summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-03-10net: add ColdFire support to the smc91x driverGreg Ungerer
Some embedded ColdFire based boards use the SMC 91x family of ethernet devices. (For example the Freescale M5249C3 and MoretonBay NETtel). Add IO access support to the SMC91x driver, and allow this driver to be configured for ColdFire platforms. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10asix: fix setting mac address for AX88772Jussi Kivilinna
Setting new MAC address only worked when device was set to promiscuous mode. Fix MAC address by writing new address to device using undocumented command AX_CMD_READ_NODE_ID+1. Patch is tested with AX88772 device. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David Hollis <dhollis@davehollis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10ipv6 ip6_tunnel: eliminate unused recursion field from ip6_tnl{}.YOSHIFUJI Hideaki / 吉藤英明
Commit a43912ab19... ("tunnel: eliminate recursion field") eliminated use of recursion field from tunnel structures, but its definition still exists in ip6_tnl{}. Let's remove that unused field. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10net: Fix dev_mc_add()Eric Dumazet
Commit 6e17d45a (net: add addr len check to dev_mc_add) added a bug in dev_mc_add(), since it can now exit with a lock imbalance. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10net: Annotates neigh_invalidate()Eric Dumazet
Annotates neigh_invalidate() with __releases() and __acquires() for sparse sake. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10tcp: Fix tcp_v4_rcv()Eric Dumazet
Commit d218d111 (tcp: Generalized TTL Security Mechanism) added a bug for TIMEWAIT sockets. We should not test min_ttl for TW sockets. Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10tg3: Fix tg3_poll_controller() passing wrong pointer to tg3_interrupt()Louis Rilling
Commit 09943a1819a240ff4a72f924d0038818fcdd0a90 Author: Matt Carlson <mcarlson@broadcom.com> Date: Fri Aug 28 14:01:57 2009 +0000 tg3: Convert ISR parameter to tnapi forgot to update tg3_poll_controller(), leading to intermittent crashes with netpoll. Fix this. Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: change checksumming default for HiperSocketsFrank Blaschka
Deactivate inbound checksumming on HiperSocket is a valid but dangerous optimization in case the frame is routed from an OSA network to an HiperSockets network. To go for sure we change the default to software checksumming. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: no recovery after layer mismatch (z/VM NICs)Ursula Braun
Depending on their definition in z/VM, virtual devices for z/VM VSWITCH or GuestLAN must be configured either in layer2 or in layer3 mode. If qeth detects a layer mismatch, device activation fails. Trying to recover from this error cannot help; thus scheduling a recovery should be avoided. In addition, since recovery is forbidden during online setting of a qeth device, existence of its network device is guaranteed for all dev_close() calls in qeth. The corresponding checks can be removed. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: set promisc off after trace disabling failureUrsula Braun
If HiperSockets Network Traffic Analyzer is switched off, but trace disabling fails somehow, the qeth driver does not switch off its promisc mode status. A following sniffer reactivation fails, since qeth does not see a need to reenable tracing. At the same time the code analyzing results of trace commands is restructured. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: l3 send dhcp in non pass thru modeFrank Blaschka
dhcp frames are valid IPv4 packets so there is no need to send them in pass thru mode. This allows dhcp packets to pass HiperSockets. Also the dhcp release frame is send out correctly with this patch. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: enable kmsg hash processing in qeth_core_sys.cUrsula Braun
provide qeth kmsg definitions to enable hash string generation for kernel message created with dev_err(). Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08MAINTAINERS: add netdev to CAN network layer and drivers entriesWolfgang Grandegger
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08tipc: filter out messages not intended for this hostNeil Horman
Port commit 20deb48d16fdd07ce2fdc8d03ea317362217e085 from git://tipc.cslab.ericsson.net/pub/git/people/allan/tipc.git Part of the large effort I'm trying to help with getting all the downstreamed code from windriver forward ported to the upstream tree Origional commit message Restore check to filter out inadverdently received messages This patch reimplements a check that allows TIPC to discard messages that are not intended for it. This check was present in TIPC 1.5/1.6, but was removed by accident during the development of TIPC 1.7; it has now been updated to account for new features present in TIPC 1.7 and reinserted into TIPC. The main benefit of this check is to filter out messages arriving from orphaned link endpoints, which can arise when a node exits the network and then re-enters it with a different TIPC network address (i.e. <Z.C.N> value). Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Origionally-authored-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08tipc: fix endianness on tipc subscriber messagesNeil Horman
Remove htohl implementation from tipc I was working on forward porting the downstream commits for TIPC and ran accross this one: http://tipc.cslab.ericsson.net/cgi-bin/gitweb.cgi?p=people/allan/tipc.git;a=commitdiff;h=894279b9437b63cbb02405ad5b8e033b51e4e31e I was going to just take it, when I looked closer and noted what it was doing. This is basically a routine to byte swap fields of data in sent/received packets for tipc, dependent upon the receivers guessed endianness of the peer when a connection is established. Asside from just seeming silly to me, it appears to violate the latest RFC draft for tipc: http://tipc.sourceforge.net/doc/draft-spec-tipc-02.txt Which, according to section 4.2 and 4.3.3, requires that all fields of all commands be sent in network byte order. So instead of just taking this patch, instead I'm removing the htohl function and replacing the calls with calls to ntohl in the rx path and htonl in the send path. As part of this fix, I'm also changing the subscr_cancel function, which searches the list of subscribers, using a memcmp of the entire subscriber list, for the entry to tear down. unfortunately it memcmps the entire tipc_subscr structure which has several bits that are private to the local side, so nothing will ever match. section 5.2 of the draft spec indicates the <type,upper,lower> tuple should uniquely identify a subscriber, so convert subscr_cancel to just match on those fields (properly endian swapped). I've tested this using the tipc test suite, and its passed without issue. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08ethtool: Use noinline_for_stackEric Dumazet
Use self documenting noinline_for_stack instead of duplicated comments. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08net/sunrpc: Convert (void)snprintf to snprintfJoe Perches
(Applies on top of "Remove uses of NIPQUAD, use %pI4") Casts to void of snprintf are most uncommon in kernel source. 9 use casts, 1301 do not. Remove the remaining uses in net/sunrpc/ Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08net/sunrpc: Remove uses of NIPQUAD, use %pI4Joe Perches
Originally submitted Jan 1, 2010 http://patchwork.kernel.org/patch/71221/ Convert NIPQUAD to the %pI4 format extension where possible Convert %02x%02x%02x%02x/NIPQUAD to %08x/ntohl Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08can: fix bfin_can build error after alloc_candev() changeBarry Song
Looks like commit a6e4bc530403 didn't include updates to drivers so the Blackfin CAN driver fails to build now. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08tcp: Fix tcp_make_synack()Eric Dumazet
Commit 4957faad (TCPCT part 1g: Responder Cookie => Initiator), part of TCP_COOKIE_TRANSACTION implementation, forgot to correctly size synack skb in case user data must be included. Many thanks to Mika Pentillä for spotting this error. Reported-by: Penttillä Mika <mika.penttila@ixonos.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08net: fix route cache rebuildsEric Dumazet
We added an automatic route cache rebuilding in commit 1080d709fb9d8cd43 but had to correct few bugs. One of the assumption of original patch, was that entries where kept sorted in a given way. This assumption is known to be wrong (commit 1ddbcb005c395518 gave an explanation of this and corrected a leak) and expensive to respect. Paweł Staszewski reported to me one of his machine got its routing cache disabled after few messages like : [ 2677.850065] Route hash chain too long! [ 2677.850080] Adjust your secret_interval! [82839.662993] Route hash chain too long! [82839.662996] Adjust your secret_interval! [155843.731650] Route hash chain too long! [155843.731664] Adjust your secret_interval! [155843.811881] Route hash chain too long! [155843.811891] Adjust your secret_interval! [155843.858209] vlan0811: 5 rebuilds is over limit, route caching disabled [155843.858212] Route hash chain too long! [155843.858213] Adjust your secret_interval! This is because rt_intern_hash() might be fooled when computing a chain length, because multiple entries with same keys can differ because of TOS (or mark/oif) bits. In the rare case the fast algorithm see a too long chain, and before taking expensive path, we call a helper function in order to not count duplicates of same routes, that only differ with tos/mark/oif bits. This helper works with data already in cpu cache and is not be very expensive, despite its O(N^2) implementation. Paweł Staszewski sucessfully tested this patch on his loaded router. Reported-and-tested-by: Paweł Staszewski <pstaszewski@itcare.pl> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08qlcnic: remove extra space from board namesAmit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08qlcnic: fix bios version checkAmit Kumar Salecha
Bios sub version from unified fw image is calculated incorrect. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08qlcnic: validate unified fw imageSucheta Chakraborty
Validate all sections of unified fw image, before accessing them, to avoid seg fault. Signed-off-by: Sucheta Chakraborty <sucheta@dut6195.unminc.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08qlcnic: fix multicast handlingSucheta Chakraborty
For promiscuous mode, driver send request to device for deleting multicast addresses and again it send request for adding them back while exiting from this mode, this is bad for performance. Just setting device in promiscuous mode is enough, no need to del/add multicast addresses. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08qlcnic: additional driver statistics.Sucheta Chakraborty
Statistics added for lro/lso bytes, count for tx stop queue and wake queue and skb alloc failure count. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08qlcnic: fix tx csum statusSucheta Chakraborty
Kernel default tx csum function (ethtool_op_get_tx_csum) doesn't show correct csum status. It takes various FLAGS (NETIF_F_ALL_CSUM) in account to show tx csum status, which driver doesn't set while disabling tx csum. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08be2net: remove unused code in be_load_fwAjit Khaparde
This patch cleans up some unused code from be_load_fw(). Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08be2net: remove usage of be_pci_funcAjit Khaparde
When PCI functions are virtuialized in applications by assigning PCI functions to VM (PCI passthrough), the be2net driver in the VM sees a different function number. So, use of PCI function number in any calculation will break existing code. This patch takes care of it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08tcp: Add SNMP counters for backlog and min_ttl dropsEric Dumazet
Commit 6b03a53a (tcp: use limited socket backlog) added the possibility of dropping frames when backlog queue is full. Commit d218d111 (tcp: Generalized TTL Security Mechanism) added the possibility of dropping frames when TTL is under a given limit. This patch adds new SNMP MIB entries, named TCPBacklogDrop and TCPMinTTLDrop, published in /proc/net/netstat in TcpExt: line netstat -s | egrep "TCPBacklogDrop|TCPMinTTLDrop" TCPBacklogDrop: 0 TCPMinTTLDrop: 0 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08net: add __must_check to sk_add_backlogZhu Yi
Add the "__must_check" tag to sk_add_backlog() so that any failure to check and drop packets will be warned about. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07bridge: Fix RCU race in br_multicast_stopHerbert Xu
Thanks to Paul McKenny for pointing out that it is incorrect to use synchronize_rcu_bh to ensure that pending callbacks have completed. Instead we should use rcu_barrier_bh. Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07bridge: Use RCU list primitive in __br_mdb_ip_getHerbert Xu
As Paul McKenney correctly pointed out, __br_mdb_ip_get needs to use the RCU list walking primitive in order to work correctly on platforms where data-dependency ordering is not guaranteed. Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07ipv6: Optmize translation between IPV6_PREFER_SRC_xxx and RT6_LOOKUP_F_xxx.YOSHIFUJI Hideaki / 吉藤英明
IPV6_PREFER_SRC_xxx definitions: | #define IPV6_PREFER_SRC_TMP 0x0001 | #define IPV6_PREFER_SRC_PUBLIC 0x0002 | #define IPV6_PREFER_SRC_COA 0x0004 RT6_LOOKUP_F_xxx definitions: | #define RT6_LOOKUP_F_SRCPREF_TMP 0x00000008 | #define RT6_LOOKUP_F_SRCPREF_PUBLIC 0x00000010 | #define RT6_LOOKUP_F_SRCPREF_COA 0x00000020 So, we can translate between these two groups by shift operation instead of multiple 'if's. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07cpmac: bump version to 0.5.2Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07cpmac: fallback to switch mode if no PHY chip foundFlorian Fainelli
If we were unable to detect a PHY on any of the MDIO bus id we tried instead of bailing out with -ENODEV, assume the MAC is connected to a switch and use MDIO bus 0. This unbreaks quite a lot of devices out there whose switch cannot be detected. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07cpmac: fix the receiving of 802.1q framesFlorian Fainelli
Despite what the comment above CPMAC_SKB_SIZE says, the hardware also needs to account for the FCS length in a received frame. This patch fix the receiving of 802.1q frames which have 4 more bytes. While at it unhardcode the definition and use the one from if_vlan.h. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07MAINTAINER: Correct CAN Maintainer responsibilities and pathsOliver Hartkopp
Update the CAN Maintainer responsibilities and add source paths. Additional the SocketCAN core ML is not subscribers-only anymore. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07another pegasus usb net devicePetko Manolov
This one removes trailing whitespace in pegasus.h and more importantly adds new Pegasus compatible device. Signed-off-by: Julian Brown <julian@codesourcery.com> Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07irda-usb: add error handling and fix leakDan Carpenter
If the call to kcalloc() fails then we should return -ENOMEM. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07sock.c: potential null dereferenceDan Carpenter
We test that "prot->rsk_prot" is non-null right before we dereference it on this line. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07ems_usb: cleanup: remove uneeded checkDan Carpenter
"skb" is alway non-null here, but even if it were null the check isn't needed because dev_kfree_skb() can handle it. This eliminates a smatch warning about dereferencing a variable before checking that it is non-null. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07bridge: cleanup: remove unneed checkDan Carpenter
We dereference "port" on the lines immediately before and immediately after the test so port should hopefully never be null here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07fix a race in ks8695_pollFigo.zhang
fix a race at the end of NAPI processing in ks8695_poll() function. Signed-off-by:Figo.zhang <figo1802@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-05s2io: Fixing debug messageBreno Leitao
Currently s2io is dumping debug messages using the interface name before it was allocated, showing a message like the following: s2io: eth%d: Ring Mem PHY: 0x7ef80000 s2io: s2io_reset: Resetting XFrame card eth%d This patch just fixes it, printing the pci bus information for the card instead of the interface name. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-05e1000e: fix packet corruption and tx hang during NFSv2Jesse Brandeburg
when receiving a particular type of NFS v2 UDP traffic, the hardware could DMA some bad data and then hang, possibly corrupting memory. Disable the NFS parsing in this hardware, verified to fix the bug. Originally reported and reproduced by RedHat's Neil Horman CC: nhorman@tuxdriver.com Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-05typhoon: fix incorrect use of smp_wmb()David Dillow
The typhoon driver was incorrectly using smp_wmb() to order memory accesses against IO to the NIC in a few instances. Use wmb() instead, which is required to actually order between memory types. Signed-off-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-05ethtool: Add direct access to ops->get_sset_countJeff Garzik
On 03/04/2010 09:26 AM, Ben Hutchings wrote: > On Thu, 2010-03-04 at 00:51 -0800, Jeff Kirsher wrote: >> From: Jeff Garzik<jgarzik@redhat.com> >> >> This patch is an alternative approach for accessing string >> counts, vs. the drvinfo indirect approach. This way the drvinfo >> space doesn't run out, and we don't break ABI later. > [...] >> --- a/net/core/ethtool.c >> +++ b/net/core/ethtool.c >> @@ -214,6 +214,10 @@ static noinline int ethtool_get_drvinfo(struct net_device *dev, void __user *use >> info.cmd = ETHTOOL_GDRVINFO; >> ops->get_drvinfo(dev,&info); >> >> + /* >> + * this method of obtaining string set info is deprecated; >> + * consider using ETHTOOL_GSSET_INFO instead >> + */ > > This comment belongs on the interface (ethtool.h) not the > implementation. Debatable -- the current comment is located at the callsite of ops->get_sset_count(), which is where an implementor might think to add a new call. Not all the numeric fields in ethtool_drvinfo are obtained from ->get_sset_count(). Hence the "some" in the attached patch to include/linux/ethtool.h, addressing your comment. > [...] >> +static noinline int ethtool_get_sset_info(struct net_device *dev, >> + void __user *useraddr) >> +{ > [...] >> + /* calculate size of return buffer */ >> + for (i = 0; i< 64; i++) >> + if (sset_mask& (1ULL<< i)) >> + n_bits++; > [...] > > We have a function for this: > > n_bits = hweight64(sset_mask); Agreed. I've attached a follow-up patch, which should enable my/Jeff's kernel patch to be applied, followed by this one. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-05ethtool: Add direct access to ops->get_sset_countJeff Garzik
This patch is an alternative approach for accessing string counts, vs. the drvinfo indirect approach. This way the drvinfo space doesn't run out, and we don't break ABI later. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-05net: smc91x: Support Qualcomm MSM development boards.David Brown
Signed-off-by: David Brown <davidb@quicinc.com> Signed-off-by: Daniel Walker <dwalker@codeaurora.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-12 10:23:29 +0000