summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-04Linux 3.2.22v3.2.22Ben Hutchings
2012-07-04batman-adv: only drop packets of known wifi clientsMarek Lindner
commit 5870adc68fc39d81089f1e80efdf64b97e5c37a1 upstream. bug introduced with 59b699cdee039d75915c354da06937102d1f9a84 If the source or destination mac address of an ethernet packet could not be found in the translation table the packet was dropped if AP isolation was turned on. This behavior would make it impossible to send broadcast packets over the mesh as the broadcast address will never enter the translation table. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04acpi_pad: fix power_saving thread deadlockStuart Hayes
commit 5f1601261050251a5ca293378b492a69d590dacb upstream. The acpi_pad driver can get stuck in destroy_power_saving_task() waiting for kthread_stop() to stop a power_saving thread. The problem is that the isolated_cpus_lock mutex is owned when destroy_power_saving_task() calls kthread_stop(), which waits for a power_saving thread to end, and the power_saving thread tries to acquire the isolated_cpus_lock when it calls round_robin_cpu(). This patch fixes the issue by making round_robin_cpu() use its own mutex. https://bugzilla.kernel.org/show_bug.cgi?id=42981 Signed-off-by: Stuart Hayes <Stuart_Hayes@Dell.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04can: flexcan: use be32_to_cpup to handle the value of dt entryHui Wang
commit 85f2f834e85517307f13e30e630a5fc86f757cb5 upstream. The freescale arm i.MX series platform can support this driver, and usually the arm cpu works in the little endian mode by default, while device tree entry value is stored in big endian format, we should use be32_to_cpup() to handle them, after modification, it can work well both on the le cpu and be cpu. Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04xen/netfront: teardown the device before unregistering it.Ian Campbell
commit 6bc96d047fe32d76ef79f3195c52a542edf7c705 upstream. Fixes: [ 15.470311] WARNING: at /local/scratch/ianc/devel/kernels/linux/fs/sysfs/file.c:498 sysfs_attr_ns+0x95/0xa0() [ 15.470326] sysfs: kobject eth0 without dirent [ 15.470333] Modules linked in: [ 15.470342] Pid: 12, comm: xenwatch Not tainted 3.4.0-x86_32p-xenU #93 and [ 9.150554] BUG: unable to handle kernel paging request at 2b359000 [ 9.150577] IP: [<c1279561>] linkwatch_do_dev+0x81/0xc0 [ 9.150592] *pdpt = 000000002c3c9027 *pde = 0000000000000000 [ 9.150604] Oops: 0002 [#1] SMP [ 9.150613] Modules linked in: This is http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675190 Reported-by: George Shuklin <george.shuklin@gmail.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Tested-by: William Dauchy <wdauchy@gmail.com> Cc: 675190@bugs.debian.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04USB: CP210x Add 10 Device IDsCraig Shelley
commit 3fcc8f96829776cf181918461923d1e3bbb831a2 upstream. This patch adds 10 device IDs for CP210x based devices from the following manufacturers: Timewave Clipsal Festo Link Instruments Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04USB: option: Add USB ID for Novatel Ovation MC551Forest Bond
commit 065b07e7a14676f4138ce4619d229c0be5a74230 upstream. This device is also known as the Verizon USB551L. Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04ALSA: hda - Add Realtek ALC280 codec supportDavid Henningsson
commit befae82e2906cb7155020876a531b0b8c6c8d8c8 upstream. This chip looks very similar to ALC269 and ALC27* variants. The bug reporter has verified that sound was working after this patch had been applied. BugLink: https://bugs.launchpad.net/bugs/1017017 Tested-by: Richard Crossley <richardcrossley@o2.co.uk> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04stable: Allow merging of backports for serious user-visible performance issuesMel Gorman
commit eb3979f64d25120d60b9e761a4c58f70b1a02f86 upstream. Distribution kernel maintainers routinely backport fixes for users that were deemed important but not "something critical" as defined by the rules. To users of these kernels they are very serious and failing to fix them reduces the value of -stable. The problem is that the patches fixing these issues are often subtle and prone to regressions in other ways and need greater care and attention. To combat this, these "serious" backports should have a higher barrier to entry. This patch relaxes the rules to allow a distribution maintainer to merge to -stable a backported patch or small series that fixes a "serious" user-visible performance issue. They should include additional information on the user-visible bug affected and a link to the bugzilla entry if available. The same rules about the patch being already in mainline still apply. Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04x86, cpufeature: Rename X86_FEATURE_DTS to X86_FEATURE_DTHERMH. Peter Anvin
commit 4ad33411308596f2f918603509729922a1ec4411 upstream. It makes sense to label "Digital Thermal Sensor" as "DTS", but unfortunately the string "dts" was already used for "Debug Store", and /proc/cpuinfo is a user space ABI. Therefore, rename this to "dtherm". This conflict went into mainline via the hwmon tree without any x86 maintainer ack, and without any kind of hint in the subject. a4659053 x86/hwmon: fix initialization of coretemp Reported-by: Jean Delvare <khali@linux-fr.org> Link: http://lkml.kernel.org/r/4FE34BCB.5050305@linux.intel.com Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> [bwh: Backported to 3.2: drop the coretemp device table change] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04PM / Sleep: Prevent waiting forever on asynchronous suspend after abortMandeep Singh Baines
commit 1f758b23177d588a71b96ad02990e715949bb82f upstream. __device_suspend() must always send a completion. Otherwise, parent devices will wait forever. Commit 1e2ef05b, "PM: Limit race conditions between runtime PM and system sleep (v2)", introduced a regression by short-circuiting the complete_all() for certain error cases. This patch fixes the bug by always signalling a completion. Addresses http://crosbug.com/31972 Tested by injecting an abort. Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04drm/i915: Fix eDP blank screen after S3 resume on HP desktopsTakashi Iwai
commit 6db65cbb941f9d433659bdad02b307f6d94465df upstream. This patch fixes the problem on some HP desktop machines with eDP which give blank screens after S3 resume. It turned out that BLC_PWM_CPU_CTL must be written after BLC_PWM_CPU_CTL2. Otherwise it doesn't take effect on these SNB machines. Tested with 3.5-rc3 kernel. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49233 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04drm/i915: rip out the PM_IIR WARNDaniel Vetter
commit 58bf8062d0b293b8e1028e5b0342082002886bd4 upstream. After banging my head against this for the past few months, I still don't see how this could possible race under the premise that once an irq bit is masked in PM_IMR and reset in PM_IIR it won't show up again until we unmask it in PM_IMR. Still, we have reports of this being seen in the wild. Now Bspec has this little bit of lovely language in the PMIIR register: Public SNB Docs, Vol3Part2, 2.5.14 "PMIIR": "For each bit, the IIR can store a second pending interrupt if two or more of the same interrupt conditions occur before the first condition is cleared. Upon clearing the interrupt, the IIR bit will momentarily go low, then return high to indicate there is another interrupt pending." Now if we presume that PMIMR only prevent new interrupts from being queued, we could easily end up masking an interrupt and clearing it, but the 2nd pending interrupt setting the bit in PMIIR right away again. Which leads, the next time the irq handler runs, to hitting the WARN. Also, no bad side effects of this have ever been reported. And we've tracked down our issues with the gpu turbo getting stuck to bogus interrupt generation limits in th RPLIMIT register. So let's just rip out this WARN as bogus and call it a day. The only shallow thing here is that this 2-deep irq queue in the hw makes you wonder how racy the windows irq handler is ... Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42907 Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04drm/i915: Refactor the deferred PM_IIR handling into a single functionChris Wilson
commit fc6826d1dcd65f3d1e9a5377678882e4e08f02be upstream. This function, along with the registers and deferred work hander, are all shared with SandyBridge, IvyBridge and their variants. So remove the duplicate code into a single function. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [bwh: Backported to 3.2: adjust context; drop changes for Valley View] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04oprofile: perf: use NR_CPUS instead or nr_cpumask_bits for static arrayWill Deacon
commit e734568b675c985db2026848fefaac01c22977a5 upstream. The OProfile perf backend uses a static array to keep track of the perf events on the system. When compiling with CONFIG_CPUMASK_OFFSTACK=y && SMP, nr_cpumask_bits is not a compile-time constant and the build will fail with: oprofile_perf.c:28: error: variably modified 'perf_events' at file scope This patch uses NR_CPUs instead of nr_cpumask_bits for the array initialisation. If this causes space problems in the future, we can always move to dynamic allocation for the events array. Cc: Matt Fleming <matt@console-pimps.org> Reported-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04USB: option: add id for Cellient MEN-200Dmitry Shmygov
commit 1e2c4e59d2b8797973471b4a287a43eac12a0f40 upstream. Add vendor and product ID to option.c driver for Cellient MEN-200 EVDO Rev.B 450MHz data module. http://cellient.com Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04ARM: SAMSUNG: Fix for S3C2412 EBI memory mappingJose Miguel Goncalves
commit 3dca938656c7b0ff6b0717a5dde0f5f45e592be5 upstream. While upgrading the kernel on a S3C2412 based board I've noted that it was impossible to boot the board with a 2.6.32 or upper kernel. I've tracked down the problem to the EBI virtual memory mapping that is in conflict with the IO mapping definition in arch/arm/mach-s3c24xx/s3c2412.c. Signed-off-by: Jose Miguel Goncalves <jose.goncalves@inov.pt> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04iwlwifi: remove log_event debugfs file debugging is disabledJohannes Berg
commit 882b7b7d11d65e8eccce738f1ce97cdfdb998f9f upstream. When debugging is disabled, the event log functions aren't functional in the way that the debugfs file expects. This leads to the debugfs access crashing. Since the event log functions aren't functional then, remove the debugfs file when CONFIG_IWLWIFI_DEBUG is not set. Reported-by: Lekensteyn <lekensteyn@gmail.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: adjust filename, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04ath9k_hw: avoid possible infinite loop in ar9003_get_pll_sqsum_dvcMohammed Shafi Shajakhan
commit f18e3c6b67f448ec47b3a5b242789bd3d5644879 upstream. "ath9k: Fix softlockup in AR9485" with commit id 64bc1239c790e051ff677e023435d770d2ffa174 fixed the reported issue, yet its better to avoid the possible infinite loop in ar9003_get_pll_sqsum_dvc by having a timeout as suggested by ath9k maintainers. http://www.spinics.net/lists/linux-wireless/msg92126.html. Based on my testing PLL's locking measurement is done in ~200us (2 iterations). Cc: Rolf Offermanns <rolf.offermanns@gmx.net> Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULLJonghwan Choi
commit a5d8f4765f0e92ef027492a8cb979c5b8d45f2c3 upstream. On the error condition clk_get() returns ERR_PTR(). Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04batman-adv: fix skb->data assignmentAntonio Quartulli
commit 2c995ff892313009e336ecc8ec3411022f5b1c39 upstream. skb_linearize(skb) possibly rearranges the skb internal data and then changes the skb->data pointer value. For this reason any other pointer in the code that was assigned skb->data before invoking skb_linearise(skb) must be re-assigned. In the current tt_query message handling code this is not done and therefore, in case of skb linearization, the pointer used to handle the packet header ends up in pointing to free'd memory. This bug was introduced by a73105b8d4c765d9ebfb664d0a66802127d8e4c7 (batman-adv: improved client announcement mechanism) Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: David S. Miller <davem@davemloft.net> [This patch is a backport for kernel versions 3.1 and 3.2 - Antonio] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04ath9k: fix a tx rate duration calculation bugFelix Fietkau
commit 76591bea9714a58d8924154068c78d702eb2cb17 upstream. The rate pointer variable for a rate series is used in a loop before it is initialized. This went unnoticed because it was used earlier for the RTS/CTS rate. This bug can lead to the wrong PHY type being passed to the duration calculation function. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04can: c_can: precedence error in c_can_chip_config()Dan Carpenter
commit d9cb9bd63eb27ac19f26a8547128c053f43a5da8 upstream. (CAN_CTRLMODE_LISTENONLY & CAN_CTRLMODE_LOOPBACK) is (0x02 & 0x01) which is zero so the condition is never true. The intent here was to test that both flags were set. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04ath9k: Fix softlockup in AR9485Mohammed Shafi Shajakhan
commit bcb7ad7bcbef030e6ba71ede1f9866368aca7c99 upstream. steps to recreate: load latest ath9k driver with AR9485 stop the network-manager and wpa_supplicant bring the interface up Call Trace: [<ffffffffa0517490>] ? ath_hw_check+0xe0/0xe0 [ath9k] [<ffffffff812cd1e8>] __const_udelay+0x28/0x30 [<ffffffffa03bae7a>] ar9003_get_pll_sqsum_dvc+0x4a/0x80 [ath9k_hw] [<ffffffffa05174eb>] ath_hw_pll_work+0x5b/0xe0 [ath9k] [<ffffffff810744fe>] process_one_work+0x11e/0x470 [<ffffffff8107530f>] worker_thread+0x15f/0x360 [<ffffffff810751b0>] ? manage_workers+0x230/0x230 [<ffffffff81079af3>] kthread+0x93/0xa0 [<ffffffff815fd3a4>] kernel_thread_helper+0x4/0x10 [<ffffffff81079a60>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff815fd3a0>] ? gs_change+0x13/0x13 ensure that the PLL-WAR for AR9485/AR9340 is executed only if the STA is associated (or) IBSS/AP mode had started beaconing. Ideally this WAR is needed to recover from some rare beacon stuck during stress testing. Before the STA is associated/IBSS had started beaconing, PLL4(0x1618c) always seem to have zero even though we had configured PLL3(0x16188) to query about PLL's locking status. When we keep on polling infinitely PLL4's 8th bit(ie check for PLL locking measurements is done), machine hangs due to softlockup. fixes https://bugzilla.redhat.com/show_bug.cgi?id=811142 Reported-by: Rolf Offermanns <rolf.offermanns@gmx.net> Tested-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04cfg80211: fix potential deadlock in regulatoryEliad Peller
commit fe20b39ec32e975f1054c0b7866c873a954adf05 upstream. reg_timeout_work() calls restore_regulatory_settings() which takes cfg80211_mutex. reg_set_request_processed() already holds cfg80211_mutex before calling cancel_delayed_work_sync(reg_timeout), so it might deadlock. Call the async cancel_delayed_work instead, in order to avoid the potential deadlock. This is the relevant lockdep warning: cfg80211: Calling CRDA for country: XX ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.0-rc5-wl+ #26 Not tainted ------------------------------------------------------- kworker/0:2/1391 is trying to acquire lock: (cfg80211_mutex){+.+.+.}, at: [<bf28ae00>] restore_regulatory_settings+0x34/0x418 [cfg80211] but task is already holding lock: ((reg_timeout).work){+.+...}, at: [<c0059e94>] process_one_work+0x1f0/0x480 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((reg_timeout).work){+.+...}: [<c008fd44>] validate_chain+0xb94/0x10f0 [<c0090b68>] __lock_acquire+0x8c8/0x9b0 [<c0090d40>] lock_acquire+0xf0/0x114 [<c005b600>] wait_on_work+0x4c/0x154 [<c005c000>] __cancel_work_timer+0xd4/0x11c [<c005c064>] cancel_delayed_work_sync+0x1c/0x20 [<bf28b274>] reg_set_request_processed+0x50/0x78 [cfg80211] [<bf28bd84>] set_regdom+0x550/0x600 [cfg80211] [<bf294cd8>] nl80211_set_reg+0x218/0x258 [cfg80211] [<c03c7738>] genl_rcv_msg+0x1a8/0x1e8 [<c03c6a00>] netlink_rcv_skb+0x5c/0xc0 [<c03c7584>] genl_rcv+0x28/0x34 [<c03c6720>] netlink_unicast+0x15c/0x228 [<c03c6c7c>] netlink_sendmsg+0x218/0x298 [<c03933c8>] sock_sendmsg+0xa4/0xc0 [<c039406c>] __sys_sendmsg+0x1e4/0x268 [<c0394228>] sys_sendmsg+0x4c/0x70 [<c0013840>] ret_fast_syscall+0x0/0x3c -> #1 (reg_mutex){+.+.+.}: [<c008fd44>] validate_chain+0xb94/0x10f0 [<c0090b68>] __lock_acquire+0x8c8/0x9b0 [<c0090d40>] lock_acquire+0xf0/0x114 [<c04734dc>] mutex_lock_nested+0x48/0x320 [<bf28b2cc>] reg_todo+0x30/0x538 [cfg80211] [<c0059f44>] process_one_work+0x2a0/0x480 [<c005a4b4>] worker_thread+0x1bc/0x2bc [<c0061148>] kthread+0x98/0xa4 [<c0014af4>] kernel_thread_exit+0x0/0x8 -> #0 (cfg80211_mutex){+.+.+.}: [<c008ed58>] print_circular_bug+0x68/0x2cc [<c008fb28>] validate_chain+0x978/0x10f0 [<c0090b68>] __lock_acquire+0x8c8/0x9b0 [<c0090d40>] lock_acquire+0xf0/0x114 [<c04734dc>] mutex_lock_nested+0x48/0x320 [<bf28ae00>] restore_regulatory_settings+0x34/0x418 [cfg80211] [<bf28b200>] reg_timeout_work+0x1c/0x20 [cfg80211] [<c0059f44>] process_one_work+0x2a0/0x480 [<c005a4b4>] worker_thread+0x1bc/0x2bc [<c0061148>] kthread+0x98/0xa4 [<c0014af4>] kernel_thread_exit+0x0/0x8 other info that might help us debug this: Chain exists of: cfg80211_mutex --> reg_mutex --> (reg_timeout).work Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((reg_timeout).work); lock(reg_mutex); lock((reg_timeout).work); lock(cfg80211_mutex); *** DEADLOCK *** 2 locks held by kworker/0:2/1391: #0: (events){.+.+.+}, at: [<c0059e94>] process_one_work+0x1f0/0x480 #1: ((reg_timeout).work){+.+...}, at: [<c0059e94>] process_one_work+0x1f0/0x480 stack backtrace: [<c001b928>] (unwind_backtrace+0x0/0x12c) from [<c0471d3c>] (dump_stack+0x20/0x24) [<c0471d3c>] (dump_stack+0x20/0x24) from [<c008ef70>] (print_circular_bug+0x280/0x2cc) [<c008ef70>] (print_circular_bug+0x280/0x2cc) from [<c008fb28>] (validate_chain+0x978/0x10f0) [<c008fb28>] (validate_chain+0x978/0x10f0) from [<c0090b68>] (__lock_acquire+0x8c8/0x9b0) [<c0090b68>] (__lock_acquire+0x8c8/0x9b0) from [<c0090d40>] (lock_acquire+0xf0/0x114) [<c0090d40>] (lock_acquire+0xf0/0x114) from [<c04734dc>] (mutex_lock_nested+0x48/0x320) [<c04734dc>] (mutex_lock_nested+0x48/0x320) from [<bf28ae00>] (restore_regulatory_settings+0x34/0x418 [cfg80211]) [<bf28ae00>] (restore_regulatory_settings+0x34/0x418 [cfg80211]) from [<bf28b200>] (reg_timeout_work+0x1c/0x20 [cfg80211]) [<bf28b200>] (reg_timeout_work+0x1c/0x20 [cfg80211]) from [<c0059f44>] (process_one_work+0x2a0/0x480) [<c0059f44>] (process_one_work+0x2a0/0x480) from [<c005a4b4>] (worker_thread+0x1bc/0x2bc) [<c005a4b4>] (worker_thread+0x1bc/0x2bc) from [<c0061148>] (kthread+0x98/0xa4) [<c0061148>] (kthread+0x98/0xa4) from [<c0014af4>] (kernel_thread_exit+0x0/0x8) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04ath9k: Fix a WARNING on suspend/resume with IBSSMohammed Shafi Shajakhan
commit 2031b4c2b4904f7448ab9e4bc6b9bf16e32709f5 upstream. this patch is dependent on the patch "cfg80211: fix interface combinations" In ath9k currently we have ADHOC interface as a single incompatible interface. when drv_add_interface is called during resume we got to consider number of vifs already present in addition to checking the drivers 'opmode' information about ADHOC. we incorrectly assume an ADHOC interface is already present. Then we may miss some driver specific data for the ADHOC interface after resume. The above mentioned checks can be removed from the driver, as the patch 'cfg80211: fix interface combinations' ensures that if an interface type is not advertised by the driver in any of the interface combinations(via ieee80211_iface_combination) then it shall be treated as a single incompatible interface. Fixes the following warning on suspend/resume with ibss interface. ath: phy0: Cannot create ADHOC interface when other interfaces already exist. WARNING: at net/mac80211/driver-ops.h:12 ieee80211_reconfig+0x1882/0x1ca0 [mac80211]() Hardware name: 2842RK1 wlan2: Failed check-sdata-in-driver check, flags: 0x0 Call Trace: [<c01361b2>] warn_slowpath_common+0x72/0xa0 [<f8aaa7c2>] ? ieee80211_reconfig+0x1882/0x1ca0 [mac80211] [<f8aaa7c2>] ? ieee80211_reconfig+0x1882/0x1ca0 [mac80211] [<c0136283>] warn_slowpath_fmt+0x33/0x40 [<f8aaa7c2>] ieee80211_reconfig+0x1882/0x1ca0 [mac80211] [<c06c1d1a>] ? mutex_lock_nested+0x23a/0x2f0 [<f8a95097>] ieee80211_resume+0x27/0x70 [mac80211] [<fd177edf>] wiphy_resume+0x8f/0xa0 [cfg80211] Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04dm thin: reinstate missing mempool_free in cell_release_singletonMike Snitzer
commit 03aaae7cdc71bc306888440b1f569d463e917b6d upstream. Fix a significant memory leak inadvertently introduced during simplification of cell_release_singleton() in commit 6f94a4c45a6f744383f9f695dde019998db3df55 ("dm thin: fix stacked bi_next usage"). A cell's hlist_del() must be accompanied by a mempool_free(). Use __cell_release() to do this, like before. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04drm/nouveau/fbcon: using nv_two_heads is not a good ideaBen Skeggs
commit 9bd0c15fcfb42f6245447c53347d65ad9e72080b upstream. nv_two_heads() was never meant to be used outside of pre-nv50 code. The code checks for >= NV_10 for 2 CRTCs, then downgrades a few specific chipsets to 1 CRTC based on (pci_device & 0x0ff0). The breakage example seen is on GTX 560Ti, with a pciid of 0x1200, which gets detected as an NV20 (0x020x) with 1 CRTC by nv_two_heads(), causing memory corruption because there's actually 2 CRTCs.. This switches fbcon to use the CRTC count directly from the mode_config structure, which will also fix the same issue on Kepler boards which have 4 CRTCs. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04drm/edid: don't return stack garbage from supports_rbDaniel Vetter
commit b196a4980ff7bb54db478e2a408dc8b12be15304 upstream. We need to initialize this to false, because the is_rb callback only ever sets it to true. Noticed while reading through the code. Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04smsusb: add autodetection support for USB ID 2040:f5a0Michael Krufky
commit 3e1141e2ce5667301a74ca2ef396d9bd5e995f7f upstream. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04gspca-core: Fix buffers staying in queued state after a stream_offHans de Goede
commit af05ef01e9cde84620c6855a8d8ab9c8a1db9009 upstream. This fixes a regression introduced by commit f7059ea and should be backported to all supported stable kernels which have this commit. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04staging:rts_pstor:Fix possible panic by NULL pointer dereferencewwang
commit 0d05568ac79bfc595f1eadc3e0fd7a20a45f7b69 upstream. rtsx_transport.c (rtsx_transfer_sglist_adma_partial): pointer struct scatterlist *sg, which is mapped in dma_map_sg, is used as an iterator in later transfer operation. It is corrupted and passed to dma_unmap_sg, thus causing fatal unmap of some erroneous address. Fix it by duplicating *sg_ptr for iterating. Signed-off-by: wwang <wei_wang@realsil.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04drm/i915: Do the fallback non-IRQ wait in ring throttle, too.Eric Anholt
commit 7ea29b13e5e3e1e61e612349eb0366efdb6457f3 upstream. As a workaround for IRQ synchronization issues in the gen7 BLT ring, we want to turn the two wait functions into polling loops. Signed-off-by: Eric Anholt <eric@anholt.net> Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Acked-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04e1000e: Remove special case for 82573/82574 ASPM L1 disablementChris Boot
commit 59aed95263bdd0e2b48eb9be5a94346d2d4abf90 upstream. For the 82573, ASPM L1 gets disabled wholesale so this special-case code is not required. For the 82574 the previous patch does the same as for the 82573, disabling L1 on the adapter. Thus, this code is no longer required and can be removed. Signed-off-by: Chris Boot <bootc@bootc.net> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04e1000e: Disable ASPM L1 on 82574Chris Boot
commit id d4a4206ebbaf48b55803a7eb34e330530d83a889 ASPM on the 82574 causes trouble. Currently the driver disables L0s for this NIC but only disables L1 if the MTU is >1500. This patch simply causes L1 to be disabled regardless of the MTU setting. Signed-off-by: Chris Boot <bootc@bootc.net> Cc: "Wyborny, Carolyn" <carolyn.wyborny@intel.com> Cc: Nix <nix@esperi.org.uk> Link: https://lkml.org/lkml/2012/3/19/362 Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> [Jeff Kirsher: Backport to 3.2-3.4 kernels] Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04drm/i915: Remove use of the autoreported ringbuffer HEAD positionChris Wilson
This is a revert of 6aa56062eaba67adfb247cded244fd877329588d. This was originally introduced to workaround reads of the ringbuffer registers returning 0 on SandyBridge causing hangs due to ringbuffer overflow. The root cause here was reads through the GT powerwell require the forcewake dance, something we only learnt of later. Now it appears that reading the reported head position from the HWS is returning garbage, leading once again to hangs. For example, on q35 the autoreported head reports: [ 217.975608] head now 00010000, actual 00010000 [ 436.725613] head now 00200000, actual 00200000 [ 462.956033] head now 00210000, actual 00210010 [ 485.501409] head now 00400000, actual 00400020 [ 508.064280] head now 00410000, actual 00410000 [ 530.576078] head now 00600000, actual 00600020 [ 553.273489] head now 00610000, actual 00610018 which appears reasonably sane. In contrast, if we look at snb: [ 141.970680] head now 00e10000, actual 00008238 [ 141.974062] head now 02734000, actual 000083c8 [ 141.974425] head now 00e10000, actual 00008488 [ 141.980374] head now 032b5000, actual 000088b8 [ 141.980885] head now 03271000, actual 00008950 [ 142.040628] head now 02101000, actual 00008b40 [ 142.180173] head now 02734000, actual 00009050 [ 142.181090] head now 00000000, actual 00000ae0 [ 142.183737] head now 02734000, actual 00009050 In addition, the automatic reporting of the head position is scheduled to be defeatured in the future. It has no more utility, remove it. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45492 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Eric Anholt <eric@anholt.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> (cherry picked from commit 5d031e5b633d910f35e6e0abce94d9d842390006) Signed-off-by: Timo Aaltonen <timo.aaltonen@canonical.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04drm/i915: Finish any pending operations on the framebuffer before disablingChris Wilson
Similar to the case where we are changing from one framebuffer to another, we need to be sure that there are no pending WAIT_FOR_EVENTs on the pipe for the current framebuffer before switching. If we disable the pipe, and then try to execute a WAIT_FOR_EVENT it will block indefinitely and cause a GPU hang. We attempted to fix this in commit 85345517fe6d4de27b0d6ca19fef9d28ac947c4a (drm/i915: Retire any pending operations on the old scanout when switching) for the case of mode switching, but this leaves the condition where we are switching off the pipe vulnerable. There still remains the race condition were a display may be unplugged, switched off by the core, a uevent sent to notify the DDX and the DDX may issue a WAIT_FOR_EVENT before it processes the uevent. This window does not exist if the pipe is only switched off in response to the uevent. Time to make sure that is so... Reported-by: Francis Leblanc <Francis.Leblanc-Lebeau@verint.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36515 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45413 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> [danvet: fixup spelling in comment, noticed by Eugeni.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit 14667a4bde4361b7ac420d68a2e9e9b9b2df5231) Signed-off-by: Timo Aaltonen <timo.aaltonen@canonical.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04nilfs2: ensure proper cache clearing for gc-inodesRyusuke Konishi
commit fbb24a3a915f105016f1c828476be11aceac8504 upstream. A gc-inode is a pseudo inode used to buffer the blocks to be moved by garbage collection. Block caches of gc-inodes must be cleared every time a garbage collection function (nilfs_clean_segments) completes. Otherwise, stale blocks buffered in the caches may be wrongly reused in successive calls of the GC function. For user files, this is not a problem because their gc-inodes are distinguished by a checkpoint number as well as an inode number. They never buffer different blocks if either an inode number, a checkpoint number, or a block offset differs. However, gc-inodes of sufile, cpfile and DAT file can store different data for the same block offset. Thus, the nilfs_clean_segments function can move incorrect block for these meta-data files if an old block is cached. I found this is really causing meta-data corruption in nilfs. This fixes the issue by ensuring cache clear of gc-inodes and resolves reported GC problems including checkpoint file corruption, b-tree corruption, and the following warning during GC. nilfs_palloc_freev: entry number 307234 already freed. ... Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04thp: avoid atomic64_read in pmd_read_atomic for 32bit PAEAndrea Arcangeli
commit e4eed03fd06578571c01d4f1478c874bb432c815 upstream. In the x86 32bit PAE CONFIG_TRANSPARENT_HUGEPAGE=y case while holding the mmap_sem for reading, cmpxchg8b cannot be used to read pmd contents under Xen. So instead of dealing only with "consistent" pmdvals in pmd_none_or_trans_huge_or_clear_bad() (which would be conceptually simpler) we let pmd_none_or_trans_huge_or_clear_bad() deal with pmdvals where the low 32bit and high 32bit could be inconsistent (to avoid having to use cmpxchg8b). The only guarantee we get from pmd_read_atomic is that if the low part of the pmd was found null, the high part will be null too (so the pmd will be considered unstable). And if the low part of the pmd is found "stable" later, then it means the whole pmd was read atomically (because after a pmd is stable, neither MADV_DONTNEED nor page faults can alter it anymore, and we read the high part after the low part). In the 32bit PAE x86 case, it is enough to read the low part of the pmdval atomically to declare the pmd as "stable" and that's true for THP and no THP, furthermore in the THP case we also have a barrier() that will prevent any inconsistent pmdvals to be cached by a later re-read of the *pmd. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Jonathan Nieder <jrnieder@gmail.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Tested-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04mm: pmd_read_atomic: fix 32bit PAE pmd walk vs pmd_populate SMP race conditionAndrea Arcangeli
commit 26c191788f18129af0eb32a358cdaea0c7479626 upstream. When holding the mmap_sem for reading, pmd_offset_map_lock should only run on a pmd_t that has been read atomically from the pmdp pointer, otherwise we may read only half of it leading to this crash. PID: 11679 TASK: f06e8000 CPU: 3 COMMAND: "do_race_2_panic" #0 [f06a9dd8] crash_kexec at c049b5ec #1 [f06a9e2c] oops_end at c083d1c2 #2 [f06a9e40] no_context at c0433ded #3 [f06a9e64] bad_area_nosemaphore at c043401a #4 [f06a9e6c] __do_page_fault at c0434493 #5 [f06a9eec] do_page_fault at c083eb45 #6 [f06a9f04] error_code (via page_fault) at c083c5d5 EAX: 01fb470c EBX: fff35000 ECX: 00000003 EDX: 00000100 EBP: 00000000 DS: 007b ESI: 9e201000 ES: 007b EDI: 01fb4700 GS: 00e0 CS: 0060 EIP: c083bc14 ERR: ffffffff EFLAGS: 00010246 #7 [f06a9f38] _spin_lock at c083bc14 #8 [f06a9f44] sys_mincore at c0507b7d #9 [f06a9fb0] system_call at c083becd start len EAX: ffffffda EBX: 9e200000 ECX: 00001000 EDX: 6228537f DS: 007b ESI: 00000000 ES: 007b EDI: 003d0f00 SS: 007b ESP: 62285354 EBP: 62285388 GS: 0033 CS: 0073 EIP: 00291416 ERR: 000000da EFLAGS: 00000286 This should be a longstanding bug affecting x86 32bit PAE without THP. Only archs with 64bit large pmd_t and 32bit unsigned long should be affected. With THP enabled the barrier() in pmd_none_or_trans_huge_or_clear_bad() would partly hide the bug when the pmd transition from none to stable, by forcing a re-read of the *pmd in pmd_offset_map_lock, but when THP is enabled a new set of problem arises by the fact could then transition freely in any of the none, pmd_trans_huge or pmd_trans_stable states. So making the barrier in pmd_none_or_trans_huge_or_clear_bad() unconditional isn't good idea and it would be a flakey solution. This should be fully fixed by introducing a pmd_read_atomic that reads the pmd in order with THP disabled, or by reading the pmd atomically with cmpxchg8b with THP enabled. Luckily this new race condition only triggers in the places that must already be covered by pmd_none_or_trans_huge_or_clear_bad() so the fix is localized there but this bug is not related to THP. NOTE: this can trigger on x86 32bit systems with PAE enabled with more than 4G of ram, otherwise the high part of the pmd will never risk to be truncated because it would be zero at all times, in turn so hiding the SMP race. This bug was discovered and fully debugged by Ulrich, quote: ---- [..] pmd_none_or_trans_huge_or_clear_bad() loads the content of edx and eax. 496 static inline int pmd_none_or_trans_huge_or_clear_bad(pmd_t *pmd) 497 { 498 /* depend on compiler for an atomic pmd read */ 499 pmd_t pmdval = *pmd; // edi = pmd pointer 0xc0507a74 <sys_mincore+548>: mov 0x8(%esp),%edi ... // edx = PTE page table high address 0xc0507a84 <sys_mincore+564>: mov 0x4(%edi),%edx ... // eax = PTE page table low address 0xc0507a8e <sys_mincore+574>: mov (%edi),%eax [..] Please note that the PMD is not read atomically. These are two "mov" instructions where the high order bits of the PMD entry are fetched first. Hence, the above machine code is prone to the following race. - The PMD entry {high|low} is 0x0000000000000000. The "mov" at 0xc0507a84 loads 0x00000000 into edx. - A page fault (on another CPU) sneaks in between the two "mov" instructions and instantiates the PMD. - The PMD entry {high|low} is now 0x00000003fda38067. The "mov" at 0xc0507a8e loads 0xfda38067 into eax. ---- Reported-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04hwmon: (applesmc) Limit key length in warning messagesHenrik Rydberg
commit ac852edb47b15900886ba2564eeeb13b3b526e3e upstream. Key lookups may call read_smc() with a fixed-length key string, and if the lookup fails, trailing stack content may appear in the kernel log. Fixed with this patch. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04staging: r8712u: Add new USB IDsLubomir Schmidt
commit 3026b0e942c65c65c8fc80d391d004228b52b916 upstream. There are two new devices for this driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04hwrng: atmel-rng - fix data valid checkPeter Korsgaard
commit c475c06f4bb689d6ad87d7512e036d6dface3160 upstream. Brown paper bag: Data valid is LSB of the ISR (status register), and NOT of ODATA (current random data word)! With this, rngtest is a lot happier. Before: rngtest 3 Copyright (c) 2004 by Henrique de Moraes Holschuh This is free software; see the source for copying conditions. There is NO warr. rngtest: starting FIPS tests... rngtest: bits received from input: 20000032 rngtest: FIPS 140-2 successes: 3 rngtest: FIPS 140-2 failures: 997 rngtest: FIPS 140-2(2001-10-10) Monobit: 604 rngtest: FIPS 140-2(2001-10-10) Poker: 996 rngtest: FIPS 140-2(2001-10-10) Runs: 36 rngtest: FIPS 140-2(2001-10-10) Long run: 0 rngtest: FIPS 140-2(2001-10-10) Continuous run: 117 rngtest: input channel speed: (min=622.371; avg=23682.481; max=28224.350)Kibitss rngtest: FIPS tests speed: (min=12.361; avg=12.718; max=12.861)Mibits/s rngtest: Program run time: 2331696 microsecondsx After: rngtest 3 Copyright (c) 2004 by Henrique de Moraes Holschuh This is free software; see the source for copying conditions. There is NO warr. rngtest: starting FIPS tests... rngtest: bits received from input: 20000032 rngtest: FIPS 140-2 successes: 999 rngtest: FIPS 140-2 failures: 1 rngtest: FIPS 140-2(2001-10-10) Monobit: 0 rngtest: FIPS 140-2(2001-10-10) Poker: 0 rngtest: FIPS 140-2(2001-10-10) Runs: 1 rngtest: FIPS 140-2(2001-10-10) Long run: 0 rngtest: FIPS 140-2(2001-10-10) Continuous run: 0 rngtest: input channel speed: (min=777.363; avg=43588.270; max=47870.711)Kibitss rngtest: FIPS tests speed: (min=11.943; avg=12.716; max=12.844)Mibits/s rngtest: Program run time: 1955282 microseconds Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Reported-by: George Pontis <GPontis@z9.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04edac: avoid mce decoding crash after edac driver unloadedChen Gong
commit e35fca4791fcdd43dc1fd769797df40c562ab491 upstream. Some edac drivers register themselves as mce decoders via notifier_chain. But in current notifier_chain implementation logic, it doesn't accept same notifier registered twice. If so, it will be wrong when adding/removing the element from the list. For example, on one SandyBridge platform, remove module sb_edac and then trigger one error, it will hit oops because it has no mce decoder registered but related notifier_chain still points to an invalid callback function. Here is an example: Call Trace: [<ffffffff8150ef6a>] atomic_notifier_call_chain+0x1a/0x20 [<ffffffff8102b936>] mce_log+0x46/0x180 [<ffffffff8102eaea>] apei_mce_report_mem_error+0x4a/0x60 [<ffffffff812e19d2>] ghes_do_proc+0x192/0x210 [<ffffffff812e2066>] ghes_proc+0x46/0x70 [<ffffffff812e20d8>] ghes_notify_sci+0x48/0x80 [<ffffffff8150ef05>] notifier_call_chain+0x55/0x80 [<ffffffff81076f1a>] __blocking_notifier_call_chain+0x5a/0x80 [<ffffffff812aea11>] ? acpi_os_wait_events_complete+0x23/0x23 [<ffffffff81076f56>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff812ddc4d>] acpi_hed_notify+0x19/0x1b [<ffffffff812b16bd>] acpi_device_notify+0x19/0x1b [<ffffffff812beb38>] acpi_ev_notify_dispatch+0x67/0x7f [<ffffffff812aea3a>] acpi_os_execute_deferred+0x29/0x36 [<ffffffff81069dc2>] process_one_work+0x132/0x450 [<ffffffff8106bbcb>] worker_thread+0x17b/0x3c0 [<ffffffff8106ba50>] ? manage_workers+0x120/0x120 [<ffffffff81070aee>] kthread+0x9e/0xb0 [<ffffffff81514724>] kernel_thread_helper+0x4/0x10 [<ffffffff81070a50>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff81514720>] ? gs_change+0x13/0x13 Code: f3 49 89 d4 45 85 ed 4d 89 c6 48 8b 0f 74 48 48 85 c9 75 17 eb 41 0f 1f 80 00 00 00 00 41 83 ed 01 4c 89 f9 74 22 4d 85 ff 74 1d <4c> 8b 79 08 4c 89 e2 48 89 de 48 89 cf ff 11 4d 85 f6 74 04 41 RIP [<ffffffff8150eef6>] notifier_call_chain+0x46/0x80 RSP <ffff88042868fb20> CR2: ffffffffa01af838 ---[ end trace 0100930068e73e6f ]--- BUG: unable to handle kernel paging request at fffffffffffffff8 IP: [<ffffffff810705b0>] kthread_data+0x10/0x20 PGD 1a0d067 PUD 1a0e067 PMD 0 Oops: 0000 [#2] SMP Only i7core_edac and sb_edac have such issues because they have more than one memory controller which means they have to register mce decoder many times. Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> [bwh: Backported to 3.2: drivers call atomic_notifier_chain_{,un}register() directly] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04Tools: hv: verify origin of netlink connector messageOlaf Hering
commit bcc2c9c3fff859e0eb019fe6fec26f9b8eba795c upstream. The SuSE security team suggested to use recvfrom instead of recv to be certain that the connector message is originated from kernel. CVE-2012-2669 Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Marcus Meissner <meissner@suse.de> Signed-off-by: Sebastian Krahmer <krahmer@suse.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04staging:iio:ad7606: Re-add missing scale attributeLars-Peter Clausen
commit 279bf2e57c30c9a4482b2b6ede11b31c41e35e78 upstream. Commit 50ac23be ("staging:iio:adc:ad7606 add local define for chan_spec structures.") accidentally removed the scale info_mask flag. This patch adds it back again. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: - info_mask was completely gone rather than set to another flag - IIO_CHAN_INFO_SCALE_SHARED_BIT was not defined; write it out as a shift] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19Linux 3.2.21v3.2.21Ben Hutchings
2012-06-19drm/radeon: add some additional 6xx/7xx/EG register initAlex Deucher
commit b866d1334ba2d544bc575d75357dea6bdcdc7f46 upstream. - SMX_SAR_CTL0 needs to be programmed correctly to prevent problems with memory exports in certain cases. - VC_ENHANCE needs to be initialized on 6xx/7xx. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19swap: fix shmem swapping when more than 8 areasHugh Dickins
commit 9b15b817f3d62409290fd56fe3cbb076a931bb0a upstream. Minchan Kim reports that when a system has many swap areas, and tmpfs swaps out to the ninth or more, shmem_getpage_gfp()'s attempts to read back the page cannot locate it, and the read fails with -ENOMEM. Whoops. Yes, I blindly followed read_swap_header()'s pte_to_swp_entry( swp_entry_to_pte()) technique for determining maximum usable swap offset, without stopping to realize that that actually depends upon the pte swap encoding shifting swap offset to the higher bits and truncating it there. Whereas our radix_tree swap encoding leaves offset in the lower bits: it's swap "type" (that is, index of swap area) that was truncated. Fix it by reducing the SWP_TYPE_SHIFT() in swapops.h, and removing the broken radix_to_swp_entry(swp_to_radix_entry()) from read_swap_header(). This does not reduce the usable size of a swap area any further, it leaves it as claimed when making the original commit: no change from 3.0 on x86_64, nor on i386 without PAE; but 3.0's 512GB is reduced to 128GB per swapfile on i386 with PAE. It's not a change I would have risked five years ago, but with x86_64 supported for ten years, I believe it's appropriate now. Hmm, and what if some architecture implements its swap pte with offset encoded below type? That would equally break the maximum usable swap offset check. Happily, they all follow the same tradition of encoding offset above type, but I'll prepare a check on that for next. Reported-and-Reviewed-and-Tested-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19USB: fix gathering of interface associationsDaniel Mack
commit b3a3dd074f7053ef824ad077e5331b52220ceba1 upstream. TEAC's UD-H01 (and probably other devices) have a gap in the interface number allocation of their descriptors: Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 220 bNumInterfaces 3 [...] Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 [...] Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 2 bInterfaceCount 2 bFunctionClass 1 Audio bFunctionSubClass 0 bFunctionProtocol 32 iFunction 4 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 [...] Once a configuration is selected, usb_set_configuration() walks the known interfaces of a given configuration and calls find_iad() on each of them to set the interface association pointer the interface is included in. The problem here is that the loop variable is taken for the interface number in the comparison logic that gathers the association. Which is fine as long as the descriptors are sane. In the case above, however, the logic gets out of sync and the interface association fields of all interfaces beyond the interface number gap are wrong. Fix this by passing the interface's bInterfaceNumber to find_iad() instead. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: bEN <ml_all@circa.be> Reported-by: Ivan Perrone <ivanperrone@hotmail.com> Tested-by: ivan perrone <ivanperrone@hotmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-05 20:07:19 +0000