summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-01-17staging: vt6656: 64bit fixes: vCommandTimerWait change calculation of timer.Malcolm Priestley
commit 70e227790d4ee4590023d8041a3485f8053593fc upstream. The timer appears to run too fast/race on 64 bit systems. Using msecs_to_jiffies seems to cause a deadlock on 64 bit. A calculation of (MSecond * HZ) / 1000 appears to run satisfactory. Change BSSIDInfoCount to u32. After this patch the driver can be successfully connect on little endian 64/32 bit systems. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: vt6656: 64bit fixes: key.c/h change unsigned long to u32Malcolm Priestley
commit c0d05b305b00c698b0a8c1b3d46c9380bce9db45 upstream. Fixes long issues. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: vt6656: 64 bit fixes: fix long warning messages.Malcolm Priestley
commit b4dc03af5513774277c9c36b12a25cd3f25f4404 upstream. Fixes long warning messages from patch [PATCH 08/14] staging: vt6656: 64 bit fixes : correct all type sizes Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: vt6656: 64 bit fixes : correct all type sizesMalcolm Priestley
commit 7730492855a2f9c828599bcd8d62760f96d319e4 upstream. After this patch all BYTE/WORD/DWORD types can be replaced with the appropriate u sizes. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: vt6656: 64 bit fixes: use u32 for QWORD definition.Malcolm Priestley
commit a552397d5e4ef0cc0bd3e9595d6acc9a3b381171 upstream. Size of long issues replace with u32. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: vt6656: [BUG] out of bound array reference in RFbSetPower.Malcolm Priestley
commit ab1dd9963137a1e122004d5378a581bf16ae9bc8 upstream. Calling RFbSetPower with uCH zero value will cause out of bound array reference. This causes 64 bit kernels to oops on boot. Note: Driver does not function on 64 bit kernels and should be blacklisted on them. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17dm ioctl: prevent unsafe change to dm_ioctl data_sizeAlasdair G Kergon
commit e910d7ebecd1aac43125944a8641b6cb1a0dfabe upstream. Abort dm ioctl processing if userspace changes the data_size parameter after we validated it but before we finished copying the data buffer from userspace. The dm ioctl parameters are processed in the following sequence: 1. ctl_ioctl() calls copy_params(); 2. copy_params() makes a first copy of the fixed-sized portion of the userspace parameters into the local variable "tmp"; 3. copy_params() then validates tmp.data_size and allocates a new structure big enough to hold the complete data and copies the whole userspace buffer there; 4. ctl_ioctl() reads userspace data the second time and copies the whole buffer into the pointer "param"; 5. ctl_ioctl() reads param->data_size without any validation and stores it in the variable "input_param_size"; 6. "input_param_size" is further used as the authoritative size of the kernel buffer. The problem is that userspace code could change the contents of user memory between steps 2 and 4. In particular, the data_size parameter can be changed to an invalid value after the kernel has validated it. This lets userspace force the kernel to access invalid kernel memory. The fix is to ensure that the size has not changed at step 4. This patch shouldn't have a security impact because CAP_SYS_ADMIN is required to run this code, but it should be fixed anyway. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17ring-buffer: Fix race between integrity check and readersSteven Rostedt
commit 9366c1ba13fbc41bdb57702e75ca4382f209c82f upstream. The function rb_check_pages() was added to make sure the ring buffer's pages were sane. This check is done when the ring buffer size is modified as well as when the iterator is released (closing the "trace" file), as that was considered a non fast path and a good place to do a sanity check. The problem is that the check does not have any locks around it. If one process were to read the trace file, and another were to read the raw binary file, the check could happen while the reader is reading the file. The issues with this is that the check requires to clear the HEAD page before doing the full check and it restores it afterward. But readers require the HEAD page to exist before it can read the buffer, otherwise it gives a nasty warning and disables the buffer. By adding the reader lock around the check, this keeps the race from happening. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17RDMA/nes: Fix for terminate timer crashTatyana Nikolova
commit 7bfcfa51c35cdd2d37e0d70fc11790642dd11fb3 upstream. The terminate timer needs to be initialized just once. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17RDMA/nes: Fix for crash when registering zero length MR for CQTatyana Nikolova
commit 7d9c199a55200c9b9fcad08e150470d02fb385be upstream. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: make the panel fitter work on pipes B and C on IVBPaulo Zanoni
commit 13888d78c664a1f61d7b09d282f5916993827a40 upstream. I actually found this problem on Haswell, but then discovered Ivy Bridge also has it by reading the spec. I don't have the hardware to test this. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17i2400m: add Intel 6150 device IDsDan Williams
commit 999a7c5776a0ed2133645fa7e008bec05bda9254 upstream. Add device IDs for WiMAX function of Intel 6150 cards. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17jffs2: hold erase_completion_lock on exitAlexey Khoroshilov
commit 2cbba75a56ea78e6876b4e2547a882f10b3fe72b upstream. Users of jffs2_do_reserve_space() expect they still held erase_completion_lock after call to it. But there is a path where jffs2_do_reserve_space() leaves erase_completion_lock unlocked. The patch fixes it. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17SUNRPC: Ensure that we free the rpc_task after cleanups are doneTrond Myklebust
commit c6567ed1402c55e19b012e66a8398baec2a726f3 upstream. This patch ensures that we free the rpc_task after the cleanup callbacks are done in order to avoid a deadlock problem that can be triggered if the callback needs to wait for another workqueue item to complete. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Weston Andros Adamson <dros@netapp.com> Cc: Tejun Heo <tj@kernel.org> Cc: Bruce Fields <bfields@fieldses.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17ext4: fix memory leak in ext4_xattr_set_acl()'s error pathEugene Shatokhin
commit 24ec19b0ae83a385ad9c55520716da671274b96c upstream. In ext4_xattr_set_acl(), if ext4_journal_start() returns an error, posix_acl_release() will not be called for 'acl' which may result in a memory leak. This patch fixes that. Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Eugene Shatokhin <eugene.shatokhin@rosalab.ru> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17mfd: Only unregister platform devices allocated by the mfd coreCharles Keepax
commit b9fbb62eb61452d728c39b2e5020739c575aac53 upstream. mfd_remove_devices would iterate over all devices sharing a parent with an mfd device regardless of whether they were allocated by the mfd core or not. This especially caused problems when the device structure was not contained within a platform_device, because to_platform_device is used on each device pointer. This patch defines a device_type for mfd devices and checks this is present from mfd_remove_devices_fn before processing the device. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Tested-by: Peter Tyser <ptyser@xes-inc.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17target/tcm_fc: fix the lockdep warning due to inconsistent lock stateYi Zou
commit 9f4ad44b264f8bb61ffdd607148215566568430d upstream. The lockdep warning below is in theory correct but it will be in really weird rare situation that ends up that deadlock since the tcm fc session is hashed based the rport id. Nonetheless, the complaining below is about rcu callback that does the transport_deregister_session() is happening in softirq, where transport_register_session() that happens earlier is not. This triggers the lockdep warning below. So, just fix this to make lockdep happy by disabling the soft irq before calling transport_register_session() in ft_prli. BTW, this was found in FCoE VN2VN over two VMs, couple of create and destroy would get this triggered. v1: was enforcing register to be in softirq context which was not righ. See, http://www.spinics.net/lists/target-devel/msg03614.html v2: following comments from Roland&Nick (thanks), it seems we don't have to do transport_deregister_session() in rcu callback, so move it into ft_sess_free() but still do kfree() of the corresponding ft_sess struct in rcu callback to make sure the ft_sess is not freed till the rcu callback. ... [ 1328.370592] scsi2 : FCoE Driver [ 1328.383429] fcoe: No FDMI support. [ 1328.384509] host2: libfc: Link up on port (000000) [ 1328.934229] host2: Assigned Port ID 00a292 [ 1357.232132] host2: rport 00a393: Remove port [ 1357.232568] host2: rport 00a393: Port sending LOGO from Ready state [ 1357.233692] host2: rport 00a393: Delete port [ 1357.234472] host2: rport 00a393: work event 3 [ 1357.234969] host2: rport 00a393: callback ev 3 [ 1357.235979] host2: rport 00a393: Received a LOGO response closed [ 1357.236706] host2: rport 00a393: work delete [ 1357.237481] [ 1357.237631] ================================= [ 1357.238064] [ INFO: inconsistent lock state ] [ 1357.238450] 3.7.0-rc7-yikvm+ #3 Tainted: G O [ 1357.238450] --------------------------------- [ 1357.238450] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 1357.238450] ksoftirqd/0/3 [HC0[0]:SC1[1]:HE0:SE0] takes: [ 1357.238450] (&(&se_tpg->session_lock)->rlock){+.?...}, at: [<ffffffffa01eacd4>] transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] {SOFTIRQ-ON-W} state was registered at: [ 1357.238450] [<ffffffff810834f5>] mark_held_locks+0x6d/0x95 [ 1357.238450] [<ffffffff8108364a>] trace_hardirqs_on_caller+0x12d/0x197 [ 1357.238450] [<ffffffff810836c1>] trace_hardirqs_on+0xd/0xf [ 1357.238450] [<ffffffff8149caba>] _raw_spin_unlock_irq+0x2d/0x45 [ 1357.238450] [<ffffffffa01e8d10>] __transport_register_session+0xb8/0x122 [target_core_mod] [ 1357.238450] [<ffffffffa01e8dbe>] transport_register_session+0x44/0x5a [target_core_mod] [ 1357.238450] [<ffffffffa018e32c>] ft_prli+0x1e3/0x275 [tcm_fc] [ 1357.238450] [<ffffffffa0160e8d>] fc_rport_recv_req+0x95e/0xdc5 [libfc] [ 1357.238450] [<ffffffffa015be88>] fc_lport_recv_els_req+0xc4/0xd5 [libfc] [ 1357.238450] [<ffffffffa015c778>] fc_lport_recv_req+0x12f/0x18f [libfc] [ 1357.238450] [<ffffffffa015a6d7>] fc_exch_recv+0x8ba/0x981 [libfc] [ 1357.238450] [<ffffffffa0176d7a>] fcoe_percpu_receive_thread+0x47a/0x4e2 [fcoe] [ 1357.238450] [<ffffffff810549f1>] kthread+0xb1/0xb9 [ 1357.238450] [<ffffffff814a40ec>] ret_from_fork+0x7c/0xb0 [ 1357.238450] irq event stamp: 275411 [ 1357.238450] hardirqs last enabled at (275410): [<ffffffff810bb6a0>] rcu_process_callbacks+0x229/0x42a [ 1357.238450] hardirqs last disabled at (275411): [<ffffffff8149c2f7>] _raw_spin_lock_irqsave+0x22/0x8e [ 1357.238450] softirqs last enabled at (275394): [<ffffffff8103d669>] __do_softirq+0x246/0x26f [ 1357.238450] softirqs last disabled at (275399): [<ffffffff8103d6bb>] run_ksoftirqd+0x29/0x62 [ 1357.238450] [ 1357.238450] other info that might help us debug this: [ 1357.238450] Possible unsafe locking scenario: [ 1357.238450] [ 1357.238450] CPU0 [ 1357.238450] ---- [ 1357.238450] lock(&(&se_tpg->session_lock)->rlock); [ 1357.238450] <Interrupt> [ 1357.238450] lock(&(&se_tpg->session_lock)->rlock); [ 1357.238450] [ 1357.238450] *** DEADLOCK *** [ 1357.238450] [ 1357.238450] no locks held by ksoftirqd/0/3. [ 1357.238450] [ 1357.238450] stack backtrace: [ 1357.238450] Pid: 3, comm: ksoftirqd/0 Tainted: G O 3.7.0-rc7-yikvm+ #3 [ 1357.238450] Call Trace: [ 1357.238450] [<ffffffff8149399a>] print_usage_bug+0x1f5/0x206 [ 1357.238450] [<ffffffff8100da59>] ? save_stack_trace+0x2c/0x49 [ 1357.238450] [<ffffffff81082aae>] ? print_irq_inversion_bug.part.14+0x1ae/0x1ae [ 1357.238450] [<ffffffff81083336>] mark_lock+0x106/0x258 [ 1357.238450] [<ffffffff81084e34>] __lock_acquire+0x2e7/0xe53 [ 1357.238450] [<ffffffff8102903d>] ? pvclock_clocksource_read+0x48/0xb4 [ 1357.238450] [<ffffffff810ba6a3>] ? rcu_process_gp_end+0xc0/0xc9 [ 1357.238450] [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffff81085ef1>] lock_acquire+0x119/0x143 [ 1357.238450] [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffff8149c329>] _raw_spin_lock_irqsave+0x54/0x8e [ 1357.238450] [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffffa01eacd4>] transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffff810bb6a0>] ? rcu_process_callbacks+0x229/0x42a [ 1357.238450] [<ffffffffa018ddc5>] ft_sess_rcu_free+0x17/0x24 [tcm_fc] [ 1357.238450] [<ffffffffa018ddae>] ? ft_sess_free+0x1b/0x1b [tcm_fc] [ 1357.238450] [<ffffffff810bb6d7>] rcu_process_callbacks+0x260/0x42a [ 1357.238450] [<ffffffff8103d55d>] __do_softirq+0x13a/0x26f [ 1357.238450] [<ffffffff8149b34e>] ? __schedule+0x65f/0x68e [ 1357.238450] [<ffffffff8103d6bb>] run_ksoftirqd+0x29/0x62 [ 1357.238450] [<ffffffff8105c83c>] smpboot_thread_fn+0x1a5/0x1aa [ 1357.238450] [<ffffffff8105c697>] ? smpboot_unregister_percpu_thread+0x47/0x47 [ 1357.238450] [<ffffffff810549f1>] kthread+0xb1/0xb9 [ 1357.238450] [<ffffffff8149b49d>] ? wait_for_common+0xbb/0x10a [ 1357.238450] [<ffffffff81054940>] ? __init_kthread_worker+0x59/0x59 [ 1357.238450] [<ffffffff814a40ec>] ret_from_fork+0x7c/0xb0 [ 1357.238450] [<ffffffff81054940>] ? __init_kthread_worker+0x59/0x59 [ 1417.440099] rport-2:0-0: blocked FC remote port time out: removing rport Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Open-FCoE <devel@open-fcoe.org> Cc: Nicholas A. Bellinger <nab@risingtidesystems.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17libata: fix Null pointer dereference on disk errorXiaotian Feng
commit 26cd4d65deba587f3cf2329b6869ce02bcbe68ec upstream. Following oops were observed when disk error happened: [ 4272.896937] sd 0:0:0:0: [sda] Unhandled error code [ 4272.896939] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 4272.896942] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 5a de a7 00 00 08 00 [ 4272.896951] end_request: I/O error, dev sda, sector 5955239 [ 4291.574947] BUG: unable to handle kernel NULL pointer dereference at (null) [ 4291.658305] IP: [] ahci_activity_show+0x1/0x40 [ 4291.730090] PGD 76dbbc067 PUD 6c4fba067 PMD 0 [ 4291.783408] Oops: 0000 [#1] SMP [ 4291.822100] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/sw_activity [ 4291.934235] CPU 9 [ 4291.958301] Pid: 27942, comm: hwinfo ...... ata_scsi_find_dev could return NULL, so ata_scsi_activity_{show,store} should check if atadev is NULL. Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17libata: set dma_mode to 0xff in resetAaron Lu
commit 5416912af75de9cba5d1c75b99a7888b0bbbd2fb upstream. ata_device->dma_mode's initial value is zero, which is not a valid dma mode, but ata_dma_enabled will return true for this value. This patch sets dma_mode to 0xff in reset function, so that ata_dma_enabled will not return true for this case, or it will cause problem for pata_acpi. The corrsponding bugzilla page is at: https://bugzilla.kernel.org/show_bug.cgi?id=49151 Reported-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Tested-by: Szymon Janc <szymon@janc.net.pl> Tested-by: Dutra Julio <dutra.julio@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17sata_promise: fix hardreset lockdep errorMikael Pettersson
commit 3100d49d3cd236443faae9d81137c81b22d36003 upstream. sata_promise's pdc_hard_reset_port() needs to serialize because it flips a port-specific bit in controller register that's shared by all ports. The code takes the ata host lock for this, but that's broken because an interrupt may arrive on our irq during the hard reset sequence, and that too will take the ata host lock. With lockdep enabled a big nasty warning is seen. Fixed by adding private state to the ata host structure, containing a second lock used only for serializing the hard reset sequences. This eliminated the lockdep warnings both on my test rig and on the original reporter's machine. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Adko Branil <adkobranil@yahoo.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17SCSI: qla2xxx: Test and clear FCPORT_UPDATE_NEEDED atomically.David Jeffery
commit a394aac88506159e047630fc90dc2242568382d8 upstream. When the qla2xxx driver loses access to multiple, remote ports, there is a race condition which can occur which will keep the request stuck on a scsi request queue indefinitely. This bad state occurred do to a race condition with how the FCPORT_UPDATE_NEEDED bit is set in qla2x00_schedule_rport_del(), and how it is cleared in qla2x00_do_dpc(). The problem port has its drport pointer set, but it has never been processed by the driver to inform the fc transport that the port has been lost. qla2x00_schedule_rport_del() sets drport, and then sets the FCPORT_UPDATE_NEEDED bit. In qla2x00_do_dpc(), the port lists are walked and any drport pointer is handled and the fc transport informed of the port loss, then the FCPORT_UPDATE_NEEDED bit is cleared. This leaves a race where the dpc thread is processing one port removal, another port removal is marked with a call to qla2x00_schedule_rport_del(), and the dpc thread clears the bit for both removals, even though only the first removal was actually handled. Until another event occurs to set FCPORT_UPDATE_NEEDED, the later port removal is never finished and qla2xxx stays in a bad state which causes requests to become stuck on request queues. This patch updates the driver to test and clear FCPORT_UPDATE_NEEDED atomically. This ensures the port state changes are processed and not lost. Signed-off-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17SCSI: mvsas: fix undefined bit shiftXi Wang
commit beecadea1b8d67f591b13f7099559f32f3fd601d upstream. The macro bit(n) is defined as ((u32)1 << n), and thus it doesn't work with n >= 32, such as in mvs_94xx_assign_reg_set(): if (i >= 32) { mvi->sata_reg_set |= bit(i); ... } The shift ((u32)1 << n) with n >= 32 also leads to undefined behavior. The result varies depending on the architecture. This patch changes bit(n) to do a 64-bit shift. It also simplifies mv_ffc64() using __ffs64(), since invoking ffz() with ~0 is undefined. Signed-off-by: Xi Wang <xi.wang@gmail.com> Acked-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17firewire: net: Fix handling of fragmented multicast/broadcast packets.Stephan Gatzka
commit 9d2373420900a39f5212a3b289331aa3535b1000 upstream. This patch fixes both the transmit and receive portion of sending fragmented mutlicast and broadcast packets. The transmit section was broken because the offset for INTFRAG and LASTFRAG packets were just miscalculated by IEEE1394_GASP_HDR_SIZE (which was reserved with skb_push() in fwnet_send_packet). The receive section was broken because in fwnet_incoming_packet is a call to fwnet_peer_find_by_node_id(). Called with generation == -1 it will not find a peer and the partial datagrams are associated to a peer. [Stefan R: The fix to use context->card->generation is not perfect. It relies on the IR tasklet which processes packets from the prior bus generation to run before the self-ID-complete worklet which sets the current card generation. Alas, there is no simple way of a race-free implementation. Let's do it this way for now.] Signed-off-by: Stephan Gatzka <stephan.gatzka@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17ath9k: ar9003: fix OTP register offsets for AR9340Gabor Juhos
commit b3cd8021379306c0be6932e4d3b4b01efc681769 upstream. Trying to access the OTP memory on the AR9340 causes a data bus error like this: Data bus error, epc == 86e84164, ra == 86e84164 Oops[#1]: Cpu 0 $ 0 : 00000000 00000061 deadc0de 00000000 $ 4 : b8115f18 00015f18 00000007 00000004 $ 8 : 00000001 7c7c3c7c 7c7c7c7c 7c7c7c7c $12 : 7c7c3c7c 001f0041 00000000 7c7c7c3c $16 : 86ee0000 00015f18 00000000 00000007 $20 : 00000004 00000064 00000004 86d71c44 $24 : 00000000 86e6ca00 $28 : 86d70000 86d71b20 86ece0c0 86e84164 Hi : 00000000 Lo : 00000064 epc : 86e84164 ath9k_hw_wait+0x58/0xb0 [ath9k_hw] Tainted: G O ra : 86e84164 ath9k_hw_wait+0x58/0xb0 [ath9k_hw] Status: 1100d403 KERNEL EXL IE Cause : 4080801c PrId : 0001974c (MIPS 74Kc) Modules linked in: ath9k(O+) ath9k_common(O) ath9k_hw(O) ath(O) ar934x_nfc mac80211(O) usbcore usb_common scsi_mod nls_base nand nand_ecc nand_ids crc_ccitt cfg80211(O) compat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio Process insmod (pid: 459, threadinfo=86d70000, task=87942140, tls=779ac440) Stack : 802fb500 000200da 804db150 804e0000 87816130 86ee0000 00010000 86d71b88 86d71bc0 00000004 00000003 86e9fcd0 80305300 0002c0d0 86e74c50 800b4c20 000003e8 00000001 00000000 86ee0000 000003ff 86e9fd64 80305300 80123938 fffffffc 00000004 000058bc 00000000 86ea0000 86ee0000 000001ff 878d6000 99999999 86e9fdc0 86ee0fcc 86e9e664 0000c0d0 86ee0000 0000700000007000 ... Call Trace: [<86e84164>] ath9k_hw_wait+0x58/0xb0 [ath9k_hw] [<86e9fcd0>] ath9k_hw_setup_statusring+0x16b8/0x1c7c [ath9k_hw] Code: 0000a812 0040f809 00000000 <00531024> 1054000b 24020001 0c05b5dc 2404000a 26520001 The cause of the error is that the OTP register offsets are different on the AR9340 than the actually used values. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17Revert "ath9k_hw: Update AR9003 high_power tx gain table"Felix Fietkau
commit 9c170e068636deb3e3f96114034bb711675f0faa upstream. This reverts commit f74b9d365ddd33a375802b064f96a5d0e99af7c0. Turns out reverting commit a240dc7b3c7463bd60cf0a9b2a90f52f78aae0fd "ath9k_hw: Updated AR9003 tx gain table for 5GHz" was not enough to bring the tx power back to normal levels on devices like the Buffalo WZR-HP-G450H, this one needs to be reverted as well. This revert improves tx power by ~10 db on that device Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: rmanohar@qca.qualcomm.com Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17mm: use aligned zone start for pfn_to_bitidx calculationLaura Abbott
commit c060f943d0929f3e429c5d9522290584f6281d6e upstream. The current calculation in pfn_to_bitidx assumes that (pfn - zone->zone_start_pfn) >> pageblock_order will return the same bit for all pfn in a pageblock. If zone_start_pfn is not aligned to pageblock_nr_pages, this may not always be correct. Consider the following with pageblock order = 10, zone start 2MB: pfn | pfn - zone start | (pfn - zone start) >> page block order ---------------------------------------------------------------- 0x26000 | 0x25e00 | 0x97 0x26100 | 0x25f00 | 0x97 0x26200 | 0x26000 | 0x98 0x26300 | 0x26100 | 0x98 This means that calling {get,set}_pageblock_migratetype on a single page will not set the migratetype for the full block. Fix this by rounding down zone_start_pfn when doing the bitidx calculation. For our use case, the effects of this bug were mostly tied to the fact that CMA allocations would either take a long time or fail to happen. Depending on the driver using CMA, this could result in anything from visual glitches to application failures. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17mm: compaction: fix echo 1 > compact_memory return error issueJason Liu
commit 7964c06d66c76507d8b6b662bffea770c29ef0ce upstream. when run the folloing command under shell, it will return error sh/$ echo 1 > /proc/sys/vm/compact_memory sh/$ sh: write error: Bad address After strace, I found the following log: ... write(1, "1\n", 2) = 3 write(1, "", 4294967295) = -1 EFAULT (Bad address) write(2, "echo: write error: Bad address\n", 31echo: write error: Bad address ) = 31 This tells system return 3(COMPACT_COMPLETE) after write data to compact_memory. The fix is to make the system just return 0 instead 3(COMPACT_COMPLETE) from sysctl_compaction_handler after compaction_nodes finished. Signed-off-by: Jason Liu <r64343@freescale.com> Suggested-by: David Rientjes <rientjes@google.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17s390/cio: fix pgid reserved checkSebastian Ott
commit d99e79ec5574fc556c988f613ed6175f6de66f4a upstream. The check to whom a device is reserved is done by checking the path state of the affected channel paths. If it turns out that one path is flagged as reserved by someone else the whole device is marked as such. However the meaning of the RESVD_ELSE bit is that the addressed device is reserved to a different pathgroup (and not reserved to a different LPAR). If we do this test on a path which is currently not a member of the pathgroup we could erroneously mark the device as reserved to someone else. To fix this collect the reserved state for all potential members of the pathgroup and only mark the device as reserved if all of those potential members have the RESVD_ELSE bit set. Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17powerpc/vdso: Remove redundant locking in update_vsyscall_tz()Shan Hai
commit ce73ec6db47af84d1466402781ae0872a9e7873c upstream. The locking in update_vsyscall_tz() is not only unnecessary because the vdso code copies the data unproteced in __kernel_gettimeofday() but also introduces a hard to reproduce race condition between update_vsyscall() and update_vsyscall_tz(), which causes user space process to loop forever in vdso code. The following patch removes the locking from update_vsyscall_tz(). Locking is not only unnecessary because the vdso code copies the data unprotected in __kernel_gettimeofday() but also erroneous because updating the tb_update_count is not atomic and introduces a hard to reproduce race condition between update_vsyscall() and update_vsyscall_tz(), which further causes user space process to loop forever in vdso code. The below scenario describes the race condition, x==0 Boot CPU other CPU proc_P: x==0 timer interrupt update_vsyscall x==1 x++;sync settimeofday update_vsyscall_tz x==2 x++;sync x==3 sync;x++ sync;x++ proc_P: x==3 (loops until x becomes even) Because the ++ operator would be implemented as three instructions and not atomic on powerpc. A similar change was made for x86 in commit 6c260d58634 ("x86: vdso: Remove bogus locking in update_vsyscall_tz") Signed-off-by: Shan Hai <shan.hai@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17powerpc: Fix CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n buildAnton Blanchard
commit 11ee7e99f35ecb15f59b21da6a82d96d2cd3fcc8 upstream. If we build a kernel with CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n, the kernel fails when we run at a non zero offset. It turns out we were incorrectly wrapping some of the relocatable kernel code with CONFIG_CRASH_DUMP. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11Linux 3.0.58v3.0.58Greg Kroah-Hartman
2013-01-11can: Do not call dev_put if restart timer is running upon closeAlexander Stein
commit ab48b03ec9ae1840a1e427e2375bd0d9d554b4ed upstream. If the restart timer is running due to BUS-OFF and the device is disconnected an dev_put will decrease the usage counter to -1 thus blocking the interface removal, resulting in the following dmesg lines repeating every 10s: can: notifier: receive list not found for dev can0 can: notifier: receive list not found for dev can0 can: notifier: receive list not found for dev can0 unregister_netdevice: waiting for can0 to become free. Usage count = -1 Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11mm: limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPTMichal Hocko
commit 53a59fc67f97374758e63a9c785891ec62324c81 upstream. Since commit e303297e6c3a ("mm: extended batches for generic mmu_gather") we are batching pages to be freed until either tlb_next_batch cannot allocate a new batch or we are done. This works just fine most of the time but we can get in troubles with non-preemptible kernel (CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY) on large machines where too aggressive batching might lead to soft lockups during process exit path (exit_mmap) because there are no scheduling points down the free_pages_and_swap_cache path and so the freeing can take long enough to trigger the soft lockup. The lockup is harmless except when the system is setup to panic on softlockup which is not that unusual. The simplest way to work around this issue is to limit the maximum number of batches in a single mmu_gather. 10k of collected pages should be safe to prevent from soft lockups (we would have 2ms for one) even if they are all freed without an explicit scheduling point. This patch doesn't add any new explicit scheduling points because it relies on zap_pmd_range during page tables zapping which calls cond_resched per PMD. The following lockup has been reported for 3.0 kernel with a huge process (in order of hundreds gigs but I do know any more details). BUG: soft lockup - CPU#56 stuck for 22s! [kernel:31053] Modules linked in: af_packet nfs lockd fscache auth_rpcgss nfs_acl sunrpc mptctl mptbase autofs4 binfmt_misc dm_round_robin dm_multipath bonding cpufreq_conservative cpufreq_userspace cpufreq_powersave pcc_cpufreq mperf microcode fuse loop osst sg sd_mod crc_t10dif st qla2xxx scsi_transport_fc scsi_tgt netxen_nic i7core_edac iTCO_wdt joydev e1000e serio_raw pcspkr edac_core iTCO_vendor_support acpi_power_meter rtc_cmos hpwdt hpilo button container usbhid hid dm_mirror dm_region_hash dm_log linear uhci_hcd ehci_hcd usbcore usb_common scsi_dh_emc scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh dm_snapshot pcnet32 mii edd dm_mod raid1 ext3 mbcache jbd fan thermal processor thermal_sys hwmon cciss scsi_mod Supported: Yes CPU 56 Pid: 31053, comm: kernel Not tainted 3.0.31-0.9-default #1 HP ProLiant DL580 G7 RIP: 0010: _raw_spin_unlock_irqrestore+0x8/0x10 RSP: 0018:ffff883ec1037af0 EFLAGS: 00000206 RAX: 0000000000000e00 RBX: ffffea01a0817e28 RCX: ffff88803ffd9e80 RDX: 0000000000000200 RSI: 0000000000000206 RDI: 0000000000000206 RBP: 0000000000000002 R08: 0000000000000001 R09: ffff887ec724a400 R10: 0000000000000000 R11: dead000000200200 R12: ffffffff8144c26e R13: 0000000000000030 R14: 0000000000000297 R15: 000000000000000e FS: 00007ed834282700(0000) GS:ffff88c03f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000068b240 CR3: 0000003ec13c5000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kernel (pid: 31053, threadinfo ffff883ec1036000, task ffff883ebd5d4100) Call Trace: release_pages+0xc5/0x260 free_pages_and_swap_cache+0x9d/0xc0 tlb_flush_mmu+0x5c/0x80 tlb_finish_mmu+0xe/0x50 exit_mmap+0xbd/0x120 mmput+0x49/0x120 exit_mm+0x122/0x160 do_exit+0x17a/0x430 do_group_exit+0x3d/0xb0 get_signal_to_deliver+0x247/0x480 do_signal+0x71/0x1b0 do_notify_resume+0x98/0xb0 int_signal+0x12/0x17 DWARF2 unwinder stuck at int_signal+0x12/0x17 Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11drivers/rtc/rtc-vt8500.c: fix handling of data passed in struct rtc_timeTony Prisk
commit 2f90b68309683f2c5765a1b04ca23d71e51f1494 upstream. tm_mon is 0..11, whereas vt8500 expects 1..12 for the month field, causing invalid date errors for January, and causing the day field to roll over incorrectly. The century flag is only handled in vt8500_rtc_read_time, but not set in vt8500_rtc_set_time. This patch corrects the behaviour of the century flag. Signed-off-by: Edgar Toernig <froese@gmx.de> Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11drivers/rtc/rtc-vt8500.c: correct handling of CR_24H bitfieldTony Prisk
commit 532db570e5181abc8f4f7bfa6c77c69ec2240198 upstream. Control register bitfield for 12H/24H mode is handled incorrectly. Setting CR_24H actually enables 12H mode. This patch renames the define and changes the initialization code to correctly set 24H mode. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Cc: Edgar Toernig <froese@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11CRIS: fix I/O macrosCorey Minyard
commit c24bf9b4cc6a0f330ea355d73bfdf1dae7e63a05 upstream. The inb/outb macros for CRIS are broken from a number of points of view, missing () around parameters and they have an unprotected if statement in them. This was breaking the compile of IPMI on CRIS and thus I was being annoyed by build regressions, so I fixed them. Plus I don't think they would have worked at all, since the data values were missing "&" and the outsl had a "3" instead of a "4" for the size. From what I can tell, this stuff is not used at all, so this can't be any more broken than it was before, anyway. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <starvik@axis.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11Bluetooth: cancel power_on work when unregistering the deviceGustavo Padovan
commit b9b5ef188e5a2222cfc16ef62a4703080750b451 upstream. We need to cancel the hci_power_on work in order to avoid it run when we try to free the hdev. [ 1434.201149] ------------[ cut here ]------------ [ 1434.204998] WARNING: at lib/debugobjects.c:261 debug_print_object+0x8e/0xb0() [ 1434.208324] ODEBUG: free active (active state 0) object type: work_struct hint: hci _power_on+0x0/0x90 [ 1434.210386] Pid: 8564, comm: trinity-child25 Tainted: G W 3.7.0-rc5-next- 20121112-sasha-00018-g2f4ce0e #127 [ 1434.210760] Call Trace: [ 1434.210760] [<ffffffff819f3d6e>] ? debug_print_object+0x8e/0xb0 [ 1434.210760] [<ffffffff8110b887>] warn_slowpath_common+0x87/0xb0 [ 1434.210760] [<ffffffff8110b911>] warn_slowpath_fmt+0x41/0x50 [ 1434.210760] [<ffffffff819f3d6e>] debug_print_object+0x8e/0xb0 [ 1434.210760] [<ffffffff8376b750>] ? hci_dev_open+0x310/0x310 [ 1434.210760] [<ffffffff83bf94e5>] ? _raw_spin_unlock_irqrestore+0x55/0xa0 [ 1434.210760] [<ffffffff819f3ee5>] __debug_check_no_obj_freed+0xa5/0x230 [ 1434.210760] [<ffffffff83785db0>] ? bt_host_release+0x10/0x20 [ 1434.210760] [<ffffffff819f4d15>] debug_check_no_obj_freed+0x15/0x20 [ 1434.210760] [<ffffffff8125eee7>] kfree+0x227/0x330 [ 1434.210760] [<ffffffff83785db0>] bt_host_release+0x10/0x20 [ 1434.210760] [<ffffffff81e539e5>] device_release+0x65/0xc0 [ 1434.210760] [<ffffffff819d3975>] kobject_cleanup+0x145/0x190 [ 1434.210760] [<ffffffff819d39cd>] kobject_release+0xd/0x10 [ 1434.210760] [<ffffffff819d33cc>] kobject_put+0x4c/0x60 [ 1434.210760] [<ffffffff81e548b2>] put_device+0x12/0x20 [ 1434.210760] [<ffffffff8376a334>] hci_free_dev+0x24/0x30 [ 1434.210760] [<ffffffff82fd8fe1>] vhci_release+0x31/0x60 [ 1434.210760] [<ffffffff8127be12>] __fput+0x122/0x250 [ 1434.210760] [<ffffffff811cab0d>] ? rcu_user_exit+0x9d/0xd0 [ 1434.210760] [<ffffffff8127bf49>] ____fput+0x9/0x10 [ 1434.210760] [<ffffffff81133402>] task_work_run+0xb2/0xf0 [ 1434.210760] [<ffffffff8106cfa7>] do_notify_resume+0x77/0xa0 [ 1434.210760] [<ffffffff83bfb0ea>] int_signal+0x12/0x17 [ 1434.210760] ---[ end trace a6d57fefbc8a8cc7 ]--- Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11Bluetooth: ath3k: Add support for VAIO VPCEH [0489:e027]Marcos Chaparro
commit acd9454433e28c1a365d8b069813c35c1c3a8ac3 upstream. Added Atheros AR3011 internal bluetooth device found in Sony VAIO VPCEH to the devices list. Before this, the bluetooth module was identified as an Foxconn / Hai bluetooth device [0489:e027], now it claims to be an AtherosAR3011 Bluetooth [0cf3:3005]. T: Bus=01 Lev=02 Prnt=02 Port=04 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e027 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Marcos Chaparro <marcos@mrkindustries.com.ar> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHzAndy Lutomirski
commit 812089e01b9f65f90fc8fc670d8cce72a0e01fbb upstream. Otherwise it fails like this on cards like the Transcend 16GB SDHC card: mmc0: new SDHC card at address b368 mmcblk0: mmc0:b368 SDC 15.0 GiB mmcblk0: error -110 sending status command, retrying mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb0 Tested on my Lenovo x200 laptop. [bhelgaas: changelog] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Chris Ball <cjb@laptop.org> CC: Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11solos-pci: fix double-free of TX skb in DMA modeDavid Woodhouse
commit cae49ede00ec3d0cda290b03fee55b72b49efc11 upstream. We weren't clearing card->tx_skb[port] when processing the TX done interrupt. If there wasn't another skb ready to transmit immediately, this led to a double-free because we'd free it *again* next time we did have a packet to send. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11ARM: missing ->mmap_sem around find_vma() in swp_emulate.cAl Viro
commit 7bf9b7bef881aac820bf1f2e9951a17b09bd7e04 upstream. find_vma() is *not* safe when somebody else is removing vmas. Not just the return value might get bogus just as you are getting it (this instance doesn't try to dereference the resulting vma), the search itself can get buggered in rather spectacular ways. IOW, ->mmap_sem really, really is not optional here. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11ARM: mm: use pteval_t to represent page protection valuesWill Deacon
commit 864aa04cd02979c2c755cb28b5f4fe56039171c0 upstream. When updating the page protection map after calculating the user_pgprot value, the base protection map is temporarily stored in an unsigned long type, causing truncation of the protection bits when LPAE is enabled. This effectively means that calls to mprotect() will corrupt the upper page attributes, clearing the XN bit unconditionally. This patch uses pteval_t to store the intermediate protection values, preserving the upper bits for 64-bit descriptors. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11tcp: RFC 5961 5.2 Blind Data Injection Attack MitigationEric Dumazet
[ Upstream commit 354e4aa391ed50a4d827ff6fc11e0667d0859b25 ] RFC 5961 5.2 [Blind Data Injection Attack].[Mitigation] All TCP stacks MAY implement the following mitigation. TCP stacks that implement this mitigation MUST add an additional input check to any incoming segment. The ACK value is considered acceptable only if it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <= SND.NXT). All incoming segments whose ACK value doesn't satisfy the above condition MUST be discarded and an ACK sent back. Move tcp_send_challenge_ack() before tcp_ack() to avoid a forward declaration. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Jerry Chu <hkchu@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11tcp: tcp_replace_ts_recent() should not be called from tcp_validate_incoming()Eric Dumazet
[ Upstream commit bd090dfc634ddd711a5fbd0cadc6e0ab4977bcaf ] We added support for RFC 5961 in latest kernels but TCP fails to perform exhaustive check of ACK sequence. We can update our view of peer tsval from a frame that is later discarded by tcp_ack() This makes timestamps enabled sessions vulnerable to injection of a high tsval : peers start an ACK storm, since the victim sends a dupack each time it receives an ACK from the other peer. As tcp_validate_incoming() is called before tcp_ack(), we should not peform tcp_replace_ts_recent() from it, and let callers do it at the right time. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: H.K. Jerry Chu <hkchu@google.com> Cc: Romain Francoise <romain@orebokech.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11tcp: refine SYN handling in tcp_validate_incomingEric Dumazet
[ Upstream commit e371589917011efe6ff8c7dfb4e9e81934ac5855 ] Followup of commit 0c24604b68fc (tcp: implement RFC 5961 4.2) As reported by Vijay Subramanian, we should send a challenge ACK instead of a dup ack if a SYN flag is set on a packet received out of window. This permits the ratelimiting to work as intended, and to increase correct SNMP counters. Suggested-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Vijay Subramanian <subramanian.vijay@gmail.com> Cc: Kiran Kumar Kella <kkiran@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11tcp: implement RFC 5961 4.2Eric Dumazet
[ Upstream commit 0c24604b68fc7810d429d6c3657b6f148270e528 ] Implement the RFC 5691 mitigation against Blind Reset attack using SYN bit. Section 4.2 of RFC 5961 advises to send a Challenge ACK and drop incoming packet, instead of resetting the session. Add a new SNMP counter to count number of challenge acks sent in response to SYN packets. (netstat -s | grep TCPSYNChallenge) Remove obsolete TCPAbortOnSyn, since we no longer abort a TCP session because of a SYN flag. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Kiran Kumar Kella <kkiran@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11tcp: implement RFC 5961 3.2Eric Dumazet
[ Upstream commit 282f23c6ee343126156dd41218b22ece96d747e3 ] Implement the RFC 5691 mitigation against Blind Reset attack using RST bit. Idea is to validate incoming RST sequence, to match RCV.NXT value, instead of previouly accepted window : (RCV.NXT <= SEG.SEQ < RCV.NXT+RCV.WND) If sequence is in window but not an exact match, send a "challenge ACK", so that the other part can resend an RST with the appropriate sequence. Add a new sysctl, tcp_challenge_ack_limit, to limit number of challenge ACK sent per second. Add a new SNMP counter to count number of challenge acks sent. (netstat -s | grep TCPChallengeACK) Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Kiran Kumar Kella <kkiran@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11net: sched: integer overflow fixStefan Hasko
[ Upstream commit d2fe85da52e89b8012ffad010ef352a964725d5f ] Fixed integer overflow in function htb_dequeue Signed-off-by: Stefan Hasko <hasko.stevo@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11sparc: huge_ptep_set_* functions need to call set_huge_pte_at()Dave Kleikamp
[ Upstream commit 6cb9c3697585c47977c42c5cc1b9fc49247ac530 ] Modifying the huge pte's requires that all the underlying pte's be modified. Version 2: added missing flush_tlb_page() Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11ftrace: Do not function trace inlined functionsSteven Rostedt
commit 45959ee7aa645815a5ce303a0ea1e48a21e67c6a upstream. When gcc inlines a function, it does not mark it with the mcount prologue, which in turn means that inlined functions are not traced by the function tracer. But if CONFIG_OPTIMIZE_INLINING is set, then gcc is allowed not to inline a function that is marked inline. Depending on the options and the compiler, a function may or may not be traced by the function tracer, depending on whether gcc decides to inline a function or not. This has caused several problems in the pass becaues gcc is not always consistent with what it decides to inline between different gcc versions. Some places should not be traced (like paravirt native_* functions) and these are mostly marked as inline. When gcc decides not to inline the function, and if that function should not be traced, then the ftrace function tracer will suddenly break when it use to work fine. This becomes even harder to debug when different versions of gcc will not inline that function, making the same kernel and config work for some gcc versions and not work for others. By making all functions marked inline to not be traced will remove the ambiguity that gcc adds when it comes to tracing functions marked inline. All gcc versions will be consistent with what functions are traced and having volatile working code will be removed. Note, only the inline macro when CONFIG_OPTIMIZE_INLINING is set needs to have notrace added, as the attribute __always_inline will force the function to be inlined and then not traced. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-12 17:15:22 +0000