summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-08-15ARM: 7476/1: vfp: only clear vfp state for current cpu in vfp_pm_suspendColin Cross
commit a84b895a2348f0dbff31b71ddf954f70a6cde368 upstream. vfp_pm_suspend runs on each cpu, only clear the hardware state pointer for the current cpu. Prevents a possible crash if one cpu clears the hw state pointer when another cpu has already checked if it is valid. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15ARM: 7466/1: disable interrupt before spinning endlesslyShawn Guo
commit 98bd8b96b26db3399a48202318dca4aaa2515355 upstream. The CPU will endlessly spin at the end of machine_halt and machine_restart calls. However, this will lead to a soft lockup warning after about 20 seconds, if CONFIG_LOCKUP_DETECTOR is enabled, as system timer is still alive. Disable interrupt before going to spin endlessly, so that the lockup warning will never be seen. Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15mm: fix wrong argument of migrate_huge_pages() in soft_offline_huge_page()Joonsoo Kim
commit dc32f63453f56d07a1073a697dcd843dd3098c09 upstream. Commit a6bc32b89922 ("mm: compaction: introduce sync-light migration for use by compaction") changed the declaration of migrate_pages() and migrate_huge_pages(). But it missed changing the argument of migrate_huge_pages() in soft_offline_huge_page(). In this case, we should call migrate_huge_pages() with MIGRATE_SYNC. Additionally, there is a mismatch between type the of argument and the function declaration for migrate_pages(). Signed-off-by: Joonsoo Kim <js1304@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15pcdp: use early_ioremap/early_iounmap to access pcdp tableGreg Pearson
commit 6c4088ac3a4d82779903433bcd5f048c58fb1aca upstream. efi_setup_pcdp_console() is called during boot to parse the HCDP/PCDP EFI system table and setup an early console for printk output. The routine uses ioremap/iounmap to setup access to the HCDP/PCDP table information. The call to ioremap is happening early in the boot process which leads to a panic on x86_64 systems: panic+0x01ca do_exit+0x043c oops_end+0x00a7 no_context+0x0119 __bad_area_nosemaphore+0x0138 bad_area_nosemaphore+0x000e do_page_fault+0x0321 page_fault+0x0020 reserve_memtype+0x02a1 __ioremap_caller+0x0123 ioremap_nocache+0x0012 efi_setup_pcdp_console+0x002b setup_arch+0x03a9 start_kernel+0x00d4 x86_64_start_reservations+0x012c x86_64_start_kernel+0x00fe This replaces the calls to ioremap/iounmap in efi_setup_pcdp_console() with calls to early_ioremap/early_iounmap which can be called during early boot. This patch was tested on an x86_64 prototype system which uses the HCDP/PCDP table for early console setup. Signed-off-by: Greg Pearson <greg.pearson@hp.com> Acked-by: Khalid Aziz <khalid.aziz@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15media: ene_ir: Fix driver initialisationLuis Henriques
commit b31b021988fed9e3741a46918f14ba9b063811db upstream. commit 9ef449c6b31bb6a8e6dedc24de475a3b8c79be20 ("[media] rc: Postpone ISR registration") fixed an early ISR registration on several drivers. It did however also introduced a bug by moving the invocation of pnp_port_start() to the end of the probe function. This patch fixes this issue by moving the invocation of pnp_port_start() to an earlier stage in the probe function. Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15nilfs2: fix deadlock issue between chcp and thaw ioctlsRyusuke Konishi
commit 572d8b3945a31bee7c40d21556803e4807fd9141 upstream. An fs-thaw ioctl causes deadlock with a chcp or mkcp -s command: chcp D ffff88013870f3d0 0 1325 1324 0x00000004 ... Call Trace: nilfs_transaction_begin+0x11c/0x1a0 [nilfs2] wake_up_bit+0x20/0x20 copy_from_user+0x18/0x30 [nilfs2] nilfs_ioctl_change_cpmode+0x7d/0xcf [nilfs2] nilfs_ioctl+0x252/0x61a [nilfs2] do_page_fault+0x311/0x34c get_unmapped_area+0x132/0x14e do_vfs_ioctl+0x44b/0x490 __set_task_blocked+0x5a/0x61 vm_mmap_pgoff+0x76/0x87 __set_current_blocked+0x30/0x4a sys_ioctl+0x4b/0x6f system_call_fastpath+0x16/0x1b thaw D ffff88013870d890 0 1352 1351 0x00000004 ... Call Trace: rwsem_down_failed_common+0xdb/0x10f call_rwsem_down_write_failed+0x13/0x20 down_write+0x25/0x27 thaw_super+0x13/0x9e do_vfs_ioctl+0x1f5/0x490 vm_mmap_pgoff+0x76/0x87 sys_ioctl+0x4b/0x6f filp_close+0x64/0x6c system_call_fastpath+0x16/0x1b where the thaw ioctl deadlocked at thaw_super() when called while chcp was waiting at nilfs_transaction_begin() called from nilfs_ioctl_change_cpmode(). This deadlock is 100% reproducible. This is because nilfs_ioctl_change_cpmode() first locks sb->s_umount in read mode and then waits for unfreezing in nilfs_transaction_begin(), whereas thaw_super() locks sb->s_umount in write mode. The locking of sb->s_umount here was intended to make snapshot mounts and the downgrade of snapshots to checkpoints exclusive. This fixes the deadlock issue by replacing the sb->s_umount usage in nilfs_ioctl_change_cpmode() with a dedicated mutex which protects snapshot mounts. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15SUNRPC: return negative value in case rpcbind client creation errorStanislav Kinsbursky
commit caea33da898e4e14f0ba58173e3b7689981d2c0b upstream. Without this patch kernel will panic on LockD start, because lockd_up() checks lockd_up_net() result for negative value. From my pow it's better to return negative value from rpcbind routines instead of replacing all such checks like in lockd_up(). Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15sunrpc: clnt: Add missing bracesJoe Perches
commit cac5d07e3ca696dcacfb123553cf6c722111cfd3 upstream. Add a missing set of braces that commit 4e0038b6b24 ("SUNRPC: Move clnt->cl_server into struct rpc_xprt") forgot. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15asus-wmi: use ASUS_WMI_METHODID_DSTS2 as default DSTS ID.Alex Hung
commit 63a78bb1051b240417daad3a3fa9c1bb10646dca upstream. According to responses from the BIOS team, ASUS_WMI_METHODID_DSTS2 (0x53545344) will be used as future DSTS ID. In addition, calling asus_wmi_evaluate_method(ASUS_WMI_METHODID_DSTS2, 0, 0, NULL) returns ASUS_WMI_UNSUPPORTED_METHOD in new ASUS laptop PCs. This patch fixes no DSTS ID will be assigned in this case. Signed-off-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the castsTony Luck
commit a119365586b0130dfea06457f584953e0ff6481d upstream. The following build error occured during a ia64 build with swap-over-NFS patches applied. net/core/sock.c:274:36: error: initializer element is not constant net/core/sock.c:274:36: error: (near initialization for 'memalloc_socks') net/core/sock.c:274:36: error: initializer element is not constant This is identical to a parisc build error. Fengguang Wu, Mel Gorman and James Bottomley did all the legwork to track the root cause of the problem. This fix and entire commit log is shamelessly copied from them with one extra detail to change a dubious runtime use of ATOMIC_INIT() to atomic_set() in drivers/char/mspec.c Dave Anglin says: > Here is the line in sock.i: > > struct static_key memalloc_socks = ((struct static_key) { .enabled = > ((atomic_t) { (0) }) }); The above line contains two compound literals. It also uses a designated initializer to initialize the field enabled. A compound literal is not a constant expression. The location of the above statement isn't fully clear, but if a compound literal occurs outside the body of a function, the initializer list must consist of constant expressions. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09Linux 3.4.8v3.4.8Greg Kroah-Hartman
2012-08-09futex: Forbid uaddr == uaddr2 in futex_wait_requeue_pi()Darren Hart
commit 6f7b0a2a5c0fb03be7c25bd1745baa50582348ef upstream. If uaddr == uaddr2, then we have broken the rule of only requeueing from a non-pi futex to a pi futex with this call. If we attempt this, as the trinity test suite manages to do, we miss early wakeups as q.key is equal to key2 (because they are the same uaddr). We will then attempt to dereference the pi_mutex (which would exist had the futex_q been properly requeued to a pi futex) and trigger a NULL pointer dereference. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Dave Jones <davej@redhat.com> Link: http://lkml.kernel.org/r/ad82bfe7f7d130247fbe2b5b4275654807774227.1342809673.git.dvhart@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09futex: Fix bug in WARN_ON for NULL q.pi_stateDarren Hart
commit f27071cb7fe3e1d37a9dbe6c0dfc5395cd40fa43 upstream. The WARN_ON in futex_wait_requeue_pi() for a NULL q.pi_state was testing the address (&q.pi_state) of the pointer instead of the value (q.pi_state) of the pointer. Correct it accordingly. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Dave Jones <davej@redhat.com> Link: http://lkml.kernel.org/r/1c85d97f6e5f79ec389a4ead3e367363c74bd09a.1342809673.git.dvhart@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09futex: Test for pi_mutex on fault in futex_wait_requeue_pi()Darren Hart
commit b6070a8d9853eda010a549fa9a09eb8d7269b929 upstream. If fixup_pi_state_owner() faults, pi_mutex may be NULL. Test for pi_mutex != NULL before testing the owner against current and possibly unlocking it. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Link: http://lkml.kernel.org/r/dc59890338fc413606f04e5c5b131530734dae3d.1342809673.git.dvhart@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09m68k: Correct the Atari ALLOWINT definitionMikael Pettersson
commit c663600584a596b5e66258cc10716fb781a5c2c9 upstream. Booting a 3.2, 3.3, or 3.4-rc4 kernel on an Atari using the `nfeth' ethernet device triggers a WARN_ONCE() in generic irq handling code on the first irq for that device: WARNING: at kernel/irq/handle.c:146 handle_irq_event_percpu+0x134/0x142() irq 3 handler nfeth_interrupt+0x0/0x194 enabled interrupts Modules linked in: Call Trace: [<000299b2>] warn_slowpath_common+0x48/0x6a [<000299c0>] warn_slowpath_common+0x56/0x6a [<00029a4c>] warn_slowpath_fmt+0x2a/0x32 [<0005b34c>] handle_irq_event_percpu+0x134/0x142 [<0005b34c>] handle_irq_event_percpu+0x134/0x142 [<0000a584>] nfeth_interrupt+0x0/0x194 [<001ba0a8>] schedule_preempt_disabled+0x0/0xc [<0005b37a>] handle_irq_event+0x20/0x2c [<0005add4>] generic_handle_irq+0x2c/0x3a [<00002ab6>] do_IRQ+0x20/0x32 [<0000289e>] auto_irqhandler_fixup+0x4/0x6 [<00003144>] cpu_idle+0x22/0x2e [<001b8a78>] printk+0x0/0x18 [<0024d112>] start_kernel+0x37a/0x386 [<0003021d>] __do_proc_dointvec+0xb1/0x366 [<0003021d>] __do_proc_dointvec+0xb1/0x366 [<0024c31e>] _sinittext+0x31e/0x9c0 After invoking the irq's handler the kernel sees !irqs_disabled() and concludes that the handler erroneously enabled interrupts. However, debugging shows that !irqs_disabled() is true even before the handler is invoked, which indicates a problem in the platform code rather than the specific driver. The warning does not occur in 3.1 or older kernels. It turns out that the ALLOWINT definition for Atari is incorrect. The Atari definition of ALLOWINT is ~0x400, the stated purpose of that is to avoid taking HSYNC interrupts. irqs_disabled() returns true if the 3-bit ipl & 4 is non-zero. The nfeth interrupt runs at ipl 3 (it's autovector 3), but 3 & 4 is zero so irqs_disabled() is false, and the warning above is generated. When interrupts are explicitly disabled, ipl is set to 7. When they are enabled, ipl is masked with ALLOWINT. On Atari this will result in ipl = 3, which blocks interrupts at ipl 3 and below. So how come nfeth interrupts at ipl 3 are received at all? That's because ipl is reset to 2 by Atari-specific code in default_idle(), again with the stated purpose of blocking HSYNC interrupts. This discrepancy means that ipl 3 can remain blocked for longer than intended. Both default_idle() and falcon_hblhandler() identify HSYNC with ipl 2, and the "Atari ST/.../F030 Hardware Register Listing" agrees, but ALLOWINT is defined as if HSYNC was ipl 3. [As an experiment I modified default_idle() to reset ipl to 3, and as expected that resulted in all nfeth interrupts being blocked.] The fix is simple: define ALLOWINT as ~0x500 instead. This makes arch_local_irq_enable() consistent with default_idle(), and prevents the !irqs_disabled() problems for ipl 3 interrupts. Tested on Atari running in an Aranym VM. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Michael Schmitz <schmitzmic@googlemail.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09m68k: Make sys_atomic_cmpxchg_32 work on classic m68kAndreas Schwab
commit 9e2760d18b3cf179534bbc27692c84879c61b97c upstream. User space access must always go through uaccess accessors, since on classic m68k user space and kernel space are completely separate. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Tested-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09ASoC: wm8994: Ensure there are enough BCLKs for four channelsMark Brown
commit b8edf3e5522735c8ce78b81845f7a1a2d4a08626 upstream. Otherwise if someone tries to use all four channels on AIF1 with the device in master mode we won't be able to clock out all the data. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09ASoC: wm8962: Allow VMID time to fully rampMark Brown
commit 9d40e5582c9c4cfb6977ba2a0ca9c2ed82c56f21 upstream. Required for reliable power up from cold. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09ALSA: hda - Support dock on Lenovo Thinkpad T530 with ALC269VCTakashi Iwai
commit 707fba3fa76a4c8855552f5d4c1a12430c09bce8 upstream. Lenovo Thinkpad T530 with ALC269VC codec has a dock port but BIOS doesn't set up the pins properly. Enable the pins as well as on Thinkpad X230 Tablet. Reported-and-tested-by: Mario <anyc@hadiko.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09ALSA: hda - Fix mute-LED GPIO initialization for IDT codecsTakashi Iwai
commit 1f43f6c1bc8d740e75b4177eb29110858bb5fea2 upstream. The IDT codecs initializes the GPIO setup for mute LEDs via snd_hda_sync_vmaster_hook(). This works in most cases except for the very first call, which is called before PCM and control creations. Thus before Master switch is set manually via alsactl, the mute LED may show the wrong state, depending on the polarity. Now it's fixed by calling the LED-status update function manually when no vmaster is set yet. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09ALSA: hda - Fix polarity of mute LED on HP Mini 210Takashi Iwai
commit ff8a1e274cbc11da6b57849f925b895a212b56c9 upstream. The commit a3e199732b made the LED working again on HP Mini 210 but with a wrong polarity. This patch fixes the polarity for this machine, and also introduce a new model string "hp-inv-led". Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=772923 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09ALSA: hda - Fix mute-LED GPIO setup for HP Mini 210Takashi Iwai
commit a3e199732b8e2b272e82cc1ccc49c35239ed6c5a upstream. BIOS on HP Mini 210 doesn't provide the proper "HP_Mute_LED" DMI string, thus the driver doesn't initialize the GPIO, too. In the earlier kernel, the driver falls back to GPIO1, but since 3.3 we've stopped this due to other wrongly advertised machines. For fixing this particular case, add a new model type to specify the default polarity explicitly so that the fallback to GPIO1 is handled. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=772923 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09ALSA: hda - Fix invalid D3 of headphone DAC on VT202x codecsTakashi Iwai
commit 6162552b0de6ba80937c3dd53e084967851cd199 upstream. We've got a bug report about the silent output from the headphone on a mobo with VT2021, and spotted out that this was because of the wrong D3 state on the DAC for the headphone output. The bug is triggered by the incomplete check for this DAC in set_widgets_power_state_vt1718S(). It checks only the connectivity of the primary output (0x27) but doesn't consider the path from the headphone pin (0x28). Now this patch fixes the problem by checking both pins for DAC 0x0b. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09ALSA: mpu401: Fix missing initialization of irq fieldTakashi Iwai
commit bc733d495267a23ef8660220d696c6e549ce30b3 upstream. The irq field of struct snd_mpu401 is supposed to be initialized to -1. Since it's set to zero as of now, a probing error before the irq installation results in a kernel warning "Trying to free already-free IRQ 0". Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44821 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09ALSA: snd-usb: fix clock source validity indexDaniel Mack
commit aff252a848ce21b431ba822de3dab9c4c94571cb upstream. uac_clock_source_is_valid() uses the control selector value to access the bmControls bitmap of the clock source unit. This is wrong, as control selector values start from 1, while the bitmap uses all available bits. In other words, "Clock Validity Control" is stored in D3..2, not D5..4 of the clock selector unit's bmControls. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Andreas Koch <andreas@akdesigninc.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09USB: echi-dbgp: increase the controller wait time to come out of halt.Colin Ian King
commit f96a4216e85050c0a9d41a41ecb0ae9d8e39b509 upstream. The default 10 microsecond delay for the controller to come out of halt in dbgp_ehci_startup is too short, so increase it to 1 millisecond. This is based on emperical testing on various USB debug ports on modern machines such as a Lenovo X220i and an Ivybridge development platform that needed to wait ~450-950 microseconds. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09net/tun: fix ioctl() based info leaksMathias Krause
[ Upstream commits a117dacde0288f3ec60b6e5bcedae8fa37ee0dfc and 8bbb181308bc348e02bfdbebdedd4e4ec9d452ce ] The tun module leaks up to 36 bytes of memory by not fully initializing a structure located on the stack that gets copied to user memory by the TUNGETIFF and SIOCGIFHWADDR ioctl()s. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09tcp: perform DMA to userspace only if there is a task waiting for itJiri Kosina
[ Upstream commit 59ea33a68a9083ac98515e4861c00e71efdc49a1 ] Back in 2006, commit 1a2449a87b ("[I/OAT]: TCP recv offload to I/OAT") added support for receive offloading to IOAT dma engine if available. The code in tcp_rcv_established() tries to perform early DMA copy if applicable. It however does so without checking whether the userspace task is actually expecting the data in the buffer. This is not a problem under normal circumstances, but there is a corner case where this doesn't work -- and that's when MSG_TRUNC flag to recvmsg() is used. If the IOAT dma engine is not used, the code properly checks whether there is a valid ucopy.task and the socket is owned by userspace, but misses the check in the dmaengine case. This problem can be observed in real trivially -- for example 'tbench' is a good reproducer, as it makes a heavy use of MSG_TRUNC. On systems utilizing IOAT, you will soon find tbench waiting indefinitely in sk_wait_data(), as they have been already early-copied in tcp_rcv_established() using dma engine. This patch introduces the same check we are performing in the simple iovec copy case to the IOAT case as well. It fixes the indefinite recvmsg(MSG_TRUNC) hangs. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09net: fix rtnetlink IFF_PROMISC and IFF_ALLMULTI handlingJiri Benc
[ Upstream commit b1beb681cba5358f62e6187340660ade226a5fcc ] When device flags are set using rtnetlink, IFF_PROMISC and IFF_ALLMULTI flags are handled specially. Function dev_change_flags sets IFF_PROMISC and IFF_ALLMULTI bits in dev->gflags according to the passed value but do_setlink passes a result of rtnl_dev_combine_flags which takes those bits from dev->flags. This can be easily trigerred by doing: tcpdump -i eth0 & ip l s up eth0 ip sets IFF_UP flag in ifi_flags and ifi_change, which is combined with IFF_PROMISC by rtnl_dev_combine_flags, causing __dev_change_flags to set IFF_PROMISC in gflags. Reported-by: Max Matveev <makc@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09USB: kaweth.c: use GFP_ATOMIC under spin_lockDan Carpenter
[ Upstream commit e4c7f259c5be99dcfc3d98f913590663b0305bf8 ] The problem is that we call this with a spin lock held. The call tree is: kaweth_start_xmit() holds kaweth->device_lock. -> kaweth_async_set_rx_mode() -> kaweth_control() -> kaweth_internal_control_msg() The kaweth_internal_control_msg() function is only called from kaweth_control() which used GFP_ATOMIC for its allocations. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09tcp: Add TCP_USER_TIMEOUT negative value checkHangbin Liu
[ Upstream commit 42493570100b91ef663c4c6f0c0fdab238f9d3c2 ] TCP_USER_TIMEOUT is a TCP level socket option that takes an unsigned int. But patch "tcp: Add TCP_USER_TIMEOUT socket option"(dca43c75) didn't check the negative values. If a user assign -1 to it, the socket will set successfully and wait for 4294967295 miliseconds. This patch add a negative value check to avoid this issue. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09wanmain: comparing array with NULLAlan Cox
[ Upstream commit 8b72ff6484fe303e01498b58621810a114f3cf09 ] gcc really should warn about these ! Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09caif: fix NULL pointer checkAlan Cox
[ Upstream commit c66b9b7d365444b433307ebb18734757cb668a02 ] Reported-by: <rucsoftsec@gmail.com> Resolves-bug: http://bugzilla.kernel.org/show_bug?44441 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09r8169: revert "add byte queue limit support".Francois Romieu
[ Upstream commit 17bcb684f08649a2ab6a7dcd8288332e72d208f1 ] This reverts commit 036dafa28da1e2565a8529de2ae663c37b7a0060. First it appears in bisection, then reverting it solves the usual netdev watchdog problem for different people. I don't have a proper fix yet so get rid of it. Bisected-and-reported-by: Alex Villacís Lasso <a_villacis@palosanto.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09net: Fix references to out-of-scope variables in put_cmsg_compat()Jesper Juhl
[ Upstream commit 818810472b129004c16fc51bf0a570b60776bfb7 ] In net/compat.c::put_cmsg_compat() we may assign 'data' the address of either the 'ctv' or 'cts' local variables inside the 'if (!COMPAT_USE_64BIT_TIME)' branch. Those variables go out of scope at the end of the 'if' statement, so when we use 'data' further down in 'copy_to_user(CMSG_COMPAT_DATA(cm), data, cmlen - sizeof(struct compat_cmsghdr))' there's no telling what it may be refering to - not good. Fix the problem by simply giving 'ctv' and 'cts' function scope. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09cipso: don't follow a NULL pointer when setsockopt() is calledPaul Moore
[ Upstream commit 89d7ae34cdda4195809a5a987f697a517a2a3177 ] As reported by Alan Cox, and verified by Lin Ming, when a user attempts to add a CIPSO option to a socket using the CIPSO_V4_TAG_LOCAL tag the kernel dies a terrible death when it attempts to follow a NULL pointer (the skb argument to cipso_v4_validate() is NULL when called via the setsockopt() syscall). This patch fixes this by first checking to ensure that the skb is non-NULL before using it to find the incoming network interface. In the unlikely case where the skb is NULL and the user attempts to add a CIPSO option with the _TAG_LOCAL tag we return an error as this is not something we want to allow. A simple reproducer, kindly supplied by Lin Ming, although you must have the CIPSO DOI #3 configure on the system first or you will be caught early in cipso_v4_validate(): #include <sys/types.h> #include <sys/socket.h> #include <linux/ip.h> #include <linux/in.h> #include <string.h> struct local_tag { char type; char length; char info[4]; }; struct cipso { char type; char length; char doi[4]; struct local_tag local; }; int main(int argc, char **argv) { int sockfd; struct cipso cipso = { .type = IPOPT_CIPSO, .length = sizeof(struct cipso), .local = { .type = 128, .length = sizeof(struct local_tag), }, }; memset(cipso.doi, 0, 4); cipso.doi[3] = 3; sockfd = socket(AF_INET, SOCK_DGRAM, 0); #define SOL_IP 0 setsockopt(sockfd, SOL_IP, IP_OPTIONS, &cipso, sizeof(struct cipso)); return 0; } CC: Lin Ming <mlin@ss.pku.edu.cn> Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09caif: Fix access to freed pernet memorySjur Brændeland
[ Upstream commit 96f80d123eff05c3cd4701463786b87952a6c3ac ] unregister_netdevice_notifier() must be called before unregister_pernet_subsys() to avoid accessing already freed pernet memory. This fixes the following oops when doing rmmod: Call Trace: [<ffffffffa0f802bd>] caif_device_notify+0x4d/0x5a0 [caif] [<ffffffff81552ba9>] unregister_netdevice_notifier+0xb9/0x100 [<ffffffffa0f86dcc>] caif_device_exit+0x1c/0x250 [caif] [<ffffffff810e7734>] sys_delete_module+0x1a4/0x300 [<ffffffff810da82d>] ? trace_hardirqs_on_caller+0x15d/0x1e0 [<ffffffff813517de>] ? trace_hardirqs_on_thunk+0x3a/0x3 [<ffffffff81696bad>] system_call_fastpath+0x1a/0x1f RIP [<ffffffffa0f7f561>] caif_get+0x51/0xb0 [caif] Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09sctp: Fix list corruption resulting from freeing an association on a listNeil Horman
[ Upstream commit 2eebc1e188e9e45886ee00662519849339884d6d ] A few days ago Dave Jones reported this oops: [22766.294255] general protection fault: 0000 [#1] PREEMPT SMP [22766.295376] CPU 0 [22766.295384] Modules linked in: [22766.387137] ffffffffa169f292 6b6b6b6b6b6b6b6b ffff880147c03a90 ffff880147c03a74 [22766.387135] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 00000000000 [22766.387136] Process trinity-watchdo (pid: 10896, threadinfo ffff88013e7d2000, [22766.387137] Stack: [22766.387140] ffff880147c03a10 [22766.387140] ffffffffa169f2b6 [22766.387140] ffff88013ed95728 [22766.387143] 0000000000000002 [22766.387143] 0000000000000000 [22766.387143] ffff880003fad062 [22766.387144] ffff88013c120000 [22766.387144] [22766.387145] Call Trace: [22766.387145] <IRQ> [22766.387150] [<ffffffffa169f292>] ? __sctp_lookup_association+0x62/0xd0 [sctp] [22766.387154] [<ffffffffa169f2b6>] __sctp_lookup_association+0x86/0xd0 [sctp] [22766.387157] [<ffffffffa169f597>] sctp_rcv+0x207/0xbb0 [sctp] [22766.387161] [<ffffffff810d4da8>] ? trace_hardirqs_off_caller+0x28/0xd0 [22766.387163] [<ffffffff815827e3>] ? nf_hook_slow+0x133/0x210 [22766.387166] [<ffffffff815902fc>] ? ip_local_deliver_finish+0x4c/0x4c0 [22766.387168] [<ffffffff8159043d>] ip_local_deliver_finish+0x18d/0x4c0 [22766.387169] [<ffffffff815902fc>] ? ip_local_deliver_finish+0x4c/0x4c0 [22766.387171] [<ffffffff81590a07>] ip_local_deliver+0x47/0x80 [22766.387172] [<ffffffff8158fd80>] ip_rcv_finish+0x150/0x680 [22766.387174] [<ffffffff81590c54>] ip_rcv+0x214/0x320 [22766.387176] [<ffffffff81558c07>] __netif_receive_skb+0x7b7/0x910 [22766.387178] [<ffffffff8155856c>] ? __netif_receive_skb+0x11c/0x910 [22766.387180] [<ffffffff810d423e>] ? put_lock_stats.isra.25+0xe/0x40 [22766.387182] [<ffffffff81558f83>] netif_receive_skb+0x23/0x1f0 [22766.387183] [<ffffffff815596a9>] ? dev_gro_receive+0x139/0x440 [22766.387185] [<ffffffff81559280>] napi_skb_finish+0x70/0xa0 [22766.387187] [<ffffffff81559cb5>] napi_gro_receive+0xf5/0x130 [22766.387218] [<ffffffffa01c4679>] e1000_receive_skb+0x59/0x70 [e1000e] [22766.387242] [<ffffffffa01c5aab>] e1000_clean_rx_irq+0x28b/0x460 [e1000e] [22766.387266] [<ffffffffa01c9c18>] e1000e_poll+0x78/0x430 [e1000e] [22766.387268] [<ffffffff81559fea>] net_rx_action+0x1aa/0x3d0 [22766.387270] [<ffffffff810a495f>] ? account_system_vtime+0x10f/0x130 [22766.387273] [<ffffffff810734d0>] __do_softirq+0xe0/0x420 [22766.387275] [<ffffffff8169826c>] call_softirq+0x1c/0x30 [22766.387278] [<ffffffff8101db15>] do_softirq+0xd5/0x110 [22766.387279] [<ffffffff81073bc5>] irq_exit+0xd5/0xe0 [22766.387281] [<ffffffff81698b03>] do_IRQ+0x63/0xd0 [22766.387283] [<ffffffff8168ee2f>] common_interrupt+0x6f/0x6f [22766.387283] <EOI> [22766.387284] [22766.387285] [<ffffffff8168eed9>] ? retint_swapgs+0x13/0x1b [22766.387285] Code: c0 90 5d c3 66 0f 1f 44 00 00 4c 89 c8 5d c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 5d e8 4c 89 65 f0 4c 89 6d f8 66 66 66 66 90 <0f> b7 87 98 00 00 00 48 89 fb 49 89 f5 66 c1 c0 08 66 39 46 02 [22766.387307] [22766.387307] RIP [22766.387311] [<ffffffffa168a2c9>] sctp_assoc_is_match+0x19/0x90 [sctp] [22766.387311] RSP <ffff880147c039b0> [22766.387142] ffffffffa16ab120 [22766.599537] ---[ end trace 3f6dae82e37b17f5 ]--- [22766.601221] Kernel panic - not syncing: Fatal exception in interrupt It appears from his analysis and some staring at the code that this is likely occuring because an association is getting freed while still on the sctp_assoc_hashtable. As a result, we get a gpf when traversing the hashtable while a freed node corrupts part of the list. Nominally I would think that an mibalanced refcount was responsible for this, but I can't seem to find any obvious imbalance. What I did note however was that the two places where we create an association using sctp_primitive_ASSOCIATE (__sctp_connect and sctp_sendmsg), have failure paths which free a newly created association after calling sctp_primitive_ASSOCIATE. sctp_primitive_ASSOCIATE brings us into the sctp_sf_do_prm_asoc path, which issues a SCTP_CMD_NEW_ASOC side effect, which in turn adds a new association to the aforementioned hash table. the sctp command interpreter that process side effects has not way to unwind previously processed commands, so freeing the association from the __sctp_connect or sctp_sendmsg error path would lead to a freed association remaining on this hash table. I've fixed this but modifying sctp_[un]hash_established to use hlist_del_init, which allows us to proerly use hlist_unhashed to check if the node is on a hashlist safely during a delete. That in turn alows us to safely call sctp_unhash_established in the __sctp_connect and sctp_sendmsg error paths before freeing them, regardles of what the associations state is on the hash list. I noted, while I was doing this, that the __sctp_unhash_endpoint was using hlist_unhsashed in a simmilar fashion, but never nullified any removed nodes pointers to make that function work properly, so I fixed that up in a simmilar fashion. I attempted to test this using a virtual guest running the SCTP_RR test from netperf in a loop while running the trinity fuzzer, both in a loop. I wasn't able to recreate the problem prior to this fix, nor was I able to trigger the failure after (neither of which I suppose is suprising). Given the trace above however, I think its likely that this is what we hit. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: davej@redhat.com CC: davej@redhat.com CC: "David S. Miller" <davem@davemloft.net> CC: Vlad Yasevich <vyasevich@gmail.com> CC: Sridhar Samudrala <sri@us.ibm.com> CC: linux-sctp@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09sch_sfb: Fix missing NULL checkAlan Cox
[ Upstream commit 7ac2908e4b2edaec60e9090ddb4d9ceb76c05e7d ] Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=44461 Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09bnx2: Fix bug in bnx2_free_tx_skbs().Michael Chan
[ Upstream commit c1f5163de417dab01fa9daaf09a74bbb19303f3c ] In rare cases, bnx2x_free_tx_skbs() can unmap the wrong DMA address when it gets to the last entry of the tx ring. We were not using the proper macro to skip the last entry when advancing the tx index. Reported-by: Zongyun Lai <zlai@vmware.com> Reviewed-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09net: Fix memory leak - vlan_info structAmir Hanania
[ Upstream commit efc73f4bbc238d4f579fb612c04c8e1dd8a82979 ] In driver reload test there is a memory leak. The structure vlan_info was not freed when the driver was removed. It was not released since the nr_vids var is one after last vlan was removed. The nr_vids is one, since vlan zero is added to the interface when the interface is being set, but the vlan zero is not deleted at unregister. Fix - delete vlan zero when we unregister the device. Signed-off-by: Amir Hanania <amir.hanania@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09gianfar: fix potential sk_wmem_alloc imbalanceEric Dumazet
[ Upstream commit 313b037cf054ec908de92fb4c085403ffd7420d4 ] commit db83d136d7f753 (gianfar: Fix missing sock reference when processing TX time stamps) added a potential sk_wmem_alloc imbalance If the new skb has a different truesize than old one, we can get a negative sk_wmem_alloc once new skb is orphaned at TX completion. Now we no longer early orphan skbs in dev_hard_start_xmit(), this probably can lead to fatal bugs. Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Manfred Rudigier <manfred.rudigier@omicron.at> Cc: Claudiu Manoil <claudiu.manoil@freescale.com> Cc: Jiajun Wu <b06378@freescale.com> Cc: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09netem: add limitation to reordered packetsEric Dumazet
[ Upstream commit 960fb66e520a405dde39ff883f17ff2669c13d85 ] Fix two netem bugs : 1) When a frame was dropped by tfifo_enqueue(), drop counter was incremented twice. 2) When reordering is triggered, we enqueue a packet without checking queue limit. This can OOM pretty fast when this is repeated enough, since skbs are orphaned, no socket limit can help in this situation. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mark Gordon <msg@google.com> Cc: Andreas Terzis <aterzis@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09atl1c: fix issue of transmit queue 0 timed outCloud Ren
[ Upstream commit b94e52f62683dc0b00c6d1b58b80929a078c0fd5 ] some people report atl1c could cause system hang with following kernel trace info: --------------------------------------- WARNING: at.../net/sched/sch_generic.c:258 dev_watchdog+0x1db/0x1d0() ... NETDEV WATCHDOG: eth0 (atl1c): transmit queue 0 timed out ... --------------------------------------- This is caused by netif_stop_queue calling when cable Link is down. So remove netif_stop_queue, because link_watch will take it over. Signed-off-by: xiong <xiong@qca.qualcomm.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Cloud Ren <cjren@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09ext4: undo ext4_calc_metadata_amount if we fail to claim spaceTheodore Ts'o
commit 03179fe92318e7934c180d96f12eff2cb36ef7b6 upstream. The function ext4_calc_metadata_amount() has side effects, although it's not obvious from its function name. So if we fail to claim space, regardless of whether we retry to claim the space again, or return an error, we need to undo these side effects. Otherwise we can end up incorrectly calculating the number of metadata blocks needed for the operation, which was responsible for an xfstests failure for test #271 when using an ext2 file system with delalloc enabled. Reported-by: Brian Foster <bfoster@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09ext4: don't let i_reserved_meta_blocks go negativeBrian Foster
commit 97795d2a5b8d3c8dc4365d4bd3404191840453ba upstream. If we hit a condition where we have allocated metadata blocks that were not appropriately reserved, we risk underflow of ei->i_reserved_meta_blocks. In turn, this can throw sbi->s_dirtyclusters_counter significantly out of whack and undermine the nondelalloc fallback logic in ext4_nonda_switch(). Warn if this occurs and set i_allocated_meta_blocks to avoid this problem. This condition is reproduced by xfstests 270 against ext2 with delalloc enabled: Mar 28 08:58:02 localhost kernel: [ 171.526344] EXT4-fs (loop1): delayed block allocation failed for inode 14 at logical offset 64486 with max blocks 64 with error -28 Mar 28 08:58:02 localhost kernel: [ 171.526346] EXT4-fs (loop1): This should not happen!! Data will be lost 270 ultimately fails with an inconsistent filesystem and requires an fsck to repair. The cause of the error is an underflow in ext4_da_update_reserve_space() due to an unreserved meta block allocation. Signed-off-by: Brian Foster <bfoster@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09ext4: fix hole punch failure when depth is greater than 0Ashish Sangwan
commit 968dee77220768a5f52cf8b21d0bdb73486febef upstream. Whether to continue removing extents or not is decided by the return value of function ext4_ext_more_to_rm() which checks 2 conditions: a) if there are no more indexes to process. b) if the number of entries are decreased in the header of "depth -1". In case of hole punch, if the last block to be removed is not part of the last extent index than this index will not be deleted, hence the number of valid entries in the extent header of "depth - 1" will remain as it is and ext4_ext_more_to_rm will return 0 although the required blocks are not yet removed. This patch fixes the above mentioned problem as instead of removing the extents from the end of file, it starts removing the blocks from the particular extent from which removing blocks is actually required and continue backward until done. Signed-off-by: Ashish Sangwan <ashish.sangwan2@gmail.com> Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09ext4: fix overhead calculation used by ext4_statfs()Theodore Ts'o
commit 952fc18ef9ec707ebdc16c0786ec360295e5ff15 upstream. Commit f975d6bcc7a introduced bug which caused ext4_statfs() to miscalculate the number of file system overhead blocks. This causes the f_blocks field in the statfs structure to be larger than it should be. This would in turn cause the "df" output to show the number of data blocks in the file system and the number of data blocks used to be larger than they should be. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09ext4: pass a char * to ext4_count_free() instead of a buffer_head ptrTheodore Ts'o
commit f6fb99cadcd44660c68e13f6eab28333653621e6 upstream. Make it possible for ext4_count_free to operate on buffers and not just data in buffer_heads. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09nouveau: Fix alignment requirements on src and dst addressesMaarten Lankhorst
commit ce806a30470bcd846d148bf39d46de3ad7748228 upstream. Linear copy works by adding the offset to the buffer address, which may end up not being 16-byte aligned. Some tests I've written for prime_pcopy show that the engine allows this correctly, so the restriction on lowest 4 bits of address can be lifted safely. The comments added were by envyas, I think because I used a newer version. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-02-07 03:47:43 +0000