summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-04-02Linux 3.0.27v3.0.27Greg Kroah-Hartman
2012-04-02ASPM: Fix pcie devices with non-pcie childrenMatthew Garrett
commit c9651e70ad0aa499814817cbf3cc1d0b806ed3a1 upstream. Since 3.2.12 and 3.3, some systems are failing to boot with a BUG_ON. Some other systems using the pata_jmicron driver fail to boot because no disks are detected. Passing pcie_aspm=force on the kernel command line works around it. The cause: commit 4949be16822e ("PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled") changed the behaviour of pcie_aspm_sanity_check() to always return 0 if aspm is disabled, in order to avoid cases where we changed ASPM state on pre-PCIe 1.1 devices. This skipped the secondary function of pcie_aspm_sanity_check which was to avoid us enabling ASPM on devices that had non-PCIe children, causing trouble later on. Move the aspm_disabled check so we continue to honour that scenario. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=42979 and http://bugs.debian.org/665420 Reported-by: Romain Francoise <romain@orebokech.com> # kernel panic Reported-by: Chris Holland <bandidoirlandes@gmail.com> # disk detection trouble Signed-off-by: Matthew Garrett <mjg@redhat.com> Tested-by: Hatem Masmoudi <hatem.masmoudi@gmail.com> # Dell Latitude E5520 Tested-by: janek <jan0x6c@gmail.com> # pata_jmicron with JMB362/JMB363 [jn: with more symptoms in log message] Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02serial: sh-sci: fix a race of DMA submit_tx on transferYoshii Takashi
commit 49d4bcaddca977fffdea8b0b71f6e5da96dac78e upstream. When DMA is enabled, sh-sci transfer begins with uart_start() sci_start_tx() if (cookie_tx < 0) schedule_work() Then, starts DMA when wq scheduled, -- (A) process_one_work() work_fn_rx() cookie_tx = desc->submit_tx() And finishes when DMA transfer ends, -- (B) sci_dma_tx_complete() async_tx_ack() cookie_tx = -EINVAL (possible another schedule_work()) This A to B sequence is not reentrant, since controlling variables (for example, cookie_tx above) are not queues nor lists. So, they must be invoked as A B A B..., otherwise results in kernel crash. To ensure the sequence, sci_start_tx() seems to test if cookie_tx < 0 (represents "not used") to call schedule_work(). But cookie_tx will not be set (to a cookie, also means "used") until in the middle of work queue scheduled function work_fn_tx(). This gap between the test and set allows the breakage of the sequence under the very frequently call of uart_start(). Another gap between async_tx_ack() and another schedule_work() results in the same issue, too. This patch introduces a new condition "cookie_tx == 0" just to mark it is "busy" and assign it within spin-locked region to fill the gaps. Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02nfsd: don't allow zero length strings in cache_parse()Dan Carpenter
commit 6d8d17499810479eabd10731179c04b2ca22152f upstream. There is no point in passing a zero length string here and quite a few of that cache_parse() implementations will Oops if count is zero. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02compat: use sys_sendfile64() implementation for sendfile syscallChris Metcalf
commit 1631fcea8399da5e80a80084b3b8c5bfd99d21e7 upstream. <asm-generic/unistd.h> was set up to use sys_sendfile() for the 32-bit compat API instead of sys_sendfile64(), but in fact the right thing to do is to use sys_sendfile64() in all cases. The 32-bit sendfile64() API in glibc uses the sendfile64 syscall, so it has to be capable of doing full 64-bit operations. But the sys_sendfile() kernel implementation has a MAX_NON_LFS test in it which explicitly limits the offset to 2^32. So, we need to use the sys_sendfile64() implementation in the kernel for this case. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02x86, tls: Off by one limit checkDan Carpenter
commit 8f0750f19789cf352d7e24a6cc50f2ab1b4f1372 upstream. These are used as offsets into an array of GDT_ENTRY_TLS_ENTRIES members so GDT_ENTRY_TLS_ENTRIES is one past the end of the array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: http://lkml.kernel.org/r/20120324075250.GA28258@elgon.mountain Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02x86, tsc: Skip refined tsc calibration on systems with reliable TSCAlok Kataria
commit 57779dc2b3b75bee05ef5d1ada47f615f7a13932 upstream. While running the latest Linux as guest under VMware in highly over-committed situations, we have seen cases when the refined TSC algorithm fails to get a valid tsc_start value in tsc_refine_calibration_work from multiple attempts. As a result the kernel keeps on scheduling the tsc_irqwork task for later. Subsequently after several attempts when it gets a valid start value it goes through the refined calibration and either bails out or uses the new results. Given that the kernel originally read the TSC frequency from the platform, which is the best it can get, I don't think there is much value in refining it. So for systems which get the TSC frequency from the platform we should skip the refined tsc algorithm. We can use the TSC_RELIABLE cpu cap flag to detect this, right now it is set only on VMware and for Moorestown Penwell both of which have there own TSC calibration methods. Signed-off-by: Alok N Kataria <akataria@vmware.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Dirk Brandewie <dirk.brandewie@gmail.com> Cc: Alan Cox <alan@linux.intel.com> [jstultz: Reworked to simply not schedule the refining work, rather then scheduling the work and bombing out later] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02lockd: fix arg parsing for grace_period and timeout.NeilBrown
commit de5b8e8e047534aac6bc9803f96e7257436aef9c upstream. If you try to set grace_period or timeout via a module parameter to lockd, and do this on a big-endian machine where sizeof(int) != sizeof(unsigned long) it won't work. This number given will be effectively shifted right by the difference in those two sizes. So cast kp->arg properly to get correct result. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02xfrm: Access the replay notify functions via the registered callbacksSteffen Klassert
[ Upstream commit 1265fd616782ef03b98fd19f65c2b47fcd4ea11f ] We call the wrong replay notify function when we use ESN replay handling. This leads to the fact that we don't send notifications if we use ESN. Fix this by calling the registered callbacks instead of xfrm_replay_notify(). Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02sky2: override for PCI legacy power managementstephen hemminger
[ Upstream commit 5676cc7bfe1e388e87843f71daa229610385b41e ] Some BIOS's don't setup power management correctly (what else is new) and don't allow use of PCI Express power control. Add a special exception module parameter to allow working around this issue. Based on slightly different patch by Knut Petersen. Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02Remove printk from rds_sendmsgDave Jones
[ Upstream commit a6506e1486181975d318344143aca722b2b91621 ] no socket layer outputs a message for this error and neither should rds. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02net: fix napi_reuse_skb() skb reserveEric Dumazet
[ Upstream commit 2a2a459eeeff48640dc557548ce576d666ab06ed ] napi->skb is allocated in napi_get_frags() using netdev_alloc_skb_ip_align(), with a reserve of NET_SKB_PAD + NET_IP_ALIGN bytes. However, when such skb is recycled in napi_reuse_skb(), it ends with a reserve of NET_IP_ALIGN which is suboptimal. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02net: fix a potential rcu_read_lock() imbalance in rt6_fill_node()Eric Dumazet
[ Upstream commit 94f826b8076e2cb92242061e92f21b5baa3eccc2 ] Commit f2c31e32b378 (net: fix NULL dereferences in check_peer_redir() ) added a regression in rt6_fill_node(), leading to rcu_read_lock() imbalance. Thats because NLA_PUT() can make a jump to nla_put_failure label. Fix this by using nla_put() Many thanks to Ben Greear for his help Reported-by: Ben Greear <greearb@candelatech.com> Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02net: bpf_jit: fix BPF_S_LDX_B_MSH compilationEric Dumazet
[ Upstream commit dc72d99dabb870ca5bd6d9fff674be853bb4a88d ] Matt Evans spotted that x86 bpf_jit was incorrectly handling negative constant offsets in BPF_S_LDX_B_MSH instruction. We need to abort JIT compilation like we do in common_load so that filter uses the interpreter code and can call __load_pointer() Reference: http://lists.openwall.net/netdev/2011/07/19/11 Thanks to Indan Zupancic to bring back this issue. Reported-by: Matt Evans <matt@ozlabs.org> Reported-by: Indan Zupancic <indan@nul.nu> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02Fix pppol2tp getsockname()Benjamin LaHaise
[ Upstream commit bbdb32cb5b73597386913d052165423b9d736145 ] While testing L2TP functionality, I came across a bug in getsockname(). The IP address returned within the pppol2tp_addr's addr memember was not being set to the IP address in use. This bug is caused by using inet_sk() on the wrong socket (the L2TP socket rather than the underlying UDP socket), and was likely introduced during the addition of L2TPv3 support. Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02drm/i915: suspend fbdev device around suspend/hibernateDave Airlie
commit 3fa016a0b5c5237e9c387fc3249592b2cb5391c6 upstream. Looking at hibernate overwriting I though it looked like a cursor, so I tracked down this missing piece to stop the cursor blink timer. I've no idea if this is sufficient to fix the hibernate problems people are seeing, but please test it. Both radeon and nouveau have done this for a long time. I've run this personally all night hib/resume cycles with no fails. Reviewed-by: Keith Packard <keithp@keithp.com> Reported-by: Petr Tesarik <kernel@tesarici.cz> Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Reported-by: Lots of misc segfaults after hibernate across the world. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=37142 Tested-by: Dave Airlie <airlied@redhat.com> Tested-by: Bojan Smojver <bojan@rexursive.com> Tested-by: Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02Bluetooth: btusb: fix bInterval for high/super speed isochronous endpointsBing Zhao
commit fa0fb93f2ac308a76fa64eb57c18511dadf97089 upstream. For high-speed/super-speed isochronous endpoints, the bInterval value is used as exponent, 2^(bInterval-1). Luckily we have usb_fill_int_urb() function that handles it correctly. So we just call this function to fill in the RX URB. Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02module: Remove module size limitSasha Levin
commit f946eeb9313ff1470758e171a60fe7438a2ded3f upstream. Module size was limited to 64MB, this was legacy limitation due to vmalloc() which was removed a while ago. Limiting module size to 64MB is both pointless and affects real world use cases. Cc: Tim Abbott <tim.abbott@oracle.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02slub: Do not hold slub_lock when calling sysfs_slab_add()Christoph Lameter
commit 66c4c35c6bc5a1a452b024cf0364635b28fd94e4 upstream. sysfs_slab_add() calls various sysfs functions that actually may end up in userspace doing all sorts of things. Release the slub_lock after adding the kmem_cache structure to the list. At that point the address of the kmem_cache is not known so we are guaranteed exlusive access to the following modifications to the kmem_cache structure. If the sysfs_slab_add fails then reacquire the slub_lock to remove the kmem_cache structure from the list. Reported-by: Sasha Levin <levinsasha928@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02xfs: Fix oops on IO error during xlog_recover_process_iunlinks()Jan Kara
commit d97d32edcd732110758799ae60af725e5110b3dc upstream. When an IO error happens during inode deletion run from xlog_recover_process_iunlinks() filesystem gets shutdown. Thus any subsequent attempt to read buffers fails. Code in xlog_recover_process_iunlinks() does not count with the fact that read of a buffer which was read a while ago can really fail which results in the oops on agi = XFS_BUF_TO_AGI(agibp); Fix the problem by cleaning up the buffer handling in xlog_recover_process_iunlinks() as suggested by Dave Chinner. We release buffer lock but keep buffer reference to AG buffer. That is enough for buffer to stay pinned in memory and we don't have to call xfs_read_agi() all the time. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02backlight: fix typo in tosa_lcd.cMasanari Iida
commit 8da00edc1069f01c34510fa405dc15d96c090a3f upstream. Fix typo in drivers/video/backlight/tosa_lcd.c "tosa_lcd_reume" should be "tosa_lcd_resume". Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02dm exception store: fix init error pathAndrei Warkentin
commit aadbe266f2f89ccc68b52f4effc7b3a8b29521ef upstream. Call the correct exit function on failure in dm_exception_store_init. Signed-off-by: Andrei Warkentin <andrey.warkentin@gmail.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02dm crypt: add missing error handlingMikulas Patocka
commit 72c6e7afc43e19f68a31dea204fc366624d6eee9 upstream. Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02dm crypt: fix mempool deadlockMikulas Patocka
commit aeb2deae2660a1773c83d3c6e9e6575daa3855d6 upstream. This patch fixes a possible deadlock in dm-crypt's mempool use. Currently, dm-crypt reserves a mempool of MIN_BIO_PAGES reserved pages. It allocates first MIN_BIO_PAGES with non-failing allocation (the allocation cannot fail and waits until the mempool is refilled). Further pages are allocated with different gfp flags that allow failing. Because allocations may be done in parallel, this code can deadlock. Example: There are two processes, each tries to allocate MIN_BIO_PAGES and the processes run simultaneously. It may end up in a situation where each process allocates (MIN_BIO_PAGES / 2) pages. The mempool is exhausted. Each process waits for more pages to be freed to the mempool, which never happens. To avoid this deadlock scenario, this patch changes the code so that only the first page is allocated with non-failing gfp mask. Allocation of further pages may fail. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02udf: Fix deadlock in udf_release_file()Jan Kara
commit a0391a3ae91d301c0e59368531a4de5f0b122bcf upstream. udf_release_file() can be called from munmap() path with mmap_sem held. Thus we cannot take i_mutex there because that ranks above mmap_sem. Luckily, i_mutex is not needed in udf_release_file() anymore since protection by i_data_sem is enough to protect from races with write and truncate. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02vfs: fix d_ancestor() case in d_materialize_uniqueMichel Lespinasse
commit b18dafc86bb879d2f38a1743985d7ceb283c2f4d upstream. In d_materialise_unique() there are 3 subcases to the 'aliased dentry' case; in two subcases the inode i_lock is properly released but this does not occur in the -ELOOP subcase. This seems to have been introduced by commit 1836750115f2 ("fix loop checks in d_materialise_unique()"). Signed-off-by: Michel Lespinasse <walken@google.com> [ Added a comment, and moved the unlock to where we generate the -ELOOP, which seems to be more natural. You probably can't actually trigger this without a buggy network file server - d_materialize_unique() is for finding aliases on non-local filesystems, and the d_ancestor() case is for a hardlinked directory loop. But we should be robust in the case of such buggy servers anyway. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02ext4: check for zero length extentTheodore Ts'o
commit 31d4f3a2f3c73f279ff96a7135d7202ef6833f12 upstream. Explicitly test for an extent whose length is zero, and flag that as a corrupted extent. This avoids a kernel BUG_ON assertion failure. Tested: Without this patch, the file system image found in tests/f_ext_zero_len/image.gz in the latest e2fsprogs sources causes a kernel panic. With this patch, an ext4 file system error is noted instead, and the file system is marked as being corrupted. https://bugzilla.kernel.org/show_bug.cgi?id=42859 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02ext4: ignore EXT4_INODE_JOURNAL_DATA flag with delallocLukas Czerner
commit 3d2b158262826e8b75bbbfb7b97010838dd92ac7 upstream. Ext4 does not support data journalling with delayed allocation enabled. We even do not allow to mount the file system with delayed allocation and data journalling enabled, however it can be set via FS_IOC_SETFLAGS so we can hit the inode with EXT4_INODE_JOURNAL_DATA set even on file system mounted with delayed allocation (default) and that's where problem arises. The easies way to reproduce this problem is with the following set of commands: mkfs.ext4 /dev/sdd mount /dev/sdd /mnt/test1 dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 chattr +j /mnt/test1/file dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 conv=notrunc chattr -j /mnt/test1/file Additionally it can be reproduced quite reliably with xfstests 272 and 269. In fact the above reproducer is a part of test 272. To fix this we should ignore the EXT4_INODE_JOURNAL_DATA inode flag if the file system is mounted with delayed allocation. This can be easily done by fixing ext4_should_*_data() functions do ignore data journal flag when delalloc is set (suggested by Ted). We also have to set the appropriate address space operations for the inode (again, ignoring data journal flag if delalloc enabled). Additionally this commit introduces ext4_inode_journal_mode() function because ext4_should_*_data() has already had a lot of common code and this change is putting it all into one function so it is easier to read. Successfully tested with xfstests in following configurations: delalloc + data=ordered delalloc + data=writeback data=journal nodelalloc + data=ordered nodelalloc + data=writeback nodelalloc + data=journal Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02jbd2: clear BH_Delay & BH_Unwritten in journal_unmap_bufferEric Sandeen
commit 15291164b22a357cb211b618adfef4fa82fc0de3 upstream. journal_unmap_buffer()'s zap_buffer: code clears a lot of buffer head state ala discard_buffer(), but does not touch _Delay or _Unwritten as discard_buffer() does. This can be problematic in some areas of the ext4 code which assume that if they have found a buffer marked unwritten or delay, then it's a live one. Perhaps those spots should check whether it is mapped as well, but if jbd2 is going to tear down a buffer, let's really tear it down completely. Without this I get some fsx failures on sub-page-block filesystems up until v3.2, at which point 4e96b2dbbf1d7e81f22047a50f862555a6cb87cb and 189e868fa8fdca702eb9db9d8afc46b5cb9144c9 make the failures go away, because buried within that large change is some more flag clearing. I still think it's worth doing in jbd2, since ->invalidatepage leads here directly, and it's the right place to clear away these flags. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02ext4: flush any pending end_io requests before DIO reads w/dioread_nolockJiaying Zhang
commit dccaf33fa37a1bc5d651baeb3bfeb6becb86597b upstream. (backported to 3.0 by mjt) There is a race between ext4 buffer write and direct_IO read with dioread_nolock mount option enabled. The problem is that we clear PageWriteback flag during end_io time but will do uninitialized-to-initialized extent conversion later with dioread_nolock. If an O_direct read request comes in during this period, ext4 will return zero instead of the recently written data. This patch checks whether there are any pending uninitialized-to-initialized extent conversion requests before doing O_direct read to close the race. Note that this is just a bandaid fix. The fundamental issue is that we clear PageWriteback flag before we really complete an IO, which is problem-prone. To fix the fundamental issue, we may need to implement an extent tree cache that we can use to look up pending to-be-converted extents. Signed-off-by: Jiaying Zhang <jiayingz@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02PM / Hibernate: Enable usermodehelpers in hibernate() error pathSrivatsa S. Bhat
commit 05b4877f6a4f1ba4952d1222213d262bf8c132b7 upstream. If create_basic_memory_bitmaps() fails, usermodehelpers are not re-enabled before returning. Fix this. And while at it, reword the goto labels so that they look more meaningful. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02e1000e: Avoid wrong check on TX hangJeff Kirsher
commit 09357b00255c233705b1cf6d76a8d147340545b8 upstream. Based on the original patch submitted my Michael Wang <wangyun@linux.vnet.ibm.com>. Descriptors may not be write-back while checking TX hang with flag FLAG2_DMA_BURST on. So when we detect hang, we just flush the descriptor and detect again for once. -v2 change 1 to true and 0 to false and remove extra () CC: Michael Wang <wangyun@linux.vnet.ibm.com> CC: Flavio Leitner <fbl@redhat.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5Michael Krufky
commit 9ab2393fc3e460cd2040de1483918eb17abb822f upstream. The D1F5 revision of the WinTV HVR-1900 uses a tda18271c2 tuner instead of a tda18271c1 tuner as used in revision D1E9. To account for this, we must hardcode the frontend configuration to use the same IF frequency configuration for both revisions of the device. 6MHz DVB-T is unaffected by this issue, as the recommended IF Frequency configuration for 6MHz DVB-T is the same on both c1 and c2 revisions of the tda18271 tuner. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Cc: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02lgdt330x: fix signedness error in i2c_read_demod_bytes()Xi Wang
commit 34817174fca0c5512c2d5b6ea0fc37a0337ce1d8 upstream. The error handling in lgdt3303_read_status() and lgdt330x_read_ucblocks() doesn't work, because i2c_read_demod_bytes() returns a u8 and (err < 0) is always false. err = i2c_read_demod_bytes(state, 0x58, buf, 1); if (err < 0) return err; Change the return type of i2c_read_demod_bytes() to int. Also change the return value on error to -EIO to make (err < 0) work. Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02hwmon: (fam15h_power) Correct sign extension of running_avg_captureAndreas Herrmann
commit fc0900cbda9243957d812cd6b4cc87965f9fe75f upstream. Wrong bit was used for sign extension which caused wrong end results. Thanks to Andre for spotting this bug. Reported-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02proc-ns: use d_set_d_op() API to set dentry ops in proc_ns_instantiate().Pravin B Shelar
commit 1b26c9b334044cff6d1d2698f2be41bc7d9a0864 upstream. The namespace cleanup path leaks a dentry which holds a reference count on a network namespace. Keeping that network namespace from being freed when the last user goes away. Leaving things like vlan devices in the leaked network namespace. If you use ip netns add for much real work this problem becomes apparent pretty quickly. It light testing the problem hides because frequently you simply don't notice the leak. Use d_set_d_op() so that DCACHE_OP_* flags are set correctly. This issue exists back to 3.0. Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Reported-by: Justin Pettit <jpettit@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02x86-32: Fix endless loop when processing signals for kernel tasksDmitry Adamushko
commit 29a2e2836ff9ea65a603c89df217f4198973a74f upstream. The problem occurs on !CONFIG_VM86 kernels [1] when a kernel-mode task returns from a system call with a pending signal. A real-life scenario is a child of 'khelper' returning from a failed kernel_execve() in ____call_usermodehelper() [ kernel/kmod.c ]. kernel_execve() fails due to a pending SIGKILL, which is the result of "kill -9 -1" (at least, busybox's init does it upon reboot). The loop is as follows: * syscall_exit_work: - work_pending: // start_of_the_loop - work_notify_sig: - do_notify_resume() - do_signal() - if (!user_mode(regs)) return; - resume_userspace // TIF_SIGPENDING is still set - work_pending // so we call work_pending => goto // start_of_the_loop More information can be found in another LKML thread: http://www.serverphorums.com/read.php?12,457826 [1] the problem was also seen on MIPS. Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Link: http://lkml.kernel.org/r/1332448765.2299.68.camel@dimm Cc: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02usbnet: don't clear urb->dev in tx_completetom.leiming@gmail.com
commit 5d5440a835710d09f0ef18da5000541ec98b537a upstream. URB unlinking is always racing with its completion and tx_complete may be called before or during running usb_unlink_urb, so tx_complete must not clear urb->dev since it will be used in unlink path, otherwise invalid memory accesses or usb device leak may be caused inside usb_unlink_urb. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02usbnet: increase URB reference count before usb_unlink_urbtom.leiming@gmail.com
commit 0956a8c20b23d429e79ff86d4325583fc06f9eb4 upstream. Commit 4231d47e6fe69f061f96c98c30eaf9fb4c14b96d(net/usbnet: avoid recursive locking in usbnet_stop()) fixes the recursive locking problem by releasing the skb queue lock, but it makes usb_unlink_urb racing with defer_bh, and the URB to being unlinked may be freed before or during calling usb_unlink_urb, so use-after-free problem may be triggerd inside usb_unlink_urb. The patch fixes the use-after-free problem by increasing URB reference count with skb queue lock held before calling usb_unlink_urb, so the URB won't be freed until return from usb_unlink_urb. Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oliver@neukum.org> Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02SUNRPC: We must not use list_for_each_entry_safe() in rpc_wake_up()Trond Myklebust
commit 540a0f7584169651f485e8ab67461fcb06934e38 upstream. The problem is that for the case of priority queues, we have to assume that __rpc_remove_wait_queue_priority will move new elements from the tk_wait.links lists into the queue->tasks[] list. We therefore cannot use list_for_each_entry_safe() on queue->tasks[], since that will skip these new tasks that __rpc_remove_wait_queue_priority is adding. Without this fix, rpc_wake_up and rpc_wake_up_status will both fail to wake up all functions on priority wait queues, which can result in some nasty hangs. Reported-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02UBI: fix eraseblock picking criteriaArtem Bityutskiy
commit 7eb3aa65853e1b223bfc786b023b702018cb76c0 upstream. The 'find_wl_entry()' function expects the maximum difference as the second argument, not the maximum absolute value. So the "unknown" eraseblock picking was incorrect, as Shmulik Ladkani spotted. This patch fixes the issue. Reported-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02UBI: fix error handling in ubi_scan()Richard Weinberger
commit a29852be492d61001d86c6ebf5fff9b93d7b4be9 upstream. Two bad things can happen in ubi_scan(): 1. If kmem_cache_create() fails we jump to out_si and call ubi_scan_destroy_si() which calls kmem_cache_destroy(). But si->scan_leb_slab is NULL. 2. If process_eb() fails we jump to out_vidh, call kmem_cache_destroy() and ubi_scan_destroy_si() which calls again kmem_cache_destroy(). Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02cifs: fix issue mounting of DFS ROOT when redirecting from one domain ↵Jeff Layton
controller to the next commit 1daaae8fa4afe3df78ca34e724ed7e8187e4eb32 upstream. This patch fixes an issue when cifs_mount receives a STATUS_BAD_NETWORK_NAME error during cifs_get_tcon but is able to continue after an DFS ROOT referral. In this case, the return code variable is not reset prior to trying to mount from the system referred to. Thus, is_path_accessible is not executed and the final DFS referral is not performed causing a mount error. Use case: In DNS, example.com resolves to the secondary AD server ad2.example.com Our primary domain controller is ad1.example.com and has a DFS redirection set up from \\ad1\share\Users to \\files\share\Users. Mounting \\example.com\share\Users fails. Regression introduced by commit 724d9f1. Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru Signed-off-by: Thomas Hadig <thomas@intapp.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02xfs: fix inode lookup raceDave Chinner
commit f30d500f809eca67a21704347ab14bb35877b5ee upstream. When we get concurrent lookups of the same inode that is not in the per-AG inode cache, there is a race condition that triggers warnings in unlock_new_inode() indicating that we are initialising an inode that isn't in a the correct state for a new inode. When we do an inode lookup via a file handle or a bulkstat, we don't serialise lookups at a higher level through the dentry cache (i.e. pathless lookup), and so we can get concurrent lookups of the same inode. The race condition is between the insertion of the inode into the cache in the case of a cache miss and a concurrently lookup: Thread 1 Thread 2 xfs_iget() xfs_iget_cache_miss() xfs_iread() lock radix tree radix_tree_insert() rcu_read_lock radix_tree_lookup lock inode flags XFS_INEW not set igrab() unlock inode flags rcu_read_unlock use uninitialised inode ..... lock inode flags set XFS_INEW unlock inode flags unlock radix tree xfs_setup_inode() inode flags = I_NEW unlock_new_inode() WARNING as inode flags != I_NEW This can lead to inode corruption, inode list corruption, etc, and is generally a bad thing to occur. Fix this by setting XFS_INEW before inserting the inode into the radix tree. This will ensure any concurrent lookup will find the new inode with XFS_INEW set and that forces the lookup to wait until the XFS_INEW flag is removed before allowing the lookup to succeed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02NFSv4: Return the delegation if the server returns NFS4ERR_OPENMODETrond Myklebust
commit 3114ea7a24d3264c090556a2444fc6d2c06176d4 upstream. If a setattr() fails because of an NFS4ERR_OPENMODE error, it is probably due to us holding a read delegation. Ensure that the recovery routines return that delegation in this case. Reported-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02NFS: Properly handle the case where the delegation is revokedTrond Myklebust
commit a1d0b5eebc4fd6e0edb02688b35f17f67f42aea5 upstream. If we know that the delegation stateid is bad or revoked, we need to remove that delegation as soon as possible, and then mark all the stateids that relied on that delegation for recovery. We cannot use the delegation as part of the recovery process. Also note that NFSv4.1 uses a different error code (NFS4ERR_DELEG_REVOKED) to indicate that the delegation was revoked. Finally, ensure that setlk() and setattr() can both recover safely from a revoked delegation. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02KVM: x86: fix missing checks in syscall emulationStephan Bärwolf
commit c2226fc9e87ba3da060e47333657cd6616652b84 upstream. On hosts without this patch, 32bit guests will crash (and 64bit guests may behave in a wrong way) for example by simply executing following nasm-demo-application: [bits 32] global _start SECTION .text _start: syscall (I tested it with winxp and linux - both always crashed) Disassembly of section .text: 00000000 <_start>: 0: 0f 05 syscall The reason seems a missing "invalid opcode"-trap (int6) for the syscall opcode "0f05", which is not available on Intel CPUs within non-longmodes, as also on some AMD CPUs within legacy-mode. (depending on CPU vendor, MSR_EFER and cpuid) Because previous mentioned OSs may not engage corresponding syscall target-registers (STAR, LSTAR, CSTAR), they remain NULL and (non trapping) syscalls are leading to multiple faults and finally crashs. Depending on the architecture (AMD or Intel) pretended by guests, various checks according to vendor's documentation are implemented to overcome the current issue and behave like the CPUs physical counterparts. [mtosatti: cleanup/beautify code] Signed-off-by: Stephan Baerwolf <stephan.baerwolf@tu-ilmenau.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02KVM: x86: extend "struct x86_emulate_ops" with "get_cpuid"Stephan Bärwolf
commit bdb42f5afebe208eae90406959383856ae2caf2b upstream. In order to be able to proceed checks on CPU-specific properties within the emulator, function "get_cpuid" is introduced. With "get_cpuid" it is possible to virtually call the guests "cpuid"-opcode without changing the VM's context. [mtosatti: cleanup/beautify code] Signed-off-by: Stephan Baerwolf <stephan.baerwolf@tu-ilmenau.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02firewire: ohci: fix too-early completion of IR multichannel buffersClemens Ladisch
commit 0c0efbacab8d70700d13301e0ae7975783c0cb0a upstream. handle_ir_buffer_fill() assumed that a completed descriptor would be indicated by a non-zero transfer_status (as in most other descriptors). However, this field is written by the controller as soon as (the end of) the first packet has been written into the buffer. As a consequence, if we happen to run into such a descriptor when the interrupt handler is executed after such a packet has completed, the descriptor would be taken out of the list of active descriptors as soon as the buffer had been partially filled, so the event for the buffer being completely filled would never be sent. To fix this, handle descriptors only when they have been completely filled, i.e., when res_count == 0. (This also matches the condition that is reported by the controller with an interrupt.) Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02pata_legacy: correctly mask recovery field for HT6560BSergei Shtylyov
commit 9716387311c790de381214c03e7f1b72b91a8189 upstream. According to the HT6560H datasheet, the recovery timing field is 4-bit wide, with a value of 0 meaning 16 cycles. Correct obvious thinko in the recovery field mask. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-31 20:25:20 +0000