summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-02-23ASoC: i.MX SSI: Fix DSP_A format.Javier Martin
According to i.MX27 Reference Manual (p 1593) TXBIT0 bit selects whether the most significant or the less significant part of the data word written to the FIFO is transmitted. As DSP_A is the same as DSP_B with a data offset of 1 bit, it doesn't make any sense to remove TXBIT0 bit here. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-23ASoC: dapm: Check for bias level when powering downMark Brown
Recent enhancements in the bias management means that we might not be in standby when the CODEC is idle and can have active widgets without being in full power mode but the shutdown functionality assumes these things. Add checks for the bias level at each stage so that we don't do transitions other than the ON->PREPARE->STANDBY->OFF ones that the drivers are expecting. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2012-02-21ASoC: ak4642: fixup HeadPhone L/R dapm settingsKuninori Morimoto
Current ak4642 driver had wrong dapm settings for headphone L/R. If you select headphone L, and select R after that, headphone L setting was removed by R settings. This patch fixes it up. It provides just "Headphone Enable" to user side Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-14ASoC: wm8962: Fix sidetone enumeration textsMark Brown
The sidetone enumeration texts have left and right swapped. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-09ASoC: fsi: fixup fsi_pointer() calculation methodKuninori Morimoto
current fsi_pointer() calculation was not correct for FSI driver. This patch fix it up. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-08ASoC: wm8994: Disable line output discharge prior to ramping VMIDMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-08ASoC: wm8994: Fix typo in VMID ramp settingMark Brown
The VMID ramp rate is supposed to be 0x3, not 11b. Fix that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-06ASoC: wm8994: Enabling VMID should take a runtime PM referenceMark Brown
We can enable VMID independently of the bias in some use cases so we need to ensure that the core device is powered up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-01ASoC: wm_hubs: Correct line input to line output 2 pathsMark Brown
The second line output mixer has the controls for the line input bypasses in the opposite order. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-01ASoC: cs42l73: Fix Output [X|A|V]SP_SCLK Sourcing Mode setting for master modeAxel Lin
For master mode, set Output [X|A|V]SP_SCLK Sourcing Mode to MCLK Mode. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-01ASoC: wm8962: Fix word length configurationSusan Gao
Signed-off-by: Susan Gao <sgao@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-01-31ASoC: core: Better support for idle_bias_off suspend ignoresMark Brown
If an idle_bias_off device is in any state other than off then it is still active for some reason (typically a low power function such as accessory detection). This wasn't an issue when the feature was implemented as we always went to _ON for any active function, subsequent power improvements have changed things. With the modern way of doing things we should overhaul the infrastructure to allow devices to explicitly take references for these functions but that's a much more invasive change and will require driver updates to deploy, this will bring the framework into line with the existing driver set before we do that work. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-01-31ASoC: wm8994: Remove ASoC level register cache syncMark Brown
Now we've switched over to regmap the ASoC level cache sync will be ineffectual and potentially harmful as there is no longer an ASoC level cache. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-31ASoC: wm_hubs: Fix routing of input PGAs to line output mixerMark Brown
IN1L/R is routed to both line output mixers, we don't route IN1 to LINEOUT1 and IN2 to LINEOUT2. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-01-30ASoC: neo1973_wm8753: remove references to the neo1973-gta01 machineDenis 'GNUtoo' Carikli
The Openmoko GTA01 machine has been removed from the machine ID database, so we need to remove references to it as well. Without that fix we have: sound/soc/samsung/neo1973_wm8753.c: In function ‘neo1973_wm8753_init’: sound/soc/samsung/neo1973_wm8753.c:325:2: error: implicit declaration of function ‘machine_is_neo1973_gta01’ Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-27ASoC: wm_hubs: fix wrong bits for LINEOUT2 N/P mixerUK KIM
Signed-off-by: UK KIM <w0806.kim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-01-26ASoC: wm_hubs: Enable line out VMID buffer for single ended line outputsMark Brown
For optimal performance the single ended line outputs require that the line output VMID buffer be enabled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-01-25ASoC: wm5100: Mark register cache as dirty when regulators are disabledMark Brown
Otherwise we won't resync later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-25ASoC: wm8962: Mark register cache as dirty when regulators are disabledMark Brown
Otherwise we won't resync later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-25ASoC: wm8996: Mark register cache as dirty when regulators are disabledMark Brown
Otherwise we won't resync later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-25ASoC: wm5100: Fix microphone configurationMark Brown
We need to write the configuration for each microphone to a different register. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-01-25ASoC: wm5100: Make sure we switch to button reporting modeMark Brown
When we have identified an accessory make sure we've flagged that we've done so in order to make sure we always report buttons and don't continue to polarity flip. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-24ASoC: wm2000: Fix use-after-free - don't release_firmware() twice on errorJesper Juhl
In wm2000_i2c_probe(), if we take the true branch in " ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm2000, NULL, 0); if (ret != 0) goto err_fw; " then we'll release_firmware(fw) at the 'err_fw' label. But we've already done that just a few lines above. That's a use-after-free bug. This patch restructures the code so that we always call release_firmware(fw) before leaving the function, but only ever call it once. This means that we have to initialize 'fw' to NULL since some paths may now end up calling it without having called request_firmware(), but since request_firmware() deals gracefully with NULL pointers, we are fine if we just NULL initialize it. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-23ASoC: wm8958: Use correct format string in dev_err() callJesper Juhl
To print a value of type size_t one should use %zd, not %d. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-22ASoC: wm8996: Call _POST_PMU callback for CPVDDMark Brown
We should be allowing a 5ms delay after the charge pump is started in order to ensure it has finished ramping. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2012-01-20ASoC: mxs: Fix mxs-saif timeoutFabio Estevam
On a mx28evk board the following errors happens on mxs-sgtl5000 probe: [ 0.660000] saif0_clk_set_rate: divider writing timeout [ 0.670000] mxs-sgtl5000: probe of mxs-sgtl5000.0 failed with error -110 [ 0.670000] ALSA device list: [ 0.680000] No soundcards found. This timeout happens because clk_set_rate will result in writing to the DIV bits of register HW_CLKCTRL_SAIF0 with the saif clock gated (CLKGATE bit set to one). MX28 Reference states the following about CLKGATE: "The DIV field can change ONLY when this clock gate bit field is low." So call clk_prepare_enable prior to clk_set_rate to fix this problem. After this change the mxs-saif driver can be correctly probed and audio is functional. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Disable register synchronisation for low frequency WM8996 SYSCLKMark Brown
With a low frequency SYSCLK and a fast I2C clock register synchronisation may occasionally take too long to take effect, causing I/O issues. Disable synchronisation in order to avoid any issues. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2012-01-20ASoC: Don't go through cache when applying WM5100 rev A updatesMark Brown
These are all to either uncached registers or fixes to register defaults, in the former case the cache won't do anything and in the latter case we're fixing things so the cache sync will do the right thing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2012-01-20ASoC: Mark WM5100 register map cache only when going into BIAS_OFFMark Brown
Writing to the registers won't work if we do actually manage to hit a fully powered off state. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2012-01-20ASoC: tlv320aic32x4: always enable analouge blockWolfram Sang
Register LDOCTLEN must always be initialized to clear the analog power control bit, otherwise the analog block will stay deactivated. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: tlv320aic32x4: always enable dividersWolfram Sang
Dividers (such as MDAC) are always needed, independent of the codec being I2S master or slave. Needed on a custom board where the codec has to be slave. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: sgtl5000: Fix wrong register name in restoreZeng Zhaoming
Correct SGTL5000_CHIP_CLK_CTRL to SGTL5000_CHIP_REF_CTRL in sgtl5000_restore_regs(), and add comment to explain the restore order. Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Zeng Zhaoming <zengzm.kernel@gmail.com> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-19Linux 3.3-rc1v3.3-rc1Linus Torvalds
2012-01-19Merge branches 'sched-urgent-for-linus', 'perf-urgent-for-linus' and ↵Linus Torvalds
'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/accounting, proc: Fix /proc/stat interrupts sum * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracepoints/module: Fix disabling tracepoints with taint CRAP or OOT x86/kprobes: Add arch/x86/tools/insn_sanity to .gitignore x86/kprobes: Fix typo transferred from Intel manual * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits x86, tsc: Fix SMI induced variation in quick_pit_calibrate() x86, opcode: ANDN and Group 17 in x86-opcode-map.txt x86/kconfig: Move the ZONE_DMA entry under a menu x86/UV2: Add accounting for BAU strong nacks x86/UV2: Ack BAU interrupt earlier x86/UV2: Remove stale no-resources test for UV2 BAU x86/UV2: Work around BAU bug x86/UV2: Fix BAU destination timeout initialization x86/UV2: Fix new UV2 hardware by using native UV2 broadcast mode x86: Get rid of dubious one-bit signed bitfield
2012-01-19Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
gpio bug fixes for v3.3 * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: gpio: tps65910: Use correct offset for gpio initialization gpio/it8761e: Restrict it8761e gpio driver to x86. gpio-ml-ioh: cleanup __iomem annotation usage gpio-ml-ioh: cleanup NULL pointer checking gpio-pch: cleanup __iomem annotation usage gpio-pch: cleanup NULL pointer checking
2012-01-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: qnx4: don't leak ->BitMap on late failure exits qnx4: reduce the insane nesting in qnx4_checkroot() qnx4: di_fname is an array, for crying out loud... vfs: remove printk from set_nlink() wake up s_wait_unfrozen when ->freeze_fs fails
2012-01-19x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bitsH. Peter Anvin
In checkin 303395ac3bf3 x86: Generate system call tables and unistd_*.h from tables the feature macros in <asm/unistd.h> were unified between 32 and 64 bits. Unfortunately 32 bits requires __ARCH_WANT_SYS_IPC and this was inadvertently dropped. Reported-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/CALLzPKbeXN5gdngo8uYYU8mAow=XhrwBFBhKfG811f37BubQOg@mail.gmail.com
2012-01-19Merge remote-tracking branch 'linus/master' into x86/urgentH. Peter Anvin
2012-01-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: Permit key_serial() to be called with a const key pointer keys: fix user_defined key sparse messages ima: fix cred sparse warning MPILIB: Add a missing ENOMEM check
2012-01-19qnx4: don't leak ->BitMap on late failure exitsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-19qnx4: reduce the insane nesting in qnx4_checkroot()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-19qnx4: di_fname is an array, for crying out loud...Al Viro
(struct qnx4_inode_entry *)(bh->b_data + some_offset)->di_fname is not going to be NULL, TYVM... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-19KEYS: Permit key_serial() to be called with a const key pointerDavid Howells
Permit key_serial() to be called with a const key pointer. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2012-01-19keys: fix user_defined key sparse messagesMimi Zohar
Replace the rcu_assign_pointer() calls with rcu_assign_keypointer(). Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2012-01-19ima: fix cred sparse warningMimi Zohar
Fix ima_policy.c sparse "warning: dereference of noderef expression" message, by accessing cred->uid using current_cred(). Changelog v1: - Change __cred to just cred (based on David Howell's comment) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2012-01-18uml: fix compile for x86-64Linus Torvalds
Randy Dunlap reports that we get arch/x86/um/shared/sysdep/ptrace.h:7:20: error: redefinition of 'regs_return_value' arch/x86/um/shared/sysdep/ptrace.h:7:20: note: previous definition of 'regs_return_value' was here when compiling UML for x86-64. Stephen Rothwell root-caused it and says: "Caused by commit d7e7528bcd45 ("Audit: push audit success and retcode into arch ptrace.h") (another patch that was never in linux-next :-(). This file now needs protection against double inclusion." so let's do as the man says. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Analyzed-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-19MPILIB: Add a missing ENOMEM checkDavid Howells
Add a missing ENOMEM check. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2012-01-18Merge branch 'for-next-merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending * 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: ib_srpt: Initial SRP Target merge for v3.3-rc1
2012-01-18Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits) target: Set additional sense length field in sense data target: Remove legacy device status check from transport_execute_tasks target: Remove __transport_execute_tasks() for each processing context target: Remove extra se_device->execute_task_lock access in fast path target: Drop se_device TCQ queue_depth usage from I/O path target: Fix possible NULL pointer with __transport_execute_tasks target: Remove TFO->check_release_cmd() fabric API caller tcm_fc: Convert ft_send_work to use target_submit_cmd target: Add target_submit_cmd() for process context fabric submission target: Make target_put_sess_cmd use target_release_cmd_kref target: Set response format in INQUIRY response target: tcm_mod_builder: small fixups Documentation/target: Fix tcm_mod_builder.py build breakage target: remove overagressive ____cacheline_aligned annoations tcm_loop: bump max_sectors target/configs: remove trailing newline from udev_path and alias iscsi-target: fix chap identifier simple_strtoul usage target: remove useless casts target: simplify target_check_cdb_and_preempt target: Move core_scsi3_check_cdb_abort_and_preempt ...
2012-01-18Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux This includes initial support for the recently published ACPI 5.0 spec. In particular, support for the "hardware-reduced" bit that eliminates the dependency on legacy hardware. APEI has patches resulting from testing on real hardware. Plus other random fixes. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (52 commits) acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec intel_idle: Split up and provide per CPU initialization func ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2 ACPI processor: Remove unneeded cpuidle_unregister_driver call intel idle: Make idle driver more robust intel_idle: Fix a cast to pointer from integer of different size warning in intel_idle ACPI: kernel-parameters.txt : Add intel_idle.max_cstate intel_idle: remove redundant local_irq_disable() call ACPI processor: Fix error path, also remove sysdev link ACPI: processor: fix acpi_get_cpuid for UP processor intel_idle: fix API misuse ACPI APEI: Convert atomicio routines ACPI: Export interfaces for ioremapping/iounmapping ACPI registers ACPI: Fix possible alignment issues with GAS 'address' references ACPI, ia64: Use SRAT table rev to use 8bit or 16/32bit PXM fields (ia64) ACPI, x86: Use SRAT table rev to use 8bit or 32bit PXM fields (x86/x86-64) ACPI: Store SRAT table revision ACPI, APEI, Resolve false conflict between ACPI NVS and APEI ACPI, Record ACPI NVS regions ACPI, APEI, EINJ, Refine the fix of resource conflict ...
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-17 04:16:38 +0000