summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-10-20vmscan: free swap space on swap-in/activationRik van Riel
If vm_swap_full() (swap space more than 50% full), the system will free swap space at swapin time. With this patch, the system will also free the swap space in the pageout code, when we decide that the page is not a candidate for swapout (and just wasting swap space). Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: MinChan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20swap: use an array for the LRU pagevecsKOSAKI Motohiro
Turn the pagevecs into an array just like the LRUs. This significantly cleans up the source code and reduces the size of the kernel by about 13kB after all the LRU lists have been created further down in the split VM patch series. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20vmscan: Use an indexed array for LRU variablesChristoph Lameter
Currently we are defining explicit variables for the inactive and active list. An indexed array can be more generic and avoid repeating similar code in several places in the reclaim code. We are saving a few bytes in terms of code size: Before: text data bss dec hex filename 4097753 573120 4092484 8763357 85b7dd vmlinux After: text data bss dec hex filename 4097729 573120 4092484 8763333 85b7c5 vmlinux Having an easy way to add new lru lists may ease future work on the reclaim code. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20vmscan: move isolate_lru_page() to vmscan.cNick Piggin
On large memory systems, the VM can spend way too much time scanning through pages that it cannot (or should not) evict from memory. Not only does it use up CPU time, but it also provokes lock contention and can leave large systems under memory presure in a catatonic state. This patch series improves VM scalability by: 1) putting filesystem backed, swap backed and unevictable pages onto their own LRUs, so the system only scans the pages that it can/should evict from memory 2) switching to two handed clock replacement for the anonymous LRUs, so the number of pages that need to be scanned when the system starts swapping is bound to a reasonable number 3) keeping unevictable pages off the LRU completely, so the VM does not waste CPU time scanning them. ramfs, ramdisk, SHM_LOCKED shared memory segments and mlock()ed VMA pages are keept on the unevictable list. This patch: isolate_lru_page logically belongs to be in vmscan.c than migrate.c. It is tough, because we don't need that function without memory migration so there is a valid argument to have it in migrate.c. However a subsequent patch needs to make use of it in the core mm, so we can happily move it to vmscan.c. Also, make the function a little more generic by not requiring that it adds an isolated page to a given list. Callers can do that. Note that we now have '__isolate_lru_page()', that does something quite different, visible outside of vmscan.c for use with memory controller. Methinks we need to rationalize these names/purposes. --lts [akpm@linux-foundation.org: fix mm/memory_hotplug.c build] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20mm: cleanup to make remove_memory() arch-neutralBadari Pulavarty
There is nothing architecture specific about remove_memory(). remove_memory() function is common for all architectures which support hotplug memory remove. Instead of duplicating it in every architecture, collapse them into arch neutral function. [akpm@linux-foundation.org: fix the export] Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Gary Hade <garyhade@us.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20serial_txx9: use %lx for iobaseAtsushi Nemoto
Fix a warning caused by commit 0c8946d97ae7d2d6691f8290a10faa63453b63f8 (serial: Make uart_port's ioport "unsigned long".) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Josip Rodin <joy@entuzijast.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20tpm: don't export static functionsStephen Rothwell
Today's linux-next build (powerpc_allyesconfig) failed like this: drivers/char/tpm/tpm.c:1162: error: __ksymtab_tpm_dev_release causes a section type conflict Caused by commit 253115b71fa06330bd58afbe01ccaf763a8a0cf1 ("The tpm_dev_release function is only called for platform devices, not pnp") which exported a static function. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20mailmap: add Mark BrownMark Brown
A couple of commits have a broken real name - fix them up. Signed-off-by: Mark Brown <broonie@sirena.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19anon_vma_prepare: properly lock even newly allocated entriesLinus Torvalds
The anon_vma code is very subtle, and we end up doing optimistic lookups of anon_vmas under RCU in page_lock_anon_vma() with no locking. Other CPU's can also see the newly allocated entry immediately after we've exposed it by setting "vma->anon_vma" to the new value. We protect against the anon_vma being destroyed by having the SLAB marked as SLAB_DESTROY_BY_RCU, so the RCU lookup can depend on the allocation not being destroyed - but it might still be free'd and re-allocated here to a new vma. As a result, we should not do the anon_vma list ops on a newly allocated vma without proper locking. Acked-by: Nick Piggin <npiggin@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (94 commits) USB: remove err() macro from more usb drivers USB: remove err() macro from usb misc drivers USB: remove err() macro from usb core code USB: remove err() macro from usb class drivers USB: remove use of err() in drivers/usb/serial USB: remove info() macro from usb mtd drivers USB: remove info() macro from usb input drivers USB: remove info() macro from usb network drivers USB: remove info() macro from remaining usb drivers USB: remove info() macro from usb/misc drivers USB: remove info() macro from usb/serial drivers USB: remove warn macro from HID core USB: remove warn() macro from usb drivers USB: remove warn() macro from usb net drivers USB: remove warn() macro from usb media drivers USB: remove warn() macro from usb input drivers usb/fsl_qe_udc: clear data toggle on clear halt request usb/fsl_qe_udc: fix response to get status request fsl_usb2_udc: Fix oops on probe failure. fsl_usb2_udc: Add a wmb before priming endpoint. ...
2008-10-17Merge branch 'drm-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (44 commits) drm/i915: fix ioremap of a user address for non-root (CVE-2008-3831) drm: make CONFIG_DRM depend on CONFIG_SHMEM. radeon: fix PCI bus mastering support enables. radeon: add RS400 family support. drm/radeon: add support for RS740 IGP chipsets. i915: GM45 has GM965-style MCH setup. i915: Don't run retire work handler while suspended i915: Map status page cached for chips with GTT-based HWS location. i915: Fix up ring initialization to cover G45 oddities i915: Use non-reserved status page index for breadcrumb drm: Increment dev_priv->irq_received so i915_gem_interrupts count works. drm: kill drm_device->irq drm: wbinvd is cache coherent. i915: add missing return in error path. i915: fixup permissions on gem ioctls. drm: Clean up many sparse warnings in i915. drm: Use ioremap_wc in i915_driver instead of ioremap, since we always want WC. drm: G33-class hardware has a newer 965-style MCH (no DCC register). drm: Avoid oops in GEM execbuffers with bad arguments. DRM: Return -EBADF on bad object in flink, and return curent name if it exists. ...
2008-10-17Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (95 commits) V4L/DVB (9296): Patch to remove warning message during cx88-dvb compilation V4L/DVB (9294): gspca: Add a stop sequence in t613. V4L/DVB (9293): gspca: Separate and fix the sensor dependant sequences in t613. V4L/DVB (9292): gspca: Call the control setting functions at init time in t613. V4L/DVB (9291): gspca: Do not set the white balance temperature by default in t613. V4L/DVB (9290): gspca: Adjust the sensor init sequences in t613. V4L/DVB (9289): gspca: Other sensor identified as om6802 in t613. V4L/DVB (9288): gspca: Write to the USB device and not USB interface in t613. V4L/DVB (9287): gspca: Change the name of the multi bytes write function in t613. V4L/DVB (9286): gspca: Compilation problem of gspca.c and the kernel version. V4L/DVB (9283): Correct typo and enable setting the gain on the mt9m111 sensor V4L/DVB (9282): Properly iterate the urbs when destroying them. V4L/DVB (9281): gspca: Add hflip and vflip to the po1030 sensor V4L/DVB (9280): gspca: Use the gspca debug macros V4L/DVB (9279): gspca: Correct some copyright headers V4L/DVB (9278): gspca: Remove the m5602_debug variable V4L/DVB (9277): gspca: propagate an error in m5602_start_transfer() V4L/DVB (9276): videobuf-dvb: two functions are now static V4L/DVB (9275): dvb: input data pointer of cx24116_writeregN() should be const V4L/DVB (9274): Remove spurious messages and turn into debug. ...
2008-10-17Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Remove automatic enabling of the HUGE_FILE feature flag ext4: Replace hackish ext4_mb_poll_new_transaction with commit callback ext4: Update Documentation/filesystems/ext4.txt ext4: Remove unused mount options: nomballoc, mballoc, nocheck ext4: Remove compile warnings when building w/o CONFIG_PROC_FS ext4: Add missing newlines to printk messages ext4: Fix file fragmentation during large file write. vfs: Add no_nrwrite_index_update writeback control flag vfs: Remove the range_cont writeback mode. ext4: Use tag dirty lookup during mpage_da_submit_io ext4: let the block device know when unused blocks can be discarded ext4: Don't reuse released data blocks until transaction commits ext4: Use an rbtree for tracking blocks freed during transaction. ext4: Do mballoc init before doing filesystem recovery ext4: Free ext4_prealloc_space using kmem_cache_free ext4: Fix Kconfig typo for ext4dev ext4: Remove an old reference to ext4dev in Makefile comment
2008-10-17USB: remove err() macro from more usb driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove err() and use the system-wide standard of dev_err() wherever possible. In the few places that will not work out, use a basic printk(). Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove err() macro from usb misc driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove err() and use the system-wide standard of dev_err() wherever possible. In the few places that will not work out, use a basic printk(). Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove err() macro from usb core codeGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove err() and use the system-wide standard of dev_err() wherever possible. In the few places that will not work out, use a basic printk(). Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove err() macro from usb class driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove err() and use the system-wide standard of dev_err() wherever possible. In the few places that will not work out, use a basic printk(). Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove use of err() in drivers/usb/serialGreg Kroah-Hartman
err() is going away, so switch to dev_err() or printk() if it's really needed. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove info() macro from usb mtd driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove info() macro from usb input driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove info() macro from usb network driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove info() macro from remaining usb driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. In the few places that will not work out, use a basic printk(). Clean up the remaining usages of this in the drivers/usb/ directory. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove info() macro from usb/misc driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove info() macro from usb/serial driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove warn macro from HID coreGreg Kroah-Hartman
There were two stragglers that got missed in the last merge of the HID tree that forgot to change the warn() calls to dev_warn(). This patch fixes them up. Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove warn() macro from usb driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove warn() and use the system-wide standard of dev_warn() wherever possible. In the few places that will not work out, use a basic printk(). Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove warn() macro from usb net driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove warn() and use the system-wide standard of dev_warn() wherever possible. In the few places that will not work out, use a basic printk(). Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove warn() macro from usb media driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove warn() and use the system-wide standard of dev_warn() wherever possible. In the few places that will not work out, use a basic printk(). Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove warn() macro from usb input driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove warn() and use the system-wide standard of dev_warn() wherever possible. In the few places that will not work out, use a basic printk(). Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17usb/fsl_qe_udc: clear data toggle on clear halt requestLi Yang
Fix to comply with USB spec. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17usb/fsl_qe_udc: fix response to get status requestLi Yang
The original code didn't respond correctly to get status request on device and endpoint. Although normal operations can work without the fix. It is not compliant with USB spec chapter9 and fails USBCV ch9 tests. The patch fix this and a few style/typo problems. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17fsl_usb2_udc: Fix oops on probe failure.Will Newton
In some circumstances when fsl_udc_probe fails udc_controller is freed but the pointer remains non-NULL. fsl_udc_remove will then try and teardown the partly initialized and freed controller structure resulting in an oops. This patch ensures udc_controller is either NULL or fully initialized after fsl_udc_probe. Signed-off-by: Will Newton <will.newton@gmail.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17fsl_usb2_udc: Add a wmb before priming endpoint.Will Newton
Add a wmb to fsl_queue_td before priming the endpoint. This ensures that the modifications to the QH are seen by the hardware. Added comment as suggested by Felipe Balbi. Signed-off-by: Will Newton <will.newton@gmail.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17fsl_usb2_udc: Make fsl_queue_td return type void.Will Newton
fsl_queue_td always returns 0. Make it void and remove checks for non-zero return in callers. Signed-off-by: Will Newton <will.newton@gmail.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17fsl_usb2_udc: Uninline udc_reset_ep_queue.Will Newton
Uninline udc_reset_ep_queue and remove it's unused return value. Signed-off-by: Will Newton <will.newton@gmail.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17fsl_usb2_udc: Rename the arguments of the fsl_writel macro.Will Newton
Rename the arguments of the fsl_writel macro to match their use. Remove a couple of unnecessary prototypes. Signed-off-by: Will Newton <will.newton@gmail.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17fsl_usb2_udc: Initialize spinlock earlier.Will Newton
Move spinlock initialization earlier so we can turn shared irq handler debugging on safely. Signed-off-by: Will Newton <will.newton@gmail.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17fsl_usb2_udc: Clean up whitespace in /proc debugging output.Will Newton
Missing spaces were causing the /proc debugging output to be rather unreadable. Signed-off-by: Will Newton <will.newton@gmail.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17fsl_usb2_udc: Clean up whitespace in errors and warnings.Will Newton
VDBG always outputs a trailing \n. Signed-off-by: Will Newton <will.newton@gmail.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17fsl_usb2_udc: Fix some sparse warnings and remove redundant code.Will Newton
Fix some sparse "integer used as NULL pointer" warnings. Remove some unnecessary volatiles and static initialization. Remove some unused struct members and reorder to improve packing. Remove a few unneeded includes. Signed-off-by: Will Newton <will.newton@gmail.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17fsl_usb2_udc: Remove check for udc == NULL in dr_controller_setup.Will Newton
Remove check for udc == NULL in dr_controller_setup. All callers of this function have already dereferenced udc at some point. Signed-off-by: Will Newton <will.newton@gmail.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17fsl_usb2_udc: Make dr_ep_setup function static.Will Newton
Make dr_ep_setup function static as it's never used outside this file. Signed-off-by: Will Newton <will.newton@gmail.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: fix up problems in the vtusb driverStephen Ware
Add range check on buffer sizes passed in from user space (max is 8*PAGE_SIZE) which will work for the most common spectrometers even at pages as small as 1K. Add kref to vst device structure to preserve reference to the usb object until we truly are done with it. From: Stephen Ware <stephen.ware@eqware.net> From: Dennis O'Brien <dennis.obrien@eqware.net> Signed-off-by: Dennis O'Brien <dennis.obrien@eqware.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: OHCI: fix endless polling behaviorAlan Stern
This patch (as1149) fixes an obscure problem in OHCI polling. In the current code, if the RHSC interrupt status flag turns on at a time when RHSC interrupts are disabled, it will remain on forever: The interrupt handler is the only place where RHSC status gets turned back off; The interrupt handler won't turn RHSC status off because it doesn't turn off status flags if the corresponding interrupt isn't enabled; RHSC interrupts will never get enabled because ohci_root_hub_state_changes() doesn't reenable RHSC if RHSC status is on! As a result we will continue polling indefinitely instead of reverting to interrupt-driven operation, and the root hub will not autosuspend. This particular sequence of events is not at all unusual; in fact plugging a USB device into an OHCI controller will usually cause it to occur. Of course, this is a bug. The proper thing to do is to turn off RHSC status just before reading the actual port status values. That way either a port status change will be detected (if it occurs before the status read) or it will turn RHSC back on. Possibly both, but that won't hurt anything. We can still check for systems in which RHSC is totally broken, by re-reading RHSC after clearing it and before reading the port statuses. (This re-read has to be done anyway, to post the earlier write.) If RHSC is on but no port-change statuses are set, then we know that RHSC is broken and we can avoid re-enabling it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: option: add Pantech cardsDan Williams
Add some Pantech mobile broadband IDs. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: hub.c: Add initial_descriptor_timeout module parameter for usbcoreJaroslav Kysela
This patch adds initial_descriptor_timeout module parameter for usbcore.ko to allow modify initial 64-byte USB_REQ_GET_DESCRIPTOR timeout for non-standard devices. For example, the SATA8000 device from DATAST0R Technology Corp requires about 10 seconds to send reply (probably it waits until inserted disk is ready for operation). Also, this patch adds missing usbcore parameters to Documentation/kernel-parameters.txt. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: Export if an interface driver supports autosuspend.Sarah Sharp
Create a new sysfs file per interface named supports_autosuspend. This file returns true if an interface driver's .supports_autosuspend flag is set. It also returns true if the interface is unclaimed (since the USB core will autosuspend a device if an interface is not claimed). This new sysfs file will be useful for user space scripts to test whether a USB device correctly auto-suspends. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: EHCI: fix remote-wakeup support for ARC/TDI coreAlan Stern
This patch (as1147) fixes the remote-wakeup support for EHCI controllers using the ARC/TDI "embedded-TT" core. These controllers turn off the RESUME bit by themselves when a port resume is complete; hence we need to keep separate track of which ports are suspended or in the process of resuming. The patch also makes a couple of small improvements in ehci_irq(), replacing reads of the command register with the value already stored in a local variable. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Thomas Reitmayr <treitmayr@devbase.at> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: snoop processes opening usbfs device filesAlan Stern
This patch (as1148) adds a new "snoop" message to usbfs when a device file is opened, identifying the process responsible. This comes in extremely handy when trying to determine which program is doing some unwanted USB access. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: Option / AnyData new modem, same IDJon K Hellan
The AnyData ADU-310 series of wireless modems uses the same product ID as the ADU-E100 series. Signed-off-by: Jon K Hellan <hellan@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>