summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-16Linux 3.14-rc7v3.14-rc7Linus Torvalds
2014-03-16Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Three small fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/clock: Prevent tracing recursion in sched_clock_cpu() stop_machine: Fix^2 race between stop_two_cpus() and stop_cpus() sched/deadline: Deny unprivileged users to set/change SCHED_DEADLINE policy
2014-03-16Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc smaller fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix leak in uncore_type_init failure paths perf machine: Use map as success in ip__resolve_ams perf symbols: Fix crash in elf_section_by_name perf trace: Decode architecture-specific signal numbers
2014-03-16ipc: Fix 2 bugs in msgrcv() MSG_COPY implementationMichael Kerrisk
While testing and documenting the msgrcv() MSG_COPY flag that Stanislav Kinsbursky added in commit 4a674f34ba04 ("ipc: introduce message queue copy feature" => kernel 3.8), I discovered a couple of bugs in the implementation. The two bugs concern MSG_COPY interactions with other msgrcv() flags, namely: (A) MSG_COPY + MSG_EXCEPT (B) MSG_COPY + !IPC_NOWAIT The bugs are distinct (and the fix for the first one is obvious), however my fix for both is a single-line patch, which is why I'm combining them in a single mail, rather than writing two mails+patches. ===== (A) MSG_COPY + MSG_EXCEPT ===== With the addition of the MSG_COPY flag, there are now two msgrcv() flags--MSG_COPY and MSG_EXCEPT--that modify the meaning of the 'msgtyp' argument in unrelated ways. Specifying both in the same call is a logical error that is currently permitted, with the effect that MSG_COPY has priority and MSG_EXCEPT is ignored. The call should give an error if both flags are specified. The patch below implements that behavior. ===== (B) (B) MSG_COPY + !IPC_NOWAIT ===== The test code that was submitted in commit 3a665531a3b7 ("selftests: IPC message queue copy feature test") shows MSG_COPY being used in conjunction with IPC_NOWAIT. In other words, if there is no message at the position 'msgtyp'. return immediately with the error in ENOMSG. What was not (fully) tested is the behavior if MSG_COPY is specified *without* IPC_NOWAIT, and there is an odd behavior. If the queue contains less than 'msgtyp' messages, then the call blocks until the next message is written to the queue. At that point, the msgrcv() call returns a copy of the newly added message, regardless of whether that message is at the ordinal position 'msgtyp'. This is clearly bogus, and problematic for applications that might want to make use of the MSG_COPY flag. I considered the following possible solutions to this problem: (1) Force the call to block until a message *does* appear at the position 'msgtyp'. (2) If the MSG_COPY flag is specified, the kernel should implicitly add IPC_NOWAIT, so that the call fails with ENOMSG for this case. (3) If the MSG_COPY flag is specified, but IPC_NOWAIT is not, generate an error (probably, EINVAL is the right one). I do not know if any application would really want to have the functionality of solution (1), especially since an application can determine in advance the number of messages in the queue using msgctl() IPC_STAT. Obviously, this solution would be the most work to implement. Solution (2) would have the effect of silently fixing any applications that tried to employ broken behavior. However, it would mean that if we later decided to implement solution (1), then user-space could not easily detect what the kernel supports (but, since I'm somewhat doubtful that solution (1) is needed, I'm not sure that this is much of a problem). Solution (3) would have the effect of informing broken applications that they are doing something broken. The downside is that this would cause a ABI breakage for any applications that are currently employing the broken behavior. However: a) Those applications are almost certainly not getting the results they expect. b) Possibly, those applications don't even exist, because MSG_COPY is currently hidden behind CONFIG_CHECKPOINT_RESTORE. The upside of solution (3) is that if we later decided to implement solution (1), user-space could determine what the kernel supports, via the error return. In my view, solution (3) is mildly preferable to solution (2), and solution (1) could still be done later if anyone really cares. The patch below implements solution (3). PS. For anyone out there still listening, it's the usual story: documenting an API (and the thinking about, and the testing of the API, that documentation entails) is the one of the single best ways of finding bugs in the API, as I've learned from a lot of experience. Best to do that documentation before releasing the API. Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: stable@vger.kernel.org Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-15Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of six fixes. Two are instant crash/null deref types (storvsc and isci). The two qla2xxx are initialisation problems that cause MSI-X failures and card misdetection, the isci erroneous macro is actually illegal C that's causing a miscompile with certain gcc versions and the be2iscsi bad if expression is a static checker fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] storvsc: NULL pointer dereference fix [SCSI] qla2xxx: Poll during initialization for ISP25xx and ISP83xx [SCSI] isci: correct erroneous for_each_isci_host macro [SCSI] isci: fix reset timeout handling [SCSI] be2iscsi: fix bad if expression [SCSI] qla2xxx: Fix multiqueue MSI-X registration.
2014-03-14Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "Two x86 fixes: Suresh's eager FPU fix, and a fix to the NUMA quirk for AMD northbridges. This only includes Suresh's fix patch, not the "mostly a cleanup" patch which had __init issues" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/amd/numa: Fix northbridge quirk to assign correct NUMA node x86, fpu: Check tsk_used_math() in kernel_fpu_end() for eager FPU
2014-03-14Merge tag 'pm+acpi-3.14-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "Three of these are regression fixes, for two recent regressions and one introduced during the 3.13 cycle, and the fourth one is a working version of the fix that had to be reverted last time. Specifics: - A recent ACPI resources handling fix overlooked the fact that it had to update the ACPI PNP subsystem's resources parsing too and caused confusing warning messages to be printed during system intialization on some systems (with arguably buggy ACPI tables). Fix from Zhang Rui. - Moving the early ACPI initialization before timekeeping_init() earlier in this cycle broke fast TSC calibration on at least one system, so it needs to be done later, but still before efi_enter_virtual_mode() to allow the EFI initialization to refer to ACPI. - A change related to code duplication reduction in the cpufreq core inadvertently caused cpufreq intialization to fail for some CPUs handled by intel_pstate by adding checks that may fail for that driver, but aren't even necessary when it is used. The issue is addressed by preventing those checks from run in the configurations in which they aren't needed. - If the Hardware Reduced ACPI flag is set in the ACPI tables, system suspend, hibernation and ACPI power off will only work when special sleep control and sleep status registeres are provided (their addresses in the ACPI tables are not zero). If those registers are not available, the features in question have no chances to work, so they shouldn't even be regarded as supported. That helps with power off in particular, because alternative power off methods may be used then and they may actually work" * tag 'pm+acpi-3.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / sleep: Add extra checks for HW Reduced ACPI mode sleep states ACPI / init: Invoke early ACPI initialization later cpufreq: Skip current frequency initialization for ->setpolicy drivers PNP / ACPI: proper handling of ACPI IO/Memory resource parsing failures
2014-03-14Merge tag 'dm-3.14-fixes-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device-mapper fixes form Mike Snitzer: "Two small fixes for the DM cache target: - fix corruption with >2TB fast device due to truncation bug - fix access beyond end of origin device due to a partial block" * tag 'dm-3.14-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: fix access beyond end of origin device dm cache: fix truncation bug when copying a block to/from >2TB fast device
2014-03-14x86/amd/numa: Fix northbridge quirk to assign correct NUMA nodeDaniel J Blueman
For systems with multiple servers and routed fabric, all northbridges get assigned to the first server. Fix this by also using the node reported from the PCI bus. For single-fabric systems, the northbriges are on PCI bus 0 by definition, which are on NUMA node 0 by definition, so this is invarient on most systems. Tested on fam10h and fam15h single and multi-fabric systems and candidate for stable. Signed-off-by: Daniel J Blueman <daniel@numascale.com> Acked-by: Steffen Persvold <sp@numascale.com> Acked-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1394710981-3596-1-git-send-email-daniel@numascale.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-13Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Pretty minor set of fixes for radeon, ttm and vmwgfx. The ttm ones are a regression and an oops seen on server chipsets" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: Fix a surface reference corner-case in legacy emulation mode drm/radeon/cik: properly set compute ring status on disable drm/radeon/cik: stop the sdma engines in the enable() function drm/radeon/cik: properly set sdma ring status on disable drm/radeon: fix runpm disabling on non-PX harder drm/ttm: don't oops if no invalidate_caches() drm/ttm: Work around performance regression with VM_PFNMAP
2014-03-13Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c Kconfig fix from Wolfram Sang. * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Remove usage of orphaned symbol OF_I2C
2014-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "I know this is a bit more than you want to see, and I've told the wireless folks under no uncertain terms that they must severely scale back the extent of the fixes they are submitting this late in the game. Anyways: 1) vmxnet3's netpoll doesn't perform the equivalent of an ISR, which is the correct implementation, like it should. Instead it does something like a NAPI poll operation. This leads to crashes. From Neil Horman and Arnd Bergmann. 2) Segmentation of SKBs requires proper socket orphaning of the fragments, otherwise we might access stale state released by the release callbacks. This is a 5 patch fix, but the initial patches are giving variables and such significantly clearer names such that the actual fix itself at the end looks trivial. From Michael S. Tsirkin. 3) TCP control block release can deadlock if invoked from a timer on an already "owned" socket. Fix from Eric Dumazet. 4) In the bridge multicast code, we must validate that the destination address of general queries is the link local all-nodes multicast address. From Linus Lüssing. 5) The x86 BPF JIT support for negative offsets puts the parameter for the helper function call in the wrong register. Fix from Alexei Starovoitov. 6) The descriptor type used for RTL_GIGA_MAC_VER_17 chips in the r8169 driver is incorrect. Fix from Hayes Wang. 7) The xen-netback driver tests skb_shinfo(skb)->gso_type bits to see if a packet is a GSO frame, but that's not the correct test. It should use skb_is_gso(skb) instead. Fix from Wei Liu. 8) Negative msg->msg_namelen values should generate an error, from Matthew Leach. 9) at86rf230 can deadlock because it takes the same lock from it's ISR and it's hard_start_xmit method, without disabling interrupts in the latter. Fix from Alexander Aring. 10) The FEC driver's restart doesn't perform operations in the correct order, so promiscuous settings can get lost. Fix from Stefan Wahren. 11) Fix SKB leak in SCTP cookie handling, from Daniel Borkmann. 12) Reference count and memory leak fixes in TIPC from Ying Xue and Erik Hugne. 13) Forced eviction in inet_frag_evictor() must strictly make sure all frags are deleted, otherwise module unload (f.e. 6lowpan) can crash. Fix from Florian Westphal. 14) Remove assumptions in AF_UNIX's use of csum_partial() (which it uses as a hash function), which breaks on PowerPC. From Anton Blanchard. The main gist of the issue is that csum_partial() is defined only as a value that, once folded (f.e. via csum_fold()) produces a correct 16-bit checksum. It is legitimate, therefore, for csum_partial() to produce two different 32-bit values over the same data if their respective alignments are different. 15) Fix endiannes bug in MAC address handling of ibmveth driver, also from Anton Blanchard. 16) Error checks for ipv6 exthdrs offload registration are reversed, from Anton Nayshtut. 17) Externally triggered ipv6 addrconf routes should count against the garbage collection threshold. Fix from Sabrina Dubroca. 18) The PCI shutdown handler added to the bnx2 driver can wedge the chip if it was not brought up earlier already, which in particular causes the firmware to shut down the PHY. Fix from Michael Chan. 19) Adjust the sanity WARN_ON_ONCE() in qdisc_list_add() because as currently coded it can and does trigger in legitimate situations. From Eric Dumazet. 20) BNA driver fails to build on ARM because of a too large udelay() call, fix from Ben Hutchings. 21) Fair-Queue qdisc holds locks during GFP_KERNEL allocations, fix from Eric Dumazet. 22) The vlan passthrough ops added in the previous release causes a regression in source MAC address setting of outgoing headers in some circumstances. Fix from Peter Boström" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (70 commits) ipv6: Avoid unnecessary temporary addresses being generated eth: fec: Fix lost promiscuous mode after reconnecting cable bonding: set correct vlan id for alb xmit path at86rf230: fix lockdep splats net/mlx4_en: Deregister multicast vxlan steering rules when going down vmxnet3: fix building without CONFIG_PCI_MSI MAINTAINERS: add networking selftests to NETWORKING net: socket: error on a negative msg_namelen MAINTAINERS: Add tools/net to NETWORKING [GENERAL] packet: doc: Spelling s/than/that/ net/mlx4_core: Load the IB driver when the device supports IBoE net/mlx4_en: Handle vxlan steering rules for mac address changes net/mlx4_core: Fix wrong dump of the vxlan offloads device capability xen-netback: use skb_is_gso in xenvif_start_xmit r8169: fix the incorrect tx descriptor version tools/net/Makefile: Define PACKAGE to fix build problems x86: bpf_jit: support negative offsets bridge: multicast: enable snooping on general queries only bridge: multicast: add sanity check for general query destination tcp: tcp_release_cb() should release socket ownership ...
2014-03-13i2c: Remove usage of orphaned symbol OF_I2CRichard Weinberger
The symbol is an orphan, don't depend on it anymore. Signed-off-by: Richard Weinberger <richard@nod.at> [wsa: enhanced commit message] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Fixes: 687b81d083c0 (i2c: move OF helpers into the core) Cc: stable@kernel.org
2014-03-13Merge branches 'pnp', 'acpi-init', 'acpi-sleep' and 'pm-cpufreq'Rafael J. Wysocki
* pnp: PNP / ACPI: proper handling of ACPI IO/Memory resource parsing failures * acpi-init: ACPI / init: Invoke early ACPI initialization later * acpi-sleep: ACPI / sleep: Add extra checks for HW Reduced ACPI mode sleep states * pm-cpufreq: cpufreq: Skip current frequency initialization for ->setpolicy drivers
2014-03-13ACPI / sleep: Add extra checks for HW Reduced ACPI mode sleep statesRafael J. Wysocki
If the HW Reduced ACPI mode bit is set in the FADT, ACPICA uses the optional sleep control and sleep status registers for making the system enter sleep states (including S5), so it is not possible to use system sleep states or power it off using ACPI if the HW Reduced ACPI mode bit is set and those registers are not available. For this reason, add a new function, acpi_sleep_state_supported(), checking if the HW Reduced ACPI mode bit is set and whether or not system sleep states are usable in that case in addition to checking the return value of acpi_get_sleep_type_data() and make the ACPI sleep setup routines use that function to check the availability of system sleep states. Among other things, this prevents the kernel from attempting to use ACPI for powering off HW Reduced ACPI systems without the sleep control and sleep status registers, because ACPI power off doesn't have a chance to work on them. That allows alternative power off mechanisms that may actually work to be used on those systems. The affected machines include Dell Venue 8 Pro, Asus T100TA, Haswell Desktop SDP and Ivy Bridge EP Demo depot. References: https://bugzilla.kernel.org/show_bug.cgi?id=70931 Reported-by: Adam Williamson <awilliam@redhat.com> Tested-by: Aubrey Li <aubrey.li@linux.intel.com> Cc: 3.4+ <stable@vger.kernel.org> # 3.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-13ipv6: Avoid unnecessary temporary addresses being generatedHeiner Kallweit
tmp_prefered_lft is an offset to ifp->tstamp, not now. Therefore age needs to be added to the condition. Age calculation in ipv6_create_tempaddr is different from the one in addrconf_verify and doesn't consider ADDRCONF_TIMER_FUZZ_MINUS. This can cause age in ipv6_create_tempaddr to be less than the one in addrconf_verify and therefore unnecessary temporary address to be generated. Use age calculation as in addrconf_modify to avoid this. Signed-off-by: Heiner Kallweit <heiner.kallweit@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13eth: fec: Fix lost promiscuous mode after reconnecting cableStefan Wahren
If the Freescale fec is in promiscuous mode and network cable is reconnected then the promiscuous mode get lost. The problem is caused by a too soon call of set_multicast_list to re-enable promisc mode. The FEC_R_CNTRL register changes are overwritten by fec_restart. This patch fixes this by moving the call behind the init of FEC_R_CNTRL register in fec_restart. Successful tested on a i.MX28 board. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13bonding: set correct vlan id for alb xmit pathdingtianhong
The commit d3ab3ffd1d728d7ee77340e7e7e2c7cfe6a4013e (bonding: use rlb_client_info->vlan_id instead of ->tag) remove the rlb_client_info->tag, but occur some issues, The vlan_get_tag() will return 0 for success and -EINVAL for error, so the client_info->vlan_id always be set to 0 if the vlan_get_tag return 0 for success, so the client_info would never get a correct vlan id. We should only set the vlan id to 0 when the vlan_get_tag return error. Fixes: d3ab3ffd1d7 (bonding: use rlb_client_info->vlan_id instead of ->tag) CC: Ding Tianhong <dingtianhong@huawei.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13at86rf230: fix lockdep splatsAlexander Aring
This patch fix a lockdep in the at86rf230 driver, otherwise we get: [ 30.206517] ================================= [ 30.211078] [ INFO: inconsistent lock state ] [ 30.215647] 3.14.0-20140108-1-00994-g32e9426 #163 Not tainted [ 30.221660] --------------------------------- [ 30.226222] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 30.232514] systemd-udevd/157 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 30.238439] (&(&lp->lock)->rlock){?.+...}, at: [<c03600f8>] at86rf230_isr+0x18/0x44 [ 30.246621] {HARDIRQ-ON-W} state was registered at: [ 30.251728] [<c0061ce4>] __lock_acquire+0x7a4/0x18d8 [ 30.257135] [<c0063500>] lock_acquire+0x68/0x7c [ 30.262071] [<c0588820>] _raw_spin_lock+0x28/0x38 [ 30.267203] [<c0361240>] at86rf230_xmit+0x1c/0x144 [ 30.272412] [<c057ba6c>] mac802154_xmit_worker+0x88/0x148 [ 30.278271] [<c0047844>] process_one_work+0x274/0x404 [ 30.283761] [<c00484c0>] worker_thread+0x228/0x374 [ 30.288971] [<c004cfb8>] kthread+0xd0/0xe4 [ 30.293455] [<c000dac8>] ret_from_fork+0x14/0x2c [ 30.298493] irq event stamp: 8948 [ 30.301963] hardirqs last enabled at (8947): [<c00cb290>] __kmalloc+0xb4/0x110 [ 30.309636] hardirqs last disabled at (8948): [<c00115d4>] __irq_svc+0x34/0x5c [ 30.317215] softirqs last enabled at (8452): [<c0037324>] __do_softirq+0x1dc/0x264 [ 30.325243] softirqs last disabled at (8439): [<c0037638>] irq_exit+0x80/0xf4 We use the lp->lock inside the isr of at86rf230, that's why we need the irqsave spinlock calls. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13net/mlx4_en: Deregister multicast vxlan steering rules when going downOr Gerlitz
When mlx4_en_stop_port() is called, we need to deregister also the tunnel steering rules that relate to multicast. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13vmxnet3: fix building without CONFIG_PCI_MSIArnd Bergmann
Since commit d25f06ea466e "vmxnet3: fix netpoll race condition", the vmxnet3 driver fails to build when CONFIG_PCI_MSI is disabled, because it unconditionally references the vmxnet3_msix_rx() function. To fix this, use the same #ifdef in the caller that exists around the function definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: stable@vger.kernel.org Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13MAINTAINERS: add networking selftests to NETWORKINGDaniel Borkmann
Add it to NETWORKING [GENERAL] to make sure patches for selftests go to the netdev list as well. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13Merge tag 'ttm-fixes-3.14-2014-03-12' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-fixes Second pull request of 2014-03-12. The first one was requested to be canceled. Rob's fix for oops on invalidate_caches() and a fix for a performance regression. * tag 'ttm-fixes-3.14-2014-03-12' of git://people.freedesktop.org/~thomash/linux: drm/ttm: don't oops if no invalidate_caches() drm/ttm: Work around performance regression with VM_PFNMAP
2014-03-13Merge branch 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes A few more radeon fixes. * 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/cik: properly set compute ring status on disable drm/radeon/cik: stop the sdma engines in the enable() function drm/radeon/cik: properly set sdma ring status on disable drm/radeon: fix runpm disabling on non-PX harder
2014-03-13Merge tag 'vmwgfx-fixes-3.14-2014-03-13' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-fixes Pull request of 2014-03-13 one minor fix for new hw * tag 'vmwgfx-fixes-3.14-2014-03-13' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix a surface reference corner-case in legacy emulation mode
2014-03-13drm/vmwgfx: Fix a surface reference corner-case in legacy emulation modeThomas Hellstrom
If running on a gb-object capable device with a non-gb capable surface exporter (X server) and a gb capable surface referencing client (GL driver), the referencing client expects to find a shareable backing buffer attached to the surface at reference time. This may not be the case if the surface has not yet been validated. This would cause the surface reference IOCTL to return an error. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2014-03-12Merge tag 'pci-v3.14-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These are two important regression fixes for bugs we've introduced so far in v3.14. One of the resource allocation changes from the merge window is broken for 32-bit kernels where we don't use _CRS for PCI host bridges (mostly pre-2008 machines), so there's a fix for that. The INTx enable change we put in after the merge window turned out to break pciehp because we re-enable INTx on the hotplug bridge, which apparently breaks MSI for future hotplug events" * tag 'pci-v3.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Don't check resource_size() in pci_bus_alloc_resource() PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled
2014-03-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "The ARM patch fixes a build breakage with randconfig. The x86 one fixes Windows guests on AMD processors" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: fix cr8 intercept window ARM: KVM: fix non-VGIC compilation
2014-03-13ACPI / init: Invoke early ACPI initialization laterRafael J. Wysocki
Commit 73f7d1ca3263 (ACPI / init: Run acpi_early_init() before timekeeping_init()) optimistically moved the early ACPI initialization before timekeeping_init(), but that didn't work, because it broke fast TSC calibration for Julian Wollrath on Thinkpad x121e (and most likely for others too). The reason is that acpi_early_init() enables the SCI and that interferes with the fast TSC calibration mechanism. Thus follow the original idea to execute acpi_early_init() before efi_enter_virtual_mode() to help the EFI people for now and we can revisit the other problem that commit 73f7d1ca3263 attempted to address in the future (if really necessary). Fixes: 73f7d1ca3263 (ACPI / init: Run acpi_early_init() before timekeeping_init()) Reported-by: Julian Wollrath <jwollrath@web.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-13cpufreq: Skip current frequency initialization for ->setpolicy driversRafael J. Wysocki
After commit da60ce9f2fac (cpufreq: call cpufreq_driver->get() after calling ->init()) __cpufreq_add_dev() sometimes fails for CPUs handled by intel_pstate, because that driver may return 0 from its ->get() callback if it has not run long enough to collect enough samples on the given CPU. That didn't happen before commit da60ce9f2fac which added policy->cur initialization to __cpufreq_add_dev() to help reduce code duplication in other cpufreq drivers. However, the code added by commit da60ce9f2fac need not be executed for cpufreq drivers having the ->setpolicy callback defined, because the subsequent invocation of cpufreq_set_policy() will use that callback to initialize the policy anyway and it doesn't need policy->cur to be initialized upfront. The analogous code in cpufreq_update_policy() is also unnecessary for cpufreq drivers having ->setpolicy set and may be skipped for them as well. Since intel_pstate provides ->setpolicy, skipping the upfront policy->cur initialization for cpufreq drivers with that callback set will cover intel_pstate and the problem it's been having after commit da60ce9f2fac will be addressed. Fixes: da60ce9f2fac (cpufreq: call cpufreq_driver->get() after calling ->init()) References: https://bugzilla.kernel.org/show_bug.cgi?id=71931 Reported-and-tested-by: Patrik Lundquist <patrik.lundquist@gmail.com> Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Cc: 3.13+ <stable@vger.kernel.org> # 3.13+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-12Merge tag 'sound-3.14-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few fixes for ASoC (N810 DT init fix, DPCM error path fix and a couple of MFD init fixes), and a fix for a Lenovo laptop. All small and trivial fixes, suitable for rc7" * tag 'sound-3.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: 88pm860: Fix IO setup ASoC: si476x: Fix IO setup ALSA: hda - Fix loud click noise with IdeaPad 410Y ASoC: pcm: free path list before exiting from error conditions ASoC: n810: fix init with DT boot
2014-03-12net: socket: error on a negative msg_namelenMatthew Leach
When copying in a struct msghdr from the user, if the user has set the msg_namelen parameter to a negative value it gets clamped to a valid size due to a comparison between signed and unsigned values. Ensure the syscall errors when the user passes in a negative value. Signed-off-by: Matthew Leach <matthew.leach@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12drm/radeon/cik: properly set compute ring status on disableAlex Deucher
When we disable the rings, set the status properly. If not other code pathes may try and use the rings which are not functional at this point. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-03-12MAINTAINERS: Add tools/net to NETWORKING [GENERAL]Tobias Klauser
Make sure patches for these tools go to the netdev list as well. References: https://marc.info/?l=linux-kernel&m=139450284501328&w=2 Cc: David S. Miller <davem@davemloft.net> Cc: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12packet: doc: Spelling s/than/that/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12Merge branch 'mlx4'David S. Miller
Or Gerlitz says: ==================== mlx4 fixes These short series fixes two bugs related to the vxlan support and a missing req module call for the IB driver which is needed to support IB/RDMA over Ethernet. Pathes done over the net tree, commit dd38743 "vlan: Set correct source MAC address with TX VLAN offload enabled" ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12net/mlx4_core: Load the IB driver when the device supports IBoEOr Gerlitz
When checking what protocol drivers to load, the IB driver should be requested also over Ethernet ports, if the device supports IBoE (RoCE). Fixes: b046ffe 'net/mlx4_core: Load higher level modules according to ports type' Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12net/mlx4_en: Handle vxlan steering rules for mac address changesOr Gerlitz
When the device mac address is changed, we must deregister the vxlan steering rule associated with the previous mac, and register a new steering rule using the new mac. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12net/mlx4_core: Fix wrong dump of the vxlan offloads device capabilityOr Gerlitz
Fix the value used to dump the vxlan offloads device capability to align with the MLX4_DEV_CAP_FLAG2_yyy definition. While on that, add dump to the IPoIB flow-steering device capability and fix small typo. The vxlan cap value wasn't fully handled when a conflict was resolved between MLX4_DEV_CAP_FLAG2_DMFS_IPOIB coming from the IB tree to MLX4_DEV_CAP_FLAG2_VXLAN_OFFLOADS coming from net-next. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12drm/radeon/cik: stop the sdma engines in the enable() functionAlex Deucher
We always stop the rings when disabling the engines so just call the stop functions directly from the sdma enable function. This way the rings' status is set correctly on suspend so there are no problems on resume. Fixes resume failures that result in acceleration getting disabled. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-03-12drm/radeon/cik: properly set sdma ring status on disableAlex Deucher
When we disable the rings, set the status properly. If not other code pathes may try and use the rings which are not functional at this point. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-03-12drm/radeon: fix runpm disabling on non-PX harderAlex Deucher
Make sure runtime pm is disabled on non-PX hardware. Should fix powerdown problems without displays attached. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-03-12xen-netback: use skb_is_gso in xenvif_start_xmitWei Liu
In 5bd076708 ("Xen-netback: Fix issue caused by using gso_type wrongly") we use skb_is_gso to determine if we need an extra slot to accommodate the SKB. There's similar error in interface.c. Change that to use skb_is_gso as well. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Cc: Annie Li <annie.li@oracle.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Paul Durrant <paul.durrant@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12drm/ttm: don't oops if no invalidate_caches()Rob Clark
A few of the simpler TTM drivers (cirrus, ast, mgag200) do not implement this function. Yet can end up somehow with an evicted bo: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) PGD 16e761067 PUD 16e6cf067 PMD 0 Oops: 0010 [#1] SMP Modules linked in: bnep bluetooth rfkill fuse ip6t_rpfilter ip6t_REJECT ipt_REJECT xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter ip_tables sg btrfs zlib_deflate raid6_pq xor dm_queue_length iTCO_wdt iTCO_vendor_support coretemp kvm dcdbas dm_service_time microcode serio_raw pcspkr lpc_ich mfd_core i7core_edac edac_core ses enclosure ipmi_si ipmi_msghandler shpchp acpi_power_meter mperf nfsd auth_rpcgss nfs_acl lockd uinput sunrpc dm_multipath xfs libcrc32c ata_generic pata_acpi sr_mod cdrom sd_mod usb_storage mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit lpfc drm_kms_helper ttm crc32c_intel ata_piix bfa drm ixgbe libata i2c_core mdio crc_t10dif ptp crct10dif_common pps_core scsi_transport_fc dca scsi_tgt megaraid_sas bnx2 dm_mirror dm_region_hash dm_log dm_mod CPU: 16 PID: 2572 Comm: X Not tainted 3.10.0-86.el7.x86_64 #1 Hardware name: Dell Inc. PowerEdge R810/0H235N, BIOS 0.3.0 11/14/2009 task: ffff8801799dabc0 ti: ffff88016c884000 task.ti: ffff88016c884000 RIP: 0010:[<0000000000000000>] [< (null)>] (null) RSP: 0018:ffff88016c885ad8 EFLAGS: 00010202 RAX: ffffffffa04e94c0 RBX: ffff880178937a20 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000240004 RDI: ffff880178937a00 RBP: ffff88016c885b60 R08: 00000000000171a0 R09: ffff88007cf171a0 R10: ffffea0005842540 R11: ffffffff810487b9 R12: ffff880178937b30 R13: ffff880178937a00 R14: ffff88016c885b78 R15: ffff880179929400 FS: 00007f81ba2ef980(0000) GS:ffff88007cf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000016e763000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffffa0306fae ffff8801799295c0 0000000000260004 0000000000000001 ffff88016c885b60 ffffffffa0307669 00ff88007cf17738 ffff88017cf17700 ffff880178937a00 ffff880100000000 ffff880100000000 0000000079929400 Call Trace: [<ffffffffa0306fae>] ? ttm_bo_handle_move_mem+0x54e/0x5b0 [ttm] [<ffffffffa0307669>] ? ttm_bo_mem_space+0x169/0x340 [ttm] [<ffffffffa0307bd7>] ttm_bo_move_buffer+0x117/0x130 [ttm] [<ffffffff81130001>] ? perf_event_init_context+0x141/0x220 [<ffffffffa0307cb1>] ttm_bo_validate+0xc1/0x130 [ttm] [<ffffffffa04e7377>] mgag200_bo_pin+0x87/0xc0 [mgag200] [<ffffffffa04e56c4>] mga_crtc_cursor_set+0x474/0xbb0 [mgag200] [<ffffffff811971d2>] ? __mem_cgroup_commit_charge+0x152/0x3b0 [<ffffffff815c4182>] ? mutex_lock+0x12/0x2f [<ffffffffa0201433>] drm_mode_cursor_common+0x123/0x170 [drm] [<ffffffffa0205231>] drm_mode_cursor_ioctl+0x41/0x50 [drm] [<ffffffffa01f5ca2>] drm_ioctl+0x502/0x630 [drm] [<ffffffff815cbab4>] ? __do_page_fault+0x1f4/0x510 [<ffffffff8101cb68>] ? __restore_xstate_sig+0x218/0x4f0 [<ffffffff811b4445>] do_vfs_ioctl+0x2e5/0x4d0 [<ffffffff8124488e>] ? file_has_perm+0x8e/0xa0 [<ffffffff811b46b1>] SyS_ioctl+0x81/0xa0 [<ffffffff815d05d9>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [< (null)>] (null) RSP <ffff88016c885ad8> CR2: 0000000000000000 Signed-off-by: Rob Clark <rclark@redhat.com> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: stable@vger.kernel.org
2014-03-12dm cache: fix access beyond end of origin deviceHeinz Mauelshagen
In order to avoid wasting cache space a partial block at the end of the origin device is not cached. Unfortunately, the check for such a partial block at the end of the origin device was flawed. Fix accesses beyond the end of the origin device that occured due to attempted promotion of an undetected partial block by: - initializing the per bio data struct to allow cache_end_io to work properly - recognizing access to the partial block at the end of the origin device - avoiding out of bounds access to the discard bitset Otherwise, users can experience errors like the following: attempt to access beyond end of device dm-5: rw=0, want=20971520, limit=20971456 ... device-mapper: cache: promotion failed; couldn't copy block Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2014-03-12dm cache: fix truncation bug when copying a block to/from >2TB fast deviceHeinz Mauelshagen
During demotion or promotion to a cache's >2TB fast device we must not truncate the cache block's associated sector to 32bits. The 32bit temporary result of from_cblock() caused a 32bit multiplication when calculating the sector of the fast device in issue_copy_real(). Use an intermediate 64bit type to store the 32bit from_cblock() to allow for proper 64bit multiplication. Here is an example of how this bug manifests on an ext4 filesystem: EXT4-fs error (device dm-0): ext4_mb_generate_buddy:756: group 17136, 32768 clusters in bitmap, 30688 in gd; block bitmap corrupt. JBD2: Spotted dirty metadata buffer (dev = dm-0, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2014-03-12KVM: SVM: fix cr8 intercept windowRadim Krčmář
We always disable cr8 intercept in its handler, but only re-enable it if handling KVM_REQ_EVENT, so there can be a window where we do not intercept cr8 writes, which allows an interrupt to disrupt a higher priority task. Fix this by disabling intercepts in the same function that re-enables them when needed. This fixes BSOD in Windows 2008. Cc: <stable@vger.kernel.org> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-12PCI: Don't check resource_size() in pci_bus_alloc_resource()Bjorn Helgaas
Paul reported that after f75b99d5a77d ("PCI: Enforce bus address limits in resource allocation") on a 32-bit kernel (CONFIG_PHYS_ADDR_T_64BIT not set), intel-gtt complained "can't ioremap flush page - no chipset flushing". In addition, other PCI resource allocations, e.g., for bridge windows, failed. This happens because we incorrectly skip bus resources of [mem 0x00000000-0xffffffff] because we think they are of size zero. When resource_size_t is 32 bits wide, resource_size() on [mem 0x00000000-0xffffffff] returns 0 because (r->end - r->start + 1) overflows. Therefore, we can't use "resource_size() == 0" to decide that allocation from this resource will fail. allocate_resource() should fail anyway if it can't satisfy the address constraints, so we should just depend on that. A [mem 0x00000000-0xffffffff] bus resource is obviously not really valid, but we do fall back to it as a default when we don't have information about host bridge apertures. Link: https://bugzilla.kernel.org/show_bug.cgi?id=71611 Fixes: f75b99d5a77d PCI: Enforce bus address limits in resource allocation Reported-and-tested-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-03-12PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabledBjorn Helgaas
Andreas reported that after 1f42db786b14 ("PCI: Enable INTx if BIOS left them disabled"), pciehp surprise removal stopped working. This happens because pci_reenable_device() on the hotplug bridge (used in the pciehp_configure_device() path) clears the Interrupt Disable bit, which apparently breaks the bridge's MSI hotplug event reporting. Previously we cleared the Interrupt Disable bit in do_pci_enable_device(), which is used by both pci_enable_device() and pci_reenable_device(). But we use pci_reenable_device() after the driver may have enabled MSI or MSI-X, and we *set* Interrupt Disable as part of enabling MSI/MSI-X. This patch clears Interrupt Disable only when MSI/MSI-X has not been enabled. Fixes: 1f42db786b14 PCI: Enable INTx if BIOS left them disabled Link: https://bugzilla.kernel.org/show_bug.cgi?id=71691 Reported-and-tested-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-12drm/ttm: Work around performance regression with VM_PFNMAPThomas Hellstrom
A performance regression was introduced in TTM in linux 3.13 when we started using VM_PFNMAP for shared mappings. In theory this should've been faster due to less page book-keeping but it appears like VM_PFNMAP + x86 PAT + write-combine is a particularly cpu-hungry combination, as seen by largely increased cpu-usage on r200 GL video playback. Until we've sorted out why, revert to always use VM_MIXEDMAP. Reference: freedesktop.org bugzilla bug #75719 Reported-and-tested-by: <smoki00790@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: stable@vger.kernel.org