summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-05-02wl12xx: discard corrupted packets in RXArik Nemtsov
When packets arrive with a RX descriptor indicating corruption, discard them. In general white-list the RX descriptor status to prevent rouge data from being sent up. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: implement the tx_frames_pending mac80211 callbackArik Nemtsov
Frames are considered pending when they reside in the driver TX queue or already queued in the FW. This notion of "pending" is appropriate for power save considerations in STA mode, but not necessarily in other modes (for instance P2P-GO). [Fixed a sparse warning about missing "static" in a function declaration -- Luca] Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: Enable dynamic memory for 127xIdo Yariv
The FW can dynamically manage its internal TX & RX memory pools, moving blocks from one pool to another when necessary. This can significantly improve performance. Currently this feature is enabled only for 128x. Enable dynamic memory for 127x as well. Other parameters in the memory configuration structure may need to be fine tuned, as the optimal values for these may change once dynamic memory is enabled. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: Restart TX when TX descriptors are availableIdo Yariv
The driver stops sending TX packets when either there aren't enough memory blocks, or it runs out of TX descriptors. The driver continues to send packets to the FW only when more memory blocks are available. The FW might free TX descriptors without freeing the corresponding memory blocks, especially when dynamic memory is enabled. In cases where memory blocks are not freed at all, the driver will keep waiting for more memory blocks indefinitely. Fix this by clearing the WL1271_FLAG_FW_TX_BUSY flag when there are available TX descriptors. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: Modify memory configuration for 128x/APIdo Yariv
The 128x/AP firmware does not yet support dynamic memory. Temporarily, the memory configuration for the 127x was used both for 127x/AP as well as 128x/AP. Since the two chips don't have the same number of memory blocks, TP was significantly degraded. This hasn't been fine tuned yet, but using the base 128x numbers (without dynamic memory) seems to yield much better results (around 30% more). Additional fine tuning will be required in the future. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: add debugfs entries for dtim_interval and beacon_intervalEliad Peller
When configuring ACX_WAKE_UP_CONDITIONS (before entering psm), we tell the firmware to wake up once in N DTIMs/beacons. Allow control of this value via debugfs (for debugging purposes). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: Update Power Save Exit Retries PacketsShahar Levi
Reducing the retries of sending PS exit packets to the peer AP. That fix is to avoid sending unrealizable number of PS exit packets in case of ap lost. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: FM WLAN coexistenceShahar Levi
Add support to FM WLAN coexistence (STA only). Some WiFi harmonics may interfere with FM operation, to avoid this problem special coexistence techniques are activated around some FM frequencies. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: configure rates when working in ibss modeEliad Peller
When working in ibss mode, we don't configure rate policy per station (as we use the same link for multiple stations), so currently the 1mb/s rate is being used. Instead, configure the firmware to use the whole 11b rates by default. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: avoid redundant join on interface reconfigurationEliad Peller
ieee80211_reconfig() sets most of the "changed" flags regardless of the actual change (e.g. BSS_CHANGED_ASSOC will be set even if the interface is still not associated). in this case the driver will issue some unneeded commands. Since the driver relies solely on the BSS_CHANGED_ASSOC flag, without checking if there was an actual change, it will end up issuing unjoin() and dummy_join() commands, although it was never associated and should just remain idle. Avoid it by checking the actual state change, in addition to the "changed" flag. (there seem to be more redundant configuration commands being issued, but they shouldn't harm) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: print actual rx packet size (without padding)Eliad Peller
When debugging, reduce the padding size from each rx packet, to get the actual packet size (so comparing it against a cap file will be easier) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: Set correct REF CLK and TCXO CLK values to the FWShahar Levi
Fix mismatch between the REF CLK and TCXO CLK information that is set in the platform data and the NVS, so we override what comes from the NVS and replace it with what comes from the platform data. [Small fix in a comment -- Luca] Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: avoid premature elp entranceEliad Peller
The elp_work is being enqueued on wl1271_ps_elp_sleep, but doesn't get cancelled on wl1271_ps_elp_wakeup. This might cause immediate entrance to elp when the wl->mutex is being released, rather than using the delayed enqueueing optimization. Cancel elp_work on wakeup request, and add a new WL1271_FLAG_ELP_REQUESTED flag to further synchronize the elp actions. [Fixed a couple of typos in some comments -- Luca] Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: sleep instead of wakeup after tx workEliad Peller
commit d05c806 ("wl12xx: rearrange some ELP wake_up/sleep calls") introduced a bug in which wl1271_ps_elp_wakeup() was called instead of wl1271_ps_elp_sleep() after completing the tx work. Reported-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: Set End-of-transaction Flag at Wl127x AP ModeShahar Levi
End-of-transaction flag should be set when working with wl127x chip on AP mode. Thanks Ido Yariv <ido@wizery.com> for the guidance with that. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-04-29mwl8k: Reducing extra_tx_headroom for tx optimization in AP modeYogesh Ashok Powar
The tx_headroom required for mwl8k driver is 32 bytes and it can use the space for 802.11 header received from mac80211. mwl8k considers the smallest 802.11 frame (CTS2self of 10 bytes) that can be received from mac80211 to compute the extra_tx_headroom as 22 (32 - 10) bytes. When the wireless interface is part of bridge, this extra_tx_headroom requirement results in a memcpy in mac80211 (in function pskb_expand_head) for all the data frames needing L2 forwarding/bridging, when NET_SKB_PAD is defined as 32. This patch reduces the extra_tx_headroom by 8 bytes so that memcpy of data frames in mac80211 is avoided in this case. The resize will be required in driver for frames with 802.11 header size of less than 18 bytes. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Pradeep Nemavat <pnemavat@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29ath9k_htc: Revamp LED managementSujith Manoharan
Remove all the convoluted hacks in the driver and simplify things by making use of mac80211's LED triggers. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29iwlegacy: remove sync_cmd_mutexStanislaw Gruszka
We now use priv->mutex to serialize sync command, remove old priv->sync_cmd_mutex and add assertion that priv->mutex must be locked. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29iwlegacy: more priv->mutex serializationStanislaw Gruszka
Check status bits with mutex taken, because when we wait for mutex unlock, status can change. Patch should also make remaining sync commands be send with priv->mutex taken. That will prevent execute these commands when we are currently reset firmware, what could possibly cause troubles. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29iwlegacy: fix enqueue hcmd race conditionsStanislaw Gruszka
We mark command as huge by using meta->flags from other (non huge) command, but flags can be possibly overridden, when non huge command is enqueued, what can lead to: WARNING: at lib/dma-debug.c:696 dma_debug_device_change+0x1a3/0x1f0() DMA-API: device driver has pending DMA allocations while released from device [count=1] To fix introduce additional CMD_MAPPED to mark command as mapped and serialize iwl_enqueue_hcmd() with iwl_tx_cmd_complete() using hcmd_lock. Serialization will also fix possible race conditions, because q->read_ptr, q->write_ptr are modified/used in parallel. Do not change callback, I did (and fixed) that mistake in iwlagn. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29iwlegacy: comment typo fix diable -> disableStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29iwlegacy: remove scan_tx_antennasStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29iwlegacy: remove unneeded __packedStanislaw Gruszka
struct iwl_queue is not part of firmware interface, so __packed is not needed. Remove it since is may affect performance. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29iwlegacy: remove unneeded disable_hw_scan checkStanislaw Gruszka
We never set STATUS_SCANNING in softwre scanning mode, disable_hw_scan check is unneeded. Correct debug message while at it. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29iwlegacy: simplify init geosStanislaw Gruszka
Don't need to use conditional as ch->band is already assigned to IEEE80211_BAND_5GHZ or IEEE80211_BAND_2GHZ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29iwlegacy: enable only rfkill interrupt when device is downStanislaw Gruszka
Add two below iwlwifi commits to iwlegacy: commit 554d1d027b19265c4aa3f718b3126d2b86e09a08 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Thu Dec 23 12:38:21 2010 +0100 iwlagn: enable only rfkill interrupt when device is down commit 3dd823e6b86407aed1a025041d8f1df77e43a9c8 Author: Don Fry <donald.h.fry@intel.com> Date: Sun Feb 6 09:29:45 2011 -0800 iwlagn: Re-enable RF_KILL interrupt when down Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29iwlegacy: remove duplicate initialization in iwl4956_down()Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29iwlagn: fix tx power initializationStanislaw Gruszka
Since commit f844a709a7d8f8be61a571afc31dfaca9e779621 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Fri Jan 28 16:47:44 2011 +0100 iwlwifi: do not set tx power when channel is changing we set device tx power during initialization to priv->tx_power_next, which itself is initialized to minimum power. That changed default behaviour of driver. Previously we initialized device to transmit at maximum available power by default. Patch change again to previous behaviour and cleanup tx power initialization. Fortunately this is not critical fix, as mac80211 layer setup tx power lately to 14dB, hence device does not operate at minimal transmit power all the time. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29ath9k_htc: Dump modal eeprom header for UB91/94/95Sujith Manoharan
Debugfs file location: <debugfs_mnt>/ieee80211/phy#/ath9k_htc/modal_eeprom Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29ath9k_htc: Dump base eeprom header for UB91/94/95Sujith Manoharan
Debugfs file location: <debugfs_mnt>/ieee80211/phy#/ath9k_htc/base_eeprom Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6
2011-04-29p54: avoid uninitialized variable warning for freqJohn W. Linville
CC [M] drivers/net/wireless/p54/eeprom.o drivers/net/wireless/p54/eeprom.c: In function ‘p54_parse_rssical’: drivers/net/wireless/p54/eeprom.c:494:8: warning: ‘freq’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29mwifiex: fix copy-n-paste 'thinko' for tsf_valJohn W. Linville
CC [M] drivers/net/wireless/mwifiex/join.o drivers/net/wireless/mwifiex/join.c: In function ‘mwifiex_cmd_802_11_associate’: drivers/net/wireless/mwifiex/join.c:119:8: warning: ‘tsf_val’ may be used uninitialized in this function drivers/net/wireless/mwifiex/join.c:103:12: note: ‘tsf_val’ was declared here Looks like a copy-n-paste error, identical lines are a few lines below the ones removed, with an actual memcpy to tsf_val in between... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29b43: avoid uninitialized variable warnings in phy_nJohn W. Linville
CC [M] drivers/net/wireless/b43/phy_n.o drivers/net/wireless/b43/phy_n.c: In function ‘b43_nphy_set_channel’: drivers/net/wireless/b43/phy_n.c:3848:47: warning: ‘tabent_r2’ may be used uninitialized in this function drivers/net/wireless/b43/phy_n.c:3849:47: warning: ‘tabent_r3’ may be used uninitialized in this function drivers/net/wireless/b43/phy_n.c: In function ‘b43_nphy_poll_rssi.clone.14’: drivers/net/wireless/b43/phy_n.c:2270:6: warning: ‘save_regs_phy$7’ may be used uninitialized in this function drivers/net/wireless/b43/phy_n.c:2270:6: warning: ‘save_regs_phy$8’ may be used uninitialized in this function FWIW, the usage of these variables is goverened by checks that match their initializations. So, I think these are actually false warnings. Still, I would rather avoid the warning SPAM... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29ath5k: fix uninitialized var warning for txf2txsJohn W. Linville
CC [M] drivers/net/wireless/ath/ath5k/reset.o drivers/net/wireless/ath/ath5k/reset.c: In function ‘ath5k_hw_init_core_clock’: drivers/net/wireless/ath/ath5k/reset.c:100:51: warning: ‘txf2txs’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28Bluetooth: Fix updating conn->auth_type in hci_io_capa_request_evtJohan Hedberg
In some circumstances hci_get_auth_req will return a value different from the current conn->auth_type. In these cases update conn->auth_type so that when a user confirm request comes it doesn't falsely trigger auto-accept. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Add store_hint parameter to mgmt_new_keyJohan Hedberg
Even for keys that shouldn't be stored some use cases require the knowledge of a new key having been created so that the conclusion of a successful pairing can be made. Therefore, always send the mgmt_new_key event but add a store_hint parameter to it to indicate to user space whether the key should be stored or not. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Remove old_key_type from mgmt_ev_new_keyJohan Hedberg
User space shouldn't have any need for the old key type so remove it from the corresponding Management interface event. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Fix connection key type updating for buggy controllersJohan Hedberg
If a controller generates a changed combination key as its first key the connection key type will not be correctly set. In these situations make sure the update the connection key type when such a buggy controller is detected. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Fix old_key_type logic for non-persistent keysJohan Hedberg
Even if there's no previous key stored the connection might still be secured with a non-persistent key and in that case the key type in the hci_conn struct should be checked. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Fix link key persistent storage criteriaJohan Hedberg
Link keys should only be stored if very specific criteria of the authentication process are fulfilled. This patch essentially copies the criteria that user space has so far been using to the kernel side so that the management interface works properly. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Fix logic in hci_pin_code_request_evtJohan Hedberg
The mgmt_ev_pin_code_request event should not be sent to user space if the request gets rejected by the kernel due to the pairable flag not being set. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Fix reason code for pairing rejectionJohan Hedberg
"Pairing not allowed" is 0x18 and not 0x16. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Add confirm_hint parameter to user confirmation requestsJohan Hedberg
When accepting a pairing request which fulfills the SSP auto-accept criteria we need to push the request all the way to the user for confirmation. This patch adds a new hint to the user_confirm_request management event so user space can know when to show a numeric comparison dialog and when to show a simple yes/no confirmation dialog. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Fix HCI_CONN_AUTH_PEND flag for all authentication requestsJohan Hedberg
The HCI_CONN_AUTH_PEND flag should be set whenever requesting authentication so that multiple pending requests can't occur. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Add variable SSP auto-accept delay supportJohan Hedberg
Some test systems require an arbitrary delay to the auto-accept test cases for Secure Simple Pairing in order for the tests to pass. Previously when this was handled in user space it was worked around by code modifications and recompilation, but now that it's on the kernel side it's more convenient if there's a debugfs interface for it. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Add automated SSP user confirmation responsesJohan Hedberg
This patch adds automated negative and positive (auto-accept) responses for Secure Simple Pairing user confirmation requests. The responses are only sent if the HCI_MGMT flag is set in order not to confuse older user space versions (without management interface support). Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28mwifiex: fix bug in mwifiex_save_curr_bcn()Amitkumar Karwar
Since timestamp in beacon buffer keeps changing all the time, the memcmp check in mwifiex_save_curr_bcn() is redundant. Remove that memcmp check and also avoid freeing and allocation of buffer if required beacon buffer size is same as previous one. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28mwifiex: HT capability information handlingAmitkumar Karwar
1) Initialise HT capabilities in cfg80211 properly. 2) Cfg80211 stack may modify "sband->ht_cap" to disable 40Mhz operation in 2.4GHz band (after recent patch "cfg80211: module_param to disable HT40 in 2.4GHz band") Therefore read "sband->ht_cap" instead of an adapter variable "hw_dot_11n_dev_cap" to get HT capabilities. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28mwifiex: check firmware capabilities while initialising 5GHz band parametersAmitkumar Karwar
There are some SD8787 cards which don't support 5GHz band. Therefore initialise 5GHz band parameters only if hardware supports the band. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-09-17 22:43:34 +0000