and console setting for MVF platformJingchang Lu
Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR219758:There is CRC error when JFFS2 used as filesystemJason Jin
Enable the softecc in the config to make the NFC use softecc. also include the defconfig update for: ENGR220009:The LCD panel goes blank after a long time Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00220009: dcu: Add the option to enable or disable blanking supportAlison Wang
If framebuffer console support is enabled, blanking the screen will occur after a long time. To avoid it, the option for disabling blanking is added. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-12ENGR00219495: dcu: Fix module reinsert error for DCU driverAlison Wang
Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-12ENGR00219342: edma: Updated edma driver and edma test driverXiaochun Li
This patch is to update Edma driver after debugging on board. mainly, fixed the bug that resulting the request source of DMA1 overflow Signed-off-by: Xiaochun Li <b41219@freescale.com>
2012-09-12ENGR219460:There is call trace when the SD card removed and then pluged-intoJason Jin
The call trace introduced by the card interrupt. This patch try to fix this by disabling the card interrupt. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00219629 Farday:There is call trace for FEC pll clock sometimes.Jason Jin
This patch increase the delay time for the pll clock to lock. otherwise the kernel will panic for the locking failure. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00219616 One Micro-SD card remove will generate a lot of interruptsJason Jin
The PKE and PUE should be declared for the GPIO pull up, otherwise the pin will not be pulled up for the SDHC card detect input. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00180931-4 mvf: add default kernel config for FaradayAlison Wang
Add default kernel config for Faraday. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00180936-3: add the module for test eDMA driverXiaochun Li
This patch is to tests eDMA driver. a simple memory to memory transfer with a 32 bit source and destination transfer size that generates an interrupt when the transfer is complete. Signed-off-by: Xiaochun Li <b41219@freescale.com>
2012-09-12ENGR00181396-2: high-speed USB device disconnection managementJingchang Lu
Detection of high-speed USB device disconnection should be enable on connection and disable on disconnection. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR00181401,ENGR00181396-1: Add USB OTG controller support for MVF platformJingchang Lu
OTG1 acts as gadget and OTG2 acts as host on TWR-MVF600 board. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR00180953-2: dspi: add dspi driver support for FaradayAlison Wang
Add dspi driver support for Faraday. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-12ENGR00180953-1: dspi: add platform support for dspi driverAlison Wang
Add platform support for dspi driver. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-12ENGR00212251-2: sai: add SAI driver support for FaradayAlison Wang
Add SAI driver support for Faraday. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiaochun Li <b41219@freescale.com>
2012-09-12ENGR00212251-1: sai: add platform support for SAI driverAlison Wang
Add platform support for SAI driver. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-12ENGR00180947-2: dcu: add dcu driver support for FaradayAlison Wang
Add dcu driver support for Faraday. The penguin logo could be shown correctly and the microwindows application was also tested. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-12ENGR00180947-1: dcu: add platform support for dcu driverAlison Wang
Add platform support for dcu driver. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-12ENGR00181374-2: nfc: add NFC driver support for FaradayAlison Wang
Add NFC driver support for Faraday. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00181374-1: nfc: add platform support for NFC driverAlison Wang
Add platform support for NFC driver. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00180958: rtc: add platform support for RTC driverAlison Wang
Add platform support for RTC driver. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00181363-2: add I2C controller support for FaradayAlison Wang
Add the I2C controller support for Faraday. Enable the I2C0 for Faraday. There are some different with I.MX for I2C controller, The i2c enable bit is invert with i.mx and the interrupt clear is w1c on Faraday but w0c on i.mx As there are more than one devices on the bus, the drive strength is set to 50ohm, otherwise, some device can not be found. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00181363-1: add platform support for I2C controllerAlison Wang
Add platform support for I2C controller. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00180936-2: edma: add edma driver support for MVFAlison Wang
Add EDMA driver support for MVF. can use the "Always enable" model and DMA request sources from DMA1. Signed-off-by: Jingchang Lu <b35083@freescale.com> Signed-off-by: Xiaochun Li <b41219@freescale.com
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-29 03:18:33 +0000