linux-toradex.git - Linux kernel for Apalis and Colibri modules

Age	Commit message (Expand)	Author
2017-01-10	rfkill-regulator: add dt support	Troy Kisky
2017-01-10	nit6xlite_defconfig: initial addition	Troy Kisky
2017-01-10	ov5640_mipi: simplify mipi clock wait loop	Troy Kisky
2017-01-10	mxc_hdmi: enable overflow interrupt after initialization complete	Troy Kisky
2017-01-10	mxc_hdmi: default to keep-alive (don't detect disconnect)	Eric Nelson
2017-01-10	Add support for DVI monitors	Robert Winkler
2017-01-10	ov5640_mipi: print message on gpio request failure	Troy Kisky
2017-01-10	mxc_v4l2_capture: add ipu_id to sensor_data	Troy Kisky
2017-01-10	ov5640_mipi: add remove *2 and add error checking to OV5640_get_sysclk	Troy Kisky
2017-01-10	ov5640_mipi: add imx6 mipi/parallel selection	Troy Kisky
2017-01-10	ov5640: add pwm option for mclk	Troy Kisky
2017-01-10	ov5642: add imx6 mipi/parallel selection	Troy Kisky
2017-01-10	fix camera power down	Troy Kisky
2017-01-10	add ar1021 touchscreen	Troy Kisky
2017-01-10	mxc_v4l2_capture: fix VIDIOC_ENUMSTD, return -EINVAL if index > 0	Troy Kisky
2017-01-10	mxc_ipuv3_fb: unblank displays at init	Troy Kisky
2017-01-10	add nitrogen6x_defconfig	Troy Kisky
2017-01-10	ARM: imx: adjust vring location to be at 256MB boundary	Stefan Agner
2017-01-10	arm: dts: imx7: decrease DMA CMA to 128MB	Stefan Agner
2017-01-10	ARM: dts: imx7-colibri: Fix use of pull-up by SODIMM 45	Sanchayan Maity
2017-01-10	ARM: colibri_imx7_defconfig: configure IPv6 SIT driver as module	Stefan Agner
2017-01-10	arm: dts: imx7: fix CAN interrupt source	Max Krummenacher
2017-01-10	ARM: imx7d: clk: add 240MHz sys main clock to init_on	Stefan Agner
2017-01-10	arm: dts: imx7: mux pad of SODIMM 169 as GPIO	Stefan Agner
2017-01-10	arm: dts: imx7: assign CAN interrupt pin explicitly	Stefan Agner
2017-01-10	arm: dts: imx7: revisit some pinmux configurations	Stefan Agner
2017-01-10	arm: dts: imx7: move standard pinctrl to module level dt	Stefan Agner
2017-01-10	arm: dts: imx7: disable pull-up on multiplexed pins	Stefan Agner
2017-01-10	ARM: configs: colibri_imx7: Enable extcon usb gpio support	Sanchayan Maity
2017-01-10	ARM: dts: imx7d/imx7s-colibri: Enable usb device/host switch using extcon	Sanchayan Maity
2017-01-10	usb: chipidea: Use extcon framework for ID and VBUS detection	Sanchayan Maity
2017-01-10	ARM: dts: imx7-colibri: use VGA resolution by default	Stefan Agner
2017-01-10	ARM: dts: imx7-colibri: disable internal RTC on i.MX 7Solo	Stefan Agner
2017-01-10	arm: dts: imx7: Add support for PWM polarity control	Bhuvanchandra DV
2017-01-10	pwm: imx: Add support for polarity control	Bhuvanchandra DV
2017-01-10	arm: dts: imx7-colibri: Use enable-gpios for BL_ON	Bhuvanchandra DV
2017-01-10	ARM: dts: imx7-colibri: add ENET sleep state	Stefan Agner
2017-01-10	ARM: dts: imx7-colibri: add GPIO wakeup key	Stefan Agner
2017-01-10	ARM: dts: imx7-colibri: explicitly disable write-protect	Stefan Agner
2017-01-10	cpufreq: imx7: don't support OPP table from platform data	Stefan Agner
2017-01-10	ARM: dts: imx7-colibri: rename display node	Stefan Agner
2017-01-10	ARM: dts: imx7-colibri: make use of the native-mode property	Stefan Agner
2017-01-10	video: fbdev: mxsfb: honor native-mode	Stefan Agner
2017-01-10	video: mxsfb: simplify parsing	Stefan Agner
2017-01-10	ARM: dts: imx7-colibri: add VBUS regulator also to OTG port	Stefan Agner
2017-01-10	Revert "sgtl5000.c: HACK, defer probe when I2C not yet running"	Stefan Agner
2017-01-10	ARM: dts: imx7-colibri: select MCLK in SGTL5000 node	Stefan Agner
2017-01-10	ARM: dts: imx7-colibri: add MCLK pinmux to codec	Stefan Agner
2017-01-10	ARM: colibri_imx7_defconfig: add Fusion and GPIO reset	Stefan Agner
2017-01-10	ARM: dts: imx7-colibri: add TouchRevolution multitouch controller	Stefan Agner