summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-11-09usb: musb: fail unaligned DMA transfers on v1.8 and aboveAnand Gadiyar
The Inventra DMA engine in version 1.8 and later of the MUSB controller cannot handle DMA addresses that are not aligned to a 4 byte boundary. It ends up ignoring the last two bits programmed in the DMA_ADDR register. This is a deliberate design change in the controller and is documented in the programming guide. Earlier versions of the controller could handle these accesses just fine. Fail dma_channel_program if we see an unaligned address when using the newer controllers, so that the caller can carry out the transfer using PIO mode. (Current callers already have this backup path in place). Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Tested-by: Ming Lei <tom.leiming@gmail.com> Cc: Ajay Kumar Gupta <ajay.gupta@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-08usb: musb: gadget: kill duplicate code in musb_gadget_queue()Sergei Shtylyov
musb_gadget_queue() checks for '!req->buf' condition twice: in the second case the code is both duplicated and unreachable as the first check returns early. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05usb: musb: Fix handling of spurious SESSREQHeikki Krogerus
Rely on VBUS being valid on top off B device. Signed-off-by: Heikki Krogerus <heikki.krogerus@nokia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05usb: musb: fix kernel oops when loading musb_hdrc module for the 2nd timeMing Lei
musb driver still may write MUSB_DEVCTL register after clock is disabled in musb_platform_exit, which may cause the kernel oops[1] when musb_hdrc module is loaded for the 2nd time. The patch fixes the kernel oops in this case. [1] kernel oops when loading musb_hdrc module for the 2nd time [ 93.380279] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=5 [ 93.387847] bus: 'platform': add driver musb_hdrc [ 93.388153] bus: 'platform': driver_probe_device: matched device musb_hdrc with driver musb_hdrc [ 93.388183] bus: 'platform': really_probe: probing driver musb_hdrc with device musb_hdrc [ 93.405090] HS USB OTG: revision 0x33, sysconfig 0x2010, sysstatus 0x1, intrfsel 0x1, simenable 0x0 [ 93.405364] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 93.405395] musb_hdrc: MHDRC RTL version 1.400 [ 93.405426] musb_hdrc: setup fifo_mode 3 [ 93.405456] musb_hdrc: 7/31 max ep, 3648/16384 memory [ 93.405487] musb_core_init 1524: musb_hdrc: hw_ep 0shared, max 64 [ 93.405487] musb_core_init 1524: musb_hdrc: hw_ep 1tx, doublebuffer, max 512 [ 93.405517] musb_core_init 1533: musb_hdrc: hw_ep 1rx, doublebuffer, max 512 [ 93.405548] musb_core_init 1524: musb_hdrc: hw_ep 2tx, max 512 [ 93.405578] musb_core_init 1533: musb_hdrc: hw_ep 2rx, max 512 [ 93.405578] musb_core_init 1524: musb_hdrc: hw_ep 3shared, max 256 [ 93.405609] musb_core_init 1524: musb_hdrc: hw_ep 4shared, max 256 [ 93.405853] musb_platform_try_idle 133: b_idle inactive, for idle timer for 7 ms [ 93.405944] device: 'gadget': device_add [ 93.406921] PM: Adding info for No Bus:gadget [ 93.406951] musb_init_controller 2136: OTG mode, status 0, dev80 [ 93.407379] musb_do_idle 51: musb_do_idle: state=1 [ 93.408233] musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 [ 93.416656] driver: 'musb_hdrc': driver_bound: bound to device 'musb_hdrc' [ 93.416687] bus: 'platform': really_probe: bound device musb_hdrc to driver musb_hdrc [ 124.486938] bus: 'platform': remove driver musb_hdrc [ 124.490509] twl4030_usb twl4030_usb: twl4030_phy_suspend [ 124.491424] device: 'gadget': device_unregister [ 124.491424] PM: Removing info for No Bus:gadget [ 124.495269] gadget: musb_gadget_release [ 124.498992] driver: 'musb_hdrc': driver_release [ 129.569366] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=5 [ 129.576934] bus: 'platform': add driver musb_hdrc [ 129.577209] bus: 'platform': driver_probe_device: matched device musb_hdrc with driver musb_hdrc [ 129.577239] bus: 'platform': really_probe: probing driver musb_hdrc with device musb_hdrc [ 129.592651] twl4030_usb twl4030_usb: twl4030_phy_resume [ 129.592681] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab404 [ 129.600830] Internal error: : 1028 [#1] [ 129.604858] last sysfs file: /sys/devices/platform/i2c_omap.3/i2c-3/i2c-dev/i2c-3/dev [ 129.613067] Modules linked in: musb_hdrc(+) [last unloaded: musb_hdrc] [ 129.619964] CPU: 0 Not tainted (2.6.36-next-20101021+ #372) [ 129.626281] PC is at musb_platform_init+0xb0/0x1c8 [musb_hdrc] [ 129.632415] LR is at mark_held_locks+0x64/0x94 [ 129.637084] pc : [<bf032198>] lr : [<c00ad7c4>] psr: 20000013 [ 129.637084] sp : c6d5fcb0 ip : c6d5fc38 fp : c6d5fcd4 [ 129.649139] r10: c6e72180 r9 : fa0ab000 r8 : c05612e8 [ 129.654602] r7 : 0000005c r6 : c0559cc8 r5 : c6e72180 r4 : c0561548 [ 129.661468] r3 : 04d60047 r2 : fa0ab000 r1 : c07169d8 r0 : 00000000 [ 129.668304] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 129.675811] Control: 10c5387d Table: 86e4c019 DAC: 00000015 [ 129.681823] Process insmod (pid: 554, stack limit = 0xc6d5e2f0) [ 129.688049] Stack: (0xc6d5fcb0 to 0xc6d60000) [ 129.692626] fca0: fa0ab000 c0555c54 c6d5fcd4 c0561548 [ 129.701202] fcc0: 00000003 c05612e0 c6d5fe04 c6d5fcd8 bf03140c bf0320f4 c6d5fd9c c6d5fce8 [ 129.709808] fce0: c015cb94 c041448c c06d9d10 ffffffff c6d5fd14 c6d5fd00 c00adbec c6d5fd40 [ 129.718383] fd00: c015d478 c6d5fdb0 c6d5fd24 c00a9d18 c6d5e000 60000013 bf02a4ac c05612bc [ 129.726989] fd20: c0414fb4 c00a9cf0 c6d5fd54 c6d5fd38 c015bbdc c0244280 c6e8b7b0 c7929330 [ 129.735565] fd40: c6d5fdb0 c6d5fdb0 c6d5fd7c c6e7227c c015c010 c015bb90 c015c2ac c6d5fdb0 [ 129.744171] fd60: c7929330 c6d5fdb0 c7929330 c6e8b7b0 c6d5fd9c 00000000 c7929330 c6e8b7b0 [ 129.752746] fd80: c6d5fdb0 00000000 00000001 00000000 c6d5fde4 c6d5fda0 c015d478 c015cb74 [ 129.761322] fda0: c056138c 00000000 c6d5fdcc c6d5fdb8 c7929330 00000000 c056138c c05612e8 [ 129.769927] fdc0: 00000000 c05612f0 c0c5d62c c06f6e00 c73217c0 00000000 c6d5fdf4 c05612e8 [ 129.778503] fde0: c05612e8 bf02a2e4 c0c5d62c c06f6e00 c73217c0 00000000 c6d5fe14 c6d5fe08 [ 129.787109] fe00: c029a398 bf0311c8 c6d5fe4c c6d5fe18 c0299120 c029a384 c7919140 22222222 [ 129.795684] fe20: c6d5fe4c c05612e8 c056131c bf02a2e4 c0299278 c06f6e00 c73217c0 00000000 [ 129.804290] fe40: c6d5fe6c c6d5fe50 c0299314 c0299020 00000000 c6d5fe70 bf02a2e4 c0299278 [ 129.812866] fe60: c6d5fe94 c6d5fe70 c02987d4 c0299284 c7825060 c78c6618 00000000 bf02a2e4 [ 129.821441] fe80: c06e4c98 00000000 c6d5fea4 c6d5fe98 c0298ea4 c0298778 c6d5fedc c6d5fea8 [ 129.830047] fea0: c0297f84 c0298e8c bf02716c 000b9008 bf02a2e4 bf02a2d0 000b9008 bf02a2e4 [ 129.838623] fec0: 00000000 c06f6e00 bf031000 00000000 c6d5fefc c6d5fee0 c0299614 c0297ec0 [ 129.847229] fee0: bf02a2d0 000b9008 bf02a388 00000000 c6d5ff0c c6d5ff00 c029a868 c02995a8 [ 129.855804] ff00: c6d5ff24 c6d5ff10 c029a88c c029a818 0010281c 000b9008 c6d5ff34 c6d5ff28 [ 129.864410] ff20: bf03104c c029a878 c6d5ff7c c6d5ff38 c00463dc bf03100c 00000000 00000000 [ 129.872985] ff40: 00000000 0010281c 000b9008 bf02a388 00000000 0010281c 000b9008 bf02a388 [ 129.881591] ff60: 00000000 c00521c8 c6d5e000 00000000 c6d5ffa4 c6d5ff80 c00bb9b8 c00463ac [ 129.890167] ff80: c00adc88 c00ada68 00097e8e bebbfcf4 0010281c 00000080 00000000 c6d5ffa8 [ 129.898742] ffa0: c0052000 c00bb908 00097e8e bebbfcf4 402c9008 0010281c 000b9008 bebbfe5a [ 129.907348] ffc0: 00097e8e bebbfcf4 0010281c 00000080 00000014 bebbfcf4 bebbfe06 0000005b [ 129.915924] ffe0: bebbf9a0 bebbf990 0001a108 40263ec0 60000010 402c9008 011b0000 0000007c [ 129.924499] Backtrace: [ 129.927185] [<bf0320e8>] (musb_platform_init+0x0/0x1c8 [musb_hdrc]) from [<bf03140c>] (musb_probe+0x250/0xf2c [musb_hdrc]) [ 129.938781] r6:c05612e0 r5:00000003 r4:c0561548 [ 129.943695] [<bf0311bc>] (musb_probe+0x0/0xf2c [musb_hdrc]) from [<c029a398>] (platform_drv_probe+0x20/0x24) [ 129.954040] [<c029a378>] (platform_drv_probe+0x0/0x24) from [<c0299120>] (driver_probe_device+0x10c/0x264) [ 129.964172] [<c0299014>] (driver_probe_device+0x0/0x264) from [<c0299314>] (__driver_attach+0x9c/0xa0) [ 129.973968] [<c0299278>] (__driver_attach+0x0/0xa0) from [<c02987d4>] (bus_for_each_dev+0x68/0x94) [ 129.983367] r7:c0299278 r6:bf02a2e4 r5:c6d5fe70 r4:00000000 [ 129.989349] [<c029876c>] (bus_for_each_dev+0x0/0x94) from [<c0298ea4>] (driver_attach+0x24/0x28) [ 129.998565] r7:00000000 r6:c06e4c98 r5:bf02a2e4 r4:00000000 [ 130.004547] [<c0298e80>] (driver_attach+0x0/0x28) from [<c0297f84>] (bus_add_driver+0xd0/0x274) [ 130.013671] [<c0297eb4>] (bus_add_driver+0x0/0x274) from [<c0299614>] (driver_register+0x78/0x158) [ 130.023101] [<c029959c>] (driver_register+0x0/0x158) from [<c029a868>] (platform_driver_register+0x5c/0x60) [ 130.033325] r7:00000000 r6:bf02a388 r5:000b9008 r4:bf02a2d0 [ 130.039276] [<c029a80c>] (platform_driver_register+0x0/0x60) from [<c029a88c>] (platform_driver_probe+0x20/0xa8) [ 130.050018] [<c029a86c>] (platform_driver_probe+0x0/0xa8) from [<bf03104c>] (musb_init+0x4c/0x54 [musb_hdrc]) [ 130.060424] r5:000b9008 r4:0010281c [ 130.064239] [<bf031000>] (musb_init+0x0/0x54 [musb_hdrc]) from [<c00463dc>] (do_one_initcall+0x3c/0x1c0) [ 130.074218] [<c00463a0>] (do_one_initcall+0x0/0x1c0) from [<c00bb9b8>] (sys_init_module+0xbc/0x1d0) [ 130.083709] [<c00bb8fc>] (sys_init_module+0x0/0x1d0) from [<c0052000>] (ret_fast_syscall+0x0/0x3c) [ 130.093109] r7:00000080 r6:0010281c r5:bebbfcf4 r4:00097e8e [ 130.099090] Code: 0a000046 e3a01001 e12fff33 e59520e4 (e5923404) [ 130.105621] ---[ end trace 1d0bd69deb79164d ]--- Cc: Ajay Kumar Gupta <ajay.gupta@ti.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: stable@kernel.org Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05USB: musb: blackfin: push clkin value to platform resourcesBob Liu
In order to not touch the driver file for different xtal usage, push the clkin value to board file and calculate the register value instead of hardcoding it. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05USB: musb: blackfin: fix dynamic device<->host changingBob Liu
We need to restart the timer in order to recognize USB devices in host-only mode. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05USB: musb: blackfin: pm: make it workBob Liu
Split the USB MMR init steps out into a helper func that both the platform init and the resume code may call. Then while suspending, the gpio_vrsel will change from high to low which will generate a wakeup event and resume the system immediately, so we need to manually drive it low before we sleep. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05USB: musb: pm: don't rely fully on clock supportBob Liu
Since clock support is optional across processors, don't make the whole musb pm paths depend upon it. Just conditionalize the clock accesses. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05USB: musb: blackfin: fix musb_read_txhubport() definitionIan Jeffray
The new MUSB power code needs musb_read_txhubport() to return a value (so stub it as 0 like the other Blackfin hub funcs). Signed-off-by: Ian Jeffray <ian@jeffray.co.uk> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05USB: musb: gadget: fix MUSB_TXMAXP and MUSB_RXMAXP configurationMing Lei
Commit 9f445cb29918dc488b7a9a92ef018599cce33df7[USB: musb: disable double buffering for older RTL versions] tries to disable double buffer mode by writing endpoint hw max packet size to TXMAP/RXMAP. First the approach can break full speed and cause overflow problems. We should always set those registers with the actual max packet size from endpoint descriptor. Second, the problem describe by commit 9f445cb29918dc488b7a9a92ef018599cce33df7 was caused by musb gadget driver; nothing to do with RTL revision as originaly suspected. The real fix to the problem is to always use actual max packet size from endpoint descriptor to config TXMAP/RXMAP registers. Cc: Cliff Cai <cliff.cai@analog.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: stable@kernel.org Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05usb: musb: don't leave PHY enabled on shutdown()Grazvydas Ignotas
Some actions like musb_platform_exit are only performed on module removal and not on shutdown, which results in PHY being left enabled on reboot at least. This is sometimes causing strange failures after reboot (observed on OMAP3 pandora board), when DEVCTL does not report VBUS state correctly due to unknown reasons (possibly because of communication issues between musb IP and PHY). Running musb_platform_exit before reset seems to resolve that issue. Move some exit code from musb_remove() to musb_shutdown() so that it is performed on both module removal and shutdown/reset. Also convert the host check so that it doesn't need #ifdef. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05usb: musb: musb_gadget: fix resource leakage in error pathRahul Ruikar
In function musb_gadget_setup() call put_device() when device_register() fails. Signed-off-by: Rahul Ruikar <rahul.ruikar@gmail.com> Acked-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-05usb: musb: gadget: fix dma mode 0 in double buffer Rx caseMing Lei
1, In Rx double buffer case, FIFO may have two packets, so rxstate should be called to unload fifo if RXPKTRDY is set even the current request has not been completed. 2, Commit 633ba7876b96ec339ef685357e2f7c60b5a8ce85 introduces autoclear to support double buffer in dma mode 0, so remove clearing RXPKTRDY manually for dma mode 0. 3, Commit c7af6b29ffeffbeb28caf39e5b2ce29b11807c7d may break dma mode 1 for non-doublebuffer endpoint, fix it. With this patch, either usbtest #5 or g_file_storage(writing file to device in usb host) or g_ether have been tested OK in double buffer case(using fifo mode 3). Also, this patch has been verified that single buffer case can't be broken. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-01Linux 2.6.37-rc1v2.6.37-rc1Linus Torvalds
2010-11-01Merge branch 'for-linus' of git://www.jni.nu/crisLinus Torvalds
* 'for-linus' of git://www.jni.nu/cris: CRIS: Add paths for CRISv10 serial driver CRIS: Fix RS485 delay handling. Add missing "struct" to in sizeof.
2010-11-01Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi/pl022: fix erroneous platform data in U300 spi: fixed odd static string conventions in core code spi/bfin_spi: only request GPIO on first load spi/bfin_spi: handle error/status changes after data interrupts spi: enable spi_board_info to be registered after spi_master
2010-11-01CRIS: Add paths for CRISv10 serial driverJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-11-01spi/pl022: fix erroneous platform data in U300Linus Walleij
This fixes an erroneous use of LSB first in the U300 machine, the PL022 used in U300 is a standard ARM core that doesn't support this bit so it should never have been set. Cc: Kevin Wells <wellsk40@gmail.com>OA Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-31Input: ir-keytable - fix uninitialized variable warningDmitry Torokhov
We were forgetting to set up proper return value in success path causing ir_getkeycode() to fail intermittently: drivers/media/IR/ir-keytable.c: In function 'ir_getkeycode': drivers/media/IR/ir-keytable.c:363: warning: 'retval' may be used uninitialized in this function Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-31Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-i801: Add PCI idents for Patsburg 'IDF' SMBus controllers i2c-i801: Handle multiple instances instead of keeping global state i2c-i801: Add Intel Patsburg device ID i2c: Drop unused I2C_CLASS_TV flags
2010-10-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: appletouch - remove extra KERN_DEBUG use from dprintk Input: bu21013_ts - fix null dereference in error handling Input: ad7879 - prevent invalid finger data reports
2010-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (70 commits) [SCSI] pmcraid: add support for set timestamp command and other fixes [SCSI] pmcraid: remove duplicate struct member [SCSI] qla4xxx: Fix cmd check in qla4xxx_cmd_wait [SCSI] megaraid_sas: Version and documentation update [SCSI] megaraid_sas: Add three times Online controller reset [SCSI] megaraid_sas: Add input parameter for max_sectors [SCSI] megaraid_sas: support devices update flag [SCSI] libosd: write/read_sg_kern API [SCSI] libosd: Support for scatter gather write/read commands [SCSI] libosd: Free resources in reverse order of allocation [SCSI] libosd: Fix bug in attr_page handling [SCSI] lpfc 8.3.18: Update lpfc driver version to 8.3.18 [SCSI] lpfc 8.3.18: Add new WQE support [SCSI] lpfc 8.3.18: Fix critical errors [SCSI] lpfc 8.3.18: Adapter Shutdown and Unregistration cleanup [SCSI] lpfc 8.3.18: Add logic to detect last devloss timeout [SCSI] lpfc 8.3.18: Add support of received ELS commands [SCSI] lpfc 8.3.18: FC/FCoE Discovery fixes [SCSI] ipr: add definitions for a new adapter [SCSI] bfa: fix comments for c files ...
2010-10-31Merge branches 'irq-core-for-linus' and 'core-locking-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Fix up irq_node() for irq_data changes. genirq: Add single IRQ reservation helper genirq: Warn if enable_irq is called before irq is set up * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: semaphore: Remove mutex emulation staging: Final semaphore cleanup jbd2: Convert jbd2_slab_create_sem to mutex hpfs: Convert sbi->hpfs_creation_de to mutex Fix up trivial change/delete conflicts with deleted 'dream' drivers (drivers/staging/dream/camera/{mt9d112.c,mt9p012_fox.c,mt9t013.c,s5k3e2fx.c})
2010-10-31i2c-i801: Add PCI idents for Patsburg 'IDF' SMBus controllersDavid Woodhouse
These are the extra 'Integrated Device Function' SMBus controllers found on the Patsburg chipset. Mention the absence of slave mode support. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-31i2c-i801: Handle multiple instances instead of keeping global stateDavid Woodhouse
It's poor form to keep driver state in global variables rather than per-instance. It never really mattered in practice when there was only one controller on the chipset, but the latest chipsets do have more than one controller, so now we care. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-31i2c-i801: Add Intel Patsburg device IDSeth Heasley
Add support for the Intel Patsburg PCH SMBus Controller. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-31i2c: Drop unused I2C_CLASS_TV flagsJean Delvare
There are no users left for I2C_CLASS_TV_ANALOG and I2C_CLASS_TV_DIGITAL, so we can get rid of them. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-31Input: appletouch - remove extra KERN_DEBUG use from dprintkJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-31locks: remove fl_copy_lock lock_manager operationChristoph Hellwig
This one was only used for a nasty hack in nfsd, which has recently been removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-31locks: let the caller free file_lock on ->setlease failureChristoph Hellwig
The caller allocated it, the caller should free it. The only issue so far is that we could change the flp pointer even on an error return if the fl_change callback failed. But we can simply move the flp assignment after the fl_change invocation, as the callers don't care about the flp return value if the setlease call failed. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-31initramfs: Fix initramfs size for 32-bit archesGeert Uytterhoeven
Commit ffe8018c3424 ("initramfs: fix initramfs size calculation") broke 32-bit big-endian arches like (on ARAnyM): VFS: Cannot open root device "hda1" or unknown-block(3,1) Please append a correct "root=" boot option; here are the available partitions: fe80 1059408 nfhd8 (driver?) fe81 921600 nfhd8p1 00000000-0000-0000-0000-000000000nfhd8p1 fe82 137807 nfhd8p2 00000000-0000-0000-0000-000000000nfhd8p2 0200 3280 fd0 (driver?) 0201 3280 fd1 (driver?) 0300 1059408 hda driver: ide-gd 0301 921600 hda1 00000000-0000-0000-0000-000000000hda1 0302 137807 hda2 00000000-0000-0000-0000-000000000hda2 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1) As pointed out by Kerstin Jonsson <kerstin.jonsson@ericsson.com>, this is due to CONFIG_32BIT not being defined, so the initramfs size field is done as a 64-bit quad. On little-endian (like x86) this doesn matter, but on a big-endian machine the 32-bit reads will see the (zero) high bits. Only mips, s390, and score set CONFIG_32BIT for 32-bit builds, so fix it for all other 32-bit arches by inverting the logic and testing for CONFIG_64BIT, which should be defined on all 64-bit arches. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> [ I think we should just make it "u64" on all architectures and get rid of the whole #ifdef CONFIG_xxBIT - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: isdn: mISDN: socket: fix information leak to userland netdev: can: Change mail address of Hans J. Koch pcnet_cs: add new_id net: Truncate recvfrom and sendto length to INT_MAX. RDS: Let rds_message_alloc_sgs() return NULL RDS: Copy rds_iovecs into kernel memory instead of rereading from userspace RDS: Clean up error handling in rds_cmsg_rdma_args RDS: Return -EINVAL if rds_rdma_pages returns an error net: fix rds_iovec page count overflow can: pch_can: fix section mismatch warning by using a whitelisted name can: pch_can: fix sparse warning netxen_nic: Fix the tx queue manipulation bug in netxen_nic_probe ip_gre: fix fallback tunnel setup vmxnet: trivial annotation of protocol constant vmxnet3: remove unnecessary byteswapping in BAR writing macros ipv6/udp: report SndbufErrors and RcvbufErrors phy/marvell: rename 88ec048 to 88e1318s and fix mscr1 addr
2010-10-30nfsd4: initialize delegation pointer to leaseJ. Bruce Fields
The NFSv4 server was initializing the dp->dl_flock pointer by the somewhat ridiculous method of a locks_copy_lock callback. Now that setlease uses the passed-in lock instead of doing a copy, dl_flock no longer gets set, resulting in the lock leaking on delegation release, and later possible hangs (among other problems). So, initialize dl_flock and get rid of the callback. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-30locks: fix setlease methods to free passed-in lockJ. Bruce Fields
We modified setlease to require the caller to allocate the new lease in the case of creating a new lease, but forgot to fix up the filesystem methods. Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-30locks: fix leaks on setlease errorsJ. Bruce Fields
We're depending on setlease to free the passed-in lease on failure. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-30locks: prevent ENOMEM on lease unlockJ. Bruce Fields
Removing a lock shouldn't require any allocations; a failure due to ENOMEM leaves the caller with a choice between retrying or giving up and leaking an unused lease. Next we should split the other lease calls into add and delete cases. I wanted to start with just the bugfix. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-30drivers/media/IR/ir-keytable.c: fix binary searchDavid Härdeman
The input-large-scancode patches changed the binary search in drivers/media/IR/ir-keytable.c to use unsigned integers, but signed integers are actually necessary for the algorithm to work. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-30isdn: mISDN: socket: fix information leak to userlandKulikov Vasiliy
Structure mISDN_devinfo is copied to userland with the field "name" that has the last elements unitialized. It leads to leaking of contents of kernel stack memory. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30netdev: can: Change mail address of Hans J. KochHans J. Koch
My old mail address doesn't exist anymore. This changes all occurrences to my new address. Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30pcnet_cs: add new_idKen Kawasaki
pcnet_cs: add new_id: "corega Ether CF-TD" 10Base-T PCMCIA card. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30net: Truncate recvfrom and sendto length to INT_MAX.Linus Torvalds
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30RDS: Let rds_message_alloc_sgs() return NULLAndy Grover
Even with the previous fix, we still are reading the iovecs once to determine SGs needed, and then again later on. Preallocating space for sg lists as part of rds_message seemed like a good idea but it might be better to not do this. While working to redo that code, this patch attempts to protect against userspace rewriting the rds_iovec array between the first and second accesses. The consequences of this would be either a too-small or too-large sg list array. Too large is not an issue. This patch changes all callers of message_alloc_sgs to handle running out of preallocated sgs, and fail gracefully. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30RDS: Copy rds_iovecs into kernel memory instead of rereading from userspaceAndy Grover
Change rds_rdma_pages to take a passed-in rds_iovec array instead of doing copy_from_user itself. Change rds_cmsg_rdma_args to copy rds_iovec array once only. This eliminates the possibility of userspace changing it after our sanity checks. Implement stack-based storage for small numbers of iovecs, based on net/socket.c, to save an alloc in the extremely common case. Although this patch reduces iovec copies in cmsg_rdma_args to 1, we still do another one in rds_rdma_extra_size. Getting rid of that one will be trickier, so it'll be a separate patch. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30RDS: Clean up error handling in rds_cmsg_rdma_argsAndy Grover
We don't need to set ret = 0 at the end -- it's initialized to 0. Also, don't increment s_send_rdma stat if we're exiting with an error. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30RDS: Return -EINVAL if rds_rdma_pages returns an errorAndy Grover
rds_cmsg_rdma_args would still return success even if rds_rdma_pages returned an error (or overflowed). Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30net: fix rds_iovec page count overflowLinus Torvalds
As reported by Thomas Pollet, the rdma page counting can overflow. We get the rdma sizes in 64-bit unsigned entities, but then limit it to UINT_MAX bytes and shift them down to pages (so with a possible "+1" for an unaligned address). So each individual page count fits comfortably in an 'unsigned int' (not even close to overflowing into signed), but as they are added up, they might end up resulting in a signed return value. Which would be wrong. Catch the case of tot_pages turning negative, and return the appropriate error code. Reported-by: Thomas Pollet <thomas.pollet@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30can: pch_can: fix section mismatch warning by using a whitelisted nameMarc Kleine-Budde
This patch fixes the following section mismatch warning: WARNING: drivers/net/can/pch_can.o(.data+0x18): Section mismatch in reference from the variable pch_can_pcidev to the variable .devinit.rodata:pch_pci_tbl The variable pch_can_pcidev references the variable __devinitconst pch_pci_tbl This is actually a false positive which is fixed by giving the offending variable a whitelisted name, it's renamed to "pch_can_pci_driver". This makes sense because the variable is of the type "struct pci_driver". Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30can: pch_can: fix sparse warningMarc Kleine-Budde
This patch fixes the following sparse warning: drivers/net/can/pch_can.c:231:26: warning: incorrect type in argument 1 (different address spaces) drivers/net/can/pch_can.c:231:26: expected unsigned int [usertype] *addr drivers/net/can/pch_can.c:231:26: got unsigned int [noderef] <asn:2>*<noident> Let pch_can_bit_{set,clear} first parameter be a void __iomem pointer. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30netxen_nic: Fix the tx queue manipulation bug in netxen_nic_probeDenis Kirjanov
We should not stop the egress queue during probe because it is wrong. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30ip_gre: fix fallback tunnel setupEric Dumazet
Before making the fallback tunnel visible to lookups, we should make sure it is completely setup, once ipgre_tunnel_init() had been called and tstats per_cpu pointer allocated. move rcu_assign_pointer(ign->tunnels_wc[0], tunnel); from ipgre_fb_tunnel_init() to ipgre_init_net() Based on a patch from Pavel Emelyanov Reported-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-09 05:32:50 +0000