summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2012-10-29ENGR00230967 Optimize the keymap for evk and dc2 boardLiGang
2012-10-29ENGR00230854 Add GPIO button for power keyLiGang
2012-10-24ENGR00230371-02 Add HDMI resolution select featureLiGang
2012-10-24ENGR00230371-01 Add HDMI resolution select featureLiGang
2012-10-18ENGR00230027 Fix cts failure in imx6sl_evkb02247
2012-10-17ENGR00229474-02 Integrate HDMI, hdmi/eink/lcd supported in single imageLiGang
2012-10-17ENGR00229474-01 Integrate HDMI, hdmi/eink/lcd supported in single imageLiGang
2012-10-15ENGR00223348 EPDC: Unable to enable DISPLAY regulatorJack Lee
2012-10-15Merge commit 'rel_imx_3.0.35_12.10.02_RC1' intoJack Lee
2012-10-09ENGR00227568 elcdif: fix fb wait for vsync timeout when suspend and resumeRobby Cai
2012-10-09ENGR00227502-2 mx6sl: add csi v4l2 platform deviceRobby Cai
2012-10-09ENGR00227502-1 csi/v4l2: Implement probe and remove function for csi v4l2 driverRobby Cai
2012-10-09ENGR00227241 mx6sl: clk: sdhc can not work at lp idle modeRyan QIAN
2012-10-09ENGR00220469 mmc: sdio: claim host on suspend and release on resumingRyan QIAN
2012-10-09ENGR00226392 MX6SL Bluetooth: Setup uart2 to enable bluetoothLionel Xu
2012-10-09ENGR00227477 mx6qdl: system resume fail due to DDR not accessableAnson Huang
2012-10-08ENGR00227425 mx6sl: Need to save all registers before calling C functionAnson Huang
2012-10-08ENGR00225700: ARM: mx6sl: Fix suspend/resume lockupRobert Lee
2012-10-08ENGR00227422: ARM: imx6sl: Adjust ARM and SOC stby voltagesRobert Lee
2012-10-08ENGR00227426 MX6SL-Fix bugs in low power IDLE modeRanjani Vaidyanathan
2012-10-09ENGR00227249 MX6SL-Add support for low latency STANDBY mode.Ranjani Vaidyanathan
2012-10-09ENGR00227250 MX6SL/MX6DL-Fix IRAM sizeRanjani Vaidyanathan
2012-10-09ENGR00227020: devices-common imx_dma_data duplicate struct definitionAdrian Alonso
2012-10-02ENGR00180348 EPDC: invalid data when width is 2048 or greaterMichael Minnick
2012-09-29ENGR00225981-8 csi/imx6sl: add the platform-related settingRobby Cai
2012-09-29ENGR00225981-7 csi: Unify the api set_mclk_rateRobby Cai
2012-09-29ENGR00225981-6 csi: Add PxP post-processing for CSCRobby Cai
2012-09-29ENGR00225981-5 imx6sl: update the defconfigRobby Cai
2012-09-29ENGR00225981-4 IPU: Remove IPU fb build for MX6SLRobby Cai
2012-09-29ENGR00225981-3 csi: Add csi driver support on MX6SLRobby Cai
2012-09-29ENGR00225981-2 pxp: fix the coefficient for the YCbCr-RGB CSCRobby Cai
2012-09-29ENGR00225981-1 pxp: add UYVY input pixel formatRobby Cai
2012-09-29ENGR00225960-04 mx6sl evk: Add sii902x GPIO/IOMux settingSandor Yu
2012-09-29ENGR00225960-03 sii902x: Added sii902x HDMI driver with ELCDIF FBSandor Yu
2012-09-29ENGR00225960-02 FB: Support sii902x HDMI driver in ELCDIF FBSandor Yu
2012-09-29ENGR00225960-01 Sii902x HDMI: added SII902x Config variableSandor Yu
2012-09-29ENGR00225735-3 GPU: add gpu regulator disable/enable in gpu driverRobin Gong
2012-09-29ENGR00225735-2 VPU: add vpu regulator enable/disable in driverRobin Gong
2012-09-29ENGR00225735-1 PU anatop: PU regulator can be disabled/enabled by driversRobin Gong
2012-09-29ENGR00224514 EVK-MX6SL: Change key report property to none repeatLiGang
2012-09-27ENGR00225894 MX6SL-Improve system IDLE power numbersRanjani Vaidyanathan
2012-09-27ENGR00226095-2 SPDIF: add HDMI AUDIO in device name in mx6_sl evkGary Zhang
2012-09-27ENGR00226095-1 MX6 SL: add SPDIF support in EVKGary Zhang
2012-09-27ENGR00226080 Update GC2000/GC320 AXI bus cache attributeLoren Huang
2012-09-27ENGR00226096 mx6sl: remove high set point for usdhcRyan QIAN
2012-09-27ENGR00223797-10 ARM:MX6 Kconfig:Support MX6_CLK_FOR_BOOTUI_TRANSLiu Ying
2012-09-27ENGR00223797-7 MX6 SabreSD:Fix ipuv3 fb platform driver registerLiu Ying
2012-09-27ENGR00223797-6 MX6 SabreSD:Initialize late init for IPUv3 fb pdataLiu Ying
2012-09-27ENGR00223797-5 MX6 SabreSD:Initialize bypass reset for IPUv3 pdataLiu Ying
2012-09-27ENGR00223797-4 IPUv3 fb:Support framebuffer late initLiu Ying
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-14 12:42:16 +0000