summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-07-27ARM: 6158/2: PL011 baudrate extension for ST-Ericssons derivativeLinus Walleij
Implementation of the ST-Ericsson baudrate extension in the PL011 block. In this modified variant it is possible to change the sampling factor from 16 to 8, and thanks to this we can get higher baudrates while still using the same peripheral clock. Also replace the simple division to determine the baud divisor with DIV_ROUND_CLOSEST() rather than a simple integer division. Cc: Alessandro Rubini <rubini@unipv.it> Cc: Jerzy Kasenberg <jerzy.kasenberg@tieto.com> Signed-off-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6157/2: PL011 TX/RX split of LCR for ST-Ericssons derivativeLinus Walleij
In the ST-Ericsson version of the PL011 the TX and RX have different control registers. Cc: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6213/1: atomic64_test: add ARM as supported architectureWill Deacon
ARM has support for the atomic64_dec_if_positive operation so ensure that it is tested by the atomic64_test routine. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27Merge branch 'origin' into miscRussell King
2010-07-27ARM: 6225/1: make TCM allocation static and common for all archsLinus Walleij
This changes the TCM handling so that a fixed area is reserved at 0xfffe0000-0xfffeffff for TCM. This areas is used by XScale but XScale does not have TCM so the mechanisms are mutually exclusive. This change is needed to make TCM detection more dynamic while still being able to compile code into it, and is a must for the unified ARM goals: the current TCM allocation at different places in memory for each machine would be a nightmare if you want to compile a single image for more than one machine with TCM so it has to be nailed down in one place. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-18ARM: 6224/1: print TCM whereabouts in init messageLinus Walleij
If TCM is in use, we should display it in the virtual memory layout along with everything else. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-18ARM: 6223/1: support multiple TCM banksLinus Walleij
CPUs v6 and up support multiple TCM banks, for example an ITCM of 8k is supplied in two 4k banks. This makes the TCM work on the 1176JZF-S devchip. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-18ARM: 6222/1: add memory types for the TCMsLinus Walleij
The earlier TCM memory regions were mapped as MT_MEMORY_UNCACHED which doesn't really work on platforms supporting the new v6 features like the NX bit. Add unique MT_MEMORY_[I|D]TCM types instead. Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-14Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6226/1: fix kprobe bug in ldr instruction emulation ARM: Update mach-types ARM: lockdep: fix unannotated irqs-on ARM: 6184/2: ux500: use neutral PRCMU base ARM: 6212/1: atomic ops: add memory constraints to inline asm ARM: 6211/1: atomic ops: fix register constraints for atomic64_add_unless ARM: 6210/1: Do not rely on reset defaults of L2X0_AUX_CTRL
2010-07-14Merge branch 'lmb-to-memblock' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'lmb-to-memblock' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: lmb: rename to memblock
2010-07-14Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/fsl-booke: Fix address issue when using relocatable kernels powerpc/cpm1: Mark micropatch code/data static and __init powerpc/cpm1: Fix build with various CONFIG_*_UCODE_PATCH combinations powerpc/cpm: Reintroduce global spi_pram struct (fixes build issue)
2010-07-14ARM: 6226/1: fix kprobe bug in ldr instruction emulationNicolas Pitre
From: Bin Yang <bin.yang@marvell.com> Cc: stable@kernel.org Signed-off-by: Bin Yang <bin.yang@marvell.com> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-14lmb: rename to memblockYinghai Lu
via following scripts FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/lmb/memblock/g' \ -e 's/LMB/MEMBLOCK/g' \ $FILES for N in $(find . -name lmb.[ch]); do M=$(echo $N | sed 's/lmb/memblock/g') mv $N $M done and remove some wrong change like lmbench and dlmb etc. also move memblock.c from lib/ to mm/ Suggested-by: Ingo Molnar <mingo@elte.hu> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-13Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: input: i8042 - add runtime check in x86's i8042_platform_init Revert "Input: fixup X86_MRST selects" Revert "Input: do not force selecting i8042 on Moorestown" x86, mrst: Add i8042_detect API for Moorestwon platform x86: Add i8042 pre-detection hook to x86_platform_ops x86, platform: Export x86_platform to modules
2010-07-13Merge branch 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MMU: flush remote tlbs when overwriting spte with different pfn KVM: VMX: Fix host MSR_KERNEL_GS_BASE corruption
2010-07-12Linux 2.6.35-rc5v2.6.35-rc5Linus Torvalds
2010-07-12Merge branch 'arm/defconfig/reduced-v2.6.35-rc1' of ↵Linus Torvalds
git://git.pengutronix.de/git/ukl/linux-2.6 * 'arm/defconfig/reduced-v2.6.35-rc1' of git://git.pengutronix.de/git/ukl/linux-2.6: ARM: reduce defconfigs This is a big change, but results in no loss of information, despite us losing almost 200k lines: 177 files changed, 652 insertions(+), 194157 deletions(-) and Grant Likely thinks powerpc can also use the same reduction technique. The python script that did the reduction looks like this: #! /usr/bin/env python # vim: set fileencoding=utf-8 : # Copyright (C) 2010 by Uwe Kleine-König <u.kleine-koenig@pengutronix.de> import re import subprocess import os import sys # This prevents including a timestamp in the .config which makes comparing a # bit easier. os.environ['KCONFIG_NOTIMESTAMP'] = 'Yes, please' # XXX: get these using getopt kernel_tree = '' # os.path.join(os.environ['HOME'], 'gsrc', 'linux-2.6') arch = 'arm' target = sys.argv[1] defconfig_src = os.path.join(kernel_tree, 'arch/%s/configs/%s' % (arch, target)) subprocess.check_call(['make', '-s', 'ARCH=%s' % arch, target]) origconfig = list(open('.config')) config = list(origconfig) config_size = os.stat('.config').st_size i = 0 while i < len(config): print 'test for %r' % config[i] defconfig = open(defconfig_src, 'w') defconfig.writelines(config[:i]) defconfig.writelines(config[i + 1:]) defconfig.close() subprocess.check_call(['make', '-s', 'ARCH=%s' % arch, target]) if os.stat('.config').st_size == config_size and list(open('.config')) == origconfig: del config[i] else: i += 1 defconfig = open(defconfig_src, 'w') defconfig.writelines(config) defconfig.close() which is pretty self-explanatory. Acked-by: Nicolas Pitre <nico@fluxnic.net> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-12Merge branch 'fix/hda' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Restore cleared pin controls on resume
2010-07-12Merge branch 'v4l_for_2.6.35' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: uvc: Fix multiple symbols definitions with UVC gadget and host drivers V4L/DVB: v4l: mem2mem_testdev: fix g_fmt NULL pointer dereference V4L/DVB: uvcvideo: Power line frequency control doesn't support GET_MIN/MAX/RES V4L/DVB: ivtv: Add delay to ensure the decoder always restarts with a blank screen V4L/DVB: Documentation: Add the Philips FQ1236 MK5 to video4linux/CARDLIST.tuner V4L/DVB: tveeprom: Add an entry for tuner code 168: a TCL M30WTP-4N-E tuner V4L/DVB: tuner: Add a definition for the Philips FQ1236 MK5 NTSC tuner V4L/DVB: OMAP_VOUT: fix: Module params were not working through bootargs V4L/DVB: OMAP_VOUT: fix: Replaced dma-sg with dma-contig V4L/DVB: OMAP_VOUT:Build FIX: Rebased against latest DSS2 changes
2010-07-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Send Report ID when numbered reports are sent over the control endpoint. HID: Enable HID_QUIRK_MULTI_INPUT for Retro Adaptor HID: add support for CH Eclipse yoke HID: eliminate a double lock in debug code HID: ntrig: add support for new firwmare versions HID: check for HID_QUIRK_IGNORE during probing HID: roccat: fix modules interdependencies
2010-07-12MAINTAINERS: fix EDAC-I7CORE file patternsJoe Perches
File patterns are one per line. Fixed include file location. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-12ARM: Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-12KVM: MMU: flush remote tlbs when overwriting spte with different pfnXiao Guangrong
After remove a rmap, we should flush all vcpu's tlb Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-07-11HID: Send Report ID when numbered reports are sent over the control endpoint.Alan Ott
The Report ID wasn't sent as part of the payload for reports which were sent over the control endpoint. This is required by section 8.1 of the HID spec. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11V4L/DVB: uvc: Fix multiple symbols definitions with UVC gadget and host driversLaurent Pinchart
The UVC gadget driver borrowed code from the UVC host driver without changing the symbol names. This results in a namespace clash with multiple definitions of several symbols when compiling both drivers in the kernel. Make all generic UVC functions and variables static in the UVC gadget driver, as the symbols are not referenced outside of the gadget driver. Rename the uvc_trace_param global variable to uvc_gadget_trace_param. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-11Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Fix autoloading of fschmd on recent Fujitsu machines hwmon: (coretemp) Properly label the sensors hwmon: (coretemp) Skip duplicate CPU entries hwmon: (it87) Fix in7 on IT8720F hwmon: (k8temp) Fix temperature reporting for ASB1 processor revisions
2010-07-11Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c/mips: Fix error return codes from Sibyte i2c bus driver i2c: Fix probability check
2010-07-11HID: Enable HID_QUIRK_MULTI_INPUT for Retro AdaptorPeter Edwards
Patch for linux-2.6.35-rc4 mainline kernel to enable Paul Qureshi's Retro Adapter [http://keio.dk/retroadapter.html], an open source USB device which allows controllers and joysticks from classic computers and consoles to work on modern PCs, to appear as two separate devices under Linux. Signed-off-by: Peter Edwards <samwise@bagshot-row.org> Acked-by: Paul Qureshi <retro@world3.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11HID: add support for CH Eclipse yokeJonathan Rockway
This USB flight yoke needs the NOGET quirk, like most of CH's other products. This patch adds that. Signed-off-by: Jonathan Rockway <jon@jrock.us> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11powerpc/fsl-booke: Fix address issue when using relocatable kernelsMatthew McClintock
When booting a relocatable kernel it needs to jump to the correct start address, which for BookE parts is usually unchanged regardless of the physical memory offset. Recent changes cause problems with how we calculate the start address, it was always adding the RMO into the start address which is incorrect. This patch only adds in the RMO offset if we are in the kexec code path, as it needs the RMO to work correctly. Instead of adding the RMO offset in in the common code path, we can just set r6 to the RMO offset in the kexec code path instead of to zero, and finally perform the masking in the common code path Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-11powerpc/cpm1: Mark micropatch code/data static and __initAnton Vorontsov
This saves runtime memory and fixes lots of sparse warnings like this: CHECK arch/powerpc/sysdev/micropatch.c arch/powerpc/sysdev/micropatch.c:27:6: warning: symbol 'patch_2000' was not declared. Should it be static? arch/powerpc/sysdev/micropatch.c:146:6: warning: symbol 'patch_2f00' was not declared. Should it be static? ... Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-11powerpc/cpm1: Fix build with various CONFIG_*_UCODE_PATCH combinationsAnton Vorontsov
Warnings are treated as errors for arch/powerpc code, so build fails with CONFIG_I2C_SPI_UCODE_PATCH=y: CC arch/powerpc/sysdev/micropatch.o cc1: warnings being treated as errors arch/powerpc/sysdev/micropatch.c: In function 'cpm_load_patch': arch/powerpc/sysdev/micropatch.c:630: warning: unused variable 'smp' make[1]: *** [arch/powerpc/sysdev/micropatch.o] Error 1 And with CONFIG_USB_SOF_UCODE_PATCH=y: CC arch/powerpc/sysdev/micropatch.o cc1: warnings being treated as errors arch/powerpc/sysdev/micropatch.c: In function 'cpm_load_patch': arch/powerpc/sysdev/micropatch.c:629: warning: unused variable 'spp' arch/powerpc/sysdev/micropatch.c:628: warning: unused variable 'iip' make[1]: *** [arch/powerpc/sysdev/micropatch.o] Error 1 This patch fixes these issues by introducing proper #ifdefs. Cc: <stable@kernel.org> [ .33, .34 ] Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-11powerpc/cpm: Reintroduce global spi_pram struct (fixes build issue)Anton Vorontsov
spi_t was removed in commit 644b2a680ccc51a9ec4d6beb12e9d47d2dee98e2 ("powerpc/cpm: Remove SPI defines and spi structs"), the commit assumed that spi_t isn't used anywhere outside of the spi_mpc8xxx driver. But it appears that the struct is needed for micropatch code. So, let's reintroduce the struct. Fixes the following build issue: CC arch/powerpc/sysdev/micropatch.o micropatch.c: In function 'cpm_load_patch': micropatch.c:629: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token micropatch.c:629: error: 'spp' undeclared (first use in this function) micropatch.c:629: error: (Each undeclared identifier is reported only once micropatch.c:629: error: for each function it appears in.) Reported-by: LEROY Christophe <christophe.leroy@c-s.fr> Reported-by: Tony Breeds <tony@bakeyournoodle.com> Cc: <stable@kernel.org> [ .33, .34 ] Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-10ARM: lockdep: fix unannotated irqs-onRussell King
CPU: Testing write buffer coherency: ok ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:3145 check_flags+0xcc/0x1dc() Modules linked in: [<c0035120>] (unwind_backtrace+0x0/0xf8) from [<c0355374>] (dump_stack+0x20/0x24) [<c0355374>] (dump_stack+0x20/0x24) from [<c0060c04>] (warn_slowpath_common+0x58/0x70) [<c0060c04>] (warn_slowpath_common+0x58/0x70) from [<c0060c3c>] (warn_slowpath_null+0x20/0x24) [<c0060c3c>] (warn_slowpath_null+0x20/0x24) from [<c008f224>] (check_flags+0xcc/0x1dc) [<c008f224>] (check_flags+0xcc/0x1dc) from [<c00945dc>] (lock_acquire+0x50/0x140) [<c00945dc>] (lock_acquire+0x50/0x140) from [<c0358434>] (_raw_spin_lock+0x50/0x88) [<c0358434>] (_raw_spin_lock+0x50/0x88) from [<c00fd114>] (set_task_comm+0x2c/0x60) [<c00fd114>] (set_task_comm+0x2c/0x60) from [<c007e184>] (kthreadd+0x30/0x108) [<c007e184>] (kthreadd+0x30/0x108) from [<c0030104>] (kernel_thread_exit+0x0/0x8) ---[ end trace 1b75b31a2719ed1c ]--- possible reason: unannotated irqs-on. irq event stamp: 3 hardirqs last enabled at (2): [<c0059bb0>] finish_task_switch+0x48/0xb0 hardirqs last disabled at (3): [<c002f0b0>] ret_slow_syscall+0xc/0x1c softirqs last enabled at (0): [<c005f3e0>] copy_process+0x394/0xe5c softirqs last disabled at (0): [<(null)>] (null) Fix this by ensuring that the lockdep interrupt state is manipulated in the appropriate places. We essentially treat userspace as an entirely separate environment which isn't relevant to lockdep (lockdep doesn't monitor userspace.) We don't tell lockdep that IRQs will be enabled in that environment. Instead, when creating kernel threads (which is a rare event compared to entering/leaving userspace) we have to update the lockdep state. Do this by starting threads with IRQs disabled, and in the kthread helper, tell lockdep that IRQs are enabled, and enable them. This provides lockdep with a consistent view of the current IRQ state in kernel space. This also revert portions of 0d928b0b616d1c5c5fe76019a87cba171ca91633 which didn't fix the problem. Tested-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-10i2c/mips: Fix error return codes from Sibyte i2c bus driverGuenter Roeck
Sibyte i2c bus driver returns non-descriptive error values. Update to return error values as defined in Documentation/i2c/fault-codes. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-07-10i2c: Fix probability checkJean Delvare
The new unified probing function differs from the original code, and the preliminary test whether probing is possible must be updated accordingly. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-07-09hwmon: Fix autoloading of fschmd on recent Fujitsu machinesJean Delvare
Fujitsu slightly changed the DMI strings in their recent machines, (for example the D2778) and this breaks the automatic loading of the needed fschmd driver. Being more tolerant on string comparison fixes the issue. This closes bug #15634: https://bugzilla.kernel.org/show_bug.cgi?id=15634 Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Sergey Spiridonov <sena@hurd.homeunix.org> Cc: Hans de Goede <hdegoede@redhat.com>
2010-07-09hwmon: (coretemp) Properly label the sensorsJean Delvare
Don't assume that CPU entry number and core ID always match. It worked in the simple cases (single CPU, no HT) but fails on multi-CPU systems. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Huaxu Wan <huaxu.wan@intel.com> Cc: stable@kernel.org
2010-07-09hwmon: (coretemp) Skip duplicate CPU entriesJean Delvare
On hyper-threaded CPUs, each core appears twice in the CPU list. Skip the second entry to avoid duplicate sensors. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Huaxu Wan <huaxu.wan@intel.com> Cc: stable@kernel.org
2010-07-09hwmon: (it87) Fix in7 on IT8720FJean Delvare
The IT8720F has no VIN7 pin, so VCCH should always be routed internally to VIN7 with an internal divider. Curiously, there still is a configuration bit to control this, which means it can be set incorrectly. And even more curiously, many boards out there are improperly configured, even though the IT8720F datasheet claims that the internal routing of VCCH to VIN7 is the default setting. So we force the internal routing in this case. It turns out that all boards with the wrong setting are from Gigabyte, so I suspect a BIOS bug. But it's easy enough to workaround in the driver, so let's do it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jean-Marc Spaggiari <jean-marc@spaggiari.org> Cc: stable@kernel.org
2010-07-09hwmon: (k8temp) Fix temperature reporting for ASB1 processor revisionsAndreas Herrmann
Reported temperature for ASB1 CPUs is too high. Add ASB1 CPU revisions (these are also non-desktop variants) to the list of CPUs for which the temperature fixup is not required. Example: (from LENOVO ThinkPad Edge 13, 01972NG, system was idle) Current kernel reports $ sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +74.0 C Core0 Temp: +70.0 C Core1 Temp: +69.0 C Core1 Temp: +70.0 C With this patch I have $ sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +54.0 C Core0 Temp: +51.0 C Core1 Temp: +48.0 C Core1 Temp: +49.0 C Cc: stable@kernel.org [.32.x .33.x, .34.x] Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-07-09ARM: 6184/2: ux500: use neutral PRCMU baseLinus Walleij
The MTU wallclock timing fix-up patch was hardwired to the DB8500 causing a regression. This makes it work on the DB5500 as well. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09ARM: 6207/1: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check for it on V6Tony Lindgren
The TLS register is only available on ARM1136 r1p0 and later. Set HWCAP_TLS flags if hardware TLS is available and test for it if CONFIG_CPU_32v6K is not set for V6. Note that we set the TLS instruction in __kuser_get_tls dynamically as suggested by Jamie Lokier <jamie@shareable.org>. Also the __switch_to code is optimized out in most cases as suggested by Nicolas Pitre <nico@fluxnic.net>. Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09ARM: 6206/1: CONFIG_FORCE_MAX_ZONEORDER update for SH-Mobile ARMMagnus Damm
Allow SH-Mobile ARM users to adjust FORCE_MAX_ZONEORDER. The Kconfig entry is taken from SH and non-4K page size stuff has been trimmed away. For now only SH-Mobile ARM is allowed to change this variable, SA1111 configs are kept at "9" and the rest at "11". CONFIG_FORCE_MAX_ZONEORDER lets the user tweak the maximum amount of physically contiguous memory that can be allocated by the kernel. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09ARM: 6203/1: Make VFPv3 usable on ARMv6Tony Lindgren
MVFR0 and MVFR1 are only available starting with ARM1136 r1p0 release according to "B.5 VFP changes" in DDI0211F_arm1136_r1p0_trm.pdf. This is also when TLS register got added, so we can use HAS_TLS also to test for MVFR0 and MVFR1. Otherwise VFPFMRX and VFPFMXR access fails and we get: Internal error: Oops - undefined instruction: 0 [#1] PC is at no_old_VFP_process+0x8/0x3c LR is at __und_svc+0x48/0x80 ... Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09ARM: 6199/1: Add kprobe-based event tracerWill Deacon
This patch enables the HAVE_REGS_AND_STACK_ACCESS_API option for ARM which is required by the kprobe events tracer. Code based on the PowerPC port. Cc: Jean Pihet <jpihet@mvista.com> Tested-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09ARM: 6198/1: perf probe: Add ARM DWARF register number mappingsWill Deacon
This patch adds mappings from DWARF register numbers to the register names used by the ARM `Regs and Stack Access API'. Cc: Jean Pihet <jpihet@mvista.com> Tested-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09ARM: 6197/2: preliminary support for sparse IRQeric miao
So to allow NR_IRQS to be dynamic and platforms to specify the number of IRQs really needed. Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09ARM: 6212/1: atomic ops: add memory constraints to inline asmWill Deacon
Currently, the 32-bit and 64-bit atomic operations on ARM do not include memory constraints in the inline assembly blocks. In the case of barrier-less operations [for example, atomic_add], this means that the compiler may constant fold values which have actually been modified by a call to an atomic operation. This issue can be observed in the atomic64_test routine in <kernel root>/lib/atomic64_test.c: 00000000 <test_atomic64>: 0: e1a0c00d mov ip, sp 4: e92dd830 push {r4, r5, fp, ip, lr, pc} 8: e24cb004 sub fp, ip, #4 c: e24dd008 sub sp, sp, #8 10: e24b3014 sub r3, fp, #20 14: e30d000d movw r0, #53261 ; 0xd00d 18: e3011337 movw r1, #4919 ; 0x1337 1c: e34c0001 movt r0, #49153 ; 0xc001 20: e34a1aa3 movt r1, #43683 ; 0xaaa3 24: e16300f8 strd r0, [r3, #-8]! 28: e30c0afe movw r0, #51966 ; 0xcafe 2c: e30b1eef movw r1, #48879 ; 0xbeef 30: e34d0eaf movt r0, #57007 ; 0xdeaf 34: e34d1ead movt r1, #57005 ; 0xdead 38: e1b34f9f ldrexd r4, [r3] 3c: e1a34f90 strexd r4, r0, [r3] 40: e3340000 teq r4, #0 44: 1afffffb bne 38 <test_atomic64+0x38> 48: e59f0004 ldr r0, [pc, #4] ; 54 <test_atomic64+0x54> 4c: e3a0101e mov r1, #30 50: ebfffffe bl 0 <__bug> 54: 00000000 .word 0x00000000 The atomic64_set (0x38-0x44) writes to the atomic64_t, but the compiler doesn't see this, assumes the test condition is always false and generates an unconditional branch to __bug. The rest of the test is optimised away. This patch adds suitable memory constraints to the atomic operations on ARM to ensure that the compiler is informed of the correct data hazards. We have to use the "Qo" constraints to avoid hitting the GCC anomaly described at http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44492 , where the compiler makes assumptions about the writeback in the addressing mode used by the inline assembly. These constraints forbid the use of auto{inc,dec} addressing modes, so it doesn't matter if we don't use the operand exactly once. Cc: stable@kernel.org Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09ARM: 6211/1: atomic ops: fix register constraints for atomic64_add_unlessWill Deacon
The atomic64_add_unless function compares an atomic variable with a given value and, if they are not equal, adds another given value to the atomic variable. The function returns zero if the addition did not occur and non-zero otherwise. On ARM, the return value is initialised to 1 in C code. Inline assembly code then performs the atomic64_add_unless operation, setting the return value to 0 iff the addition does not occur. This means that when the addition *does* occur, the value of ret must be preserved across the inline assembly and therefore requires a "+r" constraint rather than the current one of "=&r". Thanks to Nicolas Pitre for helping to spot this. Cc: stable@kernel.org Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-06 09:25:31 +0000