summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2012-01-09build fix and driver fixJason Liu
2012-01-09Revert "ENGR00125411 eMMC: Boot Partition switch func used in MFG tool"Jason Liu
2012-01-09Revert "ENGR00126228 eMMC: Configure boot_partition_enable"Jason Liu
2012-01-09Revert "ENGR00133884 eMMC: improve boot_info message output"Jason Liu
2012-01-09Revert "ENGR00152547-03 [MX6Q]add SDHC3.0 support on uSDHC controller"Jason Liu
2012-01-09Revert "ENGR00154217 [MX6Q/D]fix mmc suspend/resume issue."Jason Liu
2012-01-09Revert "ENGR00139261 [MX6Q]support 8 bit MMC and eMMC DDR mode"Jason Liu
2012-01-09Revert "ENGR00155612-3 [mx6q]add delay after cmd6 for eMMC compatibility"Jason Liu
2012-01-09fix build errorJason Liu
2012-01-09ENGR00170005: Enable DVFS-CORE at bootRanjani Vaidyanathan
2012-01-09ENGR00169891 v4l2 capture: avoid streamon with only one buffer queuedXinyu Chen
2012-01-09ENGR00162729 MX6 ESAI: To reset the codec before initing a stream playbackingLionel Xu
2012-01-09ENGR00162181-4 MX6Q/GPMI : only decrease the DMA clock when GPMI is enabled.Huang Shijie
2012-01-09ENGR00162181-3 MX6Q/GPMI : decrease the DMA clock from 200M to 11MHuang Shijie
2012-01-09ENGR00162181-2 GPMI : select the MXS-DMA and MTD_CHARHuang Shijie
2012-01-09ENGR00162181-1 MX6Q/GPMI : init the GPMI blockHuang Shijie
2012-01-09ENGR00156855 [mx6q arm2] HDMI EDID read failedSandor Yu
2012-01-09ENGR00163052: CPUFREQ does not report correct frequencyRanjani Vaidyanathan
2012-01-09ENGR00169782 [MX6Q]: Add new AR6003 driver to 2.6.38, replacing staging oneRyan QIAN
2012-01-09ENGR00169764 fix linux-2.6.38 kernel build error.Liu Xiaowen
2012-01-09ENGR00162655 MX6 Sabre-lite SATA supportMahesh Mahadevan
2012-01-09ENGR00162797 SSI: add I2S mode for stereo playbackGary Zhang
2012-01-09ENGR00169661:Remove the discharge for VBUS and DPTony LIU
2012-01-09ENGR00169661:Remove the discharge for VBUS and DPTony LIU
2012-01-09ENGR00169661:Remove the discharge for VBUS and DPTony LIU
2012-01-09ENGR00169657 mxc_edid: no aspect vmode setting for detailed timing blockJason Chen
2012-01-09ENGR00161867 MX6Q: change CONFIG_FORCE_MAX_ZONEORDER from 13 to 14Wayne Zou
2012-01-09ENGR00163669-3 mipi_dsi: Add blank/unblank support for mipi dsi displayWayne Zou
2012-01-09ENGR00163669-2 mx6q mipi_dsi: Add support for mipi dsi displayWayne Zou
2012-01-09ENGR00163669-1 mxc fb: remove FB_EVENT_PREMODE_CHANGE for mxc fb driversWayne Zou
2012-01-09ENGR00169509-2 ipuv3 fb: change wait for vsync ioctl irq from eof to nfackJason Chen
2012-01-09ENGR00169509-1 ipuv3 fb: change wait for vsync ioctl irq from eof to nfackJason Chen
2012-01-09ENGR00169433 IMX/UART : fix a bug in UART RXHuang Shijie
2012-01-09ENGR00169402 IMX/UART : do optimization for UART TXHuang Shijie
2012-01-09ENGR00169390 merge ov5642 performance optimization into ics kernel.Liu Xiaowen
2012-01-09ENGR00169387 add user space memory allocation for v4l2.Liu Xiaowen
2012-01-09ENGR00163699-2 MX6Q: Add OV8820 mipi camera driverEven Xu
2012-01-09ENGR00163699-1 MX6Q: Add more mipi csi2 supported datatypeEven Xu
2012-01-09ENGR00169388-3 IMX/UART : fix the compiling errorHuang Shijie
2012-01-09ENGR00169388-2 MX6Q/UART : fill DMA fields for the platformdata of mx6qHuang Shijie
2012-01-09ENGR00169388-1 IMX/UART : add DMA fields for platform dataHuang Shijie
2012-01-09ENGR00163719 Upgrade to 4.6.3Loren Huang
2012-01-09ENGR00163703 uart: console write routing is unsafe on SMPXinyu Chen
2012-01-09ENGR00163603-4 MX6Q SDMA firmware : fix a bug in the UART receiving.Huang Shijie
2012-01-09ENGR00163603-3 MX6Q/UART : add DMA support to uart driverHuang Shijie
2012-01-09ENGR00163603-2 IMX/SDMA : save the real count for one DMA transaction.Huang Shijie
2012-01-09ENGR00163603-1 MX6Q/UART : enable DMA support in the MX6Q-ARM2 boardHuang Shijie
2012-01-09ENGR00163275 [MX6]Fix PLL enable fail panicAnson Huang
2012-01-09ENGR00163616 [mx6q]hdmi will hang in daily build imageTony Lin
2012-01-09ENGR00163615 mx6q: sabrelite RevC: change GPIO for flexcanDong Aisheng
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-14 11:57:16 +0000