summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-01-25ALSA: virtuoso: Xonar DS: fix polarity of front outputClemens Ladisch
commit f0e48b6bd4e407459715240cd241ddb6b89bdf81 upstream. The two DACs for the front output and the surround/center/LFE/back outputs are wired up out of phase, so when channels are duplicated, their sound can cancel out each other and result in a weaker bass response. To fix this, reverse the polarity of the neutron flow to the front output. Reported-any-tested-by: Daniel Hill <daniel@enemyplanet.geek.nz> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25ALSA: HDA: Use LPIB position fix for Macbook Pro 7,1David Henningsson
commit b01de4fb40137fbda7530550ff0cd37171dafb0c upstream. Several users have reported "choppy" audio under the 3.2 kernel, and that changing position_fix to 1 has resolved their problem. The chip is an nVidia Corporation MCP89 High Definition Audio, [10de:0d94] (rev a2). BugLink: https://bugs.launchpad.net/bugs/909419 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25proc: clean up and fix /proc/<pid>/mem handlingLinus Torvalds
commit e268337dfe26dfc7efd422a804dbb27977a3cccc upstream. Jüri Aedla reported that the /proc/<pid>/mem handling really isn't very robust, and it also doesn't match the permission checking of any of the other related files. This changes it to do the permission checks at open time, and instead of tracking the process, it tracks the VM at the time of the open. That simplifies the code a lot, but does mean that if you hold the file descriptor open over an execve(), you'll continue to read from the _old_ VM. That is different from our previous behavior, but much simpler. If somebody actually finds a load where this matters, we'll need to revert this commit. I suspect that nobody will ever notice - because the process mapping addresses will also have changed as part of the execve. So you cannot actually usefully access the fd across a VM change simply because all the offsets for IO would have changed too. Reported-by: Jüri Aedla <asd@ut.ee> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25dm: do not forward ioctls from logical volumes to the underlying devicePaolo Bonzini
commit ec8013beddd717d1740cfefb1a9b900deef85462 upstream. A logical volume can map to just part of underlying physical volume. In this case, it must be treated like a partition. Based on a patch from Alasdair G Kergon. Cc: Alasdair G Kergon <agk@redhat.com> Cc: dm-devel@redhat.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25block: fail SCSI passthrough ioctls on partition devicesPaolo Bonzini
commit 0bfc96cb77224736dfa35c3c555d37b3646ef35e upstream. [ Changes with respect to 3.3: return -ENOTTY from scsi_verify_blk_ioctl and -ENOIOCTLCMD from sd_compat_ioctl. ] Linux allows executing the SG_IO ioctl on a partition or LVM volume, and will pass the command to the underlying block device. This is well-known, but it is also a large security problem when (via Unix permissions, ACLs, SELinux or a combination thereof) a program or user needs to be granted access only to part of the disk. This patch lets partitions forward a small set of harmless ioctls; others are logged with printk so that we can see which ioctls are actually sent. In my tests only CDROM_GET_CAPABILITY actually occurred. Of course it was being sent to a (partition on a) hard disk, so it would have failed with ENOTTY and the patch isn't changing anything in practice. Still, I'm treating it specially to avoid spamming the logs. In principle, this restriction should include programs running with CAP_SYS_RAWIO. If for example I let a program access /dev/sda2 and /dev/sdb, it still should not be able to read/write outside the boundaries of /dev/sda2 independent of the capabilities. However, for now programs with CAP_SYS_RAWIO will still be allowed to send the ioctls. Their actions will still be logged. This patch does not affect the non-libata IDE driver. That driver however already tests for bd != bd->bd_contains before issuing some ioctl; it could be restricted further to forbid these ioctls even for programs running with CAP_SYS_ADMIN/CAP_SYS_RAWIO. Cc: linux-scsi@vger.kernel.org Cc: Jens Axboe <axboe@kernel.dk> Cc: James Bottomley <JBottomley@parallels.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [ Make it also print the command name when warning - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25block: add and use scsi_blk_cmd_ioctlPaolo Bonzini
commit 577ebb374c78314ac4617242f509e2f5e7156649 upstream. Introduce a wrapper around scsi_cmd_ioctl that takes a block device. The function will then be enhanced to detect partition block devices and, in that case, subject the ioctls to whitelisting. Cc: linux-scsi@vger.kernel.org Cc: Jens Axboe <axboe@kernel.dk> Cc: James Bottomley <JBottomley@parallels.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25fix cputime overflow in uptime_proc_showMartin Schwidefsky
commit c3e0ef9a298e028a82ada28101ccd5cf64d209ee upstream. For 32-bit architectures using standard jiffies the idletime calculation in uptime_proc_show will quickly overflow. It takes (2^32 / HZ) seconds of idle-time, or e.g. 12.45 days with no load on a quad-core with HZ=1000. Switch to 64-bit calculations. Cc: Michael Abbott <michael.abbott@diamond.ac.uk> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25HID: hid-multitouch: add support 9 new Xiroku devicesMasatoshi Hoshikawa
commit 11576c6114c3b6505aea2e0c988bedb856a0e20c upstream. This patch adds support for the Xiroku Inc. panels (SPX/MPX/CSR/etc.). Signed-off-by: Masatoshi Hoshikawa <hoshikawa@xiroku.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25HID: multitouch: add support for 3M 32"Benjamin Tissoires
commit c4fad877cd0efb51d8180ae2eaa791c99c92051c upstream. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25HID: multitouch: add support of Atmel multitouch panelsBenjamin Tissoires
commit b105712469d957cf1ab223c1ea72b7ba88edb926 upstream. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25HID: hid-multitouch: add support for new Hanvon panelsBenjamin Tissoires
commit 545803651da8dde248eeb8ce3ed1e547e9e4ac0a upstream. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25HID: multitouch: add support for the MSI Windpad 110WBenjamin Tissoires
commit 66f06127f34ad6e8a1b24a2c03144b694d19f99f upstream. Just another eGalax device. Please note that adding this device to have_special_driver in hid-core.c is not required anymore. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25HID: multitouch: Add egalax ID for Acer Iconia W500Marek Vasut
commit bb9ff21072043634f147c05ac65dbf8185d4af6d upstream. This patch adds USB ID for the touchpanel in Acer Iconia W500. The panel supports up to five fingers, therefore the need for a new addition of panel types. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25HID: multitouch: cleanup with eGalax PID definitionsBenjamin Tissoires
commit e36f690b37945e0a9bb1554e1546eeec93f7d1f6 upstream. This is just a renaming of USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH{N} to USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_{PID} to handle more eGalax devices. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25HID: hid-multitouch - add another eGalax idChris Bagwell
commit 1fd8f047490dd0ec4e4db710fcbc1bd4798d944c upstream. This allows ASUS Eee Slate touchscreens to work. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25mac80211: revert on-channel work optimisationsJohannes Berg
commit e76aadc572288a158ae18ae1c10fe395c7bca066 upstream. Backport note: This patch it's a full revert of commit b23b025f "mac80211: Optimize scans on current operating channel.". On upstrem revert e76aadc5 we keep some bits from that commit, which are needed for upstream version of mac80211. The on-channel work optimisations have caused a number of issues, and the code is unfortunately very complex and almost impossible to follow. Instead of attempting to put in more workarounds let's just remove those optimisations, we can work on them again later, after we change the whole auth/assoc design. This should fix rate_control_send_low() warnings, see RH bug 731365. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25pnfsblock: limit bio page countPeng Tao
commit 74a6eeb44ca6174d9cc93b9b8b4d58211c57bc80 upstream. One bio can have at most BIO_MAX_PAGES pages. We should limit it bec otherwise bio_alloc will fail when there are many pages in one read/write_pagelist. Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25pnfsblock: don't spinlock when freeing block_devPeng Tao
commit 93a3844ee0f843b05a1df4b52e1a19ff26b98d24 upstream. bl_free_block_dev() may sleep. We can not call it with spinlock held. Besides, there is no need to take bm_lock as we are last user freeing bm_devlist. Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25pnfsblock: acquire im_lock in _preload_rangePeng Tao
commit 39e567ae36fe03c2b446e1b83ee3d39bea08f90b upstream. When calling _add_entry, we should take the im_lock to protect agains other modifiers. Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25fix shrink_dcache_parent() livelockMiklos Szeredi
commit eaf5f9073533cde21c7121c136f1c3f072d9cf59 upstream. Two (or more) concurrent calls of shrink_dcache_parent() on the same dentry may cause shrink_dcache_parent() to loop forever. Here's what appears to happen: 1 - CPU0: select_parent(P) finds C and puts it on dispose list, returns 1 2 - CPU1: select_parent(P) locks P->d_lock 3 - CPU0: shrink_dentry_list() locks C->d_lock dentry_kill(C) tries to lock P->d_lock but fails, unlocks C->d_lock 4 - CPU1: select_parent(P) locks C->d_lock, moves C from dispose list being processed on CPU0 to the new dispose list, returns 1 5 - CPU0: shrink_dentry_list() finds dispose list empty, returns 6 - Goto 2 with CPU0 and CPU1 switched Basically select_parent() steals the dentry from shrink_dentry_list() and thinks it found a new one, causing shrink_dentry_list() to think it's making progress and loop over and over. One way to trigger this is to make udev calls stat() on the sysfs file while it is going away. Having a file in /lib/udev/rules.d/ with only this one rule seems to the trick: ATTR{vendor}=="0x8086", ATTR{device}=="0x10ca", ENV{PCI_SLOT_NAME}="%k", ENV{MATCHADDR}="$attr{address}", RUN+="/bin/true" Then execute the following loop: while true; do echo -bond0 > /sys/class/net/bonding_masters echo +bond0 > /sys/class/net/bonding_masters echo -bond1 > /sys/class/net/bonding_masters echo +bond1 > /sys/class/net/bonding_masters done One fix would be to check all callers and prevent concurrent calls to shrink_dcache_parent(). But I think a better solution is to stop the stealing behavior. This patch adds a new dentry flag that is set when the dentry is added to the dispose list. The flag is cleared in dentry_lru_del() in case the dentry gets a new reference just before being pruned. If the dentry has this flag, select_parent() will skip it and let shrink_dentry_list() retry pruning it. With select_parent() skipping those dentries there will not be the appearance of progress (new dentries found) when there is none, hence shrink_dcache_parent() will not loop forever. Set the flag is also set in prune_dcache_sb() for consistency as suggested by Linus. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25dcache: use a dispose list in select_parentDave Chinner
commit b48f03b319ba78f3abf9a7044d1f436d8d90f4f9 upstream. select_parent currently abuses the dentry cache LRU to provide cleanup features for child dentries that need to be freed. It moves them to the tail of the LRU, then tells shrink_dcache_parent() to calls __shrink_dcache_sb to unconditionally move them to a dispose list (as DCACHE_REFERENCED is ignored). __shrink_dcache_sb() has to relock the dentries to move them off the LRU onto the dispose list, but otherwise does not touch the dentries that select_parent() moved to the tail of the LRU. It then passses the dispose list to shrink_dentry_list() which tries to free the dentries. IOWs, the use of __shrink_dcache_sb() is superfluous - we can build exactly the same list of dentries for disposal directly in select_parent() and call shrink_dentry_list() instead of calling __shrink_dcache_sb() to do that. This means that we avoid long holds on the lru lock walking the LRU moving dentries to the dispose list We also avoid the need to relock each dentry just to move it off the LRU, reducing the numebr of times we lock each dentry to dispose of them in shrink_dcache_parent() from 3 to 2 times. Further, we remove one of the two callers of __shrink_dcache_sb(). This also means that __shrink_dcache_sb can be moved into back into prune_dcache_sb() and we no longer have to handle referenced dentries conditionally, simplifying the code. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25uvcvideo: Fix integer overflow in uvc_ioctl_ctrl_map()Haogang Chen
commit 806e23e95f94a27ee445022d724060b9b45cb64a upstream. There is a potential integer overflow in uvc_ioctl_ctrl_map(). When a large xmap->menu_count is passed from the userspace, the subsequent call to kmalloc() will allocate a buffer smaller than expected. map->menu_count and map->menu_info would later be used in a loop (e.g. in uvc_query_v4l2_ctrl), which leads to out-of-bound access. The patch checks the ioctl argument and returns -EINVAL for zero or too large values in xmap->menu_count. Signed-off-by: Haogang Chen <haogangchen@gmail.com> [laurent.pinchart@ideasonboard.com Prevent excessive memory consumption] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25recordmcount: Fix handling of elf64 big-endian objects.David Daney
commit 2e885057b7f75035f0b85e02f737891482815a81 upstream. In ELF64, the sh_flags field is 64-bits wide. recordmcount was erroneously treating it as a 32-bit wide field. For little endian objects this works because the flags of interest (SHF_EXECINSTR) reside in the lower 32 bits of the word, and you get the same result with either a 32-bit or 64-bit read. Big endian objects on the other hand do not work at all with this error. The fix: Correctly treat sh_flags as 64-bits wide in elf64 objects. The symptom I observed was that my __start_mcount_loc..__stop_mcount_loc was empty even though ftrace function tracing was enabled. Link: http://lkml.kernel.org/r/1324345362-12230-1-git-send-email-ddaney.cavm@gmail.com Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25x86, UV: Update Boot messages for SGI UV2 platformJack Steiner
commit da517a08ac5913cd80ce3507cddd00f2a091b13c upstream. SGI UV systems print a message during boot: UV: Found <num> blades Due to packaging changes, the blade count is not accurate for on the next generation of the platform. This patch corrects the count. Signed-off-by: Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/20120106191900.GA19772@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25fsnotify: don't BUG in fsnotify_destroy_mark()Miklos Szeredi
commit fed474857efbed79cd390d0aee224231ca718f63 upstream. Removing the parent of a watched file results in "kernel BUG at fs/notify/mark.c:139". To reproduce add "-w /tmp/audit/dir/watched_file" to audit.rules rm -rf /tmp/audit/dir This is caused by fsnotify_destroy_mark() being called without an extra reference taken by the caller. Reported by Francesco Cosoleto here: https://bugzilla.novell.com/show_bug.cgi?id=689860 Fix by removing the BUG_ON and adding a comment about not accessing mark after the iput. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25nfsd: Fix oops when parsing a 0 length exportSasha Levin
commit b2ea70afade7080360ac55c4e64ff7a5fafdb67b upstream. expkey_parse() oopses when handling a 0 length export. This is easily triggerable from usermode by writing 0 bytes into '/proc/[proc id]/net/rpc/nfsd.fh/channel'. Below is the log: [ 1402.286893] BUG: unable to handle kernel paging request at ffff880077c49fff [ 1402.287632] IP: [<ffffffff812b4b99>] expkey_parse+0x28/0x2e1 [ 1402.287632] PGD 2206063 PUD 1fdfd067 PMD 1ffbc067 PTE 8000000077c49160 [ 1402.287632] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 1402.287632] CPU 1 [ 1402.287632] Pid: 20198, comm: trinity Not tainted 3.2.0-rc2-sasha-00058-gc65cd37 #6 [ 1402.287632] RIP: 0010:[<ffffffff812b4b99>] [<ffffffff812b4b99>] expkey_parse+0x28/0x2e1 [ 1402.287632] RSP: 0018:ffff880077f0fd68 EFLAGS: 00010292 [ 1402.287632] RAX: ffff880077c49fff RBX: 00000000ffffffea RCX: 0000000001043400 [ 1402.287632] RDX: 0000000000000000 RSI: ffff880077c4a000 RDI: ffffffff82283de0 [ 1402.287632] RBP: ffff880077f0fe18 R08: 0000000000000001 R09: ffff880000000000 [ 1402.287632] R10: 0000000000000000 R11: 0000000000000001 R12: ffff880077c4a000 [ 1402.287632] R13: ffffffff82283de0 R14: 0000000001043400 R15: ffffffff82283de0 [ 1402.287632] FS: 00007f25fec3f700(0000) GS:ffff88007d400000(0000) knlGS:0000000000000000 [ 1402.287632] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1402.287632] CR2: ffff880077c49fff CR3: 0000000077e1d000 CR4: 00000000000406e0 [ 1402.287632] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1402.287632] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1402.287632] Process trinity (pid: 20198, threadinfo ffff880077f0e000, task ffff880077db17b0) [ 1402.287632] Stack: [ 1402.287632] ffff880077db17b0 ffff880077c4a000 ffff880077f0fdb8 ffffffff810b411e [ 1402.287632] ffff880000000000 ffff880077db17b0 ffff880077c4a000 ffffffff82283de0 [ 1402.287632] 0000000001043400 ffffffff82283de0 ffff880077f0fde8 ffffffff81111f63 [ 1402.287632] Call Trace: [ 1402.287632] [<ffffffff810b411e>] ? lock_release+0x1af/0x1bc [ 1402.287632] [<ffffffff81111f63>] ? might_fault+0x97/0x9e [ 1402.287632] [<ffffffff81111f1a>] ? might_fault+0x4e/0x9e [ 1402.287632] [<ffffffff81a8bcf2>] cache_do_downcall+0x3e/0x4f [ 1402.287632] [<ffffffff81a8c950>] cache_write.clone.16+0xbb/0x130 [ 1402.287632] [<ffffffff81a8c9df>] ? cache_write_pipefs+0x1a/0x1a [ 1402.287632] [<ffffffff81a8c9f8>] cache_write_procfs+0x19/0x1b [ 1402.287632] [<ffffffff8118dc54>] proc_reg_write+0x8e/0xad [ 1402.287632] [<ffffffff8113fe81>] vfs_write+0xaa/0xfd [ 1402.287632] [<ffffffff8114142d>] ? fget_light+0x35/0x9e [ 1402.287632] [<ffffffff8113ff8b>] sys_write+0x48/0x6f [ 1402.287632] [<ffffffff81bbdb92>] system_call_fastpath+0x16/0x1b [ 1402.287632] Code: c0 c9 c3 55 48 63 d2 48 89 e5 48 8d 44 32 ff 41 57 41 56 41 55 41 54 53 bb ea ff ff ff 48 81 ec 88 00 00 00 48 89 b5 58 ff ff ff [ 1402.287632] 38 0a 0f 85 89 02 00 00 c6 00 00 48 8b 3d 44 4a e5 01 48 85 [ 1402.287632] RIP [<ffffffff812b4b99>] expkey_parse+0x28/0x2e1 [ 1402.287632] RSP <ffff880077f0fd68> [ 1402.287632] CR2: ffff880077c49fff [ 1402.287632] ---[ end trace 368ef53ff773a5e3 ]--- Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: linux-nfs@vger.kernel.org Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25nfsd4: fix lockowner matchingJ. Bruce Fields
commit b93d87c19821ba7d3ee11557403d782e541071ad upstream. Lockowners are looked up by file as well as by owner, but we were forgetting to do a comparison on the file. This could cause an incorrect result from lockt. (Note looking up the inode from the lockowner is pretty awkward here. The data structures need fixing.) Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25svcrpc: avoid memory-corruption on pool shutdownJ. Bruce Fields
commit b4f36f88b3ee7cf26bf0be84e6c7fc15f84dcb71 upstream. Socket callbacks use svc_xprt_enqueue() to add an xprt to a pool->sp_sockets list. In normal operation a server thread will later come along and take the xprt off that list. On shutdown, after all the threads have exited, we instead manually walk the sv_tempsocks and sv_permsocks lists to find all the xprt's and delete them. So the sp_sockets lists don't really matter any more. As a result, we've mostly just ignored them and hoped they would go away. Which has gotten us into trouble; witness for example ebc63e531cc6 "svcrpc: fix list-corrupting race on nfsd shutdown", the result of Ben Greear noticing that a still-running svc_xprt_enqueue() could re-add an xprt to an sp_sockets list just before it was deleted. The fix was to remove it from the list at the end of svc_delete_xprt(). But that only made corruption less likely--I can see nothing that prevents a svc_xprt_enqueue() from adding another xprt to the list at the same moment that we're removing this xprt from the list. In fact, despite the earlier xpo_detach(), I don't even see what guarantees that svc_xprt_enqueue() couldn't still be running on this xprt. So, instead, note that svc_xprt_enqueue() essentially does: lock sp_lock if XPT_BUSY unset add to sp_sockets unlock sp_lock So, if we do: set XPT_BUSY on every xprt. Empty every sp_sockets list, under the sp_socks locks. Then we're left knowing that the sp_sockets lists are all empty and will stay that way, since any svc_xprt_enqueue() will check XPT_BUSY under the sp_lock and see it set. And *then* we can continue deleting the xprt's. (Thanks to Jeff Layton for being correctly suspicious of this code....) Cc: Ben Greear <greearb@candelatech.com> Cc: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25svcrpc: destroy server sockets all at onceJ. Bruce Fields
commit 2fefb8a09e7ed251ae8996e0c69066e74c5aa560 upstream. There's no reason I can see that we need to call sv_shutdown between closing the two lists of sockets. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25svcrpc: fix double-free on shutdown of nfsd after changing pool modeJ. Bruce Fields
commit 61c8504c428edcebf23b97775a129c5b393a302b upstream. The pool_to and to_pool fields of the global svc_pool_map are freed on shutdown, but are initialized in nfsd startup only in the SVC_POOL_PERCPU and SVC_POOL_PERNODE cases. They *are* initialized to zero on kernel startup. So as long as you use only SVC_POOL_GLOBAL (the default), this will never be a problem. You're also OK if you only ever use SVC_POOL_PERCPU or SVC_POOL_PERNODE. However, the following sequence events leads to a double-free: 1. set SVC_POOL_PERCPU or SVC_POOL_PERNODE 2. start nfsd: both fields are initialized. 3. shutdown nfsd: both fields are freed. 4. set SVC_POOL_GLOBAL 5. start nfsd: the fields are left untouched. 6. shutdown nfsd: now we try to free them again. Step 4 is actually unnecessary, since (for some bizarre reason), nfsd automatically resets the pool mode to SVC_POOL_GLOBAL on shutdown. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25kconfig/streamline-config.pl: Fix parsing Makefile with variablesSteven Rostedt
commit 364212fddaaa60c5a64f67a0f5624ad996ecc8a0 upstream. Thomas Lange reported that when he did a 'make localmodconfig', his config was missing the brcmsmac driver, even though he had the module loaded. Looking into this, I found the file: drivers/net/wireless/brcm80211/brcmsmac/Makefile had the following in the Makefile: MODULEPFX := brcmsmac obj-$(CONFIG_BRCMSMAC) += $(MODULEPFX).o The way streamline-config.pl works, is parsing all the obj-$(CONFIG_FOO) += foo.o lines to find that CONFIG_FOO belongs to the module foo.ko. But in this case, the brcmsmac.o was not used, but a variable in its place. By changing streamline-config.pl to remember defined variables in Makefiles and substituting them when they are used in the obj-X lines, allows Thomas (and others) to have their brcmsmac module stay configured when it is loaded and running "make localmodconfig". Reported-by: Thomas Lange <thomas-lange2@gmx.de> Tested-by: Thomas Lange <thomas-lange2@gmx.de> Cc: Arend van Spriel <arend@broadcom.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25kconfig/streamline-config.pl: Simplify backslash line concatinationSteven Rostedt
commit d060d963e88f3e990cec2fe5214de49de9a49eca upstream. Simplify the way lines ending with backslashes (continuation) in Makefiles is parsed. This is needed to implement a necessary fix. Tested-by: Thomas Lange <thomas-lange2@gmx.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25ftrace: Fix unregister ftrace_ops accountingJiri Olsa
commit 30fb6aa74011dcf595f306ca2727254d708b786e upstream. Multiple users of the function tracer can register their functions with the ftrace_ops structure. The accounting within ftrace will update the counter on each function record that is being traced. When the ftrace_ops filtering adds or removes functions, the function records will be updated accordingly if the ftrace_ops is still registered. When a ftrace_ops is removed, the counter of the function records, that the ftrace_ops traces, are decremented. When they reach zero the functions that they represent are modified to stop calling the mcount code. When changes are made, the code is updated via stop_machine() with a command passed to the function to tell it what to do. There is an ENABLE and DISABLE command that tells the called function to enable or disable the functions. But the ENABLE is really a misnomer as it should just update the records, as records that have been enabled and now have a count of zero should be disabled. The DISABLE command is used to disable all functions regardless of their counter values. This is the big off switch and is not the complement of the ENABLE command. To make matters worse, when a ftrace_ops is unregistered and there is another ftrace_ops registered, neither the DISABLE nor the ENABLE command are set when calling into the stop_machine() function and the records will not be updated to match their counter. A command is passed to that function that will update the mcount code to call the registered callback directly if it is the only one left. This means that the ftrace_ops that is still registered will have its callback called by all functions that have been set for it as well as the ftrace_ops that was just unregistered. Here's a way to trigger this bug. Compile the kernel with CONFIG_FUNCTION_PROFILER set and with CONFIG_FUNCTION_GRAPH not set: CONFIG_FUNCTION_PROFILER=y # CONFIG_FUNCTION_GRAPH is not set This will force the function profiler to use the function tracer instead of the function graph tracer. # cd /sys/kernel/debug/tracing # echo schedule > set_ftrace_filter # echo function > current_tracer # cat set_ftrace_filter schedule # cat trace # tracer: nop # # entries-in-buffer/entries-written: 692/68108025 #P:4 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | kworker/0:2-909 [000] .... 531.235574: schedule <-worker_thread <idle>-0 [001] .N.. 531.235575: schedule <-cpu_idle kworker/0:2-909 [000] .... 531.235597: schedule <-worker_thread sshd-2563 [001] .... 531.235647: schedule <-schedule_hrtimeout_range_clock # echo 1 > function_profile_enabled # echo 0 > function_porfile_enabled # cat set_ftrace_filter schedule # cat trace # tracer: function # # entries-in-buffer/entries-written: 159701/118821262 #P:4 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | <idle>-0 [002] ...1 604.870655: local_touch_nmi <-cpu_idle <idle>-0 [002] d..1 604.870655: enter_idle <-cpu_idle <idle>-0 [002] d..1 604.870656: atomic_notifier_call_chain <-enter_idle <idle>-0 [002] d..1 604.870656: __atomic_notifier_call_chain <-atomic_notifier_call_chain The same problem could have happened with the trace_probe_ops, but they are modified with the set_frace_filter file which does the update at closure of the file. The simple solution is to change ENABLE to UPDATE and call it every time an ftrace_ops is unregistered. Link: http://lkml.kernel.org/r/1323105776-26961-3-git-send-email-jolsa@redhat.com Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25Unused iocbs in a batch should not be accounted as active.Gleb Natapov
commit 69e4747ee9727d660b88d7e1efe0f4afcb35db1b upstream. Since commit 080d676de095 ("aio: allocate kiocbs in batches") iocbs are allocated in a batch during processing of first iocbs. All iocbs in a batch are automatically added to ctx->active_reqs list and accounted in ctx->reqs_active. If one (not the last one) of iocbs submitted by an user fails, further iocbs are not processed, but they are still present in ctx->active_reqs and accounted in ctx->reqs_active. This causes process to stuck in a D state in wait_for_all_aios() on exit since ctx->reqs_active will never go down to zero. Furthermore since kiocb_batch_free() frees iocb without removing it from active_reqs list the list become corrupted which may cause oops. Fix this by removing iocb from ctx->active_reqs and updating ctx->reqs_active in kiocb_batch_free(). Signed-off-by: Gleb Natapov <gleb@redhat.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25V4L/DVB: v4l2-ioctl: integer overflow in video_usercopy()Dan Carpenter
commit 6c06108be53ca5e94d8b0e93883d534dd9079646 upstream. If ctrls->count is too high the multiplication could overflow and array_size would be lower than expected. Mauro and Hans Verkuil suggested that we cap it at 1024. That comes from the maximum number of controls with lots of room for expantion. $ grep V4L2_CID include/linux/videodev2.h | wc -l 211 Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25mmc: sd: Fix SDR12 timing regressionAlexander Elbs
commit dd8df17fe83483d7ea06ff229895e35a42071599 upstream. This patch fixes a failure to recognize SD cards reported on a Dell Vostro with O2 Micro SD card reader. Patch 49c468f ("mmc: sd: add support for uhs bus speed mode selection") caused the problem, by setting the SDHCI_CTRL_HISPD flag even for legacy timings. Signed-off-by: Alexander Elbs <alex@segv.de> Acked-by: Philip Rakity <prakity@marvell.com> Acked-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25mmc: sdhci: Fix tuning timer incorrect setting when suspending hostAaron Lu
commit c6ced0db08010ed75df221a2946c5228454b38d5 upstream. When suspending host, the tuning timer shoule be deactivated. And the HOST_NEEDS_TUNING flag should be set after tuning timer is deactivated. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Aaron Lu <aaron.lu@amd.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25mmc: core: Fix voltage select in DDR modeGirish K S
commit 913047e9e5787a90696533a9f109552b7694ecc9 upstream. This patch fixes the wrong comparison before setting the interface voltage in DDR mode. The assignment to the variable ddr before comaprison is either ddr = MMC_1_2V_DDR_MODE; or ddr == MMC_1_8V_DDR_MODE. But the comparison is done with the extended csd value if ddr == EXT_CSD_CARD_TYPE_DDR_1_2V. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Acked-by: Subhash Jadavani <subhashj@codeaurora.org> Acked-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25i2c: Fix error value returned by several bus driversJean Delvare
commit 7c1f59c9d5caf3a84f35549b5d58f3c055a68da5 upstream. When adding checks for ACPI resource conflicts to many bus drivers, not enough attention was paid to the error paths, and for several drivers this causes 0 to be returned on error in some cases. Fix this by properly returning a non-zero value on every error. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25UBIFS: make debugging messages light againArtem Bityutskiy
commit 1f5d78dc4823a85f112aaa2d0f17624f8c2a6c52 upstream. We switch to dynamic debugging in commit 56e46742e846e4de167dde0e1e1071ace1c882a5 but did not take into account that now we do not control anymore whether a specific message is enabled or not. So now we lock the "dbg_lock" and release it in every debugging macro, which make them not so light-weight. This commit removes the "dbg_lock" protection from the debugging macros to fix the issue. The downside is that now our DBGKEY() stuff is broken, but this is not critical at all and will be fixed later. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25UBIFS: fix debugging messagesArtem Bityutskiy
commit d34315da9146253351146140ea4b277193ee5e5f upstream. Patch 56e46742e846e4de167dde0e1e1071ace1c882a5 broke UBIFS debugging messages: before that commit when UBIFS debugging was enabled, users saw few useful debugging messages after mount. However, that patch turned 'dbg_msg()' into 'pr_debug()', so to enable the debugging messages users have to enable them first via /sys/kernel/debug/dynamic_debug/control, which is very impractical. This commit makes 'dbg_msg()' to use 'printk()' instead of 'pr_debug()', just as it was before the breakage. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25UBI: make vid_hdr non-staticRichard Weinberger
commit 6bdccffe8c4268d02f71873102131fb6ed37ed9a upstream. Remove 'static' modifier from the 'vid_hdr' local variable. I do not know how it slipped in, but this is a bug and will break UBI if someone attaches 2 UBI volumes at the same time. Artem: amended teh commit message, added -stable. Signed-off-by: Richard Weinberger <rw@linutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25UBI: fix debugging messagesArtem Bityutskiy
commit 72f0d453d81d35087b1d3ad7c8285628c2be6e1d upstream. Patch ab50ff684707031ed4bad2fdd313208ae392e5bb broke UBI debugging messages: before that commit when UBI debugging was enabled, users saw few useful debugging messages after attaching an MTD device. However, that patch turned 'dbg_msg()' into 'pr_debug()', so to enable the debugging messages users have to enable them first via /sys/kernel/debug/dynamic_debug/control, which is very impractical. This commit makes 'dbg_msg()' to use 'printk()' instead of 'pr_debug()', just as it was before the breakage. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25UBI: fix nameless volumes handlingRichard Weinberger
commit 4a59c797a18917a5cf3ff7ade296b46134d91e6a upstream. Currently it's possible to create a volume without a name. E.g: ubimkvol -n 32 -s 2MiB -t static /dev/ubi0 -N "" After that vtbl_check() will always fail because it does not permit empty strings. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25x86: Fix mmap random address rangeLudwig Nussel
commit 9af0c7a6fa860698d080481f24a342ba74b68982 upstream. On x86_32 casting the unsigned int result of get_random_int() to long may result in a negative value. On x86_32 the range of mmap_rnd() therefore was -255 to 255. The 32bit mode on x86_64 used 0 to 255 as intended. The bug was introduced by 675a081 ("x86: unify mmap_{32|64}.c") in January 2008. Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: harvey.harrison@gmail.com Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/201111152246.pAFMklOB028527@wpaz5.hot.corp.google.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25memcg: add mem_cgroup_replace_page_cache() to fix LRU issueKAMEZAWA Hiroyuki
commit ab936cbcd02072a34b60d268f94440fd5cf1970b upstream. Commit ef6a3c6311 ("mm: add replace_page_cache_page() function") added a function replace_page_cache_page(). This function replaces a page in the radix-tree with a new page. WHen doing this, memory cgroup needs to fix up the accounting information. memcg need to check PCG_USED bit etc. In some(many?) cases, 'newpage' is on LRU before calling replace_page_cache(). So, memcg's LRU accounting information should be fixed, too. This patch adds mem_cgroup_replace_page_cache() and removes the old hooks. In that function, old pages will be unaccounted without touching res_counter and new page will be accounted to the memcg (of old page). WHen overwriting pc->mem_cgroup of newpage, take zone->lru_lock and avoid races with LRU handling. Background: replace_page_cache_page() is called by FUSE code in its splice() handling. Here, 'newpage' is replacing oldpage but this newpage is not a newly allocated page and may be on LRU. LRU mis-accounting will be critical for memory cgroup because rmdir() checks the whole LRU is empty and there is no account leak. If a page is on the other LRU than it should be, rmdir() will fail. This bug was added in March 2011, but no bug report yet. I guess there are not many people who use memcg and FUSE at the same time with upstream kernels. The result of this bug is that admin cannot destroy a memcg because of account leak. So, no panic, no deadlock. And, even if an active cgroup exist, umount can succseed. So no problem at shutdown. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25ath9k: Fix regression in channelwidth switch at the same channelRajkumar Manoharan
commit 1a19f77f3642b8194ad9cf55548cc5d92e841766 upstream. The commit "ath9k: Fix invalid noisefloor reading due to channel update" preserves the current channel noisefloor readings before updating channel type at the same channel index. It is also updating the curchan pointer. As survey updation is also referring curchan pointer to fetch the appropriate index, which might leads to invalid memory access. This patch partially reverts the change and stores the noise floor history buffer before updating channel type w/o updating curchan. Cc: Gary Morain <gmorain@google.com> Cc: Paul Stewart <pstew@google.com> Reported-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25mac80211: fix rx->key NULL pointer dereference in promiscuous modeStanislaw Gruszka
commit 1140afa862842ac3e56678693050760edc4ecde9 upstream. Since: commit 816c04fe7ef01dd9649f5ccfe796474db8708be5 Author: Christian Lamparter <chunkeey@googlemail.com> Date: Sat Apr 30 15:24:30 2011 +0200 mac80211: consolidate MIC failure report handling is possible to that we dereference rx->key == NULL when driver set RX_FLAG_MMIC_STRIPPED and not RX_FLAG_IV_STRIPPED and we are in promiscuous mode. This happen with rt73usb and rt61pci at least. Before the commit we always check rx->key against NULL, so I assume fix should be done in mac80211 (also mic_fail path has similar check). References: https://bugzilla.redhat.com/show_bug.cgi?id=769766 http://rt2x00.serialmonkey.com/pipermail/users_rt2x00.serialmonkey.com/2012-January/004395.html Reported-by: Stuart D Gathman <stuart@gathman.org> Reported-by: Kai Wohlfahrt <kai.scorpio@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25rtl8192se: Fix BUG caused by failure to check skb allocationLarry Finger
commit d90db4b12bc1b9b8a787ef28550fdb767ee25a49 upstream. When downloading firmware into the device, the driver fails to check the return when allocating an skb. When the allocation fails, a BUG can be generated, as seen in https://bugzilla.redhat.com/show_bug.cgi?id=771656. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25include/linux/crash_dump.h needs elf.hFabio Estevam
commit 1f536b9e9f85456df93614b3c2f6a1a2b7d7cb9b upstream. Building an ARM target we get the following warnings: CC arch/arm/kernel/setup.o In file included from arch/arm/kernel/setup.c:39: arch/arm/include/asm/elf.h:102:1: warning: "vmcore_elf64_check_arch" redefined In file included from arch/arm/kernel/setup.c:24: include/linux/crash_dump.h:30:1: warning: this is the location of the previous definition Quoting Russell King: "linux/crash_dump.h makes no attempt to include asm/elf.h, but it depends on stuff in asm/elf.h to determine how stuff inside this file is defined at parse time. So, if asm/elf.h is included after linux/crash_dump.h or not at all, you get a different result from the situation where asm/elf.h is included before." So add elf.h header to crash_dump.h to avoid this problem. The original discussion about this can be found at: http://www.spinics.net/lists/arm-kernel/msg154113.html Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-28 14:26:42 +0000