summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-04-22Linux 3.13.11v3.13.11Greg Kroah-Hartman
2014-04-22exit: call disassociate_ctty() before exit_task_namespaces()Oleg Nesterov
commit c39df5fa37b0623589508c95515b4aa1531c524e upstream. Commit 8aac62706ada ("move exit_task_namespaces() outside of exit_notify()") breaks pppd and the exiting service crashes the kernel: BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: ppp_register_channel+0x13/0x20 [ppp_generic] Call Trace: ppp_asynctty_open+0x12b/0x170 [ppp_async] tty_ldisc_open.isra.2+0x27/0x60 tty_ldisc_hangup+0x1e3/0x220 __tty_hangup+0x2c4/0x440 disassociate_ctty+0x61/0x270 do_exit+0x7f2/0xa50 ppp_register_channel() needs ->net_ns and current->nsproxy == NULL. Move disassociate_ctty() before exit_task_namespaces(), it doesn't make sense to delay it after perf_event_exit_task() or cgroup_exit(). This also allows to use task_work_add() inside the (nontrivial) code paths in disassociate_ctty(). Investigated by Peter Hurley. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Sree Harsha Totakura <sreeharsha@totakura.in> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Sree Harsha Totakura <sreeharsha@totakura.in> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrey Vagin <avagin@openvz.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22wait: fix reparent_leader() vs EXIT_DEAD->EXIT_ZOMBIE raceOleg Nesterov
commit dfccbb5e49a621c1b21a62527d61fc4305617aca upstream. wait_task_zombie() first does EXIT_ZOMBIE->EXIT_DEAD transition and drops tasklist_lock. If this task is not the natural child and it is traced, we change its state back to EXIT_ZOMBIE for ->real_parent. The last transition is racy, this is even documented in 50b8d257486a "ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE race". wait_consider_task() tries to detect this transition and clear ->notask_error but we can't rely on ptrace_reparented(), debugger can exit and do ptrace_unlink() before its sub-thread sets EXIT_ZOMBIE. And there is another problem which were missed before: this transition can also race with reparent_leader() which doesn't reset >exit_signal if EXIT_DEAD, assuming that this task must be reaped by someone else. So the tracee can be re-parented with ->exit_signal != SIGCHLD, and if /sbin/init doesn't use __WALL it becomes unreapable. Change reparent_leader() to update ->exit_signal even if EXIT_DEAD. Note: this is the simple temporary hack for -stable, it doesn't try to solve all problems, it will be reverted by the next changes. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jan Kratochvil <jan.kratochvil@redhat.com> Reported-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Michal Schmidt <mschmidt@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Lennart Poettering <lpoetter@redhat.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22sparc64: Make sure %pil interrupts are enabled during hypervisor yield.David S. Miller
[ Upstream commit cb3042d609e30e6144024801c89be3925106752b ] In arch_cpu_idle() we must enable %pil based interrupts before potentially invoking the hypervisor cpu yield call. As per the Hypervisor API documentation for cpu_yield: Interrupts which are blocked by some mechanism other that pstate.ie (for example %pil) are not guaranteed to cause a return from this service. It seems that only first generation Niagara chips are hit by this bug. My best guess is that later chips implement this in hardware and wake up anyways from %pil events, whereas in first generation chips the yield is implemented completely in hypervisor code and requires %pil to be enabled in order to wake properly from this call. Fixes: 87fa05aeb3a5 ("sparc: Use generic idle loop") Reported-by: Fabio M. Di Nitto <fabbione@fabbione.net> Reported-by: Jan Engelhardt <jengelh@inai.de> Tested-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22sparc64: don't treat 64-bit syscall return codes as 32-bitDave Kleikamp
[ Upstream commit 1535bd8adbdedd60a0ee62e28fd5225d66434371 ] When checking a system call return code for an error, linux_sparc_syscall was sign-extending the lower 32-bit value and comparing it to -ERESTART_RESTARTBLOCK. lseek can return valid return codes whose lower 32-bits alone would indicate a failure (such as 4G-1). Use the whole 64-bit value to check for errors. Only the 32-bit path should sign extend the lower 32-bit value. Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Acked-by: Bob Picco <bob.picco@oracle.com> Acked-by: Allen Pais <allen.pais@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22sparc32: fix build failure for arch_jump_label_transformPaul Gortmaker
[ Upstream commit 4f6500fff5f7644a03c46728fd7ef0f62fa6940b ] In arch/sparc/Kernel/Makefile, we see: obj-$(CONFIG_SPARC64) += jump_label.o However, the Kconfig selects HAVE_ARCH_JUMP_LABEL unconditionally for all SPARC. This in turn leads to the following failure when doing allmodconfig coverage builds: kernel/built-in.o: In function `__jump_label_update': jump_label.c:(.text+0x8560c): undefined reference to `arch_jump_label_transform' kernel/built-in.o: In function `arch_jump_label_transform_static': (.text+0x85cf4): undefined reference to `arch_jump_label_transform' make: *** [vmlinux] Error 1 Change HAVE_ARCH_JUMP_LABEL to be conditional on SPARC64 so that it matches the Makefile. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22jffs2: remove from wait queue after schedule()Li Zefan
commit 3ead9578443b66ddb3d50ed4f53af8a0c0298ec5 upstream. @wait is a local variable, so if we don't remove it from the wait queue list, later wake_up() may end up accessing invalid memory. This was spotted by eyes. Signed-off-by: Li Zefan <lizefan@huawei.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22jffs2: avoid soft-lockup in jffs2_reserve_space_gc()Li Zefan
commit 13b546d96207c131eeae15dc7b26c6e7d0f1cad7 upstream. We triggered soft-lockup under stress test on 2.6.34 kernel. BUG: soft lockup - CPU#1 stuck for 60009ms! [lockf2.test:14488] ... [<bf09a4d4>] (jffs2_do_reserve_space+0x420/0x440 [jffs2]) [<bf09a528>] (jffs2_reserve_space_gc+0x34/0x78 [jffs2]) [<bf0a1350>] (jffs2_garbage_collect_dnode.isra.3+0x264/0x478 [jffs2]) [<bf0a2078>] (jffs2_garbage_collect_pass+0x9c0/0xe4c [jffs2]) [<bf09a670>] (jffs2_reserve_space+0x104/0x2a8 [jffs2]) [<bf09dc48>] (jffs2_write_inode_range+0x5c/0x4d4 [jffs2]) [<bf097d8c>] (jffs2_write_end+0x198/0x2c0 [jffs2]) [<c00e00a4>] (generic_file_buffered_write+0x158/0x200) [<c00e14f4>] (__generic_file_aio_write+0x3a4/0x414) [<c00e15c0>] (generic_file_aio_write+0x5c/0xbc) [<c012334c>] (do_sync_write+0x98/0xd4) [<c0123a84>] (vfs_write+0xa8/0x150) [<c0123d74>] (sys_write+0x3c/0xc0)] Fix this by adding a cond_resched() in the while loop. [akpm@linux-foundation.org: don't initialize `ret'] Signed-off-by: Li Zefan <lizefan@huawei.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22jffs2: Fix crash due to truncation of csizeAjesh Kunhipurayil Vijayan
commit 41bf1a24c1001f4d0d41a78e1ac575d2f14789d7 upstream. mounting JFFS2 partition sometimes crashes with this call trace: [ 1322.240000] Kernel bug detected[#1]: [ 1322.244000] Cpu 2 [ 1322.244000] $ 0 : 0000000000000000 0000000000000018 000000003ff00070 0000000000000001 [ 1322.252000] $ 4 : 0000000000000000 c0000000f3980150 0000000000000000 0000000000010000 [ 1322.260000] $ 8 : ffffffffc09cd5f8 0000000000000001 0000000000000088 c0000000ed300de8 [ 1322.268000] $12 : e5e19d9c5f613a45 ffffffffc046d464 0000000000000000 66227ba5ea67b74e [ 1322.276000] $16 : c0000000f1769c00 c0000000ed1e0200 c0000000f3980150 0000000000000000 [ 1322.284000] $20 : c0000000f3a80000 00000000fffffffc c0000000ed2cfbd8 c0000000f39818f0 [ 1322.292000] $24 : 0000000000000004 0000000000000000 [ 1322.300000] $28 : c0000000ed2c0000 c0000000ed2cfab8 0000000000010000 ffffffffc039c0b0 [ 1322.308000] Hi : 000000000000023c [ 1322.312000] Lo : 000000000003f802 [ 1322.316000] epc : ffffffffc039a9f8 check_tn_node+0x88/0x3b0 [ 1322.320000] Not tainted [ 1322.324000] ra : ffffffffc039c0b0 jffs2_do_read_inode_internal+0x1250/0x1e48 [ 1322.332000] Status: 5400f8e3 KX SX UX KERNEL EXL IE [ 1322.336000] Cause : 00800034 [ 1322.340000] PrId : 000c1004 (Netlogic XLP) [ 1322.344000] Modules linked in: [ 1322.348000] Process jffs2_gcd_mtd7 (pid: 264, threadinfo=c0000000ed2c0000, task=c0000000f0e68dd8, tls=0000000000000000) [ 1322.356000] Stack : c0000000f1769e30 c0000000ed010780 c0000000ed010780 c0000000ed300000 c0000000f1769c00 c0000000f3980150 c0000000f3a80000 00000000fffffffc c0000000ed2cfbd8 ffffffffc039c0b0 ffffffffc09c6340 0000000000001000 0000000000000dec ffffffffc016c9d8 c0000000f39805a0 c0000000f3980180 0000008600000000 0000000000000000 0000000000000000 0000000000000000 0001000000000dec c0000000f1769d98 c0000000ed2cfb18 0000000000010000 0000000000010000 0000000000000044 c0000000f3a80000 c0000000f1769c00 c0000000f3d207a8 c0000000f1769d98 c0000000f1769de0 ffffffffc076f9c0 0000000000000009 0000000000000000 0000000000000000 ffffffffc039cf90 0000000000000017 ffffffffc013fbdc 0000000000000001 000000010003e61c ... [ 1322.424000] Call Trace: [ 1322.428000] [<ffffffffc039a9f8>] check_tn_node+0x88/0x3b0 [ 1322.432000] [<ffffffffc039c0b0>] jffs2_do_read_inode_internal+0x1250/0x1e48 [ 1322.440000] [<ffffffffc039cf90>] jffs2_do_crccheck_inode+0x70/0xd0 [ 1322.448000] [<ffffffffc03a1b80>] jffs2_garbage_collect_pass+0x160/0x870 [ 1322.452000] [<ffffffffc03a392c>] jffs2_garbage_collect_thread+0xdc/0x1f0 [ 1322.460000] [<ffffffffc01541c8>] kthread+0xb8/0xc0 [ 1322.464000] [<ffffffffc0106d18>] kernel_thread_helper+0x10/0x18 [ 1322.472000] [ 1322.472000] Code: 67bd0050 94a4002c 2c830001 <00038036> de050218 2403fffc 0080a82d 00431824 24630044 [ 1322.480000] ---[ end trace b052bb90e97dfbf5 ]--- The variable csize in structure jffs2_tmp_dnode_info is of type uint16_t, but it is used to hold the compressed data length(csize) which is declared as uint32_t. So, when the value of csize exceeds 16bits, it gets truncated when assigned to tn->csize. This is causing a kernel BUG. Changing the definition of csize in jffs2_tmp_dnode_info to uint32_t fixes the issue. Signed-off-by: Ajesh Kunhipurayil Vijayan <ajesh@broadcom.com> Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22jffs2: Fix segmentation fault found in stress testKamlakant Patel
commit 3367da5610c50e6b83f86d366d72b41b350b06a2 upstream. Creating a large file on a JFFS2 partition sometimes crashes with this call trace: [ 306.476000] CPU 13 Unable to handle kernel paging request at virtual address c0000000dfff8002, epc == ffffffffc03a80a8, ra == ffffffffc03a8044 [ 306.488000] Oops[#1]: [ 306.488000] Cpu 13 [ 306.492000] $ 0 : 0000000000000000 0000000000000000 0000000000008008 0000000000008007 [ 306.500000] $ 4 : c0000000dfff8002 000000000000009f c0000000e0007cde c0000000ee95fa58 [ 306.508000] $ 8 : 0000000000000001 0000000000008008 0000000000010000 ffffffffffff8002 [ 306.516000] $12 : 0000000000007fa9 000000000000ff0e 000000000000ff0f 80e55930aebb92bb [ 306.524000] $16 : c0000000e0000000 c0000000ee95fa5c c0000000efc80000 ffffffffc09edd70 [ 306.532000] $20 : ffffffffc2b60000 c0000000ee95fa58 0000000000000000 c0000000efc80000 [ 306.540000] $24 : 0000000000000000 0000000000000004 [ 306.548000] $28 : c0000000ee950000 c0000000ee95f738 0000000000000000 ffffffffc03a8044 [ 306.556000] Hi : 00000000000574a5 [ 306.560000] Lo : 6193b7a7e903d8c9 [ 306.564000] epc : ffffffffc03a80a8 jffs2_rtime_compress+0x98/0x198 [ 306.568000] Tainted: G W [ 306.572000] ra : ffffffffc03a8044 jffs2_rtime_compress+0x34/0x198 [ 306.580000] Status: 5000f8e3 KX SX UX KERNEL EXL IE [ 306.584000] Cause : 00800008 [ 306.588000] BadVA : c0000000dfff8002 [ 306.592000] PrId : 000c1100 (Netlogic XLP) [ 306.596000] Modules linked in: [ 306.596000] Process dd (pid: 170, threadinfo=c0000000ee950000, task=c0000000ee6e0858, tls=0000000000c47490) [ 306.608000] Stack : 7c547f377ddc7ee4 7ffc7f967f5d7fae 7f617f507fc37ff4 7e7d7f817f487f5f 7d8e7fec7ee87eb3 7e977ff27eec7f9e 7d677ec67f917f67 7f3d7e457f017ed7 7fd37f517f867eb2 7fed7fd17ca57e1d 7e5f7fe87f257f77 7fd77f0d7ede7fdb 7fba7fef7e197f99 7fde7fe07ee37eb5 7f5c7f8c7fc67f65 7f457fb87f847e93 7f737f3e7d137cd9 7f8e7e9c7fc47d25 7dbb7fac7fb67e52 7ff17f627da97f64 7f6b7df77ffa7ec5 80057ef17f357fb3 7f767fa27dfc7fd5 7fe37e8e7fd07e53 7e227fcf7efb7fa1 7f547e787fa87fcc 7fcb7fc57f5a7ffb 7fc07f6c7ea97e80 7e2d7ed17e587ee0 7fb17f9d7feb7f31 7f607e797e887faa 7f757fdd7c607ff3 7e877e657ef37fbd 7ec17fd67fe67ff7 7ff67f797ff87dc4 7eef7f3a7c337fa6 7fe57fc97ed87f4b 7ebe7f097f0b8003 7fe97e2a7d997cba 7f587f987f3c7fa9 ... [ 306.676000] Call Trace: [ 306.680000] [<ffffffffc03a80a8>] jffs2_rtime_compress+0x98/0x198 [ 306.684000] [<ffffffffc0394f10>] jffs2_selected_compress+0x110/0x230 [ 306.692000] [<ffffffffc039508c>] jffs2_compress+0x5c/0x388 [ 306.696000] [<ffffffffc039dc58>] jffs2_write_inode_range+0xd8/0x388 [ 306.704000] [<ffffffffc03971bc>] jffs2_write_end+0x16c/0x2d0 [ 306.708000] [<ffffffffc01d3d90>] generic_file_buffered_write+0xf8/0x2b8 [ 306.716000] [<ffffffffc01d4e7c>] __generic_file_aio_write+0x1ac/0x350 [ 306.720000] [<ffffffffc01d50a0>] generic_file_aio_write+0x80/0x168 [ 306.728000] [<ffffffffc021f7dc>] do_sync_write+0x94/0xf8 [ 306.732000] [<ffffffffc021ff6c>] vfs_write+0xa4/0x1a0 [ 306.736000] [<ffffffffc02202e8>] SyS_write+0x50/0x90 [ 306.744000] [<ffffffffc0116cc0>] handle_sys+0x180/0x1a0 [ 306.748000] [ 306.748000] Code: 020b202d 0205282d 90a50000 <90840000> 14a40038 00000000 0060602d 0000282d 016c5823 [ 306.760000] ---[ end trace 79dd088435be02d0 ]--- Segmentation fault This crash is caused because the 'positions' is declared as an array of signed short. The value of position is in the range 0..65535, and will be converted to a negative number when the position is greater than 32767 and causes a corruption and crash. Changing the definition to 'unsigned short' fixes this issue Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22ext4: fix premature freeing of partial clusters split across leaf blocksEric Whitney
commit ad6599ab3ac98a4474544086e048ce86ec15a4d1 upstream. Xfstests generic/311 and shared/298 fail when run on a bigalloc file system. Kernel error messages produced during the tests report that blocks to be freed are already on the to-be-freed list. When e2fsck is run at the end of the tests, it typically reports bad i_blocks and bad free blocks counts. The bug that causes these failures is located in ext4_ext_rm_leaf(). Code at the end of the function frees a partial cluster if it's not shared with an extent remaining in the leaf. However, if all the extents in the leaf have been removed, the code dereferences an invalid extent pointer (off the front of the leaf) when the check for sharing is made. This generally has the effect of unconditionally freeing the partial cluster, which leads to the observed failures when the partial cluster is shared with the last extent in the next leaf. Fix this by attempting to free the cluster only if extents remain in the leaf. Any remaining partial cluster will be freed if possible when the next leaf is processed or when leaf removal is complete. Signed-off-by: Eric Whitney <enwlinux@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22ext4: fix partial cluster handling for bigalloc file systemsEric Whitney
commit c06344939422bbd032ac967223a7863de57496b5 upstream. Commit 9cb00419fa, which enables hole punching for bigalloc file systems, exposed a bug introduced by commit 6ae06ff51e in an earlier release. When run on a bigalloc file system, xfstests generic/013, 068, 075, 083, 091, 100, 112, 127, 263, 269, and 270 fail with e2fsck errors or cause kernel error messages indicating that previously freed blocks are being freed again. The latter commit optimizes the selection of the starting extent in ext4_ext_rm_leaf() when hole punching by beginning with the extent supplied in the path argument rather than with the last extent in the leaf node (as is still done when truncating). However, the code in rm_leaf that initially sets partial_cluster to track cluster sharing on extent boundaries is only guaranteed to run if rm_leaf starts with the last node in the leaf. Consequently, partial_cluster is not correctly initialized when hole punching, and a cluster on the boundary of a punched region that should be retained may instead be deallocated. Signed-off-by: Eric Whitney <enwlinux@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22ext4: fix error return from ext4_ext_handle_uninitialized_extents()Eric Whitney
commit ce37c42919608e96ade3748fe23c3062a0a966c5 upstream. Commit 3779473246 breaks the return of error codes from ext4_ext_handle_uninitialized_extents() in ext4_ext_map_blocks(). A portion of the patch assigns that function's signed integer return value to an unsigned int. Consequently, negatively valued error codes are lost and can be treated as a bogus allocated block count. Signed-off-by: Eric Whitney <enwlinux@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22Btrfs: fix deadlock with nested trans handlesJosef Bacik
commit 3bbb24b20a8800158c33eca8564f432dd14d0bf3 upstream. Zach found this deadlock that would happen like this btrfs_end_transaction <- reduce trans->use_count to 0 btrfs_run_delayed_refs btrfs_cow_block find_free_extent btrfs_start_transaction <- increase trans->use_count to 1 allocate chunk btrfs_end_transaction <- decrease trans->use_count to 0 btrfs_run_delayed_refs lock tree block we are cowing above ^^ We need to only decrease trans->use_count if it is above 1, otherwise leave it alone. This will make nested trans be the only ones who decrease their added ref, and will let us get rid of the trans->use_count++ hack if we have to commit the transaction. Thanks, Reported-by: Zach Brown <zab@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Tested-by: Zach Brown <zab@redhat.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22Btrfs: skip submitting barrier for missing deviceHidetoshi Seto
commit f88ba6a2a44ee98e8d59654463dc157bb6d13c43 upstream. I got an error on v3.13: BTRFS error (device sdf1) in write_all_supers:3378: errno=-5 IO failure (errors while submitting device barriers.) how to reproduce: > mkfs.btrfs -f -d raid1 /dev/sdf1 /dev/sdf2 > wipefs -a /dev/sdf2 > mount -o degraded /dev/sdf1 /mnt > btrfs balance start -f -sconvert=single -mconvert=single -dconvert=single /mnt The reason of the error is that barrier_all_devices() failed to submit barrier to the missing device. However it is clear that we cannot do anything on missing device, and also it is not necessary to care chunks on the missing device. This patch stops sending/waiting barrier if device is missing. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22xfs: fix directory hash ordering bugMark Tinguely
commit c88547a8119e3b581318ab65e9b72f27f23e641d upstream. Commit f5ea1100 ("xfs: add CRCs to dir2/da node blocks") introduced in 3.10 incorrectly converted the btree hash index array pointer in xfs_da3_fixhashpath(). It resulted in the the current hash always being compared against the first entry in the btree rather than the current block index into the btree block's hash entry array. As a result, it was comparing the wrong hashes, and so could misorder the entries in the btree. For most cases, this doesn't cause any problems as it requires hash collisions to expose the ordering problem. However, when there are hash collisions within a directory there is a very good probability that the entries will be ordered incorrectly and that actually matters when duplicate hashes are placed into or removed from the btree block hash entry array. This bug results in an on-disk directory corruption and that results in directory verifier functions throwing corruption warnings into the logs. While no data or directory entries are lost, access to them may be compromised, and attempts to remove entries from a directory that has suffered from this corruption may result in a filesystem shutdown. xfs_repair will fix the directory hash ordering without data loss occuring. [dchinner: wrote useful a commit message] Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22bdi: avoid oops on device removalJan Kara
commit 5acda9d12dcf1ad0d9a5a2a7c646de3472fa7555 upstream. After commit 839a8e8660b6 ("writeback: replace custom worker pool implementation with unbound workqueue") when device is removed while we are writing to it we crash in bdi_writeback_workfn() -> set_worker_desc() because bdi->dev is NULL. This can happen because even though bdi_unregister() cancels all pending flushing work, nothing really prevents new ones from being queued from balance_dirty_pages() or other places. Fix the problem by clearing BDI_registered bit in bdi_unregister() and checking it before scheduling of any flushing work. Fixes: 839a8e8660b6777e7fe4e80af1a048aebe2b5977 Reviewed-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Cc: Derek Basehore <dbasehore@chromium.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22backing_dev: fix hung task on syncDerek Basehore
commit 6ca738d60c563d5c6cf6253ee4b8e76fa77b2b9e upstream. bdi_wakeup_thread_delayed() used the mod_delayed_work() function to schedule work to writeback dirty inodes. The problem with this is that it can delay work that is scheduled for immediate execution, such as the work from sync_inodes_sb(). This can happen since mod_delayed_work() can now steal work from a work_queue. This fixes the problem by using queue_delayed_work() instead. This is a regression caused by commit 839a8e8660b6 ("writeback: replace custom worker pool implementation with unbound workqueue"). The reason that this causes a problem is that laptop-mode will change the delay, dirty_writeback_centisecs, to 60000 (10 minutes) by default. In the case that bdi_wakeup_thread_delayed() races with sync_inodes_sb(), sync will be stopped for 10 minutes and trigger a hung task. Even if dirty_writeback_centisecs is not long enough to cause a hung task, we still don't want to delay sync for that long. We fix the problem by using queue_delayed_work() when we want to schedule writeback sometime in future. This function doesn't change the timer if it is already armed. For the same reason, we also change bdi_writeback_workfn() to immediately queue the work again in the case that the work_list is not empty. The same problem can happen if the sync work is run on the rescue worker. [jack@suse.cz: update changelog, add comment, use bdi_wakeup_thread_delayed()] Signed-off-by: Derek Basehore <dbasehore@chromium.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zento.linux.org.uk> Reviewed-by: Tejun Heo <tj@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Derek Basehore <dbasehore@chromium.org> Cc: Kees Cook <keescook@chromium.org> Cc: Benson Leung <bleung@chromium.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Luigi Semenzato <semenzato@chromium.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22ima: restore the original behavior for sending data with ima templateRoberto Sassu
commit c019e307ad82a8ee652b8ccbacf69ae94263b07b upstream. With the new template mechanism introduced in IMA since kernel 3.13, the format of data sent through the binary_runtime_measurements interface is slightly changed. Now, for a generic measurement, the format of template data (after the template name) is: template_len | field1_len | field1 | ... | fieldN_len | fieldN In addition, fields containing a string now include the '\0' termination character. Instead, the format for the 'ima' template should be: SHA1 digest | event name length | event name It must be noted that while in the IMA 3.13 code 'event name length' is 'IMA_EVENT_NAME_LEN_MAX + 1' (256 bytes), so that the template digest is calculated correctly, and 'event name' contains '\0', in the pre 3.13 code 'event name length' is exactly the string length and 'event name' does not contain the termination character. The patch restores the behavior of the IMA code pre 3.13 for the 'ima' template so that legacy userspace tools obtain a consistent behavior when receiving data from the binary_runtime_measurements interface regardless of which kernel version is used. Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22Bluetooth: Fix removing Long Term KeyClaudio Takahasi
commit 5981a8821b774ada0be512fd9bad7c241e17657e upstream. This patch fixes authentication failure on LE link re-connection when BlueZ acts as slave (peripheral). LTK is removed from the internal list after its first use causing PIN or Key missing reply when re-connecting the link. The LE Long Term Key Request event indicates that the master is attempting to encrypt or re-encrypt the link. Pre-condition: BlueZ host paired and running as slave. How to reproduce(master): 1) Establish an ACL LE encrypted link 2) Disconnect the link 3) Try to re-establish the ACL LE encrypted link (fails) > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete (0x01) Status: Success (0x00) Handle: 64 Role: Slave (0x01) ... @ Device Connected: 00:02:72:DC:29:C9 (1) flags 0x0000 > HCI Event: LE Meta Event (0x3e) plen 13 LE Long Term Key Request (0x05) Handle: 64 Random number: 875be18439d9aa37 Encryption diversifier: 0x76ed < HCI Command: LE Long Term Key Request Reply (0x08|0x001a) plen 18 Handle: 64 Long term key: 2aa531db2fce9f00a0569c7d23d17409 > HCI Event: Command Complete (0x0e) plen 6 LE Long Term Key Request Reply (0x08|0x001a) ncmd 1 Status: Success (0x00) Handle: 64 > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 64 Encryption: Enabled with AES-CCM (0x01) ... @ Device Disconnected: 00:02:72:DC:29:C9 (1) reason 3 < HCI Command: LE Set Advertise Enable (0x08|0x000a) plen 1 Advertising: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 LE Set Advertise Enable (0x08|0x000a) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete (0x01) Status: Success (0x00) Handle: 64 Role: Slave (0x01) ... @ Device Connected: 00:02:72:DC:29:C9 (1) flags 0x0000 > HCI Event: LE Meta Event (0x3e) plen 13 LE Long Term Key Request (0x05) Handle: 64 Random number: 875be18439d9aa37 Encryption diversifier: 0x76ed < HCI Command: LE Long Term Key Request Neg Reply (0x08|0x001b) plen 2 Handle: 64 > HCI Event: Command Complete (0x0e) plen 6 LE Long Term Key Request Neg Reply (0x08|0x001b) ncmd 1 Status: Success (0x00) Handle: 64 > HCI Event: Disconnect Complete (0x05) plen 4 Status: Success (0x00) Handle: 64 Reason: Authentication Failure (0x05) @ Device Disconnected: 00:02:72:DC:29:C9 (1) reason 0 Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22pid_namespace: pidns_get() should check task_active_pid_ns() != NULLOleg Nesterov
commit d23082257d83e4bc89727d5aedee197e907999d2 upstream. pidns_get()->get_pid_ns() can hit ns == NULL. This task_struct can't go away, but task_active_pid_ns(task) is NULL if release_task(task) was already called. Alternatively we could change get_pid_ns(ns) to check ns != NULL, but it seems that other callers are fine. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Eric W. Biederman ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22SCSI: sd: don't fail if the device doesn't recognize SYNCHRONIZE CACHEAlan Stern
commit 7aae51347b21eb738dc1981df1365b57a6c5ee4e upstream. Evidently some wacky USB-ATA bridges don't recognize the SYNCHRONIZE CACHE command, as shown in this email thread: http://marc.info/?t=138978356200002&r=1&w=2 The fact that we can't tell them to drain their caches shouldn't prevent the system from going into suspend. Therefore sd_sync_cache() shouldn't return an error if the device replies with an Invalid Command ASC. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Sven Neumann <s.neumann@raumfeld.com> Tested-by: Daniel Mack <zonque@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22tty: Fix low_latency BUGPeter Hurley
commit a9c3f68f3cd8d55f809fbdb0c138ed061ea1bd25 upstream. The user-settable knob, low_latency, has been the source of several BUG reports which stem from flush_to_ldisc() running in interrupt context. Since 3.12, which added several sleeping locks (termios_rwsem and buf->lock) to the input processing path, the frequency of these BUG reports has increased. Note that changes in 3.12 did not introduce this regression; sleeping locks were first added to the input processing path with the removal of the BKL from N_TTY in commit a88a69c91256418c5907c2f1f8a0ec0a36f9e6cc, 'n_tty: Fix loss of echoed characters and remove bkl from n_tty' and later in commit 38db89799bdf11625a831c5af33938dcb11908b6, 'tty: throttling race fix'. Since those changes, executing flush_to_ldisc() in interrupt_context (ie, low_latency set), is unsafe. However, since most devices do not validate if the low_latency setting is appropriate for the context (process or interrupt) in which they receive data, some reports are due to misconfiguration. Further, serial dma devices for which dma fails, resort to interrupt receiving as a backup without resetting low_latency. Historically, low_latency was used to force wake-up the reading process rather than wait for the next scheduler tick. The effect was to trim multiple milliseconds of latency from when the process would receive new data. Recent tests [1] have shown that the reading process now receives data with only 10's of microseconds latency without low_latency set. Remove the low_latency rx steering from tty_flip_buffer_push(); however, leave the knob as an optional hint to drivers that can tune their rx fifos and such like. Cleanup stale code comments regarding low_latency. [1] https://lkml.org/lkml/2014/2/20/434 "Yay.. thats an annoying historical pain in the butt gone." -- Alan Cox Reported-by: Beat Bolli <bbolli@ewanet.ch> Reported-by: Pavel Roskin <proski@gnu.org> Acked-by: David Sterba <dsterba@suse.cz> Cc: Grant Edwards <grant.b.edwards@gmail.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Hal Murray <murray+fedora@ip-64-139-1-69.sjc.megapath.net> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22tty: Set correct tty name in 'active' sysfs attributeHannes Reinecke
commit 723abd87f6e536f1353c8f64f621520bc29523a3 upstream. The 'active' sysfs attribute should refer to the currently active tty devices the console is running on, not the currently active console. The console structure doesn't refer to any device in sysfs, only the tty the console is running on has. So we need to print out the tty names in 'active', not the console names. There is one special-case, which is tty0. If the console is directed to it, we want 'tty0' to show up in the file, so user-space knows that the messages get forwarded to the active VT. The ->device() callback would resolve tty0, though. Hence, treat it special and don't call into the VT layer to resolve it (plymouth is known to depend on it). Cc: Lennart Poettering <lennart@poettering.net> Cc: Kay Sievers <kay@vrfy.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Werner Fink <werner@suse.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22staging: comedi: 8255_pci: initialize MITE data windowIan Abbott
commit 268d1e799663b795cba15c64f5d29407786a9dd4 upstream. According to National Instruments' PCI-DIO-96/PXI-6508/PCI-6503 User Manual, the physical address in PCI BAR1 needs to be OR'ed with 0x80 and written to register offset 0xC0 in the "MITE" registers (BAR0). Do so during initialization of the National Instruments boards handled by the "8255_pci" driver. The boards were previously handled by the "ni_pcidio" driver, where the initialization was done by `mite_setup()` in the "mite" module. The "mite" module comes with too much extra baggage for the "8255_pci" driver to deal with so use a local, simpler initialization function. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabledBjorn Helgaas
commit 866d54177b4e671cd52bed1fb487d140d7b691f5 upstream. Andreas reported that after 1f42db786b14 ("PCI: Enable INTx if BIOS left them disabled"), pciehp surprise removal stopped working. This happens because pci_reenable_device() on the hotplug bridge (used in the pciehp_configure_device() path) clears the Interrupt Disable bit, which apparently breaks the bridge's MSI hotplug event reporting. Previously we cleared the Interrupt Disable bit in do_pci_enable_device(), which is used by both pci_enable_device() and pci_reenable_device(). But we use pci_reenable_device() after the driver may have enabled MSI or MSI-X, and we *set* Interrupt Disable as part of enabling MSI/MSI-X. This patch clears Interrupt Disable only when MSI/MSI-X has not been enabled. Fixes: 1f42db786b14 PCI: Enable INTx if BIOS left them disabled Link: https://bugzilla.kernel.org/show_bug.cgi?id=71691 Reported-and-tested-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22ACPI / button: Add ACPI Button event via netlink routineLan Tianyu
commit 0bf6368ee8f25826d0645c0f7a4f17c8845356a4 upstream. Commit 1696d9d (ACPI: Remove the old /proc/acpi/event interface) removed ACPI Button event which originally was sent to userspace via /proc/acpi/event. This caused ACPI shutdown regression on gentoo in VirtualBox. Now ACPI events are sent to userspace via netlink, so add ACPI Button event back via netlink routine. References: https://bugzilla.kernel.org/show_bug.cgi?id=71721 Reported-and-tested-by: Richard Musil <richard.musil@gmail.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22PCI: designware: Fix iATU programming for cfg1, io and mem viewportMohit Kumar
commit 017fcdc30cdae18c0946eef1ece1f14b4c7897ba upstream. This patch corrects iATU programming for cfg1, io and mem viewport. Enable ATU only after configuring it. Signed-off-by: Mohit Kumar <mohit.kumar@st.com> Signed-off-by: Ajay Khandelwal <ajay.khandelwal@st.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22PCI: designware: Fix RC BAR to be single 64-bit non-prefetchable memory BARMohit Kumar
commit dbffdd6862e67d60703f2df66c558bf448f81d6e upstream. The Synopsys PCIe core provides one pair of 32-bit BARs (BAR 0 and BAR 1). The BARs can be configured as follows: - One 64-bit BAR: BARs 0 and 1 are combined to form a single 64-bit BAR - Two 32-bit BARs: BARs 0 and 1 are two independent 32-bit BARs This patch corrects 64-bit, non-prefetchable memory BAR configuration implemented in dw driver. Signed-off-by: Mohit Kumar <mohit.kumar@st.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Pratyush Anand <pratyush.anand@st.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22x86: Adjust irq remapping quirk for older revisions of 5500/5520 chipsetsNeil Horman
commit 6f8a1b335fde143b7407036e2368d3cd6eb55674 upstream. Commit 03bbcb2e7e2 (iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets) properly disables irq remapping on the 5500/5520 chipsets that don't correctly perform that feature. However, when I wrote it, I followed the errata sheet linked in that commit too closely, and explicitly tied the activation of the quirk to revision 0x13 of the chip, under the assumption that earlier revisions were not in the field. Recently a system was reported to be suffering from this remap bug and the quirk hadn't triggered, because the revision id register read at a lower value that 0x13, so the quirk test failed improperly. Given this, it seems only prudent to adjust this quirk so that any revision less than 0x13 has the quirk asserted. [ tglx: Removed the 0x12 comparison of pci id 3405 as this is covered by the <= 0x13 check already ] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/1394649873-14913-1-git-send-email-nhorman@tuxdriver.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22x86, hyperv: Bypass the timer_irq_works() checkJason Wang
commit ca3ba2a2f4a49a308e7d78c784d51b2332064f15 upstream. This patch bypass the timer_irq_works() check for hyperv guest since: - It was guaranteed to work. - timer_irq_works() may fail sometime due to the lpj calibration were inaccurate in a hyperv guest or a buggy host. In the future, we should get the tsc frequency from hypervisor and use preset lpj instead. [ hpa: I would prefer to not defer things to "the future" in the future... ] Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: http://lkml.kernel.org/r/1393558229-14755-1-git-send-email-jasowang@redhat.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22Char: ipmi_bt_sm, fix infinite loopJiri Slaby
commit a94cdd1f4d30f12904ab528152731fb13a812a16 upstream. In read_all_bytes, we do unsigned char i; ... bt->read_data[0] = BMC2HOST; bt->read_count = bt->read_data[0]; ... for (i = 1; i <= bt->read_count; i++) bt->read_data[i] = BMC2HOST; If bt->read_data[0] == bt->read_count == 255, we loop infinitely in the 'for' loop. Make 'i' an 'int' instead of 'char' to get rid of the overflow and finish the loop after 255 iterations every time. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-and-debugged-by: Rui Hui Dian <rhdian@novell.com> Cc: Tomas Cech <tcech@suse.cz> Cc: Corey Minyard <minyard@acm.org> Cc: <openipmi-developer@lists.sourceforge.net> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-22user namespace: fix incorrect memory barriersMikulas Patocka
commit e79323bd87808fdfbc68ce6c5371bd224d9672ee upstream. smp_read_barrier_depends() can be used if there is data dependency between the readers - i.e. if the read operation after the barrier uses address that was obtained from the read operation before the barrier. In this file, there is only control dependency, no data dependecy, so the use of smp_read_barrier_depends() is incorrect. The code could fail in the following way: * the cpu predicts that idx < entries is true and starts executing the body of the for loop * the cpu fetches map->extent[0].first and map->extent[0].count * the cpu fetches map->nr_extents * the cpu verifies that idx < extents is true, so it commits the instructions in the body of the for loop The problem is that in this scenario, the cpu read map->extent[0].first and map->nr_extents in the wrong order. We need a full read memory barrier to prevent it. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14Linux 3.13.10v3.13.10Greg Kroah-Hartman
2014-04-14crypto: ghash-clmulni-intel - use C implementation for setkey()Ard Biesheuvel
commit 8ceee72808d1ae3fb191284afc2257a2be964725 upstream. The GHASH setkey() function uses SSE registers but fails to call kernel_fpu_begin()/kernel_fpu_end(). Instead of adding these calls, and then having to deal with the restriction that they cannot be called from interrupt context, move the setkey() implementation to the C domain. Note that setkey() does not use any particular SSE features and is not expected to become a performance bottleneck. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Fixes: 0e1227d356e9b (crypto: ghash - Add PCLMULQDQ accelerated implementation) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14m68k: Skip futex_atomic_cmpxchg_inatomic() testFinn Thain
commit e571c58f313d35c56e0018470e3375ddd1fd320e upstream. Skip the futex_atomic_cmpxchg_inatomic() test in futex_init(). It causes a fatal exception on 68030 (and presumably 68020 also). Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1403061006440.5525@nippy.intranet Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() testHeiko Carstens
commit 03b8c7b623c80af264c4c8d6111e5c6289933666 upstream. If an architecture has futex_atomic_cmpxchg_inatomic() implemented and there is no runtime check necessary, allow to skip the test within futex_init(). This allows to get rid of some code which would always give the same result, and also allows the compiler to optimize a couple of if statements away. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/20140302120947.GA3641@osiris Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [geert: Backported to v3.10..v3.13] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14ARC: [nsimosci] Unbork consoleVineet Gupta
commit 61fb4bfc010b0d2940f7fd87acbce6a0f03217cb upstream. Despite the switch to right UART driver (prev patch), serial console still doesn't work due to missing CONFIG_SERIAL_OF_PLATFORM Also fix the default cmdline in DT to not refer to out-of-tree ARC framebuffer driver for console. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <Francois.Bedard@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14ARC: [nsimosci] Change .dts to use generic 8250 UARTMischa Jonker
commit 6eda477b3c54b8236868c8784e5e042ff14244f0 upstream. The Synopsys APB DW UART has a couple of special features that are not in the System C model. In 3.8, the 8250_dw driver didn't really use these features, but from 3.9 onwards, the 8250_dw driver has become incompatible with our model. Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <Francois.Bedard@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14powernow-k6: reorder frequenciesMikulas Patocka
commit 22c73795b101597051924556dce019385a1e2fa0 upstream. This patch reorders reported frequencies from the highest to the lowest, just like in other frequency drivers. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14powernow-k6: correctly initialize default parametersMikulas Patocka
commit d82b922a4acc1781d368aceac2f9da43b038cab2 upstream. The powernow-k6 driver used to read the initial multiplier from the powernow register. However, there is a problem with this: * If there was a frequency transition before, the multiplier read from the register corresponds to the current multiplier. * If there was no frequency transition since reset, the field in the register always reads as zero, regardless of the current multiplier that is set using switches on the mainboard and that the CPU is running at. The zero value corresponds to multiplier 4.5, so as a consequence, the powernow-k6 driver always assumes multiplier 4.5. For example, if we have 550MHz CPU with bus frequency 100MHz and multiplier 5.5, the powernow-k6 driver thinks that the multiplier is 4.5 and bus frequency is 122MHz. The powernow-k6 driver then sets the multiplier to 4.5, underclocking the CPU to 450MHz, but reports the current frequency as 550MHz. There is no reliable way how to read the initial multiplier. I modified the driver so that it contains a table of known frequencies (based on parameters of existing CPUs and some common overclocking schemes) and sets the multiplier according to the frequency. If the frequency is unknown (because of unusual overclocking or underclocking), the user must supply the bus speed and maximum multiplier as module parameters. This patch should be backported to all stable kernels. If it doesn't apply cleanly, change it, or ask me to change it. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14powernow-k6: disable cache when changing frequencyMikulas Patocka
commit e20e1d0ac02308e2211306fc67abcd0b2668fb8b upstream. I found out that a system with k6-3+ processor is unstable during network server load. The system locks up or the network card stops receiving. The reason for the instability is the CPU frequency scaling. During frequency transition the processor is in "EPM Stop Grant" state. The documentation says that the processor doesn't respond to inquiry requests in this state. Consequently, coherency of processor caches and bus master devices is not maintained, causing the system instability. This patch flushes the cache during frequency transition. It fixes the instability. Other minor changes: * u64 invalue changed to unsigned long because the variable is 32-bit * move the logic to set the multiplier to a separate function powernow_k6_set_cpu_multiplier * preserve lower 5 bits of the powernow port instead of 4 (the voltage field has 5 bits) * mask interrupts when reading the multiplier, so that the port is not open during other activity (running other kernel code with the port open shouldn't cause any misbehavior, but we should better be safe and keep the port closed) This patch should be backported to all stable kernels. If it doesn't apply cleanly, change it, or ask me to change it. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14rds: prevent dereference of a NULL device in rds_iw_laddr_checkSasha Levin
[ Upstream commit bf39b4247b8799935ea91d90db250ab608a58e50 ] Binding might result in a NULL device which is later dereferenced without checking. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14isdnloop: several buffer overflowsDan Carpenter
[ Upstream commit 7563487cbf865284dcd35e9ef5a95380da046737 ] There are three buffer overflows addressed in this patch. 1) In isdnloop_fake_err() we add an 'E' to a 60 character string and then copy it into a 60 character buffer. I have made the destination buffer 64 characters and I'm changed the sprintf() to a snprintf(). 2) In isdnloop_parse_cmd(), p points to a 6 characters into a 60 character buffer so we have 54 characters. The ->eazlist[] is 11 characters long. I have modified the code to return if the source buffer is too long. 3) In isdnloop_command() the cbuf[] array was 60 characters long but the max length of the string then can be up to 79 characters. I made the cbuf array 80 characters long and changed the sprintf() to snprintf(). I also removed the temporary "dial" buffer and changed it to use "p" directly. Unfortunately, we pass the "cbuf" string from isdnloop_command() to isdnloop_writecmd() which truncates anything over 60 characters to make it fit in card->omsg[]. (It can accept values up to 255 characters so long as there is a '\n' character every 60 characters). For now I have just fixed the memory corruption bug and left the other problems in this driver alone. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14isdnloop: Validate NUL-terminated strings from user.YOSHIFUJI Hideaki
[ Upstream commit 77bc6bed7121936bb2e019a8c336075f4c8eef62 ] Return -EINVAL unless all of user-given strings are correctly NUL-terminated. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14net: vxlan: fix crash when interface is created with no groupMike Rapoport
[ Upstream commit 5933a7bbb5de66482ea8aa874a7ebaf8e67603c4 ] If the vxlan interface is created without explicit group definition, there are corner cases which may cause kernel panic. For instance, in the following scenario: node A: $ ip link add dev vxlan42 address 2c:c2:60:00:10:20 type vxlan id 42 $ ip addr add dev vxlan42 10.0.0.1/24 $ ip link set up dev vxlan42 $ arp -i vxlan42 -s 10.0.0.2 2c:c2:60:00:01:02 $ bridge fdb add dev vxlan42 to 2c:c2:60:00:01:02 dst <IPv4 address> $ ping 10.0.0.2 node B: $ ip link add dev vxlan42 address 2c:c2:60:00:01:02 type vxlan id 42 $ ip addr add dev vxlan42 10.0.0.2/24 $ ip link set up dev vxlan42 $ arp -i vxlan42 -s 10.0.0.1 2c:c2:60:00:10:20 node B crashes: vxlan42: 2c:c2:60:00:10:20 migrated from 4011:eca4:c0a8:6466:c0a8:6415:8e09:2118 to (invalid address) vxlan42: 2c:c2:60:00:10:20 migrated from 4011:eca4:c0a8:6466:c0a8:6415:8e09:2118 to (invalid address) BUG: unable to handle kernel NULL pointer dereference at 0000000000000046 IP: [<ffffffff8143c459>] ip6_route_output+0x58/0x82 PGD 7bd89067 PUD 7bd4e067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.14.0-rc8-hvx-xen-00019-g97a5221-dirty #154 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff88007c774f50 ti: ffff88007c79c000 task.ti: ffff88007c79c000 RIP: 0010:[<ffffffff8143c459>] [<ffffffff8143c459>] ip6_route_output+0x58/0x82 RSP: 0018:ffff88007fd03668 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff8186a000 RCX: 0000000000000040 RDX: 0000000000000000 RSI: ffff88007b0e4a80 RDI: ffff88007fd03754 RBP: ffff88007fd03688 R08: ffff88007b0e4a80 R09: 0000000000000000 R10: 0200000a0100000a R11: 0001002200000000 R12: ffff88007fd03740 R13: ffff88007b0e4a80 R14: ffff88007b0e4a80 R15: ffff88007bba0c50 FS: 0000000000000000(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000046 CR3: 000000007bb60000 CR4: 00000000000006e0 Stack: 0000000000000000 ffff88007fd037a0 ffffffff8186a000 ffff88007fd03740 ffff88007fd036c8 ffffffff814320bb 0000000000006e49 ffff88007b8b7360 ffff88007bdbf200 ffff88007bcbc000 ffff88007b8b7000 ffff88007b8b7360 Call Trace: <IRQ> [<ffffffff814320bb>] ip6_dst_lookup_tail+0x2d/0xa4 [<ffffffff814322a5>] ip6_dst_lookup+0x10/0x12 [<ffffffff81323b4e>] vxlan_xmit_one+0x32a/0x68c [<ffffffff814a325a>] ? _raw_spin_unlock_irqrestore+0x12/0x14 [<ffffffff8104c551>] ? lock_timer_base.isra.23+0x26/0x4b [<ffffffff8132451a>] vxlan_xmit+0x66a/0x6a8 [<ffffffff8141a365>] ? ipt_do_table+0x35f/0x37e [<ffffffff81204ba2>] ? selinux_ip_postroute+0x41/0x26e [<ffffffff8139d0c1>] dev_hard_start_xmit+0x2ce/0x3ce [<ffffffff8139d491>] __dev_queue_xmit+0x2d0/0x392 [<ffffffff813b380f>] ? eth_header+0x28/0xb5 [<ffffffff8139d569>] dev_queue_xmit+0xb/0xd [<ffffffff813a5aa6>] neigh_resolve_output+0x134/0x152 [<ffffffff813db741>] ip_finish_output2+0x236/0x299 [<ffffffff813dc074>] ip_finish_output+0x98/0x9d [<ffffffff813dc749>] ip_output+0x62/0x67 [<ffffffff813da9f2>] dst_output+0xf/0x11 [<ffffffff813dc11c>] ip_local_out+0x1b/0x1f [<ffffffff813dcf1b>] ip_send_skb+0x11/0x37 [<ffffffff813dcf70>] ip_push_pending_frames+0x2f/0x33 [<ffffffff813ff732>] icmp_push_reply+0x106/0x115 [<ffffffff813ff9e4>] icmp_reply+0x142/0x164 [<ffffffff813ffb3b>] icmp_echo.part.16+0x46/0x48 [<ffffffff813c1d30>] ? nf_iterate+0x43/0x80 [<ffffffff813d8037>] ? xfrm4_policy_check.constprop.11+0x52/0x52 [<ffffffff813ffb62>] icmp_echo+0x25/0x27 [<ffffffff814005f7>] icmp_rcv+0x1d2/0x20a [<ffffffff813d8037>] ? xfrm4_policy_check.constprop.11+0x52/0x52 [<ffffffff813d810d>] ip_local_deliver_finish+0xd6/0x14f [<ffffffff813d8037>] ? xfrm4_policy_check.constprop.11+0x52/0x52 [<ffffffff813d7fde>] NF_HOOK.constprop.10+0x4c/0x53 [<ffffffff813d82bf>] ip_local_deliver+0x4a/0x4f [<ffffffff813d7f7b>] ip_rcv_finish+0x253/0x26a [<ffffffff813d7d28>] ? inet_add_protocol+0x3e/0x3e [<ffffffff813d7fde>] NF_HOOK.constprop.10+0x4c/0x53 [<ffffffff813d856a>] ip_rcv+0x2a6/0x2ec [<ffffffff8139a9a0>] __netif_receive_skb_core+0x43e/0x478 [<ffffffff812a346f>] ? virtqueue_poll+0x16/0x27 [<ffffffff8139aa2f>] __netif_receive_skb+0x55/0x5a [<ffffffff8139aaaa>] process_backlog+0x76/0x12f [<ffffffff8139add8>] net_rx_action+0xa2/0x1ab [<ffffffff81047847>] __do_softirq+0xca/0x1d1 [<ffffffff81047ace>] irq_exit+0x3e/0x85 [<ffffffff8100b98b>] do_IRQ+0xa9/0xc4 [<ffffffff814a37ad>] common_interrupt+0x6d/0x6d <EOI> [<ffffffff810378db>] ? native_safe_halt+0x6/0x8 [<ffffffff810110c7>] default_idle+0x9/0xd [<ffffffff81011694>] arch_cpu_idle+0x13/0x1c [<ffffffff8107480d>] cpu_startup_entry+0xbc/0x137 [<ffffffff8102e741>] start_secondary+0x1a0/0x1a5 Code: 24 14 e8 f1 e5 01 00 31 d2 a8 32 0f 95 c2 49 8b 44 24 2c 49 0b 44 24 24 74 05 83 ca 04 eb 1c 4d 85 ed 74 17 49 8b 85 a8 02 00 00 <66> 8b 40 46 66 c1 e8 07 83 e0 07 c1 e0 03 09 c2 4c 89 e6 48 89 RIP [<ffffffff8143c459>] ip6_route_output+0x58/0x82 RSP <ffff88007fd03668> CR2: 0000000000000046 ---[ end trace 4612329caab37efd ]--- When vxlan interface is created without explicit group definition, the default_dst protocol family is initialiazed to AF_UNSPEC and the driver assumes IPv4 configuration. On the other side, the default_dst protocol family is used to differentiate between IPv4 and IPv6 cases and, since, AF_UNSPEC != AF_INET, the processing takes the IPv6 path. Making the IPv4 assumption explicit by settting default_dst protocol family to AF_INET4 and preventing mixing of IPv4 and IPv6 addresses in snooped fdb entries fixes the corner case crashes. Signed-off-by: Mike Rapoport <mike.rapoport@ravellosystems.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14Call efx_set_channels() before efx->type->dimension_resources()Daniel Pieczko
[ Upstream commit 52ad762b85ed7947ec9eff6b036eb985352f6874 ] When using the "separate_tx_channels=1" module parameter, the TX queues are initially numbered starting from the first TX-only channel number (after all the RX-only channels). efx_set_channels() renumbers the queues so that they are indexed from zero. On EF10, the TX queues need to be relabelled in this way before calling the dimension_resources NIC type operation, otherwise the TX queue PIO buffers can be linked to the wrong VIs when using "separate_tx_channels=1". Added comments to explain UC/WC mappings for PIO buffers Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14xen-netback: disable rogue vif in kthread contextWei Liu
[ Upstream commit e9d8b2c2968499c1f96563e6522c56958d5a1d0d ] When netback discovers frontend is sending malformed packet it will disables the interface which serves that frontend. However disabling a network interface involving taking a mutex which cannot be done in softirq context, so we need to defer this process to kthread context. This patch does the following: 1. introduce a flag to indicate the interface is disabled. 2. check that flag in TX path, don't do any work if it's true. 3. check that flag in RX path, turn off that interface if it's true. The reason to disable it in RX path is because RX uses kthread. After this change the behavior of netback is still consistent -- it won't do any TX work for a rogue frontend, and the interface will be eventually turned off. Also change a "continue" to "break" after xenvif_fatal_tx_err, as it doesn't make sense to continue processing packets if frontend is rogue. This is a fix for XSA-90. Reported-by: Török Edwin <edwin@etorok.net> Signed-off-by: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14netlink: don't compare the nul-termination in nla_strcmpPablo Neira
[ Upstream commit 8b7b932434f5eee495b91a2804f5b64ebb2bc835 ] nla_strcmp compares the string length plus one, so it's implicitly including the nul-termination in the comparison. int nla_strcmp(const struct nlattr *nla, const char *str) { int len = strlen(str) + 1; ... d = memcmp(nla_data(nla), str, len); However, if NLA_STRING is used, userspace can send us a string without the nul-termination. This is a problem since the string comparison will not match as the last byte may be not the nul-termination. Fix this by skipping the comparison of the nul-termination if the attribute data is nul-terminated. Suggested by Thomas Graf. Cc: Florian Westphal <fw@strlen.de> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14ipv6: some ipv6 statistic counters failed to disable bhHannes Frederic Sowa
[ Upstream commit 43a43b6040165f7b40b5b489fe61a4cb7f8c4980 ] After commit c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify processing to workqueue") some counters are now updated in process context and thus need to disable bh before doing so, otherwise deadlocks can happen on 32-bit archs. Fabio Estevam noticed this while while mounting a NFS volume on an ARM board. As a compensation for missing this I looked after the other *_STATS_BH and found three other calls which need updating: 1) icmp6_send: ip6_fragment -> icmpv6_send -> icmp6_send (error handling) 2) ip6_push_pending_frames: rawv6_sendmsg -> rawv6_push_pending_frames -> ... (only in case of icmp protocol with raw sockets in error handling) 3) ping6_v6_sendmsg (error handling) Fixes: c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify processing to workqueue") Reported-by: Fabio Estevam <festevam@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-27 11:18:31 +0000