summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-09-15iio: gp2ap020a00f: Add a driver for the deviceJacek Anaszewski
Add a new driver for the ambient light/proximity sensor device. The driver exposes three channels: light_clear light_ir and proximity. It also supports triggered buffer, high and low ambient light threshold event and proximity detection events. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-15DT: Add documentation for gp2ap020a00f sensorJacek Anaszewski
This patch adds device tree binding documentation for the gp2ap020a00f proximity/als sensor. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: Add tcs3472 color light sensor driverPeter Meerwald
chip has four 16-bit channels for red, green, blue, clear color intensity; driver supports the TCS3x7x family of devices and was tested with a TCS34725 chip; further information here: http://www.ams.com/eng/Products/Light-Sensors/Color-Sensor/TCS34725 v2 (thanks to Jonathan Cameron): * drop dynamic buffer allocation, buffer is in tcs3472_data * limit sysfs output to PAGE_SIZE * check val2 == 0 when writing CALIBSCALE Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Jon Brenner <jon.brenner@ams.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: pressure-core: st: Allow for number of channels to varyLee Jones
At the moment the number of channels specified is dictated by the first sensor supported by the driver. As we add support for more sensors this is likely to vary. Instead of using the ARRAY_SIZE() of the LPS331AP's channel specifier we'll use a new adaptable 'struct st_sensors' element instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: pressure-core: st: Expand and rename LPS331AP's channel descriptorLee Jones
Due to the MACRO used, the task of reading, understanding and maintaining the LPS331AP's channel descriptor is substantially difficult. This patch is based on the view that it's better to have easy to read, maintainable code than to save a few lines here and there. For that reason we're expanding the array so initialisation is completed in full. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: pressure-core: st: Describe LPS331AP defines by nameLee Jones
They're currently named *_1_*, for 'Sensor 1', but the code will be much more readable if we use the naming convention *_LPS331AP_* instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: sensors-core: st: Clean-up error handling in st_sensors_read_info_raw()Lee Jones
Saving a few lines of code. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: sensors-core: st: Allow full-scale to be an optional featureLee Jones
Some chips either don't support it or fail to provide adequate documentation, so sometimes it's impossible to enable the feature even if it is supported. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: Add tsl4531 ambient light sensor driverPeter Meerwald
driver for the TSL4531 family of 16-bit I2C ambient light sensors; information is here: http://www.ams.com/eng/Products/Light-Sensors/Ambient-Light-Sensor-ALS/TSL45315 the chip offers simple lux output v3 (thanks Lars-Peter Clausen): * add mutex to when updating integration time * fix chip ID checking * code cleanups v2: * rename to tsl4351 * use INT_TIME Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: adjd_s311: Use INT_TIME channel infoPeter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: Add INT_TIME (integration time) channel info attributePeter Meerwald
Integration time is in seconds; it controls the measurement time and influences the gain of a sensor. There are two typical ways that scaling is implemented in a device: 1) input amplifier, 2) reference to the ADC is changed. These both result in the accuracy of the ADC varying (by applying its sampling over a more relevant range). Integration time is a way of dealing with noise inherent in the analog sensor itself. In the case of a light sensor, a mixture of photon noise and device specific noise. Photon noise is dealt with by either improving the efficiency of the sensor, (more photons actually captured) which is not easily varied dynamically, or by integrating the measurement over a longer time period. Note that this can also be thought of as an averaging of a number of individual samples and is infact sometimes implemented this way. Altering integration time implies that the duration of a measurement changes, a fact the device's user may be interested in. Hence it makes sense to distinguish between integration time and simple scale. In some devices both types of control are present and whilst they will have similar effects on the amplitude of the reading, their effect on the noise of the measurements will differ considerably. Used by adjd_s311, tsl4531, tcs3472 The following drivers have similar controls (and could be adapted): * tsl2563 (integration time is controlled via CALIBSCALE among other things) * tsl2583 (has integration_time device_attr, but driver doesn't use channels yet) * tsl2x7x (has integration_time attr) Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Jon Brenner <jon.brenner@ams.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14staging: iio: ade7854: Use devm_iio_device_allocSachin Kamat
devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Barry Song <21cnbao@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14staging: iio: ade7759: Use devm_iio_device_allocSachin Kamat
devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Barry Song <21cnbao@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14staging: iio: ade7758_core: Use devm_iio_device_allocSachin Kamat
devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Barry Song <21cnbao@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14staging: iio: ade7754: Use devm_iio_device_allocSachin Kamat
devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Barry Song <21cnbao@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14staging: iio: ade7753: Use devm_iio_device_allocSachin Kamat
devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Barry Song <21cnbao@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14staging: iio: ad2s90: Use devm_iio_device_allocSachin Kamat
devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Graff Yang <graff.yang@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14staging: iio: ad2s1210: Use devm_iio_device_allocSachin Kamat
devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Graff Yang <graff.yang@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14staging: iio: ad2s1200: Use dev_err instead of pr_errSachin Kamat
dev_err is preferred over pr_err. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14staging: iio: ad2s1200: Use devm_* APIsSachin Kamat
devm_* APIs are device managed and make code simpler. This patch also fixes the missing gpio_free call in remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Graff Yang <graff.yang@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14staging: iio: tsl2x7x_core: Remove redundant breakSachin Kamat
'break' after return is redundant. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: dac: ad5686: Remove redundant breakSachin Kamat
'break' after return is redundant. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: gyro: adxrs450: Remove redundant breakSachin Kamat
'break' after return is redundant. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: gyro: adis16260: Remove redundant breakSachin Kamat
'break' after return is redundant. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: gyro: adis16130: Remove redundant breakSachin Kamat
'break' after return is redundant. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-11staging:iio:hmc5843: Use devm_iio_device_allocPeter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-11MAINTAINERS: Update Jonathan's email addressSachin Kamat
Updated with the current one. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-09staging:iio:adc:ad7606 remove unnecessary work pending testXie XiuQi
Remove unnecessary work pending test before calling schedule_work(). It has been tested in queue_work_on() already. No functional changed. Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Reviewed-by: Tejun Heo <tj@kernel.org> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-08iio: mxs-lradc: Add MODULE_ALIASFabio Estevam
Add MODULE_ALIAS, so that auto module loading can work. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-08iio: mxs-lradc: Fix the order of resources removalFabio Estevam
Fix the order of resources removal in the error path of mxs_lradc_probe() and also in mxs_lradc_remove(). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-08staging: iio: replace strict_strto*() with kstrto*()Jingoo Han
The usage of strict_strto*() is not preferred, because strict_strto*() is obsolete. Thus, kstrto*() should be used. Previously, there were only strict_strtol(), strict_strtoul(), strict_strtoull(), and strict_strtoll(). Thus, when converting to the variables, only long, unsigned long, unsigned long long, and long long can be used. However, kstrto*() provides various functions handling all types of variables. Therefore, the types of variables can be changed properly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07iio: adc: Add driver for Microchip MCP3422/3/4 high resolution ADCAngelo Compagnucci
Sysfs access to all channels. Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07staging: iio: hmc5843: Fix a trivial typoSachin Kamat
Add a missing closing brace. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Shubhrajyoti Datta <shubhrajyoti@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07staging: iio: tsl2x7x_core: Fix sparse warningSachin Kamat
Silences the following warning: drivers/staging/iio/light/tsl2x7x_core.c:553:70: warning: Using plain integer as NULL pointer Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: J. August Brenner <jbrenner@taosinc.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07staging: iio: tsl2x7x_core: Use devm_* APIsSachin Kamat
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: J. August Brenner <jbrenner@taosinc.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07staging: iio: ad9951: Use devm_iio_device_allocSachin Kamat
devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07staging: iio: ad9910: Use devm_iio_device_allocSachin Kamat
devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07staging: iio: ad9852: Use devm_iio_device_allocSachin Kamat
devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07staging: iio: ad9850: Use devm_iio_device_allocSachin Kamat
devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07staging: iio: ad9834: Use devm_* APIsSachin Kamat
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07staging: iio: ad9832: Use devm_* APIsSachin Kamat
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07staging: iio: ad5930: Use devm_iio_device_allocSachin Kamat
devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07staging: iio: tsl2583: Use devm_iio_device_allocSachin Kamat
devm_iio_device_alloc makes the code simple. While at it also fixed an uninitialized return with -EINVAL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: J. August Brenner <jbrenner@taosinc.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07staging: iio: ad5933: Use devm_* APIsSachin Kamat
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07staging: iio: adt7316: Use devm_* APIsSachin Kamat
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07staging: iio: lpc32xx_adc: Use devm_* APIsSachin Kamat
devm_* APIs are device managed and make code simpler. This also fixes an error in return type during clk_get failure. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Roland Stigge <stigge@antcom.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07staging: iio: ad799x_core: Use devm_* APIsSachin Kamat
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07staging: iio: ad7816: Use devm_* APIsSachin Kamat
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07staging: iio: ad7780: Use devm_* APIsSachin Kamat
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-07staging: iio: ad7606_core: Use devm_* APIsSachin Kamat
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-14 19:00:41 +0000